aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-09-13drm/amd/display: Relax swizzle checks for video non-RGB formats on DCN314Nicholas Kazlauskas1-3/+1
[Why] HW can support the display swizzle modes for video, and those are preferable over standard or linear for decode use. [How] Remove the check for DCN314. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Hook up DCN314 specific dml implementationNicholas Kazlauskas3-1/+14
[Why & How] Add support for the DML314 functions and hook up DCN314 to use them. This has some necessary additions for calculating Max VSTARTUP for future features, but there's also some changes that we have to make for pixel format/swizzle support. That will come in a following patch to make this transition easier to bisect. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Enable dlg and vba compilation for dcn314Rodrigo Siqueira1-0/+3
We were not using the VBA and DLG files for DCN314, but the next sequence of changes for DCN314 will require those files. This commit adds the necessary files to the Makefile. Cc: Roman Li <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Fix compilation errors on DCN314Rodrigo Siqueira1-4/+5
We have some compilation errors in some DML files from DCN314 that we never noticed because we were not compiling some of the DML files. This commit fixes those syntax errors before we enable the compilation. Cc: Roman Li <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Fix divide by zero in DMLAric Cyr2-18/+16
[why] Incorrectly using MicroTileWidth instead of MacroTileWidth for calculations. [how] Remove all unused references to MicroTile and change them to MacroTile. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Alvin Lee <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Aric Cyr <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Fixing DIG FIFO ErrorLeo Chen1-2/+1
[Why & How] DIG_FIFO_READ_START_LEVEL should only be set to default value (7) by software. Removed all instances of resetting the register to 0 Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Leo Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Update MBLK calculation for SubVPAlvin Lee2-8/+54
[Description] Update MBLK calculation according to hardware doc. For DCC case we were not allocation enough MALL due to an inaccurate MBLK calculation. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Revert "Fallback to SW cursor if SubVP + cursor too big"Aurabindo Pillai1-5/+0
This reverts commit a4f1b04216023ff0f4cd89328b59ee6890248130 since returning false in case of SubVP results in no cursor being visible on desktop as there is no sw cursor fallback path on all platforms. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Alvin Lee <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amdgpu: Skip reset error status for psp v13_0_0Candice Li1-1/+2
No need to reset error status since only umc ras supported on psp v13_0_0. Signed-off-by: Candice Li <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amdgpu: add HDP remap functionality to nbio 7.7Alex Deucher1-0/+9
Was missing before and would have resulted in a write to a non-existant register. Normally APUs don't use HDP, but other asics could use this code and APUs do use the HDP when used in passthrough. Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amdgpu: change the alignment size of TMR BO to 1MYang Wang2-1/+2
align TMR BO size TO tmr size is not necessary, modify the size to 1M to avoid re-create BO fail when serious VRAM fragmentation. v2: add new macro PSP_TMR_ALIGNMENT for TMR BO alignment size Signed-off-by: Yang Wang <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amdgpu: Enable full reset when RAS is supported on gc v11_0_0Candice Li1-0/+1
Enable full reset for RAS supported configuration on gc v11_0_0. v2: simplify the code. Signed-off-by: Candice Li <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amdgpu: use dirty framebuffer helperHamza Mahfooz1-0/+2
Currently, we aren't handling DRM_IOCTL_MODE_DIRTYFB. So, use drm_atomic_helper_dirtyfb() as the dirty callback in the amdgpu_fb_funcs struct. Signed-off-by: Hamza Mahfooz <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amdgpu: Don't enable LTR if not supportedLijo Lazar3-3/+24
As per PCIE Base Spec r4.0 Section 6.18 'Software must not enable LTR in an Endpoint unless the Root Complex and all intermediate Switches indicate support for LTR.' This fixes the Unsupported Request error reported through AER during ASPM enablement. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216455 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Reported-by: Gustaw Smolarczyk <[email protected]> Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/pm: disable BACO entry/exit completely on several sienna cichlid cardsGuchun Chen1-0/+11
To avoid hardware intermittent failures. Signed-off-by: Guchun Chen <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13gpio: ixp4xx: Make irqchip immutableLinus Walleij1-3/+14
This turns the IXP4xx GPIO irqchip into an immutable irqchip, a bit different from the standard template due to being hierarchical. Tested on the IXP4xx which uses drivers/ata/pata_ixp4xx_cf.c for a rootfs on compact flash with IRQs from this GPIO block to the CF ATA controller. Cc: Marc Zyngier <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Acked-by: Marc Zyngier <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
2022-09-13USB: serial: option: add Quectel RM520Njerry meng1-0/+4
add support for Quectel RM520N which is based on Qualcomm SDX62 chip. 0x0801: DIAG + NMEA + AT + MODEM + RMNET T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0801 Rev= 5.04 S: Manufacturer=Quectel S: Product=RM520N-GL S: SerialNumber=384af524 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: jerry meng <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2022-09-13USB: serial: option: add Quectel BG95 0x0203 compositionCarl Yin(殷张成)1-0/+2
Add support for the following Quectel BG95 composition: 0x0203: Diag + GNSS + Modem + ECM usb-devices output: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0203 Rev= 0.00 S: Manufacturer=Quectel, Incorporated S: Product=Quectel LPWA Module S: SerialNumber=71d3a21b C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms I: If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Carl Yin <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2022-09-13net: phy: aquantia: wait for the suspend/resume operations to finishIoana Ciornei1-4/+49
The Aquantia datasheet notes that after issuing a Processor-Intensive MDIO operation, like changing the low-power state of the device, the driver should wait for the operation to finish before issuing a new MDIO command. The new aqr107_wait_processor_intensive_op() function is added which can be used after these kind of MDIO operations. At the moment, we are only adding it at the end of the suspend/resume calls. The issue was identified on a board featuring the AQR113C PHY, on which commands like 'ip link (..) up / down' issued without any delays between them would render the link on the PHY to remain down. The issue was easy to reproduce with a one-liner: $ ip link set dev ethX down; ip link set dev ethX up; \ ip link set dev ethX down; ip link set dev ethX up; Fixes: ac9e81c230eb ("net: phy: aquantia: add suspend / resume callbacks for AQR107 family") Signed-off-by: Ioana Ciornei <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-09-13parisc: ccio-dma: Add missing iounmap in error path in ccio_probe()Yang Yingliang1-0/+1
Add missing iounmap() before return from ccio_probe(), if ccio_init_resources() fails. Fixes: d46c742f827f ("parisc: ccio-dma: Handle kmalloc failure in ccio_init_resources()") Signed-off-by: Yang Yingliang <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2022-09-13drm/mediatek: Fix wrong dither settingsAllen-KH Cheng1-1/+1
The width and height arguments in the cmdq packet for mtk_dither_config() are inverted. We fix the incorrect width and height for dither settings in mtk_dither_config(). Fixes: 73d3724745db ("drm/mediatek: Adjust to the alphabetic order for mediatek-drm") Co-developed-by: Yongqiang Niu <[email protected]> Signed-off-by: Yongqiang Niu <[email protected]> Signed-off-by: Allen-KH Cheng <[email protected]> Reviewed-by: Matthias Brugger <[email protected]> Link: https://patchwork.kernel.org/project/linux-mediatek/patch/[email protected]/ Signed-off-by: Chun-Kuang Hu <[email protected]>
2022-09-12Merge tag 'hyperv-fixes-signed-20220912' of ↵Linus Torvalds5-30/+46
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - Fix an error handling issue in DRM driver (Christophe JAILLET) - Fix some issues in framebuffer driver (Vitaly Kuznetsov) - Two typo fixes (Jason Wang, Shaomin Deng) - Drop unnecessary casting in kvp tool (Zhou Jie) * tag 'hyperv-fixes-signed-20220912' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Drivers: hv: Never allocate anything besides framebuffer from framebuffer memory region Drivers: hv: Always reserve framebuffer region for Gen1 VMs PCI: Move PCI_VENDOR_ID_MICROSOFT/PCI_DEVICE_ID_HYPERV_VIDEO definitions to pci_ids.h tools: hv: kvp: remove unnecessary (void*) conversions Drivers: hv: remove duplicate word in a comment tools: hv: Remove an extraneous "the" drm/hyperv: Fix an error handling path in hyperv_vmbus_probe()
2022-09-12irqchip: Select downstream irqchip drivers for LoongArch CPUHuacai Chen1-0/+5
LoongArch irqchips have a fixed hierarchy which currently can't be described by ACPI tables, so upstream irqchip drivers call downstream irqchip drivers' initialization directly. As a result, the top level (CPU-level) irqchip driver should explicitly select downstream drivers to avoid build errors. Reported-by: kernel test robot <[email protected]> Signed-off-by: Huacai Chen <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-09-12irqchip/gic-v3-its: Remove cpumask_var_t allocationPierre Gondois1-6/+8
Running a PREEMPT_RT kernel based on v5.19-rc3-rt4 on an Ampere Altra triggers: [ 22.616229] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 [ 22.616239] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 1884, name: kworker/80:1 [ 22.616243] preempt_count: 3, expected: 0 [ 22.616244] RCU nest depth: 0, expected: 0 [...] [ 22.616250] hardirqs last enabled at (33): _raw_spin_unlock_irq (/home/piegon01/linux/./arch/arm64/include/asm/irqflags.h:35) [ 22.616273] hardirqs last disabled at (34): __schedule (/home/piegon01/linux/kernel/sched/core.c:6432 (discriminator 1)) [ 22.616283] softirqs last enabled at (0): copy_process (/home/piegon01/linux/./include/linux/lockdep.h:191) [ 22.616297] softirqs last disabled at (0): 0x0 [ 22.616305] Preemption disabled at: [ 22.616307] __setup_irq (/home/piegon01/linux/kernel/irq/manage.c:1612) [ 22.616322] CPU: 80 PID: 1884 Comm: kworker/80:1 Tainted: G W [...] [ 22.616328] Hardware name: WIWYNN Mt.Jade Server System B81.03001.0005/Mt.Jade Motherboard, BIOS 1.08.20220218 (SCP: 1.08.20220218) 2022/02/18 [ 22.616333] Workqueue: events work_for_cpu_fn [ 22.616344] Call trace: [...] [ 22.616403] alloc_cpumask_var_node (/home/piegon01/linux/lib/cpumask.c:115) [ 22.616414] alloc_cpumask_var (/home/piegon01/linux/lib/cpumask.c:147) [ 22.616417] its_select_cpu (/home/piegon01/linux/drivers/irqchip/irq-gic-v3-its.c:1580) [ 22.616428] its_set_affinity (/home/piegon01/linux/drivers/irqchip/irq-gic-v3-its.c:1659) [ 22.616431] msi_domain_set_affinity (/home/piegon01/linux/kernel/irq/msi.c:501) [ 22.616440] irq_do_set_affinity (/home/piegon01/linux/kernel/irq/manage.c:276) [ 22.616443] irq_setup_affinity (/home/piegon01/linux/kernel/irq/manage.c:633) [ 22.616447] irq_startup (/home/piegon01/linux/kernel/irq/chip.c:280) [ 22.616453] __setup_irq (/home/piegon01/linux/kernel/irq/manage.c:1777) Follow the pattern established in commit cba4235e6031e ("genirq: Remove mask argument from setup_affinity()") and co to overcome this issue by defining a static struct cpumask and protecting it by a raw spinlock. Since its_select_cpu() can be executed with IRQs enabled or disabled, enforce that the cpumask computation is done with interrupts disabled. Signed-off-by: Pierre Gondois <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-09-12irqchip/stm32-exti: Remove check on always false conditionAntonio Borneo1-1/+1
The field drv_data is assigned during driver's probe, where it's already checked to be not NULL. Remove the always false check '!host_data->drv_data'. This fixes a warning "variable dereferenced before check" detected by '0-DAY CI Kernel Test Service'. Fixes: c297493336b7 ("irqchip/stm32-exti: Simplify irq description table") Reported-by: kernel test robot <[email protected]> Reported-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/lkml/[email protected]/ Signed-off-by: Antonio Borneo <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-09-12Revert "drm/i915/display: Re-add check for low voltage sku for max dp source ↵Ville Syrjälä1-29/+3
rate" This reverts commit d5929835080a60f9119d024fa42f315913942f76. With the Parade PS8461E MUX workaround (WaEdpLinkRateDataReload) implemented we can get finally rid of the is_low_voltage_sku() check that incorrectly prevents many machines from using the 8.1Gpbs link rate. Cc: Jason A. Donenfeld <[email protected]> Cc: Ankit Nautiyal <[email protected]> Cc: Jani Nikula <[email protected]> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5272 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6323 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6205 Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Tested-by: Aaron Ma <[email protected]> Tested-by: Jason A. Donenfeld <[email protected]> Reviewed-by: Jani Nikula <[email protected]> (cherry picked from commit 483e3d87a37e804588ac8224aadd20a84593cafd) Signed-off-by: Rodrigo Vivi <[email protected]>
2022-09-12drm/i915/gt: Fix perf limit reasons bit positionsAshutosh Dixit1-8/+8
Perf limit reasons bit positions were off by one. Fixes: fa68bff7cf27 ("drm/i915/gt: Add sysfs throttle frequency interfaces") Cc: [email protected] # v5.18+ Signed-off-by: Ashutosh Dixit <[email protected]> Acked-by: Andi Shyti <[email protected]> Reviewed-by: Sujaritha Sundaresan <[email protected]> Signed-off-by: Matt Roper <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Joonas Lahtinen <[email protected]> (cherry picked from commit 60017f34fc334d1bb25476b0b0996b4073e76c90) Signed-off-by: Rodrigo Vivi <[email protected]>
2022-09-12drm/i915/guc: Cancel GuC engine busyness worker synchronouslyUmesh Nerlige Ramappa1-1/+6
The worker is canceled in gt_park path, but earlier it was assumed that gt_park path cannot sleep and the cancel is asynchronous. This caused a race with suspend flow where the worker runs after suspend and causes an unclaimed register access warning. Cancel the worker synchronously since the gt_park is indeed allowed to sleep. v2: Fix author name and sign-off mismatch Signed-off-by: Umesh Nerlige Ramappa <[email protected]> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4419 Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu") Reviewed-by: Ashutosh Dixit <[email protected]> Signed-off-by: John Harrison <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Joonas Lahtinen <[email protected]> (cherry picked from commit 31335aa8e08be3fe10c50aecd2f11aba77544a78) Signed-off-by: Rodrigo Vivi <[email protected]>
2022-09-12drm/i915: Set correct domains values at _i915_vma_move_to_activeNirmoy Das1-1/+2
Fix regression introduced by commit: "drm/i915: Individualize fences before adding to dma_resv obj" which sets obj->read_domains to 0 for both read and write paths. Also set obj->write_domain to 0 on read path which was removed by the commit. References: https://gitlab.freedesktop.org/drm/intel/-/issues/6639 Fixes: 420a07b841d0 ("drm/i915: Individualize fences before adding to dma_resv obj") Signed-off-by: Nirmoy Das <[email protected]> Cc: <[email protected]> # v5.16+ Cc: Matthew Auld <[email protected]> Cc: Andrzej Hajda <[email protected]> Reviewed-by: Andrzej Hajda <[email protected]> Signed-off-by: Matthew Auld <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 04f7eb3d4582a0a4da67c86e55fda7de2df86d91) Signed-off-by: Rodrigo Vivi <[email protected]>
2022-09-12drm/i915/vdsc: Set VDSC PIC_HEIGHT before using for DP DSCAnkit Nautiyal3-1/+3
Currently, pic_height of vdsc_cfg structure is being used to calculate slice_height, before it is set for DP. So taking out the lines to set pic_height from the helper intel_dp_dsc_compute_params() to individual encoders, and setting pic_height, before it is used to calculate slice_height for DP. Fixes: 5a6d866f8e1b ("drm/i915: Get slice height before computing rc params") Cc: Manasi Navare <[email protected]> Cc: Vandita Kulkarni <[email protected]> Cc: Matt Roper <[email protected]> Signed-off-by: Ankit Nautiyal <[email protected]> Reviewed-by: Vandita Kulkarni <[email protected]> Signed-off-by: Matt Roper <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit e72df53dcb01ec58e0410da353551adf94c8d0f1) Signed-off-by: Rodrigo Vivi <[email protected]>
2022-09-12wifi: mt76: fix 5 GHz connection regression on mt76x0/mt76x2Felix Fietkau1-1/+2
Some users have reported being unable to connect to MT76x0 APs running mt76 after a commit enabling the VHT extneded NSS BW feature. Fix this regression by ensuring that this feature only gets enabled on drivers that support it Cc: [email protected] Fixes: d9fcfc1424aa ("mt76: enable the VHT extended NSS BW feature") Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-09-12wifi: mt76: fix reading current per-tid starting sequence number for aggregationFelix Fietkau1-1/+1
The code was accidentally shifting register values down by tid % 32 instead of (tid * field_size) % 32. Cc: [email protected] Fixes: a28bef561a5c ("mt76: mt7615: re-enable offloading of sequence number assignment") Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-09-12wifi: iwlwifi: Mark IWLMEI as brokenToke Høiland-Jørgensen1-0/+1
The iwlmei driver breaks iwlwifi when returning from suspend. The interface ends up in the 'down' state after coming back from suspend. And iwd doesn't touch the interface state, but wpa_supplicant does, so the bug only happens on iwd. The bug report[0] has been open for four months now, and no fix seems to be forthcoming. Since just disabling the iwlmei driver works as a workaround, let's mark the config option as broken until it can be fixed properly. [0] https://bugzilla.kernel.org/show_bug.cgi?id=215937 Fixes: 2da4366f9e2c ("iwlwifi: mei: add the driver to allow cooperation with CSME") Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Acked-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-09-11Merge tag 'iommu-fixes-v6.0-rc4' of ↵Linus Torvalds7-134/+160
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - Intel VT-d fixes from Lu Baolu: - Boot kdump kernels with VT-d scalable mode on - Calculate the right page table levels - Fix two recursive locking issues - Fix a lockdep splat issue - AMD IOMMU fixes: - Fix for completion-wait command to use full 64 bits of data - Fix PASID related issue where GPU sound devices failed to initialize - Fix for Virtio-IOMMU to report correct caching behavior, needed for use with VFIO * tag 'iommu-fixes-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu: Fix false ownership failure on AMD systems with PASID activated iommu/vt-d: Fix possible recursive locking in intel_iommu_init() iommu/virtio: Fix interaction with VFIO iommu/vt-d: Fix lockdep splat due to klist iteration in atomic context iommu/vt-d: Fix recursive lock issue in iommu_flush_dev_iotlb() iommu/vt-d: Correctly calculate sagaw value of IOMMU iommu/vt-d: Fix kdump kernels boot failure with scalable mode iommu/amd: use full 64-bit value in build_completion_wait()
2022-09-11iommu: Fix false ownership failure on AMD systems with PASID activatedJason Gunthorpe2-2/+21
The AMD IOMMU driver cannot activate PASID mode on a RID without the RID's translation being set to IDENTITY. Further it requires changing the RID's page table layout from the normal v1 IOMMU_DOMAIN_IDENTITY layout to a different v2 layout. It does this by creating a new iommu_domain, configuring that domain for v2 identity operation and then attaching it to the group, from within the driver. This logic assumes the group is already set to the IDENTITY domain and is being used by the DMA API. However, since the ownership logic is based on the group's domain pointer equaling the default domain to detect DMA API ownership, this causes it to look like the group is not attached to the DMA API any more. This blocks attaching drivers to any other devices in the group. In a real system this manifests itself as the HD-audio devices on some AMD platforms losing their device drivers. Work around this unique behavior of the AMD driver by checking for equality of IDENTITY domains based on their type, not their pointer value. This allows the AMD driver to have two IDENTITY domains for internal purposes without breaking the check. Have the AMD driver properly declare that the special domain it created is actually an IDENTITY domain. Cc: Robin Murphy <[email protected]> Cc: [email protected] Fixes: 512881eacfa7 ("bus: platform,amba,fsl-mc,PCI: Add device DMA ownership management") Reported-by: Takashi Iwai <[email protected]> Tested-by: Takashi Iwai <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Reviewed-by: Robin Murphy <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2022-09-11iommu/vt-d: Fix possible recursive locking in intel_iommu_init()Lu Baolu2-25/+9
The global rwsem dmar_global_lock was introduced by commit 3a5670e8ac932 ("iommu/vt-d: Introduce a rwsem to protect global data structures"). It is used to protect DMAR related global data from DMAR hotplug operations. The dmar_global_lock used in the intel_iommu_init() might cause recursive locking issue, for example, intel_iommu_get_resv_regions() is taking the dmar_global_lock from within a section where intel_iommu_init() already holds it via probe_acpi_namespace_devices(). Using dmar_global_lock in intel_iommu_init() could be relaxed since it is unlikely that any IO board must be hot added before the IOMMU subsystem is initialized. This eliminates the possible recursive locking issue by moving down DMAR hotplug support after the IOMMU is initialized and removing the uses of dmar_global_lock in intel_iommu_init(). Fixes: d5692d4af08cd ("iommu/vt-d: Fix suspicious RCU usage in probe_acpi_namespace_devices()") Reported-by: Robin Murphy <[email protected]> Signed-off-by: Lu Baolu <[email protected]> Reviewed-by: Kevin Tian <[email protected]> Link: https://lore.kernel.org/r/894db0ccae854b35c73814485569b634237b5538.1657034828.git.robin.murphy@arm.com Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2022-09-10Merge tag 'hwmon-for-v6.0-rc5' of ↵Linus Torvalds3-212/+278
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Fix severe regression in asus-ec-sensors driver which resulted in EC driver failures - Fix various bugs in mr75203 driver - Fix byte order bug in tps23861 driver * tag 'hwmon-for-v6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (asus-ec-sensors) autoload module via DMI data hwmon: (mr75203) enable polling for all VM channels hwmon: (mr75203) fix multi-channel voltage reading hwmon: (mr75203) fix voltage equation for negative source input hwmon: (mr75203) update pvt->v_num and vm_num to the actual number of used sensors hwmon: (mr75203) fix VM sensor allocation when "intel,vm-map" not defined dt-bindings: hwmon: (mr75203) fix "intel,vm-map" property to be optional hwmon: (tps23861) fix byte order in resistance register
2022-09-09Merge tag 'scsi-fixes' of ↵Linus Torvalds9-51/+45
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Eight patches which looks like quite a large core change, but most of the diffstat is reverting the attempt to rejig reference counting introduced in the last merge window which caused issues with device and module removal. Of the remaining four patches, only the fix use-after-free is substantial" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mpt3sas: Fix use-after-free warning scsi: core: Fix a use-after-free scsi: core: Revert "Make sure that targets outlive devices" scsi: core: Revert "Make sure that hosts outlive targets" scsi: core: Revert "Simplify LLD module reference counting" scsi: core: Revert "Call blk_mq_free_tag_set() earlier" scsi: lpfc: Add missing destroy_workqueue() in error path scsi: lpfc: Return DID_TRANSPORT_DISRUPTED instead of DID_REQUEUE
2022-09-09Merge tag 'driver-core-6.0-rc5' of ↵Linus Torvalds2-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are some small driver core and debugfs fixes for 6.0-rc5. Included in here are: - multiple attempts to get the arch_topology code to work properly on non-cluster SMT systems. First attempt caused build breakages in linux-next and 0-day, second try worked. - debugfs fixes for a long-suffering memory leak. The pattern of debugfs_remove(debugfs_lookup(...)) turns out to leak dentries, so add debugfs_lookup_and_remove() to fix this problem. Also fix up the scheduler debug code that highlighted this problem. Fixes for other subsystems will be trickling in over the next few months for this same issue once the debugfs function is merged. All of these have been in linux-next since Wednesday with no reported problems" * tag 'driver-core-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: arch_topology: Make cluster topology span at least SMT CPUs sched/debug: fix dentry leak in update_sched_domain_debugfs debugfs: add debugfs_lookup_and_remove() driver core: fix driver_set_override() issue with empty strings Revert "arch_topology: Make cluster topology span at least SMT CPUs" arch_topology: Make cluster topology span at least SMT CPUs
2022-09-09Merge tag 'block-6.0-2022-09-09' of git://git.kernel.dk/linux-blockLinus Torvalds4-12/+32
Pull block fixes from Jens Axboe: - NVMe pull via Christoph: - fix a use after free in nvmet (Bart Van Assche) - fix a use after free when detecting digest errors (Sagi Grimberg) - fix regression that causes sporadic TCP requests to time out (Sagi Grimberg) - fix two off by ones errors in the nvmet ZNS support (Dennis Maisenbacher) - requeue aen after firmware activation (Keith Busch) - Fix missing request flags in debugfs code (me) - Partition scan fix (Ming) * tag 'block-6.0-2022-09-09' of git://git.kernel.dk/linux-block: block: add missing request flags to debugfs code nvme: requeue aen after firmware activation nvmet: fix mar and mor off-by-one errors nvme-tcp: fix regression that causes sporadic requests to time out nvme-tcp: fix UAF when detecting digest errors nvmet: fix a use-after-free block: don't add partitions if GD_SUPPRESS_PART_SCAN is set
2022-09-09Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds19-44/+93
Pull rdma fixes from Jason Gunthorpe: "Many bug fixes in several drivers: - Fix misuse of the DMA API in rtrs - Several irdma issues: hung task due to SQ flushing, incorrect capability reporting to userspace, improper error handling for MW corners, touching an uninitialized SGL for during invalidation. - hns was using the wrong page size limits for the HW, an incorrect calculation of wqe_shift causing WQE corruption, and mis computed a timer id. - Fix a crash in SRP triggered by blktests - Fix compiler errors by calling virt_to_page() with the proper type in siw - Userspace triggerable deadlock in ODP - mlx5 could use the wrong profile due to some driver loading races, counters were not working in some device configurations, and a crash on error unwind" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/irdma: Report RNR NAK generation in device caps RDMA/irdma: Use s/g array in post send only when its valid RDMA/irdma: Return correct WC error for bind operation failure RDMA/irdma: Return error on MR deregister CQP failure RDMA/irdma: Report the correct max cqes from query device MAINTAINERS: Update maintainers of HiSilicon RoCE RDMA/mlx5: Fix UMR cleanup on error flow of driver init RDMA/mlx5: Set local port to one when accessing counters RDMA/mlx5: Rely on RoCE fw cap instead of devlink when setting profile IB/core: Fix a nested dead lock as part of ODP flow RDMA/siw: Pass a pointer to virt_to_page() RDMA/srp: Set scmnd->result only when scmnd is not NULL RDMA/hns: Remove the num_qpc_timer variable RDMA/hns: Fix wrong fixed value of qp->rq.wqe_shift RDMA/hns: Fix supported page size RDMA/cma: Fix arguments order in net device validation RDMA/irdma: Fix drain SQ hang with no completion RDMA/rtrs-srv: Pass the correct number of entries for dma mapped SGL RDMA/rtrs-clt: Use the right sg_cnt after ib_dma_map_sg
2022-09-09Merge tag 'drm-fixes-2022-09-10' of git://anongit.freedesktop.org/drm/drmLinus Torvalds17-33/+142
Pull drm fixes from Dave Airlie: "From a train in the Irish countryside, regular drm fixes for 6.0-rc5. This is mostly amdgpu/amdkfd and i915 fixes, then one panfrost, one ttm and one edid fix. Nothing too major going on. Hopefully a quiet week next week for LPC. edid: - Fix EDID 1.4 range-descriptor parsing ttm: - Fix ghost-object bulk moves i915: - Fix MIPI sequence block copy from BIOS' table - Fix PCODE min freq setup when GuC's SLPC is in use - Implement Workaround for eDP - Fix has_flat_ccs selection for DG1 amdgpu: - Firmware header fix - SMU 13.x fix - Debugfs memory leak fix - NBIO 7.7 fix - Firmware memory leak fix amdkfd: - Debug output fix panfrost: - Fix devfreq OPP" * tag 'drm-fixes-2022-09-10' of git://anongit.freedesktop.org/drm/drm: drm/panfrost: devfreq: set opp to the recommended one to configure regulator drm/ttm: cleanup the resource of ghost objects after locking them drm/amdgpu: prevent toc firmware memory leak drm/amdgpu: correct doorbell range/size value for CSDMA_DOORBELL_RANGE drm/amdkfd: print address in hex format rather than decimal drm/amd/display: fix memory leak when using debugfs_lookup() drm/amd/pm: add missing SetMGpuFanBoostLimitRpm mapping for SMU 13.0.7 drm/amd/amdgpu: add rlc_firmware_header_v2_4 to amdgpu_firmware_header drm/i915: consider HAS_FLAT_CCS() in needs_ccs_pages drm/i915: Implement WaEdpLinkRateDataReload drm/i915/slpc: Let's fix the PCODE min freq table setup for SLPC drm/i915/bios: Copy the whole MIPI sequence block drm/ttm: update bulk move object of ghost BO drm/edid: Handle EDID 1.4 range descriptor h/vfreq offsets
2022-09-09Merge tag 'linux-kselftest-kunit-fixes-6.0-rc5' of ↵Linus Torvalds2-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit fixes from Shuah Khan: "Two fixes to test build and a fix for incorrect taint reason reporting" * tag 'linux-kselftest-kunit-fixes-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: tools: Add new "test" taint to kernel-chktaint kunit: fix Kconfig for build-in tests USB4 and Nitro Enclaves kunit: fix assert_type for comparison macros
2022-09-09Merge tag 'riscv-for-linus-6.0-rc5' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - A pair of device tree fixes for the Polarfire SOC - A fix to avoid overflowing the PMU counter array when firmware incorrectly reports the number of supported counters, which manifests on OpenSBI versions prior to 1.1 * tag 'riscv-for-linus-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: perf: RISC-V: fix access beyond allocated array riscv: dts: microchip: use an mpfs specific l2 compatible dt-bindings: riscv: sifive-l2: add a PolarFire SoC compatible
2022-09-09hwmon: (asus-ec-sensors) autoload module via DMI dataEugene Shalygin1-186/+222
Replace autoloading data based on the ACPI EC device with the DMI records for motherboards models. The ACPI method created a bug that when this driver returns error from the probe function because of the unsupported motherboard model, the ACPI subsystem concludes that the EC device does not work properly. Fixes: 5cd29012028d ("hwmon: (asus-ec-sensors) introduce ec_board_info struct for board data") Bug: https://bugzilla.kernel.org/show_bug.cgi?id=216412 Bug: https://bugzilla.redhat.com/show_bug.cgi?id=2121844 Signed-off-by: Eugene Shalygin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Guenter Roeck <[email protected]>
2022-09-10Merge tag 'drm-intel-fixes-2022-09-08' of ↵Dave Airlie7-11/+94
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix MIPI sequence block copy from BIOS' table. (Ville) - Fix PCODE min freq setup when GuC's SLPC is in use. (Rodrigo) - Implement Workaround for eDP. (Ville) - Fix has_flat_ccs selection for DG1. (Matt) Signed-off-by: Dave Airlie <[email protected]> From: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-09-10Merge tag 'drm-misc-fixes-2022-09-08' of ↵Dave Airlie4-13/+39
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull: * edid: Fix EDID 1.4 range-descriptor parsing * panfrost: Fix devfreq OPP * ttm: Fix ghost-object bulk moves Signed-off-by: Dave Airlie <[email protected]> From: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/YxniKN4rK4qPp+J9@linux-uq9g
2022-09-09drm/rockchip: vop2: Fix eDP/HDMI sync polaritiesSascha Hauer1-0/+4
The hsync/vsync polarities were not honoured for the eDP and HDMI ports. Add the register settings to configure the polarities as requested by the DRM_MODE_FLAG_PHSYNC/DRM_MODE_FLAG_PVSYNC flags. Signed-off-by: Sascha Hauer <[email protected]> Fixes: 604be85547ce ("drm/rockchip: Add VOP2 driver") Tested-by: Michael Riesch <[email protected]> Signed-off-by: Heiko Stuebner <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-09-09drm/gma500: Fix (vblank) IRQs not working after suspend/resumeHans de Goede7-23/+18
Fix gnome-shell (and other page-flip users) hanging after suspend/resume because of the gma500's IRQs not working. This fixes 2 problems with the IRQ handling: 1. gma_power_off() calls gma_irq_uninstall() which does a free_irq(), but gma_power_on() called gma_irq_preinstall() + gma_irq_postinstall() which do not call request_irq. Replace the pre- + post-install calls with gma_irq_install() which does prep + request + post. 2. After fixing 1. IRQs still do not work on a Packard Bell Dot SC (Intel Atom N2600, cedarview) netbook. Cederview uses MSI interrupts and it seems that the BIOS re-configures things back to normal APIC based interrupts during S3 suspend. There is some MSI PCI-config registers save/restore code which tries to deal with this, but on the Packard Bell Dot SC this is not sufficient to restore MSI IRQ functionality after a suspend/resume. Replace the PCI-config registers save/restore with pci_disable_msi() on suspend + pci_enable_msi() on resume. Fixing e.g. gnome-shell hanging. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Patrik Jakobsson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-09-09drm/gma500: Fix WARN_ON(lock->magic != lock) errorHans de Goede1-2/+2
psb_gem_unpin() calls dma_resv_lock() but the underlying ww_mutex gets destroyed by drm_gem_object_release() move the drm_gem_object_release() call in psb_gem_free_object() to after the unpin to fix the below warning: [ 79.693962] ------------[ cut here ]------------ [ 79.693992] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 79.694015] WARNING: CPU: 0 PID: 240 at kernel/locking/mutex.c:582 __ww_mutex_lock.constprop.0+0x569/0xfb0 [ 79.694052] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer qrtr bnep ath9k ath9k_common ath9k_hw snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel ath3k snd_intel_dspcfg mac80211 snd_intel_sdw_acpi btusb snd_hda_codec btrtl btbcm btintel btmtk bluetooth at24 snd_hda_core snd_hwdep uvcvideo snd_seq libarc4 videobuf2_vmalloc ath videobuf2_memops videobuf2_v4l2 videobuf2_common snd_seq_device videodev acer_wmi intel_powerclamp coretemp mc snd_pcm joydev sparse_keymap ecdh_generic pcspkr wmi_bmof cfg80211 i2c_i801 i2c_smbus snd_timer snd r8169 rfkill lpc_ich soundcore acpi_cpufreq zram rtsx_pci_sdmmc mmc_core serio_raw rtsx_pci gma500_gfx(E) video wmi ip6_tables ip_tables i2c_dev fuse [ 79.694436] CPU: 0 PID: 240 Comm: plymouthd Tainted: G W E 6.0.0-rc3+ #490 [ 79.694457] Hardware name: Packard Bell dot s/SJE01_CT, BIOS V1.10 07/23/2013 [ 79.694469] RIP: 0010:__ww_mutex_lock.constprop.0+0x569/0xfb0 [ 79.694496] Code: ff 85 c0 0f 84 15 fb ff ff 8b 05 ca 3c 11 01 85 c0 0f 85 07 fb ff ff 48 c7 c6 30 cb 84 aa 48 c7 c7 a3 e1 82 aa e8 ac 29 f8 ff <0f> 0b e9 ed fa ff ff e8 5b 83 8a ff 85 c0 74 10 44 8b 0d 98 3c 11 [ 79.694513] RSP: 0018:ffffad1dc048bbe0 EFLAGS: 00010282 [ 79.694623] RAX: 0000000000000028 RBX: 0000000000000000 RCX: 0000000000000000 [ 79.694636] RDX: 0000000000000001 RSI: ffffffffaa8b0ffc RDI: 00000000ffffffff [ 79.694650] RBP: ffffad1dc048bc80 R08: 0000000000000000 R09: ffffad1dc048ba90 [ 79.694662] R10: 0000000000000003 R11: ffffffffaad62fe8 R12: ffff9ff302103138 [ 79.694675] R13: ffff9ff306ec8000 R14: ffff9ff307779078 R15: ffff9ff3014c0270 [ 79.694690] FS: 00007ff1cccf1740(0000) GS:ffff9ff3bc200000(0000) knlGS:0000000000000000 [ 79.694705] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 79.694719] CR2: 0000559ecbcb4420 CR3: 0000000013210000 CR4: 00000000000006f0 [ 79.694734] Call Trace: [ 79.694749] <TASK> [ 79.694761] ? __schedule+0x47f/0x1670 [ 79.694796] ? psb_gem_unpin+0x27/0x1a0 [gma500_gfx] [ 79.694830] ? lock_is_held_type+0xe3/0x140 [ 79.694864] ? ww_mutex_lock+0x38/0xa0 [ 79.694885] ? __cond_resched+0x1c/0x30 [ 79.694902] ww_mutex_lock+0x38/0xa0 [ 79.694925] psb_gem_unpin+0x27/0x1a0 [gma500_gfx] [ 79.694964] psb_gem_unpin+0x199/0x1a0 [gma500_gfx] [ 79.694996] drm_gem_object_release_handle+0x50/0x60 [ 79.695020] ? drm_gem_object_handle_put_unlocked+0xf0/0xf0 [ 79.695042] idr_for_each+0x4b/0xb0 [ 79.695066] ? _raw_spin_unlock_irqrestore+0x30/0x60 [ 79.695095] drm_gem_release+0x1c/0x30 [ 79.695118] drm_file_free.part.0+0x1ea/0x260 [ 79.695150] drm_release+0x6a/0x120 [ 79.695175] __fput+0x9f/0x260 [ 79.695203] task_work_run+0x59/0xa0 [ 79.695227] do_exit+0x387/0xbe0 [ 79.695250] ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90 [ 79.695275] ? lockdep_hardirqs_on+0x7d/0x100 [ 79.695304] do_group_exit+0x33/0xb0 [ 79.695331] __x64_sys_exit_group+0x14/0x20 [ 79.695353] do_syscall_64+0x58/0x80 [ 79.695376] ? up_read+0x17/0x20 [ 79.695401] ? lock_is_held_type+0xe3/0x140 [ 79.695429] ? asm_exc_page_fault+0x22/0x30 [ 79.695450] ? lockdep_hardirqs_on+0x7d/0x100 [ 79.695473] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 79.695493] RIP: 0033:0x7ff1ccefe3f1 [ 79.695516] Code: Unable to access opcode bytes at RIP 0x7ff1ccefe3c7. [ 79.695607] RSP: 002b:00007ffed4413378 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 [ 79.695629] RAX: ffffffffffffffda RBX: 00007ff1cd0159e0 RCX: 00007ff1ccefe3f1 [ 79.695644] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000 [ 79.695656] RBP: 0000000000000000 R08: ffffffffffffff80 R09: 00007ff1cd020b20 [ 79.695671] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ff1cd0159e0 [ 79.695684] R13: 0000000000000000 R14: 00007ff1cd01aee8 R15: 00007ff1cd01af00 [ 79.695733] </TASK> [ 79.695746] irq event stamp: 725979 [ 79.695757] hardirqs last enabled at (725979): [<ffffffffa9132d54>] finish_task_switch.isra.0+0xe4/0x3f0 [ 79.695780] hardirqs last disabled at (725978): [<ffffffffa9eb4113>] __schedule+0xdd3/0x1670 [ 79.695803] softirqs last enabled at (725974): [<ffffffffa90fbc9d>] __irq_exit_rcu+0xed/0x160 [ 79.695825] softirqs last disabled at (725969): [<ffffffffa90fbc9d>] __irq_exit_rcu+0xed/0x160 [ 79.695845] ---[ end trace 0000000000000000 ]--- Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Patrik Jakobsson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.