| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V fixes from Wei Liu:
- Some cosmetic changes for hv.c and balloon.c (Aditya Nagesh)
- Two documentation updates (Michael Kelley)
- Suppress the invalid warning for packed member alignment (Saurabh
Sengar)
- Two hv_balloon fixes (Michael Kelley)
* tag 'hyperv-fixes-signed-20240616' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: Cosmetic changes for hv.c and balloon.c
Documentation: hyperv: Improve synic and interrupt handling description
Documentation: hyperv: Update spelling and fix typo
tools: hv: suppress the invalid warning for packed member alignment
hv_balloon: Enable hot-add for memblock sizes > 128 MiB
hv_balloon: Use kernel macros to simplify open coded sequences
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Merge thermal driver fixes for 6.10-rc5 from Daniel Lezcano:
"- Remove the filtered mode for mt8188 as it is not supported on this
platform (Julien Panis)
- Fail in case the golden temperature is zero as that means the efuse
data is not correctly set (Julien Panis)"
* tag 'thermal-v6.10-rc4' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/mediatek/lvts_thermal: Return error in case of invalid efuse data
thermal/drivers/mediatek/lvts_thermal: Remove filtered mode for mt8188
|
|
VMWARE_HYPERCALL alternative will not work as intended without VMware guest code
initialization.
[ bp: note that this doesn't reproduce with newer gccs so it must be
something gcc-9-specific. ]
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Alexey Makhalov <[email protected]>
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
It's not possible to use the joiner at the same time with eDP MSO. When
a panel needs MSO, it's not optional, so MSO trumps joiner.
v3: Only change intel_dp_has_joiner(), leave debugfs alone (Ville)
Fixes: bc71194e8897 ("drm/i915/edp: enable eDP MSO during link training")
Cc: <[email protected]> # v5.13+
Cc: Ville Syrjala <[email protected]>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1668
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Jani Nikula <[email protected]>
(cherry picked from commit 8b5a92ca24eb96bb71e2a55e352687487d87687f)
Signed-off-by: Jani Nikula <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two fixes to correctly report i2c functionality, ensuring that
I2C_FUNC_SLAVE is reported when a device operates solely as a slave
interface"
* tag 'i2c-for-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: designware: Fix the functionality flags of the slave-only interface
i2c: at91: Fix the functionality flags of the slave-only interface
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 6.10-rc4.
Included in here are:
- thunderbolt debugfs bugfix
- USB typec bugfixes
- kcov usb bugfix
- xhci bugfixes
- usb-storage bugfix
- dt-bindings bugfix
- cdc-wdm log message spam bugfix
All of these, except for the last cdc-wdm log level change, have been
in linux-next for a while with no reported problems. The cdc-wdm
bugfix has been tested by syzbot and proved to fix the reported cpu
lockup issues when the log is constantly spammed by a broken device"
* tag 'usb-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: class: cdc-wdm: Fix CPU lockup caused by excessive log messages
xhci: Handle TD clearing for multiple streams case
xhci: Apply broken streams quirk to Etron EJ188 xHCI host
xhci: Apply reset resume quirk to Etron EJ188 xHCI host
xhci: Set correct transferred length for cancelled bulk transfers
usb-storage: alauda: Check whether the media is initialized
usb: typec: ucsi: Ack also failed Get Error commands
kcov, usb: disable interrupts in kcov_remote_start_usb_softirq
dt-bindings: usb: realtek,rts5411: Add missing "additionalProperties" on child nodes
usb: typec: tcpm: Ignore received Hard Reset in TOGGLING state
usb: typec: tcpm: fix use-after-free case in tcpm_register_source_caps
USB: xen-hcd: Traverse host/ when CONFIG_USB_XEN_HCD is selected
usb: typec: ucsi: glink: increase max ports for x1e80100
Revert "usb: chipidea: move ci_ulpi_init after the phy initialization"
thunderbolt: debugfs: Fix margin debugfs node creation condition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes that resolve som
reported problems. Included in here are:
- n_tty lookahead buffer bugfix
- WARN_ON() removal where it was not needed
- 8250_dw driver bugfixes
- 8250_pxa bugfix
- sc16is7xx Kconfig fixes for reported build issues
All of these have been in linux-next for over a week with no reported
problems"
* tag 'tty-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: drop debugging WARN_ON_ONCE() from uart_write()
serial: sc16is7xx: re-add Kconfig SPI or I2C dependency
serial: sc16is7xx: rename Kconfig CONFIG_SERIAL_SC16IS7XX_CORE
serial: port: Don't block system suspend even if bytes are left to xmit
serial: 8250_pxa: Configure tx_loadsz to match FIFO IRQ level
serial: 8250_dw: Revert "Move definitions to the shared header"
serial: 8250_dw: Don't use struct dw8250_data outside of 8250_dw
tty: n_tty: Fix buffer offsets when lookahead is used
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fix from Greg KH:
"Here is a single staging driver fix, for the vc04 driver. It resolves
a reported problem that showed up in the merge window set of changes.
It's been in linux-next for over a week with no reported problems"
* tag 'staging-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vchiq_debugfs: Fix NPD in vchiq_dump_state
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and sysfs fixes from Greg KH:
"Here are three small changes for 6.10-rc4 that resolve reported
problems, and finally drop an unused api call. These are:
- removal of devm_device_add_groups(), all the callers of this are
finally gone after the 6.10-rc1 merge (changes came in through
different trees), so it's safe to remove.
- much reported sysfs build error fixed up for systems that did not
have sysfs enabled
- driver core sync issue fix for a many reported issue over the years
that no one really paid much attention to, until Dirk finally
tracked down the real issue and made the "obviously correct and
simple" fix for it.
All of these have been in linux-next for over a week with no reported
problems"
* tag 'driver-core-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: core: synchronize really_probe() and dev_uevent()
sysfs: Unbreak the build around sysfs_bin_attr_simple_read()
driver core: remove devm_device_add_groups()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a number of small char/misc and iio driver fixes for
6.10-rc4. Included in here are the following:
- iio driver fixes for a bunch of reported problems.
- mei driver fixes for a number of reported issues.
- amiga parport driver build fix.
- .editorconfig fix that was causing lots of unintended whitespace
changes to happen to files when they were being edited. Unless we
want to sweep the whole tree and remove all trailing whitespace at
once, this is needed for the .editorconfig file to be able to be
used at all. This change is required because the original
submitters never touched older files in the tree.
- jfs bugfix for a buffer overflow
The jfs bugfix is in here as I didn't know where else to put it, and
it's been ignored for a while as the filesystem seems to be abandoned
and I'm tired of seeing the same issue reported in multiple places.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (25 commits)
.editorconfig: remove trim_trailing_whitespace option
jfs: xattr: fix buffer overflow for invalid xattr
misc: microchip: pci1xxxx: Fix a memory leak in the error handling of gp_aux_bus_probe()
misc: microchip: pci1xxxx: fix double free in the error handling of gp_aux_bus_probe()
parport: amiga: Mark driver struct with __refdata to prevent section mismatch
mei: vsc: Fix wrong invocation of ACPI SID method
mei: vsc: Don't stop/restart mei device during system suspend/resume
mei: me: release irq in mei_me_pci_resume error path
mei: demote client disconnect warning on suspend to debug
iio: inkern: fix channel read regression
iio: imu: inv_mpu6050: stabilized timestamping in interrupt
iio: adc: ad7173: Fix sampling frequency setting
iio: adc: ad7173: Clear append status bit
iio: imu: inv_icm42600: delete unneeded update watermark call
iio: imu: inv_icm42600: stabilized timestamp in interrupt
iio: invensense: fix odr switching to same value
iio: adc: ad7173: Remove index from temp channel
iio: adc: ad7173: Add ad7173_device_info names
iio: adc: ad7173: fix buffers enablement for ad7176-2
iio: temperature: mlx90635: Fix ERR_PTR dereference in mlx90635_probe()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
"Fix a bug where the SCSI Removable Media Bit (RMB) was incorrectly set
for hot-plug capable (and eSATA) ports.
The RMB bit means that the media is removable (e.g. floppy or CD-ROM),
not that the device server is removable. If the RMB bit is set, SCSI
will set the removable media sysfs attribute.
If the removable media sysfs attribute is set on a device,
GNOME/udisks will automatically mount the device on boot.
We only want to set the SCSI RMB bit (and thus the removable media
sysfs attribute) for devices where the ATA removable media device bit
is set"
* tag 'ata-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-scsi: Set the RMB bit only for removable media devices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Fix two issues with MI300 address translation logic
* tag 'edac_urgent_for_v6.10_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
RAS/AMD/ATL: Use system settings for MI300 DRAM to normalized address translation
RAS/AMD/ATL: Fix MI300 bank hash
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
- Update tracepoints events introduced in v6.10-rc1 so that it includes
the numeric identifier of host card in which the event happens
- replace wiki URL with the current website URL in Kconfig
* tag 'firewire-fixes-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: record card index in bus_reset_handle tracepoints event
firewire: core: record card index in tracepoinrts events derived from bus_reset_arrange_template
firewire: core: record card index in async_phy_inbound tracepoints event
firewire: core: record card index in async_phy_outbound_complete tracepoints event
firewire: core: record card index in async_phy_outbound_initiate tracepoints event
firewire: core: record card index in tracepoinrts events derived from async_inbound_template
firewire: core: record card index in tracepoinrts events derived from async_outbound_initiate_template
firewire: core: record card index in tracepoinrts events derived from async_outbound_complete_template
firewire: fix website URL in Kconfig
|
|
trigger the default trigger"
Commit 66601a29bb23 ("leds: class: If no default trigger is given, make
hw_control trigger the default trigger") causes ledtrig-netdev to get
set as default trigger on various network LEDs.
This causes users to hit a pre-existing AB-BA deadlock issue in
ledtrig-netdev between the LED-trigger locks and the rtnl mutex,
resulting in hung tasks in kernels >= 6.9.
Solving the deadlock is non trivial, so for now revert the change to
set the hw_control trigger as default trigger, so that ledtrig-netdev
no longer gets activated automatically for various network LEDs.
The netdev trigger is not needed because the network LEDs are usually under
hw-control and the netdev trigger tries to leave things that way so setting
it as the active trigger for the LED class device is a no-op.
Fixes: 66601a29bb23 ("leds: class: If no default trigger is given, make hw_control trigger the default trigger")
Reported-by: Genes Lists <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]/
Reported-by: Johannes Wüller <[email protected]>
Closes: https://lore.kernel.org/lkml/[email protected]/
Cc: [email protected]
Signed-off-by: Hans de Goede <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Acked-by: Lee Jones <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
translation
The currently used normalized address format is not applicable to all
MI300 systems. This leads to incorrect results during address
translation.
Drop the fixed layout and construct the normalized address from system
settings.
Fixes: 87a612375307 ("RAS/AMD/ATL: Add MI300 DRAM to normalized address translation support")
Signed-off-by: Yazen Ghannam <[email protected]>
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The logic in __efi_memmap_init() is shared between two different
execution flows:
- mapping the EFI memory map early or late into the kernel VA space, so
that its entries can be accessed;
- the x86 specific cloning of the EFI memory map in order to insert new
entries that are created as a result of making a memory reservation
via a call to efi_mem_reserve().
In the former case, the underlying memory containing the kernel's view
of the EFI memory map (which may be heavily modified by the kernel
itself on x86) is not modified at all, and the only thing that changes
is the virtual mapping of this memory, which is different between early
and late boot.
In the latter case, an entirely new allocation is created that carries a
new, updated version of the kernel's view of the EFI memory map. When
installing this new version, the old version will no longer be
referenced, and if the memory was allocated by the kernel, it will leak
unless it gets freed.
The logic that implements this freeing currently lives on the code path
that is shared between these two use cases, but it should only apply to
the latter. So move it to the correct spot.
While at it, drop the dummy definition for non-x86 architectures, as
that is no longer needed.
Cc: <[email protected]>
Fixes: f0ef6523475f ("efi: Fix efi_memmap_alloc() leaks")
Tested-by: Ashish Kalra <[email protected]>
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
The bus reset event occurs in the bus managed by one of 1394 OHCI
controller in Linux system, however the existing tracepoints events has
the lack of data about it to distinguish the issued hardware from the
others.
This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Sakamoto <[email protected]>
|
|
bus_reset_arrange_template
The asynchronous transmission of phy packet is initiated on one of 1394
OHCI controller, however the existing tracepoints events has the lack of
data about it.
This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Sakamoto <[email protected]>
|
|
The asynchronous transmission of phy packet is initiated on one of 1394
OHCI controller, however the existing tracepoints events has the lack of
data about it.
This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Sakamoto <[email protected]>
|
|
event
The asynchronous transmission of phy packet is initiated on one of 1394
OHCI controller, however the existing tracepoints events has the lack of
data about it.
This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Sakamoto <[email protected]>
|
|
event
The asynchronous transaction is initiated on one of 1394 OHCI
controller, however the existing tracepoints events has the lack of data
about it.
This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Sakamoto <[email protected]>
|
|
async_inbound_template
The asynchronous transaction is initiated on one of 1394 OHCI controller,
however the existing tracepoints events has the lack of data about it.
This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Sakamoto <[email protected]>
|
|
async_outbound_initiate_template
The asynchronous transaction is initiated on one of 1394 OHCI controller,
however the existing tracepoints events has the lack of data about it.
This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Sakamoto <[email protected]>
|
|
async_outbound_complete_template
The asynchronous transaction is initiated on one of 1394 OHCI controller,
however the existing tracepoints events has the lack of data about it.
This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Sakamoto <[email protected]>
|
|
The wiki in kernel.org is no longer updated. This commit replaces the
website URL with the latest one.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Sakamoto <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-06-11 (ice)
This series contains updates to ice driver only.
En-Wei Wu resolves IRQ collision during suspend.
Paul corrects 200Gbps speed being reported as unknown.
Wojciech adds retry mechanism when package download fails.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: implement AQ download pkg retry
ice: fix 200G link speed message log
ice: avoid IRQ collision to fix init failure on ACPI S3 resume
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes. Seems a little quieter than usual, but still a bunch of
stuff across the board. Mostly xe, some exynos and nouveau fixes.
core:
- Werror Kconfig fix
panel:
- add orientation quirk for Aya Neo KUN
- fix runtime warning on panel/bridge release
nouveau:
- remove unused struct
- fix wq crash on cards with no display
amdgpu:
- fix bo release clear page warning
xe:
- update MAINTAINERS
- Use correct forcewake assertions
- Assert that VRAM provisioning is only done on DGFX
- Flush render caches before user-fence signalling on all engines
- Move the disable_c6 call since it was sometimes never called
exynos:
- fix regression with fallback mode
- fix EDID related memory leak
- remove redundant code
komeda:
- fix debugfs conditional compilations
- check pointer error value
renesas:
- atomic shutdown fix
mediatek:
- atomic shutdown fix"
* tag 'drm-fixes-2024-06-15' of https://gitlab.freedesktop.org/drm/kernel:
arm/komeda: Remove all CONFIG_DEBUG_FS conditional compilations
drm/xe: move disable_c6 call
drm/xe: flush engine buffers before signalling user fence on all engines
drm/xe/pf: Assert LMEM provisioning is done only on DGFX
drm/xe/xe_gt_idle: use GT forcewake domain assertion
drm/mediatek: Call drm_atomic_helper_shutdown() at shutdown time
drm: renesas: shmobile: Call drm_atomic_helper_shutdown() at shutdown time
drm/nouveau: remove unused struct 'init_exec'
drm/nouveau: don't attempt to schedule hpd_work on headless cards
drm/amdgpu: Fix the BO release clear memory warning
drm/bridge/panel: Fix runtime warning on panel bridge release
drm/komeda: check for error-valued pointer
drm: panel-orientation-quirks: Add quirk for Aya Neo KUN
drm/exynos/vidi: fix memory leak in .get_modes()
drm/exynos: dp: drop driver owner initialization
drm/exynos: hdmi: report safe 640x480 mode as a fallback when no EDID found
drm: have config DRM_WERROR depend on !WERROR
MAINTAINERS: Update Xe driver maintainers
MAINTAINERS: update Xe driver maintainers
|
|
Pull VFIO fixes from Alex Williamson:
"Fix long standing lockdep issue of using remap_pfn_range() from the
vfio-pci fault handler for mapping device MMIO. Commit ba168b52bf8e
("mm: use rwsem assertion macros for mmap_lock") now exposes this as a
warning forcing this to be addressed.
remap_pfn_range() was used here to efficiently map the entire vma, but
it really never should have been used in the fault handler and doesn't
handle concurrency, which introduced complex locking. We also needed
to track vmas mapping the device memory in order to zap those vmas
when the memory is disabled resulting in a vma list.
Instead of all that mess, setup an address space on the device fd
such that we can use unmap_mapping_range() for zapping to avoid the
tracking overhead and use the standard vmf_insert_pfn() to insert
mappings on fault.
For now we'll iterate the vma and opportunistically try to insert
mappings for the entire vma. This aligns with typical use cases, but
hopefully in the future we can drop the iterative approach and make
use of huge_fault instead, once vmf_insert_pfn{pud,pmd}() learn to
handle pfnmaps"
* tag 'vfio-v6.10-rc4' of https://github.com/awilliam/linux-vfio:
vfio/pci: Insert full vma on mmap'd MMIO fault
vfio/pci: Use unmap_mapping_range()
vfio: Create vfio_fs_type with inode per device
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Discard double free on error conditions (Chunguang)
- Target Fixes (Daniel)
- Namespace detachment regression fix (Keith)
- Fix for an issue with flush requests and queuelist reuse (Chengming)
- nbd sparse annotation fixes (Christoph)
- unmap and free bio mapped data via submitter (Anuj)
- loop discard/fallocate unsupported fix (Cyril)
- Fix for the zoned write plugging added in this release (Damien)
- sed-opal wrong address fix (Su)
* tag 'block-6.10-20240614' of git://git.kernel.dk/linux:
loop: Disable fallocate() zero and discard if not supported
nvme: fix namespace removal list
nbd: Remove __force casts
nvmet: always initialize cqe.result
nvmet-passthru: propagate status from id override functions
nvme: avoid double free special payload
block: unmap and free user mapped integrity via submitter
block: fix request.queuelist usage in flush
block: Optimize disk zone resource cleanup
block: sed-opal: avoid possible wrong address reference in read_sed_opal_key()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three obvious driver fixes and two core fixes.
The two core fixes are to disable Command Duration Limits by default
to fix an inconsistency in SATA and some USB devices. The other is to
change the default read size for block zero to follow the device
preference (some USB bridges preferring 16 byte commands don't have a
translation for READ(10) and thus don't scan properly)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpi3mr: Fix ATA NCQ priority support
scsi: ufs: core: Quiesce request queues before checking pending cmds
scsi: core: Disable CDL by default
scsi: mpt3sas: Avoid test/set_bit() operating in non-allocated memory
scsi: sd: Use READ(16) when reading block zero on large capacity disks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fix from Joerg Roedel:
"A single patch that fixes a regression which several people reported:
- AMD-Vi: Fix regression causing panics"
* tag 'iommu-fix-v6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Fix panic accessing amd_iommu_enable_faulting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Restore the behavior of the no_turbo sysfs attribute in the
intel_pstate driver which allowed users to make the driver start using
turbo P-states if they have been enabled on the fly by the firmware
after OS initialization (Rafael Wysocki)"
* tag 'pm-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Check turbo_is_disabled() in store_no_turbo()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a recent regression in the ACPI EC driver and make system
suspend work on multiple platforms where StorageD3Enable _DSD is
missing in the ACPI tables.
Specifics:
- Make the ACPI EC driver directly evaluate an "orphan" _REG method
under the EC device, if present, which stopped being evaluated
after the driver had started to install its EC address space
handler at the root of the ACPI namespace (Rafael Wysocki)
- Make more devices put NVMe storage devices into D3 at suspend to
work around missing StorageD3Enable _DSD in the BIOS (Mario
Limonciello)"
* tag 'acpi-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Evaluate orphan _REG under EC device
ACPI: x86: Force StorageD3Enable on more products
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix three issues introduced recently, two related to defects in
ACPI tables supplied by the platform firmware and one cause by a
thermal core change that went too far:
- Prevent the thermal core from failing the registration of a cooling
device if its .get_cur_state() reports an incorrect state to start
with which may happen for fans handled through firmware-supplied
AML in ACPI tables (Rafael Wysocki)
- Make the ACPI thermal zone driver initialize all trip points with
temperature of 0 centigrade and below as invalid because such trip
point temperatures do not make sense on systems with ACPI thermal
control and they cause performance regressions due to permanent
thermal mitigations to occur (Rafael Wysocki)
- Restore passive polling management in the Step-Wise thermal
governor that uses it to ensure that all cooling devices used for
thermal mitigation will go back to their initial states eventually
(Rafael Wysocki)"
* tag 'thermal-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: gov_step_wise: Restore passive polling management
thermal: ACPI: Invalidate trip points with temperature of 0 or below
thermal: core: Do not fail cdev registration because of invalid initial state
|
|
It is reported that commit 5a5efdaffda5 ("thermal: core: Resume thermal
zones asynchronously") causes battery data in sysfs on Thinkpad P1 Gen2
to become invalid after a resume from S3 (and it is necessary to reboot
the machine to restore correct battery data). Some investigation into
the problem indicated that it happened because, after the commit in
question, the ACPI battery PM notifier ran in parallel with
thermal_zone_device_resume() for one of the thermal zones which
apparently confused the platform firmware on the affected system.
While the exact reason for the firmware confusion remains unclear, it
is arguably not particularly relevant, and the expected behavior of the
affected system can be restored by making the thermal PM notifier run
at the lowest priority which avoids interference between work items
spawned by it and the other PM notifiers (that will run before those
work items now).
Fixes: 5a5efdaffda5 ("thermal: core: Resume thermal zones asynchronously")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218881
Reported-by: [email protected]
Tested-by: [email protected]
Cc: 6.8+ <[email protected]> # 6.8+
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
After commit 5a5efdaffda5 ("thermal: core: Resume thermal zones
asynchronously") it is theoretically possible that, if a system suspend
starts immediately after a system resume, thermal_zone_device_resume()
spawned by the thermal PM notifier for one of the thermal zones at the
end of the system resume will run after the PM thermal notifier for the
suspend-prepare action. If that happens, tz->suspended set by the latter
will be reset by the former which may lead to unexpected consequences.
To avoid that race, synchronize thermal_zone_device_resume() with the
suspend-prepare thermal PM notifier with the help of additional bool
field and completion in struct thermal_zone_device.
Note that this also ensures running __thermal_zone_device_update() at
least once for each thermal zone between system resume and the following
system suspend in case it is needed to start thermal mitigation.
Fixes: 5a5efdaffda5 ("thermal: core: Resume thermal zones asynchronously")
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Various fixes:
* cfg80211: wext scan
* mac80211: monitor regression, scan counted_by, offload
* iwlwifi: locking, 6 GHz scan, remain-on-channel
* tag 'wireless-2024-06-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: fix monitor channel with chanctx emulation
wifi: mac80211: Avoid address calculations via out of bounds array indexing
wifi: mac80211: Recalc offload when monitor stop
wifi: iwlwifi: scan: correctly check if PSC listen period is needed
wifi: iwlwifi: mvm: fix ROC version check
wifi: iwlwifi: mvm: unlock mvm mutex
wifi: cfg80211: wext: add extra SIOCSIWSCAN data check
wifi: cfg80211: wext: set ssids=NULL for passive scans
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge amd-pstate driver updates for v6.11 from Mario Mario Limonciello:
"Add support for "Fast CPPC" which allows some CPUs to operate a tighter
loop for passive mode."
* tag 'amd-pstate-v6.11-2024-06-11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq: amd-pstate: change cpu freq transition delay for some models
x86/cpufeatures: Add AMD FAST CPPC feature flag
|
|
|
|
Merge a fix for a suspend issue related to storage handling on multiple
systems based on AMD hardware:
- Make more devices put NVMe storage devices into D3 at suspend to work
around missing StorageD3Enable _DSD in the BIOS (Mario Limonciello).
* branch acpi-x86:
ACPI: x86: Force StorageD3Enable on more products
|
|
If fallcate is implemented but zero and discard operations are not
supported by the filesystem the backing file is on we continue to fill
dmesg with errors from the blk_mq_end_request() since each time we call
fallocate() on the loop device the EOPNOTSUPP error from lo_fallocate()
ends up propagated into the block layer. In the end syscall succeeds
since the blkdev_issue_zeroout() falls back to writing zeroes which
makes the errors even more misleading and confusing.
How to reproduce:
1. make sure /tmp is mounted as tmpfs
2. dd if=/dev/zero of=/tmp/disk.img bs=1M count=100
3. losetup /dev/loop0 /tmp/disk.img
4. mkfs.ext2 /dev/loop0
5. dmesg |tail
[710690.898214] operation not supported error, dev loop0, sector 204672 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.898279] operation not supported error, dev loop0, sector 522 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.898603] operation not supported error, dev loop0, sector 16906 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.898917] operation not supported error, dev loop0, sector 32774 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.899218] operation not supported error, dev loop0, sector 49674 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.899484] operation not supported error, dev loop0, sector 65542 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.899743] operation not supported error, dev loop0, sector 82442 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.900015] operation not supported error, dev loop0, sector 98310 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.900276] operation not supported error, dev loop0, sector 115210 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.900546] operation not supported error, dev loop0, sector 131078 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
This patch changes the lo_fallocate() to clear the flags for zero and
discard operations if we get EOPNOTSUPP from the backing file fallocate
callback, that way we at least stop spewing errors after the first
unsuccessful try.
CC: Jan Kara <[email protected]>
Signed-off-by: Cyril Hrubis <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
The SCSI Removable Media Bit (RMB) should only be set for removable media,
where the device stays and the media changes, e.g. CD-ROM or floppy.
The ATA removable media device bit is obsoleted since ATA-8 ACS (2006),
but before that it was used to indicate that the device can have its media
removed (while the device stays).
Commit 8a3e33cf92c7 ("ata: ahci: find eSATA ports and flag them as
removable") introduced a change to set the RMB bit if the port has either
the eSATA bit or the hot-plug capable bit set. The reasoning was that the
author wanted his eSATA ports to get treated like a USB stick.
This is however wrong. See "20-082r23SPC-6: Removable Medium Bit
Expectations" which has since been integrated to SPC, which states that:
"""
Reports have been received that some USB Memory Stick device servers set
the removable medium (RMB) bit to one. The rub comes when the medium is
actually removed, because... The device server is removed concurrently
with the medium removal. If there is no device server, then there is no
device server that is waiting to have removable medium inserted.
Sufficient numbers of SCSI analysts see such a device:
- not as a device that supports removable medium;
but
- as a removable, hot pluggable device.
"""
The definition of the RMB bit in the SPC specification has since been
clarified to match this.
Thus, a USB stick should not have the RMB bit set (and neither shall an
eSATA nor a hot-plug capable port).
Commit dc8b4afc4a04 ("ata: ahci: don't mark HotPlugCapable Ports as
external/removable") then changed so that the RMB bit is only set for the
eSATA bit (and not for the hot-plug capable bit), because of a lot of bug
reports of SATA devices were being automounted by udisks. However,
treating eSATA and hot-plug capable ports differently is not correct.
From the AHCI 1.3.1 spec:
Hot Plug Capable Port (HPCP): When set to '1', indicates that this port's
signal and power connectors are externally accessible via a joint signal
and power connector for blindmate device hot plug.
So a hot-plug capable port is an external port, just like commit
45b96d65ec68 ("ata: ahci: a hotplug capable port is an external port")
claims.
In order to not violate the SPC specification, modify the SCSI INQUIRY
data to only set the RMB bit if the ATA device can have its media removed.
This fixes a reported problem where GNOME/udisks was automounting devices
connected to hot-plug capable ports.
Fixes: 45b96d65ec68 ("ata: ahci: a hotplug capable port is an external port")
Cc: [email protected]
Reviewed-by: Mario Limonciello <[email protected]>
Reviewed-by: Thomas Weißschuh <[email protected]>
Tested-by: Thomas Weißschuh <[email protected]>
Reported-by: Thomas Weißschuh <[email protected]>
Closes: https://lore.kernel.org/linux-ide/[email protected]/
Signed-off-by: Damien Le Moal <[email protected]>
[cassel: wrote commit message]
Signed-off-by: Niklas Cassel <[email protected]>
|
|
Roll -rc3 and current drm/fixes in.
This will also unstuck our for-next branch.
Signed-off-by: Maxime Ripard <[email protected]>
|
|
While we list the "IRQ status *and acknowledge*" registers as volatile
in the MFD description, they are missing from the writable range array,
so acknowledging any interrupts was met with an -EIO error.
This error propagates up, leading to the whole AXP717 driver failing to
probe, which is fatal to most systems using this PMIC, since most
peripherals refer one of the PMIC voltage rails.
This wasn't noticed on the initial submission, since the interrupt was
completely missing at this point, but the DTs now merged describe the
interrupt, creating the problem.
Add the five registers that hold those bits to the writable array.
This fixes the boot on the Anbernic systems using the AXP717 PMIC.
Fixes: b5bfc8ab2484 ("mfd: axp20x: Add support for AXP717 PMIC")
Reported-by: Chris Morgan <[email protected]>
Signed-off-by: Andre Przywara <[email protected]>
Reviewed-by: John Watts <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Since the debugfs functions have no-op stubs for CONFIG_DEBUG_FS=n,
the compiler will optimize the rest away since they are no longer referenced.
The benefit of removing the conditional compilation is that the build
is actually tested for both CONFIG_DEBUG_FS configuration values.
Assuming most developers have it enabled, CONFIG_DEBUG_FS=n is not tested
much and may fail the build due to the conditional compilation.
Reported-by: k2ci <[email protected]>
Signed-off-by: pengfuyuan <[email protected]>
Acked-by: Liviu Dudau <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Liviu Dudau <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
|
|
The syzbot fuzzer found that the interrupt-URB completion callback in
the cdc-wdm driver was taking too long, and the driver's immediate
resubmission of interrupt URBs with -EPROTO status combined with the
dummy-hcd emulation to cause a CPU lockup:
cdc_wdm 1-1:1.0: nonzero urb status received: -71
cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes
watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625]
CPU#0 Utilization every 4s during lockup:
#1: 98% system, 0% softirq, 3% hardirq, 0% idle
#2: 98% system, 0% softirq, 3% hardirq, 0% idle
#3: 98% system, 0% softirq, 3% hardirq, 0% idle
#4: 98% system, 0% softirq, 3% hardirq, 0% idle
#5: 98% system, 1% softirq, 3% hardirq, 0% idle
Modules linked in:
irq event stamp: 73096
hardirqs last enabled at (73095): [<ffff80008037bc00>] console_emit_next_record kernel/printk/printk.c:2935 [inline]
hardirqs last enabled at (73095): [<ffff80008037bc00>] console_flush_all+0x650/0xb74 kernel/printk/printk.c:2994
hardirqs last disabled at (73096): [<ffff80008af10b00>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline]
hardirqs last disabled at (73096): [<ffff80008af10b00>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551
softirqs last enabled at (73048): [<ffff8000801ea530>] softirq_handle_end kernel/softirq.c:400 [inline]
softirqs last enabled at (73048): [<ffff8000801ea530>] handle_softirqs+0xa60/0xc34 kernel/softirq.c:582
softirqs last disabled at (73043): [<ffff800080020de8>] __do_softirq+0x14/0x20 kernel/softirq.c:588
CPU: 0 PID: 6625 Comm: syz-executor782 Tainted: G W 6.10.0-rc2-syzkaller-g8867bbd4a056 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
Testing showed that the problem did not occur if the two error
messages -- the first two lines above -- were removed; apparently adding
material to the kernel log takes a surprisingly large amount of time.
In any case, the best approach for preventing these lockups and to
avoid spamming the log with thousands of error messages per second is
to ratelimit the two dev_err() calls. Therefore we replace them with
dev_err_ratelimited().
Signed-off-by: Alan Stern <[email protected]>
Suggested-by: Greg KH <[email protected]>
Reported-and-tested-by: [email protected]
Closes: https://lore.kernel.org/linux-usb/[email protected]/
Reported-and-tested-by: [email protected]
Closes: https://lore.kernel.org/linux-usb/[email protected]/
Fixes: 9908a32e94de ("USB: remove err() macro from usb class drivers")
Link: https://lore.kernel.org/linux-usb/[email protected]/
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Core Changes:
- Xe Maintainers update to MAINTAINERS file.
Driver Changes:
- Use correct forcewake assertions.
- Assert that VRAM provisioning is only done on DGFX.
- Flush render caches before user-fence signalling on all engines.
- Move the disable_c6 call since it was sometimes never called.
Signed-off-by: Dave Airlie <[email protected]>
From: Thomas Hellstrom <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/ZmrXV0FoBb8M0c6J@fedora
|
|
USB/UAS devices
Recently it was reported that the following USB storage devices are
unusable with Linux kernel 6.9:
* Kingston DataTraveler G2
* Garmin FR35
This is because attempting to read the IO Advice Hints Grouping mode page
causes these devices to reset. Hence do not read the IO Advice Hints
Grouping mode page from USB/UAS storage devices.
Acked-by: Alan Stern <[email protected]>
Cc: [email protected]
Fixes: 4f53138fffc2 ("scsi: sd: Translate data lifetime information")
Reported-by: Joao Machado <[email protected]>
Closes: https://lore.kernel.org/linux-scsi/[email protected]/T/#mf4e3410d8f210454d7e4c3d1fb5c0f41e651b85f
Tested-by: Andy Shevchenko <[email protected]>
Bisected-by: Christian Heusel <[email protected]>
Reported-by: Andy Shevchenko <[email protected]>
Closes: https://lore.kernel.org/linux-scsi/CACLx9VdpUanftfPo2jVAqXdcWe8Y43MsDeZmMPooTzVaVJAh2w@mail.gmail.com/
Signed-off-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Prepare for skipping the IO Advice Hints Grouping mode page for USB storage
devices.
Cc: Alan Stern <[email protected]>
Cc: Joao Machado <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Christian Heusel <[email protected]>
Cc: [email protected]
Fixes: 4f53138fffc2 ("scsi: sd: Translate data lifetime information")
Signed-off-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Under the conditions that a device is to be reinitialized within
ufshcd_probe_hba(), the device must first be fully reset.
Resetting the device should include freeing U8 model (member of dev_info)
but does not, and this causes a memory leak. ufs_put_device_desc() is
responsible for freeing model.
unreferenced object 0xffff3f63008bee60 (size 32):
comm "kworker/u33:1", pid 60, jiffies 4294892642
hex dump (first 32 bytes):
54 48 47 4a 46 47 54 30 54 32 35 42 41 5a 5a 41 THGJFGT0T25BAZZA
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc ed7ff1a9):
[<ffffb86705f1243c>] kmemleak_alloc+0x34/0x40
[<ffffb8670511cee4>] __kmalloc_noprof+0x1e4/0x2fc
[<ffffb86705c247fc>] ufshcd_read_string_desc+0x94/0x190
[<ffffb86705c26854>] ufshcd_device_init+0x480/0xdf8
[<ffffb86705c27b68>] ufshcd_probe_hba+0x3c/0x404
[<ffffb86705c29264>] ufshcd_async_scan+0x40/0x370
[<ffffb86704f43e9c>] async_run_entry_fn+0x34/0xe0
[<ffffb86704f34638>] process_one_work+0x154/0x298
[<ffffb86704f34a74>] worker_thread+0x2f8/0x408
[<ffffb86704f3cfa4>] kthread+0x114/0x118
[<ffffb86704e955a0>] ret_from_fork+0x10/0x20
Fixes: 96a7141da332 ("scsi: ufs: core: Add support for reinitializing the UFS device")
Cc: <[email protected]>
Reviewed-by: Andrew Halaney <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Joel Slebodnick <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|