aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-06-10usb: typec: wcove: Use LE to CPU conversion when accessing msg->headerAndy Shevchenko1-1/+1
As LKP noticed the Sparse is not happy about strict type handling: .../typec/tcpm/wcove.c:380:50: sparse: expected unsigned short [usertype] header .../typec/tcpm/wcove.c:380:50: sparse: got restricted __le16 const [usertype] header Fix this by switching to use pd_header_cnt_le() instead of pd_header_cnt() in the affected code. Fixes: ae8a2ca8a221 ("usb: typec: Group all TCPCI/TCPM code together") Fixes: 3c4fb9f16921 ("usb: typec: wcove: start using tcpm for USB PD support") Reported-by: kernel test robot <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-10usb: typec: ucsi: Fix a comment in ucsi_init()Subbaraman Narayanamurthy1-1/+1
ucsi_unregister_ppm() got replaced with ucsi_unregister(). Fix the comment in ucsi_init() as well. Reviewed-by: Heikki Krogerus <[email protected]> Signed-off-by: Subbaraman Narayanamurthy <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-10USB: dwc3: remove debugfs root dentry storageGreg Kroah-Hartman3-7/+7
There is no need to keep around the debugfs "root" directory for the dwc3 device. Instead, look it up anytime we need to find it. This will help when callers get out-of-order and we had the potential to have a "stale" pointer around for the root dentry, as has happened in the past. Tested-by: Jack Pham <[email protected]> Reviewed-by: Peter Chen <[email protected]> Acked-by: Felipe Balbi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-10usb: ehci: do not initialise static variablesJason Wang1-2/+2
Global static variables dont need to be initialised manully. Signed-off-by: Jason Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-10Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds10-18/+37
Pull rdma fixes from Jason Gunthorpe: "A mixture of small bug fixes and a small security issue: - WARN_ON when IPoIB is automatically moved between namespaces - Long standing bug where mlx5 would use the wrong page for the doorbell recovery memory if fork is used - Security fix for mlx4 that disables the timestamp feature - Several crashers for mlx5 - Plug a recent mlx5 memory leak for the sig_mr" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/mlx5: Fix initializing CQ fragments buffer RDMA/mlx5: Delete right entry from MR signature database RDMA: Verify port when creating flow rule RDMA/mlx5: Block FDB rules when not in switchdev mode RDMA/mlx4: Do not map the core_clock page to user space unless enabled RDMA/mlx5: Use different doorbell memory for different processes RDMA/ipoib: Fix warning caused by destroying non-initial netns
2021-06-10hwmon: (tps23861) correct shunt LSB valuesRobert Marko1-2/+2
Current shunt LSB values got reversed during in the original driver commit. So, correct the current shunt LSB values according to the datasheet. This caused reading slightly skewed current values. Fixes: fff7b8ab2255 ("hwmon: add Texas Instruments TPS23861 driver") Signed-off-by: Robert Marko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2021-06-10hwmon: (tps23861) set current shunt valueRobert Marko1-0/+12
TPS23861 has a configuration bit for setting of the current shunt value used on the board. Its bit 0 of the General Mask 1 register. According to the datasheet bit values are: 0 for 255 mOhm (Default) 1 for 250 mOhm So, configure the bit before registering the hwmon device according to the value passed in the DTS or default one if none is passed. This caused potentially reading slightly skewed values due to max current value being 1.02A when 250mOhm shunt is used instead of 1.0A when 255mOhm is used. Fixes: fff7b8ab2255 ("hwmon: add Texas Instruments TPS23861 driver") Signed-off-by: Robert Marko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2021-06-10hwmon: (tps23861) define regmap max registerRobert Marko1-0/+1
Define the max register address the device supports. This allows reading the whole register space via regmap debugfs, without it only register 0x0 is visible. This was forgotten in the original driver commit. Fixes: fff7b8ab2255 ("hwmon: add Texas Instruments TPS23861 driver") Signed-off-by: Robert Marko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2021-06-10USB: serial: cp210x: fix CP2102N-A01 modem controlJohan Hovold1-5/+59
CP2102N revision A01 (firmware version <= 1.0.4) has a buggy flow-control implementation that uses the ulXonLimit instead of ulFlowReplace field of the flow-control settings structure (erratum CP2102N_E104). A recent change that set the input software flow-control limits incidentally broke RTS control for these devices when CRTSCTS is not set as the new limits would always enable hardware flow control. Fix this by explicitly disabling flow control for the buggy firmware versions and only updating the input software flow-control limits when IXOFF is requested. This makes sure that the terminal settings matches the default zero ulXonLimit (ulFlowReplace) for these devices. Link: https://lore.kernel.org/r/[email protected] Reported-by: David Frey <[email protected]> Reported-by: Alex Villacís Lasso <[email protected]> Tested-by: Alex Villacís Lasso <[email protected]> Fixes: f61309d9c96a ("USB: serial: cp210x: set IXOFF thresholds") Cc: [email protected] # 5.12 Signed-off-by: Johan Hovold <[email protected]>
2021-06-10drm/msm/dsi: Stash away calculated vco frequency on recalcStephen Boyd2-0/+2
A problem was reported on CoachZ devices where the display wouldn't come up, or it would be distorted. It turns out that the PLL code here wasn't getting called once dsi_pll_10nm_vco_recalc_rate() started returning the same exact frequency, down to the Hz, that the bootloader was setting instead of 0 when the clk was registered with the clk framework. After commit 001d8dc33875 ("drm/msm/dsi: remove temp data from global pll structure") we use a hardcoded value for the parent clk frequency, i.e. VCO_REF_CLK_RATE, and we also hardcode the value for FRAC_BITS, instead of getting it from the config structure. This combination of changes to the recalc function allows us to properly calculate the frequency of the PLL regardless of whether or not the PLL has been clk_prepare()d or clk_set_rate()d. That's a good improvement. Unfortunately, this means that now we won't call down into the PLL clk driver when we call clk_set_rate() because the frequency calculated in the framework matches the frequency that is set in hardware. If the rate is the same as what we want it should be OK to not call the set_rate PLL op. The real problem is that the prepare op in this driver uses a private struct member to stash away the vco frequency so that it can call the set_rate op directly during prepare. Once the set_rate op is never called because recalc_rate told us the rate is the same, we don't set this private struct member before the prepare op runs, so we try to call the set_rate function directly with a frequency of 0. This effectively kills the PLL and configures it for a rate that won't work. Calling set_rate from prepare is really quite bad and will confuse any downstream clks about what the rate actually is of their parent. Fixing that will be a rather large change though so we leave that to later. For now, let's stash away the rate we calculate during recalc so that the prepare op knows what frequency to set, instead of 0. This way things keep working and the display can enable the PLL properly. In the future, we should remove that code from the prepare op so that it doesn't even try to call the set rate function. Cc: Dmitry Baryshkov <[email protected]> Cc: Abhinav Kumar <[email protected]> Fixes: 001d8dc33875 ("drm/msm/dsi: remove temp data from global pll structure") Signed-off-by: Stephen Boyd <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Clark <[email protected]>
2021-06-10IB/mlx5: Fix initializing CQ fragments bufferAlaa Hleihel1-5/+4
The function init_cq_frag_buf() can be called to initialize the current CQ fragments buffer cq->buf, or the temporary cq->resize_buf that is filled during CQ resize operation. However, the offending commit started to use function get_cqe() for getting the CQEs, the issue with this change is that get_cqe() always returns CQEs from cq->buf, which leads us to initialize the wrong buffer, and in case of enlarging the CQ we try to access elements beyond the size of the current cq->buf and eventually hit a kernel panic. [exception RIP: init_cq_frag_buf+103] [ffff9f799ddcbcd8] mlx5_ib_resize_cq at ffffffffc0835d60 [mlx5_ib] [ffff9f799ddcbdb0] ib_resize_cq at ffffffffc05270df [ib_core] [ffff9f799ddcbdc0] llt_rdma_setup_qp at ffffffffc0a6a712 [llt] [ffff9f799ddcbe10] llt_rdma_cc_event_action at ffffffffc0a6b411 [llt] [ffff9f799ddcbe98] llt_rdma_client_conn_thread at ffffffffc0a6bb75 [llt] [ffff9f799ddcbec8] kthread at ffffffffa66c5da1 [ffff9f799ddcbf50] ret_from_fork_nospec_begin at ffffffffa6d95ddd Fix it by getting the needed CQE by calling mlx5_frag_buf_get_wqe() that takes the correct source buffer as a parameter. Fixes: 388ca8be0037 ("IB/mlx5: Implement fragmented completion queue (CQ)") Link: https://lore.kernel.org/r/90a0e8c924093cfa50a482880ad7e7edb73dc19a.1623309971.git.leonro@nvidia.com Signed-off-by: Alaa Hleihel <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-06-10RDMA/mlx5: Delete right entry from MR signature databaseAharon Landau1-2/+2
The value mr->sig is stored in the entry upon mr allocation, however, ibmr is wrongly entered here as "old", therefore, xa_cmpxchg() does not replace the entry with NULL, which leads to the following trace: WARNING: CPU: 28 PID: 2078 at drivers/infiniband/hw/mlx5/main.c:3643 mlx5_ib_stage_init_cleanup+0x4d/0x60 [mlx5_ib] Modules linked in: nvme_rdma nvme_fabrics nvme_core 8021q garp mrp bonding bridge stp llc rfkill rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_tad CPU: 28 PID: 2078 Comm: reboot Tainted: G X --------- --- 5.13.0-0.rc2.19.el9.x86_64 #1 Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 2.9.1 12/07/2018 RIP: 0010:mlx5_ib_stage_init_cleanup+0x4d/0x60 [mlx5_ib] Code: 8d bb 70 1f 00 00 be 00 01 00 00 e8 9d 94 ce da 48 3d 00 01 00 00 75 02 5b c3 0f 0b 5b c3 0f 0b 48 83 bb b0 20 00 00 00 74 d5 <0f> 0b eb d1 4 RSP: 0018:ffffa8db06d33c90 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff97f890a44000 RCX: ffff97f900ec0160 RDX: 0000000000000000 RSI: 0000000080080001 RDI: ffff97f890a44000 RBP: ffffffffc0c189b8 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000300 R12: ffff97f890a44000 R13: ffffffffc0c36030 R14: 00000000fee1dead R15: 0000000000000000 FS: 00007f0d5a8a3b40(0000) GS:ffff98077fb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555acbf4f450 CR3: 00000002a6f56002 CR4: 00000000001706e0 Call Trace: mlx5r_remove+0x39/0x60 [mlx5_ib] auxiliary_bus_remove+0x1b/0x30 __device_release_driver+0x17a/0x230 device_release_driver+0x24/0x30 bus_remove_device+0xdb/0x140 device_del+0x18b/0x3e0 mlx5_detach_device+0x59/0x90 [mlx5_core] mlx5_unload_one+0x22/0x60 [mlx5_core] shutdown+0x31/0x3a [mlx5_core] pci_device_shutdown+0x34/0x60 device_shutdown+0x15b/0x1c0 __do_sys_reboot.cold+0x2f/0x5b ? vfs_writev+0xc7/0x140 ? handle_mm_fault+0xc5/0x290 ? do_writev+0x6b/0x110 do_syscall_64+0x40/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: e6fb246ccafb ("RDMA/mlx5: Consolidate MR destruction to mlx5_ib_dereg_mr()") Link: https://lore.kernel.org/r/f3f585ea0db59c2a78f94f65eedeafc5a2374993.1623309971.git.leonro@nvidia.com Signed-off-by: Aharon Landau <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-06-10RDMA: Verify port when creating flow ruleMaor Gottlieb3-6/+7
Validate port value provided by the user and with that remove no longer needed validation by the driver. The missing check in the mlx5_ib driver could cause to the below oops. Call trace: _create_flow_rule+0x2d4/0xf28 [mlx5_ib] mlx5_ib_create_flow+0x2d0/0x5b0 [mlx5_ib] ib_uverbs_ex_create_flow+0x4cc/0x624 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xd4/0x150 [ib_uverbs] ib_uverbs_cmd_verbs.isra.7+0xb28/0xc50 [ib_uverbs] ib_uverbs_ioctl+0x158/0x1d0 [ib_uverbs] do_vfs_ioctl+0xd0/0xaf0 ksys_ioctl+0x84/0xb4 __arm64_sys_ioctl+0x28/0xc4 el0_svc_common.constprop.3+0xa4/0x254 el0_svc_handler+0x84/0xa0 el0_svc+0x10/0x26c Code: b9401260 f9615681 51000400 8b001c20 (f9403c1a) Fixes: 436f2ad05a0b ("IB/core: Export ib_create/destroy_flow through uverbs") Link: https://lore.kernel.org/r/faad30dc5219a01727f47db3dc2f029d07c82c00.1623309971.git.leonro@nvidia.com Reviewed-by: Mark Bloch <[email protected]> Signed-off-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-06-10drm: Lock pointer access in drm_master_release()Desmond Cheong Zhi Xi1-1/+2
This patch eliminates the following smatch warning: drivers/gpu/drm/drm_auth.c:320 drm_master_release() warn: unlocked access 'master' (line 318) expected lock '&dev->master_mutex' The 'file_priv->master' field should be protected by the mutex lock to '&dev->master_mutex'. This is because other processes can concurrently modify this field and free the current 'file_priv->master' pointer. This could result in a use-after-free error when 'master' is dereferenced in subsequent function calls to 'drm_legacy_lock_master_cleanup()' or to 'drm_lease_revoke()'. An example of a scenario that would produce this error can be seen from a similar bug in 'drm_getunique()' that was reported by Syzbot: https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803 In the Syzbot report, another process concurrently acquired the device's master mutex in 'drm_setmaster_ioctl()', then overwrote 'fpriv->master' in 'drm_new_set_master()'. The old value of 'fpriv->master' was subsequently freed before the mutex was unlocked. Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Desmond Cheong Zhi Xi <[email protected]> Cc: [email protected] Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-06-10USB: serial: cp210x: fix alternate function for CP2102N QFN20Stefan Agner1-1/+19
The QFN20 part has a different GPIO/port function assignment. The configuration struct bit field ordered as TX/RX/RS485/WAKEUP/CLK which exactly matches GPIO0-3 for QFN24/28. However, QFN20 has a different GPIO to primary function assignment. Special case QFN20 to follow to properly detect which GPIOs are available. Signed-off-by: Stefan Agner <[email protected]> Link: https://lore.kernel.org/r/51830b2b24118eb0f77c5c9ac64ffb2f519dbb1d.1622218300.git.stefan@agner.ch Fixes: c8acfe0aadbe ("USB: serial: cp210x: implement GPIO support for CP2102N") Cc: [email protected] # 4.19 Signed-off-by: Johan Hovold <[email protected]>
2021-06-09Merge tag 'platform-drivers-x86-v5.13-3' of ↵Linus Torvalds5-5/+10
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Assorted pdx86 bug-fixes and some hardware-id additions for 5.13. The mlxreg-hotplug revert is a regression-fix" * tag 'platform-drivers-x86-v5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/mellanox: mlxreg-hotplug: Revert "move to use request_irq by IRQF_NO_AUTOEN flag" platform/surface: dtx: Add missing mutex_destroy() call in failure path platform/surface: aggregator: Fix event disable function platform/x86: thinkpad_acpi: Add X1 Carbon Gen 9 second fan support platform/surface: aggregator_registry: Add support for 13" Intel Surface Laptop 4 platform/surface: aggregator_registry: Update comments for 15" AMD Surface Laptop 4
2021-06-09hwmon: (scpi-hwmon) shows the negative temperature properlyRiwen Lu1-0/+9
The scpi hwmon shows the sub-zero temperature in an unsigned integer, which would confuse the users when the machine works in low temperature environment. This shows the sub-zero temperature in an signed value and users can get it properly from sensors. Signed-off-by: Riwen Lu <[email protected]> Tested-by: Xin Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2021-06-09hwmon: (corsair-psu) fix suspend behaviorWilken Gottwalt1-0/+14
During standby some PSUs turn off the microcontroller. A re-init is required during resume or the microcontroller stays unresponsive. Fixes: d115b51e0e56 ("hwmon: add Corsair PSU HID controller driver") Signed-off-by: Wilken Gottwalt <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2021-06-09misc: rtsx: separate aspm mode into MODE_REG and MODE_CFGRicky Wu9-13/+42
aspm (Active State Power Management) rtsx_comm_set_aspm: this function is for driver to make sure not enter power saving when processing of init and card_detcct ASPM_MODE_CFG: 8411 5209 5227 5229 5249 5250 Change back to use original way to control aspm ASPM_MODE_REG: 5227A 524A 5250A 5260 5261 5228 Keep the new way to control aspm Fixes: 121e9c6b5c4c ("misc: rtsx: modify and fix init_hw function") Reported-by: Chris Chiu <[email protected]> Tested-by: Gordon Lack <[email protected]> Cc: stable <[email protected]> Signed-off-by: Ricky Wu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09bus: mhi: pci-generic: Fix hibernationLoic Poulain1-1/+35
This patch fixes crash after resuming from hibernation. The issue occurs when mhi stack is builtin and so part of the 'restore-kernel', causing the device to be resumed from 'restored kernel' with a no more valid context (memory mappings etc...) and leading to spurious crashes. This patch fixes the issue by implementing proper freeze/restore callbacks. Link: https://lore.kernel.org/r/[email protected] Reported-by: Shujun Wang <[email protected]> Cc: stable <[email protected]> Reviewed-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Loic Poulain <[email protected]> Signed-off-by: Manivannan Sadhasivam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09bus: mhi: pci_generic: Fix possible use-after-free in mhi_pci_remove()Wei Yongjun1-1/+1
This driver's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. Link: https://lore.kernel.org/r/[email protected] Fixes: 8562d4fe34a3 ("mhi: pci_generic: Add health-check") Cc: stable <[email protected]> Reported-by: Hulk Robot <[email protected]> Reviewed-by: Hemant kumar <[email protected]> Reviewed-by: Manivannan Sadhasivam <[email protected]> Reviewed-by: Loic Poulain <[email protected]> Signed-off-by: Wei Yongjun <[email protected]> Signed-off-by: Manivannan Sadhasivam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09bus: mhi: pci_generic: T99W175: update channel name from AT to DUNJarvis Jiang1-2/+2
According to MHI v1.1 specification, change the channel name of T99W175 from "AT" to "DUN" (Dial-up networking) for both channel 32 and 33, so that the channels can be bound to the Qcom WWAN control driver, and device node such as /dev/wwan0p3DUN will be generated, which is very useful for debugging modem Link: https://lore.kernel.org/r/[email protected] [mani: changed the dev node to /dev/wwan0p3DUN] Fixes: aac426562f56 ("bus: mhi: pci_generic: Introduce Foxconn T99W175 support") Reviewed-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Jarvis Jiang <[email protected]> Signed-off-by: Manivannan Sadhasivam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09serial: 8250_exar: Avoid NULL pointer dereference at ->exit()Andy Shevchenko1-1/+5
It's possible that during ->exit() the private_data is NULL, for instance when there was no GPIO device instantiated. Due to this we may not dereference it. Add a respective check. Note, for now ->exit() only makes sense when GPIO device was instantiated, that's why we may use the check for entire function. Fixes: 81171e7d31a6 ("serial: 8250_exar: Constify the software nodes") Reported-by: Maxim Levitsky <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Tested-by: Maxim Levitsky <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09ACPI: Pass the same capabilities to the _OSC regardless of the query flagMika Westerberg1-19/+8
Commit 719e1f561afb ("ACPI: Execute platform _OSC also with query bit clear") makes acpi_bus_osc_negotiate_platform_control() not only query the platforms capabilities but it also commits the result back to the firmware to report which capabilities are supported by the OS back to the firmware On certain systems the BIOS loads SSDT tables dynamically based on the capabilities the OS claims to support. However, on these systems the _OSC actually clears some of the bits (under certain conditions) so what happens is that now when we call the _OSC twice the second time we pass the cleared values and that results errors like below to appear on the system log: ACPI BIOS Error (bug): Could not resolve symbol [\_PR.PR00._CPC], AE_NOT_FOUND (20210105/psargs-330) ACPI Error: Aborting method \_PR.PR01._CPC due to previous error (AE_NOT_FOUND) (20210105/psparse-529) In addition the ACPI 6.4 spec says following [1]: If the OS declares support of a feature in the Support Field in one call to _OSC, then it must preserve the set state of that bit (declaring support for that feature) in all subsequent calls. Based on the above we can fix the issue by passing the same set of capabilities to the platform wide _OSC in both calls regardless of the query flag. While there drop the context.ret.length checks which were wrong to begin with (as the length is number of bytes not elements). This is already checked in acpi_run_osc() that also returns an error in that case. Includes fixes by Hans de Goede. [1] https://uefi.org/specs/ACPI/6.4/06_Device_Configuration/Device_Configuration.html#sequence-of-osc-calls BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213023 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1963717 Fixes: 719e1f561afb ("ACPI: Execute platform _OSC also with query bit clear") Cc: 5.12+ <[email protected]> # 5.12+ Signed-off-by: Mika Westerberg <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2021-06-09drm/mcde: Fix off by 10^3 in calculationLinus Walleij1-1/+1
The calclulation of how many bytes we stuff into the DSI pipeline for video mode panels is off by three orders of magnitude because we did not account for the fact that the DRM mode clock is in kilohertz rather than hertz. This used to be: drm_mode_vrefresh(mode) * mode->htotal * mode->vtotal which would become for example for s6e63m0: 60 x 514 x 831 = 25628040 Hz, but mode->clock is 25628 as it is in kHz. This affects only the Samsung GT-I8190 "Golden" phone right now since it is the only MCDE device with a video mode display. Curiously some specimen work with this code and wild settings in the EOL and empty packets at the end of the display, but I have noticed an eeire flicker until now. Others were not so lucky and got black screens. Cc: Ville Syrjälä <[email protected]> Reported-by: Stephan Gerhold <[email protected]> Fixes: 920dd1b1425b ("drm/mcde: Use mode->clock instead of reverse calculating it from the vrefresh") Signed-off-by: Linus Walleij <[email protected]> Tested-by: Stephan Gerhold <[email protected]> Reviewed-by: Stephan Gerhold <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-06-09pinctrl: qcom: Make it possible to select SC8180x TLMMBjorn Andersson1-1/+1
It's currently not possible to select the SC8180x TLMM driver, due to it selecting PINCTRL_MSM, rather than depending on the same. Fix this. Fixes: 97423113ec4b ("pinctrl: qcom: Add sc8180x TLMM driver") Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2021-06-09staging: ralink-gdma: Remove incorrect author informationLars-Peter Clausen1-2/+0
Lars did not write the ralink-gdma driver. Looks like his name just got copy&pasted from another similar DMA driver. Remove his name from the copyright and MODULE_AUTHOR. Signed-off-by: Lars-Peter Clausen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09staging: rtl8723bs: Fix uninitialized variablesWenli Looi1-1/+1
The sinfo.pertid and sinfo.generation variables are not initialized and it causes a crash when we use this as a wireless access point. [ 456.873025] ------------[ cut here ]------------ [ 456.878198] kernel BUG at mm/slub.c:3968! [ 456.882680] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ snip ] [ 457.271004] Backtrace: [ 457.273733] [<c02b7ee4>] (kfree) from [<c0e2a470>] (nl80211_send_station+0x954/0xfc4) [ 457.282481] r9:eccca0c0 r8:e8edfec0 r7:00000000 r6:00000011 r5:e80a9480 r4:e8edfe00 [ 457.291132] [<c0e29b1c>] (nl80211_send_station) from [<c0e2b18c>] (cfg80211_new_sta+0x90/0x1cc) [ 457.300850] r10:e80a9480 r9:e8edfe00 r8:ea678cca r7:00000a20 r6:00000000 r5:ec46d000 [ 457.309586] r4:ec46d9e0 [ 457.312433] [<c0e2b0fc>] (cfg80211_new_sta) from [<bf086684>] (rtw_cfg80211_indicate_sta_assoc+0x80/0x9c [r8723bs]) [ 457.324095] r10:00009930 r9:e85b9d80 r8:bf091050 r7:00000000 r6:00000000 r5:0000001c [ 457.332831] r4:c1606788 [ 457.335692] [<bf086604>] (rtw_cfg80211_indicate_sta_assoc [r8723bs]) from [<bf03df38>] (rtw_stassoc_event_callback+0x1c8/0x1d4 [r8723bs]) [ 457.349489] r7:ea678cc0 r6:000000a1 r5:f1225f84 r4:f086b000 [ 457.355845] [<bf03dd70>] (rtw_stassoc_event_callback [r8723bs]) from [<bf048e4c>] (mlme_evt_hdl+0x8c/0xb4 [r8723bs]) [ 457.367601] r7:c1604900 r6:f086c4b8 r5:00000000 r4:f086c000 [ 457.373959] [<bf048dc0>] (mlme_evt_hdl [r8723bs]) from [<bf03693c>] (rtw_cmd_thread+0x198/0x3d8 [r8723bs]) [ 457.384744] r5:f086e000 r4:f086c000 [ 457.388754] [<bf0367a4>] (rtw_cmd_thread [r8723bs]) from [<c014a214>] (kthread+0x170/0x174) [ 457.398083] r10:ed7a57e8 r9:bf0367a4 r8:f086b000 r7:e8ede000 r6:00000000 r5:e9975200 [ 457.406828] r4:e8369900 [ 457.409653] [<c014a0a4>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) [ 457.417718] Exception stack(0xe8edffb0 to 0xe8edfff8) [ 457.423356] ffa0: 00000000 00000000 00000000 00000000 [ 457.432492] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 457.441618] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 457.449006] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c014a0a4 [ 457.457750] r4:e9975200 [ 457.460574] Code: 1a000003 e5953004 e3130001 1a000000 (e7f001f2) [ 457.467381] ---[ end trace 4acbc8c15e9e6aa7 ]--- Link: https://forum.armbian.com/topic/14727-wifi-ap-kernel-bug-in-kernel-5444/ Fixes: 8689c051a201 ("cfg80211: dynamically allocate per-tid stats for station info") Fixes: f5ea9120be2e ("nl80211: add generation number to all dumps") Signed-off-by: Wenli Looi <[email protected]> Reviewed-by: Dan Carpenter <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09usb: gadget: u_audio: add real feedback implementationRuslan Bilovol4-10/+134
This adds interface between userspace and feedback endpoint to report real feedback frequency to the Host. Current implementation adds new userspace interface ALSA mixer control "Capture Pitch 1000000" (similar to aloop driver's "PCM Rate Shift 100000" mixer control) Value in PPM is chosen to have correction value agnostic of the actual HW rate, which the application is not necessarily dealing with, while still retaining a good enough precision to allow smooth clock correction on the playback side, if necessary. Similar to sound/usb/endpoint.c, a slow down is allowed up to 25%. This has no impact on the required bandwidth. Speedup correction has an impact on the bandwidth reserved for the isochronous endpoint. The default allowed speedup is 500ppm. This seems to be more than enough but, if necessary, this is configurable through a module parameter. The reserved bandwidth is rounded up to the next packet size. Usage of this new control is easy to implement in existing userspace tools like alsaloop from alsa-utils. Signed-off-by: Ruslan Bilovol <[email protected]> Signed-off-by: Jerome Brunet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09usb: gadget: f_uac2: add adaptive sync support for captureRuslan Bilovol2-9/+93
Current f_uac2 USB OUT (aka 'capture') synchronization implements 'ASYNC' scenario which means USB Gadget has it's own freerunning clock and can update Host about real clock frequency through feedback endpoint so Host can align number of samples sent to the USB gadget to prevent overruns/underruns In case if Gadget can has no it's internal clock and can consume audio samples at any rate (for example, on the Gadget side someone records audio directly to a file, or audio samples are played through an external DAC as soon as they arrive), UAC2 spec suggests 'ADAPTIVE' synchronization type. Change UAC2 driver to make it configurable through additional 'c_sync' configfs file. Default remains 'asynchronous' with possibility to switch it to 'adaptive' Signed-off-by: Ruslan Bilovol <[email protected]> Signed-off-by: Jerome Brunet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09usb: gadget: f_uac2/u_audio: add feedback endpoint supportRuslan Bilovol3-3/+168
As per USB and UAC2 specs, asynchronous audio sink endpoint requires explicit synchronization mechanism (Isochronous Feedback Endpoint) Implement feedback companion endpoint for ISO OUT endpoint This patch adds all required infrastructure and USB requests handling for feedback endpoint. Syncrhonization itself is still dummy (feedback ep always reports 'nomimal frequency' e.g. no adjustement is needed). This satisfies hosts that require feedback endpoint (like Win10) and poll it periodically Actual synchronization mechanism should be implemented separately Signed-off-by: Ruslan Bilovol <[email protected]> Signed-off-by: Jerome Brunet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09usb: dwc2: Don't reset the core after setting turnaround timeClément Lassieur1-9/+21
Every time the hub signals a reset while we (device) are hsotg->connected, dwc2_hsotg_core_init_disconnected() is called, which in turn calls dwc2_hs_phy_init(). GUSBCFG.USBTrdTim is cleared upon Core Soft Reset, so if hsotg->params.phy_utmi_width is 8-bit, the value of GUSBCFG.USBTrdTim (the default one: 0x5, corresponding to 16-bit) is always different from hsotg->params.phy_utmi_width, thus dwc2_core_reset() is called every time (usbcfg != usbcfg_old), which causes 2 issues: 1) The call to dwc2_core_reset() does another reset 300us after the initial Chirp K of the first reset (which should last at least Tuch = 1ms), and messes up the High-speed Detection Handshake: both hub and device drive current into the D+ and D- lines at the same time. 2) GUSBCFG.USBTrdTim is cleared by the second reset, so its value is always the default one (0x5). Setting GUSBCFG.USBTrdTim after the potential call to dwc2_core_reset() fixes both issues. It is now set even when select_phy is false because the cost of the Core Soft Reset is removed. Fixes: 1e868545f2bb ("usb: dwc2: gadget: Move gadget phy init into core phy init") Signed-off-by: Clément Lassieur <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09usb: gadget: f_fs: Fix setting of device and driver data cross-referencesAndrew Gabbasov1-33/+32
FunctionFS device structure 'struct ffs_dev' and driver data structure 'struct ffs_data' are bound to each other with cross-reference pointers 'ffs_data->private_data' and 'ffs_dev->ffs_data'. While the first one is supposed to be valid through the whole life of 'struct ffs_data' (and while 'struct ffs_dev' exists non-freed), the second one is cleared in 'ffs_closed()' (called from 'ffs_data_reset()' or the last 'ffs_data_put()'). This can be called several times, alternating in different order with 'ffs_free_inst()', that, if possible, clears the other cross-reference. As a result, different cases of these calls order may leave stale cross-reference pointers, used when the pointed structure is already freed. Even if it occasionally doesn't cause kernel crash, this error is reported by KASAN-enabled kernel configuration. For example, the case [last 'ffs_data_put()' - 'ffs_free_inst()'] was fixed by commit cdafb6d8b8da ("usb: gadget: f_fs: Fix use-after-free in ffs_free_inst"). The other case ['ffs_data_reset()' - 'ffs_free_inst()' - 'ffs_data_put()'] now causes KASAN reported error [1], when 'ffs_data_reset()' clears 'ffs_dev->ffs_data', then 'ffs_free_inst()' frees the 'struct ffs_dev', but can't clear 'ffs_data->private_data', which is then accessed in 'ffs_closed()' called from 'ffs_data_put()'. This happens since 'ffs_dev->ffs_data' reference is cleared too early. Moreover, one more use case, when 'ffs_free_inst()' is called immediately after mounting FunctionFS device (that is before the descriptors are written and 'ffs_ready()' is called), and then 'ffs_data_reset()' or 'ffs_data_put()' is called from accessing "ep0" file or unmounting the device. This causes KASAN error report like [2], since 'ffs_dev->ffs_data' is not yet set when 'ffs_free_inst()' can't properly clear 'ffs_data->private_data', that is later accessed to freed structure. Fix these (and may be other) cases of stale pointers access by moving setting and clearing of the mentioned cross-references to the single places, setting both of them when 'struct ffs_data' is created and bound to 'struct ffs_dev', and clearing both of them when one of the structures is destroyed. It seems convenient to make this pointer initialization and structures binding in 'ffs_acquire_dev()' and make pointers clearing in 'ffs_release_dev()'. This required some changes in these functions parameters and return types. Also, 'ffs_release_dev()' calling requires some cleanup, fixing minor issues, like (1) 'ffs_release_dev()' is not called if 'ffs_free_inst()' is called without unmounting the device, and "release_dev" callback is not called at all, or (2) "release_dev" callback is called before "ffs_closed" callback on unmounting, which seems to be not correctly nested with "acquire_dev" and "ffs_ready" callbacks. Make this cleanup togther with other mentioned 'ffs_release_dev()' changes. [1] ================================================================== root@rcar-gen3:~# mkdir /dev/cfs root@rcar-gen3:~# mkdir /dev/ffs root@rcar-gen3:~# modprobe libcomposite root@rcar-gen3:~# mount -t configfs none /dev/cfs root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1 root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs [ 64.340664] file system registered root@rcar-gen3:~# mount -t functionfs ffs /dev/ffs root@rcar-gen3:~# cd /dev/ffs root@rcar-gen3:/dev/ffs# /home/root/ffs-test ffs-test: info: ep0: writing descriptors (in v2 format) [ 83.181442] read descriptors [ 83.186085] read strings ffs-test: info: ep0: writing strings ffs-test: dbg: ep1: starting ffs-test: dbg: ep2: starting ffs-test: info: ep1: starts ffs-test: info: ep2: starts ffs-test: info: ep0: starts ^C root@rcar-gen3:/dev/ffs# cd /home/root/ root@rcar-gen3:~# rmdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs [ 98.935061] unloading root@rcar-gen3:~# umount /dev/ffs [ 102.734301] ================================================================== [ 102.742059] BUG: KASAN: use-after-free in ffs_release_dev+0x64/0xa8 [usb_f_fs] [ 102.749683] Write of size 1 at addr ffff0004d46ff549 by task umount/2997 [ 102.756709] [ 102.758311] CPU: 0 PID: 2997 Comm: umount Not tainted 5.13.0-rc4+ #8 [ 102.764971] Hardware name: Renesas Salvator-X board based on r8a77951 (DT) [ 102.772179] Call trace: [ 102.774779] dump_backtrace+0x0/0x330 [ 102.778653] show_stack+0x20/0x2c [ 102.782152] dump_stack+0x11c/0x1ac [ 102.785833] print_address_description.constprop.0+0x30/0x274 [ 102.791862] kasan_report+0x14c/0x1c8 [ 102.795719] __asan_report_store1_noabort+0x34/0x58 [ 102.800840] ffs_release_dev+0x64/0xa8 [usb_f_fs] [ 102.805801] ffs_fs_kill_sb+0x50/0x84 [usb_f_fs] [ 102.810663] deactivate_locked_super+0xa0/0xf0 [ 102.815339] deactivate_super+0x98/0xac [ 102.819378] cleanup_mnt+0xd0/0x1b0 [ 102.823057] __cleanup_mnt+0x1c/0x28 [ 102.826823] task_work_run+0x104/0x180 [ 102.830774] do_notify_resume+0x458/0x14e0 [ 102.835083] work_pending+0xc/0x5f8 [ 102.838762] [ 102.840357] Allocated by task 2988: [ 102.844032] kasan_save_stack+0x28/0x58 [ 102.848071] kasan_set_track+0x28/0x3c [ 102.852016] ____kasan_kmalloc+0x84/0x9c [ 102.856142] __kasan_kmalloc+0x10/0x1c [ 102.860088] __kmalloc+0x214/0x2f8 [ 102.863678] kzalloc.constprop.0+0x14/0x20 [usb_f_fs] [ 102.868990] ffs_alloc_inst+0x8c/0x208 [usb_f_fs] [ 102.873942] try_get_usb_function_instance+0xf0/0x164 [libcomposite] [ 102.880629] usb_get_function_instance+0x64/0x68 [libcomposite] [ 102.886858] function_make+0x128/0x1ec [libcomposite] [ 102.892185] configfs_mkdir+0x330/0x590 [configfs] [ 102.897245] vfs_mkdir+0x12c/0x1bc [ 102.900835] do_mkdirat+0x180/0x1d0 [ 102.904513] __arm64_sys_mkdirat+0x80/0x94 [ 102.908822] invoke_syscall+0xf8/0x25c [ 102.912772] el0_svc_common.constprop.0+0x150/0x1a0 [ 102.917891] do_el0_svc+0xa0/0xd4 [ 102.921386] el0_svc+0x24/0x34 [ 102.924613] el0_sync_handler+0xcc/0x154 [ 102.928743] el0_sync+0x198/0x1c0 [ 102.932238] [ 102.933832] Freed by task 2996: [ 102.937144] kasan_save_stack+0x28/0x58 [ 102.941181] kasan_set_track+0x28/0x3c [ 102.945128] kasan_set_free_info+0x28/0x4c [ 102.949435] ____kasan_slab_free+0x104/0x118 [ 102.953921] __kasan_slab_free+0x18/0x24 [ 102.958047] slab_free_freelist_hook+0x148/0x1f0 [ 102.962897] kfree+0x318/0x440 [ 102.966123] ffs_free_inst+0x164/0x2d8 [usb_f_fs] [ 102.971075] usb_put_function_instance+0x84/0xa4 [libcomposite] [ 102.977302] ffs_attr_release+0x18/0x24 [usb_f_fs] [ 102.982344] config_item_put+0x140/0x1a4 [configfs] [ 102.987486] configfs_rmdir+0x3fc/0x518 [configfs] [ 102.992535] vfs_rmdir+0x114/0x234 [ 102.996122] do_rmdir+0x274/0x2b0 [ 102.999617] __arm64_sys_unlinkat+0x94/0xc8 [ 103.004015] invoke_syscall+0xf8/0x25c [ 103.007961] el0_svc_common.constprop.0+0x150/0x1a0 [ 103.013080] do_el0_svc+0xa0/0xd4 [ 103.016575] el0_svc+0x24/0x34 [ 103.019801] el0_sync_handler+0xcc/0x154 [ 103.023930] el0_sync+0x198/0x1c0 [ 103.027426] [ 103.029020] The buggy address belongs to the object at ffff0004d46ff500 [ 103.029020] which belongs to the cache kmalloc-128 of size 128 [ 103.042079] The buggy address is located 73 bytes inside of [ 103.042079] 128-byte region [ffff0004d46ff500, ffff0004d46ff580) [ 103.054236] The buggy address belongs to the page: [ 103.059262] page:0000000021aa849b refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff0004d46fee00 pfn:0x5146fe [ 103.070437] head:0000000021aa849b order:1 compound_mapcount:0 [ 103.076456] flags: 0x8000000000010200(slab|head|zone=2) [ 103.081948] raw: 8000000000010200 fffffc0013521a80 0000000d0000000d ffff0004c0002300 [ 103.090052] raw: ffff0004d46fee00 000000008020001e 00000001ffffffff 0000000000000000 [ 103.098150] page dumped because: kasan: bad access detected [ 103.103985] [ 103.105578] Memory state around the buggy address: [ 103.110602] ffff0004d46ff400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 103.118161] ffff0004d46ff480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 103.125726] >ffff0004d46ff500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 103.133284] ^ [ 103.139120] ffff0004d46ff580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 103.146679] ffff0004d46ff600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 103.154238] ================================================================== [ 103.161792] Disabling lock debugging due to kernel taint [ 103.167319] Unable to handle kernel paging request at virtual address 0037801d6000018e [ 103.175406] Mem abort info: [ 103.178457] ESR = 0x96000004 [ 103.181609] EC = 0x25: DABT (current EL), IL = 32 bits [ 103.187020] SET = 0, FnV = 0 [ 103.190185] EA = 0, S1PTW = 0 [ 103.193417] Data abort info: [ 103.196385] ISV = 0, ISS = 0x00000004 [ 103.200315] CM = 0, WnR = 0 [ 103.203366] [0037801d6000018e] address between user and kernel address ranges [ 103.210611] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 103.216231] Modules linked in: usb_f_fs libcomposite configfs ath9k_htc led_class mac80211 libarc4 ath9k_common ath9k_hw ath cfg80211 aes_ce_blk sata_rc4 [ 103.259233] CPU: 0 PID: 2997 Comm: umount Tainted: G B 5.13.0-rc4+ #8 [ 103.267031] Hardware name: Renesas Salvator-X board based on r8a77951 (DT) [ 103.273951] pstate: 00000005 (nzcv daif -PAN -UAO -TCO BTYPE=--) [ 103.280001] pc : ffs_data_clear+0x138/0x370 [usb_f_fs] [ 103.285197] lr : ffs_data_clear+0x124/0x370 [usb_f_fs] [ 103.290385] sp : ffff800014777a80 [ 103.293725] x29: ffff800014777a80 x28: ffff0004d7649c80 x27: 0000000000000000 [ 103.300931] x26: ffff800014777fb0 x25: ffff60009aec9394 x24: ffff0004d7649ca4 [ 103.308136] x23: 1fffe0009a3d063a x22: dfff800000000000 x21: ffff0004d1e831d0 [ 103.315340] x20: e1c000eb00000bb4 x19: ffff0004d1e83000 x18: 0000000000000000 [ 103.322545] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 103.329748] x14: 0720072007200720 x13: 0720072007200720 x12: 1ffff000012ef658 [ 103.336952] x11: ffff7000012ef658 x10: 0720072007200720 x9 : ffff800011322648 [ 103.344157] x8 : ffff800014777818 x7 : ffff80000977b2c7 x6 : 0000000000000000 [ 103.351359] x5 : 0000000000000001 x4 : ffff7000012ef659 x3 : 0000000000000001 [ 103.358562] x2 : 0000000000000000 x1 : 1c38001d6000018e x0 : e1c000eb00000c70 [ 103.365766] Call trace: [ 103.368235] ffs_data_clear+0x138/0x370 [usb_f_fs] [ 103.373076] ffs_data_reset+0x20/0x304 [usb_f_fs] [ 103.377829] ffs_data_closed+0x1ec/0x244 [usb_f_fs] [ 103.382755] ffs_fs_kill_sb+0x70/0x84 [usb_f_fs] [ 103.387420] deactivate_locked_super+0xa0/0xf0 [ 103.391905] deactivate_super+0x98/0xac [ 103.395776] cleanup_mnt+0xd0/0x1b0 [ 103.399299] __cleanup_mnt+0x1c/0x28 [ 103.402906] task_work_run+0x104/0x180 [ 103.406691] do_notify_resume+0x458/0x14e0 [ 103.410823] work_pending+0xc/0x5f8 [ 103.414351] Code: b4000a54 9102f280 12000802 d343fc01 (38f66821) [ 103.420490] ---[ end trace 57b43a50e8244f57 ]--- Segmentation fault root@rcar-gen3:~# ================================================================== [2] ================================================================== root@rcar-gen3:~# mkdir /dev/ffs root@rcar-gen3:~# modprobe libcomposite root@rcar-gen3:~# root@rcar-gen3:~# mount -t configfs none /dev/cfs root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1 root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs [ 54.766480] file system registered root@rcar-gen3:~# mount -t functionfs ffs /dev/ffs root@rcar-gen3:~# rmdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs [ 63.197597] unloading root@rcar-gen3:~# cat /dev/ffs/ep0 cat: read error:[ 67.213506] ================================================================== [ 67.222095] BUG: KASAN: use-after-free in ffs_data_clear+0x70/0x370 [usb_f_fs] [ 67.229699] Write of size 1 at addr ffff0004c26e974a by task cat/2994 [ 67.236446] [ 67.238045] CPU: 0 PID: 2994 Comm: cat Not tainted 5.13.0-rc4+ #8 [ 67.244431] Hardware name: Renesas Salvator-X board based on r8a77951 (DT) [ 67.251624] Call trace: [ 67.254212] dump_backtrace+0x0/0x330 [ 67.258081] show_stack+0x20/0x2c [ 67.261579] dump_stack+0x11c/0x1ac [ 67.265260] print_address_description.constprop.0+0x30/0x274 [ 67.271286] kasan_report+0x14c/0x1c8 [ 67.275143] __asan_report_store1_noabort+0x34/0x58 [ 67.280265] ffs_data_clear+0x70/0x370 [usb_f_fs] [ 67.285220] ffs_data_reset+0x20/0x304 [usb_f_fs] [ 67.290172] ffs_data_closed+0x240/0x244 [usb_f_fs] [ 67.295305] ffs_ep0_release+0x40/0x54 [usb_f_fs] [ 67.300256] __fput+0x304/0x580 [ 67.303576] ____fput+0x18/0x24 [ 67.306893] task_work_run+0x104/0x180 [ 67.310846] do_notify_resume+0x458/0x14e0 [ 67.315154] work_pending+0xc/0x5f8 [ 67.318834] [ 67.320429] Allocated by task 2988: [ 67.324105] kasan_save_stack+0x28/0x58 [ 67.328144] kasan_set_track+0x28/0x3c [ 67.332090] ____kasan_kmalloc+0x84/0x9c [ 67.336217] __kasan_kmalloc+0x10/0x1c [ 67.340163] __kmalloc+0x214/0x2f8 [ 67.343754] kzalloc.constprop.0+0x14/0x20 [usb_f_fs] [ 67.349066] ffs_alloc_inst+0x8c/0x208 [usb_f_fs] [ 67.354017] try_get_usb_function_instance+0xf0/0x164 [libcomposite] [ 67.360705] usb_get_function_instance+0x64/0x68 [libcomposite] [ 67.366934] function_make+0x128/0x1ec [libcomposite] [ 67.372260] configfs_mkdir+0x330/0x590 [configfs] [ 67.377320] vfs_mkdir+0x12c/0x1bc [ 67.380911] do_mkdirat+0x180/0x1d0 [ 67.384589] __arm64_sys_mkdirat+0x80/0x94 [ 67.388899] invoke_syscall+0xf8/0x25c [ 67.392850] el0_svc_common.constprop.0+0x150/0x1a0 [ 67.397969] do_el0_svc+0xa0/0xd4 [ 67.401464] el0_svc+0x24/0x34 [ 67.404691] el0_sync_handler+0xcc/0x154 [ 67.408819] el0_sync+0x198/0x1c0 [ 67.412315] [ 67.413909] Freed by task 2993: [ 67.417220] kasan_save_stack+0x28/0x58 [ 67.421257] kasan_set_track+0x28/0x3c [ 67.425204] kasan_set_free_info+0x28/0x4c [ 67.429513] ____kasan_slab_free+0x104/0x118 [ 67.434001] __kasan_slab_free+0x18/0x24 [ 67.438128] slab_free_freelist_hook+0x148/0x1f0 [ 67.442978] kfree+0x318/0x440 [ 67.446205] ffs_free_inst+0x164/0x2d8 [usb_f_fs] [ 67.451156] usb_put_function_instance+0x84/0xa4 [libcomposite] [ 67.457385] ffs_attr_release+0x18/0x24 [usb_f_fs] [ 67.462428] config_item_put+0x140/0x1a4 [configfs] [ 67.467570] configfs_rmdir+0x3fc/0x518 [configfs] [ 67.472626] vfs_rmdir+0x114/0x234 [ 67.476215] do_rmdir+0x274/0x2b0 [ 67.479710] __arm64_sys_unlinkat+0x94/0xc8 [ 67.484108] invoke_syscall+0xf8/0x25c [ 67.488055] el0_svc_common.constprop.0+0x150/0x1a0 [ 67.493175] do_el0_svc+0xa0/0xd4 [ 67.496671] el0_svc+0x24/0x34 [ 67.499896] el0_sync_handler+0xcc/0x154 [ 67.504024] el0_sync+0x198/0x1c0 [ 67.507520] [ 67.509114] The buggy address belongs to the object at ffff0004c26e9700 [ 67.509114] which belongs to the cache kmalloc-128 of size 128 [ 67.522171] The buggy address is located 74 bytes inside of [ 67.522171] 128-byte region [ffff0004c26e9700, ffff0004c26e9780) [ 67.534328] The buggy address belongs to the page: [ 67.539355] page:000000003177a217 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x5026e8 [ 67.549175] head:000000003177a217 order:1 compound_mapcount:0 [ 67.555195] flags: 0x8000000000010200(slab|head|zone=2) [ 67.560687] raw: 8000000000010200 fffffc0013037100 0000000c00000002 ffff0004c0002300 [ 67.568791] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 [ 67.576890] page dumped because: kasan: bad access detected [ 67.582725] [ 67.584318] Memory state around the buggy address: [ 67.589343] ffff0004c26e9600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 67.596903] ffff0004c26e9680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 67.604463] >ffff0004c26e9700: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 67.612022] ^ [ 67.617860] ffff0004c26e9780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 67.625421] ffff0004c26e9800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.632981] ================================================================== [ 67.640535] Disabling lock debugging due to kernel taint File descriptor[ 67.646100] Unable to handle kernel paging request at virtual address fabb801d4000018d in bad state [ 67.655456] Mem abort info: [ 67.659619] ESR = 0x96000004 [ 67.662801] EC = 0x25: DABT (current EL), IL = 32 bits [ 67.668225] SET = 0, FnV = 0 [ 67.671375] EA = 0, S1PTW = 0 [ 67.674613] Data abort info: [ 67.677587] ISV = 0, ISS = 0x00000004 [ 67.681522] CM = 0, WnR = 0 [ 67.684588] [fabb801d4000018d] address between user and kernel address ranges [ 67.691849] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 67.697470] Modules linked in: usb_f_fs libcomposite configfs ath9k_htc led_class mac80211 libarc4 ath9k_common ath9k_hw ath cfg80211 aes_ce_blk crypto_simd cryptd aes_ce_cipher ghash_ce gf128mul sha2_ce sha1_ce evdev sata_rcar libata xhci_plat_hcd scsi_mod xhci_hcd rene4 [ 67.740467] CPU: 0 PID: 2994 Comm: cat Tainted: G B 5.13.0-rc4+ #8 [ 67.748005] Hardware name: Renesas Salvator-X board based on r8a77951 (DT) [ 67.754924] pstate: 00000005 (nzcv daif -PAN -UAO -TCO BTYPE=--) [ 67.760974] pc : ffs_data_clear+0x138/0x370 [usb_f_fs] [ 67.766178] lr : ffs_data_clear+0x124/0x370 [usb_f_fs] [ 67.771365] sp : ffff800014767ad0 [ 67.774706] x29: ffff800014767ad0 x28: ffff800009cf91c0 x27: ffff0004c54861a0 [ 67.781913] x26: ffff0004dc90b288 x25: 1fffe00099ec10f5 x24: 00000000000a801d [ 67.789118] x23: 1fffe00099f6953a x22: dfff800000000000 x21: ffff0004cfb4a9d0 [ 67.796322] x20: d5e000ea00000bb1 x19: ffff0004cfb4a800 x18: 0000000000000000 [ 67.803526] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 67.810730] x14: 0720072007200720 x13: 0720072007200720 x12: 1ffff000028ecefa [ 67.817934] x11: ffff7000028ecefa x10: 0720072007200720 x9 : ffff80001132c014 [ 67.825137] x8 : ffff8000147677d8 x7 : ffff8000147677d7 x6 : 0000000000000000 [ 67.832341] x5 : 0000000000000001 x4 : ffff7000028ecefb x3 : 0000000000000001 [ 67.839544] x2 : 0000000000000005 x1 : 1abc001d4000018d x0 : d5e000ea00000c6d [ 67.846748] Call trace: [ 67.849218] ffs_data_clear+0x138/0x370 [usb_f_fs] [ 67.854058] ffs_data_reset+0x20/0x304 [usb_f_fs] [ 67.858810] ffs_data_closed+0x240/0x244 [usb_f_fs] [ 67.863736] ffs_ep0_release+0x40/0x54 [usb_f_fs] [ 67.868488] __fput+0x304/0x580 [ 67.871665] ____fput+0x18/0x24 [ 67.874837] task_work_run+0x104/0x180 [ 67.878622] do_notify_resume+0x458/0x14e0 [ 67.882754] work_pending+0xc/0x5f8 [ 67.886282] Code: b4000a54 9102f280 12000802 d343fc01 (38f66821) [ 67.892422] ---[ end trace 6d7cedf53d7abbea ]--- Segmentation fault root@rcar-gen3:~# ================================================================== Fixes: 4b187fceec3c ("usb: gadget: FunctionFS: add devices management code") Fixes: 3262ad824307 ("usb: gadget: f_fs: Stop ffs_closed NULL pointer dereference") Fixes: cdafb6d8b8da ("usb: gadget: f_fs: Fix use-after-free in ffs_free_inst") Reported-by: Bhuvanesh Surachari <[email protected]> Tested-by: Eugeniu Rosca <[email protected]> Reviewed-by: Eugeniu Rosca <[email protected]> Signed-off-by: Andrew Gabbasov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09usb: dwc3: support 64 bit DMA in platform driverSven Peter1-0/+4
Currently, the dwc3 platform driver does not explicitly ask for a DMA mask. This makes it fall back to the default 32-bit mask which breaks the driver on systems that only have RAM starting above the first 4G like the Apple M1 SoC. Fix this by calling dma_set_mask_and_coherent with a 64bit mask. Reviewed-by: Arnd Bergmann <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Sven Peter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09USB: core: Avoid WARNings for 0-length descriptor requestsAlan Stern1-0/+6
The USB core has utility routines to retrieve various types of descriptors. These routines will now provoke a WARN if they are asked to retrieve 0 bytes (USB "receive" requests must not have zero length), so avert this by checking the size argument at the start. CC: Johan Hovold <[email protected]> Reported-and-tested-by: [email protected] Reviewed-by: Johan Hovold <[email protected]> Signed-off-by: Alan Stern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09usb: gadget: function: printer: use list_move instead of list_del/list_addBaokun Li1-2/+1
Using list_move() instead of list_del() + list_add(). Reported-by: Hulk Robot <[email protected]> Signed-off-by: Baokun Li <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09usb: dwc3: core: fix kernel panic when do rebootPeter Chen1-1/+1
When do system reboot, it calls dwc3_shutdown and the whole debugfs for dwc3 has removed first, when the gadget tries to do deinit, and remove debugfs for its endpoints, it meets NULL pointer dereference issue when call debugfs_lookup. Fix it by removing the whole dwc3 debugfs later than dwc3_drd_exit. [ 2924.958838] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000002 .... [ 2925.030994] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--) [ 2925.037005] pc : inode_permission+0x2c/0x198 [ 2925.041281] lr : lookup_one_len_common+0xb0/0xf8 [ 2925.045903] sp : ffff80001276ba70 [ 2925.049218] x29: ffff80001276ba70 x28: ffff0000c01f0000 x27: 0000000000000000 [ 2925.056364] x26: ffff800011791e70 x25: 0000000000000008 x24: dead000000000100 [ 2925.063510] x23: dead000000000122 x22: 0000000000000000 x21: 0000000000000001 [ 2925.070652] x20: ffff8000122c6188 x19: 0000000000000000 x18: 0000000000000000 [ 2925.077797] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000004 [ 2925.084943] x14: ffffffffffffffff x13: 0000000000000000 x12: 0000000000000030 [ 2925.092087] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f x9 : ffff8000102b2420 [ 2925.099232] x8 : 7f7f7f7f7f7f7f7f x7 : feff73746e2f6f64 x6 : 0000000000008080 [ 2925.106378] x5 : 61c8864680b583eb x4 : 209e6ec2d263dbb7 x3 : 000074756f307065 [ 2925.113523] x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffff8000122c6188 [ 2925.120671] Call trace: [ 2925.123119] inode_permission+0x2c/0x198 [ 2925.127042] lookup_one_len_common+0xb0/0xf8 [ 2925.131315] lookup_one_len_unlocked+0x34/0xb0 [ 2925.135764] lookup_positive_unlocked+0x14/0x50 [ 2925.140296] debugfs_lookup+0x68/0xa0 [ 2925.143964] dwc3_gadget_free_endpoints+0x84/0xb0 [ 2925.148675] dwc3_gadget_exit+0x28/0x78 [ 2925.152518] dwc3_drd_exit+0x100/0x1f8 [ 2925.156267] dwc3_remove+0x11c/0x120 [ 2925.159851] dwc3_shutdown+0x14/0x20 [ 2925.163432] platform_shutdown+0x28/0x38 [ 2925.167360] device_shutdown+0x15c/0x378 [ 2925.171291] kernel_restart_prepare+0x3c/0x48 [ 2925.175650] kernel_restart+0x1c/0x68 [ 2925.179316] __do_sys_reboot+0x218/0x240 [ 2925.183247] __arm64_sys_reboot+0x28/0x30 [ 2925.187262] invoke_syscall+0x48/0x100 [ 2925.191017] el0_svc_common.constprop.0+0x48/0xc8 [ 2925.195726] do_el0_svc+0x28/0x88 [ 2925.199045] el0_svc+0x20/0x30 [ 2925.202104] el0_sync_handler+0xa8/0xb0 [ 2925.205942] el0_sync+0x148/0x180 [ 2925.209270] Code: a9025bf5 2a0203f5 121f0056 370802b5 (79400660) [ 2925.215372] ---[ end trace 124254d8e485a58b ]--- [ 2925.220012] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2925.227676] Kernel Offset: disabled [ 2925.231164] CPU features: 0x00001001,20000846 [ 2925.235521] Memory Limit: none [ 2925.238580] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--- Fixes: 5ff90af9da8f ("usb: dwc3: debugfs: Add and remove endpoint dirs dynamically") Cc: Jack Pham <[email protected]> Tested-by: Jack Pham <[email protected]> Signed-off-by: Peter Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09usb: misc: brcmstb-usb-pinmap: check return value after calling ↵Yang Yingliang1-0/+2
platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Fixes: 517c4c44b323 ("usb: Add driver to allow any GPIO to be used for 7211 USB signals") Cc: stable <[email protected]> Signed-off-by: Yang Yingliang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09usb: dwc3: ep0: fix NULL pointer exceptionMarian-Cristian Rotariu1-0/+3
There is no validation of the index from dwc3_wIndex_to_dep() and we might be referring a non-existing ep and trigger a NULL pointer exception. In certain configurations we might use fewer eps and the index might wrongly indicate a larger ep index than existing. By adding this validation from the patch we can actually report a wrong index back to the caller. In our usecase we are using a composite device on an older kernel, but upstream might use this fix also. Unfortunately, I cannot describe the hardware for others to reproduce the issue as it is a proprietary implementation. [ 82.958261] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a4 [ 82.966891] Mem abort info: [ 82.969663] ESR = 0x96000006 [ 82.972703] Exception class = DABT (current EL), IL = 32 bits [ 82.978603] SET = 0, FnV = 0 [ 82.981642] EA = 0, S1PTW = 0 [ 82.984765] Data abort info: [ 82.987631] ISV = 0, ISS = 0x00000006 [ 82.991449] CM = 0, WnR = 0 [ 82.994409] user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000c6210ccc [ 83.000999] [00000000000000a4] pgd=0000000053aa5003, pud=0000000053aa5003, pmd=0000000000000000 [ 83.009685] Internal error: Oops: 96000006 [#1] PREEMPT SMP [ 83.026433] Process irq/62-dwc3 (pid: 303, stack limit = 0x000000003985154c) [ 83.033470] CPU: 0 PID: 303 Comm: irq/62-dwc3 Not tainted 4.19.124 #1 [ 83.044836] pstate: 60000085 (nZCv daIf -PAN -UAO) [ 83.049628] pc : dwc3_ep0_handle_feature+0x414/0x43c [ 83.054558] lr : dwc3_ep0_interrupt+0x3b4/0xc94 ... [ 83.141788] Call trace: [ 83.144227] dwc3_ep0_handle_feature+0x414/0x43c [ 83.148823] dwc3_ep0_interrupt+0x3b4/0xc94 [ 83.181546] ---[ end trace aac6b5267d84c32f ]--- Signed-off-by: Marian-Cristian Rotariu <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09usb: gadget: eem: fix wrong eem header operationLinyu Yuan1-2/+2
when skb_clone() or skb_copy_expand() fail, it should pull skb with lengh indicated by header, or not it will read network data and check it as header. Cc: <[email protected]> Signed-off-by: Linyu Yuan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09usb: typec: intel_pmc_mux: Put ACPI device using acpi_dev_put()Andy Shevchenko1-4/+4
For ACPI devices we have a symmetric API to put them, so use it in the driver. Reviewed-by: Heikki Krogerus <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09usb: typec: intel_pmc_mux: Add missed error check for devm_ioremap_resource()Andy Shevchenko1-0/+5
devm_ioremap_resource() can return an error, add missed check for it. Fixes: 43d596e32276 ("usb: typec: intel_pmc_mux: Check the port status before connect") Reviewed-by: Heikki Krogerus <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09usb: typec: intel_pmc_mux: Put fwnode in error case during ->probe()Andy Shevchenko1-1/+3
device_get_next_child_node() bumps a reference counting of a returned variable. We have to balance it whenever we return to the caller. Fixes: 6701adfa9693 ("usb: typec: driver for Intel PMC mux control") Cc: Heikki Krogerus <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09usb: typec: tcpm: Do not finish VDM AMS for retrying ResponsesKyle Tso1-0/+3
If the VDM responses couldn't be sent successfully, it doesn't need to finish the AMS until the retry count reaches the limit. Fixes: 0908c5aca31e ("usb: typec: tcpm: AMS and Collision Avoidance") Reviewed-by: Guenter Roeck <[email protected]> Cc: stable <[email protected]> Acked-by: Heikki Krogerus <[email protected]> Signed-off-by: Kyle Tso <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09usb: fix various gadget panics on 10gbps cablingMaciej Żenczykowski1-0/+8
usb_assign_descriptors() is called with 5 parameters, the last 4 of which are the usb_descriptor_header for: full-speed (USB1.1 - 12Mbps [including USB1.0 low-speed @ 1.5Mbps), high-speed (USB2.0 - 480Mbps), super-speed (USB3.0 - 5Gbps), super-speed-plus (USB3.1 - 10Gbps). The differences between full/high/super-speed descriptors are usually substantial (due to changes in the maximum usb block size from 64 to 512 to 1024 bytes and other differences in the specs), while the difference between 5 and 10Gbps descriptors may be as little as nothing (in many cases the same tuning is simply good enough). However if a gadget driver calls usb_assign_descriptors() with a NULL descriptor for super-speed-plus and is then used on a max 10gbps configuration, the kernel will crash with a null pointer dereference, when a 10gbps capable device port + cable + host port combination shows up. (This wouldn't happen if the gadget max-speed was set to 5gbps, but it of course defaults to the maximum, and there's no real reason to artificially limit it) The fix is to simply use the 5gbps descriptor as the 10gbps descriptor, if a 10gbps descriptor wasn't provided. Obviously this won't fix the problem if the 5gbps descriptor is also NULL, but such cases can't be so trivially solved (and any such gadgets are unlikely to be used with USB3 ports any way). Cc: Felipe Balbi <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Signed-off-by: Maciej Żenczykowski <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09usb: fix various gadgets null ptr deref on 10gbps cabling.Maciej Żenczykowski10-10/+14
This avoids a null pointer dereference in f_{ecm,eem,hid,loopback,printer,rndis,serial,sourcesink,subset,tcm} by simply reusing the 5gbps config for 10gbps. Fixes: eaef50c76057 ("usb: gadget: Update usb_assign_descriptors for SuperSpeedPlus") Cc: Christophe JAILLET <[email protected]> Cc: Felipe Balbi <[email protected]> Cc: Gustavo A. R. Silva <[email protected]> Cc: Lorenzo Colitti <[email protected]> Cc: Martin K. Petersen <[email protected]> Cc: Michael R Sweet <[email protected]> Cc: Mike Christie <[email protected]> Cc: Pawel Laszczak <[email protected]> Cc: Peter Chen <[email protected]> Cc: Sudhakar Panneerselvam <[email protected]> Cc: Wei Ming Chen <[email protected]> Cc: Will McVicker <[email protected]> Cc: Zqiang <[email protected]> Reviewed-By: Lorenzo Colitti <[email protected]> Cc: stable <[email protected]> Signed-off-by: Maciej Żenczykowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD RenoirMario Limonciello2-1/+7
The XHCI controller is required to enter D3hot rather than D3cold for AMD s2idle on this hardware generation. Otherwise, the 'Controller Not Ready' (CNR) bit is not being cleared by host in resume and eventually this results in xhci resume failures during the s2idle wakeup. Link: https://lore.kernel.org/linux-usb/[email protected]/ Suggested-by: Prike Liang <[email protected]> Signed-off-by: Mario Limonciello <[email protected]> Cc: stable <[email protected]> # 5.11+ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09usb: f_ncm: only first packet of aggregate needs to start timerMaciej Żenczykowski1-4/+4
The reasoning for this change is that if we already had a packet pending, then we also already had a pending timer, and as such there is no need to reschedule it. This also prevents packets getting delayed 60 ms worst case under a tiny packet every 290us transmit load, by keeping the timeout always relative to the first queued up packet. (300us delay * 16KB max aggregation / 80 byte packet =~ 60 ms) As such the first packet is now at most delayed by 300us. Under low transmit load, this will simply result in us sending a shorter aggregate, as originally intended. This patch has the benefit of greatly reducing (by ~10 factor with 1500 byte frames aggregated into 16 kiB) the number of (potentially pretty costly) updates to the hrtimer. Cc: Brooke Basile <[email protected]> Cc: Bryan O'Donoghue <[email protected]> Cc: Felipe Balbi <[email protected]> Cc: Lorenzo Colitti <[email protected]> Signed-off-by: Maciej Żenczykowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09USB: f_ncm: ncm_bitrate (speed) is unsignedMaciej Żenczykowski1-1/+1
[ 190.544755] configfs-gadget gadget: notify speed -44967296 This is because 4250000000 - 2**32 is -44967296. Fixes: 9f6ce4240a2b ("usb: gadget: f_ncm.c added") Cc: Brooke Basile <[email protected]> Cc: Bryan O'Donoghue <[email protected]> Cc: Felipe Balbi <[email protected]> Cc: Lorenzo Colitti <[email protected]> Cc: Yauheni Kaliuta <[email protected]> Cc: Linux USB Mailing List <[email protected]> Acked-By: Lorenzo Colitti <[email protected]> Signed-off-by: Maciej Żenczykowski <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-09Merge tag 'usb-v5.13-rc6' of ↵Greg Kroah-Hartman2-8/+7
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus Peter writes: Two bug fixes for cdns3 and cdnsp * tag 'usb-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: usb: cdnsp: Fix deadlock issue in cdnsp_thread_irq_handler usb: cdns3: Enable TDL_CHK only for OUT ep
Powered by cgit, Gruvboxed by Blaster4385.