| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix KASLR base offset to account for symbol offsets in the vmlinux
ELF file, preventing tool breakages like the drgn debugger
- Fix potential memory corruption of physmem_info during kernel
physical address randomization
- Fix potential memory corruption due to overlap between the relocated
lowcore and identity mapping by correctly reserving lowcore memory
- Fix performance regression and avoid randomizing identity mapping
base by default
- Fix unnecessary delay of AP bus binding complete uevent to prevent
startup lag in KVM guests using AP
* tag 's390-6.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/boot: Fix KASLR base offset off by __START_KERNEL bytes
s390/boot: Avoid possible physmem_info segment corruption
s390/ap: Refine AP bus bindings complete processing
s390/mm: Pin identity mapping base to zero
s390/mm: Prevent lowcore vs identity mapping overlap
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The important core fix is another tweak to our discard discovery
issues. The off by 512 in logical block count seems bad, but in fact
the inline was only ever used in debug prints, which is why no-one
noticed"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Do not attempt to configure discard unless LBPME is set
scsi: MAINTAINERS: Add header files to SCSI SUBSYSTEM
scsi: ufs: qcom: Add UFSHCD_QUIRK_BROKEN_LSDBS_CAP for SM8550 SoC
scsi: ufs: core: Add a quirk for handling broken LSDBS field in controller capabilities register
scsi: core: Fix the return value of scsi_logical_block_count()
scsi: MAINTAINERS: Update HiSilicon SAS controller driver maintainer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a tweak to uinput interface to reject requests with abnormally large
number of slots. 100 slots/contacts should be enough for real devices
- support for FocalTech FT8201 added to the edt-ft5x06 driver
- tweaks to i8042 to handle more devices that have issue with its
emulation
- Synaptics touchpad switched to native SMbus/RMI mode on HP Elitebook
840 G2
- other minor fixes
* tag 'input-for-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: himax_hx83112b - fix incorrect size when reading product ID
Input: i8042 - use new forcenorestore quirk to replace old buggy quirk combination
Input: i8042 - add forcenorestore quirk to leave controller untouched even on s3
Input: i8042 - add Fujitsu Lifebook E756 to i8042 quirk table
Input: uinput - reject requests with unreasonable number of slots
Input: edt-ft5x06 - add support for FocalTech FT8201
dt-bindings: input: touchscreen: edt-ft5x06: Document FT8201 support
Input: adc-joystick - fix optional value handling
Input: synaptics - enable SMBus for HP Elitebook 840 G2
Input: ads7846 - ratelimit the spi_sync error message
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes. xe and msm are the major groups, with
amdgpu/i915/nouveau having smaller bits. xe has a bunch of hw
workaround fixes that were found to be missing, so that is why there
are a bunch of scattered fixes, and one larger one. But overall size
doesn't look too out of the ordinary.
msm:
- virtual plane fixes:
- drop yuv on hw where not supported
- csc vs yuv format fix
- rotation fix
- fix fb cleanup on close
- reset phy before link training
- fix visual corruption at 4K
- fix NULL ptr crash on hotplug
- simplify debug macros
- sc7180 fix
- adreno firmware name error path fix
amdgpu:
- GFX10 firmware loading fix
- SDMA 5.2 fix
- Debugfs parameter validation fix
- eGPU hotplug fix
i915:
- fix HDCP timeouts
nouveau:
- fix SG_DEBUG crash
xe:
- Fix OA format masks which were breaking build with gcc-5
- Fix opregion leak (Lucas)
- Fix OA sysfs entry (Ashutosh)
- Fix VM dma-resv lock (Brost)
- Fix tile fini sequence (Brost)
- Prevent UAF around preempt fence (Auld)
- Fix DGFX display suspend/resume (Maarten)
- Many Xe/Xe2 critical workarounds (Auld, Ngai-Mint, Bommu, Tejas, Daniele)
- Fix devm/drmm issues (Daniele)
- Fix missing workqueue destroy in xe_gt_pagefault (Stuart)
- Drop HW fence pointer to HW fence ctx (Brost)
- Free job before xe_exec_queue_put (Brost)"
* tag 'drm-fixes-2024-08-24' of https://gitlab.freedesktop.org/drm/kernel: (35 commits)
drm/xe: Free job before xe_exec_queue_put
drm/xe: Drop HW fence pointer to HW fence ctx
drm/xe: Fix missing workqueue destroy in xe_gt_pagefault
drm/amdgpu: fix eGPU hotplug regression
drm/amdgpu: Validate TA binary size
drm/amdgpu/sdma5.2: limit wptr workaround to sdma 5.2.1
drm/amdgpu: fixing rlc firmware loading failure issue
drm/xe/uc: Use devm to register cleanup that includes exec_queues
drm/xe: use devm instead of drmm for managed bo
drm/xe/xe2hpg: Add Wa_14021821874
drm/xe: fix WA 14018094691
drm/xe/xe2: Add Wa_15015404425
drm/xe/xe2: Make subsequent L2 flush sequential
drm/xe/xe2lpg: Extend workaround 14021402888
drm/xe/xe2lpm: Extend Wa_16021639441
drm/xe/bmg: implement Wa_16023588340
drm/xe/oa/uapi: Make bit masks unsigned
drm/xe/display: Make display suspend/resume work on discrete
drm/xe: prevent UAF around preempt fence
drm/xe: Fix tile fini sequence
...
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith
- Remove unused struct field (Nilay)
- Fix fabrics keep-alive teardown order (Ming)
- Write zeroes fixes (John)
* tag 'block-6.11-20240823' of git://git.kernel.dk/linux:
nvme: Remove unused field
nvme: move stopping keep-alive into nvme_uninit_ctrl()
block: Drop NULL check in bdev_write_zeroes_sectors()
block: Read max write zeroes once for __blkdev_issue_write_zeroes()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix backlight control on a Dell All In One system where a backlight
controller board is attached to a UART port and the dell-uart
backlight driver binds to it, but the backlight is actually controlled
by other means (Hans de Goede)"
* tag 'acpi-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: video: Add backlight=native quirk for Dell OptiPlex 7760 AIO
platform/x86: dell-uart-backlight: Use acpi_video_get_backlight_type()
ACPI: video: Add Dell UART backlight controller detection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix error handling in the thermal debug code and OF node
reference leaks in the thermal OF driver.
Specifics:
- Use IS_ERR() in checks of debugfs_create_dir() return value instead
of checking it against NULL in the thermal debug code (Yang Ruibin)
- Fix three OF node reference leaks in thermal_of (Krzysztof
Kozlowski)"
* tag 'thermal-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: of: Fix OF node leak in of_thermal_zone_find() error paths
thermal: of: Fix OF node leak in thermal_of_zone_register()
thermal: of: Fix OF node leak in thermal_of_trips_init() error path
thermal/debugfs: Fix the NULL vs IS_ERR() confusion in debugfs_create_dir()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull mmc fixes from Ulf Hansson:
"MMC core:
- Fix NULL dereference for mmc_test on allocation failure
MMC host:
- dw_mmc: Fix support for deferred probe for biu/ciu clocks
- mtk-sd: Fix CMD8 support when fragile tuning settings"
* tag 'mmc-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: mmc_test: Fix NULL dereference on allocation failure
mmc: dw_mmc: allow biu and ciu clocks to defer
mmc: mtk-sd: receive cmd8 data when hs400 tuning fail
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of fixes here, all driver specific and none of them
too serious. For whatever reason runtime PM seems to have been causing
a bunch of issues recently"
* tag 'spi-fix-v6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: pxa2xx: Move PM runtime handling to the glue drivers
spi: pxa2xx: Do not override dev->platform_data on probe
spi: spi-fsl-lpspi: limit PRESCALE bit in TCR register
spi: spi-cadence-quadspi: Fix OSPI NOR failures during system resume
spi: zynqmp-gqspi: Scale timeout by data size
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing fix from Bartosz Golaszewski:
- request the wlan-enable GPIO "as-is" to fix an issue with the wifi
module being already powered up before linux boots
* tag 'pwrseq-fixes-for-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: request the WLAN enable GPIO as-is
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
- imx: Remove duplicated clocks for scu power domain
- imx: Wait for SSAR to complete power-on for i.MX93 power domain
* tag 'pmdomain-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: imx: wait SSAR when i.MX93 power domain on
pmdomain: imx: scu-pd: Remove duplicated clocks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Fix the max segment size and max number of segments supported by the
pata_macio driver to fix issues with BIO splitting leading to an
overflow of the adapter DMA table (from Michael)
- Related to the previous fix, change BUG_ON() calls for incorrect
command buffer segmentation into WARN_ON() and an error return (from
Michael)
* tag 'ata-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: pata_macio: Use WARN instead of BUG
ata: pata_macio: Fix DMA table overflow
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and netfilter.
Current release - regressions:
- virtio_net: avoid crash on resume - move netdev_tx_reset_queue()
call before RX napi enable
Current release - new code bugs:
- net/mlx5e: fix page leak and incorrect header release w/ HW GRO
Previous releases - regressions:
- udp: fix receiving fraglist GSO packets
- tcp: prevent refcount underflow due to concurrent execution of
tcp_sk_exit_batch()
Previous releases - always broken:
- ipv6: fix possible UAF when incrementing error counters on output
- ip6: tunnel: prevent merging of packets with different L2
- mptcp: pm: fix IDs not being reusable
- bonding: fix potential crashes in IPsec offload handling
- Bluetooth: HCI:
- MGMT: add error handling to pair_device() to avoid a crash
- invert LE State quirk to be opt-out rather then opt-in
- fix LE quote calculation
- drv: dsa: VLAN fixes for Ocelot driver
- drv: igb: cope with large MAX_SKB_FRAGS Kconfig settings
- drv: ice: fi Rx data path on architectures with PAGE_SIZE >= 8192
Misc:
- netpoll: do not export netpoll_poll_[disable|enable]()
- MAINTAINERS: update the list of networking headers"
* tag 'net-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits)
s390/iucv: Fix vargs handling in iucv_alloc_device()
net: ovs: fix ovs_drop_reasons error
net: xilinx: axienet: Fix dangling multicast addresses
net: xilinx: axienet: Always disable promiscuous mode
MAINTAINERS: Mark JME Network Driver as Odd Fixes
MAINTAINERS: Add header files to NETWORKING sections
MAINTAINERS: Add limited globs for Networking headers
MAINTAINERS: Add net_tstamp.h to SOCKET TIMESTAMPING section
MAINTAINERS: Add sonet.h to ATM section of MAINTAINERS
octeontx2-af: Fix CPT AF register offset calculation
net: phy: realtek: Fix setting of PHY LEDs Mode B bit on RTL8211F
net: ngbe: Fix phy mode set to external phy
netfilter: flowtable: validate vlan header
bnxt_en: Fix double DMA unmapping for XDP_REDIRECT
ipv6: prevent possible UAF in ip6_xmit()
ipv6: fix possible UAF in ip6_finish_output2()
ipv6: prevent UAF in ip6_send_skb()
netpoll: do not export netpoll_poll_[disable|enable]()
selftests: mlxsw: ethtool_lanes: Source ethtool lib from correct path
udp: fix receiving fraglist GSO packets
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Eliminate the fdtoverlay command duplication in scripts/Makefile.lib
- Fix 'make compile_commands.json' for external modules
- Ensure scripts/kconfig/merge_config.sh handles missing newlines
- Fix some build errors on macOS
* tag 'kbuild-fixes-v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: fix typos "prequisites" to "prerequisites"
Documentation/llvm: turn make command for ccache into code block
kbuild: avoid scripts/kallsyms parsing /dev/null
treewide: remove unnecessary <linux/version.h> inclusion
scripts: kconfig: merge_config: config files: add a trailing newline
Makefile: add $(srctree) to dependency of compile_commands.json target
kbuild: clean up code duplication in cmd_fdtoverlay
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
- Fix OA format masks which were breaking build with gcc-5 (Geert)
Driver Changes:
- Fix opregion leak (Lucas)
- Fix OA sysfs entry (Ashutosh)
- Fix VM dma-resv lock (Brost)
- Fix tile fini sequence (Brost)
- Prevent UAF around preempt fence (Auld)
- Fix DGFX display suspend/resume (Maarten)
- Many Xe/Xe2 critical workarounds (Auld, Ngai-Mint, Bommu, Tejas, Daniele)
- Fix devm/drmm issues (Daniele)
- Fix missing workqueue destroy in xe_gt_pagefault (Stuart)
- Drop HW fence pointer to HW fence ctx (Brost)
- Free job before xe_exec_queue_put (Brost)
Signed-off-by: Dave Airlie <[email protected]>
From: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
nouveau:
- firmware: use dma non-coherent allocator
Signed-off-by: Dave Airlie <[email protected]>
From: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Fix for HDCP timeouts
Signed-off-by: Dave Airlie <[email protected]>
From: Joonas Lahtinen <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.11-2024-08-21:
amdgpu:
- GFX10 firmware loading fix
- SDMA 5.2 fix
- Debugfs parameter validation fix
- eGPU hotplug fix
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
Fixes for v6.11-rc5
1) Fixes from the virtual plane series, namely
- fix the list of formats for QCM2290 since it has no YUV support
- minor fix in dpu_plane_atomic_check_pipe() to check only for csc and
not csc and scaler while allowing yuv formats
- take rotation into account while allocating virtual planes
2) Fix to cleanup FB if dpu_format_populate_layout() fails. This fixes the
warning splat during DRM file closure
3) Fix to reset the phy link params before re-starting link training. This
fixes the 100% link training failure when someone starts modetest while
cable is connected
4) Long pending fix to fix a visual corruption seen for 4k modes. Root-cause
was we cannot support 4k@30 with 30bpp with 2 lanes so this is a critical
fix to use 24bpp for such cases
5) Fix to move dpu encoder's connector assignment to atomic_enable(). This
fixes the NULL ptr crash for cases when there is an atomic_enable()
without atomic_modeset() after atomic_disable() . This happens for
connectors_changed case of crtc. It fixes a NULL ptr crash reported
during hotplug.
6) Fix to simplify DPU's debug macros without which dynamic debug does not
work as expected
7) Fix the highest bank bit setting for sc7180
8) adreno: fix error return if missing firmware-name
Signed-off-by: Dave Airlie <[email protected]>
From: Rob Clark <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvxF2p3-AsjUydmSYrA0Vb+Ea7nh3VtNX0pT0Ae_Me-Kw@mail.gmail.com
|
|
The "name" field in struct nvme_ctrl is unsued so removing it.
This would help save 12 bytes of space for each nvme_ctrl instance
created.
Signed-off-by: Nilay Shroff <[email protected]>
Reviewed-by: Kanchan Joshi <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
Commit 4733b65d82bd ("nvme: start keep-alive after admin queue setup")
moves starting keep-alive from nvme_start_ctrl() into
nvme_init_ctrl_finish(), but don't move stopping keep-alive into
nvme_uninit_ctrl(), so keep-alive work can be started and keep pending
after failing to start controller, finally use-after-free is triggered if
nvme host driver is unloaded.
This patch fixes kernel panic when running nvme/004 in case that connection
failure is triggered, by moving stopping keep-alive into nvme_uninit_ctrl().
This way is reasonable because keep-alive is now started in
nvme_init_ctrl_finish().
Fixes: 3af755a46881 ("nvme: move nvme_stop_keep_alive() back to original position")
Cc: Hannes Reinecke <[email protected]>
Cc: Mark O'Donovan <[email protected]>
Reported-by: Changhui Zhong <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
If a multicast address is removed but there are still some multicast
addresses, that address would remain programmed into the frame filter.
Fix this by explicitly setting the enable bit for each filter.
Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Sean Anderson <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
If promiscuous mode is disabled when there are fewer than four multicast
addresses, then it will not be reflected in the hardware. Fix this by
always clearing the promiscuous mode flag even when we program multicast
addresses.
Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Sean Anderson <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Terminating for_each_available_child_of_node() loop requires dropping OF
node reference, so bailing out on errors misses this. Solve the OF node
reference leak with scoped for_each_available_child_of_node_scoped().
Fixes: 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization")
Cc: <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
thermal_of_zone_register() calls of_thermal_zone_find() which will
iterate over OF nodes with for_each_available_child_of_node() to find
matching thermal zone node. When it finds such, it exits the loop and
returns the node. Prematurely ending for_each_available_child_of_node()
loops requires dropping OF node reference, thus success of
of_thermal_zone_find() means that caller must drop the reference.
Fixes: 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization")
Cc: All applicable <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Terminating for_each_child_of_node() loop requires dropping OF node
reference, so bailing out after thermal_of_populate_trip() error misses
this. Solve the OF node reference leak with scoped
for_each_child_of_node_scoped().
Fixes: d0c75fa2c17f ("thermal/of: Initialize trip points separately")
Cc: All applicable <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
PCI and platform buses have different defaults for runtime PM.
In particular PCI probe is assumed to be called when PM runtime
is enabled by the PCI core. In this case if we try enable it again
the PM runtime complaints with
pxa2xx_spi_pci 0000:00:07.0: Unbalanced pm_runtime_enable!
Fix this by moving PM runtime handling from the SPI PXA2xx core
to the glue drivers.
Fixes: cc160697a576 ("spi: pxa2xx: Convert PCI driver to use spi-pxa2xx code directly")
Fixes: 3d8f037fbcab ("spi: pxa2xx: Move platform driver to a separate file")
Fixes: 20ade9b9771c ("spi: pxa2xx: Extract pxa2xx_spi_platform_*() callbacks")
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The platform_data field may be supplied by legacy board code.
In other cases we override it, and module remove and probe cycle
will crash the kernel since it will carry a stale pointer.
Fix this by supplying a third argument to the pxa2xx_spi_probe()
and avoid overriding dev->platform_data.
Reported-by: Hao Ma <[email protected]>
Fixes: cc160697a576 ("spi: pxa2xx: Convert PCI driver to use spi-pxa2xx code directly")
Fixes: 3d8f037fbcab ("spi: pxa2xx: Move platform driver to a separate file")
Fixes: 20ade9b9771c ("spi: pxa2xx: Extract pxa2xx_spi_platform_*() callbacks")
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Some CPT AF registers are per LF and others are global. Translation
of PF/VF local LF slot number to actual LF slot number is required
only for accessing perf LF registers. CPT AF global registers access
do not require any LF slot number. Also, there is no reason CPT
PF/VF to know actual lf's register offset.
Without this fix microcode loading will fail, VFs cannot be created
and hardware is not usable.
Fixes: bc35e28af789 ("octeontx2-af: replace cpt slot with lf id on reg write")
Signed-off-by: Bharat Bhushan <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The current implementation incorrectly sets the mode bit of the PHY chip.
Bit 15 (RTL8211F_LEDCR_MODE) should not be shifted together with the
configuration nibble of a LED- it should be set independently of the
index of the LED being configured.
As a consequence, the RTL8211F LED control is actually operating in Mode A.
Fix the error by or-ing final register value to write with a const-value of
RTL8211F_LEDCR_MODE, thus setting Mode bit explicitly.
Fixes: 17784801d888 ("net: phy: realtek: Add support for PHY LEDs on RTL8211F")
Signed-off-by: Sava Jakovljev <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Link: https://patch.msgid.link/PAWP192MB21287372F30C4E55B6DF6158C38E2@PAWP192MB2128.EURP192.PROD.OUTLOOK.COM
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The MAC only has add the TX delay and it can not be modified.
MAC and PHY are both set the TX delay cause transmission problems.
So just disable TX delay in PHY, when use rgmii to attach to
external phy, set PHY_INTERFACE_MODE_RGMII_RXID to phy drivers.
And it is does not matter to internal phy.
Fixes: bc2426d74aa3 ("net: ngbe: convert phylib to phylink")
Signed-off-by: Mengyuan Lou <[email protected]>
Cc: [email protected] # 6.3+
Reviewed-by: Jacob Keller <[email protected]>
Link: https://patch.msgid.link/E6759CF1387CF84C+20240820030425.93003-1-mengyuanlou@net-swift.com
Signed-off-by: Paolo Abeni <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-08-20 (ice)
This series contains updates to ice driver only.
Maciej fixes issues with Rx data path on architectures with
PAGE_SIZE >= 8192; correcting page reuse usage and calculations for
last offset and truesize.
Michal corrects assignment of devlink port number to use PF id.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: use internal pf id instead of function number
ice: fix truesize operations for PAGE_SIZE >= 8192
ice: fix ICE_LAST_OFFSET formula
ice: fix page reuse when PAGE_SIZE is over 8k
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Remove the dma_unmap_page_attrs() call in the driver's XDP_REDIRECT
code path. This should have been removed when we let the page pool
handle the DMA mapping. This bug causes the warning:
WARNING: CPU: 7 PID: 59 at drivers/iommu/dma-iommu.c:1198 iommu_dma_unmap_page+0xd5/0x100
CPU: 7 PID: 59 Comm: ksoftirqd/7 Tainted: G W 6.8.0-1010-gcp #11-Ubuntu
Hardware name: Dell Inc. PowerEdge R7525/0PYVT1, BIOS 2.15.2 04/02/2024
RIP: 0010:iommu_dma_unmap_page+0xd5/0x100
Code: 89 ee 48 89 df e8 cb f2 69 ff 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 c9 31 f6 31 ff 45 31 c0 e9 ab 17 71 00 <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 c9
RSP: 0018:ffffab1fc0597a48 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff99ff838280c8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffab1fc0597a78 R08: 0000000000000002 R09: ffffab1fc0597c1c
R10: ffffab1fc0597cd3 R11: ffff99ffe375acd8 R12: 00000000e65b9000
R13: 0000000000000050 R14: 0000000000001000 R15: 0000000000000002
FS: 0000000000000000(0000) GS:ffff9a06efb80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000565c34c37210 CR3: 00000005c7e3e000 CR4: 0000000000350ef0
? show_regs+0x6d/0x80
? __warn+0x89/0x150
? iommu_dma_unmap_page+0xd5/0x100
? report_bug+0x16a/0x190
? handle_bug+0x51/0xa0
? exc_invalid_op+0x18/0x80
? iommu_dma_unmap_page+0xd5/0x100
? iommu_dma_unmap_page+0x35/0x100
dma_unmap_page_attrs+0x55/0x220
? bpf_prog_4d7e87c0d30db711_xdp_dispatcher+0x64/0x9f
bnxt_rx_xdp+0x237/0x520 [bnxt_en]
bnxt_rx_pkt+0x640/0xdd0 [bnxt_en]
__bnxt_poll_work+0x1a1/0x3d0 [bnxt_en]
bnxt_poll+0xaa/0x1e0 [bnxt_en]
__napi_poll+0x33/0x1e0
net_rx_action+0x18a/0x2f0
Fixes: 578fcfd26e2a ("bnxt_en: Let the page pool manage the DMA mapping")
Reviewed-by: Andy Gospodarek <[email protected]>
Reviewed-by: Kalesh AP <[email protected]>
Signed-off-by: Somnath Kotur <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- ISST: Fix an error-handling corner case
- platform/surface: aggregator: Minor corner case fix and new HW
support
* tag 'platform-drivers-x86-v6.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: ISST: Fix return value on last invalid resource
platform/surface: aggregator: Fix warning when controller is destroyed in probe
platform/surface: aggregator_registry: Add support for Surface Laptop 6
platform/surface: aggregator_registry: Add fan and thermal sensor support for Surface Laptop 5
platform/surface: aggregator_registry: Add support for Surface Laptop Studio 2
platform/surface: aggregator_registry: Add support for Surface Laptop Go 3
platform/surface: aggregator_registry: Add Support for Surface Pro 10
platform/x86: asus-wmi: Add quirk for ROG Ally X
|
|
The debugfs_create_dir() return value is never NULL, it is either a
valid pointer or an error one.
Use IS_ERR() to check it.
Fixes: 7ef01f228c9f ("thermal/debugfs: Add thermal debugfs information for mitigation episodes")
Fixes: 755113d76786 ("thermal/debugfs: Add thermal cooling device debugfs information")
Signed-off-by: Yang Ruibin <[email protected]>
Link: https://patch.msgid.link/[email protected]
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Free job depends on job->vm being valid, the last xe_exec_queue_put can
destroy the VM. Prevent UAF by freeing job before xe_exec_queue_put.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Nirmoy Das <[email protected]>
Reviewed-by: Jagmeet Randhawa <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 32a42c93b74c8ca6d0915ea3eba21bceff53042f)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
The HW fence ctx objects are not ref counted rather tied to the life of
an LRC object. HW fences reference the HW fence ctx, HW fences can
outlive LRCs thus resulting in UAF. Drop the HW fence pointer to HW
fence ctx rather just store what is needed directly in HW fence.
v2:
- Fix typo in commit (Ashutosh)
- Use snprintf (Ashutosh)
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Ashutosh Dixit <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 60db6f540af9f93144d5039140aa2ed17171d168)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
On driver reload we never free up the memory for the pagefault and
access counter workqueues. Add those destroy calls here.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Stuart Summers <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Matthew Brost <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/c9a951505271dc3a7aee76de7656679f69c11518.1723862633.git.stuart.summers@intel.com
(cherry picked from commit 7586fc52b14e0b8edd0d1f8a434e0de2078b7b2b)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
With the rework of the AP bus scan and the introduction of
a bindings complete completion also the timing until the
userspace finally receives a AP bus binding complete uevent
had increased. Unfortunately this event triggers some important
jobs for preparation of KVM guests, for example the modification
of card/queue masks to reassign AP resources to the alternate
AP queue device driver (vfio_ap) which is the precondition
for building mediated devices which may be a precondition for
starting KVM guests using AP resources.
This small fix now triggers the check for binding complete
each time an AP device driver has registered. With this patch
the bindings complete may be posted up to 30s earlier as there
is no need to wait for the next AP bus scan any more.
Fixes: 778412ab915d ("s390/ap: rearm APQNs bindings complete completion")
Signed-off-by: Harald Freudenberger <[email protected]>
Reviewed-by: Holger Dengler <[email protected]>
Cc: [email protected]
Acked-by: Alexander Gordeev <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
|
|
The overflow/underflow conditions in pata_macio_qc_prep() should never
happen. But if they do there's no need to kill the system entirely, a
WARN and failing the IO request should be sufficient and might allow the
system to keep running.
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
|
|
Kolbjørn and Jonáš reported that their 32-bit PowerMacs were crashing
in pata-macio since commit 09fe2bfa6b83 ("ata: pata_macio: Fix
max_segment_size with PAGE_SIZE == 64K").
For example:
kernel BUG at drivers/ata/pata_macio.c:544!
Oops: Exception in kernel mode, sig: 5 [#1]
BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 DEBUG_PAGEALLOC PowerMac
...
NIP pata_macio_qc_prep+0xf4/0x190
LR pata_macio_qc_prep+0xfc/0x190
Call Trace:
0xc1421660 (unreliable)
ata_qc_issue+0x14c/0x2d4
__ata_scsi_queuecmd+0x200/0x53c
ata_scsi_queuecmd+0x50/0xe0
scsi_queue_rq+0x788/0xb1c
__blk_mq_issue_directly+0x58/0xf4
blk_mq_plug_issue_direct+0x8c/0x1b4
blk_mq_flush_plug_list.part.0+0x584/0x5e0
__blk_flush_plug+0xf8/0x194
__submit_bio+0x1b8/0x2e0
submit_bio_noacct_nocheck+0x230/0x304
btrfs_work_helper+0x200/0x338
process_one_work+0x1a8/0x338
worker_thread+0x364/0x4c0
kthread+0x100/0x104
start_kernel_thread+0x10/0x14
That commit increased max_segment_size to 64KB, with the justification
that the SCSI core was already using that size when PAGE_SIZE == 64KB,
and that there was existing logic to split over-sized requests.
However with a sufficiently large request, the splitting logic causes
each sg to be split into two commands in the DMA table, leading to
overflow of the DMA table, triggering the BUG_ON().
With default settings the bug doesn't trigger, because the request size
is limited by max_sectors_kb == 1280, however max_sectors_kb can be
increased, and apparently some distros do that by default using udev
rules.
Fix the bug for 4KB kernels by reverting to the old max_segment_size.
For 64KB kernels the sg_tablesize needs to be halved, to allow for the
possibility that each sg will be split into two.
Fixes: 09fe2bfa6b83 ("ata: pata_macio: Fix max_segment_size with PAGE_SIZE == 64K")
Cc: [email protected] # v6.10+
Reported-by: Kolbjørn Barmen <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]/
Reported-by: Jonáš Vidra <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]/
Tested-by: Kolbjørn Barmen <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
|
|
The driver needs to wait for the on board firmware
to finish its initialization before probing the card.
Commit 959056982a9b ("drm/amdgpu: Fix discovery initialization failure during pci rescan")
switched from using msleep() to using usleep_range() which
seems to have caused init failures on some navi1x boards. Switch
back to msleep().
Fixes: 959056982a9b ("drm/amdgpu: Fix discovery initialization failure during pci rescan")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3559
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3500
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: Ma Jun <[email protected]>
(cherry picked from commit c69b07f7bbc905022491c45097923d3487479529)
Cc: [email protected] # 6.10.x
|
|
Add TA binary size validation to avoid OOB write.
Signed-off-by: Candice Li <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
(cherry picked from commit c0a04e3570d72aaf090962156ad085e37c62e442)
Cc: [email protected]
|
|
The workaround seems to cause stability issues on other
SDMA 5.2.x IPs.
Fixes: a03ebf116303 ("drm/amdgpu/sdma5.2: Update wptr registers as well as doorbell")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3556
Acked-by: Ruijing Dong <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
(cherry picked from commit 2dc3851ef7d9c5439ea8e9623fc36878f3b40649)
Cc: [email protected]
|
|
Skip rlc firmware validation to ignore firmware header size mismatch issues.
This restores the workaround added in
commit 849e133c973c ("drm/amdgpu: Fix the null pointer when load rlc firmware")
Fixes: 3af2c80ae2f5 ("drm/amdgpu: refine gfx10 firmware loading")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3551
Signed-off-by: Yang Wang <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
(cherry picked from commit 89ec85d16eb8110d88c273d1d34f1fe5a70ba8cc)
|
|
If an ATU violation was caused by a CPU Load operation, the SPID could
be larger than DSA_MAX_PORTS (the size of mv88e6xxx_chip.ports[] array).
Fixes: 75c05a74e745 ("net: dsa: mv88e6xxx: Fix counting of ATU violations")
Signed-off-by: Joseph Huang <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
- Incorrect error unwind in iommufd_device_do_replace()
- Correct a sparse warning missing static
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd/selftest: Make dirty_ops static
iommufd/device: Fix hwpt at err_unresv in iommufd_device_do_replace()
|
|
When performing the port_hwtstamp_set operation, ptp_schedule_worker()
will be called if hardware timestamoing is enabled on any of the ports.
When using multiple ports for PTP, port_hwtstamp_set is executed for
each port. When called for the first time ptp_schedule_worker() returns
0. On subsequent calls it returns 1, indicating the worker is already
scheduled. Currently the ksz driver treats 1 as an error and fails to
complete the port_hwtstamp_set operation, thus leaving the timestamping
configuration for those ports unchanged.
This patch fixes this by ignoring the ptp_schedule_worker() return
value.
Cc: [email protected]
Link: https://lore.kernel.org/[email protected]
Fixes: bb01ad30570b0 ("net: dsa: microchip: ptp: manipulating absolute time using ptp hw clock")
Signed-off-by: Martin Whitaker <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Acked-by: Arun Ramadoss <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Sabrina reports that the igb driver does not cope well with large
MAX_SKB_FRAG values: setting MAX_SKB_FRAG to 45 causes payload
corruption on TX.
An easy reproducer is to run ssh to connect to the machine. With
MAX_SKB_FRAGS=17 it works, with MAX_SKB_FRAGS=45 it fails. This has
been reported originally in
https://bugzilla.redhat.com/show_bug.cgi?id=2265320
The root cause of the issue is that the driver does not take into
account properly the (possibly large) shared info size when selecting
the ring layout, and will try to fit two packets inside the same 4K
page even when the 1st fraglist will trump over the 2nd head.
Address the issue by checking if 2K buffers are insufficient.
Fixes: 3948b05950fd ("net: introduce a config option to tweak MAX_SKB_FRAGS")
Reported-by: Jan Tluka <[email protected]>
Reported-by: Jirka Hladky <[email protected]>
Reported-by: Sabrina Dubroca <[email protected]>
Tested-by: Sabrina Dubroca <[email protected]>
Tested-by: Corinna Vinschen <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Corinna Vinschen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
It is done everywhere in cxgb4 code, e.g. in is_filter_exact_match()
There is no reason it should not be done here
Found by Linux Verification Center (linuxtesting.org) with SVACE
Signed-off-by: Nikolay Kuratov <[email protected]>
Cc: [email protected]
Fixes: 12b276fbf6e0 ("cxgb4: add support to create hash filters")
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|