aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2012-02-10xhci: Fix oops caused by more USB2 ports than USB3 ports.Sarah Sharp1-1/+1
The code to set the device removable bits in the USB 2.0 roothub descriptor was accidentally looking at the USB 3.0 port registers instead of the USB 2.0 registers. This can cause an oops if there are more USB 2.0 registers than USB 3.0 registers. This should be backported to kernels as old as 2.6.39, that contain the commit 4bbb0ace9a3de8392527e3c87926309d541d3b00 "xhci: Return a USB 3.0 hub descriptor for USB3 roothub." Signed-off-by: Sarah Sharp <[email protected]> Cc: [email protected]
2012-02-10drm/i915: gen7: Disable the RHWO optimization as it can cause GPU hangs.Kenneth Graunke2-0/+7
The BSpec Workarounds page states that bits 10 and 26 must be set to avoid 3D ring hangs. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41353 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44610 Tested-by: Eugeni Dodonov <[email protected]> Signed-off-by: Kenneth Graunke <[email protected]> Signed-off-by: Jesse Barnes <[email protected]>
2012-02-10drm/i915: gen7: work around a system hang on IVBEugeni Dodonov2-0/+9
This adds the workaround for WaCatErrorRejectionIssue which could result in a system hang. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41353 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44610 Tested-by: Eugeni Dodonov <[email protected]> Reviewed-by: Kenneth Graunke <[email protected]> Signed-off-by: Eugeni Dodonov <[email protected]> Signed-off-by: Jesse Barnes <[email protected]>
2012-02-10drm/i915: gen7: Implement an L3 caching workaround.Eugeni Dodonov2-0/+13
This adds two cache-related workarounds for Ivy Bridge which can lead to 3D ring hangs and corruptions. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41353 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44610 Tested-by: Eugeni Dodonov <[email protected]> Signed-off-by: Eugeni Dodonov <[email protected]> Signed-off-by: Kenneth Graunke <[email protected]> Signed-off-by: Jesse Barnes <[email protected]>
2012-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds92-327/+386
Quoth David: 1) GRO MAC header comparisons were ethernet specific, breaking other link types. This required a multi-faceted fix to cure the originally noted case (Infiniband), because IPoIB was lying about it's actual hard header length. Thanks to Eric Dumazet, Roland Dreier, and others. 2) Fix build failure when INET_UDP_DIAG is built in and ipv6 is modular. From Anisse Astier. 3) Off by ones and other bug fixes in netprio_cgroup from Neil Horman. 4) ipv4 TCP reset generation needs to respect any network interface binding from the socket, otherwise route lookups might give a different result than all the other segments received. From Shawn Lu. 5) Fix unintended regression in ipv4 proxy ARP responses, from Thomas Graf. 6) Fix SKB under-allocation bug in sh_eth, from Yoshihiro Shimoda. 7) Revert skge PCI mapping changes that are causing crashes for some folks, from Stephen Hemminger. 8) IPV4 route lookups fill in the wildcarded fields of the given flow lookup key passed in, which is fine most of the time as this is exactly what the caller's want. However there are a few cases that want to retain the original flow key values afterwards, so handle those cases properly. Fix from Julian Anastasov. 9) IGB/IXGBE VF lookup bug fixes from Greg Rose. 10) Properly null terminate filename passed to ethtool flash device method, from Ben Hutchings. 11) S3 resume fix in via-velocity from David Lv. 12) Fix double SKB free during xmit failure in CAIF, from Dmitry Tarnyagin. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (72 commits) net: Don't proxy arp respond if iif == rt->dst.dev if private VLAN is disabled ipv4: Fix wrong order of ip_rt_get_source() and update iph->daddr. netprio_cgroup: fix wrong memory access when NETPRIO_CGROUP=m netprio_cgroup: don't allocate prio table when a device is registered netprio_cgroup: fix an off-by-one bug bna: fix error handling of bnad_get_flash_partition_by_offset() isdn: type bug in isdn_net_header() net: Make qdisc_skb_cb upper size bound explicit. ixgbe: ethtool: stats user buffer overrun ixgbe: dcb: up2tc mapping lost on disable/enable CEE DCB state ixgbe: do not update real num queues when netdev is going away ixgbe: Fix broken dependency on MAX_SKB_FRAGS being related to page size ixgbe: Fix case of Tx Hang in PF with 32 VFs ixgbe: fix vf lookup igb: fix vf lookup e1000: add dropped DMA receive enable back in for WoL gro: more generic L2 header check IPoIB: Stop lying about hard_header_len and use skb->cb to stash LL addresses zd1211rw: firmware needs duration_id set to zero for non-pspoll frames net: enable TC35815 for MIPS again ...
2012-02-10drm/i915: gen7: implement rczunit workaroundEugeni Dodonov2-0/+6
This is yet another workaround related to clock gating which we need on Ivy Bridge. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41353 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44610 Tested-by: Eugeni Dodonov <[email protected]> Signed-off-by: Eugeni Dodonov <[email protected]> Signed-off-by: Kenneth Graunke <[email protected]> Signed-off-by: Jesse Barnes <[email protected]>
2012-02-10PCI: Fix pci cardbus removalYinghai Lu1-6/+22
During test busn_res allocation with cardbus, found pci card removal is not working anymore, and it turns out it is broken by: |commit 79cc9601c3e42b4f0650fe7e69132ebce7ab48f9 |Date: Tue Nov 22 21:06:53 2011 -0800 | | PCI: Only call pci_stop_bus_device() one time for child devices at remove The above changed the behavior of pci_remove_behind_bridge that yenta_cardbus depended on. So restore the old behavoir of pci_remove_behind_bridge (which requires stopping and removing of all devices) by: 1. rename pci_remove_behind_bridge to __pci_remove_behind_bridge, and let __pci_remove_bus_device() call it instead. 2. add pci_stop_behind_bridge that will stop devices behind a bridge 3. add back pci_remove_behind_bridge that will stop and remove devices under bridge. -v2: update commit description a little bit. Tested-by: Dominik Brodowski <[email protected]> Signed-off-by: Yinghai Lu <[email protected]> Signed-off-by: Jesse Barnes <[email protected]>
2012-02-10PCI: set pci sriov page size before reading SRIOV BARVaidyanathan Srinivasan1-2/+1
For an SRIOV device, PCI_SRIOV_SYS_PGSIZE should be set before the PCI_SRIOV_BAR are queried. The sys pagesize defaults to 4k, so this change is required on powerpc box with 64k base page size. This is a regression caused due to moving SRIOV init to sriov_enable(). | commit afd24ece5c76af87f6fc477f2747b83a764f161c | Author: Ram Pai <[email protected]> | PCI: delay configuration of SRIOV capability | The SRIOV capability, namely page size and total_vfs of a device are | configured during enumeration phase of the device. This can potentially | interfere with the PCI operations of the platform, if the IOV capability | of the device is not enabled. Signed-off-by: Vaidyanathan Srinivasan <[email protected]> Acked-by: Ram Pai <[email protected]> Signed-off-by: Jesse Barnes <[email protected]>
2012-02-10PCI: workaround hard-wired bus number V2Yinghai Lu1-0/+5
Fixes PCI device detection on IBM xSeries IBM 3850 M2 / x3950 M2 when using ACPI resources (_CRS). This is default, a manual workaround (without this patch) would be pci=nocrs boot param. V2: Add dev_warn if the workaround is hit. This should reveal how common such setups are (via google) and point to possible problems if things are still not working as expected. -> Suggested by Jan Beulich. Cc: [email protected] Tested-by: [email protected] Signed-off-by: Yinghai Lu <[email protected]> Signed-off-by: Jesse Barnes <[email protected]>
2012-02-10Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds5-19/+21
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: fixup interlaced bits clearing in PIPECONF on PCH_SPLIT (v2) drm/i915: no lvds quirk for AOpen MP45 drm/i915: Force explicit bpp selection for intel_dp_link_required drm/radeon: do not continue after error from r600_ib_test drivers/gpu/drm/drm_ioc32.c: initialize all fields drm/i915: fixup interlaced bits clearing in PIPECONF on PCH_SPLIT drm/i915:: Disable FBC on SandyBridge
2012-02-10Merge tag 'hwmon-for-linus' of ↵Linus Torvalds2-11/+5
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Couple of regressions, couple of zero-day bugs, a minor enhancement. Nothing really major. * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (f75375s) Let f75375_update_device treat pwmX as a measured value hwmon: (f75375s) Fix bit shifting in f75375_write16 hwmon: (f75375s) Fix reading of wrong register when initializing the F75387 hwmon: (f75375s) Fix automatic pwm mode setting for F75373 & F75375 hwmon: (w83627ehf) Remove duplicate code
2012-02-10regulator: Fix getting voltage in max8649_enable_time()Axel Lin1-1/+1
Current code takes wrong parameter while calling max8649_list_voltage. Signed-off-by: Axel Lin <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-02-10Merge branch 'drm-intel-fixes' of ↵Dave Airlie3-18/+18
git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux into drm-fixes * 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux: drm/i915: fixup interlaced bits clearing in PIPECONF on PCH_SPLIT (v2) drm/i915: no lvds quirk for AOpen MP45 drm/i915: Force explicit bpp selection for intel_dp_link_required drm/i915: fixup interlaced bits clearing in PIPECONF on PCH_SPLIT drm/i915:: Disable FBC on SandyBridge
2012-02-09regulator: Fix mc13xxx regulator modular build (again)David Miller1-0/+2
Since mc13xxx-regulator-core.c and the actual drivers can get built into seperate modules, you have to export the DT support symbols "mc13xxx_get_num_regulators_dt" and "mc13xxx_parse_regulators_dt" otherwise the allmodconfig build fails on sparc64. [Updated the subject; the same thing was previously reported and fixed in -next but for some reason nobody noticed for some considerable time after the issue was introduced -- broonie] Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-02-09Merge tag 'tty-3.3-rc3' of ↵Linus Torvalds6-7/+28
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Serial/TTY fixes for the 3.3-rc3 tree Just a few new device ids, omap serial driver regression fixes, and a build fix for the 8250 driver movement. Signed-off-by: Greg Kroah-Hartman <[email protected]> * tag 'tty-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial: omap-serial: wakeup latency constraint is in microseconds, not milliseconds tty: serial: OMAP: block idle while the UART is transferring data in PIO mode tty: serial: OMAP: use a 1-byte RX FIFO threshold in PIO mode m32r: relocate drivers back out of 8250 dir tty: fix a build failure on sparc serial: samsung: Add support for EXYNOS5250 serial: samsung: Add support for EXYNOS4212 and EXYNOS4412 drivers/tty/vt/vt_ioctl.c: fix KDFONTOP 32bit compatibility layer
2012-02-09Merge tag 'staging-3.3-rc3' of ↵Linus Torvalds116-40542/+861
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Staging tree patches for 3.3-rc3 Big things here is the deletion of the Android pmem driver, as it's obsolete and no one uses it, the gma500 driver as it's already in the drm portion of the kernel tree, and the pohmelfs filesystem as it's obsolete and a rewritten version is being proposed for the fs/ section of the kernel. Other than that, a smattering of different bugfixes and regressions, and some omap drm api merge fixups that were needed due to api changes in the main portion of the drm tree, allowing this code to build properly again. Signed-off-by: Greg Kroah-Hartman <[email protected]> * tag 'staging-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (28 commits) staging: pohmelfs: remove drivers/staging/pohmelfs staging: android/ram_console: Don't build on arches w/o ioremap staging: r8712u: Use asynchronous firmware loading staging: usbip: fix to prevent potentially using uninitialized spinlock staging: r8712u: Fix problem when CONFIG_R8712_AP is set staging: tidspbridge: fix incorrect free to drv_datap staging: tidspbridge: fix bridge_open memory leaks staging: android: lowmemorykiller: Don't wait more than one second for a process to die MAINTAINERS: staging: iio: add iio information staging: zcache: fix serialization bug in zv stats staging: fix go7007-usb license Staging: android: binder: Fix crashes when sharing a binder file between processes Staging: android: Remove pmem driver Staging: asus_oled: fix NULL-ptr crash on unloading Staging: asus_oled: fix image processing Staging: android: binder: Don't call dump_stack in binder_vma_open staging: r8712u: Add new Sitecom UsB ID zcache: Set SWIZ_BITS to 8 to reduce tmem bucket lock contention. zcache: fix deadlock condition staging: drm/omap: fix locking issue ...
2012-02-09Merge tag 'driver-core-3.3-rc3' of ↵Linus Torvalds3-5/+55
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Driver core fixes for the 3.3-rc3 tree. A few fixes for kobject warnings that have popped up in the cpu hotplug path, and a regression fix for the speed of the hotplug memory code. Signed-off-by: Greg Kroah-Hartman <[email protected]> * tag 'driver-core-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver-core: cpu: fix kobject warning when hotplugging a cpu ACPI: remove duplicated lines of merging problems with acpi_processor_add docbook: fix fatal errors in device-drivers docbook and add DMA Management section drivers/base/memory.c: fix memory_dev_init() long delay driver core: cpu: remove kernel warning when removing a cpu
2012-02-09Merge tag 'char-misc-3.3-rc3' of ↵Linus Torvalds7-24/+13
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Minor char-misc fixes for 3.3-rc3 Nothing big here, some Kconfig fixes for the MISC_DEVICES config option that was being used incorrectly, and some other minor bug fixes. Signed-off-by: Greg Kroah-Hartman <[email protected]> * tag 'char-misc-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mmc: cb710 core: Add missing spin_lock_init for irq_lock of struct cb710_chip cs5535-mfgpt: don't call __init function from __devinit vmw_balloon: fix for a -Wuninitialized warning drivers: misc: Remove MISC_DEVICES config option c2port: fix build error for duramar2150 due to missing header.
2012-02-09Merge tag 'usb-3.3-rc3' of ↵Linus Torvalds11-12/+174
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb USB fixes for 3.3-rc3 Here are a few minor USB fixes and a bunch of device id updates for the USB drivers. Signed-off-by: Greg Kroah-Hartman <[email protected]> * tag 'usb-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: usbserial: add new PID number (0xa951) to the ftdi driver usb: ch9.h: usb_endpoint_maxp() uses __le16_to_cpu() usb: musb: fix a build error on mips uwb & wusb & usb wireless controllers: fix kconfig error & build errors usb: Skip PCI USB quirk handling for Netlogic XLP powerpc/usb: fix issue of CPU halt when missing USB PHY clock usb: otg: mv_otg: Add dependence usb: host: Distinguish Kconfig text for Freescale controllers USB: add new zte 3g-dongle's pid to option.c usb: ch9.h: usb_endpoint_maxp() uses __le16_to_cpu() USB: qcserial: don't enable autosuspend USB: qcserial: add several new serial devices usb: otg: mv_otg: Add dependence usb: gadget: zero: fix bug in loopback autoresume handling
2012-02-09bna: fix error handling of bnad_get_flash_partition_by_offset()Dan Carpenter1-6/+4
The current error handling doesn't work because we flash_part is a u32 so the checks for negative error codes don't work. I considered making things signed but I don't know the hardware enough to say if that's a problem. Really, we don't use the error codes so just returning zero for all problems is fine. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-09isdn: type bug in isdn_net_header()Dan Carpenter1-1/+1
We use len to store the return value from eth_header(). eth_header() can return -ETH_HLEN (-14). We want to pass this back instead of truncating it to 65522 and returning that. Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Neil Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-09rtlwifi: Modify rtl_pci_init to return 0 on successSimon Graham1-2/+2
Fixes problem where caller would think routine succeeded when it failed leading to divide by zero panic. Signed-off-by: Simon Graham <[email protected]> Acked-by: Larry Finger <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2012-02-09hwmon: (f75375s) Let f75375_update_device treat pwmX as a measured valueNikolaus Schulz1-3/+2
Treat pwmX as a measured value, not as a (mostly static) limit value, so that it is updated more frequently from the device register. Signed-off-by: Nikolaus Schulz <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2012-02-09tty: serial: omap-serial: wakeup latency constraint is in microseconds, not ↵Paul Walmsley1-2/+1
milliseconds The receive FIFO wakeup latency estimate in the omap-serial driver is three orders of magnitude too small. This effectively prevents the MPU from going to a low-power state when CONFIG_CPU_IDLE=y. This is a major power management regression and masks some other FIFO-related bugs in the driver. Fix by correcting the most egregious problem in the RX wakeup latency estimate. There are several other flaws in the estimator; these will be fixed by a separate patch series intended for 3.4. The difference in low-power states with this patch can be observed via debugfs in pm_debug/count. This estimate does not have any effect when CONFIG_CPU_IDLE=n. Signed-off-by: Paul Walmsley <[email protected]> Cc: Tomi Valkeinen <[email protected]> Cc: Alan Cox <[email protected]> Acked-by: Govindraj.R <[email protected]> Reviewed-by: Kevin Hilman <[email protected]> Tested-by: Kevin Hilman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-02-09tty: serial: OMAP: block idle while the UART is transferring data in PIO modePaul Walmsley1-0/+7
Prevent OMAP UARTs from going idle while they are still transferring data in PIO mode. This works around an oversight in the OMAP UART hardware present in OMAP34xx and earlier: an idle UART won't send a wakeup when the TX FIFO threshold is reached. This causes long delays during data transmission when the MPU powerdomain enters a low-power mode. The MPU interrupt controller is not able to respond to interrupts when it's in a low-power state, so the TX buffer is not refilled until another wakeup event occurs. This fix changes the erratum i291 DMA idle workaround. Rather than toggling between force-idle and no-idle, it will toggle between smart-idle and no-idle. The important part of the workaround is the no-idle part, so this shouldn't result in any change in behavior. This fix should work on all OMAP UARTs. Future patches intended for the 3.4 merge window will make this workaround conditional on a "feature" flag, and will use the OMAP36xx+ TX event wakeup support. Thanks to Kevin Hilman <[email protected]> for mentioning the erratum i291 workaround, which led to the development of this approach. Signed-off-by: Paul Walmsley <[email protected]> Cc: Alan Cox <[email protected]> Cc: Tomi Valkeinen <[email protected]> Acked-by: Govindraj.R <[email protected]> Reviewed-by: Kevin Hilman <[email protected]> Tested-by: Kevin Hilman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-02-09tty: serial: OMAP: use a 1-byte RX FIFO threshold in PIO modePaul Walmsley1-3/+17
In the (default) PIO mode, use a one-byte RX FIFO threshold. The OMAP UART IP blocks do not appear to be capable of waking the system under an RX timeout condition. Since the previous RX FIFO threshold was 16 bytes, this meant that omap-serial.c did not become aware of any received data until all those bytes arrived or until another UART interrupt occurred. This made the serial console and presumably other serial applications (GPS, serial Bluetooth) unusable or extremely slow. A 1-byte RX FIFO threshold also allows the MPU to enter a low-power consumption state while waiting for the FIFO to fill. This can be verified using the serial console by comparing the behavior when "0123456789abcde" is pasted in from another window, with the behavior when "0123456789abcdef" is pasted in. Since the former string is less than sixteen bytes long, the string is not echoed for some time, while the latter string is echoed immediately. DMA operation is unaffected by this patch. Thanks to Russell King - ARM Linux <[email protected]> for some additional information on the standard behavior of the RX timeout event, which was used to improve this commit description. Signed-off-by: Paul Walmsley <[email protected]> Cc: Tomi Valkeinen <[email protected]> Cc: Govindraj Raja <[email protected]> Cc: Alan Cox <[email protected]> Cc: Russell King <[email protected]> Reviewed-by: Kevin Hilman <[email protected]> Tested-by: Kevin Hilman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-02-09ARM: omap: fix broken twl-core dependencies and ifdefsRussell King2-3/+5
In commit aeb5032b3f, a dependency on IRQ_DOMAIN was added, which causes regressions on previously working setups: a previously working non-DT kernel configuration now loses its PMIC support. The lack of PMIC support in turn causes the loss of other functionality the kernel had. This dependency was added because the driver now registers its interrupts with the IRQ domain code, presumably to prevent a build error. The result is that OMAP3 oopses in the vp.c code (fixed by a previous commit) due to the lack of PMIC support. However, even with IRQ_DOMAIN enabled, the driver oopses: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] SMP Modules linked in: CPU: 1 Not tainted (3.3.0-rc2+ #271) PC is at irq_domain_add+0x1c/0x134 LR is at twl_probe+0xd0/0x370 pc : [<c007bad0>] lr : [<c029baac>] psr: 00000113 sp : df843c48 ip : df843c68 fp : df843c64 r10: c02b93e4 r9 : 00000000 r8 : c029b9dc r7 : df9d8a00 r6 : c03bef90 r5 : 00000000 r4 : c03f5240 r3 : 00000000 r2 : c03f5240 r1 : 00000015 r0 : c03f5240 Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 8000404a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xdf8422f0) Stack: (0xdf843c48 to 0xdf844000) 3c40: 00000014 00000170 00000014 c03bef90 df843c9c df843c68 3c60: c029baac c007bac0 00000000 df9d8a20 00000001 c03cd238 c02b93e4 df9d8a20 3c80: df9d8a04 df9d8a00 c029b9dc df8cae08 df843cc4 df843ca0 c01eee70 c029b9e8 ... Backtrace: [<c007bab4>] (irq_domain_add+0x0/0x134) from [<c029baac>] (twl_probe+0xd0/0x370) r6:c03bef90 r5:00000014 r4:00000170 [<c029b9dc>] (twl_probe+0x0/0x370) from [<c01eee70>] (i2c_device_probe+0xb0/0xe4) [<c01eedc0>] (i2c_device_probe+0x0/0xe4) from [<c01d1f34>] (really_probe+0xa0/0x178) r8:df8f0070 r7:c03cd238 r6:df9d8a20 r5:df9d8a20 r4:df9d8a20 [<c01d1e94>] (really_probe+0x0/0x178) from [<c01d205c>] (driver_probe_device+0x50/0x68) r7:df843d18 r6:df9d8a20 r5:c03cd238 r4:df9d8a20 [<c01d200c>] (driver_probe_device+0x0/0x68) from [<c01d2148>] (__device_attach+0x44/0x48) r5:df9d8a20 r4:c03cd238 [<c01d2104>] (__device_attach+0x0/0x48) from [<c01d0840>] (bus_for_each_drv+0x58/0x98) r5:c01d2104 r4:00000000 [<c01d07e8>] (bus_for_each_drv+0x0/0x98) from [<c01d21f8>] (device_attach+0x80/0xac) r7:df9d8a28 r6:df9d8a54 r5:c03cd978 r4:df9d8a20 [<c01d2178>] (device_attach+0x0/0xac) from [<c01d1430>] (bus_probe_device+0x34/0xa4) r6:df9d8a20 r5:c03cd978 r4:df9d8a20 [<c01d13fc>] (bus_probe_device+0x0/0xa4) from [<c01cffb0>] (device_add+0x2a0/0x420) r6:00000000 r5:df9d8a20 r4:df9d8a20 [<c01cfd10>] (device_add+0x0/0x420) from [<c01d0150>] (device_register+0x20/0x24) r8:df9d8a00 r7:df9d8a04 r6:df8f0048 r5:df9d8a00 r4:df9d8a20 [<c01d0130>] (device_register+0x0/0x24) from [<c01ef8d4>] (i2c_new_device+0x118/0x180) r4:df9d8a20 [<c01ef7bc>] (i2c_new_device+0x0/0x180) from [<c01efc88>] (i2c_register_adapter+0x140/0x204) r8:c03cd970 r7:00000000 r6:df8f0070 r5:df8a6300 r4:df8f0048 [<c01efb48>] (i2c_register_adapter+0x0/0x204) from [<c01efe9c>] (i2c_add_numbered_adapter+0xb4/0xcc) r8:df8a4c54 r7:df8cae00 r6:df843e2c r5:df8f0048 r4:00000000 [<c01efde8>] (i2c_add_numbered_adapter+0x0/0xcc) from [<c029ce1c>] (omap_i2c_probe+0x2f8/0x3b4) r6:00000000 r5:df8f0000 r4:df8f0070 [<c029cb24>] (omap_i2c_probe+0x0/0x3b4) from [<c01d3484>] (platform_drv_probe+0x20/0x24) [<c01d3464>] (platform_drv_probe+0x0/0x24) from [<c01d1f34>] (really_probe+0xa0/0x178) [<c01d1e94>] (really_probe+0x0/0x178) from [<c01d205c>] (driver_probe_device+0x50/0x68) r7:df843ef0 r6:c03cdb2c r5:c03cdb2c r4:df8cae08 [<c01d200c>] (driver_probe_device+0x0/0x68) from [<c01d20e0>] (__driver_attach+0x6c/0x90) r5:df8cae3c r4:df8cae08 [<c01d2074>] (__driver_attach+0x0/0x90) from [<c01d08d8>] (bus_for_each_dev+0x58/0x98) r6:c03cdb2c r5:c01d2074 r4:00000000 [<c01d0880>] (bus_for_each_dev+0x0/0x98) from [<c01d1d80>] (driver_attach+0x20/0x28) r7:df880b80 r6:c03cdb2c r5:c03cdb2c r4:c0394f28 [<c01d1d60>] (driver_attach+0x0/0x28) from [<c01d115c>] (bus_add_driver+0xb4/0x230) [<c01d10a8>] (bus_add_driver+0x0/0x230) from [<c01d278c>] (driver_register+0xc8/0x154) [<c01d26c4>] (driver_register+0x0/0x154) from [<c01d37e4>] (platform_driver_register+0x4c/0x60) r8:00000000 r7:00000013 r6:c00384c8 r5:c0395180 r4:c0394f28 [<c01d3798>] (platform_driver_register+0x0/0x60) from [<c038626c>] (omap_i2c_init_driver+0x14/0x1c) [<c0386258>] (omap_i2c_init_driver+0x0/0x1c) from [<c00087b8>] (do_one_initcall+0x9c/0x164) [<c000871c>] (do_one_initcall+0x0/0x164) from [<c036c2f4>] (kernel_init+0x90/0x138) [<c036c264>] (kernel_init+0x0/0x138) from [<c00384c8>] (do_exit+0x0/0x2ec) r5:c036c264 r4:00000000 <0>Code: e24dd004 e5903014 e1a04000 e5905010 (e5933000) <4>---[ end trace 1b75b31a2719ed1c ]--- This happens because we try to register an IRQ domain with a NULL ops structure, and the first thing irq_domain_add() does is try to dereference this ops structure. So, fix the problem by getting rid of the incorrect OF_IRQ ifdef and wrapping the IRQ domain bits of the driver with an IRQ_DOMAIN ifdef instead. Acked-by: Tony Lindgren <[email protected]> Signed-off-by: Russell King <[email protected]>
2012-02-09ARM: omap: fix oops in drivers/video/omap2/dss/dpi.cRussell King1-0/+5
When a PMIC is not found, this driver is unable to obtain its 'vdds_dsi_reg' regulator. Even through its initialization function fails, other code still calls its enable function, which fails to check whether it has this regulator before asking for it to be enabled. This fixes the oops, however a better fix would be to sort out the upper layers to prevent them calling into a module which failed to initialize. Unable to handle kernel NULL pointer dereference at virtual address 00000038 pgd = c0004000 [00000038] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT Modules linked in: CPU: 0 Not tainted (3.3.0-rc2+ #228) PC is at regulator_enable+0x10/0x70 LR is at omapdss_dpi_display_enable+0x54/0x15c pc : [<c01b9a08>] lr : [<c01af994>] psr: 60000013 sp : c181fd90 ip : c181fdb0 fp : c181fdac r10: c042eff0 r9 : 00000060 r8 : c044a164 r7 : c042c0e4 r6 : c042bd60 r5 : 00000000 r4 : c042bd60 r3 : c084de48 r2 : c181e000 r1 : c042bd60 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 80004019 DAC: 00000015 Process swapper (pid: 1, stack limit = 0xc181e2e8) Stack: (0xc181fd90 to 0xc1820000) fd80: c001754c c042bd60 00000000 c042bd60 fda0: c181fdcc c181fdb0 c01af994 c01b9a04 c0016104 c042bd60 c042bd60 c044a338 fdc0: c181fdec c181fdd0 c01b5ed0 c01af94c c042bd60 c042bd60 c1aa8000 c1aa8a0c fde0: c181fe04 c181fdf0 c01b5f54 c01b5ea8 c02fc18c c042bd60 c181fe3c c181fe08 fe00: c01b2a18 c01b5f48 c01aed14 c02fc160 c01df8ec 00000002 c042bd60 00000003 fe20: c042bd60 c1aa8000 c1aa8a0c c042eff8 c181fe84 c181fe40 c01b3874 c01b29fc fe40: c042eff8 00000000 c042f000 c0449db8 c044ed78 00000000 c181fe74 c042eff8 fe60: c042eff8 c0449db8 c0449db8 c044ed78 00000000 00000000 c181fe94 c181fe88 fe80: c01e452c c01b35e8 c181feb4 c181fe98 c01e2fdc c01e4518 c042eff8 c0449db8 fea0: c0449db8 c181fef0 c181fecc c181feb8 c01e3104 c01e2f48 c042eff8 c042f02c fec0: c181feec c181fed0 c01e3190 c01e30c0 c01e311c 00000000 c01e311c c0449db8 fee0: c181ff14 c181fef0 c01e1998 c01e3128 c18330a8 c1892290 c04165e8 c0449db8 ff00: c0449db8 c1ab60c0 c181ff24 c181ff18 c01e2e28 c01e194c c181ff54 c181ff28 ff20: c01e2218 c01e2e14 c039afed c181ff38 c04165e8 c041660c c0449db8 00000013 ff40: 00000000 c03ffdb8 c181ff7c c181ff58 c01e384c c01e217c c181ff7c c04165e8 ff60: c041660c c003a37c 00000013 00000000 c181ff8c c181ff80 c01e488c c01e3790 ff80: c181ff9c c181ff90 c03ffdcc c01e484c c181ffdc c181ffa0 c0008798 c03ffdc4 ffa0: c181ffc4 c181ffb0 c0056440 c0187810 c003a37c c04165e8 c041660c c003a37c ffc0: 00000013 00000000 00000000 00000000 c181fff4 c181ffe0 c03ea284 c0008708 ffe0: 00000000 c03ea208 00000000 c181fff8 c003a37c c03ea214 1073cec0 01f7ee08 Backtrace: [<c01b99f8>] (regulator_enable+0x0/0x70) from [<c01af994>] (omapdss_dpi_display_enable+0x54/0x15c) r6:c042bd60 r5:00000000 r4:c042bd60 [<c01af940>] (omapdss_dpi_display_enable+0x0/0x15c) from [<c01b5ed0>] (generic_dpi_panel_power_on+0x34/0x78) r6:c044a338 r5:c042bd60 r4:c042bd60 [<c01b5e9c>] (generic_dpi_panel_power_on+0x0/0x78) from [<c01b5f54>] (generic_dpi_panel_enable+0x18/0x28) r7:c1aa8a0c r6:c1aa8000 r5:c042bd60 r4:c042bd60 [<c01b5f3c>] (generic_dpi_panel_enable+0x0/0x28) from [<c01b2a18>] (omapfb_init_display+0x28/0x150) r4:c042bd60 [<c01b29f0>] (omapfb_init_display+0x0/0x150) from [<c01b3874>] (omapfb_probe+0x298/0x318) r8:c042eff8 r7:c1aa8a0c r6:c1aa8000 r5:c042bd60 r4:00000003 [<c01b35dc>] (omapfb_probe+0x0/0x318) from [<c01e452c>] (platform_drv_probe+0x20/0x24) [<c01e450c>] (platform_drv_probe+0x0/0x24) from [<c01e2fdc>] (really_probe+0xa0/0x178) [<c01e2f3c>] (really_probe+0x0/0x178) from [<c01e3104>] (driver_probe_device+0x50/0x68) r7:c181fef0 r6:c0449db8 r5:c0449db8 r4:c042eff8 [<c01e30b4>] (driver_probe_device+0x0/0x68) from [<c01e3190>] (__driver_attach+0x74/0x98) r5:c042f02c r4:c042eff8 [<c01e311c>] (__driver_attach+0x0/0x98) from [<c01e1998>] (bus_for_each_dev+0x58/0x98) r6:c0449db8 r5:c01e311c r4:00000000 [<c01e1940>] (bus_for_each_dev+0x0/0x98) from [<c01e2e28>] (driver_attach+0x20/0x28) r7:c1ab60c0 r6:c0449db8 r5:c0449db8 r4:c04165e8 [<c01e2e08>] (driver_attach+0x0/0x28) from [<c01e2218>] (bus_add_driver+0xa8/0x22c) [<c01e2170>] (bus_add_driver+0x0/0x22c) from [<c01e384c>] (driver_register+0xc8/0x154) [<c01e3784>] (driver_register+0x0/0x154) from [<c01e488c>] (platform_driver_register+0x4c/0x60) r8:00000000 r7:00000013 r6:c003a37c r5:c041660c r4:c04165e8 [<c01e4840>] (platform_driver_register+0x0/0x60) from [<c03ffdcc>] (omapfb_init+0x14/0x34) [<c03ffdb8>] (omapfb_init+0x0/0x34) from [<c0008798>] (do_one_initcall+0x9c/0x164) [<c00086fc>] (do_one_initcall+0x0/0x164) from [<c03ea284>] (kernel_init+0x7c/0x120) [<c03ea208>] (kernel_init+0x0/0x120) from [<c003a37c>] (do_exit+0x0/0x2d8) r5:c03ea208 r4:00000000 Code: e1a0c00d e92dd870 e24cb004 e24dd004 (e5906038) ---[ end trace 9e2474c2e193b223 ]--- Acked-by: Tony Lindgren <[email protected]> Signed-off-by: Russell King <[email protected]>
2012-02-09ixgbe: ethtool: stats user buffer overrunJohn Fastabend1-37/+51
If the number of tx/rx queues changes the ethtool ioctl ETHTOOL_GSTATS may overrun the userspace buffer. This occurs because the general practice in user space to query stats is to issue a ETHTOOL_GSSET cmd to learn the buffer size needed, allocate the buffer, then call ETHTOOL_GSTIRNGS and ETHTOOL_GSTATS. If the number of real_num_queues is changed or flow control attributes are changed after ETHTOOL_GSSET but before the ETHTOOL_GSTRINGS/ETHTOOL_GSTATS a user space buffer overrun occurs. To fix the overrun always return the max buffer size needed from get_sset_count() then return all strings and stats from get_strings()/get_ethtool_stats(). This _will_ change the output from the ioctl() call which could break applications and script parsing in theory. I believe these changes should not break existing tools because the only changes will be more {tx|rx}_queues and the {tx|rx}_pb_* stats will always be returned. Existing scripts already need to handle changing number of queues because this occurs today depending on system and current features. The {tx|rx}_pb_* stats are at the end of the output and should be handled by scripts today regardless. Finally get_ethtool_stats and get_strings are free-form outputs tools parsing these outputs should be defensive anyways. In the end these updates are better then having a tool segfault because of a buffer overrun. Signed-off-by: John Fastabend <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2012-02-09ixgbe: dcb: up2tc mapping lost on disable/enable CEE DCB stateJohn Fastabend1-2/+9
Users expect the up2tc mapping to be maintained across a DCB enable/disable/enable transition. And since we maintain all the other DCB attributes we should do this for up2tc mappings as well just to be consistent. Also without this we break user space applications that expect this to occur that previously worked. Signed-off-by: John Fastabend <[email protected]> Tested-by: Stephen Ko <[email protected]> Tested-by: Ross Brattain <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2012-02-09ixgbe: do not update real num queues when netdev is going awayYi Zou1-0/+4
If the netdev is already in NETREG_UNREGISTERING/_UNREGISTERED state, do not update the real num tx queues. netdev_queue_update_kobjects() is already called via remove_queue_kobjects() at NETREG_UNREGISTERING time. So, when upper layer driver, e.g., FCoE protocol stack is monitoring the netdev event of NETDEV_UNREGISTER and calls back to LLD ndo_fcoe_disable() to remove extra queues allocated for FCoE, the associated txq sysfs kobjects are already removed, and trying to update the real num queues would cause something like below: ... PID: 25138 TASK: ffff88021e64c440 CPU: 3 COMMAND: "kworker/3:3" #0 [ffff88021f007760] machine_kexec at ffffffff810226d9 #1 [ffff88021f0077d0] crash_kexec at ffffffff81089d2d #2 [ffff88021f0078a0] oops_end at ffffffff813bca78 #3 [ffff88021f0078d0] no_context at ffffffff81029e72 #4 [ffff88021f007920] __bad_area_nosemaphore at ffffffff8102a155 #5 [ffff88021f0079f0] bad_area_nosemaphore at ffffffff8102a23e #6 [ffff88021f007a00] do_page_fault at ffffffff813bf32e #7 [ffff88021f007b10] page_fault at ffffffff813bc045 [exception RIP: sysfs_find_dirent+17] RIP: ffffffff81178611 RSP: ffff88021f007bc0 RFLAGS: 00010246 RAX: ffff88021e64c440 RBX: ffffffff8156cc63 RCX: 0000000000000004 RDX: ffffffff8156cc63 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88021f007be0 R8: 0000000000000004 R9: 0000000000000008 R10: ffffffff816fed00 R11: 0000000000000004 R12: 0000000000000000 R13: ffffffff8156cc63 R14: 0000000000000000 R15: ffff8802222a0000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffff88021f007be8] sysfs_get_dirent at ffffffff81178c07 #9 [ffff88021f007c18] sysfs_remove_group at ffffffff8117ac27 #10 [ffff88021f007c48] netdev_queue_update_kobjects at ffffffff813178f9 #11 [ffff88021f007c88] netif_set_real_num_tx_queues at ffffffff81303e38 #12 [ffff88021f007cc8] ixgbe_set_num_queues at ffffffffa0249763 [ixgbe] #13 [ffff88021f007cf8] ixgbe_init_interrupt_scheme at ffffffffa024ea89 [ixgbe] #14 [ffff88021f007d48] ixgbe_fcoe_disable at ffffffffa0267113 [ixgbe] #15 [ffff88021f007d68] vlan_dev_fcoe_disable at ffffffffa014fef5 [8021q] #16 [ffff88021f007d78] fcoe_interface_cleanup at ffffffffa02b7dfd [fcoe] #17 [ffff88021f007df8] fcoe_destroy_work at ffffffffa02b7f08 [fcoe] #18 [ffff88021f007e18] process_one_work at ffffffff8105d7ca #19 [ffff88021f007e68] worker_thread at ffffffff81060513 #20 [ffff88021f007ee8] kthread at ffffffff810648b6 #21 [ffff88021f007f48] kernel_thread_helper at ffffffff813c40f4 Signed-off-by: Yi Zou <[email protected]> Tested-by: Ross Brattain <[email protected]> Tested-by: Stephen Ko <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2012-02-09ixgbe: Fix broken dependency on MAX_SKB_FRAGS being related to page sizeAlexander Duyck1-6/+6
This patch fixes an issue in which RSC will generate corrupted frames when PAGE_SIZE is larger than 8K. Specifically it looks like that in 2.6.39 a change was made so that GRO would always have at least 16 frags available for coalescing, but the ixgbe RSC logic was not updated. As such the RSC feature would generate a frame larger than 64K and then overflow the value in the IP length field. To correct that I am now basing things on the PAGE_SIZE. Signed-off-by: Alexander Duyck <[email protected]> Tested-by: Stephen Ko <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2012-02-09ixgbe: Fix case of Tx Hang in PF with 32 VFsGreg Rose1-1/+1
A check for the number of VFs allocated should have used a greater than equal operator instead of just greater than. This caused allocation of exactly 32 VFs to not enable the PF transmit and receive enables. Signed-off-by: Greg Rose <[email protected]> Tested-by: Robert E Garrett <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2012-02-09ixgbe: fix vf lookupGreg Rose1-1/+2
Recent addition of code to find already allocated VFs failed to take account that systems with 2 or more multi-port SR-IOV capable controllers might have already enabled VFs. Make sure that the VFs the function is finding are actually subordinate to the particular instance of the adapter that is looking for them and not subordinate to some device that has previously enabled SR-IOV. This bug exists in 3.2 stable as well as 3.3 release candidates. CC: [email protected] Reported-by: David Ahern <[email protected]> Signed-off-by: Greg Rose <[email protected]> Tested-by: Robert E Garrett <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2012-02-09igb: fix vf lookupGreg Rose1-1/+2
Recent addition of code to find already allocated VFs failed to take account that systems with 2 or more multi-port SR-IOV capable controllers might have already enabled VFs. Make sure that the VFs the function is finding are actually subordinate to the particular instance of the adapter that is looking for them and not subordinate to some device that has previously enabled SR-IOV. This is applicable to 3.2+ kernels. CC: [email protected] Reported-by: David Ahern <[email protected]> Signed-off-by: Greg Rose <[email protected]> Tested-by: Robert E Garrett <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2012-02-09e1000: add dropped DMA receive enable back in for WoLDean Nelson1-4/+6
Commit d5bc77a223b0e9b9dfb002048d2b34a79e7d0b48 broke Wake-on-LAN by inadvertently dropping the enabling of DMA receives. Restore the enabling of DMA receives for WoL. This is applicable to 3.1+ stable trees. CC: [email protected] Reported-by: Tobias Klausmann <[email protected]> Signed-off-by: Dean Nelson <[email protected]> Tested-by: Tobias Klausmann <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2012-02-09[media] omap3isp: Fix crash caused by subdevs now having a pointer to devnodesLaurent Pinchart1-1/+1
Commit 3e0ec41c5c5ee14e27f65e28d4a616de34f59a97 ("V4L: dynamically allocate video_device nodes in subdevices") makes the embedding video_device directly. Fix accesses to the devnode accordingly. Signed-off-by: Laurent Pinchart <[email protected]> Acked-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2012-02-08hwmon: (f75375s) Fix bit shifting in f75375_write16Nikolaus Schulz1-1/+1
In order to extract the high byte of the 16-bit word, shift the word to the right, not to the left. Signed-off-by: Nikolaus Schulz <[email protected]> Cc: [email protected] # 2.6.32+ Signed-off-by: Guenter Roeck <[email protected]>
2012-02-08hwmon: (f75375s) Fix reading of wrong register when initializing the F75387Nikolaus Schulz1-1/+1
Unlike the other chips supported by this driver, the F75387 stores the pwm_mode in register F75375_REG_FAN_TIMER, not F75375_REG_CONFIG1. Signed-off-by: Nikolaus Schulz <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2012-02-08hwmon: (f75375s) Fix automatic pwm mode setting for F75373 & F75375Nikolaus Schulz1-1/+1
In order to enable temperature mode aka automatic mode for the F75373 and F75375 chips, the two FANx_MODE bits in the fan configuration register need be set to 01, not 10. Signed-off-by: Nikolaus Schulz <[email protected]> Cc: [email protected] # 2.6.32+ Signed-off-by: Guenter Roeck <[email protected]>
2012-02-08hwmon: (w83627ehf) Remove duplicate codeGuenter Roeck1-5/+0
Commit ec3e5a16446fef1891611fe3bdfa5954d1ddf5e4 slipped in some duplicate code. Remove it. Signed-off-by: Guenter Roeck <[email protected]> Acked-by: Jean Delvare <[email protected]>
2012-02-08Merge branch 'iommu/fixes' of ↵Linus Torvalds2-6/+4
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu One patch fixes an bug in the ARM/MSM IOMMU code which returned sucess in the unmap function even when an error occured and the other patch adds a workaround into the AMD IOMMU driver to better handle broken IVRS ACPI tables (this patch fixes the case when a device is not listed in the table but actually translated by the iommu). * 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/msm: Fix error handling in msm_iommu_unmap() iommu/amd: Work around broken IVRS tables
2012-02-08Merge branch '3.3-rc-fixes' of ↵Linus Torvalds18-137/+262
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending This series contains pending target bug-fixes and cleanups for v3.3-rc3 that have been addressed the past weeks in lio-core.git. Some of the highlights include: - Fix handling for control CDBs with data greater than PAGE_SIZE (andy) - Use IP_FREEBIND for iscsi-target to address network portal creation issues with systemd (dax) - Allow PERSISTENT RESERVE IN for non-reservation holder (marco) - Fix iblock se_dev_attrib.unmap_granularity (marco) - Fix unsupported WRITE_SAME sense payload handling (martin) - Add workaround for zero-length control CDB handling (nab) - Fix discovery with INADDR_ANY and IN6ADDR_ANY_INIT (nab) - Fix target_submit_cmd() exception handling (nab) - Return correct ASC for unimplemented VPD pages (roland) - Don't zero pages used for data buffers (roland) - Fix return code of core_tpg_.*_lun (sebastian) * '3.3-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (26 commits) target: Fix unsupported WRITE_SAME sense payload iscsi: use IP_FREEBIND socket option iblock: fix handling of large requests target: handle empty string writes in sysfs iscsi_target: in_aton needs linux/inet.h target: Fix iblock se_dev_attrib.unmap_granularity target: Fix target_submit_cmd() exception handling target: Change target_submit_cmd() to return void target: accept REQUEST_SENSE with 18bytes target: Fail INQUIRY commands with EVPD==0 but PAGE CODE!=0 target: Return correct ASC for unimplemented VPD pages iscsi-target: Fix discovery with INADDR_ANY and IN6ADDR_ANY_INIT target: Allow control CDBs with data > 1 page iscsi-target: Fix up a few assignments iscsi-target: make one-bit bitfields unsigned iscsi-target: Fix double list_add with iscsit_alloc_buffs reject iscsi-target: Fix reject release handling in iscsit_free_cmd() target: fix return code of core_tpg_.*_lun target: use save/restore lock primitive in core_dec_lacl_count() target: avoid multiple outputs in scsi_dump_inquiry() ...
2012-02-08Merge tag 'md-3.3-fixes' of git://neil.brown.name/mdLinus Torvalds2-5/+12
Some simple md-related fixes. 1/ two small fixes to ensure we handle an interrupted resync properly. 2/ avoid loading the bitmap multiple times in dm-raid * tag 'md-3.3-fixes' of git://neil.brown.name/md: md: two small fixes to handling interrupt resync. Prevent DM RAID from loading bitmap twice.
2012-02-08Merge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2-4/+4
SPI bug fixes for v3.3-rc2 Minor SPI device driver changes. A rename of the pch_spi_pcidev symbol that merely eliminates a modpost warning, and a Kconfig change to allow the Samsung spi driver to build on EXYNOS. * tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6: spi-topcliff-pch: rename pch_spi_pcidev to pch_spi_pcidev_driver spi: Add spi-s3c64xx driver dependency on ARCH_EXYNOS4
2012-02-08pcmcia: fix socket refcount decrementing on each resumeRussell King1-3/+1
This fixes a memory-corrupting bug: not only does it cause the warning, but as a result of dropping the refcount to zero, it causes the pcmcia_socket0 device structure to be freed while it still has references, causing slab caches corruption. A fatal oops quickly follows this warning - often even just a 'dmesg' following the warning causes the kernel to oops. While testing suspend/resume on an ARM device with PCMCIA support, and a CF card inserted, I found that after five suspend and resumes, the kernel would complain, and shortly die after with slab corruption. WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50() As the message doesn't give a clue about which kobject, and the built-in debugging in drivers/base/power/main.c happens too late, this was added right before each get_device(): printk("%s: %p [%s] %u\n", __func__, dev, kobject_name(&dev->kobj), atomic_read(&dev->kobj.kref.refcount)); and on the 3rd s2ram cycle, the following behaviour observed: On the 3rd suspend/resume cycle: dpm_prepare: c1a0d998 [pcmcia_socket0] 3 dpm_suspend: c1a0d998 [pcmcia_socket0] 3 dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 3 dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 3 dpm_resume: c1a0d998 [pcmcia_socket0] 3 dpm_complete: c1a0d998 [pcmcia_socket0] 2 4th: dpm_prepare: c1a0d998 [pcmcia_socket0] 2 dpm_suspend: c1a0d998 [pcmcia_socket0] 2 dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 2 dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 2 dpm_resume: c1a0d998 [pcmcia_socket0] 2 dpm_complete: c1a0d998 [pcmcia_socket0] 1 5th: dpm_prepare: c1a0d998 [pcmcia_socket0] 1 dpm_suspend: c1a0d998 [pcmcia_socket0] 1 dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 1 dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 1 dpm_resume: c1a0d998 [pcmcia_socket0] 1 dpm_complete: c1a0d998 [pcmcia_socket0] 0 ------------[ cut here ]------------ WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50() Modules linked in: ucb1x00_core Backtrace: [<c0212090>] (dump_backtrace+0x0/0x110) from [<c04799dc>] (dump_stack+0x18/0x1c) [<c04799c4>] (dump_stack+0x0/0x1c) from [<c021cba0>] (warn_slowpath_common+0x50/0x68) [<c021cb50>] (warn_slowpath_common+0x0/0x68) from [<c021cbdc>] (warn_slowpath_null+0x24/0x28) [<c021cbb8>] (warn_slowpath_null+0x0/0x28) from [<c0335374>] (kobject_get+0x28/0x50) [<c033534c>] (kobject_get+0x0/0x50) from [<c03804f4>] (get_device+0x1c/0x24) [<c0388c90>] (dpm_complete+0x0/0x1a0) from [<c0389cc0>] (dpm_resume_end+0x1c/0x20) ... Looking at commit 7b24e7988263 ("pcmcia: split up central event handler"), the following change was made to cs.c: return 0; } #endif - - send_event(skt, CS_EVENT_PM_RESUME, CS_EVENT_PRI_LOW); + if (!(skt->state & SOCKET_CARDBUS) && (skt->callback)) + skt->callback->early_resume(skt); return 0; } And the corresponding change in ds.c is from: -static int ds_event(struct pcmcia_socket *skt, event_t event, int priority) -{ - struct pcmcia_socket *s = pcmcia_get_socket(skt); ... - switch (event) { ... - case CS_EVENT_PM_RESUME: - if (verify_cis_cache(skt) != 0) { - dev_dbg(&skt->dev, "cis mismatch - different card\n"); - /* first, remove the card */ - ds_event(skt, CS_EVENT_CARD_REMOVAL, CS_EVENT_PRI_HIGH); - mutex_lock(&s->ops_mutex); - destroy_cis_cache(skt); - kfree(skt->fake_cis); - skt->fake_cis = NULL; - s->functions = 0; - mutex_unlock(&s->ops_mutex); - /* now, add the new card */ - ds_event(skt, CS_EVENT_CARD_INSERTION, - CS_EVENT_PRI_LOW); - } - break; ... - } - pcmcia_put_socket(s); - return 0; -} /* ds_event */ to: +static int pcmcia_bus_early_resume(struct pcmcia_socket *skt) +{ + if (!verify_cis_cache(skt)) { + pcmcia_put_socket(skt); + return 0; + } + dev_dbg(&skt->dev, "cis mismatch - different card\n"); + /* first, remove the card */ + pcmcia_bus_remove(skt); + mutex_lock(&skt->ops_mutex); + destroy_cis_cache(skt); + kfree(skt->fake_cis); + skt->fake_cis = NULL; + skt->functions = 0; + mutex_unlock(&skt->ops_mutex); + /* now, add the new card */ + pcmcia_bus_add(skt); + return 0; +} As can be seen, the original function called pcmcia_get_socket() and pcmcia_put_socket() around the guts, whereas the replacement code calls pcmcia_put_socket() only in one path. This creates an imbalance in the refcounting. Testing with pcmcia_put_socket() put removed shows that the bug is gone: dpm_suspend: c1a10998 [pcmcia_socket0] 5 dpm_suspend_noirq: c1a10998 [pcmcia_socket0] 5 dpm_resume_noirq: c1a10998 [pcmcia_socket0] 5 dpm_resume: c1a10998 [pcmcia_socket0] 5 dpm_complete: c1a10998 [pcmcia_socket0] 5 Tested-by: Russell King <[email protected]> Signed-off-by: Russell King <[email protected]> Cc: Dominik Brodowski <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2012-02-08drivers/leds/leds-lm3530.c: fix setting pltfm->als_vmaxAxel Lin1-2/+2
In current code, pltfm->als_vmin is set to LM3530_ALS_WINDOW_mV and pltfm->als_vmax is 0. This does not make sense. I think what we want here is setting pltfm->als_vmax to LM3530_ALS_WINDOW_mV. Both als_vmin and als_vmax local variables will be set to pltfm->als_vmin and pltfm->als_vmax by a few lines latter. Thus also remove a redundant assignment for als_vmin and als_vmax in this patch. Signed-off-by: Axel Lin <[email protected]> Cc: Shreshtha Kumar Sahu <[email protected]> Acked-by: Milo(Woogyom) Kim <[email protected]> Tested-by: Milo(Woogyom) Kim <[email protected]> Cc: Richard Purdie <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2012-02-08staging: pohmelfs: remove drivers/staging/pohmelfsEvgeniy Polyakov14-7979/+0
New pohmelfs is coming, and it is time to remove deadly old design https://lkml.org/lkml/2012/2/8/293 Signed-off-by: Evgeniy Polyakov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-02-08Merge branch 'for-davem' of ↵David S. Miller9-16/+45
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-02-08IPoIB: Stop lying about hard_header_len and use skb->cb to stash LL addressesRoland Dreier3-47/+24
Commit a0417fa3a18a ("net: Make qdisc_skb_cb upper size bound explicit.") made it possible for a netdev driver to use skb->cb between its header_ops.create method and its .ndo_start_xmit method. Use this in ipoib_hard_header() to stash away the LL address (GID + QPN), instead of the "ipoib_pseudoheader" hack. This allows IPoIB to stop lying about its hard_header_len, which will let us fix the L2 check for GRO. Signed-off-by: Roland Dreier <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.