aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-02-21octeontx2-af: cn10k: add workaround for ptp errataNaveen Mamindlapalli1-7/+80
This patch adds workaround for PTP errata given below. 1. At the time of 1 sec rollover of nano-second counter, the nano-second counter is set to 0. However, it should be set to (existing counter_value - 10^9). This leads to an accumulating error in the timestamp value with each sec rollover. 2. Additionally, the nano-second counter currently is rolling over at 'h3B9A_C9FF. It should roll over at 'h3B9A_CA00. The workaround for issue #1 is to speed up the ptp clock by adjusting PTP_CLOCK_COMP register to the desired value to compensate for the nanoseconds lost per each second. The workaround for issue #2 is to slow down the ptp clock such that the rollover occurs at ~1sec. Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Rakesh Babu Saladi <rsaladi2@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-21octeontx2-pf: cn10k: add support for new ptp timestamp formatNaveen Mamindlapalli6-3/+75
The cn10k hardware ptp timestamp format has been modified primarily to support 1-step ptp clock. The 64-bit timestamp used by hardware is split into two 32-bit fields, the upper one holds seconds, the lower one nanoseconds. A new register (PTP_CLOCK_SEC) has been added that returns the current seconds value. The nanoseconds register PTP_CLOCK_HI resets after every second. The cn10k RPM block provides Rx/Tx timestamps to the NIX block using the new timestamp format. The software can read the current timestamp in nanoseconds by reading both PTP_CLOCK_SEC & PTP_CLOCK_HI registers. This patch provides support for new timestamp format. Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Rakesh Babu Saladi <rsaladi2@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-21bonding: add new option ns_ip6_targetHangbin Liu2-0/+131
This patch add a new bonding option ns_ip6_target, which correspond to the arp_ip_target. With this we set IPv6 targets and send IPv6 NS request to determine the health of the link. For other related options like the validation, we still use arp_validate, and will change to ns_validate later. Note: the sysfs configuration support was removed based on https://lore.kernel.org/netdev/8863.1645071997@famine Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-21bonding: add new parameter ns_targetsHangbin Liu2-20/+219
Add a new bonding parameter ns_targets to store IPv6 address. Add required bond_ns_send/rcv functions first before adding IPv6 address option setting. Add two functions bond_send/rcv_validate so we can send/recv ARP and NS at the same time. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-21Bonding: split bond_handle_vlan from bond_arp_sendHangbin Liu1-24/+34
Function bond_handle_vlan() is split from bond_arp_send() for later IPv6 usage. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-21ravb: Use GFP_KERNEL instead of GFP_ATOMIC when possibleChristophe JAILLET1-1/+1
'max_rx_len' can be up to GBETH_RX_BUFF_MAX (i.e. 8192) (see 'gbeth_hw_info'). The default value of 'num_rx_ring' can be BE_RX_RING_SIZE (i.e. 1024). So this loop can allocate 8 Mo of memory. Previous memory allocations in this function already use GFP_KERNEL, so use __netdev_alloc_skb() and an explicit GFP_KERNEL instead of a implicit GFP_ATOMIC. This gives more opportunities of successful allocation. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-21net: qualcomm: rmnet: Use skb_put_zero() to simplify codeChristophe JAILLET1-3/+1
Use skb_put_zero() instead of hand-writing it. This saves a few lines of code and is more readable. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-19net: prestera: acl: fix 'client_map' buff overflowVolodymyr Mytnyk1-1/+1
smatch warnings: drivers/net/ethernet/marvell/prestera/prestera_acl.c:103 prestera_acl_chain_to_client() error: buffer overflow 'client_map' 3 <= 3 prestera_acl_chain_to_client(u32 chain_index, ...) ... u32 client_map[] = { PRESTERA_HW_COUNTER_CLIENT_LOOKUP_0, PRESTERA_HW_COUNTER_CLIENT_LOOKUP_1, PRESTERA_HW_COUNTER_CLIENT_LOOKUP_2 }; if (chain_index > ARRAY_SIZE(client_map)) ... Fixes: fa5d824ce5dd ("net: prestera: acl: add multi-chain support offload") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-19net: dsa: microchip: add ksz8563 to ksz9477 I2C driverAhmad Fatoum1-0/+1
The KSZ9477 SPI driver already has support for the KSZ8563. The same switch chip can also be managed via i2c and we have an KSZ9477 I2C driver, but that one lacks the relevant compatible entry. Add it. DT bindings already describe this compatible. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-19net: dsa: microchip: ksz9477: export HW stats over stats64 interfaceOleksij Rempel3-0/+104
Provide access to HW offloaded packets over stats64 interface. The rx/tx_bytes values needed some fixing since HW is accounting size of the Ethernet frame together with FCS. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-19net: phylink: remove phylink_config's pcs_pollRussell King (Oracle)1-2/+1
phylink_config's pcs_poll is no longer used, let's get rid of it. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-19atm: nicstar: Use kcalloc() to simplify codeChristophe JAILLET1-8/+2
Use kcalloc() instead of kmalloc_array() and a loop to set all the values of the array to NULL. While at it, remove a duplicated assignment to 'scq->num_entries'. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-19dpaa2-eth: Update SINGLE_STEP register accessRadu Bulie2-10/+93
DPAA2 MAC supports 1588 one step timestamping. If this option is enabled then for each transmitted PTP event packet, the 1588 SINGLE_STEP register is accessed to modify the following fields: -offset of the correction field inside the PTP packet -UDP checksum update bit, in case the PTP event packet has UDP encapsulation These values can change any time, because there may be multiple PTP clients connected, that receive various 1588 frame types: - L2 only frame - UDP / Ipv4 - UDP / Ipv6 - other The current implementation uses dpni_set_single_step_cfg to update the SINLGE_STEP register. Using an MC command on the Tx datapath for each transmitted 1588 message introduces high delays, leading to low throughput and consequently to a small number of supported PTP clients. Besides these, the nanosecond correction field from the PTP packet will contain the high delay from the driver which together with the originTimestamp will render timestamp values that are unacceptable in a GM clock implementation. This patch updates the Tx datapath for 1588 messages when single step timestamp is enabled and provides direct access to SINGLE_STEP register, eliminating the overhead caused by the dpni_set_single_step_cfg MC command. MC version >= 10.32 implements this functionality. If the MC version does not have support for returning the single step register base address, the driver will use dpni_set_single_step_cfg command for updates operations. All the delay introduced by dpni_set_single_step_cfg function will be eliminated (if MC version has support for returning the base address of the single step register), improving the egress driver performance for PTP packets when single step timestamping is enabled. Before these changes the maximum throughput for 1588 messages with single step hardware timestamp enabled was around 2000pps. After the updates the throughput increased up to 32.82 Mbps / 46631.02 pps. Signed-off-by: Radu Bulie <radu-andrei.bulie@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-19dpaa2-eth: Update dpni_get_single_step_cfg commandRadu Bulie3-1/+13
dpni_get_single_step_cfg is an MC firmware command used for retrieving the contents of SINGLE_STEP 1588 register available in a DPMAC. This patch adds a new version of this command that returns as an extra argument the physical base address of the aforementioned register. The address will be used to directly modify the contents of the SINGLE_STEP register instead of invoking the MC command dpni_set_single_step_cgf. The former approach introduced huge delays on the TX datapath when one step PTP events were transmitted. This led to low throughput and high latencies observed in the PTP correction field. Signed-off-by: Radu Bulie <radu-andrei.bulie@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-19net: prestera: flower: fix destroy tmpl in chainVolodymyr Mytnyk1-9/+19
Fix flower destroy template callback to release template only for specific tc chain instead of all chain tempaltes. The issue was intruduced by previous commit that introduced multi-chain support. Fixes: fa5d824ce5dd ("net: prestera: acl: add multi-chain support offload") Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-19mctp i2c: MCTP I2C binding driverMatt Johnston3-0/+1094
Provides MCTP network transport over an I2C bus, as specified in DMTF DSP0237. All messages between nodes are sent as SMBus Block Writes. Each I2C bus to be used for MCTP is flagged in devicetree by a 'mctp-controller' property on the bus node. Each flagged bus gets a mctpi2cX net device created based on the bus number. A 'mctp-i2c-controller' I2C client needs to be added under the adapter. In an I2C mux situation the mctp-i2c-controller node must be attached only to the root I2C bus. The I2C client will handle incoming I2C slave block write data for subordinate busses as well as its own bus. In configurations without devicetree a driver instance can be attached to a bus using the I2C slave new_device mechanism. The MCTP core will hold/release the MCTP I2C device while responses are pending (a 6 second timeout or once a socket is closed, response received etc). While held the MCTP I2C driver will lock the I2C bus so that the correct I2C mux remains selected while responses are received. (Ideally we would just lock the mux to keep the current bus selected for the response rather than a full I2C bus lock, but that isn't exposed in the I2C mux API) Signed-off-by: Matt Johnston <matt@codeconstruct.com.au> Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Wolfram Sang <wsa@kernel.org> # I2C transport parts Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-19i40e: remove dead stores on XSK hotpathAlexander Lobakin1-2/+1
The 'if (ntu == rx_ring->count)' block in i40e_alloc_rx_buffers_zc() was previously residing in the loop, but after introducing the batched interface it is used only to wrap-around the NTU descriptor, thus no more need to assign 'xdp'. 'cleaned_count' in i40e_clean_rx_irq_zc() was previously being incremented in the loop, but after commit f12738b6ec06 ("i40e: remove unnecessary cleaned_count updates") it gets assigned only once after it, so the initialization can be dropped. Fixes: 6aab0bb0c5cd ("i40e: Use the xsk batched rx allocation interface") Fixes: f12738b6ec06 ("i40e: remove unnecessary cleaned_count updates") Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-18ionic: clean up comments and whitespaceShannon Nelson3-5/+3
Fix up some checkpatch complaints that have crept in: doubled words words, mispellled words, doubled lines. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-18ionic: prefer strscpy over strlcpyShannon Nelson2-4/+4
Replace strlcpy with strscpy to clean up a checkpatch complaint. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-18ionic: Use vzalloc for large per-queue related buffersBrett Creeley1-8/+6
Use vzalloc for per-queue info structs that don't need any DMA mapping to help relieve memory pressure found when used in our limited SOC environment. Signed-off-by: Brett Creeley <brett@pensando.io> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-18ionic: catch transition back to RUNNING with fw_generation 0Shannon Nelson1-2/+2
In some graceful updates that get initially triggered by the RESET event, especially with older firmware, the fw_generation bits don't change but the fw_status is seen to go to 0 then back to 1. However, the driver didn't perform the restart, remained waiting for fw_generation to change, and got left in limbo. This is because the clearing of idev->fw_status_ready to 0 didn't happen correctly as it was buried in the transition trigger: since the transition down was triggered not here but in the RESET event handler, the clear to 0 didn't happen, so the transition back to 1 wasn't detected. Fix this particular case by bringing the setting of idev->fw_status_ready back out to where it was before. Fixes: 398d1e37f960 ("ionic: add FW_STOPPING state") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-18net/ibmvnic: Cleanup workaround doing an EOI after partition migrationCédric Le Goater1-9/+26
There were a fair amount of changes to workaround a firmware bug leaving a pending interrupt after migration of the ibmvnic device : commit 2df5c60e198c ("net/ibmvnic: Ignore H_FUNCTION return from H_EOI to tolerate XIVE mode") commit 284f87d2f387 ("Revert "net/ibmvnic: Fix EOI when running in XIVE mode"") commit 11d49ce9f794 ("net/ibmvnic: Fix EOI when running in XIVE mode.") commit f23e0643cd0b ("ibmvnic: Clear pending interrupt after device reset") Here is the final one taking into account the XIVE interrupt mode. Cc: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Cc: Dany Madden <drt@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-18teaming: deliver link-local packets with the link they arrive onjeffreyji1-0/+5
skb is ignored if team port is disabled. We want the skb to be delivered if it's an link layer packet. Issue is already fixed for bonding in commit b89f04c61efe ("bonding: deliver link-local packets with skb->dev set to link that packets arrived on") changelog: v2: change LLDP -> link layer in comments/commit descrip, comment format Signed-off-by: jeffreyji <jeffreyji@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-18net: dsa: qca8k: mark as non-legacyRussell King (Oracle)1-0/+2
The qca8k driver does not make use of the speed, duplex, pause or advertisement in its phylink_mac_config() implementation, so it can be marked as a non-legacy driver. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-18net: dsa: qca8k: move pcs configurationRussell King (Oracle)1-66/+84
Move the PCS configuration to qca8k_pcs_config(). Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-18net: dsa: qca8k: convert to use phylink_pcsRussell King (Oracle)2-12/+81
Convert the qca8k driver to use the phylink_pcs support to talk to the SGMII PCS. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-18net: dsa: qca8k: move qca8k_phylink_mac_link_state()Russell King (Oracle)1-42/+42
Move qca8k_phylink_mac_link_state() to separate the code movement from code changes. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-18net: dsa: qca8k: move qca8k_setup()Russell King (Oracle)1-214/+214
Move qca8k_setup() to be later in the file to avoid needing prototypes for called functions. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-18net: ethernet: xilinx: cleanup commentsTom Rix5-6/+6
Remove the second 'the'. Replacements: endiannes to endianness areconnected to are connected Mamagement to Management undoccumented to undocumented Xilink to Xilinx strucutre to structure Change kernel-doc comment style to c style for /* Management ... Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17s390/qeth: Remove redundant 'flush_workqueue()' callsXu Wang1-1/+0
'destroy_workqueue()' already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant 'flush_workqueue()' calls. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Acked-by: Alexandra Winter <wintera@linux.ibm.com> Link: https://lore.kernel.org/r/20220216075155.940-1-vulab@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-17net: ll_temac: Use GFP_KERNEL instead of GFP_ATOMIC when possibleChristophe JAILLET1-2/+3
XTE_MAX_JUMBO_FRAME_SIZE is over 9000 bytes and the default value for 'rx_bd_num' is RX_BD_NUM_DEFAULT (i.e. 1024) So this loop allocates more than 9 Mo of memory. Previous memory allocations in this function already use GFP_KERNEL, so use __netdev_alloc_skb_ip_align() and an explicit GFP_KERNEL instead of a implicit GFP_ATOMIC. This gives more opportunities of successful allocation. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/694abd65418b2b3974106a82d758e3474c65ae8f.1645042560.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-17net: nixge: Use GFP_KERNEL instead of GFP_ATOMIC when possibleChristophe JAILLET1-2/+3
NIXGE_MAX_JUMBO_FRAME_SIZE is over 9000 bytes and RX_BD_NUM 128. So this loop allocates more than 1 Mo of memory. Previous memory allocations in this function already use GFP_KERNEL, so use __netdev_alloc_skb_ip_align() and an explicit GFP_KERNEL instead of a implicit GFP_ATOMIC. This gives more opportunities of successful allocation. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/28d2c8e05951ad02a57eb48333672947c8bb4f81.1645043881.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-17net: marvell: prestera: handle fib notificationsYevhen Orlov3-0/+427
For now we support only TRAP or DROP, so we can offload only "local" or "blackhole" routes. Nexthop routes is TRAP for now. Will be implemented soon. Co-developed-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17net: marvell: prestera: add hardware router objects accounting for lpmYevhen Orlov3-7/+170
Add new router_hw object "fib_node". For now it support only DROP and TRAP mode. Co-developed-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17net: marvell: prestera: Add router LPM ABIYevhen Orlov2-0/+55
Add functions to create/delete lpm entry in hw. prestera_hw_lpm_add() take index of allocated virtual router. Also it takes grp_id, which is index of allocated nexthop group. ABI to create nexthop group will be added soon. Co-developed-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski155-1122/+1160
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-17Merge tag 'net-5.17-rc5' of ↵Linus Torvalds42-644/+210
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wireless and netfilter. Current release - regressions: - dsa: lantiq_gswip: fix use after free in gswip_remove() - smc: avoid overwriting the copies of clcsock callback functions Current release - new code bugs: - iwlwifi: - fix use-after-free when no FW is present - mei: fix the pskb_may_pull check in ipv4 - mei: retry mapping the shared area - mvm: don't feed the hardware RFKILL into iwlmei Previous releases - regressions: - ipv6: mcast: use rcu-safe version of ipv6_get_lladdr() - tipc: fix wrong publisher node address in link publications - iwlwifi: mvm: don't send SAR GEO command for 3160 devices, avoid FW assertion - bgmac: make idm and nicpm resource optional again - atl1c: fix tx timeout after link flap Previous releases - always broken: - vsock: remove vsock from connected table when connect is interrupted by a signal - ping: change destination interface checks to match raw sockets - crypto: af_alg - get rid of alg_memory_allocated to avoid confusing semantics (and null-deref) after SO_RESERVE_MEM was added - ipv6: make exclusive flowlabel checks per-netns - bonding: force carrier update when releasing slave - sched: limit TC_ACT_REPEAT loops - bridge: multicast: notify switchdev driver whenever MC processing gets disabled because of max entries reached - wifi: brcmfmac: fix crash in brcm_alt_fw_path when WLAN not found - iwlwifi: fix locking when "HW not ready" - phy: mediatek: remove PHY mode check on MT7531 - dsa: mv88e6xxx: flush switchdev FDB workqueue before removing VLAN - dsa: lan9303: - fix polarity of reset during probe - fix accelerated VLAN handling" * tag 'net-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits) bonding: force carrier update when releasing slave nfp: flower: netdev offload check for ip6gretap ipv6: fix data-race in fib6_info_hw_flags_set / fib6_purge_rt ipv4: fix data races in fib_alias_hw_flags_set net: dsa: lan9303: add VLAN IDs to master device net: dsa: lan9303: handle hwaccel VLAN tags vsock: remove vsock from connected table when connect is interrupted by a signal Revert "net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname" ping: fix the dif and sdif check in ping_lookup net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990 net: sched: limit TC_ACT_REPEAT loops tipc: fix wrong notification node addresses net: dsa: lantiq_gswip: fix use after free in gswip_remove() ipv6: per-netns exclusive flowlabel checks net: bridge: multicast: notify switchdev driver whenever MC processing gets disabled CDC-NCM: avoid overflow in sanity checking mctp: fix use after free net: mscc: ocelot: fix use-after-free in ocelot_vlan_del() bonding: fix data-races around agg_select_timer dpaa2-eth: Initialize mutex used in one step timestamping path ...
2022-02-17bonding: force carrier update when releasing slaveZhang Changzhong1-3/+2
In __bond_release_one(), bond_set_carrier() is only called when bond device has no slave. Therefore, if we remove the up slave from a master with two slaves and keep the down slave, the master will remain up. Fix this by moving bond_set_carrier() out of if (!bond_has_slaves(bond)) statement. Reproducer: $ insmod bonding.ko mode=0 miimon=100 max_bonds=2 $ ifconfig bond0 up $ ifenslave bond0 eth0 eth1 $ ifconfig eth0 down $ ifenslave -d bond0 eth1 $ cat /proc/net/bonding/bond0 Fixes: ff59c4563a8d ("[PATCH] bonding: support carrier state for master") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/1645021088-38370-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-17nfp: flower: netdev offload check for ip6gretapDanie du Toit1-0/+2
IPv6 GRE tunnels are not being offloaded, this is caused by a missing netdev offload check. The functionality of IPv6 GRE tunnel offloading was previously added but this check was not included. Adding the ip6gretap check allows IPv6 GRE tunnels to be offloaded correctly. Fixes: f7536ffb0986 ("nfp: flower: Allow ipv6gretap interface for offloading") Signed-off-by: Danie du Toit <danie.dutoit@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220217124820.40436-1-louis.peens@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-17ipv6: fix data-race in fib6_info_hw_flags_set / fib6_purge_rtEric Dumazet1-2/+2
Because fib6_info_hw_flags_set() is called without any synchronization, all accesses to gi6->offload, fi->trap and fi->offload_failed need some basic protection like READ_ONCE()/WRITE_ONCE(). BUG: KCSAN: data-race in fib6_info_hw_flags_set / fib6_purge_rt read to 0xffff8881087d5886 of 1 bytes by task 13953 on cpu 0: fib6_drop_pcpu_from net/ipv6/ip6_fib.c:1007 [inline] fib6_purge_rt+0x4f/0x580 net/ipv6/ip6_fib.c:1033 fib6_del_route net/ipv6/ip6_fib.c:1983 [inline] fib6_del+0x696/0x890 net/ipv6/ip6_fib.c:2028 __ip6_del_rt net/ipv6/route.c:3876 [inline] ip6_del_rt+0x83/0x140 net/ipv6/route.c:3891 __ipv6_dev_ac_dec+0x2b5/0x370 net/ipv6/anycast.c:374 ipv6_dev_ac_dec net/ipv6/anycast.c:387 [inline] __ipv6_sock_ac_close+0x141/0x200 net/ipv6/anycast.c:207 ipv6_sock_ac_close+0x79/0x90 net/ipv6/anycast.c:220 inet6_release+0x32/0x50 net/ipv6/af_inet6.c:476 __sock_release net/socket.c:650 [inline] sock_close+0x6c/0x150 net/socket.c:1318 __fput+0x295/0x520 fs/file_table.c:280 ____fput+0x11/0x20 fs/file_table.c:313 task_work_run+0x8e/0x110 kernel/task_work.c:164 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop kernel/entry/common.c:175 [inline] exit_to_user_mode_prepare+0x160/0x190 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:300 do_syscall_64+0x50/0xd0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae write to 0xffff8881087d5886 of 1 bytes by task 1912 on cpu 1: fib6_info_hw_flags_set+0x155/0x3b0 net/ipv6/route.c:6230 nsim_fib6_rt_hw_flags_set drivers/net/netdevsim/fib.c:668 [inline] nsim_fib6_rt_add drivers/net/netdevsim/fib.c:691 [inline] nsim_fib6_rt_insert drivers/net/netdevsim/fib.c:756 [inline] nsim_fib6_event drivers/net/netdevsim/fib.c:853 [inline] nsim_fib_event drivers/net/netdevsim/fib.c:886 [inline] nsim_fib_event_work+0x284f/0x2cf0 drivers/net/netdevsim/fib.c:1477 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x2c7/0x2e0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 value changed: 0x22 -> 0x2a Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 1912 Comm: kworker/1:3 Not tainted 5.16.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events nsim_fib_event_work Fixes: 0c5fcf9e249e ("IPv6: Add "offload failed" indication to routes") Fixes: bb3c4ab93e44 ("ipv6: Add "offload" and "trap" indications to routes") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Amit Cohen <amcohen@nvidia.com> Cc: Ido Schimmel <idosch@nvidia.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20220216173217.3792411-2-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-17net: dsa: lan9303: add VLAN IDs to master deviceMans Rullgard2-2/+10
If the master device does VLAN filtering, the IDs used by the switch must be added for any frames to be received. Do this in the port_enable() function, and remove them in port_disable(). Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303") Signed-off-by: Mans Rullgard <mans@mansr.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220216204818.28746-1-mans@mansr.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-17Revert "net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname"Jonas Gorski1-7/+16
This reverts commit 3710e80952cf2dc48257ac9f145b117b5f74e0a5. Since idm_base and nicpm_base are still optional resources not present on all platforms, this breaks the driver for everything except Northstar 2 (which has both). The same change was already reverted once with 755f5738ff98 ("net: broadcom: fix a mistake about ioremap resource"). So let's do it again. Fixes: 3710e80952cf ("net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> [florian: Added comments to explain the resources are optional] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220216184634.2032460-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-17net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990Daniele Palmas1-0/+5
Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit FN990 0x1071 composition in order to avoid bind error. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17net: ti: cpsw: remove guards against !BRIDGE_VLAN_INFO_BRENTRYVladimir Oltean1-4/+0
Since commit 3116ad0696dd ("net: bridge: vlan: don't notify to switchdev master VLANs without BRENTRY flag"), the bridge no longer emits switchdev notifiers for VLANs that don't have the BRIDGE_VLAN_INFO_BRENTRY flag, so these checks are dead code. Remove them. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17net: ti: am65-cpsw-nuss: remove guards against !BRIDGE_VLAN_INFO_BRENTRYVladimir Oltean1-4/+0
Since commit 3116ad0696dd ("net: bridge: vlan: don't notify to switchdev master VLANs without BRENTRY flag"), the bridge no longer emits switchdev notifiers for VLANs that don't have the BRIDGE_VLAN_INFO_BRENTRY flag, so these checks are dead code. Remove them. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17net: sparx5: remove guards against !BRIDGE_VLAN_INFO_BRENTRYVladimir Oltean1-6/+4
Since commit 3116ad0696dd ("net: bridge: vlan: don't notify to switchdev master VLANs without BRENTRY flag"), the bridge no longer emits switchdev notifiers for VLANs that don't have the BRIDGE_VLAN_INFO_BRENTRY flag, so these checks are dead code. Remove them. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17net: lan966x: remove guards against !BRIDGE_VLAN_INFO_BRENTRYVladimir Oltean1-12/+0
Since commit 3116ad0696dd ("net: bridge: vlan: don't notify to switchdev master VLANs without BRENTRY flag"), the bridge no longer emits switchdev notifiers for VLANs that don't have the BRIDGE_VLAN_INFO_BRENTRY flag, so these checks are dead code. Remove them. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17mlxsw: spectrum: remove guards against !BRIDGE_VLAN_INFO_BRENTRYVladimir Oltean2-5/+2
Since commit 3116ad0696dd ("net: bridge: vlan: don't notify to switchdev master VLANs without BRENTRY flag"), the bridge no longer emits switchdev notifiers for VLANs that don't have the BRIDGE_VLAN_INFO_BRENTRY flag, so these checks are dead code. Remove them. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17net: dsa: felix: update destinations of existing traps with ocelot-8021qVladimir Oltean1-111/+76
Historically, the felix DSA driver has installed special traps such that PTP over L2 works with the ocelot-8021q tagging protocol; commit 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") has the details. Then the ocelot switch library also gained more comprehensive support for PTP traps through commit 96ca08c05838 ("net: mscc: ocelot: set up traps for PTP packets"). Right now, PTP over L2 works using ocelot-8021q via the traps it has set for itself, but nothing else does. Consolidating the two code blocks would make ocelot-8021q gain support for PTP over L4 and tc-flower traps, and at the same time avoid some code and TCAM duplication. The traps are similar in intent, but different in execution, so some explanation is required. The traps set up by felix_setup_mmio_filtering() are VCAP IS1 filters, which have a PAG that chains them to a VCAP IS2 filter, and the IS2 is where the 'trap' action resides. The traps set up by ocelot_trap_add(), on the other hand, have a single filter, in VCAP IS2. The reason for chaining VCAP IS1 and IS2 in Felix was to ensure that the hardcoded traps take precedence and cannot be overridden by the Ocelot switch library. So in principle, the PTP traps needed for ocelot-8021q in the Felix driver can rely on ocelot_trap_add(), but the filters need to be patched to account for a quirk that LS1028A has: the quirk_no_xtr_irq described in commit 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping"). Live-patching is done by iterating through the trap list every time we know it has been updated, and transforming a trap into a redirect + CPU copy if ocelot-8021q is in use. Making the DSA ocelot-8021q tagger work with the Ocelot traps means we can eliminate the dedicated OCELOT_VCAP_IS1_TAG_8021Q_PTP_MMIO and OCELOT_VCAP_IS2_TAG_8021Q_PTP_MMIO cookies. To minimize the patch delta, OCELOT_VCAP_IS2_MRP_TRAP takes the place of OCELOT_VCAP_IS2_TAG_8021Q_PTP_MMIO (the alternative would have been to left-shift all cookie numbers by 1). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17net: dsa: felix: remove dead code in felix_setup_mmio_filtering()Vladimir Oltean1-5/+3
There has been some controversy related to the sanity check that a CPU port exists, and commit e8b1d7698038 ("net: dsa: felix: Fix memory leak in felix_setup_mmio_filtering") even "corrected" an apparent memory leak as static analysis tools see it. However, the check is completely dead code, since the earliest point at which felix_setup_mmio_filtering() can be called is: felix_pci_probe -> dsa_register_switch -> dsa_switch_probe -> dsa_tree_setup -> dsa_tree_setup_cpu_ports -> dsa_tree_setup_default_cpu -> contains the "DSA: tree %d has no CPU port\n" check -> dsa_tree_setup_master -> dsa_master_setup -> sysfs_create_group(&dev->dev.kobj, &dsa_group); -> makes tagging_store() callable -> dsa_tree_change_tag_proto -> dsa_tree_notify -> dsa_switch_event -> dsa_switch_change_tag_proto -> ds->ops->change_tag_protocol -> felix_change_tag_protocol -> felix_set_tag_protocol -> felix_setup_tag_8021q -> felix_setup_mmio_filtering -> breaks at first CPU port So probing would have failed earlier if there wasn't any CPU port defined. To avoid all confusion, delete the dead code and replace it with a comment. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Powered by cgit, Gruvboxed by Blaster4385.