| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
For some SMU13.0.0 SKUs, the vbios carried pptable is ready to go.
Use that one instead of hardcoded softpptable.
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Kenneth Feng <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[why]
fw version check was for release branch.
for staging, it has a chance to enter wrong code path.
Reviewed-by: Hansen Dsouza <[email protected]>
Acked-by: Brian Chang <[email protected]>
Signed-off-by: Charlene Liu <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why&How]
When calculating allocation for cursor size, get the real cursor through
the HUBP instead of using the maximum cursor size for more optimal
allocation
Reviewed-by: Alvin Lee <[email protected]>
Reviewed-by: Nicholas Kazlauskas <[email protected]>
Acked-by: Brian Chang <[email protected]>
Signed-off-by: Aurabindo Pillai <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why&How]
When using a 4k monitor when cursor caching is not supported due to
framebuffer being on an uncacheable address, enabling display refresh
from MALL would trigger corruption if SS is enabled.
Prevent entering SS if we are on the edge case and cursor caching is not
possible. Do this only if cursor size larger than a 64x64@4bpp. Pull the
cursor size calculation out of if condition since cursor address may not
be set on all platforms
Reviewed-by: Alvin Lee <[email protected]>
Reviewed-by: Nicholas Kazlauskas <[email protected]>
Acked-by: Brian Chang <[email protected]>
Signed-off-by: Aurabindo Pillai <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
For calculating cursor size allocation, surface size was used, resulting
in over allocation
Reviewed-by: Alvin Lee <[email protected]>
Reviewed-by: Nicholas Kazlauskas <[email protected]>
Acked-by: Brian Chang <[email protected]>
Signed-off-by: Aurabindo Pillai <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why & How]
Number of encoder is set to 4 but only 3 instances are created.
Reviewed-by: Charlene Liu <[email protected]>
Acked-by: Brian Chang <[email protected]>
Signed-off-by: Leo Chen <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
DIG_FIFO_ERROR = 1 caused mst daisy chain 2nd monitor black.
[How]
We need to set dig fifo read start level = 7 before dig fifo reset during dig
fifo enable according to hardware designer's suggestion. If it is zero, it will
cause underflow or overflow and DIG_FIFO_ERROR = 1.
Reviewed-by: Alvin Lee <[email protected]>
Reviewed-by: Aric Cyr <[email protected]>
Acked-by: Brian Chang <[email protected]>
Signed-off-by: Wang Fudong <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
In amdgpu_cs_ioctl, amdgpu_job_free could be performed ealier if there
is -ERESTARTSYS error. In this case, job->hw_fence could be not
initialized yet. Putting hw_fence during amdgpu_job_free could lead to a
use-after-free warning.
[How]
Check if drm_sched_job_init is performed before job_free by checking
s_fence.
v2: Check hw_fence.ops instead since it could be NULL if fence is not
initialized. Reverse the condition since !=NULL check is discouraged in
kernel.
Signed-off-by: YuBiao Wang <[email protected]>
Reviewed-by: Andrey Grodzovsky <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
When ODM is enabled, H timing control register reset
to 0. Div mode manual field get overwritten causing
no display on certain modes for dcn314.
[How]
Use REG_UPDATE instead of REG_SET to set div_mode
field.
Reviewed-by: Charlene Liu <[email protected]>
Reviewed-by: Nicholas Kazlauskas <[email protected]>
Acked-by: Brian Chang <[email protected]>
Signed-off-by: Duncan Ma <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Each index in the DPSTREAMCLK_CNTL register
phyiscally maps 1-to-1 with HPO stream encoder
instance. On the other hand, each index in
DTBCLK_P_CNTL physically maps 1-to-1 with OTG
instance.
Current DCN32 DPSTREAMCLK_CLK programing assumes
that OTG instance always maps 1-to-1 with
HPO stream encoder instance. This is not always
guaranteed and can result in blackscreen.
[How]
Program the correct dpstreamclk instance with
the correct dtbclk_p source.
Reviewed-by: Ariel Bernstein <[email protected]>
Acked-by: Brian Chang <[email protected]>
Signed-off-by: George Shen <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
New GFX11 MES FW adds the trap_en bit. For now hardcode to 1 (traps
enabled).
Signed-off-by: Graham Sider <[email protected]>
Acked-by: Felix Kuehling <[email protected]>
Reviewed-by: Harish Kasiviswanathan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Below driver load error will be printed, not friendly to end user.
amdgpu: ATOM BIOS: 113-D603GLXE-077
[drm] FRU: Failed to get size field
[drm:amdgpu_fru_get_product_info [amdgpu]] *ERROR* Failed to read FRU Manufacturer, ret:-5
Signed-off-by: Guchun Chen <[email protected]>
Reviewed-by: Kent Russell <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more hotfixes from Andrew Morton:
"Seventeen hotfixes. Mostly memory management things.
Ten patches are cc:stable, addressing pre-6.0 issues"
* tag 'mm-hotfixes-stable-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
.mailmap: update Luca Ceresoli's e-mail address
mm/mprotect: only reference swap pfn page if type match
squashfs: don't call kmalloc in decompressors
mm/damon/dbgfs: avoid duplicate context directory creation
mailmap: update email address for Colin King
asm-generic: sections: refactor memory_intersects
bootmem: remove the vmemmap pages from kmemleak in put_page_bootmem
ocfs2: fix freeing uninitialized resource on ocfs2_dlm_shutdown
Revert "memcg: cleanup racy sum avoidance code"
mm/zsmalloc: do not attempt to free IS_ERR handle
binder_alloc: add missing mmap_lock calls when using the VMA
mm: re-allow pinning of zero pfns (again)
vmcoreinfo: add kallsyms_num_syms symbol
mailmap: update Guilherme G. Piccoli's email addresses
writeback: avoid use-after-free after removing device
shmem: update folio if shmem_replace_page() updates the page
mm/hugetlb: avoid corrupting page->mapping in hugetlb_mcopy_atomic_pte
|
|
Take the mmap_read_lock() when using the VMA in binder_alloc_print_pages()
and when checking for a VMA in binder_alloc_new_buf_locked().
It is worth noting binder_alloc_new_buf_locked() drops the VMA read lock
after it verifies a VMA exists, but may be taken again deeper in the call
stack, if necessary.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: a43cfc87caaf (android: binder: stop saving a pointer to the VMA)
Signed-off-by: Liam R. Howlett <[email protected]>
Reported-by: Ondrej Mosnacek <[email protected]>
Reported-by: <[email protected]>
Acked-by: Carlos Llamas <[email protected]>
Tested-by: Ondrej Mosnacek <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Christian Brauner (Microsoft) <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Hridya Valsaraju <[email protected]>
Cc: Joel Fernandes <[email protected]>
Cc: Martijn Coenen <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Todd Kjos <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: "Arve Hjønnevåg" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Fix two issues introduced recently and one driver problem leading to a
NULL pointer dereference in some cases.
Specifics:
- Add missing EXPORT_SYMBOL_GPL in the thermal core and add back the
required 'trips' property to the thermal zone DT bindings (Daniel
Lezcano)
- Prevent the int340x_thermal driver from crashing when a package
with a buffer of 0 length is returned by an ACPI control method
evaluated by it (Lee, Chun-Yi)"
* tag 'thermal-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/int340x_thermal: handle data_vault when the value is ZERO_SIZE_PTR
dt-bindings: thermal: Fix missing required property
thermal/core: Add missing EXPORT_SYMBOL_GPL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Make __resolve_freq() check the presence of the frequency table
instead of checking whether or not the ->target_index() callback is
implemented by the driver, because that need not be the case when
__resolve_freq() is used (Lukasz Luba)"
* tag 'pm-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: check only freq_table in __resolve_freq()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix issues introduced by recent changes related to the handling
of ACPI device properties and a coding mistake in the exit path of the
ACPI processor driver.
Specifics:
- Prevent acpi_thermal_cpufreq_exit() from attempting to remove
the same frequency QoS request multiple times (Riwen Lu)
- Fix type detection for integer ACPI device properties (Stefan
Binding)
- Avoid emitting false-positive warnings when processing ACPI
device properties and drop the useless default case from the
acpi_copy_property_array_uint() macro (Sakari Ailus)"
* tag 'acpi-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: property: Remove default association from integer maximum values
ACPI: property: Ignore already existing data node tags
ACPI: property: Fix type detection of unified integer reading functions
ACPI: processor: Remove freq Qos request for all CPUs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- two minor cleanups
- a fix of the xen/privcmd driver avoiding a possible NULL dereference
in an error case
* tag 'for-linus-6.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/privcmd: fix error exit of privcmd_ioctl_dm_op()
xen: move from strlcpy with unused retval to strscpy
xen: x86: remove setting the obsolete config XEN_MAX_DOMAIN_MEMORY
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes and updates from Helge Deller:
"Mostly just small patches, with the exception of the bigger indenting
cleanups in the sisfb and radeonfb drivers.
Two patches should be mentioned though: A fix-up for fbdev if the
screen resize fails (by Shigeru Yoshida), and a potential divide by
zero fix in fb_pm2fb (by Letu Ren).
Summary:
Major fixes:
- Revert the changes for fbcon console when vc_resize() fails
[Shigeru Yoshida]
- Avoid a potential divide by zero error in fb_pm2fb [Letu Ren]
Minor fixes:
- Add missing pci_disable_device() in chipsfb_pci_init() [Yang
Yingliang]
- Fix tests for platform_get_irq() failure in omapfb [Yu Zhe]
- Destroy mutex on freeing struct fb_info in fbsysfs [Shigeru
Yoshida]
Cleanups:
- Move fbdev drivers from strlcpy to strscpy [Wolfram Sang]
- Indenting fixes, comment fixes, ... [Jiapeng Chong & Jilin Yuan]"
* tag 'fbdev-for-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: fbcon: Properly revert changes when vc_resize() failed
fbdev: Move fbdev drivers from strlcpy to strscpy
fbdev: omap: Remove unnecessary print function dev_err()
fbdev: chipsfb: Add missing pci_disable_device() in chipsfb_pci_init()
fbdev: fbcon: Destroy mutex on freeing struct fb_info
fbdev: radeon: Clean up some inconsistent indenting
fbdev: sisfb: Clean up some inconsistent indenting
fbdev: fb_pm2fb: Avoid potential divide by zero error
fbdev: ssd1307fb: Fix repeated words in comments
fbdev: omapfb: Fix tests for platform_get_irq() failure
|
|
Merge thermal control core fixes for 6.0-rc3:
- Fix missing required property for thermal zone description (Daniel
Lezcano).
- Add missing export symbol for
thermal_zone_device_register_with_trips() (Daniel Lezcano).
* thermal-core:
dt-bindings: thermal: Fix missing required property
thermal/core: Add missing EXPORT_SYMBOL_GPL
|
|
* acpi-processor:
ACPI: processor: Remove freq Qos request for all CPUs
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes, lots of amdgpu fixes mostly for IP blocks introduced in
6.0-rc1, otherwise vc4, nouveau fixes.
gem:
- Fix handle release leak
nouveau:
- Fix fencing when moving BO
vc4:
- HDMI fixes
amdgpu:
- GFX 11.0 fixes
- PSP XGMI handling fixes
- GFX9 fix for compute-only IPs
- Drop duplicated function call
- Fix warning due to missing header
- NBIO 7.7 fixes
- DCN 3.1.4 fixes
- SDMA 6.0 fixes
- SMU 13.0 fixes
- Arcturus GPUVM page table fix
- MMHUB 1.0 fix
amdkfd:
- GC 10.3.7 fix
radeon:
- Delayed work flush fix"
* tag 'drm-fixes-2022-08-26-1' of git://anongit.freedesktop.org/drm/drm: (21 commits)
drm/amdgpu: mmVM_L2_CNTL3 register not initialized correctly
drm/amdgpu: add MGCG perfmon setting for gfx11
drm/amdkfd: Fix isa version for the GC 10.3.7
drm/amdgpu: Fix page table setup on Arcturus
drm/amd/pm: update SMU 13.0.0 driver_if header
drm/amdgpu: add sdma instance check for gfx11 CGCG
drm/amd/display: enable PCON support for dcn314
drm/amdgpu: enable NBIO IP v7.7.0 Clock Gating
drm/amdgpu: add NBIO IP v7.7.0 Clock Gating support
drm/amdgpu: add TX_POWER_CTRL_1 macro definitions for NBIO IP v7.7.0
nouveau: explicitly wait on the fence in nouveau_bo_move_m2mf
drm/radeon: add a force flush to delay work when radeon
drm/amd/display: Include missing header
drm/amdgpu: Remove the additional kfd pre reset call for sriov
drm/amdgpu: Check num_gfx_rings for gfx v9_0 rb setup.
drm/amdgpu: fix hive reference leak when adding xgmi device
drm/amdgpu: Move psp_xgmi_terminate call from amdgpu_xgmi_remove_device to psp_hw_fini
drm/amdgpu: enable GFXOFF allow control for GC IP v11.0.1
drm/gem: Fix GEM handle release errors
drm/vc4: hdmi: Rework power up
...
|
|
Pull block fixes from Jens Axboe:
- MD pull request via Song:
- Fix for clustered raid (Guoqing Jiang)
- req_op fix (Bart Van Assche)
- Fix race condition in raid recreate (David Sloan)
- loop configuration overflow fix (Siddh)
- Fix missing commit_rqs call for certain conditions (Yu)
* tag 'block-6.0-2022-08-26' of git://git.kernel.dk/linux-block:
md: call __md_stop_writes in md_stop
Revert "md-raid: destroy the bitmap after destroying the thread"
md: Flush workqueue md_rdev_misc_wq in md_alloc()
md/raid10: Fix the data type of an r10_sync_page_io() argument
loop: Check for overflow while configuring loop
blk-mq: fix io hung due to missing commit_rqs
|
|
fbcon_do_set_font() calls vc_resize() when font size is changed.
However, if if vc_resize() failed, current implementation doesn't
revert changes for font size, and this causes inconsistent state.
syzbot reported unable to handle page fault due to this issue [1].
syzbot's repro uses fault injection which cause failure for memory
allocation, so vc_resize() failed.
This patch fixes this issue by properly revert changes for font
related date when vc_resize() failed.
Link: https://syzkaller.appspot.com/bug?id=3443d3a1fa6d964dd7310a0cb1696d165a3e07c4 [1]
Reported-by: [email protected]
Signed-off-by: Shigeru Yoshida <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
CC: [email protected] # 5.15+
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Ten fixes.
Of the three core changes, the two large ones are a complete reversion
of the async rework and an ALUA timing rework (the latter shouldn't
affect non-ALUA paths).
The remaining patches are all small and all but one in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Revert "Rework asynchronous resume support"
scsi: core: Fix passthrough retry counter handling
scsi: ufs: core: Reduce the power mode change timeout
scsi: storvsc: Remove WQ_MEM_RECLAIM from storvsc_error_wq
scsi: ufs: host: ufs-exynos: Make fsd_ufs_drvs static
scsi: megaraid_sas: Remove unnecessary kfree()
scsi: megaraid_sas: Fix double kfree()
scsi: ufs: core: Enable link lost interrupt
scsi: core: Allow the ALUA transitioning state enough time
scsi: qla2xxx: Disable ATIO interrupt coalesce for quad port ISP27XX
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.0-2022-08-25:
amdgpu:
- GFX 11.0 fixes
- PSP XGMI handling fixes
- GFX9 fix for compute-only IPs
- Drop duplicated function call
- Fix warning due to missing header
- NBIO 7.7 fixes
- DCN 3.1.4 fixes
- SDMA 6.0 fixes
- SMU 13.0 fixes
- Arcturus GPUVM page table fix
- MMHUB 1.0 fix
amdkfd:
- GC 10.3.7 fix
radeon:
- Delayed work flush fix
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull:
* gem: Fixes handle release leak
* nouveau: Fix fencing when moving BO
* vc4: HDMI fixes
* Backmerging for v6.0-rc1
Signed-off-by: Dave Airlie <[email protected]>
From: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/YwclSWheC+Ai+u+v@linux-uq9g
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from ipsec and netfilter (with one broken Fixes tag).
Current release - new code bugs:
- dsa: don't dereference NULL extack in dsa_slave_changeupper()
- dpaa: fix <1G ethernet on LS1046ARDB
- neigh: don't call kfree_skb() under spin_lock_irqsave()
Previous releases - regressions:
- r8152: fix the RX FIFO settings when suspending
- dsa: microchip: keep compatibility with device tree blobs with no
phy-mode
- Revert "net: macsec: update SCI upon MAC address change."
- Revert "xfrm: update SA curlft.use_time", comply with RFC 2367
Previous releases - always broken:
- netfilter: conntrack: work around exceeded TCP receive window
- ipsec: fix a null pointer dereference of dst->dev on a metadata dst
in xfrm_lookup_with_ifid
- moxa: get rid of asymmetry in DMA mapping/unmapping
- dsa: microchip: make learning configurable and keep it off while
standalone
- ice: xsk: prohibit usage of non-balanced queue id
- rxrpc: fix locking in rxrpc's sendmsg
Misc:
- another chunk of sysctl data race silencing"
* tag 'net-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
net: lantiq_xrx200: restore buffer if memory allocation failed
net: lantiq_xrx200: fix lock under memory pressure
net: lantiq_xrx200: confirm skb is allocated before using
net: stmmac: work around sporadic tx issue on link-up
ionic: VF initial random MAC address if no assigned mac
ionic: fix up issues with handling EAGAIN on FW cmds
ionic: clear broken state on generation change
rxrpc: Fix locking in rxrpc's sendmsg
net: ethernet: mtk_eth_soc: fix hw hash reporting for MTK_NETSYS_V2
MAINTAINERS: rectify file entry in BONDING DRIVER
i40e: Fix incorrect address type for IPv6 flow rules
ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter
net: Fix a data-race around sysctl_somaxconn.
net: Fix a data-race around netdev_unregister_timeout_secs.
net: Fix a data-race around gro_normal_batch.
net: Fix data-races around sysctl_devconf_inherit_init_net.
net: Fix data-races around sysctl_fb_tunnels_only_for_init_net.
net: Fix a data-race around netdev_budget_usecs.
net: Fix data-races around sysctl_max_skb_frags.
net: Fix a data-race around netdev_budget.
...
|
|
In a situation where memory allocation fails, an invalid buffer address
is stored. When this descriptor is used again, the system panics in the
build_skb() function when accessing memory.
Fixes: 7ea6cd16f159 ("lantiq: net: fix duplicated skb in rx descriptor ring")
Signed-off-by: Aleksander Jan Bajkowski <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When the xrx200_hw_receive() function returns -ENOMEM, the NAPI poll
function immediately returns an error.
This is incorrect for two reasons:
* the function terminates without enabling interrupts or scheduling NAPI,
* the error code (-ENOMEM) is returned instead of the number of received
packets.
After the first memory allocation failure occurs, packet reception is
locked due to disabled interrupts from DMA..
Fixes: fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver")
Signed-off-by: Aleksander Jan Bajkowski <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
xrx200_hw_receive() assumes build_skb() always works and goes straight
to skb_reserve(). However, build_skb() can fail under memory pressure.
Add a check in case build_skb() failed to allocate and return NULL.
Fixes: e015593573b3 ("net: lantiq_xrx200: convert to build_skb")
Reported-by: Eric Dumazet <[email protected]>
Signed-off-by: Aleksander Jan Bajkowski <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This is a follow-up to the discussion in [0]. It seems to me that
at least the IP version used on Amlogic SoC's sometimes has a problem
if register MAC_CTRL_REG is written whilst the chip is still processing
a previous write. But that's just a guess.
Adding a delay between two writes to this register helps, but we can
also simply omit the offending second write. This patch uses the second
approach and is based on a suggestion from Qi Duan.
Benefit of this approach is that we can save few register writes, also
on not affected chip versions.
[0] https://www.spinics.net/lists/netdev/msg831526.html
Fixes: bfab27a146ed ("stmmac: add the experimental PCI support")
Suggested-by: Qi Duan <[email protected]>
Suggested-by: Jerome Brunet <[email protected]>
Signed-off-by: Heiner Kallweit <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-08-24 (ixgbe, i40e)
This series contains updates to ixgbe and i40e drivers.
Jake stops incorrect resetting of SYSTIME registers when starting
cyclecounter for ixgbe.
Sylwester corrects a check on source IP address when validating destination
for i40e.
* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: Fix incorrect address type for IPv6 flow rules
ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Assign a random mac address to the VF interface station
address if it boots with a zero mac address in order to match
similar behavior seen in other VF drivers. Handle the errors
where the older firmware does not allow the VF to set its own
station address.
Newer firmware will allow the VF to set the station mac address
if it hasn't already been set administratively through the PF.
Setting it will also be allowed if the VF has trust.
Fixes: fbb39807e9ae ("ionic: support sr-iov operations")
Signed-off-by: R Mohamed Shah <[email protected]>
Signed-off-by: Shannon Nelson <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In looping on FW update tests we occasionally see the
FW_ACTIVATE_STATUS command fail while it is in its EAGAIN loop
waiting for the FW activate step to finsh inside the FW. The
firmware is complaining that the done bit is set when a new
dev_cmd is going to be processed.
Doing a clean on the cmd registers and doorbell before exiting
the wait-for-done and cleaning the done bit before the sleep
prevents this from occurring.
Fixes: fbfb8031533c ("ionic: Add hardware init and device commands")
Signed-off-by: Shannon Nelson <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
There is a case found in heavy testing where a link flap happens just
before a firmware Recovery event and the driver gets stuck in the
BROKEN state. This comes from the driver getting interrupted by a FW
generation change when coming back up from the link flap, and the call
to ionic_start_queues() in ionic_link_status_check() fails. This can be
addressed by having the fw_up code clear the BROKEN bit if seen, rather
than waiting for a user to manually force the interface down and then
back up.
Fixes: 9e8eaf8427b6 ("ionic: stop watchdog when in broken state")
Signed-off-by: Shannon Nelson <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The mmVM_L2_CNTL3 register is not assigned an initial value
Signed-off-by: Qu Huang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Enable GFX11 MGCG perfmon setting.
V2: set rlc to saft mode before setting.
Signed-off-by: Likun Gao <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Correct the isa version for handling KFD test.
Fixes: 7c4f4f197e0c ("drm/amdkfd: Add GC 10.3.6 and 10.3.7 KFD definitions")
Signed-off-by: Prike Liang <[email protected]>
Reviewed-by: Aaron Liu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
When translate_further is enabled, page table depth needs to
be updated. This was missing on Arcturus MMHUB init. This was
causing address translations to fail for SDMA user-mode queues.
Fixes: 352e683b72e7 ("drm/amdgpu: Enable translate_further to extend UTCL2 reach")
Reviewed-by: Felix Kuehling <[email protected]>
Acked-by: Christian König <[email protected]>
Signed-off-by: Mukul Joshi <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
To fit the latest 78.53 PMFW.
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Feifei Xu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
For some ASICs, like GFX IP v11.0.1, only have one SDMA instance,
so not need to configure SDMA1_RLC_CGCG_CTRL for this case.
Signed-off-by: Tim Huang <[email protected]>
Reviewed-by: Yifan Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
DCN314 supports PCON.
[How]
Explicitly enable it in dcn314 resources.
Signed-off-by: Roman Li <[email protected]>
Reviewed-by: Hamza Mahfooz <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Enable AMD_CG_SUPPORT_BIF_MGCG and AMD_CG_SUPPORT_BIF_LS support.
Signed-off-by: Tim Huang <[email protected]>
Reviewed-by: Yifan Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add BIF Clock Gating MGCG and LS support for NBIO IP v7.7.0.
Signed-off-by: Tim Huang <[email protected]>
Reviewed-by: Yifan Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add the BIF0_PCIE_TX_POWER_CTRL_1 register offset and mask macro
definitions for AMD_CG_SUPPORT_BIF_LS.
Signed-off-by: Tim Huang <[email protected]>
Reviewed-by: Yifan Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The error exit of privcmd_ioctl_dm_op() is calling unlock_pages()
potentially with pages being NULL, leading to a NULL dereference.
Additionally lock_pages() doesn't check for pin_user_pages_fast()
having been completely successful, resulting in potentially not
locking all pages into memory. This could result in sporadic failures
when using the related memory in user mode.
Fix all of that by calling unlock_pages() always with the real number
of pinned pages, which will be zero in case pages being NULL, and by
checking the number of pages pinned by pin_user_pages_fast() matching
the expected number of pages.
Cc: <[email protected]>
Fixes: ab520be8cd5d ("xen/privcmd: Add IOCTL_PRIVCMD_DM_OP")
Reported-by: Rustam Subkhankulov <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Jan Beulich <[email protected]>
Reviewed-by: Oleksandr Tyshchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <[email protected]>
Reviewed-by: Oleksandr Tyshchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
|
|
Remove the default association from integer maximum value checks. It is
not necessary and has caused a bug in other associations being unnoticed.
Fixes: 923044133367 ("ACPI: property: Unify integer value reading functions")
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
ACPI node pointers are attached to data node handles, in order to resolve
string references to them. _DSD guide allows the same node to be reached
from multiple parent nodes, leading the node enumeration algorithm to each
such nodes more than once. As attached data already already exists,
attaching data with the same tag will fail. Address this problem by
ignoring nodes that have been already tagged.
Fixes: 1d52f10917a7 ("ACPI: property: Tie data nodes to acpi handles")
Reported-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Tested-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|