aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2020-12-16net: bcmgenet: Fix a resource leak in an error handling path in the probe ↵Christophe JAILLET1-1/+3
functin If the 'register_netdev()' call fails, we must undo a previous 'bcmgenet_mii_init()' call. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Christophe JAILLET <[email protected]> Acked-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-16dpaa2-eth: fix the size of the mapped SGT bufferIoana Ciornei1-1/+1
This patch fixes an error condition triggered when the code path which transmits a S/G frame descriptor when the skb's headroom is not enough for DPAA2's needs. We are greated with a splat like the one below when a SGT structure is recycled and that is because even though a dma_unmap is performed on the Tx confirmation path, the unmap is not done with the proper size. [ 714.464927] WARNING: CPU: 13 PID: 0 at drivers/iommu/io-pgtable-arm.c:281 __arm_lpae_map+0x2d4/0x30c (...) [ 714.465343] Call trace: [ 714.465348] __arm_lpae_map+0x2d4/0x30c [ 714.465353] __arm_lpae_map+0x114/0x30c [ 714.465357] __arm_lpae_map+0x114/0x30c [ 714.465362] __arm_lpae_map+0x114/0x30c [ 714.465366] arm_lpae_map+0xf4/0x180 [ 714.465373] arm_smmu_map+0x4c/0xc0 [ 714.465379] __iommu_map+0x100/0x2bc [ 714.465385] iommu_map_atomic+0x20/0x30 [ 714.465391] __iommu_dma_map+0xb0/0x110 [ 714.465397] iommu_dma_map_page+0xb8/0x120 [ 714.465404] dma_map_page_attrs+0x1a8/0x210 [ 714.465413] __dpaa2_eth_tx+0x384/0xbd0 [fsl_dpaa2_eth] [ 714.465421] dpaa2_eth_tx+0x84/0x134 [fsl_dpaa2_eth] [ 714.465427] dev_hard_start_xmit+0x10c/0x2b0 [ 714.465433] sch_direct_xmit+0x1a0/0x550 (...) The dpaa2-eth driver uses an area of software annotations to transmit necessary information from the Tx path to the Tx confirmation one. This SWA structure has a different layout for each kind of frame that we are dealing with: linear, S/G or XDP. The commit referenced was incorrectly setting up the 'sgt_size' field for the S/G type of SWA even though we are dealing with a linear skb here. Fixes: d70446ee1f40 ("dpaa2-eth: send a scatter-gather FD instead of realloc-ing") Reported-by: Daniel Thompson <[email protected]> Tested-by: Daniel Thompson <[email protected]> Signed-off-by: Ioana Ciornei <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-16Merge tag 'selinux-pr-20201214' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux updates from Paul Moore: "While we have a small number of SELinux patches for v5.11, there are a few changes worth highlighting: - Change the LSM network hooks to pass flowi_common structs instead of the parent flowi struct as the LSMs do not currently need the full flowi struct and they do not have enough information to use it safely (missing information on the address family). This patch was discussed both with Herbert Xu (representing team netdev) and James Morris (representing team LSMs-other-than-SELinux). - Fix how we handle errors in inode_doinit_with_dentry() so that we attempt to properly label the inode on following lookups instead of continuing to treat it as unlabeled. - Tweak the kernel logic around allowx, auditallowx, and dontauditx SELinux policy statements such that the auditx/dontauditx are effective even without the allowx statement. Everything passes our test suite" * tag 'selinux-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: lsm,selinux: pass flowi_common instead of flowi to the LSM hooks selinux: Fix fall-through warnings for Clang selinux: drop super_block backpointer from superblock_security_struct selinux: fix inode_doinit_with_dentry() LABEL_INVALID error handling selinux: allow dontauditx and auditallowx rules to take effect without allowx selinux: fix error initialization in inode_doinit_with_dentry()
2020-12-16net: dsa: qca: ar9331: fix sleeping function called from invalid context bugOleksij Rempel1-9/+24
With lockdep enabled, we will get following warning: ar9331_switch ethernet.1:10 lan0 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:00] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13) BUG: sleeping function called from invalid context at kernel/locking/mutex.c:935 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 18, name: kworker/0:1 INFO: lockdep is turned off. irq event stamp: 602 hardirqs last enabled at (601): [<8073fde0>] _raw_spin_unlock_irq+0x3c/0x80 hardirqs last disabled at (602): [<8073a4f4>] __schedule+0x184/0x800 softirqs last enabled at (0): [<80080f60>] copy_process+0x578/0x14c8 softirqs last disabled at (0): [<00000000>] 0x0 CPU: 0 PID: 18 Comm: kworker/0:1 Not tainted 5.10.0-rc3-ar9331-00734-g7d644991df0c #31 Workqueue: events deferred_probe_work_func Stack : 80980000 80980000 8089ef70 80890000 804b5414 80980000 00000002 80b53728 00000000 800d1268 804b5414 ffffffde 00000017 800afe08 81943860 0f5bfc32 00000000 00000000 8089ef70 819436c0 ffffffea 00000000 00000000 00000000 8194390c 808e353c 0000000f 66657272 80980000 00000000 00000000 80890000 804b5414 80980000 00000002 80b53728 00000000 00000000 00000000 80d40000 ... Call Trace: [<80069ce0>] show_stack+0x9c/0x140 [<800afe08>] ___might_sleep+0x220/0x244 [<8073bfb0>] __mutex_lock+0x70/0x374 [<8073c2e0>] mutex_lock_nested+0x2c/0x38 [<804b5414>] regmap_update_bits_base+0x38/0x8c [<804ee584>] regmap_update_bits+0x1c/0x28 [<804ee714>] ar9331_sw_unmask_irq+0x34/0x60 [<800d91f0>] unmask_irq+0x48/0x70 [<800d93d4>] irq_startup+0x114/0x11c [<800d65b4>] __setup_irq+0x4f4/0x6d0 [<800d68a0>] request_threaded_irq+0x110/0x190 [<804e3ef0>] phy_request_interrupt+0x4c/0xe4 [<804df508>] phylink_bringup_phy+0x2c0/0x37c [<804df7bc>] phylink_of_phy_connect+0x118/0x130 [<806c1a64>] dsa_slave_create+0x3d0/0x578 [<806bc4ec>] dsa_register_switch+0x934/0xa20 [<804eef98>] ar9331_sw_probe+0x34c/0x364 [<804eb48c>] mdio_probe+0x44/0x70 [<8049e3b4>] really_probe+0x30c/0x4f4 [<8049ea10>] driver_probe_device+0x264/0x26c [<8049bc10>] bus_for_each_drv+0xb4/0xd8 [<8049e684>] __device_attach+0xe8/0x18c [<8049ce58>] bus_probe_device+0x48/0xc4 [<8049db70>] deferred_probe_work_func+0xdc/0xf8 [<8009ff64>] process_one_work+0x2e4/0x4a0 [<800a0770>] worker_thread+0x2a8/0x354 [<800a774c>] kthread+0x16c/0x174 [<8006306c>] ret_from_kernel_thread+0x14/0x1c ar9331_switch ethernet.1:10 lan1 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:02] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13) DSA: tree 0 setup To fix it, it is better to move access to MDIO register to the .irq_bus_sync_unlock call back. Fixes: ec6698c272de ("net: dsa: add support for Atheros AR9331 built-in switch") Signed-off-by: Oleksij Rempel <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-16i40e, xsk: clear the status bits for the next_to_use descriptorBjörn Töpel1-1/+4
On the Rx side, the next_to_use index points to the next item in the HW ring to be refilled/allocated, and next_to_clean points to the next item to potentially be processed. When the HW Rx ring is fully refilled, i.e. no packets has been processed, the next_to_use will be next_to_clean - 1. When the ring is fully processed next_to_clean will be equal to next_to_use. The latter case is where a bug is triggered. If the next_to_use bits are not cleared, and the "fully processed" state is entered, a stale descriptor can be processed. The skb-path correctly clear the status bit for the next_to_use descriptor, but the AF_XDP zero-copy path did not do that. This change adds the status bits clearing of the next_to_use descriptor. Fixes: 3b4f0b66c2b3 ("i40e, xsk: Migrate to new MEM_TYPE_XSK_BUFF_POOL") Signed-off-by: Björn Töpel <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-16ice, xsk: clear the status bits for the next_to_use descriptorBjörn Töpel1-1/+4
On the Rx side, the next_to_use index points to the next item in the HW ring to be refilled/allocated, and next_to_clean points to the next item to potentially be processed. When the HW Rx ring is fully refilled, i.e. no packets has been processed, the next_to_use will be next_to_clean - 1. When the ring is fully processed next_to_clean will be equal to next_to_use. The latter case is where a bug is triggered. If the next_to_use bits are not cleared, and the "fully processed" state is entered, a stale descriptor can be processed. The skb-path correctly clear the status bit for the next_to_use descriptor, but the AF_XDP zero-copy path did not do that. This change adds the status bits clearing of the next_to_use descriptor. Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Signed-off-by: Björn Töpel <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-16Merge tag 'printk-for-5.11' of ↵Linus Torvalds3-16/+19
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Finally allow parallel writes and reads into/from the lockless ringbuffer. But it is not a complete solution. Readers are still serialized against each other. And nested writes are still prevented by printk_safe per-CPU buffers. - Use ttynull as the ultimate fallback for /dev/console. - Officially allow disabling console output by using console="" or console=null - A few code cleanups * tag 'printk-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: remove logbuf_lock writer-protection of ringbuffer printk: inline log_output(),log_store() in vprintk_store() printk: remove obsolete dead assignment printk/console: Allow to disable console output by using console="" or console=null init/console: Use ttynull as a fallback when there is no console printk: ringbuffer: Reference text_data_ring directly in callees.
2020-12-16Merge tags 'spi-nor/for-5.11' and 'nand/for-5.11' into mtd/nextMiquel Raynal859-28874/+15414
SPI NOR core changes: - Initial support for stateful Octal DTR mode using volatile settings - Preliminary support for JEDEC 251 (xSPI) and JEDEC 216D standards - Support for Cypress Semper flash - Support to specify ECC block size of SPI NOR flashes - Fixes to avoid clearing of non-volatile Block Protection bits at probe Generic NAND core: * ECC management: - Add an I/O request tweaking mechanism - Entire rework of the software BCH ECC driver, creation of a real ECC engine, getting rid of raw NAND structures, migration to more generic prototypes, misc fixes and style cleanup. Moved now to the Generic NAND layer. - Entire rework of the software Hamming ECC driver, creation of a real ECC engine, getting rid of raw NAND structures, misc renames, comment updates, cleanup, and style fixes. Moved now to the generic NAND layer. - Necessary plumbing at the NAND level to retrieve generic NAND ECC engines (softwares and on-die). - Update of the bindings. Raw NAND core: * Geting rid of the chip->ecc.priv entry. * Fix miscellaneous typos in kernel-doc Raw NAND controller drivers: * AU1550: Ensure the presence of the right includes * Davinci: Do not use extra dereferencing * GPMI: - Fix the driver only sense CS0 R/B issue - Fix the random DMA timeout issue - Use a single line for of_device_id - Use of_device_get_match_data() - Fix reference count leak in gpmi ops - Cleanup makefile - Fix binding matching of clocks on different SoCs * Ingenic: remove redundant get_device() in ingenic_ecc_get() * Intel LGM: New NAND controller driver * Marvell: Drop useless line * Meson: - Fix a resource leak in init - Fix meson_nfc_dma_buffer_release() arguments * mxc: - Use device_get_match_data() - Use a single line for of_device_id - Remove platform data support * Qcom: - Add support for SDX55 - Support for IPQ6018 QPIC NAND controller - Fix DMA sync on FLASH_STATUS register read * Rockchip: New NAND controller driver for RK3308, RK2928 and others * Sunxi: Add MDMA support SPI-NAND core: * Creation of a SPI-NAND on-die ECC engine * Move ECC related definitions earlier in the driver * Fix typo in comment * Fill a default ECC provider/algorithm * Remove outdated comment * Fix OOB read * Allow the case where there is no ECC engine * Use the external ECC engine logic SPI-NAND chip drivers: * Micron: - Add support for MT29F2G01AAAED - Use more specific names * Macronix: - Add support for MX35LFxG24AD - Add support for MX35LFxGE4AD Others: * onenand: Use mtd->oops_panic_write as condition * plat-ram: correctly free memory on error path in platram_probe()
2020-12-16lan743x: fix rx_napi_poll/interrupt ping-pongSven Van Asbroeck1-20/+23
Even if there is more rx data waiting on the chip, the rx napi poll fn will never run more than once - it will always read a few buffers, then bail out and re-arm interrupts. Which results in ping-pong between napi and interrupt. This defeats the purpose of napi, and is bad for performance. Fix by making the rx napi poll behave identically to other ethernet drivers: 1. initialize rx napi polling with an arbitrary budget (64). 2. in the polling fn, return full weight if rx queue is not depleted, this tells the napi core to "keep polling". 3. update the rx tail ("ring the doorbell") once for every 8 processed rx ring buffers. Thanks to Jakub Kicinski, Eric Dumazet and Andrew Lunn for their expert opinions and suggestions. Tested with 20 seconds of full bandwidth receive (iperf3): rx irqs softirqs(NET_RX) ----------------------------- before 23827 33620 after 129 4081 Tested-by: Sven Van Asbroeck <[email protected]> # lan7430 Fixes: 23f0703c125be ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Sven Van Asbroeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-16char: ipmi: convert comma to semicolonZheng Yongjun1-3/+3
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <[email protected]> Message-Id: <[email protected]> Signed-off-by: Corey Minyard <[email protected]>
2020-12-16Merge branch 'for-5.11/wacom' into for-linusJiri Kosina1-8/+8
2020-12-16Merge branch 'for-5.11/sony' into for-linusJiri Kosina3-43/+174
- DS4 power and firmware reporting fixes, from Roderick Colenbrander - support for ghlive PS3/WII u dongles, from Pascal Giard
2020-12-16Merge branch 'for-5.11/intel-ish' into for-linusJiri Kosina1-4/+2
2020-12-16Merge branch 'for-5.11/i2c-hid' into for-linusJiri Kosina1-1/+4
- error reporting fix from Coiby Xu
2020-12-16Merge branch 'for-5.11/elecom' into for-linusJiri Kosina2970-78558/+120461
- support for EX-G M-XGL20DLBK device, from YOSHIOKA Takuma
2020-12-16Merge branch 'for-5.11/core' into for-linusJiri Kosina3-2/+30
- increase of maximum HID report size to 16KB in order to support some of the modern devices, from Dean Camera - control interface support for hidraw, from Dean Camera - stylus battery reporting improvement, from Dmitry Torokhov
2020-12-16Merge branch 'for-5.11/asus' into for-linusJiri Kosina2-14/+110
Support for ASUS N-Key keyboard, from Luke D Jones
2020-12-16Merge branch 'for-5.11/amd-sfh-hid' into for-linusJiri Kosina12-0/+1729
From Sandeep Singh. AMD SFH (Sensor Fusion Hub) is HID based driver.SFH FW is part of MP2 processor (MP2 which is an ARM core connected to x86 for processing sensor data) and it runs on MP2 where in the driver resides on X86. The driver functionalities are divided into three parts: 1: amd-mp2-pcie:- This part of the module will communicate with MP2 firmware. MP2 which is exposed as a PCI device to the X86, uses mailboxes to talk to MP2 firmware to send/receive commands. 2: Client Layer:- This part of the driver will use DRAM data and convert the data into HID format based on HID reports. 3: Transport layer :- This part of the driver the will communicate with HID core.Communication between devices and HID core is mostly done via HID reports In terms of architecture, it resembles like ISH (Intel Integrated Sensor Hub). However the major difference is all the hid reports are generated as part of the kernel driver. AMD SFH is integrated as a part of SoC, starting from 17h family of processors. The solution is working well on several OEM products. AMD SFH uses HID over PCIe bus.
2020-12-16Merge tag 'asm-generic-timers-5.11' of ↵Linus Torvalds7-920/+3
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann: "This cleans up two ancient timer features that were never completed in the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET. There was only one user left for the ARCH_USES_GETTIMEOFFSET variant of clocksource implementations, the ARM EBSA110 platform. Rather than changing to use modern timekeeping, we remove the platform entirely as Russell no longer uses his machine and nobody else seems to have one any more. The conditional code for using arch_gettimeoffset() is removed as a result. For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms not using clockevent drivers: parisc, ia64, most of m68k, and one Arm platform. These all do timer ticks slighly differently, and this gets cleaned up to the point they at least all call the same helper function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in Kconfig, the polarity is now reversed, with the few remaining ones selecting LEGACY_TIMER_TICK instead" * tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: timekeeping: default GENERIC_CLOCKEVENTS to enabled timekeeping: remove xtime_update m68k: remove timer_interrupt() function m68k: change remaining timers to legacy_timer_tick m68k: m68328: use legacy_timer_tick() m68k: sun3/sun3c: use legacy_timer_tick m68k: split heartbeat out of timer function m68k: coldfire: use legacy_timer_tick() parisc: use legacy_timer_tick ARM: rpc: use legacy_timer_tick ia64: convert to legacy_timer_tick timekeeping: add CONFIG_LEGACY_TIMER_TICK timekeeping: remove arch_gettimeoffset net: remove am79c961a driver ARM: remove ebsa110 platform
2020-12-15Merge branch 'akpm' (patches from Andrew)Linus Torvalds10-92/+152
Merge yet more updates from Andrew Morton: - lots of little subsystems - a few post-linux-next MM material. Most of the rest awaits more merging of other trees. Subsystems affected by this series: alpha, procfs, misc, core-kernel, bitmap, lib, lz4, checkpatch, nilfs, kdump, rapidio, gcov, bfs, relay, resource, ubsan, reboot, fault-injection, lzo, apparmor, and mm (swap, memory-hotplug, pagemap, cleanups, and gup). * emailed patches from Andrew Morton <[email protected]>: (86 commits) mm: fix some spelling mistakes in comments mm: simplify follow_pte{,pmd} mm: unexport follow_pte_pmd apparmor: remove duplicate macro list_entry_is_head() lib/lzo/lzo1x_compress.c: make lzogeneric1x_1_compress() static fault-injection: handle EI_ETYPE_TRUE reboot: hide from sysfs not applicable settings reboot: allow to override reboot type if quirks are found reboot: remove cf9_safe from allowed types and rename cf9_force reboot: allow to specify reboot mode via sysfs reboot: refactor and comment the cpu selection code lib/ubsan.c: mark type_check_kinds with static keyword kcov: don't instrument with UBSAN ubsan: expand tests and reporting ubsan: remove UBSAN_MISC in favor of individual options ubsan: enable for all*config builds ubsan: disable UBSAN_TRAP for all*config ubsan: disable object-size sanitizer under GCC ubsan: move cc-option tests into Kconfig ubsan: remove redundant -Wno-maybe-uninitialized ...
2020-12-15ath9k: make relay callbacks constJani Nikula1-1/+1
Now that relay_open() accepts const callbacks, make relay callbacks const. Link: https://lkml.kernel.org/r/7db0286c428f3a478dd7544afef04a3b131f1aa0.1606153547.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]> Acked-by: Kalle Valo <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Cc: Jens Axboe <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-12-15ath11k: make relay callbacks constJani Nikula1-1/+1
Now that relay_open() accepts const callbacks, make relay callbacks const. Link: https://lkml.kernel.org/r/44e3d65b71025c462948d0c554061dc7b40ab488.1606153547.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]> Acked-by: Kalle Valo <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Cc: Jens Axboe <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-12-15ath10k: make relay callbacks constJani Nikula1-1/+1
Now that relay_open() accepts const callbacks, make relay callbacks const. Link: https://lkml.kernel.org/r/85cabc6d4b0d0ca43d4e0fb94897ccd16e3b7930.1606153547.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]> Acked-by: Kalle Valo <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Cc: Jens Axboe <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-12-15drm/i915: make relay callbacks constJani Nikula1-1/+1
Now that relay_open() accepts const callbacks, make relay callbacks const. Link: https://lkml.kernel.org/r/534d089f413db98aa0b94773fa49d5275d0d3c25.1606153547.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Kalle Valo <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-12-15rapidio: remove unused rio_get_asm() and rio_get_device()Sebastian Andrzej Siewior1-81/+0
The functions rio_get_asm() and rio_get_device() are globally exported but have almost no users in tree. The only user is rio_init_mports() which invokes it via rio_init(). rio_init() iterates over every registered device and invokes rio_fixup_device(). It looks like a fixup function which should perform a "change" to the device but does nothing. It has been like this since its introduction in commit 394b701ce4fbf ("[PATCH] RapidIO support: core base") which was merged into v2.6.15-rc1. Remove rio_init() because the performed fixup function (rio_fixup_device()) does nothing. Remove rio_get_asm() and rio_get_device() which have no callers now. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Cc: Matt Porter <[email protected]> Cc: Alexandre Bounine <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-12-15drivers/misc/lkdtm/lkdtm.h: correct wrong filenames in commentFrancis Laniel1-7/+7
In lkdtm.h, files targeted in comments are named "lkdtm_file.c" while there are named "file.c" in directory. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Francis Laniel <[email protected]> Acked-by: Kees Cook <[email protected]> Cc: Daniel Axtens <[email protected]> Cc: Daniel Micay <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-12-15drivers/misc/lkdtm: add new file in LKDTM to test fortified strscpyFrancis Laniel4-0/+87
This new test ensures that fortified strscpy has the same behavior than vanilla strscpy (e.g. returning -E2BIG when src content is truncated). Finally, it generates a crash at runtime because there is a write overflow in destination string. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Francis Laniel <[email protected]> Reviewed-by: Kees Cook <[email protected]> Cc: Daniel Axtens <[email protected]> Cc: Daniel Micay <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-12-15lkdtm: tests for FORTIFY_SOURCEDaniel Axtens3-0/+54
Add code to test both: - runtime detection of the overrun of a structure. This covers the __builtin_object_size(x, 0) case. This test is called FORTIFY_OBJECT. - runtime detection of the overrun of a char array within a structure. This covers the __builtin_object_size(x, 1) case which can be used for some string functions. This test is called FORTIFY_SUBOBJECT. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Daniel Axtens <[email protected]> Signed-off-by: Francis Laniel <[email protected]> Suggested-by: Kees Cook <[email protected]> Reviewed-by: Kees Cook <[email protected]> Cc: Daniel Micay <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-12-15Merge branch 'exec-for-v5.11' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull execve updates from Eric Biederman: "This set of changes ultimately fixes the interaction of posix file lock and exec. Fundamentally most of the change is just moving where unshare_files is called during exec, and tweaking the users of files_struct so that the count of files_struct is not unnecessarily played with. Along the way fcheck and related helpers were renamed to more accurately reflect what they do. There were also many other small changes that fell out, as this is the first time in a long time much of this code has been touched. Benchmarks haven't turned up any practical issues but Al Viro has observed a possibility for a lot of pounding on task_lock. So I have some changes in progress to convert put_files_struct to always rcu free files_struct. That wasn't ready for the merge window so that will have to wait until next time" * 'exec-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits) exec: Move io_uring_task_cancel after the point of no return coredump: Document coredump code exclusively used by cell spufs file: Remove get_files_struct file: Rename __close_fd_get_file close_fd_get_file file: Replace ksys_close with close_fd file: Rename __close_fd to close_fd and remove the files parameter file: Merge __alloc_fd into alloc_fd file: In f_dupfd read RLIMIT_NOFILE once. file: Merge __fd_install into fd_install proc/fd: In fdinfo seq_show don't use get_files_struct bpf/task_iter: In task_file_seq_get_next use task_lookup_next_fd_rcu proc/fd: In proc_readfd_common use task_lookup_next_fd_rcu file: Implement task_lookup_next_fd_rcu kcmp: In get_file_raw_ptr use task_lookup_fd_rcu proc/fd: In tid_fd_mode use task_lookup_fd_rcu file: Implement task_lookup_fd_rcu file: Rename fcheck lookup_fd_rcu file: Replace fcheck_files with files_lookup_fd_rcu file: Factor files_lookup_fd_locked out of fcheck_files file: Rename __fcheck_files to files_lookup_fd_raw ...
2020-12-15Merge tag 'rpmsg-v5.11' of ↵Linus Torvalds6-123/+257
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull rpmsg updates from Bjorn Andersson: "This extracts the 'nameserver' previously used only by the virtio rpmsg transport to work ontop of any rpmsg implementation and clarifies the endianness of the data types used in rpmsg" * tag 'rpmsg-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: rpmsg: Turn name service into a stand alone driver rpmsg: Make rpmsg_{register|unregister}_device() public rpmsg: virtio: Add rpmsg channel device ops rpmsg: core: Add channel creation internal API rpmsg: virtio: Rename rpmsg_create_channel rpmsg: Move structure rpmsg_ns_msg to header file rpmsg: virtio: Move from virtio to rpmsg byte conversion rpmsg: Introduce __rpmsg{16|32|64} types
2020-12-15Merge tag 'hwlock-v5.11' of ↵Linus Torvalds2-16/+3
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull hwspinlock updates from Bjorn Andersson: "This contains a few minor cleanups and build warning fixes for the sprd and sirf hwspinlock drivers" * tag 'hwlock-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: hwspinlock: sirf: Remove the redundant 'of_match_ptr' hwspinlock: sprd: fixed warning of unused variable 'sprd_hwspinlock_of_match' hwspinlock: sprd: use module_platform_driver() instead postcore initcall hwspinlock: sprd: Remove redundant header files
2020-12-15Merge tag 'rproc-v5.11' of ↵Linus Torvalds24-196/+1843
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull remoteproc updates from Bjorn Andersson: "This introduces support for controlling the TI PRU, adds hooks for remoteproc drivers to override the default ELF based coredump format, introduces a library function for coredumps using named sections (aka the Qualcomm "minidump" format). It also fixes a problem with inconsistent notifications sent by the Qualcomm sysmon driver to the remote processors and it migrates the Qualcomm MSS driver to use power-domains for resources that aren't actually regulators. Lastly it contains a number of fixes for minor bugs and build warnings throughout the drivers" * tag 'rproc-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (47 commits) remoteproc/mediatek: read IPI buffer offset from FW remoteproc/mediatek: unprepare clk if scp_before_load fails remoteproc: qcom: Fix potential NULL dereference in adsp_init_mmio() remoteproc/mediatek: Fix kernel test robot warning remoteproc: k3-dsp: Fix return value check in k3_dsp_rproc_of_get_memories() remoteproc: qcom: pas: fix error handling in adsp_pds_enable remoteproc: qcom: fix reference leak in adsp_start remoteproc: q6v5-mss: fix error handling in q6v5_pds_enable remoteproc/mtk_scp: surround DT device IDs with CONFIG_OF remoteproc: qcom: Add minidump id for sm8150 modem remoteproc: qcom: Add capability to collect minidumps remoteproc: coredump: Add minidump functionality remoteproc: core: Add ops to enable custom coredump functionality remoteproc/mediatek: change MT8192 CFG register base remoteproc: pru: Add support for various PRU cores on K3 J721E SoCs remoteproc: pru: Add support for various PRU cores on K3 AM65x SoCs remoteproc: pru: Add pru-specific debugfs support remoteproc: pru: Add support for PRU specific interrupt configuration remoteproc: pru: Add a PRU remoteproc driver dt-bindings: remoteproc: Add binding doc for PRU cores in the PRU-ICSS ...
2020-12-15Merge tag 'pci-v5.11-changes' of ↵Linus Torvalds67-1706/+1638
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Decode PCIe 64 GT/s link speed (Gustavo Pimentel) - Remove unused HAVE_PCI_SET_MWI (Heiner Kallweit) - Reduce pci_set_cacheline_size() message to debug level (Heiner Kallweit) - Fix pci_slot_release() NULL pointer dereference (Jubin Zhong) - Unify ECAM constants in native PCI Express drivers (Krzysztof Wilczyński) - Return u8 from pci_find_capability() and similar (Puranjay Mohan) - Return u16 from pci_find_ext_capability() and similar (Bjorn Helgaas) - Fix ACPI companion lookup for device 0 on the root bus (Rafael J. Wysocki) Resource management: - Keep both device and resource name for config space remaps (Alexander Lobakin) - Bounds-check command-line resource alignment requests (Bjorn Helgaas) - Fix overflow in command-line resource alignment requests (Colin Ian King) Driver binding: - Avoid duplicate IDs in driver dynamic IDs list (Zhenzhong Duan) Power management: - Save/restore Precision Time Measurement Capability for suspend/resume (David E. Box) - Disable PTM during suspend to save power (David E. Box) - Add sysfs attribute for device power state (Maximilian Luz) - Rename pci_wakeup_bus() to pci_resume_bus() (Mika Westerberg) - Do not generate wakeup event when runtime resuming device (Mika Westerberg) - Save/restore ASPM L1SS Capability for suspend/resume (Vidya Sagar) Virtualization: - Mark AMD Raven iGPU ATS as broken in some platforms (Alex Deucher) - Add function 1 DMA alias quirk for Marvell 9215 SATA controller (Bjorn Helgaas) MSI: - Disable MSI for Pericom PCIe-USB adapter (Andy Shevchenko) - Improve warnings for 32-bit-limited MSI support (Vidya Sagar) Error handling: - Cache RCEC EA Capability offset in pci_init_capabilities() (Sean V Kelley) - Rename reset_link() to reset_subordinates() (Sean V Kelley) - Write AER Capability only when we control it (Sean V Kelley) - Clear AER status only when we control AER (Sean V Kelley) - Bind RCEC devices to the Root Port driver (Qiuxu Zhuo) - Recover from RCiEP AER errors (Qiuxu Zhuo) - Recover from RCEC AER errors (Sean V Kelley) - Add pcie_link_rcec() to associate RCiEPs (Sean V Kelley) - Add pcie_walk_rcec() to RCEC AER handling (Sean V Kelley) - Add pcie_walk_rcec() to RCEC PME handling (Sean V Kelley) - Add RCEC AER error injection support (Qiuxu Zhuo) Broadcom iProc PCIe controller driver: - Fix out-of-bound array accesses (Bharat Gooty) - Invalidate correct PAXB inbound windows (Roman Bacik) - Enhance PCIe Link information display (Srinath Mannam) Cadence PCIe controller driver: - Make "cdns,max-outbound-regions" property optional (Kishon Vijay Abraham I) Intel VMD host bridge driver: - Offset client MSI-X vectors (Jon Derrick) - Update type of __iomem pointers (Krzysztof Wilczyński) NVIDIA Tegra PCIe controller driver: - Move "dbi" accesses to post common DWC initialization (Vidya Sagar) - Read "dbi" base address to program in application logic (Vidya Sagar) - Fix ASPM-L1SS advertisement disable code (Vidya Sagar) - Set DesignWare IP version (Vidya Sagar) - Continue unconfig sequence even if parts fail (Vidya Sagar) - Check return value of tegra_pcie_init_controller() (Vidya Sagar) - Disable LTSSM during L2 entry (Vidya Sagar) Qualcomm PCIe controller driver: - Document PCIe bindings for SM8250 SoC (Manivannan Sadhasivam) - Add SM8250 SoC support (Manivannan Sadhasivam) - Add support for configuring BDF to SID mapping for SM8250 (Manivannan Sadhasivam) Renesas R-Car PCIe controller driver: - rcar: Drop unused members from struct rcar_pcie_host (Lad Prabhakar) - PCI: rcar-pci-host: Document r8a774e1 bindings (Lad Prabhakar) - PCI: rcar-pci-host: Convert bindings to json-schema (Yoshihiro Shimoda) - PCI: rcar-pci-host: Document r8a77965 bindings (Yoshihiro Shimoda) Samsung Exynos PCIe controller driver: - Rework driver to support Exynos5433 PCIe PHY (Jaehoon Chung) - Rework driver to support Exynos5433 variant (Jaehoon Chung) - Drop samsung,exynos5440-pcie binding (Marek Szyprowski) - Add the samsung,exynos-pcie binding (Marek Szyprowski) - Add the samsung,exynos-pcie-phy binding (Marek Szyprowski) Synopsys DesignWare PCIe controller driver: - Support multiple ATU memory regions (Rob Herring) - Move intel-gw ATU offset out of driver match data (Rob Herring) - Move "dbi", "dbi2", and "addr_space" resource setup into common code (Rob Herring) - Remove intel-gw unneeded function wrappers (Rob Herring) - Ensure all outbound ATU windows are reset (Rob Herring) - Use the common MSI irq_chip in dra7xx (Rob Herring) - Drop the .set_num_vectors() host op (Rob Herring) - Move MSI interrupt setup into DWC common code (Rob Herring) - Rework MSI initialization (Rob Herring) - Move link handling into common code (Rob Herring) - Move dw_pcie_msi_init() into core (Rob Herring) - Move dw_pcie_setup_rc() to DWC common code (Rob Herring) - Remove unnecessary wrappers around dw_pcie_host_init() (Rob Herring) - Drop keystone duplicated 'num-viewport'" (Rob Herring) - Move inbound and outbound windows to common struct (Rob Herring) - Detect number of iATU windows (Rob Herring) - Warn if non-prefetchable memory aperture size is > 32-bit (Vidya Sagar) - Add support to program ATU for >4GB memory (Vidya Sagar) - Set 32-bit DMA mask for MSI target address allocation (Vidya Sagar) TI J721E PCIe driver: - Fix "ti,syscon-pcie-ctrl" to take argument (Kishon Vijay Abraham I) - Add host mode dt-bindings for TI's J7200 SoC (Kishon Vijay Abraham I) - Add EP mode dt-bindings for TI's J7200 SoC (Kishon Vijay Abraham I) - Get offset within "syscon" from "ti,syscon-pcie-ctrl" phandle arg (Kishon Vijay Abraham I) TI Keystone PCIe controller driver: - Enable compile-testing on !ARM (Alex Dewar)" * tag 'pci-v5.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits) PCI: Add function 1 DMA alias quirk for Marvell 9215 SATA controller PCI/ACPI: Fix companion lookup for device 0 on the root bus PCI: Keep both device and resource name for config space remaps PCI: xgene: Removed unused ".bus_shift" initialisers from pci-xgene.c PCI: vmd: Update type of the __iomem pointers PCI: iproc: Convert to use the new ECAM constants PCI: thunder-pem: Add constant for custom ".bus_shift" initialiser PCI: Unify ECAM constants in native PCI Express drivers PCI: Disable PTM during suspend to save power PCI/PTM: Save/restore Precision Time Measurement Capability for suspend/resume PCI: Mark AMD Raven iGPU ATS as broken in some platforms PCI: j721e: Get offset within "syscon" from "ti,syscon-pcie-ctrl" phandle arg dt-bindings: PCI: Add EP mode dt-bindings for TI's J7200 SoC dt-bindings: PCI: Add host mode dt-bindings for TI's J7200 SoC dt-bindings: pci: ti,j721e: Fix "ti,syscon-pcie-ctrl" to take argument PCI: dwc: Set 32-bit DMA mask for MSI target address allocation PCI: qcom: Add support for configuring BDF to SID mapping for SM8250 PCI: Reduce pci_set_cacheline_size() message to debug level PCI: Remove unused HAVE_PCI_SET_MWI PCI: qcom: Add SM8250 SoC support ...
2020-12-15Merge tag 'acpi-5.11-rc1' of ↵Linus Torvalds21-211/+194
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to upstream revision 20201113, fix and clean up some resources manipulation code, extend the enumeration and gpio-line-names property documentation, clean up the handling of _DEP during device enumeration, add a new backlight DMI quirk, clean up transaction handling in the EC driver and make some assorted janitorial changes. Specifics: - Update ACPICA code in the kernel to upstream revision 20201113 with changes as follows: * Add 5 new UUIDs to the known UUID table (Bob Moore) * Remove extreaneous "the" in comments (Colin Ian King) * Add function trace macros to improve debugging (Erik Kaneda) * Fix interpreter memory leak (Erik Kaneda) * Handle "orphan" _REG for GPIO OpRegions (Hans de Goede) - Introduce resource_union() and resource_intersection() helpers and clean up some resource-manipulation code with the help of them (Andy Shevchenko) - Revert problematic commit related to the handling of resources in the ACPI core (Daniel Scally) - Extend the ACPI device enumeration documentation and the gpio-line-names _DSD property documentation, clean up the latter (Flavio Suligoi) - Clean up _DEP handling during device enumeration, modify the list of _DEP exceptions and the handling of it and fix up terminology related to _DEP (Hans de Goede, Rafael Wysocki) - Eliminate in_interrupt() usage from the ACPI EC driver (Sebastian Andrzej Siewior) - Clean up the advance_transaction() routine and related code in the ACPI EC driver (Rafael Wysocki) - Add new backlight quirk for GIGABYTE GB-BXBT-2807 (Jasper St Pierre) - Make assorted janitorial changes in several ACPI-related pieces of code (Hanjun Guo, Jason Yan, Punit Agrawal)" * tag 'acpi-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (40 commits) ACPI: scan: Fix up _DEP-related terminology with supplier/consumer ACPI: scan: Drop INT3396 from acpi_ignore_dep_ids[] ACPI: video: Add DMI quirk for GIGABYTE GB-BXBT-2807 Revert "ACPI / resources: Use AE_CTRL_TERMINATE to terminate resources walks" ACPI: scan: Add PNP0D80 to the _DEP exceptions list ACPI: scan: Call acpi_get_object_info() from acpi_add_single_object() ACPI: scan: Add acpi_info_matches_hids() helper ACPICA: Update version to 20201113 ACPICA: Interpreter: fix memory leak by using existing buffer ACPICA: Add function trace macros to improve debugging ACPICA: Also handle "orphan" _REG methods for GPIO OpRegions ACPICA: Remove extreaneous "the" in comments ACPICA: Add 5 new UUIDs to the known UUID table resource: provide meaningful MODULE_LICENSE() in test suite ASoC: Intel: catpt: Replace open coded variant of resource_intersection() ACPI: processor: Drop duplicate setting of shared_cpu_map ACPI: EC: Clean up status flags checks in advance_transaction() ACPI: EC: Untangle error handling in advance_transaction() ACPI: EC: Simplify error handling in advance_transaction() ACPI: EC: Rename acpi_ec_is_gpe_raised() ...
2020-12-15Merge tag 'pm-5.11-rc1' of ↵Linus Torvalds51-969/+1078
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These update cpufreq (core and drivers), cpuidle (polling state implementation and the PSCI driver), the OPP (operating performance points) framework, devfreq (core and drivers), the power capping RAPL (Running Average Power Limit) driver, the Energy Model support, the generic power domains (genpd) framework, the ACPI device power management, the core system-wide suspend code and power management utilities. Specifics: - Use local_clock() instead of jiffies in the cpufreq statistics to improve accuracy (Viresh Kumar). - Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq drivers (Viresh Kumar). - Clean up the cpufreq core, the intel_pstate driver and the schedutil cpufreq governor (Rafael Wysocki). - Fix up error code paths in the sti-cpufreq and mediatek cpufreq drivers (Yangtao Li, Qinglang Miao). - Fix cpufreq_online() to return error codes instead of success (0) in all cases when it fails (Wang ShaoBo). - Add mt8167 support to the mediatek cpufreq driver and blacklist mt8516 in the cpufreq-dt-platdev driver (Fabien Parent). - Modify the tegra194 cpufreq driver to always return values from the frequency table as the current frequency and clean up that driver (Sumit Gupta, Jon Hunter). - Modify the arm_scmi cpufreq driver to allow it to discover the power scale present in the performance protocol and provide this information to the Energy Model (Lukasz Luba). - Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali Rohár). - Clean up the CPPC cpufreq driver (Ionela Voinescu). - Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd Bergmann). - Rework the poling interval selection for the polling state in cpuidle (Mel Gorman). - Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle driver (Ulf Hansson). - Modify the OPP framework to support empty (node-less) OPP tables in DT for passing dependency information (Nicola Mazzucato). - Fix potential lockdep issue in the OPP core and clean up the OPP core (Viresh Kumar). - Modify dev_pm_opp_put_regulators() to accept a NULL argument and update its users accordingly (Viresh Kumar). - Add frequency changes tracepoint to devfreq (Matthias Kaehlcke). - Add support for governor feature flags to devfreq, make devfreq sysfs file permissions depend on the governor and clean up the devfreq core (Chanwoo Choi). - Clean up the tegra20 devfreq driver and deprecate it to allow another driver based on EMC_STAT to be used instead of it (Dmitry Osipenko). - Add interconnect support to the tegra30 devfreq driver, allow it to take the interconnect and OPP information from DT and clean it up (Dmitry Osipenko). - Add interconnect support to the exynos-bus devfreq driver along with interconnect properties documentation (Sylwester Nawrocki). - Add suport for AMD Fam17h and Fam19h processors to the RAPL power capping driver (Victor Ding, Kim Phillips). - Fix handling of overly long constraint names in the powercap framework (Lukasz Luba). - Fix the wakeup configuration handling for bridges in the ACPI device power management core (Rafael Wysocki). - Add support for using an abstract scale for power units in the Energy Model (EM) and document it (Lukasz Luba). - Add em_cpu_energy() micro-optimization to the EM (Pavankumar Kondeti). - Modify the generic power domains (genpd) framwework to support suspend-to-idle (Ulf Hansson). - Fix creation of debugfs nodes in genpd (Thierry Strudel). - Clean up genpd (Lina Iyer). - Clean up the core system-wide suspend code and make it print driver flags for devices with debug enabled (Alex Shi, Patrice Chotard, Chen Yu). - Modify the ACPI system reboot code to make it prepare for system power off to avoid confusing the platform firmware (Kai-Heng Feng). - Update the pm-graph (multiple changes, mostly usability-related) and cpupower (online and offline CPU information support) PM utilities (Todd Brandt, Brahadambal Srinivasan)" * tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits) cpufreq: Fix cpufreq_online() return value on errors cpufreq: Fix up several kerneldoc comments cpufreq: stats: Use local_clock() instead of jiffies cpufreq: schedutil: Simplify sugov_update_next_freq() cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate() PM: domains: create debugfs nodes when adding power domains opp: of: Allow empty opp-table with opp-shared dt-bindings: opp: Allow empty OPP tables media: venus: dev_pm_opp_put_*() accepts NULL argument drm/panfrost: dev_pm_opp_put_*() accepts NULL argument drm/lima: dev_pm_opp_put_*() accepts NULL argument PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table opp: Don't create an OPP table from dev_pm_opp_get_opp_table() cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table opp: Reduce the size of critical section in _opp_kref_release() PM / EM: Micro optimization in em_cpu_energy cpufreq: arm_scmi: Discover the power scale in performance protocol ...
2020-12-15Merge tag 'thermal-v5.11-rc1' of ↵Linus Torvalds24-748/+1209
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Add upper and lower limits clamps for the cooling device state in the power allocator governor (Michael Kao) - Add upper and lower limits support for the power allocator governor (Lukasz Luba) - Optimize conditions testing for the trip points (Bernard Zhao) - Replace spin_lock_irqsave by spin_lock in hard IRQ on the rcar driver (Tian Tao) - Add MT8516 dt-bindings and device reset optional support (Fabien Parent) - Add a quiescent period to cool down the PCH when entering S0iX (Sumeet Pawnikar) - Use bitmap API instead of re-inventing the wheel on sun8i (Yangtao Li) - Remove useless NULL check in the hwmon driver (Bernard Zhao) - Update the current state in the cpufreq cooling device only if the frequency change is effective (Zhuguangqing) - Improve the schema validation for the rcar DT bindings (Geert Uytterhoeven) - Fix the user time unit in the documentation (Viresh Kumar) - Add PCI ids for Lewisburg PCH (Andres Freund) - Add hwmon support on amlogic (Martin Blumenstingl) - Fix build failure for PCH entering on in S0iX (Randy Dunlap) - Improve the k_* coefficient for the power allocator governor (Lukasz Luba) - Fix missing const on a sysfs attribute (Rikard Falkeborn) - Remove broken interrupt support on rcar to be replaced by a new one (Niklas Söderlund) - Improve the error code handling at init time on imx8mm (Fabio Estevam) - Compute interval validity once instead at each temperature reading iteration on acerhdf (Daniel Lezcano) - Add r8a779a0 support (Niklas Söderlund) - Add PCI ids for AlderLake PCH and mmio refactoring (Srinivas Pandruvada) - Add RFIM and mailbox support on int340x (Srinivas Pandruvada) - Use macro for temperature calculation on PCH (Sumeet Pawnikar) - Simplify return conditions at probe time on Broadcom (Zheng Yongjun) - Fix workload name on PCH (Srinivas Pandruvada) - Migrate the devfreq cooling device code to the energy model API (Lukasz Luba) - Emit a warning if the thermal_zone_device_update is called without the .get_temp() ops (Daniel Lezcano) - Add critical and hot ops for the thermal zone (Daniel Lezcano) - Remove notification usage when critical is reached on rcar (Daniel Lezcano) - Fix devfreq build when ENERGY_MODEL is not set (Lukasz Luba) * tag 'thermal-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (45 commits) thermal/drivers/devfreq_cooling: Fix the build when !ENERGY_MODEL thermal/drivers/rcar: Remove notification usage thermal/core: Add critical and hot ops thermal/core: Emit a warning if the thermal zone is updated without ops drm/panfrost: Register devfreq cooling and attempt to add Energy Model thermal: devfreq_cooling: remove old power model and use EM thermal: devfreq_cooling: add new registration functions with Energy Model thermal: devfreq_cooling: use a copy of device status thermal: devfreq_cooling: change tracing function and arguments thermal: int340x: processor_thermal: Correct workload type name thermal: broadcom: simplify the return expression of bcm2711_thermal_probe() thermal: intel: pch: use macro for temperature calculation thermal: int340x: processor_thermal: Add mailbox driver thermal: int340x: processor_thermal: Add RFIM driver thermal: int340x: processor_thermal: Add AlderLake PCI device id thermal: int340x: processor_thermal: Refactor MMIO interface thermal: rcar_gen3_thermal: Add r8a779a0 support dt-bindings: thermal: rcar-gen3-thermal: Add r8a779a0 support platform/x86/drivers/acerhdf: Check the interval value when it is set platform/x86/drivers/acerhdf: Use module_param_cb to set/get polling interval ...
2020-12-15Merge branch 'for-linus' of ↵Linus Torvalds94-2194/+2550
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - support for inhibiting input devices at request from userspace. If a device implements open/close methods, it can also put device into low power state. This is needed, for example, to disable keyboard and touchpad on convertibles when they are transitioned into tablet mode - now that ordinary input devices can be configured for polling mode, dedicated input polling device implementation has been removed - GTCO tablet driver has been removed, as it used problematic custom HID parser, devices are EOL, and there is no interest from the manufacturer - a new driver for Dialog DA7280 haptic chips has been introduced - a new driver for power button on Dell Wyse 3020 - support for eKTF2132 in ektf2127 driver - support for SC2721 and SC2730 in sc27xx-vibra driver - enhancements for Atmel touchscreens, AD7846 touchscreens, Elan touchpads, ADP5589, ST1232 touchscreen, TM2 touchkey drivers - fixes and cleanups to allow clean builds with W=1 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (86 commits) Input: da7280 - fix spelling mistake "sequemce" -> "sequence" Input: cyapa_gen6 - fix out-of-bounds stack access Input: sc27xx - add support for sc2730 and sc2721 dt-bindings: input: Add compatible string for SC2721 and SC2730 dt-bindings: input: Convert sc27xx-vibra.txt to json-schema Input: stmpe - add axis inversion and swapping capability Input: adp5589-keys - do not explicitly control IRQ for wakeup Input: adp5589-keys - do not unconditionally configure as wakeup source Input: ipx4xx-beeper - convert comma to semicolon Input: parkbd - convert comma to semicolon Input: new da7280 haptic driver dt-bindings: input: Add document bindings for DA7280 MAINTAINERS: da7280 updates to the Dialog Semiconductor search terms Input: elantech - fix protocol errors for some trackpoints in SMBus mode Input: elan_i2c - add new trackpoint report type 0x5F Input: elants - document some registers and values Input: atmel_mxt_ts - simplify the return expression of mxt_send_bootloader_cmd() Input: imx_keypad - add COMPILE_TEST support Input: applespi - use new structure for SPI transfer delays Input: synaptics-rmi4 - use new structure for SPI transfer delays ...
2020-12-15Merge tag 'platform-drivers-x86-v5.11-1' of ↵Linus Torvalds50-252/+6166
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: "Highlights: - New driver for changing BIOS settings from within Linux on Dell devices. This introduces a new generic sysfs API for this. Lenovo is working on also supporting this API on their devices - New Intel PMT telemetry and crashlog drivers - Support for SW_TABLET_MODE reporting for the acer-wmi and intel-hid drivers - Preparation work for improving support for Microsoft Surface hardware - Various fixes / improvements / quirks for the panasonic-laptop and others" * tag 'platform-drivers-x86-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (81 commits) platform/x86: ISST: Mark mmio_range_devid_0 and mmio_range_devid_1 with static keyword platform/x86: intel-hid: add Rocket Lake ACPI device ID x86/platform: classmate-laptop: add WiFi media button platform/x86: mlx-platform: Fix item counter assignment for MSN2700/ComEx system platform/x86: mlx-platform: Fix item counter assignment for MSN2700, MSN24xx systems tools/power/x86/intel-speed-select: Update version for v5.11 tools/power/x86/intel-speed-select: Account for missing sysfs for die_id tools/power/x86/intel-speed-select: Read TRL from mailbox platform/x86: intel-hid: Do not create SW_TABLET_MODE input-dev when a KIOX010A ACPI dev is present platform/x86: intel-hid: Add alternative method to enable switches platform/x86: intel-hid: Add support for SW_TABLET_MODE platform/x86: intel-vbtn: Fix SW_TABLET_MODE always reporting 1 on some HP x360 models platform/x86: ISST: Change PCI device macros platform/x86: ISST: Allow configurable offset range platform/x86: ISST: Check for unaligned mmio address acer-wireless: send an EV_SYN/SYN_REPORT between state changes platform/x86: dell-wmi-sysman: work around for BIOS bug platform/x86: mlx-platform: remove an unused variable platform/x86: thinkpad_acpi: remove trailing semicolon in macro definition platform/x86: dell-smbios-base: Fix error return code in dell_smbios_init ...
2020-12-15Merge tag 'hwmon-for-v5.11' of ↵Linus Torvalds55-192/+3167
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "New drivers: - SB-TSI sensors - Lineat Technology LTC2992 - Delta power supplies Q54SJ108A2 - Maxim MAX127 - Corsair PSU - STMicroelectronics PM6764 Voltage Regulator New chip support: - P10 added to fsi/occ driver - NCT6687D added to nct6883 driver - Intel-based Xserves added to applesmc driver - AMD family 19h model 01h added to amd_energy driver And various minor bug fixes and improvements" * tag 'hwmon-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (41 commits) dt-bindings: (hwmon/sbtsi_temp) Add SB-TSI hwmon driver bindings hwmon: (sbtsi) Add documentation hwmon: (sbtsi) Add basic support for SB-TSI sensors hwmon: (iio_hwmon) Drop bogus __refdata annotation hwmon: (xgene) Drop bogus __refdata annotation dt-bindings: hwmon: convert AD ADM1275 bindings to dt-schema hwmon: (occ) Add new temperature sensor type fsi: occ: Add support for P10 dt-bindings: fsi: Add P10 OCC device documentation dt-bindings: hwmon: convert TI ADS7828 bindings to dt-schema dt-bindings: hwmon: convert AD AD741x bindings to dt-schema dt-bindings: hwmon: convert TI INA2xx bindings to dt-schema hwmon: (ltc2992) Fix less than zero comparisons with an unsigned integer hwmon: (pmbus/q54sj108a2) Correct title underline length dt-bindings: hwmon: Add documentation for ltc2992 hwmon: (ltc2992) Add support for GPIOs. hwmon: (ltc2992) Add support hwmon: (pmbus) Driver for Delta power supplies Q54SJ108A2 hwmon: Add driver for STMicroelectronics PM6764 Voltage Regulator hwmon: (nct6683) Support NCT6687D. ...
2020-12-15Merge tag 'mmc-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds44-376/+615
Pull MMC updates from Ulf Hansson: "MMC core: - Initial support for SD express card/host MMC host: - mxc: Convert the driver to DT-only - mtk-sd: Add HS400 enhanced strobe support - mtk-sd: Add support for the MT8192 SoC variant - sdhci-acpi: Allow changing HS200/HS400 driver strength for AMDI0040 - sdhci-esdhc-imx: Convert the driver to DT-only - sdhci-pci-gli: Improve performance for HS400 mode for GL9763E - sdhci-pci-gli: Reduce power consumption for GL9755 - sdhci-xenon: Introduce ACPI support - tmio: Fix command error processing - tmio: Inform the core about the max_busy_timeout - tmio/renesas_sdhi: Support custom calculation of busy-wait time - renesas_sdhi: Reset SCC only when available - rtsx_pci: Add SD Express mode support for RTS5261 - rtsx_pci: Various fixes and improvements for RTS5261 MEMSTICK: - Minor fixes/improvements" * tag 'mmc-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (72 commits) dt-bindings: mmc: eliminate yamllint warnings mmc: sdhci-xenon: introduce ACPI support mmc: sdhci-xenon: use clk only with DT mmc: sdhci-xenon: switch to device_* API mmc: sdhci-xenon: use match data for controllers variants dt-bindings: mmc: Fix xlnx,mio-bank property values for arasan driver mmc: renesas_sdhi: populate hook for longer busy_wait mmc: tmio: add hook for custom busy_wait calculation mmc: tmio: set max_busy_timeout dt-bindings: mmc: imx: fix the wrongly dropped imx8qm compatible string mmc: sdhci-pci-gli: Disable slow mode in HS400 mode for GL9763E mmc: sdhci: Use more concise device_property_read_u64 memstick: r592: Fix error return in r592_probe() mmc: mxc: Convert the driver to DT-only mmc: mxs: Remove the unused .id_table mmc: sdhci-of-arasan: Fix fall-through warnings for Clang mmc: sdhci-pci-gli: Reduce power consumption for GL9755 mmc: mediatek: depend on COMMON_CLK to fix compile tests mmc: pxamci: Fix error return code in pxamci_probe mmc: sdhci: Update firmware interface API ...
2020-12-15Merge branch 'i2c/for-5.11' of ↵Linus Torvalds18-266/+455
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "A bit smaller this time with mostly usual driver updates. Slave support for imx stands out a little" * 'i2c/for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (30 commits) i2c: remove check that can never be true i2c: Warn when device removing fails dt-bindings: i2c: Update DT binding docs to support SiFive FU740 SoC dt-bindings: i2c: Add compatible string for AM64 SoC i2c: designware: Make register offsets all of the same width i2c: designware: Switch header to use BIT() and GENMASK() i2c: pxa: move to generic GPIO recovery i2c: sh_mobile: Mark adapter suspended during suspend i2c: owl: Add compatible for the Actions Semi S500 I2C controller dt-bindings: i2c: owl: Convert Actions Semi Owl binding to a schema i2c: imx: support slave mode for imx I2C driver i2c: ismt: Adding support for I2C_SMBUS_BLOCK_PROC_CALL i2c: ocores: Avoid false-positive error log message. Revert "i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630" i2c: mxs: Remove unneeded platform_device_id i2c: pca-platform: drop two members from driver data that are assigned to only i2c: imx: Remove unused .id_table support i2c: nvidia-gpu: drop empty stub for runtime pm dt-bindings: i2c: mellanox,i2c-mlxbf: convert txt to YAML schema i2c: mv64xxx: Add bus error recovery ...
2020-12-15Merge tag 'spi-v5.11' of ↵Linus Torvalds45-235/+446
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The big change this release has been some excellent work from Lukas Wunner which closes a bunch of holes in the cleanup paths for drivers, mainly introduced as a result of devm conversions causing bad interactions with the support SPI has for allocating the bus and driver data together. Together with some of the other work done it feels like we've turned the corner on several long standing pain points with the API. Summary: - Many cleanups around probe/remove and error handling from Lukas Wunner and Uwe Kleine-König, and further fixes around PM from Zhang Qilong. - Provide a mask for which bits of the mode can safely be configured by drivers and use that to fix an issue with the ADS7846 driver. - Documentation of the expected interactions between SPI and GPIO level chip select polarity configuration from H. Nikolaus Schaller, hopefully we're pretty much at the end of sorting out the interactions there. Thanks to Nikolaus, Sven Van Asbroeck and Linus Walleij for this. - DMA support for Allwinner sun6i controllers. - Support for Canaan K210 Designware implementations and Intel Adler Lake" * tag 'spi-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (69 commits) spi: dt-bindings: clarify CS behavior for spi-cs-high and gpio descriptors spi: Limit the spi device max speed to controller's max speed spi: spi-geni-qcom: Use the new method of gpio CS control platform/chrome: cros_ec_spi: Drop bits_per_word assignment platform/chrome: cros_ec_spi: Don't overwrite spi::mode spi: dw: Add support for the Canaan K210 SoC SPI spi: dw: Add support for 32-bits max xfer size dt-bindings: spi: dw-apb-ssi: Add Canaan K210 SPI controller spi: Update DT binding docs to support SiFive FU740 SoC spi: atmel-quadspi: Fix use-after-free on unbind spi: npcm-fiu: Disable clock in probe error path spi: ar934x: Don't leak SPI master in probe error path spi: mt7621: Don't leak SPI master in probe error path spi: mt7621: Disable clock in probe error path media: netup_unidvb: Don't leak SPI master in probe error path spi: sc18is602: Don't leak SPI master in probe error path spi: rb4xx: Don't leak SPI master in probe error path spi: gpio: Don't leak SPI master in probe error path spi: spi-mtk-nor: Don't leak SPI master in probe error path spi: mxic: Don't leak SPI master in probe error path ...
2020-12-15Merge tag 'regulator-v5.11' of ↵Linus Torvalds23-77/+3158
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "This has been a quiet release for the regulator API, a few new drivers and the usual fixes and cleanup traffic but not much else going on: - Optimisations for the handling of voltage enumeration, especially with sparse selector sets, from Claudiu Beznea. - Support for several ARM SCMI regulators, Dialog DA9121, NXP PF8x00, Qualcomm PMX55, PM8350 and PM8350c The addition of the SCMI regulator driver (which controls regulators via system firmware) means that we've pulled in the support for the underlying firmware operations from the firmware tree" * tag 'regulator-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (53 commits) regulator: mc13892-regulator: convert comma to semicolon regulator: pfuze100: Convert the driver to DT-only regulator: max14577: Add proper module aliases strings regulator: da9121: Potential Oops in da9121_assign_chip_model() regulator: da9121: Fix index used for DT property regulator: da9121: Remove uninitialised string variable regulator: axp20x: Fix DLDO2 voltage control register mask for AXP22x regulator: qcom-rpmh: Add support for PM8350/PM8350c regulator: dt-bindings: Add PM8350x compatibles regulator: da9121: include linux/gpio/consumer.h regulator: da9121: Mark some symbols with static keyword regulator: da9121: Request IRQ directly and free in release function to avoid masking race regulator: da9121: add interrupt support regulator: da9121: add mode support regulator: da9121: add current support regulator: da9121: Update registration to support multiple buck variants regulator: da9121: Add support for device variants via devicetree regulator: da9121: Add device variant descriptors regulator: da9121: Add device variant regmaps regulator: da9121: Add device variants ...
2020-12-15Merge tag 'regmap-v5.11' of ↵Linus Torvalds4-13/+91
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "This is quite a busy release for regmap with two substantial features being added: - Support for register maps Soundwire 1.2 multi-byte operations, allowing atomic support for registers larger than a single byte. - Support for relaxed I/O without barriers in MMIO regmaps, allowing them to be used efficiently on systems where default MMIO operations include barriers. There was also an addition and revert of use of the new Soundwire support for RT715 due to build issues with the driver built in, my tests only covered building it as a module, the patch wasn't just dropped as it had already been merged elsewhere" * tag 'regmap-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: ASoC: rt715: Fix build regmap: sdw: add required header files regmap: Remove duplicate `type` field from regmap `regcache_sync` trace event regmap: Fix order of regmap write log regmap: mmio: add config option to allow relaxed MMIO accesses
2020-12-15Merge tag 'irq-core-2020-12-15' of ↵Linus Torvalds21-264/+316
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Generic interrupt and irqchips subsystem updates. Unusually, there is not a single completely new irq chip driver, just new DT bindings and extensions of existing drivers to accomodate new variants! Core: - Consolidation and robustness changes for irq time accounting - Cleanup and consolidation of irq stats - Remove the fasteoi IPI flow which has been proved useless - Provide an interface for converting legacy interrupt mechanism into irqdomains Drivers: - Preliminary support for managed interrupts on platform devices - Correctly identify allocation of MSIs proxyied by another device - Generalise the Ocelot support to new SoCs - Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation - Work around spurious interrupts on Qualcomm PDC - Random fixes and cleanups" * tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits) irqchip/qcom-pdc: Fix phantom irq when changing between rising/falling driver core: platform: Add devm_platform_get_irqs_affinity() ACPI: Drop acpi_dev_irqresource_disabled() resource: Add irqresource_disabled() genirq/affinity: Add irq_update_affinity_desc() irqchip/gic-v3-its: Flag device allocation as proxied if behind a PCI bridge irqchip/gic-v3-its: Tag ITS device as shared if allocating for a proxy device platform-msi: Track shared domain allocation irqchip/ti-sci-intr: Fix freeing of irqs irqchip/ti-sci-inta: Fix printing of inta id on probe success drivers/irqchip: Remove EZChip NPS interrupt controller Revert "genirq: Add fasteoi IPI flow" irqchip/hip04: Make IPIs use handle_percpu_devid_irq() irqchip/bcm2836: Make IPIs use handle_percpu_devid_irq() irqchip/armada-370-xp: Make IPIs use handle_percpu_devid_irq() irqchip/gic, gic-v3: Make SGIs use handle_percpu_devid_irq() irqchip/ocelot: Add support for Jaguar2 platforms irqchip/ocelot: Add support for Serval platforms irqchip/ocelot: Add support for Luton platforms irqchip/ocelot: prepare to support more SoC ...
2020-12-15Merge tag 'staging-5.11-rc1' of ↵Linus Torvalds221-6135/+4151
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging / IIO driver updates from Greg KH: "Here is the big staging and IIO driver pull request for 5.11-rc1 Lots of different things in here: - loads of driver updates - so many coding style cleanups - new IIO drivers - Android ION code is finally removed from the tree - wimax drivers are moved to staging on their way out of the kernel Nothing really exciting, just the constant grind of kernel development :) All have been in linux-next for a while with no reported issues" * tag 'staging-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (341 commits) staging: olpc_dcon: Do not call platform_device_unregister() in dcon_probe() staging: most: Fix spelling mistake "tranceiver" -> "transceiver" staging: qlge: remove duplicate word in comment staging: comedi: mf6x4: Fix AI end-of-conversion detection staging: greybus: Add TODO item about modernizing the pwm code pinctrl: ralink: add a pinctrl driver for the rt2880 family dt-bindings: pinctrl: rt2880: add binding document staging: rtl8723bs: remove ELEMENT_ID enum staging: rtl8723bs: remove unused macros staging: rtl8723bs: replace EID_EXTCapability staging: rtl8723bs: replace EID_BSSIntolerantChlReport staging: rtl8723bs: replace EID_BSSCoexistence staging: rtl8723bs: replace _MME_IE_ staging: rtl8723bs: replace _WAPI_IE_ staging: rtl8723bs: replace _EXT_SUPPORTEDRATES_IE_ staging: rtl8723bs: replace _ERPINFO_IE_ staging: rtl8723bs: replace _CHLGETXT_IE_ staging: rtl8723bs: replace _COUNTRY_IE_ staging: rtl8723bs: replace _IBSS_PARA_IE_ staging: rtl8723bs: replace _TIM_IE_ ...
2020-12-15Merge tag 'char-misc-5.11-rc1' of ↵Linus Torvalds255-3790/+22693
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the big char/misc driver update for 5.11-rc1. Continuing the tradition of previous -rc1 pulls, there seems to be more and more tiny driver subsystems flowing through this tree. Lots of different things, all of which have been in linux-next for a while with no reported issues: - extcon driver updates - habannalab driver updates - mei driver updates - uio driver updates - binder fixes and features added - soundwire driver updates - mhi bus driver updates - phy driver updates - coresight driver updates - fpga driver updates - speakup driver updates - slimbus driver updates - various small char and misc driver updates" * tag 'char-misc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (305 commits) extcon: max77693: Fix modalias string extcon: fsa9480: Support TI TSU6111 variant extcon: fsa9480: Rewrite bindings in YAML and extend dt-bindings: extcon: add binding for TUSB320 extcon: Add driver for TI TUSB320 slimbus: qcom: fix potential NULL dereference in qcom_slim_prg_slew() siox: Make remove callback return void siox: Use bus_type functions for probe, remove and shutdown spmi: Add driver shutdown support spmi: fix some coding style issues at the spmi core spmi: get rid of a warning when built with W=1 uio: uio_hv_generic: use devm_kzalloc() for private data alloc uio: uio_fsl_elbc_gpcm: use device-managed allocators uio: uio_aec: use devm_kzalloc() for uio_info object uio: uio_cif: use devm_kzalloc() for uio_info object uio: uio_netx: use devm_kzalloc() for or uio_info object uio: uio_mf624: use devm_kzalloc() for uio_info object uio: uio_sercos3: use device-managed functions for simple allocs uio: uio_dmem_genirq: finalize conversion of probe to devm_ handlers uio: uio_dmem_genirq: convert simple allocations to device-managed ...
2020-12-15Merge tag 'driver-core-5.11-rc1' of ↵Linus Torvalds20-711/+760
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big driver core updates for 5.11-rc1 This time there was a lot of different work happening here for some reason: - redo of the fwnode link logic, speeding it up greatly - auxiliary bus added (this was a tag that will be pulled in from other trees/maintainers this merge window as well, as driver subsystems started to rely on it) - platform driver core cleanups on the way to fixing some long-time api updates in future releases - minor fixes and tweaks. All have been in linux-next with no (finally) reported issues. Testing there did helped in shaking issues out a lot :)" * tag 'driver-core-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (39 commits) driver core: platform: don't oops in platform_shutdown() on unbound devices ACPI: Use fwnode_init() to set up fwnode misc: pvpanic: Replace OF headers by mod_devicetable.h misc: pvpanic: Combine ACPI and platform drivers usb: host: sl811: Switch to use platform_get_mem_or_io() vfio: platform: Switch to use platform_get_mem_or_io() driver core: platform: Introduce platform_get_mem_or_io() dyndbg: fix use before null check soc: fix comment for freeing soc_dev_attr driver core: platform: use bus_type functions driver core: platform: change logic implementing platform_driver_probe driver core: platform: reorder functions driver core: make driver_probe_device() static driver core: Fix a couple of typos driver core: Reorder devices on successful probe driver core: Delete pointless parameter in fwnode_operations.add_links driver core: Refactor fw_devlink feature efi: Update implementation of add_links() to create fwnode links of: property: Update implementation of add_links() to create fwnode links driver core: Use device's fwnode to check if it is waiting for suppliers ...
2020-12-15Merge tag 'tty-5.11-rc1' of ↵Linus Torvalds53-14938/+429
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is the "large" set of tty and serial patches for 5.11-rc1. Nothing major at all, some cleanups and some driver removals, always a nice sign: - build warning cleanups - vt locking and logic unwinding and cleanups - tiny serial driver fixes and updates - removal of the synclink serial driver as it's no longer needed - removal of dead termiox code All of this has been in linux-next for a while with no reported issues" * tag 'tty-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (89 commits) serial: 8250_pci: Drop bogus __refdata annotation tty: serial: meson: enable console as module serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access serial: imx: Move imx_uart_probe_dt() content into probe() serial: imx: Remove unneeded of_device_get_match_data() NULL check tty: Fix whitespace inconsistencies in vt_io_ioctl serial_core: Check for port state when tty is in error state dt-bindings: serial: Update DT binding docs to support SiFive FU740 SoC tty: use const parameters in port-flag accessors tty: use assign_bit() in port-flag accessors earlycon: drop semicolon from earlycon macro tty: Remove dead termiox code tty/serial/imx: Enable TXEN bit in imx_poll_init(). tty : serial: jsm: Fixed file by adding spacing tty: serial: uartlite: Support probe deferral earlycon: simplify earlycon-table implementation tty: serial: bcm63xx: lower driver dependencies serial: mxs-auart: Remove unneeded platform_device_id serial: 8250-mtk: Fix reference leak in mtk8250_probe serial: imx: Remove unused .id_table support ...
2020-12-15Merge tag 'usb-5.11-rc1' of ↵Linus Torvalds130-4631/+3873
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big USB and thunderbolt pull request for 5.11-rc1. Nothing major in here, just the grind of constant development to support new hardware and fix old issues: - thunderbolt updates for new USB4 hardware - cdns3 major driver updates - lots of typec updates and additions as more hardware is available - usb serial driver updates and fixes - other tiny USB driver updates All have been in linux-next with no reported issues" * tag 'usb-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits) usb: phy: convert comma to semicolon usb: ucsi: convert comma to semicolon usb: typec: tcpm: convert comma to semicolon usb: typec: tcpm: Update vbus_vsafe0v on init usb: typec: tcpci: Enable bleed discharge when auto discharge is enabled usb: typec: Add class for plug alt mode device USB: typec: tcpci: Add Bleed discharge to POWER_CONTROL definition USB: typec: tcpm: Add a 30ms room for tPSSourceOn in PR_SWAP USB: typec: tcpm: Fix PR_SWAP error handling USB: typec: tcpm: Hard Reset after not receiving a Request USB: gadget: f_fs: remove likely/unlikely usb: gadget: f_fs: Re-use SS descriptors for SuperSpeedPlus USB: gadget: f_midi: setup SuperSpeed Plus descriptors USB: gadget: f_acm: add support for SuperSpeed Plus USB: gadget: f_rndis: fix bitrate for SuperSpeed and above usb: typec: intel_pmc_mux: Configure cable generation value for USB4 MAINTAINERS: Add myself as a reviewer for CADENCE USB3 DRD IP DRIVER usb: chipidea: ci_hdrc_imx: Use of_device_get_match_data() usb: chipidea: usbmisc_imx: Use of_device_get_match_data() usb: cdns3: fix NULL pointer dereference on no platform data ...
Powered by cgit, Gruvboxed by Blaster4385.