aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2020-03-24RDMA/core: Ensure security pkey modify is not lostMike Marciniszyn1-8/+3
The following modify sequence (loosely based on ipoib) will lose a pkey modifcation: - Modify (pkey index, port) - Modify (new pkey index, NO port) After the first modify, the qp_pps list will have saved the pkey and the unit on the main list. During the second modify, get_new_pps() will fetch the port from qp_pps and read the new pkey index from qp_attr->pkey_index. The state will still be zero, or IB_PORT_PKEY_NOT_VALID. Because of the invalid state, the new values will never replace the one in the qp pps list, losing the new pkey. This happens because the following if statements will never correct the state because the first term will be false. If the code had been executed, it would incorrectly overwrite valid values. if ((qp_attr_mask & IB_QP_PKEY_INDEX) && (qp_attr_mask & IB_QP_PORT)) new_pps->main.state = IB_PORT_PKEY_VALID; if (!(qp_attr_mask & (IB_QP_PKEY_INDEX | IB_QP_PORT)) && qp_pps) { new_pps->main.port_num = qp_pps->main.port_num; new_pps->main.pkey_index = qp_pps->main.pkey_index; if (qp_pps->main.state != IB_PORT_PKEY_NOT_VALID) new_pps->main.state = IB_PORT_PKEY_VALID; } Fix by joining the two if statements with an or test to see if qp_pps is non-NULL and in the correct state. Fixes: 1dd017882e01 ("RDMA/core: Fix protection fault in get_pkey_idx_qp_list") Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Kaike Wan <[email protected]> Signed-off-by: Mike Marciniszyn <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-03-24Input: synaptics-rmi4 - set reduced reporting mode only when requestedAndrew Duggan1-2/+2
The previous patch "c5ccf2ad3d33 (Input: synaptics-rmi4 - switch to reduced reporting mode)" enabled reduced reporting mode unintentionally on some devices, if the firmware was configured with default Delta X/Y threshold values. The result unintentionally degrade the performance of some touchpads. This patch checks to see that the driver is modifying the delta X/Y thresholds before modifying the reporting mode. Signed-off-by: Andrew Duggan <[email protected]> Fixes: c5ccf2ad3d33 ("Input: synaptics-rmi4 - switch to reduced reporting mode") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2020-03-24Input: synaptics - enable RMI on HP Envy 13-ad105ngYussuf Khalil1-0/+1
This laptop (and perhaps other variants of the same model) reports an SMBus-capable Synaptics touchpad. Everything (including suspend and resume) works fine when RMI is enabled via the kernel command line, so let's add it to the whitelist. Signed-off-by: Yussuf Khalil <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2020-03-24net/mlx5e: Do not recover from a non-fatal syndromeAya Levin1-2/+1
For non-fatal syndromes like LOCAL_LENGTH_ERR, recovery shouldn't be triggered. In these scenarios, the RQ is not actually in ERR state. This misleads the recovery flow which assumes that the RQ is really in error state and no more completions arrive, causing crashes on bad page state. Fixes: 8276ea1353a4 ("net/mlx5e: Report and recover from CQE with error on RQ") Signed-off-by: Aya Levin <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-03-24net/mlx5e: Fix ICOSQ recovery flow with Striding RQAya Levin3-8/+26
In striding RQ mode, the buffers of an RX WQE are first prepared and posted to the HW using a UMR WQEs via the ICOSQ. We maintain the state of these in-progress WQEs in the RQ SW struct. In the flow of ICOSQ recovery, the corresponding RQ is not in error state, hence: - The buffers of the in-progress WQEs must be released and the RQ metadata should reflect it. - Existing RX WQEs in the RQ should not be affected. For this, wrap the dealloc of the in-progress WQEs in a function, and use it in the ICOSQ recovery flow instead of mlx5e_free_rx_descs(). Fixes: be5323c8379f ("net/mlx5e: Report and recover from CQE error on ICOSQ") Signed-off-by: Aya Levin <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-03-24net/mlx5e: Fix missing reset of SW metadata in Striding RQ resetAya Levin1-2/+4
When resetting the RQ (moving RQ state from RST to RDY), the driver resets the WQ's SW metadata. In striding RQ mode, we maintain a field that reflects the actual expected WQ head (including in progress WQEs posted to the ICOSQ). It was mistakenly not reset together with the WQ. Fix this here. Fixes: 8276ea1353a4 ("net/mlx5e: Report and recover from CQE with error on RQ") Signed-off-by: Aya Levin <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-03-24net/mlx5e: Enhance ICOSQ WQE info fieldsAya Levin3-6/+7
Add number of WQEBBs (WQE's Basic Block) to WQE info struct. Set the number of WQEBBs on WQE post, and increment the consumer counter (cc) on completion. In case of error completions, the cc was mistakenly not incremented, keeping a gap between cc and pc (producer counter). This failed the recovery flow on the ICOSQ from a CQE error which timed-out waiting for the cc and pc to meet. Fixes: be5323c8379f ("net/mlx5e: Report and recover from CQE error on ICOSQ") Signed-off-by: Aya Levin <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-03-24net/mlx5_core: Set IB capability mask1 to fix ib_srpt connection failureLeon Romanovsky1-0/+3
The cap_mask1 isn't protected by field_select and not listed among RW fields, but it is required to be written to properly initialize ports in IB virtualization mode. Link: https://lore.kernel.org/linux-rdma/[email protected] Fixes: ab118da4c10a ("net/mlx5: Don't write read-only fields in MODIFY_HCA_VPORT_CONTEXT command") Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-03-24i2c: nvidia-gpu: Handle timeout correctly in gpu_i2c_check_status()Kai-Heng Feng1-12/+8
Nvidia card may come with a "phantom" UCSI device, and its driver gets stuck in probe routine, prevents any system PM operations like suspend. There's an unaccounted case that the target time can equal to jiffies in gpu_i2c_check_status(), let's solve that by using readl_poll_timeout() instead of jiffies comparison functions. Fixes: c71bcdcb42a7 ("i2c: add i2c bus driver for NVIDIA GPU") Suggested-by: Andy Shevchenko <[email protected]> Signed-off-by: Kai-Heng Feng <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Reviewed-by: Ajay Gupta <[email protected]> Tested-by: Ajay Gupta <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-03-24Merge tag 'dmaengine-fix-5.6' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds3-13/+22
Pull dmaengine fixes from Vinod Koul: "Late fixes in dmaengine for v5.6: - move .device_release missing log warning to debug - couple of maintainer entries for HiSilicon and IADX drivers - off-by-one fix for idxd driver - documentation warning fixes - TI k3 dma error handling fix" * tag 'dmaengine-fix-5.6' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: ti: k3-udma-glue: Fix an error handling path in 'k3_udma_glue_cfg_rx_flow()' MAINTAINERS: Add maintainer for HiSilicon DMA engine driver dmaengine: idxd: fix off by one on cdev dwq refcount MAINTAINERS: rectify the INTEL IADX DRIVER entry dmaengine: move .device_release missing log warning to debug level docs: dmaengine: provider.rst: get rid of some warnings
2020-03-24gpiolib: acpi: Add quirk to ignore EC wakeups on HP x2 10 CHT + AXP288 modelHans de Goede1-0/+15
There are at least 3 models of the HP x2 10 models: Bay Trail SoC + AXP288 PMIC Cherry Trail SoC + AXP288 PMIC Cherry Trail SoC + TI PMIC Like on the other HP x2 10 models we need to ignore wakeup for ACPI GPIO events on the external embedded-controller pin to avoid spurious wakeups on the HP x2 10 CHT + AXP288 model too. This commit adds an extra DMI based quirk for the HP x2 10 CHT + AXP288 model, ignoring wakeups for ACPI GPIO events on the EC interrupt pin on this model. This fixes spurious wakeups from suspend on this model. Fixes: aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism") Reported-and-tested-by: Marc Lehmann <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Acked-by: Mika Westerberg <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2020-03-23bnxt_en: Reset rings if ring reservation fails during open()Vasundhara Volam1-0/+4
If ring counts are not reset when ring reservation fails, bnxt_init_dflt_ring_mode() will not be called again to reinitialise IRQs when open() is called and results in system crash as napi will also be not initialised. This patch fixes it by resetting the ring counts. Fixes: 47558acd56a7 ("bnxt_en: Reserve rings at driver open if none was reserved at probe time.") Signed-off-by: Vasundhara Volam <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-23bnxt_en: Free context memory after disabling PCI in probe error path.Michael Chan1-3/+3
Other shutdown code paths will always disable PCI first to shutdown DMA before freeing context memory. Do the same sequence in the error path of probe to be safe and consistent. Fixes: c20dc142dd7b ("bnxt_en: Disable bus master during PCI shutdown and driver unload.") Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-23bnxt_en: Return error if bnxt_alloc_ctx_mem() fails.Michael Chan1-4/+4
The current code ignores the return value from bnxt_hwrm_func_backing_store_cfg(), causing the driver to proceed in the init path even when this vital firmware call has failed. Fix it by propagating the error code to the caller. Fixes: 1b9394e5a2ad ("bnxt_en: Configure context memory on new devices.") Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-23bnxt_en: fix memory leaks in bnxt_dcbnl_ieee_getets()Edwin Peer1-5/+10
The allocated ieee_ets structure goes out of scope without being freed, leaking memory. Appropriate result codes should be returned so that callers do not rely on invalid data passed by reference. Also cache the ETS config retrieved from the device so that it doesn't need to be freed. The balance of the code was clearly written with the intent of having the results of querying the hardware cached in the device structure. The commensurate store was evidently missed though. Fixes: 7df4ae9fe855 ("bnxt_en: Implement DCBNL to support host-based DCBX.") Signed-off-by: Edwin Peer <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-23bnxt_en: Fix Priority Bytes and Packets counters in ethtool -S.Michael Chan3-6/+14
There is an indexing bug in determining these ethtool priority counters. Instead of using the queue ID to index, we need to normalize by modulo 10 to get the index. This index is then used to obtain the proper CoS queue counter. Rename bp->pri2cos to bp->pri2cos_idx to make this more clear. Fixes: e37fed790335 ("bnxt_en: Add ethtool -S priority counters.") Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-23macsec: restrict to ethernet devicesWillem de Bruijn1-0/+3
Only attach macsec to ethernet devices. Syzbot was able to trigger a KMSAN warning in macsec_handle_frame by attaching to a phonet device. Macvlan has a similar check in macvlan_port_create. v1->v2 - fix commit message typo Reported-by: syzbot <[email protected]> Signed-off-by: Willem de Bruijn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-23net: qmi_wwan: add support for ASKEY WWHC050Pawel Dembicki1-0/+1
ASKEY WWHC050 is a mcie LTE modem. The oem configuration states: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1690 ProdID=7588 Rev=ff.ff S: Manufacturer=Android S: Product=Android S: SerialNumber=813f0eef6e6e C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Tested on openwrt distribution. Signed-off-by: Cezary Jackiewicz <[email protected]> Signed-off-by: Pawel Dembicki <[email protected]> Acked-by: Bjørn Mork <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-23NFC: fdp: Fix a signedness bug in fdp_nci_send_patch()Dan Carpenter1-3/+2
The nci_conn_max_data_pkt_payload_size() function sometimes returns -EPROTO so "max_size" needs to be signed for the error handling to work. We can make "payload_size" an int as well. Fixes: a06347c04c13 ("NFC: Add Intel Fields Peak NFC solution driver") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-23Merge tag 'mlx5-fixes-2020-03-05' of ↵David S. Miller6-8/+11
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2020-03-05 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. For -stable v5.4 ('net/mlx5: DR, Fix postsend actions write length') For -stable v5.5 ('net/mlx5e: kTLS, Fix TCP seq off-by-1 issue in TX resync flow') ('net/mlx5e: Fix endianness handling in pedit mask') ==================== Reviewed-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-23IB/hfi1: Ensure pq is not left on waitlistMike Marciniszyn1-3/+22
The following warning can occur when a pq is left on the dmawait list and the pq is then freed: WARNING: CPU: 47 PID: 3546 at lib/list_debug.c:29 __list_add+0x65/0xc0 list_add corruption. next->prev should be prev (ffff939228da1880), but was ffff939cabb52230. (next=ffff939cabb52230). Modules linked in: mmfs26(OE) mmfslinux(OE) tracedev(OE) 8021q garp mrp ib_isert iscsi_target_mod target_core_mod crc_t10dif crct10dif_generic opa_vnic rpcrdma ib_iser libiscsi scsi_transport_iscsi ib_ipoib(OE) bridge stp llc iTCO_wdt iTCO_vendor_support intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crct10dif_pclmul crct10dif_common crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd ast ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm pcspkr joydev drm_panel_orientation_quirks i2c_i801 mei_me lpc_ich mei wmi ipmi_si ipmi_devintf ipmi_msghandler nfit libnvdimm acpi_power_meter acpi_pad hfi1(OE) rdmavt(OE) rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_core binfmt_misc numatools(OE) xpmem(OE) ip_tables nfsv3 nfs_acl nfs lockd grace sunrpc fscache igb ahci libahci i2c_algo_bit dca libata ptp pps_core crc32c_intel [last unloaded: i2c_algo_bit] CPU: 47 PID: 3546 Comm: wrf.exe Kdump: loaded Tainted: G W OE ------------ 3.10.0-957.41.1.el7.x86_64 #1 Hardware name: HPE.COM HPE SGI 8600-XA730i Gen10/X11DPT-SB-SG007, BIOS SBED1229 01/22/2019 Call Trace: [<ffffffff91f65ac0>] dump_stack+0x19/0x1b [<ffffffff91898b78>] __warn+0xd8/0x100 [<ffffffff91898bff>] warn_slowpath_fmt+0x5f/0x80 [<ffffffff91a1dabe>] ? ___slab_alloc+0x24e/0x4f0 [<ffffffff91b97025>] __list_add+0x65/0xc0 [<ffffffffc03926a5>] defer_packet_queue+0x145/0x1a0 [hfi1] [<ffffffffc0372987>] sdma_check_progress+0x67/0xa0 [hfi1] [<ffffffffc03779d2>] sdma_send_txlist+0x432/0x550 [hfi1] [<ffffffff91a20009>] ? kmem_cache_alloc+0x179/0x1f0 [<ffffffffc0392973>] ? user_sdma_send_pkts+0xc3/0x1990 [hfi1] [<ffffffffc0393e3a>] user_sdma_send_pkts+0x158a/0x1990 [hfi1] [<ffffffff918ab65e>] ? try_to_del_timer_sync+0x5e/0x90 [<ffffffff91a3fe1a>] ? __check_object_size+0x1ca/0x250 [<ffffffffc0395546>] hfi1_user_sdma_process_request+0xd66/0x1280 [hfi1] [<ffffffffc034e0da>] hfi1_aio_write+0xca/0x120 [hfi1] [<ffffffff91a4245b>] do_sync_readv_writev+0x7b/0xd0 [<ffffffff91a4409e>] do_readv_writev+0xce/0x260 [<ffffffff918df69f>] ? pick_next_task_fair+0x5f/0x1b0 [<ffffffff918db535>] ? sched_clock_cpu+0x85/0xc0 [<ffffffff91f6b16a>] ? __schedule+0x13a/0x860 [<ffffffff91a442c5>] vfs_writev+0x35/0x60 [<ffffffff91a4447f>] SyS_writev+0x7f/0x110 [<ffffffff91f78ddb>] system_call_fastpath+0x22/0x27 The issue happens when wait_event_interruptible_timeout() returns a value <= 0. In that case, the pq is left on the list. The code continues sending packets and potentially can complete the current request with the pq still on the dmawait list provided no descriptor shortage is seen. If the pq is torn down in that state, the sdma interrupt handler could find the now freed pq on the list with list corruption or memory corruption resulting. Fix by adding a flush routine to ensure that the pq is never on a list after processing a request. A follow-up patch series will address issues with seqlock surfaced in: https://lore.kernel.org/r/[email protected] The seqlock use for sdma will then be converted to a spin lock since the list_empty() doesn't need the protection afforded by the sequence lock currently in use. Fixes: a0d406934a46 ("staging/rdma/hfi1: Add page lock limit check for SDMA requests") Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Kaike Wan <[email protected]> Signed-off-by: Mike Marciniszyn <[email protected]> Signed-off-by: Dennis Dalessandro <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-03-23iwlwifi: don't send GEO_TX_POWER_LIMIT if no wgds tableGolan Ben Ami3-13/+24
The GEO_TX_POWER_LIMIT command was sent although there is no wgds table, so the fw got wrong SAR values from the driver. Fix this by avoiding sending the command if no wgds tables are available. Signed-off-by: Golan Ben Ami <[email protected]> Fixes: 39c1a9728f93 ("iwlwifi: refactor the SAR tables from mvm to acpi") Signed-off-by: Luca Coelho <[email protected]> Tested-By: Jonathan McDowell <[email protected]> Tested-by: Len Brown <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20200318081237.46db40617cc6.Id5cf852ec8c5dbf20ba86bad7b165a0c828f8b2e@changeid
2020-03-23iwlwifi: pcie: add 0x2526/0x401* devices back to cfg detectionLuca Coelho1-0/+3
Three devices, with PCI device ID 0x2526 and subdevice IDs 0x4010, 0x4018 and 0x401C were removed accidentally. Add them back. Reported-by: Brett Hassal <[email protected]> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206661 Fixes: 0b295a1eb81f ("iwlwifi: add device name to device_info") Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20200317123331.16762b29f26c.I928bcaa799e7b3d33838c0667714eeb9fa665290@changeid
2020-03-23dmaengine: ti: k3-udma-glue: Fix an error handling path in ↵Christophe JAILLET1-10/+19
'k3_udma_glue_cfg_rx_flow()' All but one error handling paths in the 'k3_udma_glue_cfg_rx_flow()' function 'goto err' and call 'k3_udma_glue_release_rx_flow()'. This not correct because this function has a 'channel->flows_ready--;' at the end, but 'flows_ready' has not been incremented here, when we branch to the error handling path. In order to keep a correct value in 'flows_ready', un-roll 'k3_udma_glue_release_rx_flow()', simplify it, add some labels and branch at the correct places when an error is detected. Doing so, we also NULLify 'flow->udma_rflow' in a path that was lacking it. Fixes: d70241913413 ("dmaengine: ti: k3-udma: Add glue layer for non DMAengine user") Signed-off-by: Christophe JAILLET <[email protected]> Acked-by: Peter Ujfalusi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2020-03-23dmaengine: idxd: fix off by one on cdev dwq refcountDave Jiang1-2/+2
The refcount check for dedicated workqueue (dwq) is off by one and allows more than 1 user to open the char device. Fix check so only a single user can open the device. Fixes: 42d279f9137a ("dmaengine: idxd: add char driver to expose submission portal to userland") Signed-off-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/158403020187.10208.14117394394540710774.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <[email protected]>
2020-03-22Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-1/+1
Merge misc fixes from Andrew Morton: "10 fixes" * emailed patches from Andrew Morton <[email protected]>: x86/mm: split vmalloc_sync_all() mm, slub: prevent kmalloc_node crashes and memory leaks mm/mmu_notifier: silence PROVE_RCU_LIST warnings epoll: fix possible lost wakeup on epoll_ctl() path mm: do not allow MADV_PAGEOUT for CoW pages mm, memcg: throttle allocators based on ancestral memory.high mm, memcg: fix corruption on 64-bit divisor in memory.high throttling page-flags: fix a crash at SetPageError(THP_SWAP) mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case memcg: fix NULL pointer dereference in __mem_cgroup_usage_unregister_event
2020-03-22i2c: hix5hd2: add missed clk_disable_unprepare in removeChuhong Yuan1-0/+1
The driver forgets to disable and unprepare clk when remove. Add a call to clk_disable_unprepare to fix it. Signed-off-by: Chuhong Yuan <[email protected]> Signed-off-by: Wolfram Sang <[email protected]> Cc: [email protected]
2020-03-21net: bcmgenet: always enable status blocksDoug Berger2-97/+38
The hardware offloading of the NETIF_F_HW_CSUM and NETIF_F_RXCSUM features requires the use of Transmit Status Blocks before transmit frame data and Receive Status Blocks before receive frame data to carry the checksum information. Unfortunately, these status blocks are currently only enabled when the NETIF_F_HW_CSUM feature is enabled. As a result NETIF_F_RXCSUM will not actually be offloaded to the hardware unless both it and NETIF_F_HW_CSUM are enabled. Fortunately, that is the default configuration. This commit addresses this issue by always enabling the use of status blocks on both transmit and receive frames. Further, it replaces the use of a dedicated flag within the driver private data structure with direct use of the netdev features flags. Fixes: 810155397890 ("net: bcmgenet: use CHECKSUM_COMPLETE for NETIF_F_RXCSUM") Signed-off-by: Doug Berger <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-21net: phy: dp83867: w/a for fld detect threshold bootstrapping issueGrygorii Strashko1-1/+20
When the DP83867 PHY is strapped to enable Fast Link Drop (FLD) feature STRAP_STS2.STRAP_ FLD (reg 0x006F bit 10), the Energy Lost Threshold for FLD Energy Lost Mode FLD_THR_CFG.ENERGY_LOST_FLD_THR (reg 0x002e bits 2:0) will be defaulted to 0x2. This may cause the phy link to be unstable. The new DP83867 DM recommends to always restore ENERGY_LOST_FLD_THR to 0x1. Hence, restore default value of FLD_THR_CFG.ENERGY_LOST_FLD_THR to 0x1 when FLD is enabled by bootstrapping as recommended by DM. Signed-off-by: Grygorii Strashko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-21net: stmmac: dwmac-rk: fix error path in rk_gmac_probeEmil Renner Berthing1-1/+1
Make sure we clean up devicetree related configuration also when clock init fails. Fixes: fecd4d7eef8b ("net: stmmac: dwmac-rk: Add integrated PHY support") Signed-off-by: Emil Renner Berthing <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-21slcan: not call free_netdev before rtnl_unlock in slcan_openOliver Hartkopp1-0/+3
As the description before netdev_run_todo, we cannot call free_netdev before rtnl_unlock, fix it by reorder the code. This patch is a 1:1 copy of upstream slip.c commit f596c87005f7 ("slip: not call free_netdev before rtnl_unlock in slip_open"). Reported-by: yangerkun <[email protected]> Signed-off-by: Oliver Hartkopp <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-21ionic: make spdxcheck.py happyLukas Bulwahn2-2/+2
Headers ionic_if.h and ionic_regs.h are licensed under three alternative licenses and the used SPDX-License-Identifier expression makes ./scripts/spdxcheck.py complain: drivers/net/ethernet/pensando/ionic/ionic_if.h: 1:52 Syntax error: OR drivers/net/ethernet/pensando/ionic/ionic_regs.h: 1:52 Syntax error: OR As OR is associative, it is irrelevant if the parentheses are put around the first or the second OR-expression. Simply add parentheses to make spdxcheck.py happy. Signed-off-by: Lukas Bulwahn <[email protected]> Acked-by: Shannon Nelson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-21hinic: fix wrong value of MIN_SKB_LENLuo bin1-1/+1
the minimum value of skb len that hw supports is 32 rather than 17 Signed-off-by: Luo bin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-21hinic: fix wrong para of wait_for_completion_timeoutLuo bin2-3/+5
the second input parameter of wait_for_completion_timeout should be jiffies instead of millisecond Signed-off-by: Luo bin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-21hinic: fix out-of-order excution in arm cpuLuo bin4-0/+9
add read barrier in driver code to keep from reading other fileds in dma memory which is writable for hw until we have verified the memory is valid for driver Signed-off-by: Luo bin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-21hinic: fix the bug of clearing event queueLuo bin1-7/+17
should disable eq irq before freeing it, must clear event queue depth in hw before freeing relevant memory to avoid illegal memory access and update consumer idx to avoid invalid interrupt Signed-off-by: Luo bin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-21hinic: fix a bug of waitting for IO stoppedLuo bin1-49/+2
it's unreliable for fw to check whether IO is stopped, so driver wait for enough time to ensure IO process is done in hw before freeing resources Signed-off-by: Luo bin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-21x86/mm: split vmalloc_sync_all()Joerg Roedel1-1/+1
Commit 3f8fd02b1bf1 ("mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()") introduced a call to vmalloc_sync_all() in the vunmap() code-path. While this change was necessary to maintain correctness on x86-32-pae kernels, it also adds additional cycles for architectures that don't need it. Specifically on x86-64 with CONFIG_VMAP_STACK=y some people reported severe performance regressions in micro-benchmarks because it now also calls the x86-64 implementation of vmalloc_sync_all() on vunmap(). But the vmalloc_sync_all() implementation on x86-64 is only needed for newly created mappings. To avoid the unnecessary work on x86-64 and to gain the performance back, split up vmalloc_sync_all() into two functions: * vmalloc_sync_mappings(), and * vmalloc_sync_unmappings() Most call-sites to vmalloc_sync_all() only care about new mappings being synchronized. The only exception is the new call-site added in the above mentioned commit. Shile Zhang directed us to a report of an 80% regression in reaim throughput. Fixes: 3f8fd02b1bf1 ("mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()") Reported-by: kernel test robot <[email protected]> Reported-by: Shile Zhang <[email protected]> Signed-off-by: Joerg Roedel <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Tested-by: Borislav Petkov <[email protected]> Acked-by: Rafael J. Wysocki <[email protected]> [GHES] Cc: Dave Hansen <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Link: https://lists.01.org/hyperkitty/list/[email protected]/thread/4D3JPPHBNOSPFK2KEPC6KGKS6J25AIDB/ Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-03-21Merge tag 'block-5.6-20200320' of git://git.kernel.dk/linux-blockLinus Torvalds2-6/+14
Pull block fixes from Jens Axboe: "Just two NVMe fabrics fixes that should go into 5.6" * tag 'block-5.6-20200320' of git://git.kernel.dk/linux-block: nvmet-tcp: set MSG_MORE only if we actually have more to send nvme-rdma: Avoid double freeing of async event data
2020-03-20Merge branch 'nvme-5.6-rc6' of git://git.infradead.org/nvme into block-5.6Jens Axboe2-6/+14
Pull NVMe fixes from Keith: "Two late nvme fabrics fixes for 5.6: a double free with the rdma transport, and a regression fix for tcp; please pull." * 'nvme-5.6-rc6' of git://git.infradead.org/nvme: nvmet-tcp: set MSG_MORE only if we actually have more to send nvme-rdma: Avoid double freeing of async event data
2020-03-21nvmet-tcp: set MSG_MORE only if we actually have more to sendSagi Grimberg1-3/+9
When we send PDU data, we want to optimize the tcp stack operation if we have more data to send. So when we set MSG_MORE when: - We have more fragments coming in the batch, or - We have a more data to send in this PDU - We don't have a data digest trailer - We optimize with the SUCCESS flag and omit the NVMe completion (used if sq_head pointer update is disabled) This addresses a regression in QD=1 with SUCCESS flag optimization as we unconditionally set MSG_MORE when we didn't actually have more data to send. Fixes: 70583295388a ("nvmet-tcp: implement C2HData SUCCESS optimization") Reported-by: Mark Wunderlich <[email protected]> Tested-by: Mark Wunderlich <[email protected]> Signed-off-by: Sagi Grimberg <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-20Merge tag 'char-misc-5.6-rc7' of ↵Linus Torvalds5-9/+19
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small different driver fixes for 5.6-rc7: - binderfs fix, yet again - slimbus new device id added - hwtracing bugfixes for reported issues and a new device id All of these have been in linux-next with no reported issues" * tag 'char-misc-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: intel_th: pci: Add Elkhart Lake CPU support intel_th: Fix user-visible error codes intel_th: msu: Fix the unexpected state warning stm class: sys-t: Fix the use of time_after() slimbus: ngd: add v2.1.0 compatible binderfs: use refcount for binder control devices too
2020-03-20Merge tag 'staging-5.6-rc7' of ↵Linus Torvalds16-79/+95
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO fixes from Greg KH: "Here are a number of small staging and IIO driver fixes for 5.6-rc7 Nothing major here, just resolutions for some reported problems: - iio bugfixes for a number of different drivers - greybus loopback_test fixes - wfx driver fixes All of these have been in linux-next with no reported issues" * tag 'staging-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: rtl8188eu: Add device id for MERCUSYS MW150US v2 staging: greybus: loopback_test: fix potential path truncations staging: greybus: loopback_test: fix potential path truncation staging: greybus: loopback_test: fix poll-mask build breakage staging: wfx: fix RCU usage between hif_join() and ieee80211_bss_get_ie() staging: wfx: fix RCU usage in wfx_join_finalize() staging: wfx: make warning about pending frame less scary staging: wfx: fix lines ending with a comma instead of a semicolon staging: wfx: fix warning about freeing in-use mutex during device unregister staging/speakup: fix get_word non-space look-ahead iio: ping: set pa_laser_ping_cfg in of_ping_match iio: chemical: sps30: fix missing triggered buffer dependency iio: st_sensors: remap SMO8840 to LIS2DH12 iio: light: vcnl4000: update sampling periods for vcnl4040 iio: light: vcnl4000: update sampling periods for vcnl4200 iio: accel: adxl372: Set iio_chan BE iio: magnetometer: ak8974: Fix negative raw values in sysfs iio: trigger: stm32-timer: disable master mode when stopping iio: adc: stm32-dfsdm: fix sleep in atomic context iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode
2020-03-20Merge tag 'usb-5.6-rc7' of ↵Linus Torvalds11-36/+56
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 5.6-rc7. And there's a thunderbolt driver fix thrown in for good measure as well. These fixes are: - new device ids for usb-serial drivers - thunderbolt error code fix - xhci driver fixes - typec fixes - cdc-acm driver fixes - chipidea driver fix - more USB quirks added for devices that need them. All of these have been in linux-next with no reported issues" * tag 'usb-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: cdc-acm: fix rounding error in TIOCSSERIAL USB: cdc-acm: fix close_delay and closing_wait units in TIOCSSERIAL usb: quirks: add NO_LPM quirk for RTL8153 based ethernet adapters usb: chipidea: udc: fix sleeping function called from invalid context USB: serial: pl2303: add device-id for HP LD381 USB: serial: option: add ME910G1 ECM composition 0x110b usb: host: xhci-plat: add a shutdown usb: typec: ucsi: displayport: Fix a potential race during registration usb: typec: ucsi: displayport: Fix NULL pointer dereference USB: Disable LPM on WD19's Realtek Hub usb: xhci: apply XHCI_SUSPEND_DELAY to AMD XHCI controller 1022:145c xhci: Do not open code __print_symbolic() in xhci trace events thunderbolt: Fix error code in tb_port_is_width_supported()
2020-03-20Merge tag 'tty-5.6-rc7' of ↵Linus Torvalds1-8/+6
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty fixes from Greg KH: "Here are three small tty_io bugfixes for reported issues that Eric has resolved for 5.6-rc7 All of these have been in linux-next with no reported issues" * tag 'tty-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: fix compat TIOCGSERIAL checking wrong function ptr tty: fix compat TIOCGSERIAL leaking uninitialized memory tty: drop outdated comments about release_tty() locking
2020-03-20Merge tag 'drm-fixes-2020-03-20' of git://anongit.freedesktop.org/drm/drmLinus Torvalds17-83/+104
Pull drm fixes from Dave Airlie: "Hope you are well hiding out above the garage. A few amdgpu changes but nothing too major. I've had a wisdom tooth out this week so haven't been to on top of things, but all seems good. core: - fix lease warning i915: - Track active elements during dequeue - Fix failure to handle all MCR ranges - Revert unnecessary workaround amdgpu: - Pageflip fix - VCN clockgating fixes - GPR debugfs fix for umr - GPU reset fix - eDP fix for MBP - DCN2.x fix dw-hdmi: - fix AVI frame colorimetry komeda: - fix compiler warning bochs: - downgrade a binding failure to a warning" * tag 'drm-fixes-2020-03-20' of git://anongit.freedesktop.org/drm/drm: drm/amd/display: Fix pageflip event race condition for DCN. drm/amdgpu: fix typo for vcn2.5/jpeg2.5 idle check drm/amdgpu: fix typo for vcn2/jpeg2 idle check drm/amdgpu: fix typo for vcn1 idle check drm/lease: fix WARNING in idr_destroy drm/i915: Handle all MCR ranges Revert "drm/i915/tgl: Add extra hdc flush workaround" drm/i915/execlists: Track active elements during dequeue drm/bochs: downgrade pci_request_region failure from error to warning drm/amd/display: Add link_rate quirk for Apple 15" MBP 2017 drm/amdgpu: add fbdev suspend/resume on gpu reset drm/amd/amdgpu: Fix GPR read from debugfs (v2) drm/amd/display: fix typos for dcn20_funcs and dcn21_funcs struct drm/komeda: mark PM functions as __maybe_unused drm/bridge: dw-hdmi: fix AVI frame colorimetry
2020-03-19cxgb4: fix Txq restart check during backpressureRahul Lakkireddy1-2/+8
Driver reclaims descriptors in much smaller batches, even if hardware indicates more to reclaim, during backpressure. So, fix the check to restart the Txq during backpressure, by looking at how many descriptors hardware had indicated to reclaim, and not on how many descriptors that driver had actually reclaimed. Once the Txq is restarted, driver will reclaim even more descriptors when Tx path is entered again. Fixes: d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") Signed-off-by: Rahul Lakkireddy <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-19cxgb4: fix throughput drop during Tx backpressureRahul Lakkireddy1-40/+2
commit 7c3bebc3d868 ("cxgb4: request the TX CIDX updates to status page") reverted back to getting Tx CIDX updates via DMA, instead of interrupts, introduced by commit d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") However, it missed reverting back several code changes where Tx CIDX updates are not explicitly requested during backpressure when using interrupt mode. These missed changes cause slow recovery during backpressure because the corresponding interrupt no longer comes and hence results in Tx throughput drop. So, revert back these missed code changes, as well, which will allow explicitly requesting Tx CIDX updates when backpressure happens. This enables the corresponding interrupt with Tx CIDX update message to get generated and hence speed up recovery and restore back throughput. Fixes: 7c3bebc3d868 ("cxgb4: request the TX CIDX updates to status page") Fixes: d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") Signed-off-by: Rahul Lakkireddy <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-19net: dsa: mt7530: Change the LINK bit to reflect the link statusRené van Dorst1-2/+2
Andrew reported: After a number of network port link up/down changes, sometimes the switch port gets stuck in a state where it thinks it is still transmitting packets but the cpu port is not actually transmitting anymore. In this state you will see a message on the console "mtk_soc_eth 1e100000.ethernet eth0: transmit timed out" and the Tx counter in ifconfig will be incrementing on virtual port, but not incrementing on cpu port. The issue is that MAC TX/RX status has no impact on the link status or queue manager of the switch. So the queue manager just queues up packets of a disabled port and sends out pause frames when the queue is full. Change the LINK bit to reflect the link status. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Reported-by: Andrew Smith <[email protected]> Signed-off-by: René van Dorst <[email protected]> Reviewed-by: Vivien Didelot <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-19mlxsw: pci: Only issue reset when system is readyIdo Schimmel1-11/+39
During initialization the driver issues a software reset command and then waits for the system status to change back to "ready" state. However, before issuing the reset command the driver does not check that the system is actually in "ready" state. On Spectrum-{1,2} systems this was always the case as the hardware initialization time is very short. On Spectrum-3 systems this is no longer the case. This results in the software reset command timing-out and the driver failing to load: [ 6.347591] mlxsw_spectrum3 0000:06:00.0: Cmd exec timed-out (opcode=40(ACCESS_REG),opcode_mod=0,in_mod=0) [ 6.358382] mlxsw_spectrum3 0000:06:00.0: Reg cmd access failed (reg_id=9023(mrsr),type=write) [ 6.368028] mlxsw_spectrum3 0000:06:00.0: cannot register bus device [ 6.375274] mlxsw_spectrum3: probe of 0000:06:00.0 failed with error -110 Fix this by waiting for the system to become ready both before issuing the reset command and afterwards. In case of failure, print the last system status to aid in debugging. Fixes: da382875c616 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.