| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull NVMe fixes from Keith:
"nvme fixes Linux 6.10
- Use reserved tags for special fabrics operations (Chunguang)
- Persistent Reservation status masking fix (Weiwen)"
* tag 'nvme-6.10-2024-06-05' of git://git.infradead.org/nvme:
nvme: fix nvme_pr_* status code parsing
nvme-fabrics: use reserved tag for reg read/write command
|
|
Block size should be between 512 and PAGE_SIZE and be a power of 2. The current
check does not validate this, so update the check.
Without this patch, null_blk would Oops due to a null pointer deref when
loaded with bs=1536 [1].
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Andreas Hindborg <[email protected]>
Reviewed-by: Ming Lei <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[axboe: remove unnecessary braces and != 0 check]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Fix the parsing if extra status bits (e.g. MORE) is present.
Fixes: 7fb42780d06c ("nvme: Convert NVMe errors to PR errors")
Signed-off-by: Weiwen Hu <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
In some scenarios, if too many commands are issued by nvme command in
the same time by user tasks, this may exhaust all tags of admin_q. If
a reset (nvme reset or IO timeout) occurs before these commands finish,
reconnect routine may fail to update nvme regs due to insufficient tags,
which will cause kernel hang forever. In order to workaround this issue,
maybe we can let reg_read32()/reg_read64()/reg_write32() use reserved
tags. This maybe safe for nvmf:
1. For the disable ctrl path, we will not issue connect command
2. For the enable ctrl / fw activate path, since connect and reg_xx()
are called serially.
So the reserved tags may still be enough while reg_xx() use reserved tags.
Signed-off-by: Chunguang Xu <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
A zoned device with a smaller last zone together with a zone capacity
smaller than the zone size does make any sense as that does not
correspond to any possible setup for a real device:
1) For ZNS and zoned UFS devices, all zones are always the same size.
2) For SMR HDDs, all zones always have the same capacity.
In other words, if we have a smaller last runt zone, then this zone
capacity should always be equal to the zone size.
Add a check in null_init_zoned_dev() to prevent a configuration to have
both a smaller zone size and a zone capacity smaller than the zone size.
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Niklas Cassel <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.10
- Removing unused fields (Kanchan)
- Large folio offsets support (Kundan)
- Multipath NUMA node initialiazation fix (Nilay)
- Multipath IO stats accounting fixes (Keith)
- Circular lockdep fix (Keith)
- Target race condition fix (Sagi)
- Target memory leak fix (Sagi)"
* tag 'nvme-6.10-2024-05-29' of git://git.infradead.org/nvme:
nvmet: fix a possible leak when destroy a ctrl during qp establishment
nvme: use srcu for iterating namespace list
nvme: adjust multiples of NVME_CTRL_PAGE_SIZE in offset
nvme: remove sgs and sws
nvmet: fix ns enable/disable possible hang
nvme-multipath: fix io accounting on failover
nvme: fix multipath batched completion accounting
nvme-multipath: find NUMA path only for online numa-node
|
|
In nvmet_sq_destroy we capture sq->ctrl early and if it is non-NULL we
know that a ctrl was allocated (in the admin connect request handler)
and we need to release pending AERs, clear ctrl->sqs and sq->ctrl
(for nvme-loop primarily), and drop the final reference on the ctrl.
However, a small window is possible where nvmet_sq_destroy starts (as
a result of the client giving up and disconnecting) concurrently with
the nvme admin connect cmd (which may be in an early stage). But *before*
kill_and_confirm of sq->ref (i.e. the admin connect managed to get an sq
live reference). In this case, sq->ctrl was allocated however after it was
captured in a local variable in nvmet_sq_destroy.
This prevented the final reference drop on the ctrl.
Solve this by re-capturing the sq->ctrl after all inflight request has
completed, where for sure sq->ctrl reference is final, and move forward
based on that.
This issue was observed in an environment with many hosts connecting
multiple ctrls simoutanuosly, creating a delay in allocating a ctrl
leading up to this race window.
Reported-by: Alex Turin <[email protected]>
Signed-off-by: Sagi Grimberg <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
The nvme pci driver synchronizes with all the namespace queues during a
reset to ensure that there's no pending timeout work.
Meanwhile the timeout work potentially iterates those same namespaces to
freeze their queues.
Each of those namespace iterations use the same read lock. If a write
lock should somehow get between the synchronize and freeze steps, then
forward progress is deadlocked.
We had been relying on the nvme controller state machine to ensure the
reset work wouldn't conflict with timeout work. That guarantee may be a
bit fragile to rely on, so iterate the namespace lists without taking
potentially circular locks, as reported by lockdep.
Link: https://lore.kernel.org/all/20220930001943.zdbvolc3gkekfmcv@shindev/
Reported-by: Shinichiro Kawasaki <[email protected]>
Tested-by: Shinichiro Kawasaki <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
In __bch_bucket_alloc_set() the lines after lable 'err:' indeed do
nothing useful after multiple cache devices are removed from bcache
code. This cleanup patch drops the useless code to save a bit CPU
cycles.
Signed-off-by: Coly Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
If there are extreme heavy write I/O continuously hit on relative small
cache device (512GB in my testing), it is possible to make counter
c->gc_stats.in_use continue to increase and exceed CUTOFF_CACHE_ADD.
If 'c->gc_stats.in_use > CUTOFF_CACHE_ADD' happens, all following write
requests will bypass the cache device because check_should_bypass()
returns 'true'. Because all writes bypass the cache device, counter
c->sectors_to_gc has no chance to be negative value, and garbage
collection thread won't be waken up even the whole cache becomes clean
after writeback accomplished. The aftermath is that all write I/Os go
directly into backing device even the cache device is clean.
To avoid the above situation, this patch uses a quite conservative way
to fix: if 'c->gc_stats.in_use > CUTOFF_CACHE_ADD' happens, only wakes
up garbage collection thread when the whole cache device is clean.
Before the fix, the writes-always-bypass situation happens after 10+
hours write I/O pressure on 512GB Intel optane memory which acts as
cache device. After this fix, such situation doesn't happen after 36+
hours testing.
Signed-off-by: Coly Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Currently, if the gc is running, when the allocator found free_inc
is empty, allocator has to wait the gc finish. Before that, the
IO is blocked.
But actually, there would be some buckets is reclaimable before gc,
and gc will never mark this kind of bucket to be unreclaimable.
So we can put these buckets into free_inc in gc running to avoid
IO being blocked.
Signed-off-by: Dongsheng Yang <[email protected]>
Signed-off-by: Mingzhe Zou <[email protected]>
Signed-off-by: Coly Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
sd can set a max_sectors value that is lower than the max_hw_sectors
limit based on the block limits VPD page. While this is rather unusual,
it used to work until the max_user_sectors field was split out to cleanly
deal with conflicting hardware and user limits when the hardware limit
changes. Also set max_user_sectors to ensure the limit can properly be
stacked.
Fixes: 4f563a64732d ("block: add a max_user_discard_sectors queue limit")
Reported-by: Mike Snitzer <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Mike Snitzer <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
When changing the maximum number of open zones, print that number
instead of the total number of zones.
Fixes: dc4d137ee3b7 ("null_blk: add support for max open/active zone limit for zoned devices")
Cc: [email protected]
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Niklas Cassel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
When powering on a null_blk device that is not already on, the return
value ret that is initialized to be count is reused to check the return
value of null_add_dev(), leading to nullb_device_power_store() to return
null_add_dev() return value (0 on success) instead of "count".
So make sure to set ret to be equal to count when there are no errors.
Fixes: a2db328b0839 ("null_blk: fix null-ptr-dereference while configuring 'power' and 'submit_queues'")
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Yu Kuai <[email protected]>
Reviewed-by: Kanchan Joshi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Don't stuff the values directly into the queue without any
synchronization, but instead delay applying the queue limits in
the caller and let dm_set_zones_restrictions work on the limit
structure.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Fold it into the only caller in preparation to changes in the
queue limits setup.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Mike Snitzer <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Keep it together with the rest of the zoned code.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Pull ipmi updates from Corey Minyard:
"Mostly updates for deprecated interfaces, platform.remove and
converting from a tasklet to a BH workqueue.
Also use HAS_IOPORT for disabling inb()/outb()"
* tag 'for-linus-6.10-1' of https://github.com/cminyard/linux-ipmi:
ipmi: kcs_bmc_npcm7xx: Convert to platform remove callback returning void
ipmi: kcs_bmc_aspeed: Convert to platform remove callback returning void
ipmi: ipmi_ssif: Convert to platform remove callback returning void
ipmi: ipmi_si_platform: Convert to platform remove callback returning void
ipmi: ipmi_powernv: Convert to platform remove callback returning void
ipmi: bt-bmc: Convert to platform remove callback returning void
char: ipmi: handle HAS_IOPORT dependencies
ipmi: Convert from tasklet to BH workqueue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"There is one new driver and then most of the changes are the device
tree bindings conversions to yaml.
New driver:
- Epson RX8111
Drivers:
- Many Device Tree bindings conversions to dtschema
- pcf8563: wakeup-source support"
* tag 'rtc-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
pcf8563: add wakeup-source support
rtc: rx8111: handle VLOW flag
rtc: rx8111: demote warnings to debug level
rtc: rx6110: Constify struct regmap_config
dt-bindings: rtc: convert trivial devices into dtschema
dt-bindings: rtc: stmp3xxx-rtc: convert to dtschema
dt-bindings: rtc: pxa-rtc: convert to dtschema
rtc: Add driver for Epson RX8111
dt-bindings: rtc: Add Epson RX8111
rtc: mcp795: drop unneeded MODULE_ALIAS
rtc: nuvoton: Modify part number value
rtc: test: Split rtc unit test into slow and normal speed test
dt-bindings: rtc: nxp,lpc1788-rtc: convert to dtschema
dt-bindings: rtc: digicolor-rtc: move to trivial-rtc
dt-bindings: rtc: alphascale,asm9260-rtc: convert to dtschema
dt-bindings: rtc: armada-380-rtc: convert to dtschema
rtc: cros-ec: provide ID table for avoiding fallback match
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"Runtime PM (power management) is improved and hot-join support has
been added to the dw controller driver.
Core:
- Allow device driver to trigger controller runtime PM
Drivers:
- dw: hot-join support
- svc: better IBI handling"
* tag 'i3c/for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: dw: Add hot-join support.
i3c: master: Enable runtime PM for master controller
i3c: master: svc: fix invalidate IBI type and miss call client IBI handler
i3c: master: svc: change ENXIO to EAGAIN when IBI occurs during start frame
i3c: Add comment for -EAGAIN in i3c_device_do_priv_xfers()
|
|
Pull drm fixes from Dave Airlie:
"Some fixes for the end of the merge window, mostly amdgpu and panthor,
with one nouveau uAPI change that fixes a bad decision we made a few
months back.
nouveau:
- fix bo metadata uAPI for vm bind
panthor:
- Fixes for panthor's heap logical block.
- Reset on unrecoverable fault
- Fix VM references.
- Reset fix.
xlnx:
- xlnx compile and doc fixes.
amdgpu:
- Handle vbios table integrated info v2.3
amdkfd:
- Handle duplicate BOs in reserve_bo_and_cond_vms
- Handle memory limitations on small APUs
dp/mst:
- MST null deref fix.
bridge:
- Don't let next bridge create connector in adv7511 to make probe
work"
* tag 'drm-next-2024-05-25' of https://gitlab.freedesktop.org/drm/kernel:
drm/amdgpu/atomfirmware: add intergrated info v2.3 table
drm/mst: Fix NULL pointer dereference at drm_dp_add_payload_part2
drm/amdkfd: Let VRAM allocations go to GTT domain on small APUs
drm/amdkfd: handle duplicate BOs in reserve_bo_and_cond_vms
drm/bridge: adv7511: Attach next bridge without creating connector
drm/buddy: Fix the warn on's during force merge
drm/nouveau: use tile_mode and pte_kind for VM_BIND bo allocations
drm/panthor: Call panthor_sched_post_reset() even if the reset failed
drm/panthor: Reset the FW VM to NULL on unplug
drm/panthor: Keep a ref to the VM at the panthor_kernel_bo level
drm/panthor: Force an immediate reset on unrecoverable faults
drm/panthor: Document drm_panthor_tiler_heap_destroy::handle validity constraints
drm/panthor: Fix an off-by-one in the heap context retrieval logic
drm/panthor: Relax the constraints on the tiler chunk size
drm/panthor: Make sure the tiler initial/max chunks are consistent
drm/panthor: Fix tiler OOM handling to allow incremental rendering
drm: xlnx: zynqmp_dpsub: Fix compilation error
drm: xlnx: zynqmp_dpsub: Fix few function comments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- The compression format used for boot images is now configurable at
build time, and these formats are shown in `make help`
- access_ok() has been optimized
- A pair of performance bugs have been fixed in the uaccess handlers
- Various fixes and cleanups, including one for the IMSIC build failure
and one for the early-boot ftrace illegal NOPs bug
* tag 'riscv-for-linus-6.10-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix early ftrace nop patching
irqchip: riscv-imsic: Fixup riscv_ipi_set_virq_range() conflict
riscv: selftests: Add signal handling vector tests
riscv: mm: accelerate pagefault when badaccess
riscv: uaccess: Relax the threshold for fast path
riscv: uaccess: Allow the last potential unrolled copy
riscv: typo in comment for get_f64_reg
Use bool value in set_cpu_online()
riscv: selftests: Add hwprobe binaries to .gitignore
riscv: stacktrace: fixed walk_stackframe()
ftrace: riscv: move from REGS to ARGS
riscv: do not select MODULE_SECTIONS by default
riscv: show help string for riscv-specific targets
riscv: make image compression configurable
riscv: cpufeature: Fix extension subset checking
riscv: cpufeature: Fix thead vector hwcap removal
riscv: rewrite __kernel_map_pages() to fix sleeping in invalid context
riscv: force PAGE_SIZE linear mapping if debug_pagealloc is enabled
riscv: Define TASK_SIZE_MAX for __access_ok()
riscv: Remove PGDIR_SIZE_L3 and TASK_SIZE_MIN
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- a small cleanup in the drivers/xen/xenbus Makefile
- a fix of the Xen xenstore driver to improve connecting to a late
started Xenstore
- an enhancement for better support of ballooning in PVH guests
- a cleanup using try_cmpxchg() instead of open coding it
* tag 'for-linus-6.10a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
drivers/xen: Improve the late XenStore init protocol
xen/xenbus: Use *-y instead of *-objs in Makefile
xen/x86: add extra pages to unpopulated-alloc if available
locking/x86/xen: Use try_cmpxchg() in xen_alloc_p2m_entry()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a change to input core to trim amount of keys data in modalias string
in case when a device declares too many keys and they do not fit in
uevent buffer instead of reporting an error which results in uevent
not being generated at all
- support for Machenike G5 Pro Controller added to xpad driver
- support for FocalTech FT5452 and FT8719 added to edt-ft5x06
- support for new SPMI vibrator added to pm8xxx-vibrator driver
- missing locking added to cyapa touchpad driver
- removal of unused fields in various driver structures
- explicit initialization of i2c_device_id::driver_data to 0 dropped
from input drivers
- other assorted fixes and cleanups.
* tag 'input-for-v6.10-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits)
Input: edt-ft5x06 - add support for FocalTech FT5452 and FT8719
dt-bindings: input: touchscreen: edt-ft5x06: Document FT5452 and FT8719 support
Input: xpad - add support for Machenike G5 Pro Controller
Input: try trimming too long modalias strings
Input: drop explicit initialization of struct i2c_device_id::driver_data to 0
Input: zet6223 - remove an unused field in struct zet6223_ts
Input: chipone_icn8505 - remove an unused field in struct icn8505_data
Input: cros_ec_keyb - remove an unused field in struct cros_ec_keyb
Input: lpc32xx-keys - remove an unused field in struct lpc32xx_kscan_drv
Input: matrix_keypad - remove an unused field in struct matrix_keypad
Input: tca6416-keypad - remove unused struct tca6416_drv_data
Input: tca6416-keypad - remove an unused field in struct tca6416_keypad_chip
Input: da7280 - remove an unused field in struct da7280_haptic
Input: ff-core - prefer struct_size over open coded arithmetic
Input: cyapa - add missing input core locking to suspend/resume functions
input: pm8xxx-vibrator: add new SPMI vibrator support
dt-bindings: input: qcom,pm8xxx-vib: add new SPMI vibrator module
input: pm8xxx-vibrator: refactor to support new SPMI vibrator
Input: pm8xxx-vibrator - correct VIB_MAX_LEVELS calculation
Input: sur40 - convert le16 to cpu before use
...
|
|
bio_vec start offset may be relatively large particularly when large
folio gets added to the bio. A bigger offset will result in avoiding the
single-segment mapping optimization and end up using expensive
mempool_alloc further.
Rather than using absolute value, adjust bv_offset by
NVME_CTRL_PAGE_SIZE while checking if segment can be fitted into one/two
PRP entries.
Suggested-by: Christoph Hellwig <[email protected]>
Signed-off-by: Kundan Kumar <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
sgs/sws are unused, so remove these from nvme_ns_head structure.
Signed-off-by: Kanchan Joshi <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fix from Greg KH:
"Here is one remaining bugfix for 6.10-rc1 that missed the 6.9-final
merge window, and has been sitting in my tree and linux-next for quite
a while now, but wasn't sent to you (my fault, travels...)
It is a bugfix to resolve an error in the speakup code that could
overflow a buffer.
It has been in linux-next for a while with no reported problems"
* tag 'char-misc-6.10-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
speakup: Fix sizeof() vs ARRAY_SIZE() bug
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small TTY and Serial driver fixes that missed the
6.9-final merge window, but have been in my tree for weeks (my fault,
travel caused me to miss this)
These fixes include:
- more n_gsm fixes for reported problems
- 8520_mtk driver fix
- 8250_bcm7271 driver fix
- sc16is7xx driver fix
All of these have been in linux-next for weeks without any reported
problems"
* tag 'tty-6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: sc16is7xx: fix bug in sc16is7xx_set_baud() when using prescaler
serial: 8250_bcm7271: use default_mux_rate if possible
serial: 8520_mtk: Set RTS on shutdown for Rx in-band wakeup
tty: n_gsm: fix missing receive state reset after mode switch
tty: n_gsm: fix possible out-of-bounds in gsm0_receive()
|
|
Pull more block updates from Jens Axboe:
"Followup block updates, mostly due to NVMe being a bit late to the
party. But nothing major in there, so not a big deal.
In detail, this contains:
- NVMe pull request via Keith:
- Fabrics connection retries (Daniel, Hannes)
- Fabrics logging enhancements (Tokunori)
- RDMA delete optimization (Sagi)
- ublk DMA alignment fix (me)
- null_blk sparse warning fixes (Bart)
- Discard support for brd (Keith)
- blk-cgroup list corruption fixes (Ming)
- blk-cgroup stat propagation fix (Waiman)
- Regression fix for plugging stall with md (Yu)
- Misc fixes or cleanups (David, Jeff, Justin)"
* tag 'block-6.10-20240523' of git://git.kernel.dk/linux: (24 commits)
null_blk: fix null-ptr-dereference while configuring 'power' and 'submit_queues'
blk-throttle: remove unused struct 'avg_latency_bucket'
block: fix lost bio for plug enabled bio based device
block: t10-pi: add MODULE_DESCRIPTION()
blk-mq: add helper for checking if one CPU is mapped to specified hctx
blk-cgroup: Properly propagate the iostat update up the hierarchy
blk-cgroup: fix list corruption from reorder of WRITE ->lqueued
blk-cgroup: fix list corruption from resetting io stat
cdrom: rearrange last_media_change check to avoid unintentional overflow
nbd: Fix signal handling
nbd: Remove a local variable from nbd_send_cmd()
nbd: Improve the documentation of the locking assumptions
nbd: Remove superfluous casts
nbd: Use NULL to represent a pointer
brd: implement discard support
null_blk: Fix two sparse warnings
ublk_drv: set DMA alignment mask to 3
nvme-rdma, nvme-tcp: include max reconnects for reconnect logging
nvmet-rdma: Avoid o(n^2) loop in delete_ctrl
nvme: do not retry authentication failures
...
|
|
When disabling an nvmet namespace, there is a period where the
subsys->lock is released, as the ns disable waits for backend IO to
complete, and the ns percpu ref to be properly killed. The original
intent was to avoid taking the subsystem lock for a prolong period as
other processes may need to acquire it (for example new incoming
connections).
However, it opens up a window where another process may come in and
enable the ns, (re)intiailizing the ns percpu_ref, causing the disable
sequence to hang.
Solve this by taking the global nvmet_config_sem over the entire configfs
enable/disable sequence.
Fixes: a07b4970f464 ("nvmet: add a generic NVMe target")
Signed-off-by: Sagi Grimberg <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
There are io stats accounting that needs to be handled, so don't call
blk_mq_end_request() directly. Use the existing nvme_end_req() helper
that already handles everything.
Fixes: d4d957b53d91ee ("nvme-multipath: support io stats on the mpath device")
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
Batched completions were missing the io stats accounting and bio trace
events. Move the common code to a helper and call it from the batched
and non-batched functions.
Fixes: d4d957b53d91ee ("nvme-multipath: support io stats on the mpath device")
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A bunch of fixes that came in during the merge window.
Matti found several issues with some of the more complexly configured
Rohm regulators and the helpers they use and there were some errors in
the specification of tps6594 when regulators are grouped together"
* tag 'regulator-fix-v6.10-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: tps6594-regulator: Correct multi-phase configuration
regulator: tps6287x: Force writing VSEL bit
regulator: pickable ranges: don't always cache vsel
regulator: rohm-regulator: warn if unsupported voltage is set
regulator: bd71828: Don't overwrite runtime voltages
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"Guenter ran with memory sanitisers and found an issue in the new KUnit
tests that Richard added where an assumption in older test code was
exposed, this was fixed quickly by Richard"
* tag 'regmap-fix-v6.10-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: kunit: Fix array overflow in stride() test
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Quite smaller than usual. Notably it includes the fix for the unix
regression from the past weeks. The TCP window fix will require some
follow-up, already queued.
Current release - regressions:
- af_unix: fix garbage collection of embryos
Previous releases - regressions:
- af_unix: fix race between GC and receive path
- ipv6: sr: fix missing sk_buff release in seg6_input_core
- tcp: remove 64 KByte limit for initial tp->rcv_wnd value
- eth: r8169: fix rx hangup
- eth: lan966x: remove ptp traps in case the ptp is not enabled
- eth: ixgbe: fix link breakage vs cisco switches
- eth: ice: prevent ethtool from corrupting the channels
Previous releases - always broken:
- openvswitch: set the skbuff pkt_type for proper pmtud support
- tcp: Fix shift-out-of-bounds in dctcp_update_alpha()
Misc:
- a bunch of selftests stabilization patches"
* tag 'net-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (25 commits)
r8169: Fix possible ring buffer corruption on fragmented Tx packets.
idpf: Interpret .set_channels() input differently
ice: Interpret .set_channels() input differently
nfc: nci: Fix handling of zero-length payload packets in nci_rx_work()
net: relax socket state check at accept time.
tcp: remove 64 KByte limit for initial tp->rcv_wnd value
net: ti: icssg_prueth: Fix NULL pointer dereference in prueth_probe()
tls: fix missing memory barrier in tls_init
net: fec: avoid lock evasion when reading pps_enable
Revert "ixgbe: Manual AN-37 for troublesome link partners for X550 SFI"
testing: net-drv: use stats64 for testing
net: mana: Fix the extra HZ in mana_hwc_send_request
net: lan966x: Remove ptp traps in case the ptp is not enabled.
openvswitch: Set the skbuff pkt_type for proper pmtud support.
selftest: af_unix: Make SCM_RIGHTS into OOB data.
af_unix: Fix garbage collection of embryos carrying OOB with SCM_RIGHTS
tcp: Fix shift-out-of-bounds in dctcp_update_alpha().
selftests/net: use tc rule to filter the na packet
ipv6: sr: fix memleak in seg6_hmac_init_algo
af_unix: Update unix_sk(sk)->oob_skb under sk_receive_queue lock.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing cleanup from Steven Rostedt:
"Remove second argument of __assign_str()
The __assign_str() macro logic of the TRACE_EVENT() macro was
optimized so that it no longer needs the second argument. The
__assign_str() is always matched with __string() field that takes a
field name and the source for that field:
__string(field, source)
The TRACE_EVENT() macro logic will save off the source value and then
use that value to copy into the ring buffer via the __assign_str().
Before commit c1fa617caeb0 ("tracing: Rework __assign_str() and
__string() to not duplicate getting the string"), the __assign_str()
needed the second argument which would perform the same logic as the
__string() source parameter did. Not only would this add overhead, but
it was error prone as if the __assign_str() source produced something
different, it may not have allocated enough for the string in the ring
buffer (as the __string() source was used to determine how much to
allocate)
Now that the __assign_str() just uses the same string that was used in
__string() it no longer needs the source parameter. It can now be
removed"
* tag 'trace-assign-str-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/treewide: Remove second parameter of __assign_str()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The major fix here is for a filesystem corruption issue reported on
Apple M1 as a result of buggy management of the floating point
register state introduced in 6.8. I initially reverted one of the
offending patches, but in the end Ard cooked a proper fix so there's a
revert+reapply in the series.
Aside from that, we've got some CPU errata workarounds and misc other
fixes.
- Fix broken FP register state tracking which resulted in filesystem
corruption when dm-crypt is used
- Workarounds for Arm CPU errata affecting the SSBS Spectre
mitigation
- Fix lockdep assertion in DMC620 memory controller PMU driver
- Fix alignment of BUG table when CONFIG_DEBUG_BUGVERBOSE is
disabled"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/fpsimd: Avoid erroneous elide of user state reload
Reapply "arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD"
arm64: asm-bug: Add .align 2 to the end of __BUG_ENTRY
perf/arm-dmc620: Fix lockdep assert in ->event_init()
Revert "arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD"
arm64: errata: Add workaround for Arm errata 3194386 and 3312417
arm64: cputype: Add Neoverse-V3 definitions
arm64: cputype: Add Cortex-X4 definitions
arm64: barrier: Restore spec_bar() macro
|
|
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- virtio-net is finally supported in vduse
- virtio (balloon and mem) interaction with suspend is improved
- vhost-scsi now handles signals better/faster
And fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
virtio-pci: Check if is_avq is NULL
virtio: delete vq in vp_find_vqs_msix() when request_irq() fails
MAINTAINERS: add Eugenio Pérez as reviewer
vhost-vdpa: Remove usage of the deprecated ida_simple_xx() API
vp_vdpa: don't allocate unused msix vectors
sound: virtio: drop owner assignment
fuse: virtio: drop owner assignment
scsi: virtio: drop owner assignment
rpmsg: virtio: drop owner assignment
nvdimm: virtio_pmem: drop owner assignment
wifi: mac80211_hwsim: drop owner assignment
vsock/virtio: drop owner assignment
net: 9p: virtio: drop owner assignment
net: virtio: drop owner assignment
net: caif: virtio: drop owner assignment
misc: nsm: drop owner assignment
iommu: virtio: drop owner assignment
drm/virtio: drop owner assignment
gpio: virtio: drop owner assignment
firmware: arm_scmi: virtio: drop owner assignment
...
|
|
An issue was found on the RTL8125b when transmitting small fragmented
packets, whereby invalid entries were inserted into the transmit ring
buffer, subsequently leading to calls to dma_unmap_single() with a null
address.
This was caused by rtl8169_start_xmit() not noticing changes to nr_frags
which may occur when small packets are padded (to work around hardware
quirks) in rtl8169_tso_csum_v2().
To fix this, postpone inspecting nr_frags until after any padding has been
applied.
Fixes: 9020845fb5d6 ("r8169: improve rtl8169_start_xmit")
Cc: [email protected]
Signed-off-by: Ken Milmore <[email protected]>
Reviewed-by: Heiner Kallweit <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Writing 'power' and 'submit_queues' concurrently will trigger kernel
panic:
Test script:
modprobe null_blk nr_devices=0
mkdir -p /sys/kernel/config/nullb/nullb0
while true; do echo 1 > submit_queues; echo 4 > submit_queues; done &
while true; do echo 1 > power; echo 0 > power; done
Test result:
BUG: kernel NULL pointer dereference, address: 0000000000000148
Oops: 0000 [#1] PREEMPT SMP
RIP: 0010:__lock_acquire+0x41d/0x28f0
Call Trace:
<TASK>
lock_acquire+0x121/0x450
down_write+0x5f/0x1d0
simple_recursive_removal+0x12f/0x5c0
blk_mq_debugfs_unregister_hctxs+0x7c/0x100
blk_mq_update_nr_hw_queues+0x4a3/0x720
nullb_update_nr_hw_queues+0x71/0xf0 [null_blk]
nullb_device_submit_queues_store+0x79/0xf0 [null_blk]
configfs_write_iter+0x119/0x1e0
vfs_write+0x326/0x730
ksys_write+0x74/0x150
This is because del_gendisk() can concurrent with
blk_mq_update_nr_hw_queues():
nullb_device_power_store nullb_apply_submit_queues
null_del_dev
del_gendisk
nullb_update_nr_hw_queues
if (!dev->nullb)
// still set while gendisk is deleted
return 0
blk_mq_update_nr_hw_queues
dev->nullb = NULL
Fix this problem by resuing the global mutex to protect
nullb_device_power_store() and nullb_update_nr_hw_queues() from configfs.
Fixes: 45919fbfe1c4 ("null_blk: Enable modifying 'submit_queues' after an instance has been configured")
Reported-and-tested-by: Yi Zhang <[email protected]>
Closes: https://lore.kernel.org/all/CAHj4cs9LgsHLnjg8z06LQ3Pr5cax-+Ps+xT7AP7TPnEjStuwZA@mail.gmail.com/
Signed-off-by: Yu Kuai <[email protected]>
Reviewed-by: Zhu Yanjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
There was a semantic conflict between 21a8f8a0eb35 ("irqchip: Add RISC-V
incoming MSI controller early driver") and dc892fb44322 ("riscv: Use
IPIs for remote cache/TLB flushes by default") due to an API change.
This manifests as a build failure post-merge.
Reported-by: Tomasz Jeznach <[email protected]>
Link: https://lore.kernel.org/all/mhng-10b71228-cf3e-42ca-9abf-5464b15093f1@palmer-ri-x1c9/
Fixes: 0bfbc914d943 ("Merge tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux")
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Unlike ice, idpf does not check, if user has requested at least 1 combined
channel. Instead, it relies on a check in the core code. Unfortunately, the
check does not trigger for us because of the hacky .set_channels()
interpretation logic that is not consistent with the core code.
This naturally leads to user being able to trigger a crash with an invalid
input. This is how:
1. ethtool -l <IFNAME> -> combined: 40
2. ethtool -L <IFNAME> rx 0 tx 0
combined number is not specified, so command becomes {rx_count = 0,
tx_count = 0, combined_count = 40}.
3. ethnl_set_channels checks, if there is at least 1 RX and 1 TX channel,
comparing (combined_count + rx_count) and (combined_count + tx_count)
to zero. Obviously, (40 + 0) is greater than zero, so the core code
deems the input OK.
4. idpf interprets `rx 0 tx 0` as 0 channels and tries to proceed with such
configuration.
The issue has to be solved fundamentally, as current logic is also known to
cause AF_XDP problems in ice [0].
Interpret the command in a way that is more consistent with ethtool
manual [1] (--show-channels and --set-channels) and new ice logic.
Considering that in the idpf driver only the difference between RX and TX
queues forms dedicated channels, change the correct way to set number of
channels to:
ethtool -L <IFNAME> combined 10 /* For symmetric queues */
ethtool -L <IFNAME> combined 8 tx 2 rx 0 /* For asymmetric queues */
[0] https://lore.kernel.org/netdev/[email protected]/
[1] https://man7.org/linux/man-pages/man8/ethtool.8.html
Fixes: 02cbfba1add5 ("idpf: add ethtool callbacks")
Reviewed-by: Przemek Kitszel <[email protected]>
Reviewed-by: Igor Bagnucki <[email protected]>
Signed-off-by: Larysa Zaremba <[email protected]>
Tested-by: Krishneil Singh <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Jacob Keller <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
A bug occurs because a safety check guarding AF_XDP-related queues in
ethnl_set_channels(), does not trigger. This happens, because kernel and
ice driver interpret the ethtool command differently.
How the bug occurs:
1. ethtool -l <IFNAME> -> combined: 40
2. Attach AF_XDP to queue 30
3. ethtool -L <IFNAME> rx 15 tx 15
combined number is not specified, so command becomes {rx_count = 15,
tx_count = 15, combined_count = 40}.
4. ethnl_set_channels checks, if there are any AF_XDP of queues from the
new (combined_count + rx_count) to the old one, so from 55 to 40, check
does not trigger.
5. ice interprets `rx 15 tx 15` as 15 combined channels and deletes the
queue that AF_XDP is attached to.
Interpret the command in a way that is more consistent with ethtool
manual [0] (--show-channels and --set-channels).
Considering that in the ice driver only the difference between RX and TX
queues forms dedicated channels, change the correct way to set number of
channels to:
ethtool -L <IFNAME> combined 10 /* For symmetric queues */
ethtool -L <IFNAME> combined 8 tx 2 rx 0 /* For asymmetric queues */
[0] https://man7.org/linux/man-pages/man8/ethtool.8.html
Fixes: 87324e747fde ("ice: Implement ethtool ops for channels")
Reviewed-by: Michal Swiatkowski <[email protected]>
Signed-off-by: Larysa Zaremba <[email protected]>
Tested-by: Chandan Kumar Rout <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]>
Acked-by: Maciej Fijalkowski <[email protected]>
Signed-off-by: Jacob Keller <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Currently, the late XenStore init protocol is only triggered properly
for the case that HVM_PARAM_STORE_PFN is ~0ULL (invalid). For the
case that XenStore interface is allocated but not ready (the connection
status is not XENSTORE_CONNECTED), Linux should also wait until the
XenStore is set up properly.
Introduce a macro to describe the XenStore interface is ready, use
it in xenbus_probe_initcall() to select the code path of doing the
late XenStore init protocol or not. Since now we have more than one
condition for XenStore late init, rework the check in xenbus_probe()
for the free_irq().
Take the opportunity to enhance the check of the allocated XenStore
interface can be properly mapped, and return error early if the
memremap() fails.
Fixes: 5b3353949e89 ("xen: add support for initializing xenstore later as HVM domain")
Signed-off-by: Henry Wang <[email protected]>
Signed-off-by: Michal Orzel <[email protected]>
Reviewed-by: Stefano Stabellini <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
|
|
In the prueth_probe() function, if one of the calls to emac_phy_connect()
fails due to of_phy_connect() returning NULL, then the subsequent call to
phy_attached_info() will dereference a NULL pointer.
Check the return code of emac_phy_connect and fail cleanly if there is an
error.
Fixes: 128d5874c082 ("net: ti: icssg-prueth: Add ICSSG ethernet driver")
Cc: [email protected]
Signed-off-by: Romain Gantois <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: MD Danish Anwar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The assignment of pps_enable is protected by tmreg_lock, but the read
operation of pps_enable is not. So the Coverity tool reports a lock
evasion warning which may cause data race to occur when running in a
multithread environment. Although this issue is almost impossible to
occur, we'd better fix it, at least it seems more logically reasonable,
and it also prevents Coverity from continuing to issue warnings.
Fixes: 278d24047891 ("net: fec: ptp: Enable PPS output based on ptp clock")
Signed-off-by: Wei Fang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
This reverts commit 565736048bd5f9888990569993c6b6bfdf6dcb6d.
According to the commit, it implements a manual AN-37 for some
"troublesome" Juniper MX5 switches. This appears to be a workaround for a
particular switch.
It has been reported that this causes a severe breakage for other switches,
including a Cisco 3560CX-12PD-S.
The code appears to be a workaround for a specific switch which fails to
link in SFI mode. It expects to see AN-37 auto negotiation in order to
link. The Cisco switch is not expecting AN-37 auto negotiation. When the
device starts the manual AN-37, the Cisco switch decides that the port is
confused and stops attempting to link with it. This persists until a power
cycle. A simple driver unload and reload does not resolve the issue, even
if loading with a version of the driver which lacks this workaround.
The authors of the workaround commit have not responded with
clarifications, and the result of the workaround is complete failure to
connect with other switches.
This appears to be a case where the driver can either "correctly" link with
the Juniper MX5 switch, at the cost of bricking the link with the Cisco
switch, or it can behave properly for the Cisco switch, but fail to link
with the Junipir MX5 switch. I do not know enough about the standards
involved to clearly determine whether either switch is at fault or behaving
incorrectly. Nor do I know whether there exists some alternative fix which
corrects behavior with both switches.
Revert the workaround for the Juniper switch.
Fixes: 565736048bd5 ("ixgbe: Manual AN-37 for troublesome link partners for X550 SFI")
Link: https://lore.kernel.org/netdev/[email protected]/T/
Link: https://forum.proxmox.com/threads/intel-x553-sfp-ixgbe-no-go-on-pve8.135129/#post-612291
Signed-off-by: Jacob Keller <[email protected]>
Cc: Jeff Daly <[email protected]>
Cc: [email protected]
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/20240520-net-2024-05-20-revert-silicom-switch-workaround-v1-1-50f80f261c94@intel.com
Signed-off-by: Paolo Abeni <[email protected]>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next-fixes for v6.10-rc1:
- MST null deref fix.
- Don't let next bridge create connector in adv7511 to make probe work.
Signed-off-by: Dave Airlie <[email protected]>
From: Maarten Lankhorst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-fixes-6.10-2024-05-22:
amdgpu:
- Handle vbios table integrated info v2.3
amdkfd:
- Handle duplicate BOs in reserve_bo_and_cond_vms
- Handle memory limitations on small APUs
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more non-mm updates from Andrew Morton:
- A series ("kbuild: enable more warnings by default") from Arnd
Bergmann which enables a number of additional build-time warnings. We
fixed all the fallout which we could find, there may still be a few
stragglers.
- Samuel Holland has developed the series "Unified cross-architecture
kernel-mode FPU API". This does a lot of consolidation of
per-architecture kernel-mode FPU usage and enables the use of newer
AMD GPUs on RISC-V.
- Tao Su has fixed some selftests build warnings in the series
"Selftests: Fix compilation warnings due to missing _GNU_SOURCE
definition".
- This pull also includes a nilfs2 fixup from Ryusuke Konishi.
* tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits)
nilfs2: make block erasure safe in nilfs_finish_roll_forward()
selftests/harness: use 1024 in place of LINE_MAX
Revert "selftests/harness: remove use of LINE_MAX"
selftests/fpu: allow building on other architectures
selftests/fpu: move FP code to a separate translation unit
drm/amd/display: use ARCH_HAS_KERNEL_FPU_SUPPORT
drm/amd/display: only use hard-float, not altivec on powerpc
riscv: add support for kernel-mode FPU
x86: implement ARCH_HAS_KERNEL_FPU_SUPPORT
powerpc: implement ARCH_HAS_KERNEL_FPU_SUPPORT
LoongArch: implement ARCH_HAS_KERNEL_FPU_SUPPORT
lib/raid6: use CC_FLAGS_FPU for NEON CFLAGS
arm64: crypto: use CC_FLAGS_FPU for NEON CFLAGS
arm64: implement ARCH_HAS_KERNEL_FPU_SUPPORT
ARM: crypto: use CC_FLAGS_FPU for NEON CFLAGS
ARM: implement ARCH_HAS_KERNEL_FPU_SUPPORT
arch: add ARCH_HAS_KERNEL_FPU_SUPPORT
x86/fpu: fix asm/fpu/types.h include guard
kbuild: enable -Wcast-function-type-strict unconditionally
kbuild: enable -Wformat-truncation on clang
...
|