aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2020-09-07spi: stm32: Rate-limit the 'Communication suspended' messageMarek Vasut1-1/+5
The 'spi_stm32 44004000.spi: Communication suspended' message means that when using PIO, the kernel did not read the FIFO fast enough and so the SPI controller paused the transfer. Currently, this is printed on every single such event, so if the kernel is busy and the controller is pausing the transfers often, the kernel will be all the more busy scrolling this message into the log buffer every few milliseconds. That is not helpful. Instead, rate-limit the message and print it every once in a while. It is not possible to use the default dev_warn_ratelimited(), because that is still too verbose, as it prints 10 lines (DEFAULT_RATELIMIT_BURST) every 5 seconds (DEFAULT_RATELIMIT_INTERVAL). The policy here is to print 1 line every 50 seconds (DEFAULT_RATELIMIT_INTERVAL * 10), because 1 line is more than enough and the cycles saved on printing are better left to the CPU to handle the SPI. However, dev_warn_once() is also not useful, as the user should be aware that this condition is possibly recurring or ongoing. Thus the custom rate-limit policy. Finally, turn the message from dev_warn() to dev_dbg(), since the system does not suffer any sort of malfunction if this message appears, it is just slowing down. This further reduces the printing into the log buffer and frees the CPU to do useful work. Fixes: dcbe0d84dfa5 ("spi: add driver for STM32 SPI controller") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Amelie Delaunay <amelie.delaunay@st.com> Cc: Antonio Borneo <borneo.antonio@gmail.com> Cc: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20200905151913.117775-1-marex@denx.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-07rbd: require global CAP_SYS_ADMIN for mapping and unmappingIlya Dryomov1-0/+12
It turns out that currently we rely only on sysfs attribute permissions: $ ll /sys/bus/rbd/{add*,remove*} --w------- 1 root root 4096 Sep 3 20:37 /sys/bus/rbd/add --w------- 1 root root 4096 Sep 3 20:37 /sys/bus/rbd/add_single_major --w------- 1 root root 4096 Sep 3 20:37 /sys/bus/rbd/remove --w------- 1 root root 4096 Sep 3 20:38 /sys/bus/rbd/remove_single_major This means that images can be mapped and unmapped (i.e. block devices can be created and deleted) by a UID 0 process even after it drops all privileges or by any process with CAP_DAC_OVERRIDE in its user namespace as long as UID 0 is mapped into that user namespace. Be consistent with other virtual block devices (loop, nbd, dm, md, etc) and require CAP_SYS_ADMIN in the initial user namespace for mapping and unmapping, and also for dumping the configuration string and refreshing the image header. Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2020-09-07mmc: sdio: Use mmc_pre_req() / mmc_post_req()Adrian Hunter1-17/+22
SDHCI changed from using a tasklet to finish requests, to using an IRQ thread i.e. commit c07a48c2651965 ("mmc: sdhci: Remove finish_tasklet"). Because this increased the latency to complete requests, a preparatory change was made to complete the request from the IRQ handler if possible i.e. commit 19d2f695f4e827 ("mmc: sdhci: Call mmc_request_done() from IRQ handler if possible"). That alleviated the situation for MMC block devices because the MMC block driver makes use of mmc_pre_req() and mmc_post_req() so that successful requests are completed in the IRQ handler and any DMA unmapping is handled separately in mmc_post_req(). However SDIO was still affected, and an example has been reported with up to 20% degradation in performance. Looking at SDIO I/O helper functions, sdio_io_rw_ext_helper() appeared to be a possible candidate for making use of asynchronous requests within its I/O loops, but analysis revealed that these loops almost never iterate more than once, so the complexity of the change would not be warrented. Instead, mmc_pre_req() and mmc_post_req() are added before and after I/O submission (mmc_wait_for_req) in mmc_io_rw_extended(). This still has the potential benefit of reducing the duration of interrupt handlers, as well as addressing the latency issue for SDHCI. It also seems a more reasonable solution than forcing drivers to do everything in the IRQ handler. Reported-by: Dmitry Osipenko <digetx@gmail.com> Fixes: c07a48c2651965 ("mmc: sdhci: Remove finish_tasklet") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200903082007.18715-1-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: sdhci-of-esdhc: Don't walk device-tree on every interruptChris Packham1-3/+7
Commit b214fe592ab7 ("mmc: sdhci-of-esdhc: add erratum eSDHC7 support") added code to check for a specific compatible string in the device-tree on every esdhc interrupat. Instead of doing this record the quirk in struct sdhci_esdhc and lookup the struct in esdhc_irq. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20200903012029.25673-1-chris.packham@alliedtelesis.co.nz Fixes: b214fe592ab7 ("mmc: sdhci-of-esdhc: add erratum eSDHC7 support") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: mmc_spi: Allow the driver to be built when CONFIG_HAS_DMA is unsetUlf Hansson2-35/+53
The commit cd57d07b1e4e ("sh: don't allow non-coherent DMA for NOMMU") made CONFIG_NO_DMA to be set for some platforms, for good reasons. Consequentially, CONFIG_HAS_DMA doesn't get set, which makes the DMA mapping interface to be built as stub functions, but also prevent the mmc_spi driver from being built as it depends on CONFIG_HAS_DMA. It turns out that for some odd cases, the driver still relied on the DMA mapping interface, even if the DMA was not actively being used. To fixup the behaviour, let's drop the build dependency for CONFIG_HAS_DMA. Moreover, as to allow the driver to succeed probing, let's move the DMA initializations behind "#ifdef CONFIG_HAS_DMA". Fixes: cd57d07b1e4e ("sh: don't allow non-coherent DMA for NOMMU") Reported-by: Rich Felker <dalias@libc.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Rich Felker <dalias@libc.org> Link: https://lore.kernel.org/r/20200901150438.228887-1-ulf.hansson@linaro.org
2020-09-07mmc: sdhci-msm: Add retries when all tuning phases are found validDouglas Anderson1-1/+17
As the comments in this patch say, if we tune and find all phases are valid it's _almost_ as bad as no phases being found valid. Probably all phases are not really reliable but we didn't detect where the unreliable place is. That means we'll essentially be guessing and hoping we get a good phase. This is not just a problem in theory. It was causing real problems on a real board. On that board, most often phase 10 is found as the only invalid phase, though sometimes 10 and 11 are invalid and sometimes just 11. Some percentage of the time, however, all phases are found to be valid. When this happens, the current logic will decide to use phase 11. Since phase 11 is sometimes found to be invalid, this is a bad choice. Sure enough, when phase 11 is picked we often get mmc errors later in boot. I have seen cases where all phases were found to be valid 3 times in a row, so increase the retry count to 10 just to be extra sure. Fixes: 415b5a75da43 ("mmc: sdhci-msm: Add platform_execute_tuning implementation") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200827075809.1.If179abf5ecb67c963494db79c3bc4247d987419b@changeid Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: sdhci-acpi: Clear amd_sdhci_host on resetRaul E Rangel1-7/+24
The commit 61d7437ed1390 ("mmc: sdhci-acpi: Fix HS400 tuning for AMDI0040") broke resume for eMMC HS400. When the system suspends the eMMC controller is powered down. So, on resume we need to reinitialize the controller. Although, amd_sdhci_host was not getting cleared, so the DLL was never re-enabled on resume. This results in HS400 being non-functional. To fix the problem, this change clears the tuned_clock flag, clears the dll_enabled flag and disables the DLL on reset. Fixes: 61d7437ed1390 ("mmc: sdhci-acpi: Fix HS400 tuning for AMDI0040") Signed-off-by: Raul E Rangel <rrangel@chromium.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200831150517.1.I93c78bfc6575771bb653c9d3fca5eb018a08417d@changeid Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-06Merge tag 'iommu-fixes-v5.9-rc3' of ↵Linus Torvalds6-62/+118
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - three Intel VT-d fixes to fix address handling on 32bit, fix a NULL pointer dereference bug and serialize a hardware register access as required by the VT-d spec. - two patches for AMD IOMMU to force AMD GPUs into translation mode when memory encryption is active and disallow using IOMMUv2 functionality. This makes the AMDGPU driver work when memory encryption is active. - two more fixes for AMD IOMMU to fix updating the Interrupt Remapping Table Entries. - MAINTAINERS file update for the Qualcom IOMMU driver. * tag 'iommu-fixes-v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Handle 36bit addressing for x86-32 iommu/amd: Do not use IOMMUv2 functionality when SME is active iommu/amd: Do not force direct mapping when SME is active iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE iommu/amd: Restore IRTE.RemapEn bit after programming IRTE iommu/vt-d: Fix NULL pointer dereference in dev_iommu_priv_set() iommu/vt-d: Serialize IOMMU GCMD register modifications MAINTAINERS: Update QUALCOMM IOMMU after Arm SMMU drivers move
2020-09-06Merge tag 'for-linus-5.9-rc4-tag' of ↵Linus Torvalds10-16/+211
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: "A small series for fixing a problem with Xen PVH guests when running as backends (e.g. as dom0). Mapping other guests' memory is now working via ZONE_DEVICE, thus not requiring to abuse the memory hotplug functionality for that purpose" * tag 'for-linus-5.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: add helpers to allocate unpopulated memory memremap: rename MEMORY_DEVICE_DEVDAX to MEMORY_DEVICE_GENERIC xen/balloon: add header guard
2020-09-05Merge tags 'auxdisplay-for-linus-v5.9-rc4', ↵Linus Torvalds1-1/+1
'clang-format-for-linus-v5.9-rc4' and 'compiler-attributes-for-linus-v5.9-rc4' of git://github.com/ojeda/linux Pull misc fixes from Miguel Ojeda: "A trivial patch for auxdisplay: - Replace HTTP links with HTTPS ones (Alexander A. Klimov) The usual clang-format trivial update: - Update with the latest for_each macro list (Miguel Ojeda) And Luc requested me to pick a sparse fix on my queue, so here it goes along with other two trivial Compiler Attributes ones (also from Luc). - sparse: use static inline for __chk_{user,io}_ptr() (Luc Van Oostenryck) - Compiler Attributes: fix comment concerning GCC 4.6 (Luc Van Oostenryck) - Compiler Attributes: remove comment about sparse not supporting __has_attribute (Luc Van Oostenryck)" * tag 'auxdisplay-for-linus-v5.9-rc4' of git://github.com/ojeda/linux: auxdisplay: Replace HTTP links with HTTPS ones * tag 'clang-format-for-linus-v5.9-rc4' of git://github.com/ojeda/linux: clang-format: Update with the latest for_each macro list * tag 'compiler-attributes-for-linus-v5.9-rc4' of git://github.com/ojeda/linux: sparse: use static inline for __chk_{user,io}_ptr() Compiler Attributes: fix comment concerning GCC 4.6 Compiler Attributes: remove comment about sparse not supporting __has_attribute
2020-09-05drm: xlnx: dpsub: Fix DMADEVICES Kconfig dependencyLaurent Pinchart1-0/+1
The dpsub driver uses the DMA engine API, and thus selects DMA_ENGINE to provide that API. DMA_ENGINE depends on DMADEVICES, which can be deselected by the user, creating a possibly unmet indirect dependency: WARNING: unmet direct dependencies detected for DMA_ENGINE Depends on [n]: DMADEVICES [=n] Selected by [m]: - DRM_ZYNQMP_DPSUB [=m] && HAS_IOMEM [=y] && (ARCH_ZYNQMP || COMPILE_TEST [=y]) && COMMON_CLK [=y] && DRM [=m] && OF [=y] Add a dependency on DMADEVICES to fix this. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Randy Dunlap <rdunlap@infradead.org>
2020-09-05rapidio: Replace 'select' DMAENGINES 'with depends on'Laurent Pinchart1-1/+1
Enabling a whole subsystem from a single driver 'select' is frowned upon and won't be accepted in new drivers, that need to use 'depends on' instead. Existing selection of DMAENGINES will then cause circular dependencies. Replace them with a dependency. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Randy Dunlap <rdunlap@infradead.org>
2020-09-04Merge tag 'pm-5.9-rc4' of ↵Linus Torvalds3-95/+165
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix reference counting in the operating performance points (OPP) framework and address a few intel_pstate driver issues, mostly related to switching driver operation modes and similar with hardware-managed P-states (HWP) enabled. Specifics: - Fix reference counting of operating performance points (OPP) tables (Viresh Kumar). - Address intel_pstate driver interface issues, mostly related to switching operation modes and handling CPU offline and online and system-wide suspend/resume with hardware-managed P-states (HWP) enabled (Rafael Wysocki). - Fix the maximum frequency computation in the intel_pstate driver with turbo P-states disabled by the platform firmware and HWP enabled (Francisco Jerez)" * tag 'pm-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Fix intel_pstate_get_hwp_max() for turbo disabled cpufreq: intel_pstate: Free memory only when turning off cpufreq: intel_pstate: Add ->offline and ->online callbacks cpufreq: intel_pstate: Tweak the EPP sysfs interface cpufreq: intel_pstate: Update cached EPP in the active mode cpufreq: intel_pstate: Refuse to turn off with HWP enabled opp: Don't drop reference for an OPP table that was never parsed
2020-09-04Merge tag 'libata-5.9-2020-09-04' of git://git.kernel.dk/linux-blockLinus Torvalds3-6/+10
Pull libata fixes from Jens Axboe: - improve Sandisks ATA_HORKAGE on NCQ (Tejun) - link printk cleanup (Xu) * tag 'libata-5.9-2020-09-04' of git://git.kernel.dk/linux-block: libata: implement ATA_HORKAGE_MAX_TRIM_128M and apply to Sandisks ata: ahci: use ata_link_info() instead of ata_link_printk()
2020-09-04Merge tag 'block-5.9-2020-09-04' of git://git.kernel.dk/linux-blockLinus Torvalds8-58/+167
Pull block fixes from Jens Axboe: "A bit larger than usual this week, mostly due to the NVMe fixes arriving late for -rc3 and hence didn't make last weeks pull request. - NVMe: - instance leak and io boundary fixes from Keith - fc locking fix from Christophe - various tcp/rdma reset during traffic fixes from Sagi - pci use-after-free fix from Tong - tcp target null deref fix from Ziye - Locking fix for partition removal (Christoph) - Ensure bdi->io_pages is always set (me) - Fixup for hd struct reference (Ming) - Fix for zero length bvecs (Ming) - Two small blk-iocost fixes (Tejun)" * tag 'block-5.9-2020-09-04' of git://git.kernel.dk/linux-block: block: allow for_each_bvec to support zero len bvec blk-stat: make q->stats->lock irqsafe blk-iocost: ioc_pd_free() shouldn't assume irq disabled block: fix locking in bdev_del_partition block: release disk reference in hd_struct_free_work block: ensure bdi->io_pages is always initialized nvme-pci: cancel nvme device request before disabling nvme: only use power of two io boundaries nvme: fix controller instance leak nvmet-fc: Fix a missed _irqsave version of spin_lock in 'nvmet_fc_fod_op_done()' nvme: Fix NULL dereference for pci nvme controllers nvme-rdma: fix reset hang if controller died in the middle of a reset nvme-rdma: fix timeout handler nvme-rdma: serialize controller teardown sequences nvme-tcp: fix reset hang if controller died in the middle of a reset nvme-tcp: fix timeout handler nvme-tcp: serialize controller teardown sequences nvme: have nvme_wait_freeze_timeout return if it timed out nvme-fabrics: don't check state NVME_CTRL_NEW for request acceptance nvmet-tcp: Fix NULL dereference when a connect data comes in h2cdata pdu
2020-09-04Merge tag 'thermal-v5.9-rc4' of ↵Linus Torvalds4-18/+24
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal fixes from Daniel Lezcano: - Fix bogus thermal shutdowns for omap4430 where bogus values resulting from an incorrect ADC conversion are too high and fire an emergency shutdown (Tony Lindgren) - Don't suppress negative temp for qcom spmi as they are valid and userspace needs them (Veera Vegivada) - Fix use-after-free in thermal_zone_device_unregister reported by Kasan (Dmitry Osipenko) * tag 'thermal-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal: core: Fix use-after-free in thermal_zone_device_unregister() thermal: qcom-spmi-temp-alarm: Don't suppress negative temp thermal: ti-soc-thermal: Fix bogus thermal shutdowns for omap4430
2020-09-04drm/msm: Disable the RPTR shadowJordan Crouse6-27/+43
Disable the RPTR shadow across all targets. It will be selectively re-enabled later for targets that need it. Cc: stable@vger.kernel.org Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-04drm/msm: Disable preemption on all 5xx targetsJordan Crouse1-1/+2
Temporarily disable preemption on a5xx targets pending some improvements to protect the RPTR shadow from being corrupted. Cc: stable@vger.kernel.org Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-04drm/msm: Enable expanded apriv support for a650Jordan Crouse4-4/+19
a650 supports expanded apriv support that allows us to map critical buffers (ringbuffer and memstore) as as privileged to protect them from corruption. Cc: stable@vger.kernel.org Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-04drm/msm: Split the a5xx preemption recordJordan Crouse2-5/+21
The main a5xx preemption record can be marked as privileged to protect it from user access but the counters storage needs to be remain unprivileged. Split the buffers and mark the critical memory as privileged. Cc: stable@vger.kernel.org Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-04Merge tag 'dmaengine-fix-5.9-rc4' of ↵Linus Torvalds9-49/+73
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine fixes from Vinod Koul: "A couple of core fixes and odd driver fixes for dmaengine subsystem: Core: - drop ACPI CSRT table reference after using it - fix of_dma_router_xlate() error handling Drivers fixes in idxd, at_hdmac, pl330, dw-edma and jz478" * tag 'dmaengine-fix-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: ti: k3-udma: Update rchan_oes_offset for am654 SYSFW ABI 3.0 drivers/dma/dma-jz4780: Fix race condition between probe and irq handler dmaengine: dw-edma: Fix scatter-gather address calculation dmaengine: ti: k3-udma: Fix the TR initialization for prep_slave_sg dmaengine: pl330: Fix burst length if burst size is smaller than bus width dmaengine: at_hdmac: add missing kfree() call in at_dma_xlate() dmaengine: at_hdmac: add missing put_device() call in at_dma_xlate() dmaengine: at_hdmac: check return value of of_find_device_by_node() in at_dma_xlate() dmaengine: of-dma: Fix of_dma_router_xlate's of_dma_xlate handling dmaengine: idxd: reset states after device disable or reset dmaengine: acpi: Put the CSRT table after using it
2020-09-04Merge tag 'drm-fixes-2020-09-04' of git://anongit.freedesktop.org/drm/drmLinus Torvalds13-25/+81
Pull drm fixes from Dave Airlie: "Not much going on this week, nouveau has a display hw bug workaround, amdgpu has some PM fixes and CIK regression fixes, one single radeon PLL fix, and a couple of i915 display fixes. amdgpu: - Fix for 32bit systems - SW CTF fix - Update for Sienna Cichlid - CIK bug fixes radeon: - PLL fix i915: - Clang build warning fix - HDCP fixes nouveau: - display fixes" * tag 'drm-fixes-2020-09-04' of git://anongit.freedesktop.org/drm/drm: drm/nouveau/kms/nv50-gp1xx: add WAR for EVO push buffer HW bug drm/nouveau/kms/nv50-gp1xx: disable notifies again after core update drm/nouveau/kms/nv50-: add some whitespace before debug message drm/nouveau/kms/gv100-: Include correct push header in crcc37d.c drm/radeon: Prefer lower feedback dividers drm/amdgpu: Fix bug in reporting voltage for CIK drm/amdgpu: Specify get_argument function for ci_smu_funcs drm/amd/pm: enable MP0 DPM for sienna_cichlid drm/amd/pm: avoid false alarm due to confusing softwareshutdowntemp setting drm/amd/pm: fix is_dpm_running() run error on 32bit system drm/i915: Clear the repeater bit on HDCP disable drm/i915: Fix sha_text population code drm/i915/display: Ensure that ret is always initialized in icl_combo_phy_verify_state
2020-09-04Merge branch 'simplify-do_wp_page'Linus Torvalds1-8/+0
Merge emailed patches from Peter Xu: "This is a small series that I picked up from Linus's suggestion to simplify cow handling (and also make it more strict) by checking against page refcounts rather than mapcounts. This makes uffd-wp work again (verified by running upmapsort)" Note: this is horrendously bad timing, and making this kind of fundamental vm change after -rc3 is not at all how things should work. The saving grace is that it really is a a nice simplification: 8 files changed, 29 insertions(+), 120 deletions(-) The reason for the bad timing is that it turns out that commit 17839856fd58 ("gup: document and work around 'COW can break either way' issue" broke not just UFFD functionality (as Peter noticed), but Mikulas Patocka also reports that it caused issues for strace when running in a DAX environment with ext4 on a persistent memory setup. And we can't just revert that commit without re-introducing the original issue that is a potential security hole, so making COW stricter (and in the process much simpler) is a step to then undoing the forced COW that broke other uses. Link: https://lore.kernel.org/lkml/alpine.LRH.2.02.2009031328040.6929@file01.intranet.prod.int.rdu2.redhat.com/ * emailed patches from Peter Xu <peterx@redhat.com>: mm: Add PGREUSE counter mm/gup: Remove enfornced COW mechanism mm/ksm: Remove reuse_ksm_page() mm: do_wp_page() simplification
2020-09-04Merge branch 'pm-cpufreq'Rafael J. Wysocki1-88/+148
* pm-cpufreq: cpufreq: intel_pstate: Fix intel_pstate_get_hwp_max() for turbo disabled cpufreq: intel_pstate: Free memory only when turning off cpufreq: intel_pstate: Add ->offline and ->online callbacks cpufreq: intel_pstate: Tweak the EPP sysfs interface cpufreq: intel_pstate: Update cached EPP in the active mode cpufreq: intel_pstate: Refuse to turn off with HWP enabled
2020-09-04mm/gup: Remove enfornced COW mechanismPeter Xu1-8/+0
With the more strict (but greatly simplified) page reuse logic in do_wp_page(), we can safely go back to the world where cow is not enforced with writes. This essentially reverts commit 17839856fd58 ("gup: document and work around 'COW can break either way' issue"). There are some context differences due to some changes later on around it: 2170ecfa7688 ("drm/i915: convert get_user_pages() --> pin_user_pages()", 2020-06-03) 376a34efa4ee ("mm/gup: refactor and de-duplicate gup_fast() code", 2020-06-03) Some lines moved back and forth with those, but this revert patch should have striped out and covered all the enforced cow bits anyways. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-04driver core: Fix device_pm_lock() locking for device linksSaravana Kannan1-4/+0
This commit fixes two issues: 1. The lockdep warning reported by Dong Aisheng <dongas86@gmail.com> [1]. It is a warning about a cycle (dpm_list_mtx --> kn->active#3 --> fw_lock) that was introduced when device-link devices were added to expose device link information in sysfs. The patch that "introduced" this cycle can't be reverted because it's fixes a real SRCU issue and also ensures that the device-link device is deleted as soon as the device-link is deleted. This is important to avoid sysfs name collisions if the device-link is create again immediately (this can happen a lot with deferred probing). 2. Inconsistency in grabbing device_pm_lock() during device link deletion Some device link deletion code paths grab device_pm_lock(), while others don't. The device_pm_lock() is grabbed during device_link_add() because it checks if the supplier is in the dpm_list and also reorders the dpm_list. However, when a device link is deleted, it does not do either of those and therefore device_pm_lock() is not necessary. Dropping the device_pm_lock() in all the device link deletion paths removes the inconsistency in locking. Thanks to Stephen Boyd for helping me understand the lockdep splat. Fixes: 843e600b8a2b ("driver core: Fix sleeping in invalid context during device link deletion") [1] - https://lore.kernel.org/lkml/CAA+hA=S4eAreb7vo69LAXSk2t5=DEKNxHaiY1wSpk4xTp9urLg@mail.gmail.com/ Reported-by: Dong Aisheng <dongas86@gmail.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Tested-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20200901184445.1736658-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-04driver code: print symbolic error codeMichał Mirosław1-2/+2
dev_err_probe() prepends the message with an error code. Let's make it more readable by translating the code to a more recognisable symbol. Fixes: a787e5400a1c ("driver core: add device probe log helper") Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/ea3f973e4708919573026fdce52c264db147626d.1598630856.git.mirq-linux@rere.qmqm.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-04video: fbdev: fix OOB read in vga_8planes_imageblit()Tetsuo Handa1-1/+1
syzbot is reporting OOB read at vga_8planes_imageblit() [1], for "cdat[y] >> 4" can become a negative value due to "const char *cdat". [1] https://syzkaller.appspot.com/bug?id=0d7a0da1557dcd1989e00cb3692b26d4173b4132 Reported-by: syzbot <syzbot+69fbd3e01470f169c8c4@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/90b55ec3-d5b0-3307-9f7c-7ff5c5fd6ad3@i-love.sakura.ne.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-04uas: bump hw_max_sectors to 2048 blocks for SS or faster drivesTom Yan1-0/+2
There's no reason for uas to use a smaller value of max_sectors than usb-storage. Signed-off-by: Tom Yan <tom.ty89@gmail.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200903181725.2931-3-tom.ty89@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-04uas: fix sdev->host->dma_devTom Yan1-6/+11
Use scsi_add_host_with_dma() instead of scsi_add_host(). When the scsi request queue is initialized/allocated, hw_max_sectors is clamped to the dma max mapping size. Therefore, the correct device that should be used for the clamping needs to be set. The same clamping is still needed in uas as hw_max_sectors could be changed there. The original clamping would be invalidated in such cases. Signed-off-by: Tom Yan <tom.ty89@gmail.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200903181725.2931-2-tom.ty89@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-04usb-storage: fix sdev->host->dma_devTom Yan2-3/+4
Use scsi_add_host_with_dma() instead of scsi_add_host(). When the scsi request queue is initialized/allocated, hw_max_sectors is clamped to the dma max mapping size. Therefore, the correct device that should be used for the clamping needs to be set. The same clamping is still needed in usb-storage as hw_max_sectors could be changed there. The original clamping would be invalidated in such cases. Signed-off-by: Tom Yan <tom.ty89@gmail.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200903181725.2931-1-tom.ty89@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-04usb/host: ehci-npcm7xx: Use pm_ptr() macroPaul Cercueil1-5/+3
Use the newly introduced pm_ptr() macro, and mark the suspend/resume functions __maybe_unused. These functions can then be moved outside the CONFIG_PM_SUSPEND block, and the compiler can then process them and detect build failures independently of the config. If unused, they will simply be discarded by the compiler. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200903112554.34263-4-paul@crapouillou.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-04usb/host: ehci-spear: Use pm_ptr() macroPaul Cercueil1-5/+3
Use the newly introduced pm_ptr() macro, and mark the suspend/resume functions __maybe_unused. These functions can then be moved outside the CONFIG_PM_SUSPEND block, and the compiler can then process them and detect build failures independently of the config. If unused, they will simply be discarded by the compiler. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200903112554.34263-3-paul@crapouillou.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-04usb/host: ehci-platform: Use pm_ptr() macroPaul Cercueil1-5/+3
Use the newly introduced pm_ptr() macro, and mark the suspend/resume functions __maybe_unused. These functions can then be moved outside the CONFIG_PM_SUSPEND block, and the compiler can then process them and detect build failures independently of the config. If unused, they will simply be discarded by the compiler. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200903112554.34263-5-paul@crapouillou.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-04usb/misc: usb3503: Use pm_ptr() macroPaul Cercueil1-10/+8
Use the newly introduced pm_ptr() macro, and mark the suspend/resume functions __maybe_unused. These functions can then be moved outside the CONFIG_PM_SUSPEND block, and the compiler can then process them and detect build failures independently of the config. If unused, they will simply be discarded by the compiler. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200903112554.34263-8-paul@crapouillou.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-04usb/misc: usb4604: Use pm_ptr() macroPaul Cercueil1-5/+3
Use the newly introduced pm_ptr() macro, and mark the suspend/resume functions __maybe_unused. These functions can then be moved outside the CONFIG_PM_SUSPEND block, and the compiler can then process them and detect build failures independently of the config. If unused, they will simply be discarded by the compiler. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200903112554.34263-9-paul@crapouillou.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-04usb: core: driver: fix stray tabs in error messagesSergey Shtylyov1-5/+3
Commit 8bb54ab573ec ("usbcore: add usb_device_driver definition") added the printk() calls with the error massages spoilt due to the stray tabs in the middle. Remove these tabs and convert printk() calls to pr_err() for consistency with the other code, while at it. Fixes: 8bb54ab573ec ("usbcore: add usb_device_driver definition") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/4beb55c4-eb34-7744-155f-033b8f527e23@omprussia.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-04usb: core: fix slab-out-of-bounds Read in read_descriptorsZeng Tao1-0/+5
The USB device descriptor may get changed between two consecutive enumerations on the same device for some reason, such as DFU or malicius device. In that case, we may access the changing descriptor if we don't take the device lock here. The issue is reported: https://syzkaller.appspot.com/bug?id=901a0d9e6519ef8dc7acab25344bd287dd3c7be9 Cc: stable <stable@vger.kernel.org> Cc: Alan Stern <stern@rowland.harvard.edu> Reported-by: syzbot+256e56ddde8b8957eabd@syzkaller.appspotmail.com Fixes: 217a9081d8e6 ("USB: add all configs to the "descriptors" attribute") Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com> Link: https://lore.kernel.org/r/1599201467-11000-1-git-send-email-prime.zeng@hisilicon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-04Revert "usb: dwc3: meson-g12a: fix shared reset control use"Amjad Ouled-Ameur1-9/+6
This reverts commit 7a410953d1fb4dbe91ffcfdee9cbbf889d19b0d7. This commit breaks USB on meson-gxl-s905x-libretech-cc. Reverting the change solves the issue. In fact, according to the reset framework code, consumers must not use reset_control_(de)assert() on shared reset lines when reset_control_reset has been used, and vice-versa. Moreover, with this commit, usb is not guaranted to be reset since the reset is likely to be initially deasserted. Reverting the commit will bring back the suspend warning mentioned in the commit description. Nevertheless, a warning is much less critical than breaking dwc3-meson-g12a USB completely. We will address the warning issue in another way as a 2nd step. Fixes: 7a410953d1fb ("usb: dwc3: meson-g12a: fix shared reset control use") Cc: stable <stable@vger.kernel.org> Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com> Reported-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20200827144810.26657-1-aouledameur@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-04usb: typec: ucsi: acpi: Check the _DEP dependenciesHeikki Krogerus1-0/+4
Failing probe with -EPROBE_DEFER until all dependencies listed in the _DEP (Operation Region Dependencies) object have been met. This will fix an issue where on some platforms UCSI ACPI driver fails to probe because the address space handler for the operation region that the UCSI ACPI interface uses has not been loaded yet. Fixes: 8243edf44152 ("usb: typec: ucsi: Add ACPI driver") Cc: stable@vger.kernel.org Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200904110918.51546-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-04usb: typec: intel_pmc_mux: Un-register the USB role switchMadhusudanarao Amara1-0/+2
Added missing code for un-register USB role switch in the remove and error path. Cc: Stable <stable@vger.kernel.org> # v5.8 Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Fixes: 6701adfa9693b ("usb: typec: driver for Intel PMC mux control") Signed-off-by: Madhusudanarao Amara <madhusudanarao.amara@intel.com> Link: https://lore.kernel.org/r/20200825183811.7262-1-madhusudanarao.amara@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-04usb: Fix out of sync data toggle if a configured device is reconfiguredMathias Nyman1-49/+42
Userspace drivers that use a SetConfiguration() request to "lightweight" reset an already configured usb device might cause data toggles to get out of sync between the device and host, and the device becomes unusable. The xHCI host requires endpoints to be dropped and added back to reset the toggle. If USB core notices the new configuration is the same as the current active configuration it will avoid these extra steps by calling usb_reset_configuration() instead of usb_set_configuration(). A SetConfiguration() request will reset the device side data toggles. Make sure usb_reset_configuration() function also drops and adds back the endpoints to ensure data toggles are in sync. To avoid code duplication split the current usb_disable_device() function and reuse the endpoint specific part. Cc: stable <stable@vger.kernel.org> Tested-by: Martin Thierer <mthierer@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200901082528.12557-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-04Merge tag 'icc-5.9-rc4' of https://git.linaro.org/people/georgi.djakov/linux ↵Greg Kroah-Hartman2-10/+27
into char-misc-linus Georgi writes: interconnect fixes for v5.9 This contains two fixes: - Fix the core to show correctly the bandwidth for disabled paths. - Fix a driver to make sure small values are not truncated. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> * tag 'icc-5.9-rc4' of https://git.linaro.org/people/georgi.djakov/linux: interconnect: qcom: Fix small BW votes being truncated to zero interconnect: Show bandwidth for disabled paths as zero in debugfs
2020-09-04drm/virtio: drop virtio_gpu_output->enabledGerd Hoffmann3-6/+1
Not needed, already tracked by drm_crtc_state->active. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20200818072511.6745-3-kraxel@redhat.com (cherry picked from commit 1174c8a0f33c1e5c442ac40381fe124248c08b3a)
2020-09-04Merge tag 'phy-fixes-5.9' of ↵Greg Kroah-Hartman4-17/+53
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-linus Vinod writes: phy: fixes for 5.9 *) platform_no_drv_owner.cocci and return value check qcom ipq806x-usb driver *) correcting register programming for ipq8074 phy *) disable PHY charger detect for omap-usb2-phy * tag 'phy-fixes-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: omap-usb2-phy: disable PHY charger detect phy: qcom-qmp: Use correct values for ipq8074 PCIe Gen2 PHY init phy: qualcomm: fix return value check in qcom_ipq806x_usb_phy_probe() phy: qualcomm: fix platform_no_drv_owner.cocci warnings
2020-09-04Merge tag 'soundwire-5.9-fixes' of ↵Greg Kroah-Hartman2-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-linus Vinod writes: soundwire fixes for v5.8 This contains two fixes to sdw core for dangling pointer and a typo for INTSTAT register * tag 'soundwire-5.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: fix double free of dangling pointer soundwire: bus: fix typo in comment on INTSTAT registers
2020-09-04iommu/vt-d: Handle 36bit addressing for x86-32Chris Wilson1-7/+7
Beware that the address size for x86-32 may exceed unsigned long. [ 0.368971] UBSAN: shift-out-of-bounds in drivers/iommu/intel/iommu.c:128:14 [ 0.369055] shift exponent 36 is too large for 32-bit type 'long unsigned int' If we don't handle the wide addresses, the pages are mismapped and the device read/writes go astray, detected as DMAR faults and leading to device failure. The behaviour changed (from working to broken) in commit fa954e683178 ("iommu/vt-d: Delegate the dma domain to upper layer"), but the error looks older. Fixes: fa954e683178 ("iommu/vt-d: Delegate the dma domain to upper layer") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: James Sewart <jamessewart@arista.com> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: <stable@vger.kernel.org> # v5.3+ Link: https://lore.kernel.org/r/20200822160209.28512-1-chris@chris-wilson.co.uk Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-09-04iommu/amd: Do not use IOMMUv2 functionality when SME is activeJoerg Roedel1-0/+7
When memory encryption is active the device is likely not in a direct mapped domain. Forbid using IOMMUv2 functionality for now until finer grained checks for this have been implemented. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200824105415.21000-3-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-09-04iommu/amd: Do not force direct mapping when SME is activeJoerg Roedel1-1/+6
Do not force devices supporting IOMMUv2 to be direct mapped when memory encryption is active. This might cause them to be unusable because their DMA mask does not include the encryption bit. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200824105415.21000-2-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-09-04iommu/amd: Use cmpxchg_double() when updating 128-bit IRTESuravee Suthikulpanit3-7/+33
When using 128-bit interrupt-remapping table entry (IRTE) (a.k.a GA mode), current driver disables interrupt remapping when it updates the IRTE so that the upper and lower 64-bit values can be updated safely. However, this creates a small window, where the interrupt could arrive and result in IO_PAGE_FAULT (for interrupt) as shown below. IOMMU Driver Device IRQ ============ =========== irte.RemapEn=0 ... change IRTE IRQ from device ==> IO_PAGE_FAULT !! ... irte.RemapEn=1 This scenario has been observed when changing irq affinity on a system running I/O-intensive workload, in which the destination APIC ID in the IRTE is updated. Instead, use cmpxchg_double() to update the 128-bit IRTE at once without disabling the interrupt remapping. However, this means several features, which require GA (128-bit IRTE) support will also be affected if cmpxchg16b is not supported (which is unprecedented for AMD processors w/ IOMMU). Fixes: 880ac60e2538 ("iommu/amd: Introduce interrupt remapping ops structure") Reported-by: Sean Osborne <sean.m.osborne@oracle.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Tested-by: Erik Rockstrom <erik.rockstrom@oracle.com> Reviewed-by: Joao Martins <joao.m.martins@oracle.com> Link: https://lore.kernel.org/r/20200903093822.52012-3-suravee.suthikulpanit@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
Powered by cgit, Gruvboxed by Blaster4385.