aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-09-09drm/gma500: Fix BUG: sleeping function called from invalid context errorsHans de Goede1-4/+7
gma_crtc_page_flip() was holding the event_lock spinlock while calling crtc_funcs->mode_set_base() which takes ww_mutex. The only reason to hold event_lock is to clear gma_crtc->page_flip_event on mode_set_base() errors. Instead unlock it after setting gma_crtc->page_flip_event and on errors re-take the lock and clear gma_crtc->page_flip_event it it is still set. This fixes the following WARN/stacktrace: [ 512.122953] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:870 [ 512.123004] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1253, name: gnome-shell [ 512.123031] preempt_count: 1, expected: 0 [ 512.123048] RCU nest depth: 0, expected: 0 [ 512.123066] INFO: lockdep is turned off. [ 512.123080] irq event stamp: 0 [ 512.123094] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 512.123134] hardirqs last disabled at (0): [<ffffffff8d0ec28c>] copy_process+0x9fc/0x1de0 [ 512.123176] softirqs last enabled at (0): [<ffffffff8d0ec28c>] copy_process+0x9fc/0x1de0 [ 512.123207] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 512.123233] Preemption disabled at: [ 512.123241] [<0000000000000000>] 0x0 [ 512.123275] CPU: 3 PID: 1253 Comm: gnome-shell Tainted: G W 5.19.0+ #1 [ 512.123304] Hardware name: Packard Bell dot s/SJE01_CT, BIOS V1.10 07/23/2013 [ 512.123323] Call Trace: [ 512.123346] <TASK> [ 512.123370] dump_stack_lvl+0x5b/0x77 [ 512.123412] __might_resched.cold+0xff/0x13a [ 512.123458] ww_mutex_lock+0x1e/0xa0 [ 512.123495] psb_gem_pin+0x2c/0x150 [gma500_gfx] [ 512.123601] gma_pipe_set_base+0x76/0x240 [gma500_gfx] [ 512.123708] gma_crtc_page_flip+0x95/0x130 [gma500_gfx] [ 512.123808] drm_mode_page_flip_ioctl+0x57d/0x5d0 [ 512.123897] ? drm_mode_cursor2_ioctl+0x10/0x10 [ 512.123936] drm_ioctl_kernel+0xa1/0x150 [ 512.123984] drm_ioctl+0x21f/0x420 [ 512.124025] ? drm_mode_cursor2_ioctl+0x10/0x10 [ 512.124070] ? rcu_read_lock_bh_held+0xb/0x60 [ 512.124104] ? lock_release+0x1ef/0x2d0 [ 512.124161] __x64_sys_ioctl+0x8d/0xd0 [ 512.124203] do_syscall_64+0x58/0x80 [ 512.124239] ? do_syscall_64+0x67/0x80 [ 512.124267] ? trace_hardirqs_on_prepare+0x55/0xe0 [ 512.124300] ? do_syscall_64+0x67/0x80 [ 512.124340] ? rcu_read_lock_sched_held+0x10/0x80 [ 512.124377] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 512.124411] RIP: 0033:0x7fcc4a70740f [ 512.124442] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 18 48 8b 44 24 18 64 48 2b 04 25 28 00 00 [ 512.124470] RSP: 002b:00007ffda73f5390 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 512.124503] RAX: ffffffffffffffda RBX: 000055cc9e474500 RCX: 00007fcc4a70740f [ 512.124524] RDX: 00007ffda73f5420 RSI: 00000000c01864b0 RDI: 0000000000000009 [ 512.124544] RBP: 00007ffda73f5420 R08: 000055cc9c0b0cb0 R09: 0000000000000034 [ 512.124564] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000c01864b0 [ 512.124584] R13: 0000000000000009 R14: 000055cc9df484d0 R15: 000055cc9af5d0c0 [ 512.124647] </TASK> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Patrik Jakobsson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-09-09ipvlan: Fix out-of-bound bugs caused by unset skb->mac_headerLu Wei1-2/+4
If an AF_PACKET socket is used to send packets through ipvlan and the default xmit function of the AF_PACKET socket is changed from dev_queue_xmit() to packet_direct_xmit() via setsockopt() with the option name of PACKET_QDISC_BYPASS, the skb->mac_header may not be reset and remains as the initial value of 65535, this may trigger slab-out-of-bounds bugs as following: ================================================================= UG: KASAN: slab-out-of-bounds in ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan] PU: 2 PID: 1768 Comm: raw_send Kdump: loaded Not tainted 6.0.0-rc4+ #6 ardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 all Trace: print_address_description.constprop.0+0x1d/0x160 print_report.cold+0x4f/0x112 kasan_report+0xa3/0x130 ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan] ipvlan_start_xmit+0x29/0xa0 [ipvlan] __dev_direct_xmit+0x2e2/0x380 packet_direct_xmit+0x22/0x60 packet_snd+0x7c9/0xc40 sock_sendmsg+0x9a/0xa0 __sys_sendto+0x18a/0x230 __x64_sys_sendto+0x74/0x90 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is: 1. packet_snd() only reset skb->mac_header when sock->type is SOCK_RAW and skb->protocol is not specified as in packet_parse_headers() 2. packet_direct_xmit() doesn't reset skb->mac_header as dev_queue_xmit() In this case, skb->mac_header is 65535 when ipvlan_xmit_mode_l2() is called. So when ipvlan_xmit_mode_l2() gets mac header with eth_hdr() which use "skb->head + skb->mac_header", out-of-bound access occurs. This patch replaces eth_hdr() with skb_eth_hdr() in ipvlan_xmit_mode_l2() and reset mac header in multicast to solve this out-of-bound bug. Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Lu Wei <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-09Merge tag 'vfio-v6.0-rc5' of https://github.com/awilliam/linux-vfioLinus Torvalds1-0/+12
Pull VFIO fix from Alex Williamson: - Fix zero page refcount leak (Alex Williamson) * tag 'vfio-v6.0-rc5' of https://github.com/awilliam/linux-vfio: vfio/type1: Unpin zero pages
2022-09-09drm/meson: Fix OSD1 RGB to YCbCr coefficientStuart Menefy1-1/+1
VPP_WRAP_OSD1_MATRIX_COEF22.Coeff22 is documented as being bits 0-12, not 16-28. Without this the output tends to have a pink hue, changing it results in better color accuracy. The vendor kernel doesn't use this register. However the code which sets VIU2_OSD1_MATRIX_COEF22 also uses bits 0-12. There is a slightly different style of registers for configuring some of the other matrices, which do use bits 16-28 for this coefficient, but those have names ending in MATRIX_COEF22_30, and this is not one of those. Signed-off-by: Stuart Menefy <[email protected]> Fixes: 728883948b0d ("drm/meson: Add G12A Support for VIU setup") Reviewed-by: Neil Armstrong <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-09-09drm/meson: Correct OSD1 global alpha valueStuart Menefy1-1/+1
VIU_OSD1_CTRL_STAT.GLOBAL_ALPHA is a 9 bit field, so the maximum value is 0x100 not 0xff. This matches the vendor kernel. Signed-off-by: Stuart Menefy <[email protected]> Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller") Reviewed-by: Neil Armstrong <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-09-09thunderbolt: Add support for Intel Maple Ridge single port controllerGil Fine2-0/+2
Add support for Maple Ridge discrete USB4 host controller from Intel which has a single USB4 port (versus the already supported dual port Maple Ridge USB4 host controller). Cc: [email protected] Signed-off-by: Gil Fine <[email protected]> Signed-off-by: Mika Westerberg <[email protected]>
2022-09-08perf: RISC-V: fix access beyond allocated arraySergey Matyukevich1-1/+1
SBI firmware should report total number of firmware and hardware counters including unused ones or special ones. In this case the kernel doesn't need to make any assumptions about gaps in reported counters, e.g. excluded timer counter. That was fixed in OpenSBI v1.1 by commit 3f66465fb6bf ("lib: pmu: allow to use the highest available counter"). This kernel patch has no effect if SBI firmware behaves correctly. However it eliminates access beyond the allocated pmu_ctr_list if the kernel is used with OpenSBI older than v1.1. Fixes: e9991434596f ("RISC-V: Add perf platform driver based on SBI PMU extension") Signed-off-by: Sergey Matyukevich <[email protected]> Reviewed-by: Atish Patra <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2022-09-08soc: sunxi: sram: Fix debugfs info for A64 SRAM CSamuel Holland1-2/+2
The labels were backward with respect to the register values. The SRAM is mapped to the CPU when the register value is 1. Fixes: 5e4fb6429761 ("drivers: soc: sunxi: add support for A64 and its SRAM C") Acked-by: Jernej Skrabec <[email protected]> Signed-off-by: Samuel Holland <[email protected]> Signed-off-by: Jernej Skrabec <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-09-08soc: sunxi: sram: Fix probe function ordering issuesSamuel Holland1-8/+5
Errors from debugfs are intended to be non-fatal, and should not prevent the driver from probing. Since debugfs file creation is treated as infallible, move it below the parts of the probe function that can fail. This prevents an error elsewhere in the probe function from causing the file to leak. Do the same for the call to of_platform_populate(). Finally, checkpatch suggests an octal literal for the file permissions. Fixes: 4af34b572a85 ("drivers: soc: sunxi: Introduce SoC driver to map SRAMs") Fixes: 5828729bebbb ("soc: sunxi: export a regmap for EMAC clock reg on A64") Reviewed-by: Jernej Skrabec <[email protected]> Signed-off-by: Samuel Holland <[email protected]> Tested-by: Heiko Stuebner <[email protected]> Signed-off-by: Jernej Skrabec <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-09-08soc: sunxi: sram: Prevent the driver from being unboundSamuel Holland1-3/+2
This driver exports a regmap tied to the platform device (as opposed to a syscon, which exports a regmap tied to the OF node). Because of this, the driver can never be unbound, as that would destroy the regmap. Use builtin_platform_driver_probe() to enforce this limitation. Fixes: 5828729bebbb ("soc: sunxi: export a regmap for EMAC clock reg on A64") Reviewed-by: Jernej Skrabec <[email protected]> Signed-off-by: Samuel Holland <[email protected]> Reviewed-by: Heiko Stuebner <[email protected]> Tested-by: Heiko Stuebner <[email protected]> Signed-off-by: Jernej Skrabec <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-09-08soc: sunxi: sram: Actually claim SRAM regionsSamuel Holland1-0/+1
sunxi_sram_claim() checks the sram_desc->claimed flag before updating the register, with the intent that only one device can claim a region. However, this was ineffective because the flag was never set. Fixes: 4af34b572a85 ("drivers: soc: sunxi: Introduce SoC driver to map SRAMs") Reviewed-by: Jernej Skrabec <[email protected]> Signed-off-by: Samuel Holland <[email protected]> Reviewed-by: Heiko Stuebner <[email protected]> Tested-by: Heiko Stuebner <[email protected]> Signed-off-by: Jernej Skrabec <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-09-08iavf: Fix cached head and tail value for iavf_get_tx_pendingBrett Creeley1-1/+4
The underlying hardware may or may not allow reading of the head or tail registers and it really makes no difference if we use the software cached values. So, always used the software cached values. Fixes: 9c6c12595b73 ("i40e: Detection and recovery of TX queue hung logic moved to service_task from tx_timeout") Signed-off-by: Brett Creeley <[email protected]> Co-developed-by: Norbert Zulinski <[email protected]> Signed-off-by: Norbert Zulinski <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-09-08iavf: Fix change VF's mac addressSylwester Dziedziuch1-6/+3
Previously changing mac address gives false negative because ip link set <interface> address <MAC> return with RTNLINK: Permission denied. In iavf_set_mac was check if PF handled our mac set request, even before filter was added to list. Because this check returns always true and it never waits for PF's response. Move iavf_is_mac_handled to wait_event_interruptible_timeout instead of false. Now it will wait for PF's response and then check if address was added or rejected. Fixes: 35a2443d0910 ("iavf: Add waiting for response from PF in set mac") Signed-off-by: Sylwester Dziedziuch <[email protected]> Co-developed-by: Norbert Zulinski <[email protected]> Signed-off-by: Norbert Zulinski <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-09-08ice: Fix crash by keep old cfg when update TCs more than queuesDing Hui1-16/+26
There are problems if allocated queues less than Traffic Classes. Commit a632b2a4c920 ("ice: ethtool: Prohibit improper channel config for DCB") already disallow setting less queues than TCs. Another case is if we first set less queues, and later update more TCs config due to LLDP, ice_vsi_cfg_tc() will failed but left dirty num_txq/rxq and tc_cfg in vsi, that will cause invalid pointer access. [ 95.968089] ice 0000:3b:00.1: More TCs defined than queues/rings allocated. [ 95.968092] ice 0000:3b:00.1: Trying to use more Rx queues (8), than were allocated (1)! [ 95.968093] ice 0000:3b:00.1: Failed to config TC for VSI index: 0 [ 95.969621] general protection fault: 0000 [#1] SMP NOPTI [ 95.969705] CPU: 1 PID: 58405 Comm: lldpad Kdump: loaded Tainted: G U W O --------- -t - 4.18.0 #1 [ 95.969867] Hardware name: O.E.M/BC11SPSCB10, BIOS 8.23 12/30/2021 [ 95.969992] RIP: 0010:devm_kmalloc+0xa/0x60 [ 95.970052] Code: 5c ff ff ff 31 c0 5b 5d 41 5c c3 b8 f4 ff ff ff eb f4 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 89 d1 <8b> 97 60 02 00 00 48 8d 7e 18 48 39 f7 72 3f 55 89 ce 53 48 8b 4c [ 95.970344] RSP: 0018:ffffc9003f553888 EFLAGS: 00010206 [ 95.970425] RAX: dead000000000200 RBX: ffffea003c425b00 RCX: 00000000006080c0 [ 95.970536] RDX: 00000000006080c0 RSI: 0000000000000200 RDI: dead000000000200 [ 95.970648] RBP: dead000000000200 R08: 00000000000463c0 R09: ffff888ffa900000 [ 95.970760] R10: 0000000000000000 R11: 0000000000000002 R12: ffff888ff6b40100 [ 95.970870] R13: ffff888ff6a55018 R14: 0000000000000000 R15: ffff888ff6a55460 [ 95.970981] FS: 00007f51b7d24700(0000) GS:ffff88903ee80000(0000) knlGS:0000000000000000 [ 95.971108] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 95.971197] CR2: 00007fac5410d710 CR3: 0000000f2c1de002 CR4: 00000000007606e0 [ 95.971309] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 95.971419] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 95.971530] PKRU: 55555554 [ 95.971573] Call Trace: [ 95.971622] ice_setup_rx_ring+0x39/0x110 [ice] [ 95.971695] ice_vsi_setup_rx_rings+0x54/0x90 [ice] [ 95.971774] ice_vsi_open+0x25/0x120 [ice] [ 95.971843] ice_open_internal+0xb8/0x1f0 [ice] [ 95.971919] ice_ena_vsi+0x4f/0xd0 [ice] [ 95.971987] ice_dcb_ena_dis_vsi.constprop.5+0x29/0x90 [ice] [ 95.972082] ice_pf_dcb_cfg+0x29a/0x380 [ice] [ 95.972154] ice_dcbnl_setets+0x174/0x1b0 [ice] [ 95.972220] dcbnl_ieee_set+0x89/0x230 [ 95.972279] ? dcbnl_ieee_del+0x150/0x150 [ 95.972341] dcb_doit+0x124/0x1b0 [ 95.972392] rtnetlink_rcv_msg+0x243/0x2f0 [ 95.972457] ? dcb_doit+0x14d/0x1b0 [ 95.972510] ? __kmalloc_node_track_caller+0x1d3/0x280 [ 95.972591] ? rtnl_calcit.isra.31+0x100/0x100 [ 95.972661] netlink_rcv_skb+0xcf/0xf0 [ 95.972720] netlink_unicast+0x16d/0x220 [ 95.972781] netlink_sendmsg+0x2ba/0x3a0 [ 95.975891] sock_sendmsg+0x4c/0x50 [ 95.979032] ___sys_sendmsg+0x2e4/0x300 [ 95.982147] ? kmem_cache_alloc+0x13e/0x190 [ 95.985242] ? __wake_up_common_lock+0x79/0x90 [ 95.988338] ? __check_object_size+0xac/0x1b0 [ 95.991440] ? _copy_to_user+0x22/0x30 [ 95.994539] ? move_addr_to_user+0xbb/0xd0 [ 95.997619] ? __sys_sendmsg+0x53/0x80 [ 96.000664] __sys_sendmsg+0x53/0x80 [ 96.003747] do_syscall_64+0x5b/0x1d0 [ 96.006862] entry_SYSCALL_64_after_hwframe+0x65/0xca Only update num_txq/rxq when passed check, and restore tc_cfg if setup queue map failed. Fixes: a632b2a4c920 ("ice: ethtool: Prohibit improper channel config for DCB") Signed-off-by: Ding Hui <[email protected]> Reviewed-by: Anatolii Gerasymenko <[email protected]> Tested-by: Arpana Arland <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2022-09-08hwmon: (mr75203) enable polling for all VM channelsEliav Farber1-0/+13
Configure ip-polling register to enable polling for all voltage monitor channels. This enables reading the voltage values for all inputs other than just input 0. Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller") Signed-off-by: Eliav Farber <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2022-09-08hwmon: (mr75203) fix multi-channel voltage readingEliav Farber1-12/+17
Fix voltage allocation and reading to support all channels in all VMs. Prior to this change allocation and reading were done only for the first channel in each VM. This change counts the total number of channels for allocation, and takes into account the channel offset when reading the sample data register. Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller") Signed-off-by: Eliav Farber <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2022-09-08hwmon: (mr75203) fix voltage equation for negative source inputEliav Farber1-2/+12
According to Moortec Embedded Voltage Monitor (MEVM) series 3 data sheet, the minimum input signal is -100mv and maximum input signal is +1000mv. The equation used to convert the digital word to voltage uses mixed types (*val signed and n unsigned), and on 64 bit machines also has different size, since sizeof(u32) = 4 and sizeof(long) = 8. So when measuring a negative input, n will be small enough, such that PVT_N_CONST * n < PVT_R_CONST, and the result of (PVT_N_CONST * n - PVT_R_CONST) will overflow to a very big positive 32 bit number. Then when storing the result in *val it will be the same value just in 64 bit (instead of it representing a negative number which will what happen when sizeof(long) = 4). When -1023 <= (PVT_N_CONST * n - PVT_R_CONST) <= -1 dividing the number by 1024 should result of in 0, but because ">> 10" is used, and the sign bit is used to fill the vacated bit positions, it results in -1 (0xf...fffff) which is wrong. This change fixes the sign problem and supports negative values by casting n to long and replacing the shift right with div operation. Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller") Signed-off-by: Eliav Farber <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2022-09-08hwmon: (mr75203) update pvt->v_num and vm_num to the actual number of used ↵Eliav Farber1-0/+2
sensors This issue is relevant when "intel,vm-map" is set in device-tree, and defines a lower number of VMs than actually supported. This change is needed for all places that use pvt->v_num or vm_num later on in the code. Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller") Signed-off-by: Eliav Farber <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2022-09-08hwmon: (mr75203) fix VM sensor allocation when "intel,vm-map" not definedEliav Farber1-8/+6
Bug - in case "intel,vm-map" is missing in device-tree ,'num' is set to 0, and no voltage channel infos are allocated. The reason num is set to 0 when "intel,vm-map" is missing is to set the entire pvt->vm_idx[] with incremental channel numbers, but it didn't take into consideration that same num is used later in devm_kcalloc(). If "intel,vm-map" does exist there is no need to set the unspecified channels with incremental numbers, because the unspecified channels can't be accessed in pvt_read_in() which is the only other place besides the probe functions that uses pvt->vm_idx[]. This change fixes the bug by moving the incremental channel numbers setting to be done only if "intel,vm-map" property is defined (starting loop from 0), and removing 'num = 0'. Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller") Signed-off-by: Eliav Farber <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2022-09-08ice: Don't double unplug aux on peer initiated resetDave Ertman1-2/+0
In the IDC callback that is accessed when the aux drivers request a reset, the function to unplug the aux devices is called. This function is also called in the ice_prepare_for_reset function. This double call is causing a "scheduling while atomic" BUG. [ 662.676430] ice 0000:4c:00.0 rocep76s0: cqp opcode = 0x1 maj_err_code = 0xffff min_err_code = 0x8003 [ 662.676609] ice 0000:4c:00.0 rocep76s0: [Modify QP Cmd Error][op_code=8] status=-29 waiting=1 completion_err=1 maj=0xffff min=0x8003 [ 662.815006] ice 0000:4c:00.0 rocep76s0: ICE OICR event notification: oicr = 0x10000003 [ 662.815014] ice 0000:4c:00.0 rocep76s0: critical PE Error, GLPE_CRITERR=0x00011424 [ 662.815017] ice 0000:4c:00.0 rocep76s0: Requesting a reset [ 662.815475] BUG: scheduling while atomic: swapper/37/0/0x00010002 [ 662.815475] BUG: scheduling while atomic: swapper/37/0/0x00010002 [ 662.815477] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs rfkill 8021q garp mrp stp llc vfat fat rpcrdma intel_rapl_msr intel_rapl_common sunrpc i10nm_edac rdma_ucm nfit ib_srpt libnvdimm ib_isert iscsi_target_mod x86_pkg_temp_thermal intel_powerclamp coretemp target_core_mod snd_hda_intel ib_iser snd_intel_dspcfg libiscsi snd_intel_sdw_acpi scsi_transport_iscsi kvm_intel iTCO_wdt rdma_cm snd_hda_codec kvm iw_cm ipmi_ssif iTCO_vendor_support snd_hda_core irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hwdep snd_seq snd_seq_device rapl snd_pcm snd_timer isst_if_mbox_pci pcspkr isst_if_mmio irdma intel_uncore idxd acpi_ipmi joydev isst_if_common snd mei_me idxd_bus ipmi_si soundcore i2c_i801 mei ipmi_devintf i2c_smbus i2c_ismt ipmi_msghandler acpi_power_meter acpi_pad rv(OE) ib_uverbs ib_cm ib_core xfs libcrc32c ast i2c_algo_bit drm_vram_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm_ttm_helpe r ttm [ 662.815546] nvme nvme_core ice drm crc32c_intel i40e t10_pi wmi pinctrl_emmitsburg dm_mirror dm_region_hash dm_log dm_mod fuse [ 662.815557] Preemption disabled at: [ 662.815558] [<0000000000000000>] 0x0 [ 662.815563] CPU: 37 PID: 0 Comm: swapper/37 Kdump: loaded Tainted: G S OE 5.17.1 #2 [ 662.815566] Hardware name: Intel Corporation D50DNP/D50DNP, BIOS SE5C6301.86B.6624.D18.2111021741 11/02/2021 [ 662.815568] Call Trace: [ 662.815572] <IRQ> [ 662.815574] dump_stack_lvl+0x33/0x42 [ 662.815581] __schedule_bug.cold.147+0x7d/0x8a [ 662.815588] __schedule+0x798/0x990 [ 662.815595] schedule+0x44/0xc0 [ 662.815597] schedule_preempt_disabled+0x14/0x20 [ 662.815600] __mutex_lock.isra.11+0x46c/0x490 [ 662.815603] ? __ibdev_printk+0x76/0xc0 [ib_core] [ 662.815633] device_del+0x37/0x3d0 [ 662.815639] ice_unplug_aux_dev+0x1a/0x40 [ice] [ 662.815674] ice_schedule_reset+0x3c/0xd0 [ice] [ 662.815693] irdma_iidc_event_handler.cold.7+0xb6/0xd3 [irdma] [ 662.815712] ? bitmap_find_next_zero_area_off+0x45/0xa0 [ 662.815719] ice_send_event_to_aux+0x54/0x70 [ice] [ 662.815741] ice_misc_intr+0x21d/0x2d0 [ice] [ 662.815756] __handle_irq_event_percpu+0x4c/0x180 [ 662.815762] handle_irq_event_percpu+0xf/0x40 [ 662.815764] handle_irq_event+0x34/0x60 [ 662.815766] handle_edge_irq+0x9a/0x1c0 [ 662.815770] __common_interrupt+0x62/0x100 [ 662.815774] common_interrupt+0xb4/0xd0 [ 662.815779] </IRQ> [ 662.815780] <TASK> [ 662.815780] asm_common_interrupt+0x1e/0x40 [ 662.815785] RIP: 0010:cpuidle_enter_state+0xd6/0x380 [ 662.815789] Code: 49 89 c4 0f 1f 44 00 00 31 ff e8 65 d7 95 ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 64 02 00 00 31 ff e8 ae c5 9c ff fb 45 85 f6 <0f> 88 12 01 00 00 49 63 d6 4c 2b 24 24 48 8d 04 52 48 8d 04 82 49 [ 662.815791] RSP: 0018:ff2c2c4f18edbe80 EFLAGS: 00000202 [ 662.815793] RAX: ff280805df140000 RBX: 0000000000000002 RCX: 000000000000001f [ 662.815795] RDX: 0000009a52da2d08 RSI: ffffffff93f8240b RDI: ffffffff93f53ee7 [ 662.815796] RBP: ff5e2bd11ff41928 R08: 0000000000000000 R09: 000000000002f8c0 [ 662.815797] R10: 0000010c3f18e2cf R11: 000000000000000f R12: 0000009a52da2d08 [ 662.815798] R13: ffffffff94ad7e20 R14: 0000000000000002 R15: 0000000000000000 [ 662.815801] cpuidle_enter+0x29/0x40 [ 662.815803] do_idle+0x261/0x2b0 [ 662.815807] cpu_startup_entry+0x19/0x20 [ 662.815809] start_secondary+0x114/0x150 [ 662.815813] secondary_startup_64_no_verify+0xd5/0xdb [ 662.815818] </TASK> [ 662.815846] bad: scheduling from the idle thread! [ 662.815849] CPU: 37 PID: 0 Comm: swapper/37 Kdump: loaded Tainted: G S W OE 5.17.1 #2 [ 662.815852] Hardware name: Intel Corporation D50DNP/D50DNP, BIOS SE5C6301.86B.6624.D18.2111021741 11/02/2021 [ 662.815853] Call Trace: [ 662.815855] <IRQ> [ 662.815856] dump_stack_lvl+0x33/0x42 [ 662.815860] dequeue_task_idle+0x20/0x30 [ 662.815863] __schedule+0x1c3/0x990 [ 662.815868] schedule+0x44/0xc0 [ 662.815871] schedule_preempt_disabled+0x14/0x20 [ 662.815873] __mutex_lock.isra.11+0x3a8/0x490 [ 662.815876] ? __ibdev_printk+0x76/0xc0 [ib_core] [ 662.815904] device_del+0x37/0x3d0 [ 662.815909] ice_unplug_aux_dev+0x1a/0x40 [ice] [ 662.815937] ice_schedule_reset+0x3c/0xd0 [ice] [ 662.815961] irdma_iidc_event_handler.cold.7+0xb6/0xd3 [irdma] [ 662.815979] ? bitmap_find_next_zero_area_off+0x45/0xa0 [ 662.815985] ice_send_event_to_aux+0x54/0x70 [ice] [ 662.816011] ice_misc_intr+0x21d/0x2d0 [ice] [ 662.816033] __handle_irq_event_percpu+0x4c/0x180 [ 662.816037] handle_irq_event_percpu+0xf/0x40 [ 662.816039] handle_irq_event+0x34/0x60 [ 662.816042] handle_edge_irq+0x9a/0x1c0 [ 662.816045] __common_interrupt+0x62/0x100 [ 662.816048] common_interrupt+0xb4/0xd0 [ 662.816052] </IRQ> [ 662.816053] <TASK> [ 662.816054] asm_common_interrupt+0x1e/0x40 [ 662.816057] RIP: 0010:cpuidle_enter_state+0xd6/0x380 [ 662.816060] Code: 49 89 c4 0f 1f 44 00 00 31 ff e8 65 d7 95 ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 64 02 00 00 31 ff e8 ae c5 9c ff fb 45 85 f6 <0f> 88 12 01 00 00 49 63 d6 4c 2b 24 24 48 8d 04 52 48 8d 04 82 49 [ 662.816063] RSP: 0018:ff2c2c4f18edbe80 EFLAGS: 00000202 [ 662.816065] RAX: ff280805df140000 RBX: 0000000000000002 RCX: 000000000000001f [ 662.816067] RDX: 0000009a52da2d08 RSI: ffffffff93f8240b RDI: ffffffff93f53ee7 [ 662.816068] RBP: ff5e2bd11ff41928 R08: 0000000000000000 R09: 000000000002f8c0 [ 662.816070] R10: 0000010c3f18e2cf R11: 000000000000000f R12: 0000009a52da2d08 [ 662.816071] R13: ffffffff94ad7e20 R14: 0000000000000002 R15: 0000000000000000 [ 662.816075] cpuidle_enter+0x29/0x40 [ 662.816077] do_idle+0x261/0x2b0 [ 662.816080] cpu_startup_entry+0x19/0x20 [ 662.816083] start_secondary+0x114/0x150 [ 662.816087] secondary_startup_64_no_verify+0xd5/0xdb [ 662.816091] </TASK> [ 662.816169] bad: scheduling from the idle thread! The correct place to unplug the aux devices for a reset is in the prepare_for_reset function, as this is a common place for all reset flows. It also has built in protection from being called twice in a single reset instance before the aux devices are replugged. Fixes: f9f5301e7e2d4 ("ice: Register auxiliary device to provide RDMA") Signed-off-by: Dave Ertman <[email protected]> Tested-by: Helena Anna Dubel <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-09-08Merge tag 'spi-fix-v6.0-rc4' of ↵Linus Torvalds4-9/+41
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "Several fixes that came in since the merge window, the major one being a fix for the spi-mux driver which was broken by the performance optimisations due to it peering inside the core's data structures more than it should" * tag 'spi-fix-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spi: Fix queue hang if previous transfer failed spi: mux: Fix mux interaction with fast path optimisations spi: cadence-quadspi: Disable irqs during indirect reads spi: bitbang: Fix lsb-first Rx
2022-09-08Merge tag 'regulator-fix-v6.0-rc4' of ↵Linus Torvalds2-3/+8
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "One core fix here improving the error handling on enable failure, plus smaller fixes for the pfuze100 drive and the SPMI DT bindings" * tag 'regulator-fix-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Fix qcom,spmi-regulator schema regulator: pfuze100: Fix the global-out-of-bounds access in pfuze100_regulator_probe() regulator: core: Clean up on enable failure
2022-09-08Merge tag 'regmap-fix-v6.0-rc4' of ↵Linus Torvalds1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fix from Mark Brown: "A fix for how we handle controller constraints on SPI message sizes, only impacting systems with SPI controllers with very low limits like the AMD controller used in the Steam Deck" * tag 'regmap-fix-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: spi: Reserve space for register address/padding
2022-09-08drm/panel-edp: Fix delays for Innolux N116BCA-EA1Chen-Yu Tsai1-1/+2
Commit 52824ca4502d ("drm/panel-edp: Better describe eDP panel delays") clarified the various delays used for eDP panels, tying them to the eDP panel timing diagram. For Innolux N116BCA-EA1, .prepare_to_enable would be: t4_min + t5_min + t6_min + max(t7_max, t8_min) Since t4_min and t5_min are both 0, the panel can use either .enable or .prepare_to_enable. As .enable is better defined, switch to using .enable for this panel. Also add .disable = 50, based on the datasheet's t9_min value. This effectively makes the delays the same as delay_200_500_e80_d50. Cc: Douglas Anderson <[email protected]> Fixes: 51d35631c970 ("drm/panel-simple: Add N116BCA-EA1") Signed-off-by: Chen-Yu Tsai <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Signed-off-by: Douglas Anderson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-09-08Merge tag 'scmi-fixes-6.0' of ↵Arnd Bergmann5-8/+54
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Arm SCMI fixes for v6.0 Few fixes addressing possible out of bound access violations by hardening them, incorrect asynchronous resets by restricting them, incorrect SCMI tracing message format by harmonizing them, missing kernel-doc in optee transport, missing SCMI PM driver remove routine by adding it to avoid warning when scmi driver is unloaded and finally improve checks in the info_get operations. * tag 'scmi-fixes-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Harmonize SCMI tracing message format firmware: arm_scmi: Add SCMI PM driver remove routine firmware: arm_scmi: Fix the asynchronous reset requests firmware: arm_scmi: Harden accesses to the reset domains firmware: arm_scmi: Harden accesses to the sensor domains firmware: arm_scmi: Improve checks in the info_get operations firmware: arm_scmi: Fix missing kernel-doc in optee Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2022-09-08Merge tag 'net-6.0-rc5' of ↵Linus Torvalds29-143/+402
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from rxrpc, netfilter, wireless and bluetooth subtrees. Current release - regressions: - skb: export skb drop reaons to user by TRACE_DEFINE_ENUM - bluetooth: fix regression preventing ACL packet transmission Current release - new code bugs: - dsa: microchip: fix kernel oops on ksz8 switches - dsa: qca8k: fix NULL pointer dereference for of_device_get_match_data Previous releases - regressions: - netfilter: clean up hook list when offload flags check fails - wifi: mt76: fix crash in chip reset fail - rxrpc: fix ICMP/ICMP6 error handling - ice: fix DMA mappings leak - i40e: fix kernel crash during module removal Previous releases - always broken: - ipv6: sr: fix out-of-bounds read when setting HMAC data. - tcp: TX zerocopy should not sense pfmemalloc status - sch_sfb: don't assume the skb is still around after enqueueing to child - netfilter: drop dst references before setting - wifi: wilc1000: fix DMA on stack objects - rxrpc: fix an insufficiently large sglist in rxkad_verify_packet_2() - fec: use a spinlock to guard `fep->ptp_clk_on` Misc: - usb: qmi_wwan: add Quectel RM520N" * tag 'net-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits) sch_sfb: Also store skb len before calling child enqueue net: phy: lan87xx: change interrupt src of link_up to comm_ready net/smc: Fix possible access to freed memory in link clear net: ethernet: mtk_eth_soc: check max allowed hash in mtk_ppe_check_skb net: skb: export skb drop reaons to user by TRACE_DEFINE_ENUM net: ethernet: mtk_eth_soc: fix typo in __mtk_foe_entry_clear net: dsa: felix: access QSYS_TAG_CONFIG under tas_lock in vsc9959_sched_speed_set net: dsa: felix: disable cut-through forwarding for frames oversized for tc-taprio net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet net: usb: qmi_wwan: add Quectel RM520N net: dsa: qca8k: fix NULL pointer dereference for of_device_get_match_data tcp: fix early ETIMEDOUT after spurious non-SACK RTO stmmac: intel: Simplify intel_eth_pci_remove() net: mvpp2: debugfs: fix memory leak when using debugfs_lookup() ipv6: sr: fix out-of-bounds read when setting HMAC data. bonding: accept unsolicited NA message bonding: add all node mcast address when slave up bonding: use unspecified address if no available link local address wifi: use struct_group to copy addresses wifi: mac80211_hwsim: check length for virtio packets ...
2022-09-08Merge tag 'efi-urgent-for-v6.0-1' of ↵Linus Torvalds3-25/+14
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI fixes from Ard Biesheuvel: "A couple of low-priority EFI fixes: - prevent the randstruct plugin from re-ordering EFI protocol definitions - fix a use-after-free in the capsule loader - drop unused variable" * tag 'efi-urgent-for-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: capsule-loader: Fix use-after-free in efi_capsule_write efi/x86: libstub: remove unused variable efi: libstub: Disable struct randomization
2022-09-08drm/panfrost: devfreq: set opp to the recommended one to configure regulatorClément Péron1-0/+11
Enabling panfrost GPU OPP with dynamic regulator will make OPP responsible to enable and configure it. Unfortunately OPP configure and enable the regulator when an OPP is asked to be set, which is not the case during panfrost_devfreq_init(). This leave the regulator unconfigured and if no GPU load is triggered, no OPP is asked to be set which make the regulator framework switching it off during regulator_late_cleanup() without noticing and therefore make the board hang as any access to GPU memory space make bus locks up. Call dev_pm_opp_set_opp() with the recommend OPP in panfrost_devfreq_init() to enable the regulator, this will properly configure and enable the regulator and will avoid any switch off by regulator_late_cleanup(). Suggested-by: Viresh Kumar <[email protected]> Signed-off-by: Clément Péron <[email protected]> Reviewed-by: Steven Price <[email protected]> Signed-off-by: Steven Price <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-09-08net: phy: lan87xx: change interrupt src of link_up to comm_readyArun Ramadoss1-4/+54
Currently phy link up/down interrupt is enabled using the LAN87xx_INTERRUPT_MASK register. In the lan87xx_read_status function, phy link is determined using the T1_MODE_STAT_REG register comm_ready bit. comm_ready bit is set using the loc_rcvr_status & rem_rcvr_status. Whenever the phy link is up, LAN87xx_INTERRUPT_SOURCE link_up bit is set first but comm_ready bit takes some time to set based on local and remote receiver status. As per the current implementation, interrupt is triggered using link_up but the comm_ready bit is still cleared in the read_status function. So, link is always down. Initially tested with the shared interrupt mechanism with switch and internal phy which is working, but after implementing interrupt controller it is not working. It can fixed either by updating the read_status function to read from LAN87XX_INTERRUPT_SOURCE register or enable the interrupt mask for comm_ready bit. But the validation team recommends the use of comm_ready for link detection. This patch fixes by enabling the comm_ready bit for link_up in the LAN87XX_INTERRUPT_MASK_2 register (MISC Bank) and link_down in LAN87xx_INTERRUPT_MASK register. Fixes: 8a1b415d70b7 ("net: phy: added ethtool master-slave configuration support") Signed-off-by: Arun Ramadoss <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-09-08drm/ttm: cleanup the resource of ghost objects after locking themChristian König1-5/+5
Otherwise lockdep will complain about cleaning up the bulk_move. Signed-off-by: Christian König <[email protected]> Reviewed-by: Matthew Auld <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Fixes: d91c411c744b ("drm/ttm: update bulk move object of ghost BO")
2022-09-07drm/amdgpu: prevent toc firmware memory leakGuchun Chen1-2/+5
It's missed in psp fini. Signed-off-by: Guchun Chen <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-07drm/amdgpu: correct doorbell range/size value for CSDMA_DOORBELL_RANGEYifan Zhang1-6/+0
current function mixes CSDMA_DOORBELL_RANGE and SDMA0_DOORBELL_RANGE range/size manipulation, while these 2 registers have difference size field mask. Remove range/size manipulation for SDMA0_DOORBELL_RANGE. Signed-off-by: Yifan Zhang <[email protected]> Reviewed-by: Xiaojian Du <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-07drm/amdkfd: print address in hex format rather than decimalYifan Zhang1-1/+1
Addresses should be printed in hex format. Signed-off-by: Yifan Zhang <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-07drm/amd/display: fix memory leak when using debugfs_lookup()Greg Kroah-Hartman1-0/+1
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. Fix this up by properly calling dput(). Cc: Harry Wentland <[email protected]> Cc: Leo Li <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Cc: Alex Deucher <[email protected]> Cc: "Christian König" <[email protected]> Cc: "Pan, Xinhui" <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Wayne Lin <[email protected]> Cc: hersen wu <[email protected]> Cc: Wenjing Liu <[email protected]> Cc: Patrik Jakobsson <[email protected]> Cc: Thelford Williams <[email protected]> Cc: Fangzhi Zuo <[email protected]> Cc: Yongzhi Liu <[email protected]> Cc: Mikita Lipski <[email protected]> Cc: Jiapeng Chong <[email protected]> Cc: Bhanuprakash Modem <[email protected]> Cc: Sean Paul <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-07drm/amd/pm: add missing SetMGpuFanBoostLimitRpm mapping for SMU 13.0.7Evan Quan1-0/+1
Missing SetMGpuFanBoostLimitRpm mapping leads to loading failure for SMU 13.0.7. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-07drm/amd/amdgpu: add rlc_firmware_header_v2_4 to amdgpu_firmware_headerChengming Gui1-0/+1
Add missing structure to avoid incorrect size and version check. Signed-off-by: Chengming Gui <[email protected]> Reviewed-by: Feifei Xu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-07efi: capsule-loader: Fix use-after-free in efi_capsule_writeHyunwoo Kim1-24/+7
A race condition may occur if the user calls close() on another thread during a write() operation on the device node of the efi capsule. This is a race condition that occurs between the efi_capsule_write() and efi_capsule_flush() functions of efi_capsule_fops, which ultimately results in UAF. So, the page freeing process is modified to be done in efi_capsule_release() instead of efi_capsule_flush(). Cc: <[email protected]> # v4.9+ Signed-off-by: Hyunwoo Kim <[email protected]> Link: https://lore.kernel.org/all/20220907102920.GA88602@ubuntu/ Signed-off-by: Ard Biesheuvel <[email protected]>
2022-09-07arch_topology: Make cluster topology span at least SMT CPUsYicong Yang1-1/+1
Currently cpu_clustergroup_mask() will return CPU mask if cluster span more or the same CPUs as cpu_coregroup_mask(). This will result topology borken on non-Cluster SMT machines when building with CONFIG_SCHED_CLUSTER=y. Test with: qemu-system-aarch64 -enable-kvm -machine virt \ -net none \ -cpu host \ -bios ./QEMU_EFI.fd \ -m 2G \ -smp 48,sockets=2,cores=12,threads=2 \ -kernel $Image \ -initrd $Rootfs \ -nographic -append "rdinit=init console=ttyAMA0 sched_verbose loglevel=8" We'll get below error: [ 3.084568] BUG: arch topology borken [ 3.084570] the SMT domain not a subset of the CLS domain Since cluster is a level higher than SMT, fix this by making cluster spans at least SMT CPUs. Fixes: bfcc4397435d ("arch_topology: Limit span of cpu_clustergroup_mask()") Cc: Sudeep Holla <[email protected]> Cc: Vincent Guittot <[email protected]> Cc: Ionela Voinescu <[email protected]> Cc: Greg KH <[email protected]> Reviewed-by: Sudeep Holla <[email protected]> Signed-off-by: Yicong Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-09-07serial: tegra-tcu: Use uart_xmit_advance(), fixes icount.tx accountingIlpo Järvinen1-1/+1
Tx'ing does not correctly account Tx'ed characters into icount.tx. Using uart_xmit_advance() fixes the problem. Fixes: 2d908b38d409 ("serial: Add Tegra Combined UART driver") Cc: <[email protected]> # serial: Create uart_xmit_advance() Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-09-07serial: tegra: Use uart_xmit_advance(), fixes icount.tx accountingIlpo Järvinen1-3/+2
DMA complete & stop paths did not correctly account Tx'ed characters into icount.tx. Using uart_xmit_advance() fixes the problem. Fixes: e9ea096dd225 ("serial: tegra: add serial driver") Cc: <[email protected]> # serial: Create uart_xmit_advance() Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-09-07usb: dwc3: core: leave default DMA if the controller does not support 64-bit DMAWilliam Wu1-6/+7
On some DWC3 controllers (e.g. Rockchip SoCs), the DWC3 core doesn't support 64-bit DMA address width. In this case, this driver should use the default 32-bit mask. Otherwise, the DWC3 controller will break if it runs on above 4GB physical memory environment. This patch reads the DWC_USB3_AWIDTH bits of GHWPARAMS0 which used for the DMA address width, and only configure 64-bit DMA mask if the DWC_USB3_AWIDTH is 64. Fixes: 45d39448b4d0 ("usb: dwc3: support 64 bit DMA in platform driver") Cc: stable <[email protected]> Reviewed-by: Sven Peter <[email protected]> Signed-off-by: William Wu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-09-07net: ethernet: mtk_eth_soc: check max allowed hash in mtk_ppe_check_skbLorenzo Bianconi1-0/+3
Even if max hash configured in hw in mtk_ppe_hash_entry is MTK_PPE_ENTRIES - 1, check theoretical OOB accesses in mtk_ppe_check_skb routine Fixes: c4f033d9e03e9 ("net: ethernet: mtk_eth_soc: rework hardware flow table management") Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-07net: ethernet: mtk_eth_soc: fix typo in __mtk_foe_entry_clearLorenzo Bianconi1-1/+1
Set ib1 state to MTK_FOE_STATE_UNBIND in __mtk_foe_entry_clear routine. Fixes: 33fc42de33278 ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries") Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-07iommu/virtio: Fix interaction with VFIOJean-Philippe Brucker1-0/+11
Commit e8ae0e140c05 ("vfio: Require that devices support DMA cache coherence") requires IOMMU drivers to advertise IOMMU_CAP_CACHE_COHERENCY, in order to be used by VFIO. Since VFIO does not provide to userspace the ability to maintain coherency through cache invalidations, it requires hardware coherency. Advertise the capability in order to restore VFIO support. The meaning of IOMMU_CAP_CACHE_COHERENCY also changed from "IOMMU can enforce cache coherent DMA transactions" to "IOMMU_CACHE is supported". While virtio-iommu cannot enforce coherency (of PCIe no-snoop transactions), it does support IOMMU_CACHE. We can distinguish different cases of non-coherent DMA: (1) When accesses from a hardware endpoint are not coherent. The host would describe such a device using firmware methods ('dma-coherent' in device-tree, '_CCA' in ACPI), since they are also needed without a vIOMMU. In this case mappings are created without IOMMU_CACHE. virtio-iommu doesn't need any additional support. It sends the same requests as for coherent devices. (2) When the physical IOMMU supports non-cacheable mappings. Supporting those would require a new feature in virtio-iommu, new PROBE request property and MAP flags. Device drivers would use a new API to discover this since it depends on the architecture and the physical IOMMU. (3) When the hardware supports PCIe no-snoop. It is possible for assigned PCIe devices to issue no-snoop transactions, and the virtio-iommu specification is lacking any mention of this. Arm platforms don't necessarily support no-snoop, and those that do cannot enforce coherency of no-snoop transactions. Device drivers must be careful about assuming that no-snoop transactions won't end up cached; see commit e02f5c1bb228 ("drm: disable uncached DMA optimization for ARM and arm64"). On x86 platforms, the host may or may not enforce coherency of no-snoop transactions with the physical IOMMU. But according to the above commit, on x86 a driver which assumes that no-snoop DMA is compatible with uncached CPU mappings will also work if the host enforces coherency. Although these issues are not specific to virtio-iommu, it could be used to facilitate discovery and configuration of no-snoop. This would require a new feature bit, PROBE property and ATTACH/MAP flags. Cc: [email protected] Fixes: e8ae0e140c05 ("vfio: Require that devices support DMA cache coherence") Signed-off-by: Jean-Philippe Brucker <[email protected]> Reviewed-by: Robin Murphy <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2022-09-07iommu/vt-d: Fix lockdep splat due to klist iteration in atomic contextLu Baolu1-28/+19
With CONFIG_INTEL_IOMMU_DEBUGFS enabled, below lockdep splat are seen when an I/O fault occurs on a machine with an Intel IOMMU in it. DMAR: DRHD: handling fault status reg 3 DMAR: [DMA Write NO_PASID] Request device [00:1a.0] fault addr 0x0 [fault reason 0x05] PTE Write access is not set DMAR: Dump dmar0 table entries for IOVA 0x0 DMAR: root entry: 0x0000000127f42001 DMAR: context entry: hi 0x0000000000001502, low 0x000000012d8ab001 ================================ WARNING: inconsistent lock state 5.20.0-0.rc0.20220812git7ebfc85e2cd7.10.fc38.x86_64 #1 Not tainted -------------------------------- inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. rngd/1006 [HC1[1]:SC0[0]:HE0:SE1] takes: ff177021416f2d78 (&k->k_lock){?.+.}-{2:2}, at: klist_next+0x1b/0x160 {HARDIRQ-ON-W} state was registered at: lock_acquire+0xce/0x2d0 _raw_spin_lock+0x33/0x80 klist_add_tail+0x46/0x80 bus_add_device+0xee/0x150 device_add+0x39d/0x9a0 add_memory_block+0x108/0x1d0 memory_dev_init+0xe1/0x117 driver_init+0x43/0x4d kernel_init_freeable+0x1c2/0x2cc kernel_init+0x16/0x140 ret_from_fork+0x1f/0x30 irq event stamp: 7812 hardirqs last enabled at (7811): [<ffffffff85000e86>] asm_sysvec_apic_timer_interrupt+0x16/0x20 hardirqs last disabled at (7812): [<ffffffff84f16894>] irqentry_enter+0x54/0x60 softirqs last enabled at (7794): [<ffffffff840ff669>] __irq_exit_rcu+0xf9/0x170 softirqs last disabled at (7787): [<ffffffff840ff669>] __irq_exit_rcu+0xf9/0x170 The klist iterator functions using spin_*lock_irq*() but the klist insertion functions using spin_*lock(), combined with the Intel DMAR IOMMU driver iterating over klists from atomic (hardirq) context, where pci_get_domain_bus_and_slot() calls into bus_find_device() which iterates over klists. As currently there's no plan to fix the klist to make it safe to use in atomic context, this fixes the lockdep splat by avoid calling pci_get_domain_bus_and_slot() in the hardirq context. Fixes: 8ac0b64b9735 ("iommu/vt-d: Use pci_get_domain_bus_and_slot() in pgtable_walk()") Reported-by: Lennert Buytenhek <[email protected]> Link: https://lore.kernel.org/linux-iommu/Yvo2dfpEh%[email protected]/ Link: https://lore.kernel.org/linux-iommu/[email protected]/ Signed-off-by: Lu Baolu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2022-09-07iommu/vt-d: Fix recursive lock issue in iommu_flush_dev_iotlb()Lu Baolu1-16/+23
The per domain spinlock is acquired in iommu_flush_dev_iotlb(), which is possbile to be called in the interrupt context. For example, the drm-intel's CI system got completely blocked with below error: WARNING: inconsistent lock state 6.0.0-rc1-CI_DRM_11990-g6590d43d39b9+ #1 Not tainted -------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/6/0 [HC0[0]:SC1[1]:HE1:SE0] takes: ffff88810440d678 (&domain->lock){+.?.}-{2:2}, at: iommu_flush_dev_iotlb.part.61+0x23/0x80 {SOFTIRQ-ON-W} state was registered at: lock_acquire+0xd3/0x310 _raw_spin_lock+0x2a/0x40 domain_update_iommu_cap+0x20b/0x2c0 intel_iommu_attach_device+0x5bd/0x860 __iommu_attach_device+0x18/0xe0 bus_iommu_probe+0x1f3/0x2d0 bus_set_iommu+0x82/0xd0 intel_iommu_init+0xe45/0x102a pci_iommu_init+0x9/0x31 do_one_initcall+0x53/0x2f0 kernel_init_freeable+0x18f/0x1e1 kernel_init+0x11/0x120 ret_from_fork+0x1f/0x30 irq event stamp: 162354 hardirqs last enabled at (162354): [<ffffffff81b59274>] _raw_spin_unlock_irqrestore+0x54/0x70 hardirqs last disabled at (162353): [<ffffffff81b5901b>] _raw_spin_lock_irqsave+0x4b/0x50 softirqs last enabled at (162338): [<ffffffff81e00323>] __do_softirq+0x323/0x48e softirqs last disabled at (162349): [<ffffffff810c1588>] irq_exit_rcu+0xb8/0xe0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&domain->lock); <Interrupt> lock(&domain->lock); *** DEADLOCK *** 1 lock held by swapper/6/0: This coverts the spin_lock/unlock() into the irq save/restore varieties to fix the recursive locking issues. Fixes: ffd5869d93530 ("iommu/vt-d: Replace spin_lock_irqsave() with spin_lock()") Signed-off-by: Lu Baolu <[email protected]> Acked-by: Lucas De Marchi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2022-09-07iommu/vt-d: Correctly calculate sagaw value of IOMMULu Baolu1-3/+25
The Intel IOMMU driver possibly selects between the first-level and the second-level translation tables for DMA address translation. However, the levels of page-table walks for the 4KB base page size are calculated from the SAGAW field of the capability register, which is only valid for the second-level page table. This causes the IOMMU driver to stop working if the hardware (or the emulated IOMMU) advertises only first-level translation capability and reports the SAGAW field as 0. This solves the above problem by considering both the first level and the second level when calculating the supported page table levels. Fixes: b802d070a52a1 ("iommu/vt-d: Use iova over first level") Cc: [email protected] Signed-off-by: Lu Baolu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2022-09-07iommu/vt-d: Fix kdump kernels boot failure with scalable modeLu Baolu2-59/+50
The translation table copying code for kdump kernels is currently based on the extended root/context entry formats of ECS mode defined in older VT-d v2.5, and doesn't handle the scalable mode formats. This causes the kexec capture kernel boot failure with DMAR faults if the IOMMU was enabled in scalable mode by the previous kernel. The ECS mode has already been deprecated by the VT-d spec since v3.0 and Intel IOMMU driver doesn't support this mode as there's no real hardware implementation. Hence this converts ECS checking in copying table code into scalable mode. The existing copying code consumes a bit in the context entry as a mark of copied entry. It needs to work for the old format as well as for the extended context entries. As it's hard to find such a common bit for both legacy and scalable mode context entries. This replaces it with a per- IOMMU bitmap. Fixes: 7373a8cc38197 ("iommu/vt-d: Setup context and enable RID2PASID support") Cc: [email protected] Reported-by: Jerry Snitselaar <[email protected]> Tested-by: Wen Jin <[email protected]> Signed-off-by: Lu Baolu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2022-09-07net: dsa: felix: access QSYS_TAG_CONFIG under tas_lock in ↵Vladimir Oltean1-2/+2
vsc9959_sched_speed_set The read-modify-write of QSYS_TAG_CONFIG from vsc9959_sched_speed_set() runs unlocked with respect to the other functions that access it, which are vsc9959_tas_guard_bands_update(), vsc9959_qos_port_tas_set() and vsc9959_tas_clock_adjust(). All the others are under ocelot->tas_lock, so move the vsc9959_sched_speed_set() access under that lock as well, to resolve the concurrency. Fixes: 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-07net: dsa: felix: disable cut-through forwarding for frames oversized for ↵Vladimir Oltean1-43/+79
tc-taprio Experimentally, it looks like when QSYS_QMAXSDU_CFG_7 is set to 605, frames even way larger than 601 octets are transmitted even though these should be considered as oversized, according to the documentation, and dropped. Since oversized frame dropping depends on frame size, which is only known at the EOF stage, and therefore not at SOF when cut-through forwarding begins, it means that the switch cannot take QSYS_QMAXSDU_CFG_* into consideration for traffic classes that are cut-through. Since cut-through forwarding has no UAPI to control it, and the driver enables it based on the mantra "if we can, then why not", the strategy is to alter vsc9959_cut_through_fwd() to take into consideration which tc's have oversize frame dropping enabled, and disable cut-through for them. Then, from vsc9959_tas_guard_bands_update(), we re-trigger the cut-through determination process. There are 2 strategies for vsc9959_cut_through_fwd() to determine whether a tc has oversized dropping enabled or not. One is to keep a bit mask of traffic classes per port, and the other is to read back from the hardware registers (a non-zero value of QSYS_QMAXSDU_CFG_* means the feature is enabled). We choose reading back from registers, because struct ocelot_port is shared with drivers (ocelot, seville) that don't support either cut-through nor tc-taprio, and we don't have a felix specific extension of struct ocelot_port. Furthermore, reading registers from the Felix hardware is quite cheap, since they are memory-mapped. Fixes: 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.