aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-06-17usb: host: u132-hcd: remove redundant continue statementsColin Ian King1-4/+2
There are continue statements at the end of loops that have no effect and are redundant. Remove them. Signed-off-by: Colin Ian King <[email protected]> Addresses-Coverity: ("Continue has no effect") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-17usb: host: xhci-tegra: Use devm_platform_get_and_ioremap_resource()Yang Yingliang1-2/+1
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by: Yang Yingliang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-17usb: host: xhci-tegra: Add missing of_node_put() in tegra_xusb_probe()Yang Yingliang1-0/+1
This node pointer is returned by of_parse_phandle() with refcount incremented in this function. of_node_put() on it before exitting this function. Fixes: 971ee247060d ("usb: xhci: tegra: Enable ELPG for runtime/system PM") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Yang Yingliang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-17usb: host: xhci-tegra: add missing put_device() in tegra_xusb_probe()Yang Yingliang1-4/+8
Goto put_padctl to put refcount of device on error in tegra_xusb_probe() Fixes: 971ee247060d ("usb: xhci: tegra: Enable ELPG for runtime/system PM") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Yang Yingliang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-17usb: renesas-xhci: Fix handling of unknown ROM stateMoritz Fischer1-8/+8
The ROM load sometimes seems to return an unknown status (RENESAS_ROM_STATUS_NO_RESULT) instead of success / fail. If the ROM load indeed failed this leads to failures when trying to communicate with the controller later on. Attempt to load firmware using RAM load in those cases. Fixes: 2478be82de44 ("usb: renesas-xhci: Add ROM loader for uPD720201") Cc: [email protected] Cc: Mathias Nyman <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Vinod Koul <[email protected]> Tested-by: Vinod Koul <[email protected]> Reviewed-by: Vinod Koul <[email protected]> Signed-off-by: Moritz Fischer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-15usb: host: xhci-plat: Create platform device for onboard hubs in probe()Matthias Kaehlcke3-0/+9
Call onboard_hub_create/destroy_pdevs() from _probe()/_remove() to create/destroy platform devices for onboard USB hubs that may be connected to the root hub of the controller. These functions are a NOP unless CONFIG_USB_ONBOARD_HUB=y/m. Also add a field to struct xhci_hcd to keep track of the onboard hub platform devices that are owned by the xHCI. Signed-off-by: Matthias Kaehlcke <[email protected]> Link: https://lore.kernel.org/r/20210609150159.v12.4.I7a3a7d9d2126c34079b1cab87aa0b2ec3030f9b7@changeid Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-15USB: misc: Add onboard_usb_hub driverMatthias Kaehlcke3-0/+515
The main issue this driver addresses is that a USB hub needs to be powered before it can be discovered. For discrete onboard hubs (an example for such a hub is the Realtek RTS5411) this is often solved by supplying the hub with an 'always-on' regulator, which is kind of a hack. Some onboard hubs may require further initialization steps, like changing the state of a GPIO or enabling a clock, which requires even more hacks. This driver creates a platform device representing the hub which performs the necessary initialization. Currently it only supports switching on a single regulator, support for multiple regulators or other actions can be added as needed. Different initialization sequences can be supported based on the compatible string. Besides performing the initialization the driver can be configured to power the hub off during system suspend. This can help to extend battery life on battery powered devices which have no requirements to keep the hub powered during suspend. The driver can also be configured to leave the hub powered when a wakeup capable USB device is connected when suspending, and power it off otherwise. Technically the driver consists of two drivers, the platform driver described above and a very thin USB driver that subclasses the generic driver. The purpose of this driver is to provide the platform driver with the USB devices corresponding to the hub(s) (a hub controller may provide multiple 'logical' hubs, e.g. one to support USB 2.0 and another for USB 3.x). Note: the current series only supports hubs connected directly to a root hub (through xhci-plat), support for other configurations could be added if needed. Co-developed-by: Ravi Chandra Sadineni <[email protected]> Acked-by: Alan Stern <[email protected]> Signed-off-by: Ravi Chandra Sadineni <[email protected]> Signed-off-by: Matthias Kaehlcke <[email protected]> Link: https://lore.kernel.org/r/20210609150159.v12.2.I7c9a1f1d6ced41dd8310e8a03da666a32364e790@changeid Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-15usb: mtu3: use clock bulk to get clocksChunfeng Yun2-80/+18
Use clock bulk helpers to get/enable/disable clocks, meanwhile make sys_ck optional, then will be easier to handle clocks. Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-15usb: mtu3: rebuild role switch get/set hooksChunfeng Yun1-10/+3
Use common helper ssusb_set_mode() to do role switch instead of manual switch helper; Remove unnecessary local variable when get role status Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-15usb: mtu3: use force mode for dual role switchChunfeng Yun2-12/+4
Force IDDIG status for all three ways of dual role switch, this is needed when use Type-C to switch mode. Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-15usb: mtu3: add helper to get pointer of ssusb_mtk structChunfeng Yun1-10/+10
Add a helper to get pointer of ssusb_mtk struct from the pointer of otg_switch_mtk struct. Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-15usb: mtu3: rebuild role switch flow of extconChunfeng Yun2-32/+38
This is a preparation patch to plan to use the same work to handle role switch for all three supported ways. Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-15usb: mtu3: use enum usb_role instead of private defined onesChunfeng Yun1-37/+15
Now we mainly use usb-role-switch to set dual role mode, and all three ways supported use the same function to switch mode, use usb_role enum will make code clear Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-15usb: mtu3: drop support vbus detectionChunfeng Yun2-55/+2
Until now it's never used on any platform, and will not used later. Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-15usb: mtu3: remove wakelockChunfeng Yun1-3/+0
Prefer to use /sys/power/wake_lock instead. Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-15usb: mtu3: power down port when power down device IPChunfeng Yun1-0/+9
When power down device IP, we can also power down device port, then power on the port again when power on device ip, it's helpful to make device ip enter ip sleep mode. Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-15usb: mtu3: power down device IP by defaultChunfeng Yun1-4/+3
Power down device IP by default until @udc_start is called. Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-15usb: isp1760: Fix meaningless check in isp1763_run()Tong Tiangen1-1/+0
Remove attribution to retval before check, which make it completely meaningless, and does't check what it was supposed: the return value of the timed function to set up configuration flag. Fixes: 60d789f3bfbb ("usb: isp1760: add support for isp1763") Tested-by: Rui Miguel Silva <[email protected]> Reviewed-by: Rui Miguel Silva <[email protected]> Signed-off-by: Tong Tiangen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-15usb: renesas-xhci: Replace BIT(15) with macroMoritz Fischer1-1/+1
Replace BIT(15) with RENESAS_ROM_STATUS_ROM_EXISTS. Signed-off-by: Moritz Fischer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-15usb: phy: tegra: Correct definition of B_SESS_VLD_WAKEUP_EN bitDmitry Osipenko1-3/+2
The B_SESS_VLD_WAKEUP_EN bit 6 was added by a mistake in a previous commit. This bit corresponds to B_SESS_END_WAKEUP_EN, which we don't use. The B_VBUS_VLD_WAKEUP_EN doesn't exist at all and B_SESS_VLD_WAKEUP_EN needs to be in place of it. We don't utilize B-sensors in the driver, so it never was a problem, nevertheless let's correct the definition of the bits. Fixes: 35192007d28d ("usb: phy: tegra: Support waking up from a low power mode") Signed-off-by: Dmitry Osipenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-15usb: phy: tegra: Wait for VBUS wakeup status deassertion on suspendDmitry Osipenko1-0/+10
Some devices need an extra delay after losing VBUS, otherwise VBUS may be detected as active at suspend time, preventing the PHY's suspension by the VBUS detection sensor. This problem was found on Asus Transformer TF700T (Tegra30) tablet device, where the USB PHY wakes up immediately from suspend because VBUS sensor continues to detect VBUS as active after disconnection. We need to poll the PHY's VBUS wakeup status until it's deasserted before suspending PHY in order to fix this minor trouble. Fixes: 35192007d28d ("usb: phy: tegra: Support waking up from a low power mode") Reported-by: Maxim Schwalm <[email protected]> # Asus TF700T Tested-by: Maxim Schwalm <[email protected]> # Asus TF700T Reviewed-by: Peter Chen <[email protected]> Signed-off-by: Dmitry Osipenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-14usb: gadget: fsl: properly remove remnant of MXC supportLi Yang2-49/+6
Commit a390bef7db1f ("usb: gadget: fsl_mxc_udc: Remove the driver") didn't remove all the MXC related stuff which can cause build problem for LS1021 when enabled again in Kconfig. This patch remove all the remnants. Reviewed-by: Fabio Estevam <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Signed-off-by: Li Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-14Merge tag 'for-5.14-usb' of ↵Greg Kroah-Hartman5-382/+2428
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into usb-next Thierry writes: usb: tegra: Changes for v5.14-rc1 Implements proper suspend/resume for the XUSB controller found on recent Tegra chips. * tag 'for-5.14-usb' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: usb: xhci: tegra: Enable ELPG for runtime/system PM usb: xhci: tegra: Unlink power domain devices phy: tegra: xusb: Add wake/sleepwalk for Tegra186 phy: tegra: xusb: Tegra210 host mode VBUS control phy: tegra: xusb: Add wake/sleepwalk for Tegra210 phy: tegra: xusb: Add sleepwalk and suspend/resume phy: tegra: xusb: Add Tegra210 lane_iddq operation phy: tegra: xusb: Rearrange UPHY init on Tegra210 phy: tegra: xusb: Move usb3 port init for Tegra210
2021-06-14usb: musb: Implement tracing for state change eventsTony Lindgren2-16/+35
The devctl register on musb is the only way to get state information on musb. The hardware can easily get confused because it tries to do things on it's own automagically, and things like slow VBUS rise can make things fail. Let's make it easier to debug the ongoing state change issues that keep popping up on regular basis and add tracing support. With these changes we can easily trace musb state change events with: echo 1 > /sys/kernel/debug/tracing/events/musb/musb_state/enable cat /sys/kernel/debug/tracing/trace_pipe echo 0 > /sys/kernel/debug/tracing/events/musb/musb_state/enable Cc: Alexandre Belloni <[email protected]> Cc: Andreas Kemnade <[email protected]> Cc: Bhushan Shah <[email protected]> Cc: Drew Fustini <[email protected]> Cc: Thomas Petazzoni <[email protected]> Signed-off-by: Tony Lindgren <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-14usb: musb: Simplify cable state handlingTony Lindgren1-20/+20
Simplify cable state handling a bit to leave out duplicated code. We are just scheduling work and showing state info if a recheck is needed. No intended functional changes. Cc: Alexandre Belloni <[email protected]> Cc: Andreas Kemnade <[email protected]> Cc: Bhushan Shah <[email protected]> Cc: Drew Fustini <[email protected]> Cc: Thomas Petazzoni <[email protected]> Signed-off-by: Tony Lindgren <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-14Merge tag 'v5.13-rc6' into usb-nextGreg Kroah-Hartman266-1063/+2198
We want the usb fixes in here as well, and this resolves some merge issues with: drivers/usb/dwc3/debugfs.c drivers/usb/dwc3/gadget.c Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-13Merge tag 'scsi-fixes' of ↵Linus Torvalds1-21/+26
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four reasonably small fixes to the core for scsi host allocation failure paths. The root problem is that we're not freeing the memory allocated by dev_set_name(), which involves a rejig of may of the free on error paths to do put_device() instead of kfree which, in turn, has several other knock on ramifications and inspection turned up a few other lurking bugs" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: core: Only put parent device if host state differs from SHOST_CREATED scsi: core: Put .shost_dev in failure path if host state changes to RUNNING scsi: core: Fix failure handling of scsi_add_host_with_dma() scsi: core: Fix error handling of scsi_host_alloc()
2021-06-12Merge tag 'usb-5.13-rc6' of ↵Linus Torvalds35-126/+258
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of tiny USB fixes for 5.13-rc6. There are more than I would normally like, but there's been a bunch of people banging on the gadget and dwc3 and typec code recently for I think an Android release, which has resulted in a number of small fixes. It's nice to see companies send fixes upstream for this type of work, a notable change from years ago. Anyway, fixes in here are: - usb-serial device id updates - usb-serial cp210x driver fixes for broken firmware versions - typec fixes for crazy charging devices and other reported problems - dwc3 fixes for reported problems found - gadget fixes for reported problems - tiny xhci fixes - other small fixes for reported issues. - revert of a problem fix found by linux-next testing All of these have passed 0-day and linux-next testing with no reported problems (the revert for the found linux-next build problem included)" * tag 'usb-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (44 commits) Revert "usb: gadget: fsl: Re-enable driver for ARM SoCs" usb: typec: mux: Fix copy-paste mistake in typec_mux_match usb: typec: ucsi: Clear PPM capability data in ucsi_init() error path usb: gadget: fsl: Re-enable driver for ARM SoCs usb: typec: wcove: Use LE to CPU conversion when accessing msg->header USB: serial: cp210x: fix CP2102N-A01 modem control USB: serial: cp210x: fix alternate function for CP2102N QFN20 usb: misc: brcmstb-usb-pinmap: check return value after calling platform_get_resource() usb: dwc3: ep0: fix NULL pointer exception usb: gadget: eem: fix wrong eem header operation usb: typec: intel_pmc_mux: Put ACPI device using acpi_dev_put() usb: typec: intel_pmc_mux: Add missed error check for devm_ioremap_resource() usb: typec: intel_pmc_mux: Put fwnode in error case during ->probe() usb: typec: tcpm: Do not finish VDM AMS for retrying Responses usb: fix various gadget panics on 10gbps cabling usb: fix various gadgets null ptr deref on 10gbps cabling. usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir usb: f_ncm: only first packet of aggregate needs to start timer USB: f_ncm: ncm_bitrate (speed) is unsigned MAINTAINERS: usb: add entry for isp1760 ...
2021-06-12Merge tag 'tty-5.13-rc6' of ↵Linus Torvalds1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fix from Greg KH: "A single 8250_exar serial driver fix for a reported problem with a change that happened in 5.13-rc1. It has been in linux-next with no reported problems" * tag 'tty-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250_exar: Avoid NULL pointer dereference at ->exit()
2021-06-12Merge tag 'staging-5.13-rc6' of ↵Linus Torvalds2-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Two tiny staging driver fixes: - ralink-gdma driver authorship information fixed up - rtl8723bs driver fix for reported regression Both have been in linux-next for a while with no reported problems" * tag 'staging-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: ralink-gdma: Remove incorrect author information staging: rtl8723bs: Fix uninitialized variables
2021-06-12Merge tag 'char-misc-5.13-rc6' of ↵Linus Torvalds16-20/+91
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small misc driver fixes for 5.13-rc6 that fix some reported problems: - Tiny phy driver fixes for reported issues - rtsx regression for when the device suspended - mhi driver fix for a use-after-free All of these have been in linux-next for a few days with no reported issues" * tag 'char-misc-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: misc: rtsx: separate aspm mode into MODE_REG and MODE_CFG bus: mhi: pci-generic: Fix hibernation bus: mhi: pci_generic: Fix possible use-after-free in mhi_pci_remove() bus: mhi: pci_generic: T99W175: update channel name from AT to DUN phy: Sparx5 Eth SerDes: check return value after calling platform_get_resource() phy: ralink: phy-mt7621-pci: drop 'of_match_ptr' to fix -Wunused-const-variable phy: ti: Fix an error code in wiz_probe() phy: phy-mtk-tphy: Fix some resource leaks in mtk_phy_init() phy: cadence: Sierra: Fix error return code in cdns_sierra_phy_probe() phy: usb: Fix misuse of IS_ENABLED
2021-06-12Merge tag 'pinctrl-v5.13-2' of ↵Linus Torvalds7-17/+19
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: - Fix some documentation warnings for Allwinner - Fix duplicated GPIO groups on Qualcomm SDX55 - Fix a double enablement bug in the Ralink driver - Fix the Qualcomm SC8180x Kconfig so the driver can be selected. * tag 'pinctrl-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: qcom: Make it possible to select SC8180x TLMM pinctrl: ralink: rt2880: avoid to error in calls is pin is already enabled pinctrl: qcom: Fix duplication in gpio_groups pinctrl: aspeed: Fix minor documentation error
2021-06-12Merge tag 'block-5.13-2021-06-12' of git://git.kernel.dk/linux-blockLinus Torvalds7-51/+15
Pull block fixes from Jens Axboe: "A few fixes that should go into 5.13: - Fix a regression deadlock introduced in this release between open and remove of a bdev (Christoph) - Fix an async_xor md regression in this release (Xiao) - Fix bcache oversized read issue (Coly)" * tag 'block-5.13-2021-06-12' of git://git.kernel.dk/linux-block: block: loop: fix deadlock between open and remove async_xor: check src_offs is not NULL before updating it bcache: avoid oversized read request in cache missing code path bcache: remove bcache device self-defined readahead
2021-06-11Merge tag 'gpio-fixes-for-v5.13-rc6' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fix from Bartosz Golaszewski: "Fix a shift-out-of-bounds error in gpio-wcd934x" * tag 'gpio-fixes-for-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: wcd934x: Fix shift-out-of-bounds error
2021-06-11Merge tag 'drm-fixes-2021-06-11' of git://anongit.freedesktop.org/drm/drmLinus Torvalds19-79/+232
Pull drm fixes from Dave Airlie: "Another week of fixes, nothing too crazy, but a few all over the place. Two locking fixes in the core/ttm area, a couple of small driver fixes (radeon, sun4i, mcde, vc4). Then msm and amdgpu have a set of fixes each, mostly for smaller things, though the msm has a DSI fix for a black screen. I haven't seen any intel fixes this week so they may have a few that may or may not wait for next week. drm: - auth locking fix ttm: - locking fix amdgpu: - Use kvzmalloc in amdgu_bo_create - Use drm_dbg_kms for reporting failure to get a GEM FB - Fix some register offsets for Sienna Cichlid - Fix fall-through warning radeon: - memcpy_to/from_io fixes msm: - NULL ptr deref fix - CP_PROTECT reg programming fix - incorrect register shift fix - DSI blank screen fix sun4i: - hdmi output probing fix mcde: - DSI pipeline calc fix vc4: - out of bounds fix" * tag 'drm-fixes-2021-06-11' of git://anongit.freedesktop.org/drm/drm: drm/msm/dsi: Stash away calculated vco frequency on recalc drm: Lock pointer access in drm_master_release() drm/mcde: Fix off by 10^3 in calculation drm/msm/a6xx: avoid shadow NULL reference in failure path drm/msm/a6xx: fix incorrectly set uavflagprd_inv field for A650 drm/msm/a6xx: update/fix CP_PROTECT initialization radeon: use memcpy_to/fromio for UVD fw upload drm/amd/pm: Fix fall-through warning for Clang drm/amdgpu: Fix incorrect register offsets for Sienna Cichlid drm/amdgpu: Use drm_dbg_kms for reporting failure to get a GEM FB drm/amdgpu: switch kzalloc to kvzalloc in amdgpu_bo_create drm/msm: Init mm_list before accessing it for use_vram path drm: Fix use-after-free read in drm_getunique() drm/vc4: fix vc4_atomic_commit_tail() logic drm/ttm: fix deref of bo->ttm without holding the lock v2 drm/sun4i: dw-hdmi: Make HDMI PHY into a platform device
2021-06-11Merge tag 'acpi-5.13-rc6' of ↵Linus Torvalds2-22/+9
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These revert a problematic recent commit and fix a regression introduced during the 5.12 development cycle. Specifics: - Revert recent commit that attempted to fix the FACS table reference counting but introduced a problem with accessing the hardware signature after hibernation (Zhang Rui). - Fix regression in the _OSC handling that broke the loading of ACPI tables on some systems (Mika Westerberg)" * tag 'acpi-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: Pass the same capabilities to the _OSC regardless of the query flag Revert "ACPI: sleep: Put the FACS table after using it"
2021-06-11block: loop: fix deadlock between open and removeChristoph Hellwig2-18/+8
Commit c76f48eb5c08 ("block: take bd_mutex around delete_partitions in del_gendisk") adds disk->part0->bd_mutex in del_gendisk(), this way causes the following AB/BA deadlock between removing loop and opening loop: 1) loop_control_ioctl(LOOP_CTL_REMOVE) -> mutex_lock(&loop_ctl_mutex) -> del_gendisk -> mutex_lock(&disk->part0->bd_mutex) 2) blkdev_get_by_dev -> mutex_lock(&disk->part0->bd_mutex) -> lo_open -> mutex_lock(&loop_ctl_mutex) Add a new Lo_deleting state to remove the need for clearing ->private_data and thus holding loop_ctl_mutex in the ioctl LOOP_CTL_REMOVE path. Based on an analysis and earlier patch from Ming Lei <[email protected]>. Reported-by: Colin Ian King <[email protected]> Fixes: c76f48eb5c08 ("block: take bd_mutex around delete_partitions in del_gendisk") Signed-off-by: Christoph Hellwig <[email protected]> Tested-by: Colin Ian King <[email protected]> Reviewed-by: Ming Lei <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2021-06-11Merge tag 'hwmon-for-v5.13-rc6' of ↵Linus Torvalds3-2/+38
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fixes for tps23861, scpi-hwmon, and corsair-psu drivers, plus a bindings fix for TI ADS7828" * tag 'hwmon-for-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (tps23861) correct shunt LSB values hwmon: (tps23861) set current shunt value hwmon: (tps23861) define regmap max register hwmon: (scpi-hwmon) shows the negative temperature properly hwmon: (corsair-psu) fix suspend behavior dt-bindings: hwmon: Fix typo in TI ADS7828 bindings
2021-06-11Merge tag 'mmc-v5.13-rc3' of ↵Linus Torvalds1-2/+7
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "A couple of MMC fixes to the Renesas SDHI driver: - Fix HS400 on R-Car M3-W+ - Abort tuning when timeout detected" * tag 'mmc-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: renesas_sdhi: Fix HS400 on R-Car M3-W+ mmc: renesas_sdhi: abort tuning when timeout detected
2021-06-11usb: xhci: tegra: Enable ELPG for runtime/system PMJC Kuo1-37/+370
This commit implements the complete programming sequence for ELPG entry and exit. 1. At ELPG entry, invokes tegra_xusb_padctl_enable_phy_sleepwalk() and tegra_xusb_padctl_enable_phy_wake() to configure XUSB PADCTL sleepwalk and wake detection circuits to maintain USB lines level and respond to wake events (wake-on-connect, wake-on-disconnect, device-initiated-wake). 2. At ELPG exit, invokes tegra_xusb_padctl_disable_phy_sleepwalk() and tegra_xusb_padctl_disable_phy_wake() to disarm sleepwalk and wake detection circuits. At runtime suspend, XUSB host controller can enter ELPG to reduce power consumption. When XUSB PADCTL wake detection circuit detects a wake event, an interrupt will be raised. xhci-tegra driver then will invoke pm_runtime_resume() for xhci-tegra. Runtime resume could also be triggered by protocol drivers, this is the host-initiated-wake event. At runtime resume, xhci-tegra driver brings XUSB host controller out of ELPG to handle the wake events. The same ELPG enter/exit procedure will be performed for system suspend/resume path so USB devices can remain connected across SC7. Signed-off-by: JC Kuo <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-06-11usb: xhci: tegra: Unlink power domain devicesJC Kuo1-94/+112
This commit unlinks xhci-tegra platform device with SS/host power domain devices. Reasons for this change is - at ELPG entry, PHY sleepwalk and wake configuration need to be done before powering down SS/host partitions, and PHY need be powered off after powering down SS/host partitions. Sequence looks like roughly below: tegra_xusb_enter_elpg() -> xhci_suspend() -> enable PHY sleepwalk and wake if needed -> power down SS/host partitions -> power down PHY If SS/host power domains are linked to xhci-tegra platform device, we are not able to perform the sequence like above. This commit introduces: 1. tegra_xusb_unpowergate_partitions() to power up SS and host partitions together. If SS/host power domain devices are available, it invokes pm_runtime_get_sync() to request power driver to power up partitions; If power domain devices are not available, tegra_powergate_sequence_power_up() will be used to power up partitions. 2. tegra_xusb_powergate_partitions() to power down SS and host partitions together. If SS/host power domain devices are available, it invokes pm_runtime_put_sync() to request power driver to power down partitions; If power domain devices are not available, tegra_powergate_power_off() will be used to power down partitions. Signed-off-by: JC Kuo <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-06-11Merge branch 'acpi-bus'Rafael J. Wysocki1-19/+8
* acpi-bus: ACPI: Pass the same capabilities to the _OSC regardless of the query flag
2021-06-11Merge tag 'usb-serial-5.13-rc6' of ↵Greg Kroah-Hartman1-6/+78
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.13-rc6 Here are two fixes for the cp210x driver. The first fixes a regression with early revisions of the CP2102N which specifically broke some ESP32 development boards. The second makes sure that the pin configuration is detected properly also for the CP2102N QFN20 package. Both have been in linux-next over night and with no reported issues. * tag 'usb-serial-5.13-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: cp210x: fix CP2102N-A01 modem control USB: serial: cp210x: fix alternate function for CP2102N QFN20
2021-06-11Revert "usb: gadget: fsl: Re-enable driver for ARM SoCs"Greg Kroah-Hartman1-1/+1
This reverts commit e0e8b6abe8c862229ba00cdd806e8598cdef00bb. Turns out this breaks the build. We had numerous reports of problems from linux-next and 0-day about this not working properly, so revert it for now until it can be figured out properly. The build errors are: arm-linux-gnueabi-ld: fsl_udc_core.c:(.text+0x29d4): undefined reference to `fsl_udc_clk_finalize' arm-linux-gnueabi-ld: fsl_udc_core.c:(.text+0x2ba8): undefined reference to `fsl_udc_clk_release' fsl_udc_core.c:(.text+0x2848): undefined reference to `fsl_udc_clk_init' fsl_udc_core.c:(.text+0xe88): undefined reference to `fsl_udc_clk_release' Reported-by: Stephen Rothwell <[email protected]> Reported-by: kernel test robot <[email protected]> Fixes: e0e8b6abe8c8 ("usb: gadget: fsl: Re-enable driver for ARM SoCs") Cc: stable <[email protected]> Cc: Joel Stanley <[email protected]> Cc: Leo Li <[email protected]> Cc: Peter Chen <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Felipe Balbi <[email protected]> Cc: Shawn Guo <[email protected]> Cc: Ran Wang <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-11Merge tag 'amd-drm-fixes-5.13-2021-06-09' of ↵Dave Airlie5-11/+28
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.13-2021-06-09: amdgpu: - Use kvzmalloc in amdgu_bo_create - Use drm_dbg_kms for reporting failure to get a GEM FB - Fix some register offsets for Sienna Cichlid - Fix fall-through warning radeon: - memcpy_to/from_io fixes Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-06-11Merge tag 'drm-misc-fixes-2021-06-10' of ↵Dave Airlie9-26/+80
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes One fix for snu4i that prevents it from probing, two locking fixes for ttm and drm_auth, one off-by-x1000 fix for mcde and a fix for vc4 to prevent an out-of-bounds access. Signed-off-by: Dave Airlie <[email protected]> From: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20210610171653.lqsoadxrhdk73cdy@gilmour
2021-06-11Merge tag 'drm-msm-fixes-2021-06-10' of ↵Dave Airlie5-42/+124
https://gitlab.freedesktop.org/drm/msm into drm-fixes - NULL ptr deref fix - CP_PROTECT reg programming fix - incorrect register shift fix - DSI blank screen fix Signed-off-by: Dave Airlie <[email protected]> From: Rob Clark <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvbcz0=QxGYnX9u7cD1SCvFSx20dzrZuOccjtRRBTJd5Q@mail.gmail.com
2021-06-10usb: typec: mux: Fix copy-paste mistake in typec_mux_matchBjorn Andersson1-1/+1
Fix the copy-paste mistake in the return path of typec_mux_match(), where dev is considered a member of struct typec_switch rather than struct typec_mux. The two structs are identical in regards to having the struct device as the first entry, so this provides no functional change. Fixes: 3370db35193b ("usb: typec: Registering real device entries for the muxes") Reviewed-by: Heikki Krogerus <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-10usb: typec: ucsi: Clear PPM capability data in ucsi_init() error pathMayank Rana1-0/+1
If ucsi_init() fails for some reason (e.g. ucsi_register_port() fails or general communication failure to the PPM), particularly at any point after the GET_CAPABILITY command had been issued, this results in unwinding the initialization and returning an error. However the ucsi structure's ucsi_capability member retains its current value, including likely a non-zero num_connectors. And because ucsi_init() itself is done in a workqueue a UCSI interface driver will be unaware that it failed and may think the ucsi_register() call was completely successful. Later, if ucsi_unregister() is called, due to this stale ucsi->cap value it would try to access the items in the ucsi->connector array which might not be in a proper state or not even allocated at all and results in NULL or invalid pointer dereference. Fix this by clearing the ucsi->cap value to 0 during the error path of ucsi_init() in order to prevent a later ucsi_unregister() from entering the connector cleanup loop. Fixes: c1b0bc2dabfa ("usb: typec: Add support for UCSI interface") Cc: [email protected] Acked-by: Heikki Krogerus <[email protected]> Signed-off-by: Mayank Rana <[email protected]> Signed-off-by: Jack Pham <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-10usb: gadget: fsl: Re-enable driver for ARM SoCsJoel Stanley1-1/+1
The commit a390bef7db1f ("usb: gadget: fsl_mxc_udc: Remove the driver") dropped the ARCH_MXC dependency from USB_FSL_USB2, leaving it depending solely on FSL_SOC. FSL_SOC is powerpc only; it was briefly available on ARM in 2014 but was removed by commit cfd074ad8600 ("ARM: imx: temporarily remove CONFIG_SOC_FSL from LS1021A"). Therefore the driver can no longer be enabled on ARM platforms. This appears to be a mistake as arm64's ARCH_LAYERSCAPE and arm32 SOC_LS1021A SoCs use this symbol. It's enabled in these defconfigs: arch/arm/configs/imx_v6_v7_defconfig:CONFIG_USB_FSL_USB2=y arch/arm/configs/multi_v7_defconfig:CONFIG_USB_FSL_USB2=y arch/powerpc/configs/mgcoge_defconfig:CONFIG_USB_FSL_USB2=y arch/powerpc/configs/mpc512x_defconfig:CONFIG_USB_FSL_USB2=y To fix, expand the dependencies so USB_FSL_USB2 can be enabled on the ARM platforms, and with COMPILE_TEST. Fixes: a390bef7db1f ("usb: gadget: fsl_mxc_udc: Remove the driver") Signed-off-by: Joel Stanley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.