aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2019-11-06drm/amdgpu/renoir: move gfxoff handling into gfx9 moduleAlex Deucher2-5/+6
To properly handle the option parsing ordering. Reviewed-by: Yong Zhao <yong.zhao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-06drm/amdgpu: add warning for GRBM 1-cycle delay issue in gfx9changzhu1-0/+7
It needs to add warning to update firmware in gfx9 in case that firmware is too old to have function to realize dummy read in cp firmware. Signed-off-by: changzhu <Changfeng.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-06drm/amdgpu: add dummy read by engines for some GCVM status registers in gfx10changzhu4-6/+64
The GRBM register interface is now capable of bursting 1 cycle per register wr->wr, wr->rd much faster than previous muticycle per transaction done interface. This has caused a problem where status registers requiring HW to update have a 1 cycle delay, due to the register update having to go through GRBM. For cp ucode, it has realized dummy read in cp firmware.It covers the use of WAIT_REG_MEM operation 1 case only.So it needs to call gfx_v10_0_wait_reg_mem in gfx10. Besides it also needs to add warning to update firmware in case firmware is too old to have function to realize dummy read in cp firmware. For sdma ucode, it hasn't realized dummy read in sdma firmware. sdma is moved to gfxhub in gfx10. So it needs to add dummy read in driver between amdgpu_ring_emit_wreg and amdgpu_ring_emit_reg_wait for sdma_v5_0. Signed-off-by: changzhu <Changfeng.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-06drm/amdgpu: register gpu instance before fan boost feature enablmentEvan Quan2-1/+7
Otherwise, the feature enablement will be skipped due to wrong count. Fixes: beff74bc6e0fa91 ("drm/amdgpu: fix a race in GPU reset with IB test (v2)") Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-06drm/amd/swSMU: fix smu workload bit map errorKevin Wang2-2/+2
fix workload bit (WORKLOAD_PPLIB_COMPUTE_BIT) map error on vega20 and navi asic. fix commit: drm/amd/powerplay: add function get_workload_type_map for swsmu Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-06net: mscc: ocelot: fix __ocelot_rmw_ix prototypeVladimir Oltean1-1/+1
The "read-modify-write register index" function is declared with a confusing prototype: the "mask" and "reg" arguments are swapped. Fortunately, this does not affect callers so far. Both arguments are u32, and the wrapper macros (ocelot_rmw_ix etc) have the arguments in the correct order (the one from ocelot_io.c). Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-06net: mscc: ocelot: fix NULL pointer on LAG slave removalClaudiu Manoil1-1/+2
lag_upper_info may be NULL on slave removal. Fixes: dc96ee3730fc ("net: mscc: ocelot: add bonding support") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-06net: mscc: ocelot: don't handle netdev events for other netdevsClaudiu Manoil1-3/+3
The check that the event is actually for this device should be moved from the "port" handler to the net device handler. Otherwise the port handler will deny bonding configuration for other net devices in the same system (like enetc in the LS1028A) that don't have the lag_upper_info->tx_type restriction that ocelot has. Fixes: dc96ee3730fc ("net: mscc: ocelot: add bonding support") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-06net/mlx5e: Use correct enum to determine uplink portDmytro Linkin1-1/+2
For vlan push action, if eswitch flow source capability is enabled, flow source value compared with MLX5_VPORT_UPLINK enum, to determine uplink port. This lead to syndrome in dmesg if try to add vlan push action. For example: $ tc filter add dev vxlan0 ingress protocol ip prio 1 flower \ enc_dst_port 4789 \ action tunnel_key unset pipe \ action vlan push id 20 pipe \ action mirred egress redirect dev ens1f0_0 $ dmesg ... [ 2456.883693] mlx5_core 0000:82:00.0: mlx5_cmd_check:756:(pid 5273): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0xa9c090) Use the correct enum value MLX5_FLOW_CONTEXT_FLOW_SOURCE_UPLINK. Fixes: bb204dcf39fe ("net/mlx5e: Determine source port properly for vlan push action") Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-06net/mlx5: DR, Fix memory leak during rule creationAlex Vesker1-0/+2
During rule creation hw_ste_arr was not freed. Fixes: 41d07074154c ("net/mlx5: DR, Expose steering rule functionality") Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-06net/mlx5: DR, Fix memory leak in modify action destroyAlex Vesker1-0/+1
The rewrite data was no freed. Fixes: 9db810ed2d37 ("net/mlx5: DR, Expose steering action functionality") Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-06net/mlx5e: Fix eswitch debug print of max fdb flowRoi Dayan1-1/+1
The value is already the calculation so remove the log prefix. Fixes: e52c28024008 ("net/mlx5: E-Switch, Add chains and priorities") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-06HID: wacom: generic: Treat serial number and related fields as unsignedJason Gerecke2-4/+21
The HID descriptors for most Wacom devices oddly declare the serial number and other related fields as signed integers. When these numbers are ingested by the HID subsystem, they are automatically sign-extended into 32-bit integers. We treat the fields as unsigned elsewhere in the kernel and userspace, however, so this sign-extension causes problems. In particular, the sign-extended tool ID sent to userspace as ABS_MISC does not properly match unsigned IDs used by xf86-input-wacom and libwacom. We introduce a function 'wacom_s32tou' that can undo the automatic sign extension performed by 'hid_snto32'. We call this function when processing the serial number and related fields to ensure that we are dealing with and reporting the unsigned form. We opt to use this method rather than adding a descriptor fixup in 'wacom_hid_usage_quirk' since it should be more robust in the face of future devices. Ref: https://github.com/linuxwacom/input-wacom/issues/134 Fixes: f85c9dc678 ("HID: wacom: generic: Support tool ID and additional tool types") CC: <stable@vger.kernel.org> # v4.10+ Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-11-06drm/amdgpu: add navi14 PCI IDTianci.Yin1-0/+1
Add the navi14 PCI device id. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-06Revert "drm/amd/display: setting the DIG_MODE to the correct value."Zhan Liu1-9/+0
This reverts commit 385857adb8154563840e5b0f200254126618f464. Reason for revert: Root cause of this issue is found. The workaround is not needed anymore. Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-06drm/amd/display: Add ENGINE_ID_DIGD condition check for Navi14Zhan Liu1-0/+5
[Why] Navi10 has 6 PHY, but Navi14 only has 5 PHY, that is because there is no ENGINE_ID_DIGD in Navi14. Without this patch, many HDMI related issues (e.g. HDMI S3 resume failure, HDMI pink screen on boot) will be observed. [How] If "eng_id" is larger than ENGINE_ID_DIGD, then add "eng_id" by 1. Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-06drm/amdgpu: dont schedule jobs while in resetShirish S1-1/+4
[Why] doing kthread_park()/unpark() from drm_sched_entity_fini while GPU reset is in progress defeats all the purpose of drm_sched_stop->kthread_park. If drm_sched_entity_fini->kthread_unpark() happens AFTER drm_sched_stop->kthread_park nothing prevents from another (third) thread to keep submitting job to HW which will be picked up by the unparked scheduler thread and try to submit to HW but fail because the HW ring is deactivated. [How] grab the reset lock before calling drm_sched_entity_fini() Signed-off-by: Shirish S <shirish.s@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-06drm/amdgpu/arcturus: properly set BANK_SELECT and FRAGMENT_SIZEAlex Deucher1-0/+9
These were not aligned for optimal performance for GPUVM. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-06net: bcmgenet: reapply manual settings to the PHYDoug Berger1-1/+4
The phy_init_hw() function may reset the PHY to a configuration that does not match manual network settings stored in the phydev structure. If the phy state machine is polled rather than event driven this can create a timing hazard where the phy state machine might alter the settings stored in the phydev structure from the value read from the BMCR. This commit follows invocations of phy_init_hw() by the bcmgenet driver with invocations of the genphy_config_aneg() function to ensure that the BMCR is written to match the settings held in the phydev structure. This prevents the risk of manual settings being accidentally altered. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-06Revert "net: bcmgenet: soft reset 40nm EPHYs before MAC init"Doug Berger3-69/+73
This reverts commit 1f515486275a08a17a2c806b844cca18f7de5b34. This commit improved the chances of the umac resetting cleanly by ensuring that the PHY was restored to its normal operation prior to resetting the umac. However, there were still cases when the PHY might not be driving a Tx clock to the umac during this window (e.g. when the PHY detects no link). The previous commit now ensures that the unimac receives clocks from the MAC during its reset window so this commit is no longer needed. This commit also has an unintended negative impact on the MDIO performance of the UniMAC MDIO interface because it is used before the MDIO interrupts are reenabled, so it should be removed. Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-06net: bcmgenet: use RGMII loopback for MAC resetDoug Berger2-2/+33
As noted in commit 28c2d1a7a0bf ("net: bcmgenet: enable loopback during UniMAC sw_reset") the UniMAC must be clocked while sw_reset is asserted for its state machines to reset cleanly. The transmit and receive clocks used by the UniMAC are derived from the signals used on its PHY interface. The bcmgenet MAC can be configured to work with different PHY interfaces including MII, GMII, RGMII, and Reverse MII on internal and external interfaces. Unfortunately for the UniMAC, when configured for MII the Tx clock is always driven from the PHY which places it outside of the direct control of the MAC. The earlier commit enabled a local loopback mode within the UniMAC so that the receive clock would be derived from the transmit clock which addressed the observed issue with an external GPHY disabling it's Rx clock. However, when a Tx clock is not available this loopback is insufficient. This commit implements a workaround that leverages the fact that the MAC can reliably generate all of its necessary clocking by enterring the external GPHY RGMII interface mode with the UniMAC in local loopback during the sw_reset interval. Unfortunately, this has the undesirable side efect of the RGMII GTXCLK signal being driven during the same window. In most configurations this is a benign side effect as the signal is either not routed to a pin or is already expected to drive the pin. The one exception is when an external MII PHY is expected to drive the same pin with its TX_CLK output creating output driver contention. This commit exploits the IEEE 802.3 clause 22 standard defined isolate mode to force an external MII PHY to present a high impedance on its TX_CLK output during the window to prevent any contention at the pin. The MII interface is used internally with the 40nm internal EPHY which agressively disables its clocks for power savings leading to incomplete resets of the UniMAC and many instabilities observed over the years. The workaround of this commit is expected to put an end to those problems. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-06drm/atomic: fix self-refresh helpers crtc state dereferenceRob Clark2-8/+25
drm_self_refresh_helper_update_avg_times() was incorrectly accessing the new incoming state after drm_atomic_helper_commit_hw_done(). But this state might have already been superceeded by an !nonblock atomic update resulting in dereferencing an already free'd crtc_state. TODO I *think* this will more or less do the right thing.. althought I'm not 100% sure if, for example, we enter psr in a nonblock commit, and then leave psr in a !nonblock commit that overtakes the completion of the nonblock commit. Not sure if this sort of scenario can happen in practice. But not crashing is better than crashing, so I guess we should either take this patch or rever the self-refresh helpers until Sean can figure out a better solution. Fixes: d4da4e33341c ("drm: Measure Self Refresh Entry/Exit times to avoid thrashing") Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org> [seanpaul fixed up some checkpatch warns] Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191104173737.142558-1-robdclark@gmail.com
2019-11-05NFC: fdp: fix incorrect free objectPan Bian1-1/+1
The address of fw_vsc_cfg is on stack. Releasing it with devm_kfree() is incorrect, which may result in a system crash or other security impacts. The expected object to free is *fw_vsc_cfg. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05net: qualcomm: rmnet: Fix potential UAF when unregisteringSean Tranchetti1-2/+2
During the exit/unregistration process of the RmNet driver, the function rmnet_unregister_real_device() is called to handle freeing the driver's internal state and removing the RX handler on the underlying physical device. However, the order of operations this function performs is wrong and can lead to a use after free of the rmnet_port structure. Before calling netdev_rx_handler_unregister(), this port structure is freed with kfree(). If packets are received on any RmNet devices before synchronize_net() completes, they will attempt to use this already-freed port structure when processing the packet. As such, before cleaning up any other internal state, the RX handler must be unregistered in order to guarantee that no further packets will arrive on the device. Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by: Sean Tranchetti <stranche@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05mlx4_core: fix wrong comment about the reason of subtract one from the max_cqesDotan Barak1-2/+1
The reason for the pre-allocation of one CQE is to enable resizing of the CQ. Fix comment accordingly. Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.com> Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05net: dsa: bcm_sf2: Fix driver removalFlorian Fainelli1-2/+2
With the DSA core doing the call to dsa_port_disable() we do not need to do that within the driver itself. This could cause an use after free since past dsa_unregister_switch() we should not be accessing any dsa_switch internal structures. Fixes: 0394a63acfe2 ("net: dsa: enable and disable all ports") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05net: hns3: Use the correct style for SPDX License IdentifierNishad Kamdar7-7/+7
This patch corrects the SPDX License Identifier style in header files related to Hisilicon network devices. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05bonding: fix state transition issue in link monitoringJay Vosburgh1-22/+22
Since de77ecd4ef02 ("bonding: improve link-status update in mii-monitoring"), the bonding driver has utilized two separate variables to indicate the next link state a particular slave should transition to. Each is used to communicate to a different portion of the link state change commit logic; one to the bond_miimon_commit function itself, and another to the state transition logic. Unfortunately, the two variables can become unsynchronized, resulting in incorrect link state transitions within bonding. This can cause slaves to become stuck in an incorrect link state until a subsequent carrier state transition. The issue occurs when a special case in bond_slave_netdev_event sets slave->link directly to BOND_LINK_FAIL. On the next pass through bond_miimon_inspect after the slave goes carrier up, the BOND_LINK_FAIL case will set the proposed next state (link_new_state) to BOND_LINK_UP, but the new_link to BOND_LINK_DOWN. The setting of the final link state from new_link comes after that from link_new_state, and so the slave will end up incorrectly in _DOWN state. Resolve this by combining the two variables into one. Reported-by: Aleksei Zakharov <zakharov.a.g@yandex.ru> Reported-by: Sha Zhang <zhangsha.zhang@huawei.com> Cc: Mahesh Bandewar <maheshb@google.com> Fixes: de77ecd4ef02 ("bonding: improve link-status update in mii-monitoring") Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05Merge tag 'gpio-v5.4-4' of ↵Linus Torvalds1-20/+13
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "More GPIO fixes! We found a late regression in the Intel Merrifield driver. Oh well. We fixed it up. - Fix a build error in the tools used for kselftest - A series of reverts to bring the Intel Merrifield back to working. We will likely unrevert the reverts for v5.5 but we can't have v5.4 broken" * tag 'gpio-v5.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: Revert "gpio: merrifield: Pass irqchip when adding gpiochip" Revert "gpio: merrifield: Restore use of irq_base" Revert "gpio: merrifield: Move hardware initialization to callback" tools: gpio: Use !building_out_of_srctree to determine srctree
2019-11-05watchdog: bd70528: Add MODULE_ALIAS to allow module auto loadingMatti Vaittinen1-0/+1
The bd70528 watchdog driver is probed by MFD driver. Add MODULE_ALIAS in order to allow udev to load the module when MFD sub-device cell for watchdog is added. Fixes: bbc88a0ec9f37 ("watchdog: bd70528: Initial support for ROHM BD70528 watchdog block") Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-05watchdog: imx_sc_wdt: Pretimeout should follow SCU firmware formatAnson Huang1-1/+7
SCU firmware calculates pretimeout based on current time stamp instead of watchdog timeout stamp, need to convert the pretimeout to SCU firmware's timeout value. Fixes: 15f7d7fc5542 ("watchdog: imx_sc: Add pretimeout support") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-05watchdog: meson: Fix the wrong value of left timeXingyu Chen1-2/+2
The left time value is wrong when we get it by sysfs. The left time value should be equal to preset timeout value minus elapsed time value. According to the Meson-GXB/GXL datasheets which can be found at [0], the timeout value is saved to BIT[0-15] of the WATCHDOG_TCNT, and elapsed time value is saved to BIT[16-31] of the WATCHDOG_TCNT. [0]: http://linux-meson.com Fixes: 683fa50f0e18 ("watchdog: Add Meson GXBB Watchdog Driver") Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-05watchdog: pm8916_wdt: fix pretimeout registration flowJorge Ramirez-Ortiz1-4/+11
When an IRQ is present in the dts, the probe function shall fail if the interrupt can not be registered. The probe function shall also be retried if getting the irq is being deferred. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-05watchdog: cpwd: fix build regressionArnd Bergmann1-1/+7
The compat_ptr_ioctl() infrastructure did not make it into linux-5.4, so cpwd now fails to build. Fix it by using an open-coded version. Fixes: 68f28b01fb9e ("watchdog: cpwd: use generic compat_ptr_ioctl") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-06nvme-multipath: fix crash in nvme_mpath_clear_ctrl_pathsAnton Eidelman1-0/+2
nvme_mpath_clear_ctrl_paths() iterates through the ctrl->namespaces list while holding ctrl->scan_lock. This does not seem to be the correct way of protecting from concurrent list modification. Specifically, nvme_scan_work() sorts ctrl->namespaces AFTER unlocking scan_lock. This may result in the following (rare) crash in ctrl disconnect during scan_work: BUG: kernel NULL pointer dereference, address: 0000000000000050 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 3995 Comm: nvme 5.3.5-050305-generic RIP: 0010:nvme_mpath_clear_current_path+0xe/0x90 [nvme_core] ... Call Trace: nvme_mpath_clear_ctrl_paths+0x3c/0x70 [nvme_core] nvme_remove_namespaces+0x35/0xe0 [nvme_core] nvme_do_delete_ctrl+0x47/0x90 [nvme_core] nvme_sysfs_delete+0x49/0x60 [nvme_core] dev_attr_store+0x17/0x30 sysfs_kf_write+0x3e/0x50 kernfs_fop_write+0x11e/0x1a0 __vfs_write+0x1b/0x40 vfs_write+0xb9/0x1a0 ksys_write+0x67/0xe0 __x64_sys_write+0x1a/0x20 do_syscall_64+0x5a/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f8d02bfb154 Fix: After taking scan_lock in nvme_mpath_clear_ctrl_paths() down_read(&ctrl->namespaces_rwsem) as well to make list traversal safe. This will not cause deadlocks because taking scan_lock never happens while holding the namespaces_rwsem. Moreover, scan work downs namespaces_rwsem in the same order. Alternative: sort ctrl->namespaces in nvme_scan_work() while still holding the scan_lock. This would leave nvme_mpath_clear_ctrl_paths() without correct protection against ctrl->namespaces modification by anyone other than scan_work. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anton Eidelman <anton@lightbitslabs.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-11-06nvme-rdma: fix a segmentation fault during module unloadMax Gurtovoy1-0/+8
In case there are controllers that are not associated with any RDMA device (e.g. during unsuccessful reconnection) and the user will unload the module, these controllers will not be freed and will access already freed memory. The same logic appears in other fabric drivers as well. Fixes: 87fd125344d6 ("nvme-rdma: remove redundant reference between ib_device and tagset") Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-11-05can: mcp251x: mcp251x_restart_work_handler(): Fix potential force_quit race ↵Timo Schlüßler1-1/+1
condition In mcp251x_restart_work_handler() the variable to stop the interrupt handler (priv->force_quit) is reset after the chip is restarted and thus a interrupt might occur. This patch fixes the potential race condition by resetting force_quit before enabling interrupts. Signed-off-by: Timo Schlüßler <schluessler@krause.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04drm/i915/dp: Do not switch aux to TBT mode for non-TC portsJosé Roberto de Souza1-1/+5
Non-TC ports always have tc_mode == TC_PORT_TBT_ALT so it was switching aux to TBT mode for all combo-phy ports, happily this did not caused any issue but is better follow BSpec. Also this is reserved bit before ICL. Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Fixes: e9b7e1422d40 ("drm/i915: Sanitize the terminology used for TypeC port modes") Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191029011014.286885-1-jose.souza@intel.com (cherry picked from commit 49748264826ff4cc7f0ebbdd6b0d1a36b13b1cee) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-11-04drm/i915: Avoid HPD poll detect triggering a new detect cycleImre Deak3-0/+19
For the HPD interrupt functionality the HW depends on power wells in the display core domain to be on. Accordingly when enabling these power wells the HPD polling logic will force an HPD detection cycle to account for hotplug events that may have happened when such a power well was off. Thus a detect cycle started by polling could start a new detect cycle if a power well in the display core domain gets enabled during detect and stays enabled after detect completes. That in turn can lead to a detection cycle runaway. To prevent re-triggering a poll-detect cycle make sure we drop all power references we acquired during detect synchronously by the end of detect. This will let the poll-detect logic continue with polling (matching the off state of the corresponding power wells) instead of scheduling a new detection cycle. Fixes: 6cfe7ec02e85 ("drm/i915: Remove the unneeded AUX power ref from intel_dp_detect()") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112125 Reported-and-tested-by: Val Kulkov <val.kulkov@gmail.com> Reported-and-tested-by: wangqr <wqr.prg@gmail.com> Cc: Val Kulkov <val.kulkov@gmail.com> Cc: wangqr <wqr.prg@gmail.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191028181517.22602-1-imre.deak@intel.com (cherry picked from commit a8ddac7c9f06a12227a4f5febd1cbe0575a33179) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-11-04can: ti_hecc: add missing state changesJeroen Hofstee1-0/+17
While the ti_hecc has interrupts to report when the error counters increase to a certain level and which change state it doesn't handle the case that the error counters go down again, so the reported state can actually be wrong. Since there is no interrupt for that, do update state based on the error counters, when the state is not error active and goes down again. Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: ti_hecc: properly report state changesJeroen Hofstee1-74/+88
The HECC_CANES register handles the flags specially, it only updates the flags after a one is written to them. Since the interrupt for frame errors is not enabled an old error can hence been seen when a state interrupt arrives. For example if the device is not connected to the CAN-bus the error warning interrupt will have HECC_CANES indicating there is no ack. The error passive interrupt thereafter will have HECC_CANES flagging that there is a warning level. And if thereafter there is a message successfully send HECC_CANES points to an error passive event, while in reality it became error warning again. In summary, the state is not always reported correctly. So handle the state changes and frame errors separately. The state changes are now based on the interrupt flags and handled directly when they occur. The reporting of the frame errors is still done as before, as a side effect of another interrupt. note: the hecc_clear_bit will do a read, modify, write. So it will not only clear the bit, but also reset all other bits being set as a side affect, hence it is replaced with only clearing the flags. note: The HECC_CANMC_CCR is no longer cleared in the state change interrupt, it is completely unrelated. And use net_ratelimit to make checkpatch happy. Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: ti_hecc: add fifo overflow error reportingJeroen Hofstee1-5/+31
When the rx FIFO overflows the ti_hecc would silently drop them since the overwrite protection is enabled for all mailboxes. So disable it for the lowest priority mailbox and return a proper error value when receive message lost is set. Drop the message itself in that case, since it might be partially updated. Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com> Acked-by: Jeroen Hofstee <jhofstee@victronenergy.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: ti_hecc: release the mailbox a bit earlierJeroen Hofstee1-2/+3
Release the mailbox after reading it, so it can be reused a bit earlier. Since "can: rx-offload: continue on error" all pending message bits are cleared directly, so remove clearing them in ti_hecc. Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: ti_hecc: keep MIM and MD setJeroen Hofstee1-3/+3
The HECC_CANMIM is set in the xmit path and cleared in the interrupt. Since this is done with a read, modify, write action the register might end up with some more MIM enabled then intended, since it is not protected. That doesn't matter at all, since the tx interrupt disables the mailbox with HECC_CANME (while holding a spinlock). So lets just always keep MIM set. While at it, since the mailbox direction never changes, don't set it every time a message is send, ti_hecc_reset() already sets them to tx. Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: ti_hecc: ti_hecc_stop(): stop the CPK on downJeroen Hofstee1-0/+3
When the interface goes down, the CPK should no longer take an active part in the CAN-bus communication, like sending acks and error frames. So enable configuration mode in ti_hecc_stop, so the CPK is no longer active. When a transceiver switch is present the acks and errors don't make it to the bus, but disabling the CPK then does prevent oddities, like ti_hecc_reset() failing, since the CPK can become bus-off and starts counting the 11 bit recessive bits, which seems to block the reset. It can also cause invalid interrupts and disrupt the CAN-bus, since transmission can be stopped in the middle of a message, by disabling the tranceiver while the CPK is sending. Since the CPK is disabled after normal power on, it is typically only seen when the interface is restarted. Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: ti_hecc: ti_hecc_error(): increase error counters if skb enqueueing via ↵Marc Kleine-Budde1-1/+4
can_rx_offload_queue_sorted() fails The call to can_rx_offload_queue_sorted() may fail and return an error (in the current implementation due to resource shortage). The passed skb is consumed. This patch adds incrementing of the appropriate error counters to let the device statistics reflect that there's a problem. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: flexcan: increase error counters if skb enqueueing via ↵Marc Kleine-Budde1-2/+8
can_rx_offload_queue_sorted() fails The call to can_rx_offload_queue_sorted() may fail and return an error (in the current implementation due to resource shortage). The passed skb is consumed. This patch adds incrementing of the appropriate error counters to let the device statistics reflect that there's a problem. Reported-by: Martin Hundebøll <martin@geanix.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: rx-offload: can_rx_offload_irq_offload_fifo(): continue on errorMarc Kleine-Budde1-1/+3
In case of a resource shortage, i.e. the rx_offload queue will overflow or a skb fails to be allocated (due to OOM), can_rx_offload_offload_one() will call mailbox_read() to discard the mailbox and return an ERR_PTR. If the hardware FIFO is empty can_rx_offload_offload_one() will return NULL. In case a CAN frame was read from the hardware, can_rx_offload_offload_one() returns the skb containing it. Without this patch can_rx_offload_irq_offload_fifo() bails out if no skb returned, regardless of the reason. Similar to can_rx_offload_irq_offload_timestamp() in case of a resource shortage the whole FIFO should be discarded, to avoid an IRQ storm and give the system some time to recover. However if the FIFO is empty the loop can be left. With this patch the loop is left in case of empty FIFO, but not on errors. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: rx-offload: can_rx_offload_irq_offload_timestamp(): continue on errorJeroen Hofstee1-1/+1
In case of a resource shortage, i.e. the rx_offload queue will overflow or a skb fails to be allocated (due to OOM), can_rx_offload_offload_one() will call mailbox_read() to discard the mailbox and return an ERR_PTR. However can_rx_offload_irq_offload_timestamp() bails out in the error case. In case of a resource shortage all mailboxes should be discarded, to avoid an IRQ storm and give the system some time to recover. Since can_rx_offload_irq_offload_timestamp() is typically called from a while loop, all message will eventually be discarded. So let's continue on error instead to discard them directly. Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: rx-offload: can_rx_offload_offload_one(): use ERR_PTR() to propagate ↵Marc Kleine-Budde1-13/+73
error value in case of errors Before this patch can_rx_offload_offload_one() returns a pointer to a skb containing the read CAN frame or a NULL pointer. However the meaning of the NULL pointer is ambiguous, it can either mean the requested mailbox is empty or there was an error. This patch fixes this situation by returning: - pointer to skb on success - NULL pointer if mailbox is empty - ERR_PTR() in case of an error All users of can_rx_offload_offload_one() have been adopted, no functional change intended. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Powered by cgit, Gruvboxed by Blaster4385.