aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2024-09-06Merge tag 'drm-misc-fixes-2024-09-05' of ↵Dave Airlie30-41/+185
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes A zpos normalization fix for komeda, a register bitmask fix for nouveau, a memory leak fix for imagination, three fixes for the recent bridge HDMI work, a potential DoS fix and a cache coherency for panthor, a change of panel compatible and a deferred-io fix when used with non-highmem memory. Signed-off-by: Dave Airlie <[email protected]> From: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20240905-original-radical-guan-e7a2ae@houat
2024-09-06Merge tag 'drm-xe-fixes-2024-09-05' of ↵Dave Airlie14-89/+124
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes - GSC loading fix (Daniele) - PCODE mutex fix (Matt) - Suspend/Resume fixes (Maarten, Imre) - RPM fixes (Rodrigo) Signed-off-by: Dave Airlie <[email protected]> From: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-09-05drm/fbdev-dma: Only install deferred I/O if necessaryThomas Zimmermann1-19/+64
Deferred I/O requires struct page for framebuffer memory, which is not guaranteed for all DMA ranges. We thus only install deferred I/O if we have a framebuffer that requires it. A reported bug affected the ipu-v3 and pl111 drivers, which have video memory in either Normal or HighMem zones [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff] where deferred I/O only works correctly with HighMem. See the Closes tags for bug reports. v2: - test if screen_buffer supports deferred I/O (Sima) Signed-off-by: Thomas Zimmermann <[email protected]> Fixes: 808a40b69468 ("drm/fbdev-dma: Implement damage handling and deferred I/O") Reported-by: Alexander Stein <[email protected]> Closes: https://lore.kernel.org/all/23636953.6Emhk5qWAg@steina-w/ Reported-by: Linus Walleij <[email protected]> Closes: https://lore.kernel.org/dri-devel/CACRpkdb+hb9AGavbWpY-=uQQ0apY9en_tWJioPKf_fAbXMP4Hg@mail.gmail.com/ Tested-by: Alexander Stein <[email protected]> Tested-by: Linus Walleij <[email protected]> Cc: Thomas Zimmermann <[email protected]> Cc: Javier Martinez Canillas <[email protected]> Cc: Maarten Lankhorst <[email protected]> Cc: Maxime Ripard <[email protected]> Reviewed-by: Simona Vetter <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-09-05drm/panthor: flush FW AS caches in slow reset pathAdrián Larumbe3-4/+26
In the off-chance that waiting for the firmware to signal its booted status timed out in the fast reset path, one must flush the cache lines for the entire FW VM address space before reloading the regions, otherwise stale values eventually lead to a scheduler job timeout. Fixes: 647810ec2476 ("drm/panthor: Add the MMU/VM logical block") Cc: [email protected] Signed-off-by: Adrián Larumbe <[email protected]> Acked-by: Liviu Dudau <[email protected]> Reviewed-by: Steven Price <[email protected]> Reviewed-by: Boris Brezillon <[email protected]> Signed-off-by: Boris Brezillon <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-09-05drm: panel: nv3052c: Correct WL-355608-A8 panel compatibleRyan Walklin1-1/+1
As per the previous dt-binding commit, update the WL-355608-A8 panel compatible to reflect the the integrating device vendor and name as the panel OEM is unknown. Fixes: 62ea2eeba7bf ("drm: panel: nv3052c: Add WL-355608-A8 panel") Signed-off-by: Ryan Walklin <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-09-05drm/panthor: Restrict high priorities on group_createMary Guillemard2-1/+24
We were allowing any users to create a high priority group without any permission checks. As a result, this was allowing possible denial of service. We now only allow the DRM master or users with the CAP_SYS_NICE capability to set higher priorities than PANTHOR_GROUP_PRIORITY_MEDIUM. As the sole user of that uAPI lives in Mesa and hardcode a value of MEDIUM [1], this should be safe to do. Additionally, as those checks are performed at the ioctl level, panthor_group_create now only check for priority level validity. [1]https://gitlab.freedesktop.org/mesa/mesa/-/blob/f390835074bdf162a63deb0311d1a6de527f9f89/src/gallium/drivers/panfrost/pan_csf.c#L1038 Signed-off-by: Mary Guillemard <[email protected]> Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block") Cc: [email protected] Reviewed-by: Boris Brezillon <[email protected]> Signed-off-by: Boris Brezillon <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-09-04drm/xe/display: Avoid encoder_suspend at runtime suspendRodrigo Vivi1-3/+3
Fix circular locking dependency on runtime suspend. <4> [74.952215] ====================================================== <4> [74.952217] WARNING: possible circular locking dependency detected <4> [74.952219] 6.10.0-rc7-xe #1 Not tainted <4> [74.952221] ------------------------------------------------------ <4> [74.952223] kworker/7:1/82 is trying to acquire lock: <4> [74.952226] ffff888120548488 (&dev->mode_config.mutex){+.+.}-{3:3}, at: drm_modeset_lock_all+0x40/0x1e0 [drm] <4> [74.952260] but task is already holding lock: <4> [74.952262] ffffffffa0ae59c0 (xe_pm_runtime_lockdep_map){+.+.}-{0:0}, at: xe_pm_runtime_suspend+0x2f/0x340 [xe] <4> [74.952322] which lock already depends on the new lock. The commit 'b1d90a86 ("drm/xe: Use the encoder suspend helper also used by the i915 driver")' didn't do anything wrong. It actually fixed a critical bug, because the encoder_suspend was never getting actually called because it was returning if (has_display(xe)) instead of if (!has_display(xe)). However, this ended up introducing the encoder suspend calls in the runtime routines as well, causing the circular locking dependency. Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2304 Fixes: b1d90a862c89 ("drm/xe: Use the encoder suspend helper also used by the i915 driver") Cc: Imre Deak <[email protected]> Reviewed-by: Jonathan Cavitt <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Rodrigo Vivi <[email protected]> (cherry picked from commit 8da19441d0a02b53e362df81843bb20db3a8006a) Signed-off-by: Rodrigo Vivi <[email protected]>
2024-09-04drm/xe: Suspend/resume user access only during system s/rImre Deak1-4/+6
Enable/Disable user access only during system suspend/resume. This should not happen during runtime s/r v2: rebased Reviewed-by: Arun R Murthy <[email protected]> Signed-off-by: Imre Deak <[email protected]> Signed-off-by: Vinod Govindapillai <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit a64e7e5b05e014dad9ae5858c9644d61400ec6ef) Signed-off-by: Rodrigo Vivi <[email protected]>
2024-09-04drm/xe/display: Match i915 driver suspend/resume sequences betterMaarten Lankhorst1-5/+14
Suspend fbdev sooner, and disable user access before suspending to prevent some races. I've noticed this when comparing xe suspend to i915's. Matches the following commits from i915: 24b412b1bfeb ("drm/i915: Disable intel HPD poll after DRM poll init/enable") 1ef28d86bea9 ("drm/i915: Suspend the framebuffer console earlier during system suspend") bd738d859e71 ("drm/i915: Prevent modesets during driver init/shutdown") Thanks to Imre for pointing me to those commits. Driver shutdown is currently missing, but I have some idea how to implement it next. Signed-off-by: Maarten Lankhorst <[email protected]> Cc: Imre Deak <[email protected]> Reviewed-by: Uma Shankar <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Maarten Lankhorst,,, <[email protected]> (cherry picked from commit 492be2a070f023c66aaef6ebd664567fda28c2a6) Signed-off-by: Rodrigo Vivi <[email protected]>
2024-09-04drm/xe: Add missing runtime reference to wedged upon gt_resetRodrigo Vivi1-2/+3
Fixes this missed case: xe 0000:00:02.0: [drm] Missing outer runtime PM protection WARNING: CPU: 99 PID: 1455 at drivers/gpu/drm/xe/xe_pm.c:564 xe_pm_runtime_get_noresume+0x48/0x60 [xe] Call Trace: <TASK> ? show_regs+0x67/0x70 ? __warn+0x94/0x1b0 ? xe_pm_runtime_get_noresume+0x48/0x60 [xe] ? report_bug+0x1b7/0x1d0 ? handle_bug+0x46/0x80 ? exc_invalid_op+0x19/0x70 ? asm_exc_invalid_op+0x1b/0x20 ? xe_pm_runtime_get_noresume+0x48/0x60 [xe] xe_device_declare_wedged+0x91/0x280 [xe] gt_reset_worker+0xa2/0x250 [xe] v2: Also move get and get the right Fixes tag (Himal, Brost) Fixes: fb74b205cdd2 ("drm/xe: Introduce a simple wedged state") Cc: Himal Prasad Ghimiray <[email protected]> Cc: Matthew Brost <[email protected]> Reviewed-by: Jonathan Cavitt <[email protected]> Reviewed-by: Himal Prasad Ghimiray <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Rodrigo Vivi <[email protected]> (cherry picked from commit bc947d9a8c3ebd207e52c0e35cfc88f3e1abe54f) Signed-off-by: Rodrigo Vivi <[email protected]>
2024-09-03drm/xe/pcode: Treat pcode as per-tile rather than per-GTMatt Roper11-79/+85
There's only one instance of the pcode per tile, and for GT-related accesses both the primary and media GT share the same register interface. Since Xe was using per-GT locking, the pcode mutex wasn't actually protecting everything that it should since concurrent accesses related to a tile's primary GT and media GT were possible. Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Signed-off-by: Matt Roper <[email protected]> Reviewed-by: Lucas De Marchi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 3034cc8107b8d0c7d1b56584394e215dab57f8a3) Signed-off-by: Rodrigo Vivi <[email protected]>
2024-09-03drm/xe/gsc: Do not attempt to load the GSC multiple timesDaniele Ceraolo Spurio2-2/+19
The GSC HW is only reset by driver FLR or D3cold entry. We don't support the former at runtime, while the latter is only supported on DGFX, for which we don't support GSC. Therefore, if GSC failed to load previously there is no need to try again because the HW is stuck in the error state. An assert has been added so that if we ever add DGFX support we'll know we need to handle the D3 case. v2: use "< 0" instead of "!= 0" in the FW state error check (Julia). Fixes: dd0e89e5edc2 ("drm/xe/gsc: GSC FW load") Signed-off-by: Daniele Ceraolo Spurio <[email protected]> Cc: John Harrison <[email protected]> Cc: Alan Previn <[email protected]> Cc: <[email protected]> # v6.8+ Reviewed-by: Julia Filipchuk <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 2160f6f6e3cf6893a83357c3b82ff8589bdc0f08) Signed-off-by: Rodrigo Vivi <[email protected]>
2024-09-03drm/bridge-connector: reset the HDMI connector stateDmitry Baryshkov2-1/+13
On HDMI connectors which use drm_bridge_connector and DRM_BRIDGE_OP_HDMI IGT chokes on the max_bpc property in several kms_properties tests due to the drm_bridge_connector failing to reset HDMI-related properties. Call __drm_atomic_helper_connector_hdmi_reset() if the drm_bridge_connector has bridge_hdmi. It is impossible to call this function from HDMI bridges, none of the bridge callbacks correspond to the drm_connector_funcs::reset(). Fixes: 6b4468b0c6ba ("drm/bridge-connector: implement glue code for HDMI connector") Reviewed-by: Maxime Ripard <[email protected]> Acked-by: Maxime Ripard <[email protected]> Reviewed-by: Abhinav Kumar <[email protected]> Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-3-daebde6d9857@linaro.org Signed-off-by: Maxime Ripard <[email protected]>
2024-09-03drm/bridge-connector: move to DRM_DISPLAY_HELPER moduleDmitry Baryshkov20-1/+37
drm_bridge_connector is a "leaf" driver, belonging to the display helper, rather than the "CRTC" drm_kms_helper module. Move the driver to the drm/display and add necessary Kconfig selection clauses. Suggested-by: Maxime Ripard <[email protected]> Acked-by: Maxime Ripard <[email protected]> Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-2-daebde6d9857@linaro.org Signed-off-by: Maxime Ripard <[email protected]>
2024-09-03drm/display: stop depending on DRM_DISPLAY_HELPERDmitry Baryshkov1-10/+8
Kconfig symbols should not declare dependency on DRM_DISPLAY_HELPER. Move all parts of DRM_DISPLAY_HELPER to an if DRM_DISPLAY_HELPER block. It is not possible to make those symbols select DRM_DISPLAY_HELPER because of the link issues when a part of the helper is selected to be built-in, while other part is selected to be as module. In such a case the modular part doesn't get built at all, leading to undefined symbols. The only viable alternative is to split drm_display_helper.ko into several small modules, each of them having their own dependencies. Suggested-by: Maxime Ripard <[email protected]> Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-1-daebde6d9857@linaro.org Signed-off-by: Maxime Ripard <[email protected]>
2024-09-03drm/i915/display: Increase Fast Wake Sync length as a quirkJouni Högander5-8/+32
In commit "drm/i915/display: Increase number of fast wake precharge pulses" we were increasing Fast Wake sync pulse length to fix problems observed on Dell Precision 5490 laptop with AUO panel. Later we have observed this is causing problems on other panels. Fix these problems by increasing Fast Wake sync pulse length as a quirk applied for Dell Precision 5490 with problematic panel. Fixes: f77772866385 ("drm/i915/display: Increase number of fast wake precharge pulses") Cc: Ville Syrjälä <[email protected]> Closes: http://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9739 Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2246 Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11762 Signed-off-by: Jouni Högander <[email protected]> Reviewed-by: Jani Nikula <[email protected]> Cc: <[email protected]> # v6.10+ Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit fcba2ed66b39252210f4e739722ebcc5398c2197) Requires: 43cf50eb1408 ("drm/i915/display: Add mechanism to use sink model when applying quirk") Signed-off-by: Joonas Lahtinen <[email protected]>
2024-09-03drm/i915/display: Add mechanism to use sink model when applying quirkJouni Högander4-0/+64
Currently there is no way to apply quirk on device only if certain panel model is installed. This patch implements such mechanism by adding new quirk type intel_dpcd_quirk which contains also sink_oui and sink_device_id fields and using also them to figure out if applying quirk is needed. New intel_init_dpcd_quirks is added and called after drm_dp_read_desc with proper sink device identity read from dpcdc. v3: - !mem_is_zero fixed to mem_is_zero v2: - instead of using struct intel_quirk add new struct intel_dpcd_quirk Signed-off-by: Jouni Högander <[email protected]> Reviewed-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit b3b91369908ac63be6f64905448b8ba5cd151875) Signed-off-by: Joonas Lahtinen <[email protected]>
2024-09-02drm/i915/fence: Mark debug_fence_free() with __maybe_unusedAndy Shevchenko1-2/+2
When debug_fence_free() is unused (CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS=n), it prevents kernel builds with clang, `make W=1` and CONFIG_WERROR=y: .../i915_sw_fence.c:118:20: error: unused function 'debug_fence_free' [-Werror,-Wunused-function] 118 | static inline void debug_fence_free(struct i915_sw_fence *fence) | ^~~~~~~~~~~~~~~~ Fix this by marking debug_fence_free() with __maybe_unused. See also commit 6863f5643dd7 ("kbuild: allow Clang to find unused static inline functions for W=1 build"). Fixes: fc1584059d6c ("drm/i915: Integrate i915_sw_fence with debugobjects") Signed-off-by: Andy Shevchenko <[email protected]> Reviewed-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Jani Nikula <[email protected]> (cherry picked from commit 8be4dce5ea6f2368cc25edc71989c4690fa66964) Signed-off-by: Joonas Lahtinen <[email protected]>
2024-09-02drm/i915/fence: Mark debug_fence_init_onstack() with __maybe_unusedAndy Shevchenko1-2/+2
When debug_fence_init_onstack() is unused (CONFIG_DRM_I915_SELFTEST=n), it prevents kernel builds with clang, `make W=1` and CONFIG_WERROR=y: .../i915_sw_fence.c:97:20: error: unused function 'debug_fence_init_onstack' [-Werror,-Wunused-function] 97 | static inline void debug_fence_init_onstack(struct i915_sw_fence *fence) | ^~~~~~~~~~~~~~~~~~~~~~~~ Fix this by marking debug_fence_init_onstack() with __maybe_unused. See also commit 6863f5643dd7 ("kbuild: allow Clang to find unused static inline functions for W=1 build"). Fixes: 214707fc2ce0 ("drm/i915/selftests: Wrap a timer into a i915_sw_fence") Signed-off-by: Andy Shevchenko <[email protected]> Reviewed-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Jani Nikula <[email protected]> (cherry picked from commit 5bf472058ffb43baf6a4cdfe1d7f58c4c194c688) Signed-off-by: Joonas Lahtinen <[email protected]>
2024-09-02drm/i915: Fix readout degamma_lut mismatch on ilk/snbVille Syrjälä1-5/+26
On ilk/snb the pipe may be configured to place the LUT before or after the CSC depending on various factors, but as there is only one LUT (no split mode like on IVB+) we only advertise a gamma_lut and no degamma_lut in the uapi to avoid confusing userspace. This can cause a problem during readout if the VBIOS/GOP enabled the LUT in the pre CSC configuration. The current code blindly assigns the results of the readout to the degamma_lut, which will cause a failure during the next atomic_check() as we aren't expecting anything to be in degamma_lut since it's not visible to userspace. Fix the problem by assigning whatever LUT we read out from the hardware into gamma_lut. Cc: [email protected] Fixes: d2559299d339 ("drm/i915: Make ilk_read_luts() capable of degamma readout") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11608 Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Uma Shankar <[email protected]> (cherry picked from commit 33eca84db6e31091cef63584158ab64704f78462) Signed-off-by: Joonas Lahtinen <[email protected]>
2024-09-02drm/i915: Do not attempt to load the GSC multiple timesDaniele Ceraolo Spurio2-1/+6
If the GSC FW fails to load the GSC HW hangs permanently; the only ways to recover it are FLR or D3cold entry, with the former only being supported on driver unload and the latter only on DGFX, for which we don't need to load the GSC. Therefore, if GSC fails to load there is no need to try again because the HW is stuck in the error state and the submission to load the FW would just hang the GSCCS. Note that, due to wa_14015076503, on MTL the GuC escalates all GSCCS hangs to full GT resets, which would trigger a new attempt to load the GSC FW in the post-reset HW re-init; this issue is also fixed by not attempting to load the GSC FW after an error. Fixes: 15bd4a67e914 ("drm/i915/gsc: GSC firmware loading") Signed-off-by: Daniele Ceraolo Spurio <[email protected]> Cc: Daniele Ceraolo Spurio <[email protected]> Cc: Alan Previn <[email protected]> Cc: John Harrison <[email protected]> Cc: Rodrigo Vivi <[email protected]> Cc: <[email protected]> # v6.3+ Reviewed-by: Jonathan Cavitt <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 03ded4d432a1fb7bb6c44c5856d14115f6f6c3b9) Signed-off-by: Joonas Lahtinen <[email protected]>
2024-09-02drm/imagination: Free pvr_vm_gpuva after unlinkMatt Coster1-0/+4
This caused a measurable memory leak. Although the individual allocations are small, the leaks occurs in a high-usage codepath (remapping or unmapping device memory) so they add up quickly. Fixes: ff5f643de0bf ("drm/imagination: Add GEM and VM related code") Cc: [email protected] Reviewed-by: Frank Binns <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Matt Coster <[email protected]>
2024-09-01Merge tag 'pwrseq-fixes-for-v6.11-rc6' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull power sequencing fix from Bartosz Golaszewski: "A follow-up fix for the power sequencing subsystem. It turned out the previous fix for this driver was incomplete and broke the WLAN support on some platforms. This addresses the issue. - set the direction of the wlan-enable GPIO to output after requesting it as-is" * tag 'pwrseq-fixes-for-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: power: sequencing: qcom-wcn: set the wlan-enable GPIO to output
2024-08-31power: sequencing: qcom-wcn: set the wlan-enable GPIO to outputBartosz Golaszewski1-0/+7
Commit a9aaf1ff88a8 ("power: sequencing: request the WLAN enable GPIO as-is") broke WLAN on boards on which the wlan-enable GPIO enabling the wifi module isn't in output mode by default. We need to set direction to output while retaining the value that was already set to keep the ath module on if it's already started. Fixes: a9aaf1ff88a8 ("power: sequencing: request the WLAN enable GPIO as-is") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bartosz Golaszewski <[email protected]>
2024-09-01Merge tag 'usb-6.11-rc6' of ↵Linus Torvalds12-14/+69
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 6.11-rc6. Included in here are: - dwc3 driver fixes for reported issues - MAINTAINER file update, marking a driver as unsupported :( - cdnsp driver fixes - USB gadget driver fix - USB sysfs fix - other tiny fixes - new device ids for usb serial driver All of these have been in linux-next this week with no reported issues" * tag 'usb-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: serial: option: add MeiG Smart SRM825L usb: cdnsp: fix for Link TRB with TC usb: dwc3: st: add missing depopulate in probe error path usb: dwc3: st: fix probed platform device ref count on probe error path usb: dwc3: ep0: Don't reset resource alloc flag (including ep0) usb: core: sysfs: Unmerge @usb3_hardware_lpm_attr_group in remove_power_attributes() usb: typec: fsa4480: Relax CHIP_ID check usb: dwc3: xilinx: add missing depopulate in probe error path usb: dwc3: omap: add missing depopulate in probe error path dt-bindings: usb: microchip,usb2514: Fix reference USB device schema usb: gadget: uvc: queue pump work in uvcg_video_enable() cdc-acm: Add DISABLE_ECHO quirk for GE HealthCare UI Controller usb: cdnsp: fix incorrect index in cdnsp_get_hw_deq function usb: dwc3: core: Prevent USB core invalid event buffer address access MAINTAINERS: Mark UVC gadget driver as orphan
2024-09-01Merge tag 'scsi-fixes' of ↵Linus Torvalds3-6/+10
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Minor fixes only. The sd.c one ignores a sync cache request if format is in progress which can happen if formatting a drive across suspend/resume" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sd: Ignore command SYNCHRONIZE CACHE error if format in progress scsi: aacraid: Fix double-free on probe failure scsi: lpfc: Fix overflow build issue
2024-09-01Merge tag 'arm-fixes-6.11-2' of ↵Linus Torvalds10-51/+110
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "There is a fairly large number of bug fixes for Qualcomm platforms, most of them addressing issues with the devicetree files for the newly added Snapdragon X1 based laptops to make them more reliable. The Qualcomm driver changes address a few build-time issues as well as runtime problems in the tzmem and scm firmware, the USB Type-C driver, and the cmd-db and pmic_glink soc drivers. The NXP i.MX usually gets a bunch of devicetree fixes that is proportional to the number of supported machines. This includes both warning fixes and correctness for the 64-bit i.MX9, i.MX8 and layerscape platforms, as well as a single fix for a 32-bit i.MX6 based board. The other changes are the usual minor changes, including an update to the MAINTAINERS file, an omap3 dts file and a SoC driver for mpfs (risc-v)" * tag 'arm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits) firmware: microchip: fix incorrect error report of programming:timeout on success soc: qcom: pd-mapper: Fix singleton refcount firmware: qcom: tzmem: disable sdm670 platform soc: qcom: pmic_glink: Actually communicate when remote goes down usb: typec: ucsi: Move unregister out of atomic section soc: qcom: pmic_glink: Fix race during initialization firmware: qcom: qseecom: remove unused functions firmware: qcom: tzmem: fix virtual-to-physical address conversion firmware: qcom: scm: Mark get_wq_ctx() as atomic call arm64: dts: qcom: x1e80100: Fix Adreno SMMU global interrupt arm64: dts: qcom: disable GPU on x1e80100 by default arm64: dts: imx8mm-phygate: fix typo pinctrcl-0 arm64: dts: imx95: correct L3Cache cache-sets arm64: dts: imx95: correct a55 power-domains arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design arm64: dts: imx93: update default value for snps,clk-csr arm64: dts: freescale: tqma9352: Fix watchdog reset arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962 ...
2024-08-31Merge tag 'input-for-v6.11-rc5' of ↵Linus Torvalds1-45/+13
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fix from Dmitry Torokhov: - a fix for Cypress PS/2 touchpad for regression introduced in 6.11 merge window where a timeout condition is incorrectly reported for all extended Cypress commands * tag 'input-for-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: cypress_ps2 - fix waiting for command response
2024-08-31Merge tag 'pci-v6.11-fixes-2' of ↵Linus Torvalds2-2/+18
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci fixes from Bjorn Helgaas: - Add Manivannan Sadhasivam as PCI native host bridge and endpoint driver reviewer (Manivannan Sadhasivam) - Disable MHI RAM data parity error interrupt for qcom SA8775P SoC to work around hardware erratum that causes a constant stream of interrupts (Manivannan Sadhasivam) - Don't try to fall back to qcom Operating Performance Points (OPP) support unless the platform actually supports OPP (Manivannan Sadhasivam) - Add [email protected] mailing list to MAINTAINERS for NXP layerscape and imx6 PCI controller drivers (Frank Li) * tag 'pci-v6.11-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: MAINTAINERS: PCI: Add NXP PCI controller mailing list [email protected] PCI: qcom: Use OPP only if the platform supports it PCI: qcom-ep: Disable MHI RAM data parity error interrupt for SA8775P SoC MAINTAINERS: Add Manivannan Sadhasivam as Reviewer for PCI native host bridge and endpoint drivers
2024-08-31nouveau: fix the fwsec sb verification register.Dave Airlie1-1/+1
This aligns with what open gpu does, the 0x15 hex is just to trick you. Fixes: 176fdcbddfd2 ("drm/nouveau/gsp/r535: add support for booting GSP-RM") Reviewed-by: Ben Skeggs <[email protected]> Signed-off-by: Dave Airlie <[email protected]> Signed-off-by: Danilo Krummrich <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-08-31Merge tag 'pm-6.11-rc6' of ↵Linus Torvalds2-7/+10
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix three issues in the amd-pstate cpufreq driver. Specifics: - Remove checks for highest performance match on preferred cores when updating preferred core ranking in amd-pstate (Mario Limonciello) - Make amd-pstate call topology_logical_package_id() instead of logical_die_id() to get a socked ID for a CPU (Gautham Shenoy) - Fix uninitialized variable in amd_pstate_cpu_boost_update() (Dan Carpenter)" * tag 'pm-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq/amd-pstate-ut: Don't check for highest perf matching on prefcore cpufreq/amd-pstate: Use topology_logical_package_id() instead of logical_die_id() cpufreq: amd-pstate: Fix uninitialized variable in amd_pstate_cpu_boost_update()
2024-08-31Merge tag 'dmaengine-fix-6.11' of ↵Linus Torvalds8-79/+166
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine fixes from Vinod Koul: - A bunch of dw driver changes to fix the src/dst addr width config - Omap driver fix for sglen initialization - stm32-dma3 driver lli_size init fix - dw edma driver fixes for watermark interrupts and unmasking STOP and ABORT interrupts * tag 'dmaengine-fix-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: dw-edma: Do not enable watermark interrupts for HDMA dmaengine: dw-edma: Fix unmasking STOP and ABORT interrupts for HDMA dmaengine: stm32-dma3: Set lli_size after allocation dmaengine: ti: omap-dma: Initialize sglen after allocation dmaengine: dw: Unify ret-val local variables naming dmaengine: dw: Simplify max-burst calculation procedure dmaengine: dw: Define encode_maxburst() above prepare_ctllo() callbacks dmaengine: dw: Simplify prepare CTL_LO methods dmaengine: dw: Add memory bus width verification dmaengine: dw: Add peripheral bus width verification
2024-08-31Merge tag 'phy-fixes-6.11' of ↵Linus Torvalds4-9/+74
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy fixes from Vinod Koul: - Qualcomm QMP X1E80100 PCIe Gen4 PHY initialisation fix - Freescale imx8mq tuning parameter name fix - Samsung exynos5 fir for error code in probe() - Xilinx Zynqmp SGMII linkup failure fix * tag 'phy-fixes-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: xilinx: phy-zynqmp: Fix SGMII linkup failure on resume phy: exynos5-usbdrd: fix error code in probe() phy: fsl-imx8mq-usb: fix tuning parameter name phy: qcom: qmp-pcie: Fix X1E80100 PCIe Gen4 PHY initialisation
2024-08-31Merge tag 'soundwire-6.11-fixes' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire fix from Vinod Koul: - Single fix for non-continous port map programming * tag 'soundwire-6.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: stream: fix programming slave ports for non-continous port maps
2024-08-31Merge tag 'iommu-fixes-v6.11-rc5' of ↵Linus Torvalds9-51/+106
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux Pull iommu fixes from Joerg Roedel: - Fix a device-stall problem in bad io-page-fault setups (faults received from devices with no supporting domain attached). - Context flush fix for Intel VT-d. - Do not allow non-read+non-write mapping through iommufd as most implementations can not handle that. - Fix a possible infinite-loop issue in map_pages() path. - Add Jean-Philippe as reviewer for SMMUv3 SVA support * tag 'iommu-fixes-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: MAINTAINERS: Add Jean-Philippe as SMMUv3 SVA reviewer iommu: Do not return 0 from map_pages if it doesn't do anything iommufd: Do not allow creating areas without READ or WRITE iommu/vt-d: Fix incorrect domain ID in context flush helper iommu: Handle iommu faults for a bad iopf setup
2024-08-30Merge tag 'usb-serial-6.11-rc6' of ↵Greg Kroah-Hartman1-0/+5
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial device id for 6.11-rc6 Here's a new modem device id. This one has been in linux-next with no reported issues. * tag 'usb-serial-6.11-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add MeiG Smart SRM825L
2024-08-30drm: komeda: Fix an issue related to normalized zposhongchi.peng1-3/+7
We use komeda_crtc_normalize_zpos to normalize zpos of affected planes to their blending zorder in CU. If there's only one slave plane in affected planes and its layer_split property is enabled, order++ for its split layer, so that when calculating the normalized_zpos of master planes, the split layer of the slave plane is included, but the max_slave_zorder does not include the split layer and keep zero because there's only one slave plane in affacted planes, although we actually use two slave layers in this commit. In most cases, this bug does not result in a commit failure, but assume the following situation: slave_layer 0: zpos = 0, layer split enabled, normalized_zpos = 0;(use slave_layer 2 as its split layer) master_layer 0: zpos = 2, layer_split enabled, normalized_zpos = 2;(use master_layer 2 as its split layer) master_layer 1: zpos = 4, normalized_zpos = 4; master_layer 3: zpos = 5, normalized_zpos = 5; kcrtc_st->max_slave_zorder = 0; When we use master_layer 3 as a input of CU in function komeda_compiz_set_input and check it with function komeda_component_check_input, the parameter idx is equal to normailzed_zpos minus max_slave_zorder, the value of idx is 5 and is euqal to CU's max_active_inputs, so that komeda_component_check_input returns a -EINVAL value. To fix the bug described above, when calculating the max_slave_zorder with the layer_split enabled, count the split layer in this calculation directly. Signed-off-by: hongchi.peng <[email protected]> Acked-by: Liviu Dudau <[email protected]> Signed-off-by: Liviu Dudau <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-08-30Merge tag 'drm-fixes-2024-08-30' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds32-116/+389
Pull drm fixes from Dave Airlie: "Another week, another set of GPU fixes. amdgpu and vmwgfx leading the charge, then i915 and xe changes along with v3d and some other bits. The TTM revert is due to some stuttering graphical apps probably due to longer stalls while prefaulting. Seems pretty much where I'd expect things, ttm: - revert prefault change, caused stutters aperture: - handle non-VGA devices bettter amdgpu: - SWSMU gaming stability fix - SMU 13.0.7 fix - SWSMU documentation alignment fix - SMU 14.0.x fixes - GC 12.x fix - Display fix - IP discovery fix - SMU 13.0.6 fix i915: - Fix #11195: The external display connect via USB type-C dock stays blank after re-connect the dock - Make DSI backlight work for 2G version of Lenovo Yoga Tab 3 X90F - Move ARL GuC firmware to correct version xe: - Invalidate media_gt TLBs - Fix HWMON i1 power setup write command vmwgfx: - prevent unmapping active read buffers - fix prime with external buffers - disable coherent dumb buffers without 3d v3d: - disable preemption while updating GPU stats" * tag 'drm-fixes-2024-08-30' of https://gitlab.freedesktop.org/drm/kernel: drm/xe/hwmon: Fix WRITE_I1 param from u32 to u16 drm/v3d: Disable preemption while updating GPU stats drm/amd/pm: Drop unsupported features on smu v14_0_2 drm/amd/pm: Add support for new P2S table revision drm/amdgpu: support for gc_info table v1.3 drm/amd/display: avoid using null object of framebuffer drm/amdgpu/gfx12: set UNORD_DISPATCH in compute MQDs drm/amd/pm: update message interface for smu v14.0.2/3 drm/amdgpu/swsmu: always force a state reprogram on init drm/amdgpu/smu13.0.7: print index for profiles drm/amdgpu: align pp_power_profile_mode with kernel docs drm/i915/dp_mst: Fix MST state after a sink reset drm/xe: Invalidate media_gt TLBs drm/i915: ARL requires a newer GSC firmware drm/i915/dsi: Make Lenovo Yoga Tab 3 X90F DMI match less strict video/aperture: optionally match the device in sysfb_disable() drm/vmwgfx: Disable coherent dumb buffers without 3d drm/vmwgfx: Fix prime with external buffers drm/vmwgfx: Prevent unmapping active read buffers Revert "drm/ttm: increase ttm pre-fault value to PMD size"
2024-08-30Merge tag 'drm-misc-fixes-2024-08-29' of ↵Dave Airlie10-31/+159
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes A revert for a previous TTM commit causing stuttering, 3 fixes for vmwgfx related to buffer operations, a fix for video/aperture with non-VGA primary devices, and a preemption status fix for v3d Signed-off-by: Dave Airlie <[email protected]> From: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20240829-efficient-swift-from-lemuria-f60c05@houat
2024-08-30Merge tag 'drm-xe-fixes-2024-08-29' of ↵Dave Airlie2-14/+25
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes - Invalidate media_gt TLBs (Brost) - Fix HWMON i1 power setup write command (Karthik) Signed-off-by: Dave Airlie <[email protected]> From: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-08-30Merge tag 'drm-intel-fixes-2024-08-29' of ↵Dave Airlie9-3/+104
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes - Fix #11195: The external display connect via USB type-C dock stays blank after re-connect the dock - Make DSI backlight work for 2G version of Lenovo Yoga Tab 3 X90F . Move ARL GuC firmware to correct version - Signed-off-by: Dave Airlie <[email protected]> From: Joonas Lahtinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-08-30Merge tag 'hwmon-for-v6.11-rc6' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - pt5161l: Fix invalid temperature reading of bad ADC values - asus-ec-sensors: Remove unsupported VRM temperature from X570-E GAMING * tag 'hwmon-for-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (pt5161l) Fix invalid temperature reading hwmon: (asus-ec-sensors) remove VRM temp X570-E GAMING
2024-08-30Merge tag 'net-6.11-rc6' of ↵Linus Torvalds22-130/+465
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bluetooth, wireless and netfilter. No known outstanding regressions. Current release - regressions: - wifi: iwlwifi: fix hibernation - eth: ionic: prevent tx_timeout due to frequent doorbell ringing Previous releases - regressions: - sched: fix sch_fq incorrect behavior for small weights - wifi: - iwlwifi: take the mutex before running link selection - wfx: repair open network AP mode - netfilter: restore IP sanity checks for netdev/egress - tcp: fix forever orphan socket caused by tcp_abort - mptcp: close subflow when receiving TCP+FIN - bluetooth: fix random crash seen while removing btnxpuart driver Previous releases - always broken: - mptcp: more fixes for the in-kernel PM - eth: bonding: change ipsec_lock from spin lock to mutex - eth: mana: fix race of mana_hwc_post_rx_wqe and new hwc response Misc: - documentation: drop special comment style for net code" * tag 'net-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits) nfc: pn533: Add poll mod list filling check mailmap: update entry for Sriram Yagnaraman selftests: mptcp: join: check re-re-adding ID 0 signal mptcp: pm: ADD_ADDR 0 is not a new address selftests: mptcp: join: validate event numbers mptcp: avoid duplicated SUB_CLOSED events selftests: mptcp: join: check re-re-adding ID 0 endp mptcp: pm: fix ID 0 endp usage after multiple re-creations mptcp: pm: do not remove already closed subflows selftests: mptcp: join: no extra msg if no counter selftests: mptcp: join: check re-adding init endp with != id mptcp: pm: reset MPC endp ID when re-added mptcp: pm: skip connecting to already established sf mptcp: pm: send ACK on an active subflow selftests: mptcp: join: check removing ID 0 endpoint mptcp: pm: fix RM_ADDR ID for the initial subflow mptcp: pm: reuse ID 0 after delete and re-add net: busy-poll: use ktime_get_ns() instead of local_clock() sctp: fix association labeling in the duplicate COOKIE-ECHO case mptcp: pr_debug: add missing \n at the end ...
2024-08-29Input: cypress_ps2 - fix waiting for command responseDmitry Torokhov1-45/+13
Commit 8bccf667f62a ("Input: cypress_ps2 - report timeouts when reading command status") uncovered an existing problem with cypress_ps2 driver: it tries waiting on a PS/2 device waitqueue without using the rest of libps2. Unfortunately without it nobody signals wakeup for the waiting process, and each "extended" command was timing out. But the rest of the code simply did not notice it. Fix this by switching from homegrown way of sending request to get command response and reading it to standard ps2_command() which does the right thing. Reported-by: Woody Suwalski <[email protected]> Tested-by: Woody Suwalski <[email protected]> Fixes: 8bccf667f62a ("Input: cypress_ps2 - report timeouts when reading command status") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2024-08-29drm/xe/hwmon: Fix WRITE_I1 param from u32 to u16Karthik Poosa1-1/+1
WRITE_I1 sub-command of the POWER_SETUP pcode command accepts a u16 parameter instead of u32. This change prevents potential illegal sub-command errors. v2: Mask uval instead of changing the prototype. (Badal) v3: Rephrase commit message. (Badal) Signed-off-by: Karthik Poosa <[email protected]> Fixes: 92d44a422d0d ("drm/xe/hwmon: Expose card reactive critical power") Reviewed-by: Badal Nilawar <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Rodrigo Vivi <[email protected]> (cherry picked from commit a7f657097e96d8fa745c74bb1a239ebd5a8c971c) Signed-off-by: Rodrigo Vivi <[email protected]>
2024-08-29nfc: pn533: Add poll mod list filling checkAleksandr Mishin1-0/+5
In case of im_protocols value is 1 and tm_protocols value is 0 this combination successfully passes the check 'if (!im_protocols && !tm_protocols)' in the nfc_start_poll(). But then after pn533_poll_create_mod_list() call in pn533_start_poll() poll mod list will remain empty and dev->poll_mod_count will remain 0 which lead to division by zero. Normally no im protocol has value 1 in the mask, so this combination is not expected by driver. But these protocol values actually come from userspace via Netlink interface (NFC_CMD_START_POLL operation). So a broken or malicious program may pass a message containing a "bad" combination of protocol parameter values so that dev->poll_mod_count is not incremented inside pn533_poll_create_mod_list(), thus leading to division by zero. Call trace looks like: nfc_genl_start_poll() nfc_start_poll() ->start_poll() pn533_start_poll() Add poll mod list filling check. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: dfccd0f58044 ("NFC: pn533: Add some polling entropy") Signed-off-by: Aleksandr Mishin <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-08-28Merge tag 'wireless-2024-08-28' of ↵Jakub Kicinski12-35/+157
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== Regressions: * wfx: fix for open network connection * iwlwifi: fix for hibernate (due to fast resume feature) * iwlwifi: fix for a few warnings that were recently added (had previously been messages not warnings) Previously broken: * mwifiex: fix static structures used for per-device data * iwlwifi: some harmless FW related messages were tagged too high priority * iwlwifi: scan buffers weren't checked correctly * mac80211: SKB leak on beacon error path * iwlwifi: fix ACPI table interop with certain BIOSes * iwlwifi: fix locking for link selection * mac80211: fix SSID comparison in beacon validation * tag 'wireless-2024-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: iwlwifi: clear trans->state earlier upon error wifi: wfx: repair open network AP mode wifi: mac80211: free skb on error path in ieee80211_beacon_get_ap() wifi: iwlwifi: mvm: don't wait for tx queues if firmware is dead wifi: iwlwifi: mvm: allow 6 GHz channels in MLO scan wifi: iwlwifi: mvm: pause TCM when the firmware is stopped wifi: iwlwifi: fw: fix wgds rev 3 exact size wifi: iwlwifi: mvm: take the mutex before running link selection wifi: iwlwifi: mvm: fix iwl_mvm_max_scan_ie_fw_cmd_room() wifi: iwlwifi: mvm: fix iwl_mvm_scan_fits() calculation wifi: iwlwifi: lower message level for FW buffer destination wifi: iwlwifi: mvm: fix hibernation wifi: mac80211: fix beacon SSID mismatch handling wifi: mwifiex: duplicate static structs used in driver instances ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-08-28Merge tag 'riscv-soc-fixes-for-v6.11-rc6' of ↵Arnd Bergmann1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes RISC-V soc fixes for v6.11-rc6 Prevent an erroneous unconditional report of a timeout during firmware upload in the mpfs-auto-update driver. Signed-off-by: Conor Dooley <[email protected]> * tag 'riscv-soc-fixes-for-v6.11-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: firmware: microchip: fix incorrect error report of programming:timeout on success Link: https://lore.kernel.org/r/20240828-fidelity-almighty-18d5434aaef0@spud Signed-off-by: Arnd Bergmann <[email protected]>
2024-08-28Merge tag 'qcom-drivers-fixes-for-6.11' of ↵Arnd Bergmann9-50/+109
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm driver fixes for v6.11 This corrects the tzmem virt-to-phys conversion, which caused issues for the uefisecapp implementation of EFI variable access. SDM670 is excluded from tzmem usage due to reported issues. The SCM get wait queue context call is corrected to be marked ATOMIC and some dead code in qseecom, following the tzmem conversion, is removed. The memory backing command DB is remapped writecombined, to avoid XPU violations when Linux runs without the Qualcomm hypervisor. Two compile fixes are added for pd-mapper, and the broken reference count is corrected, to make pd-mapper deal with remoteprocs going away. In pmic_glink a race condition where the client callbacks might be called before we returned the client handle is corrected. The broken conditions for when to signal that the firmware is going down is also corrected. In the pmic_glink UCSI driver, the ucsi_unregister() is moved out of the pdr callback, as this is being invoked in atomic context. Konrad's email address is updated in MAINTAINERS, and related mailmap entries are added. * tag 'qcom-drivers-fixes-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: pd-mapper: Fix singleton refcount firmware: qcom: tzmem: disable sdm670 platform soc: qcom: pmic_glink: Actually communicate when remote goes down usb: typec: ucsi: Move unregister out of atomic section soc: qcom: pmic_glink: Fix race during initialization firmware: qcom: qseecom: remove unused functions firmware: qcom: tzmem: fix virtual-to-physical address conversion firmware: qcom: scm: Mark get_wq_ctx() as atomic call MAINTAINERS: Update Konrad Dybcio's email address mailmap: Add an entry for Konrad Dybcio soc: qcom: pd-mapper: mark qcom_pdm_domains as __maybe_unused soc: qcom: cmd-db: Map shared memory as WC, not WB soc: qcom: pd-mapper: Depend on ARCH_QCOM || COMPILE_TEST Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-08-29Merge tag 'platform-drivers-x86-v6.11-5' of ↵Linus Torvalds4-2/+23
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform drivers fixes from Ilpo Järvinen: - platform/x86/amd/pmc: AMD 1Ah model 60h series support (2nd attempt) - asus-wmi: Prevent spurious rfkill on Asus Zenbook Duo - x86-android-tablets: Relax DMI match to cover another model * tag 'platform-drivers-x86-v6.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: x86-android-tablets: Make Lenovo Yoga Tab 3 X90F DMI match less strict platform/x86: asus-wmi: Fix spurious rfkill on UX8406MA platform/x86/amd/pmc: Extend support for PMC features on new AMD platform platform/x86/amd/pmc: Fix SMU command submission path on new AMD platform
Powered by cgit, Gruvboxed by Blaster4385.