| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.6-rc7:
- Track active elements during dequeue
- Fix failure to handle all MCR ranges
- Revert unnecessary workaround
Signed-off-by: Dave Airlie <[email protected]>
From: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://people.freedesktop.org/~agd5f/linux into drm-fixes
amd-drm-fixes-5.6-2020-03-19:
amdgpu:
- Pageflip fix
- VCN clockgating fixes
- GPR debugfs fix for umr
- GPU reset fix
- eDP fix for MBP
- DCN2.x fix
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Commit '16f17eda8bad ("drm/amd/display: Send vblank and user
events at vsartup for DCN")' introduces a new way of pageflip
completion handling for DCN, and some trouble.
The current implementation introduces a race condition, which
can cause pageflip completion events to be sent out one vblank
too early, thereby confusing userspace and causing flicker:
prepare_flip_isr():
1. Pageflip programming takes the ddev->event_lock.
2. Sets acrtc->pflip_status == AMDGPU_FLIP_SUBMITTED
3. Releases ddev->event_lock.
--> Deadline for surface address regs double-buffering passes on
target pipe.
4. dc_commit_updates_for_stream() MMIO programs the new pageflip
into hw, but too late for current vblank.
=> pflip_status == AMDGPU_FLIP_SUBMITTED, but flip won't complete
in current vblank due to missing the double-buffering deadline
by a tiny bit.
5. VSTARTUP trigger point in vblank is reached, VSTARTUP irq fires,
dm_dcn_crtc_high_irq() gets called.
6. Detects pflip_status == AMDGPU_FLIP_SUBMITTED and assumes the
pageflip has been completed/will complete in this vblank and
sends out pageflip completion event to userspace and resets
pflip_status = AMDGPU_FLIP_NONE.
=> Flip completion event sent out one vblank too early.
This behaviour has been observed during my testing with measurement
hardware a couple of time.
The commit message says that the extra flip event code was added to
dm_dcn_crtc_high_irq() to prevent missing to send out pageflip events
in case the pflip irq doesn't fire, because the "DCH HUBP" component
is clock gated and doesn't fire pflip irqs in that state. Also that
this clock gating may happen if no planes are active. This suggests
that the problem addressed by that commit can't happen if planes
are active.
The proposed solution is therefore to only execute the extra pflip
completion code iff the count of active planes is zero and otherwise
leave pflip completion handling to the pflip irq handler, for a
more race-free experience.
Note that i don't know if this fixes the problem the original commit
tried to address, as i don't know what the test scenario was. It
does fix the observed too early pageflip events though and points
out the problem introduced.
Fixes: 16f17eda8bad ("drm/amd/display: Send vblank and user events at vsartup for DCN")
Reviewed-by: Nicholas Kazlauskas <[email protected]>
Signed-off-by: Mario Kleiner <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- rtsx_pci: Fix support for some various speed modes
- sdhci-of-at91: Fix support for GPIO card detect on SAMA5D2
- sdhci-cadence: Fix support for DDR52 speed mode for eMMC on UniPhier
- sdhci-acpi: Fix broken WP support on Acer Aspire Switch 10
- sdhci-acpi: Workaround FW bug for suspend on Lenovo Miix 320
* tag 'mmc-v5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: rtsx_pci: Fix support for speed-modes that relies on tuning
mmc: sdhci-of-at91: fix cd-gpios for SAMA5D2
mmc: sdhci-cadence: set SDHCI_QUIRK2_PRESET_VALUE_BROKEN for UniPhier
mmc: sdhci-acpi: Disable write protect detection on Acer Aspire Switch 10 (SW5-012)
mmc: sdhci-acpi: Switch signal voltage back to 3.3V on suspend on external microSD on Lenovo Miix 320
|
|
I have hit the following build error:
armv7a-hardfloat-linux-gnueabi-ld: drivers/rtc/rtc-max8907.o: in function `max8907_rtc_probe':
rtc-max8907.c:(.text+0x400): undefined reference to `regmap_irq_get_virq'
max8907 should select REGMAP_IRQ
Fixes: 94c01ab6d7544 ("rtc: add MAX8907 RTC driver")
Cc: stable <[email protected]>
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
We precompute the static-static ECDH during configuration time, in order
to save an expensive computation later when receiving network packets.
However, not all ECDH computations yield a contributory result. Prior,
we were just not letting those peers be added to the interface. However,
this creates a strange inconsistency, since it was still possible to add
other weird points, like a valid public key plus a low-order point, and,
like points that result in zeros, a handshake would not complete. In
order to make the behavior more uniform and less surprising, simply
allow all peers to be added. Then, we'll error out later when doing the
crypto if there's an issue. This also adds more separation between the
crypto layer and the configuration layer.
Discussed-with: Mathias Hall-Andersen <[email protected]>
Signed-off-by: Jason A. Donenfeld <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The situation in which we wind up hitting the default case here
indicates a major bug in earlier parsing code. It is not a usual thing
that should ever happen, which means a "friendly" message for it doesn't
make sense. Rather, replace this with a WARN_ON, just like we do earlier
in the file for a similar situation, so that somebody sends us a bug
report and we can fix it.
Reported-by: Fabian Freyer <[email protected]>
Signed-off-by: Jason A. Donenfeld <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We carry out checks to the effect of:
if (skb->protocol != wg_examine_packet_protocol(skb))
goto err;
By having wg_skb_examine_untrusted_ip_hdr return 0 on failure, this
means that the check above still passes in the case where skb->protocol
is zero, which is possible to hit with AF_PACKET:
struct sockaddr_pkt saddr = { .spkt_device = "wg0" };
unsigned char buffer[5] = { 0 };
sendto(socket(AF_PACKET, SOCK_PACKET, /* skb->protocol = */ 0),
buffer, sizeof(buffer), 0, (const struct sockaddr *)&saddr, sizeof(saddr));
Additional checks mean that this isn't actually a problem in the code
base, but I could imagine it becoming a problem later if the function is
used more liberally.
I would prefer to fix this by having wg_examine_packet_protocol return a
32-bit ~0 value on failure, which will never match any value of
skb->protocol, which would simply change the generated code from a mov
to a movzx. However, sparse complains, and adding __force casts doesn't
seem like a good idea, so instead we just add a simple helper function
to check for the zero return value. Since wg_examine_packet_protocol
itself gets inlined, this winds up not adding an additional branch to
the generated code, since the 0 return value already happens in a
mergable branch.
Reported-by: Fabian Freyer <[email protected]>
Signed-off-by: Jason A. Donenfeld <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
- drm/lease: fix WARNING in idr_destroy
- Fix AVI frame colorimetry in the dw-hdmi bridge.
- Fix compiler warning in komeda by annotating functions as __maybe_unused.
- Downgrade bochs pci_request_region failure from error to warning to
workaround firmware fb.
Signed-off-by: Dave Airlie <[email protected]>
From: Maarten Lankhorst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
gro_cells_init() returns error if memory allocation is failed.
But the vxlan module doesn't check the return value of gro_cells_init().
Fixes: 58ce31cca1ff ("vxlan: GRO support at tunnel layer")`
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
fix typo for vcn2.5/jpeg2.5 idle check
Signed-off-by: James Zhu <[email protected]>
Reviewed-by: Leo Liu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
fix typo for vcn2/jpeg2 idle check
Signed-off-by: James Zhu <[email protected]>
Reviewed-by: Leo Liu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
fix typo for vcn1 idle check
Signed-off-by: James Zhu <[email protected]>
Reviewed-by: Leo Liu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
drm_lease_create takes ownership of leases. And leases will be released
by drm_master_put.
drm_master_put
->drm_master_destroy
->idr_destroy
So we needn't call idr_destroy again.
Reported-and-tested-by: [email protected]
Signed-off-by: Qiujun Huang <[email protected]>
Cc: [email protected]
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Commit 77654350306a ("take compat TIOC[SG]SERIAL treatment into
tty_compat_ioctl()") changed the compat version of TIOCGSERIAL to start
checking for the presence of the ->set_serial function pointer rather
than ->get_serial. This appears to be a copy-and-paste error, since
->get_serial is the function pointer that is called as well as the
pointer that is checked by the non-compat version of TIOCGSERIAL.
Fix this by checking the correct function pointer.
Fixes: 77654350306a ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()")
Cc: <[email protected]> # v4.20+
Signed-off-by: Eric Biggers <[email protected]>
Acked-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Commit 77654350306a ("take compat TIOC[SG]SERIAL treatment into
tty_compat_ioctl()") changed the compat version of TIOCGSERIAL to start
copying a whole 'serial_struct32' to userspace rather than individual
fields, but failed to initialize all padding and fields -- namely the
hole after the 'iomem_reg_shift' field, and the 'reserved' field.
Fix this by initializing the struct to zero.
[v2: use sizeof, and convert the adjacent line for consistency.]
Reported-by: [email protected]
Fixes: 77654350306a ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()")
Cc: <[email protected]> # v4.20+
Signed-off-by: Eric Biggers <[email protected]>
Acked-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The current version of the TTY code unlocks the tty_struct(s) before
release_tty() rather than after. Moreover, tty_unlock_pair() no longer
exists. Thus, remove the outdated comments regarding tty_unlock_pair().
Signed-off-by: Eric Biggers <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The TX/RX register should not be treated the same way to allow for better
support of tuning. Fix this by using a default initial value for TX.
Signed-off-by: Ricky Wu <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
[Ulf: Updated changelog]
Signed-off-by: Ulf Hansson <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
|
|
This adds support for the Trace Hub in Elkhart Lake CPU.
Signed-off-by: Alexander Shishkin <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
There are a few places in the driver that end up returning ENOTSUPP to
the user, replace those with EINVAL.
Signed-off-by: Alexander Shishkin <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Fixes: ba82664c134ef ("intel_th: Add Memory Storage Unit driver")
Cc: [email protected] # v4.4+
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The unexpected state warning should only warn on illegal state
transitions. Fix that.
Signed-off-by: Alexander Shishkin <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Fixes: 615c164da0eb4 ("intel_th: msu: Introduce buffer interface")
Cc: [email protected] # v5.4+
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The operands of time_after() are in a wrong order in both instances in
the sys-t driver. Fix that.
Signed-off-by: Alexander Shishkin <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Fixes: 39f10239df75 ("stm class: p_sys-t: Add support for CLOCKSYNC packets")
Fixes: d69d5e83110f ("stm class: Add MIPI SyS-T protocol support")
Cc: [email protected] # v4.20+
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
First set of IIO fixes in the 5.6 cycle.
* adxl372
- Fix marking of buffered values as big endian.
* ak8974
- Fix wrong handling of negative values when read from sysfs.
* at91-sama5d2
- Fix differential mode by ensuring configuration set correctly.
* ping
- Use the write sensor type for of_ping_match table.
* sps30
- Kconfig build dependency fix.
* st-sensors
- Fix a wrong identification of which part the SMO8840 ACPI ID indicates.
* stm32-dsfdm
- Fix a sleep in atomic issue by not using a trigger when it makes no sense.
* stm32-timer
- Make sure master mode is disabled when stopping.
* vcnl400
- Update some sampling periods based on new docs.
* tag 'iio-fixes-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: ping: set pa_laser_ping_cfg in of_ping_match
iio: chemical: sps30: fix missing triggered buffer dependency
iio: st_sensors: remap SMO8840 to LIS2DH12
iio: light: vcnl4000: update sampling periods for vcnl4040
iio: light: vcnl4000: update sampling periods for vcnl4200
iio: accel: adxl372: Set iio_chan BE
iio: magnetometer: ak8974: Fix negative raw values in sysfs
iio: trigger: stm32-timer: disable master mode when stopping
iio: adc: stm32-dfsdm: fix sleep in atomic context
iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.6-rc7
Here are a couple of new device ids for 5.6-rc.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.6-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: pl2303: add device-id for HP LD381
USB: serial: option: add ME910G1 ECM composition 0x110b
|
|
The indentation for the returned values are weird, causing those
warnings:
./drivers/net/phy/sfp-bus.c:579: WARNING: Unexpected indentation.
./drivers/net/phy/sfp-bus.c:619: WARNING: Unexpected indentation.
Use a list and change the identation for it to be properly
parsed by the documentation toolchain.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
last_keep_alive_jiffies is updated in probe and when a keep-alive
event is received. In case the driver times-out on a keep-alive event,
it has high chances of continuously timing-out on keep-alive events.
This is because when the driver recovers from the keep-alive-timeout reset
the value of last_keep_alive_jiffies is very old, and if a keep-alive
event is not received before the next timer expires, the value of
last_keep_alive_jiffies will cause another keep-alive-timeout reset
and so forth in a loop.
Solution:
Update last_keep_alive_jiffies whenever the device is restored after
reset.
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Noam Dagan <[email protected]>
Signed-off-by: Arthur Kiyanovski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Rx req_id is an index in struct ena_eth_io_rx_cdesc_base.
The driver should validate that the Rx req_id it received from
the device is in range [0, ring_size -1]. Failure to do so could
yield to potential memory access violoation.
The validation was mistakenly done when refilling
the Rx submission queue and not in Rx completion queue.
Fixes: ad974baef2a1 ("net: ena: add support for out of order rx buffers refill")
Signed-off-by: Noam Dagan <[email protected]>
Signed-off-by: Arthur Kiyanovski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Bug:
In short the main issue is caused by the fact that the number of queues
is changed using ethtool after ena_probe() has been called and before
ena_up() was executed. Here is the full scenario in detail:
* ena_probe() is called when the driver is loaded, the driver is not up
yet at the end of ena_probe().
* The number of queues is changed -> io_queue_count is changed as well -
ena_up() is not called since the "dev_was_up" boolean in
ena_update_queue_count() is false.
* ena_up() is called by the kernel (it's called asynchronously some
time after ena_probe()). ena_setup_io_intr() is called by ena_up() and
it uses io_queue_count to get the suitable irq lines for each msix
vector. The function ena_request_io_irq() is called right after that
and it uses msix_vecs - This value only changes during ena_probe() and
ena_restore() - to request the irq vectors. This results in "Failed to
request I/O IRQ" error for i > io_queue_count.
Numeric example:
* After ena_probe() io_queue_count = 8, msix_vecs = 9.
* The number of queues changes to 4 -> io_queue_count = 4, msix_vecs = 9.
* ena_up() is executed for the first time:
** ena_setup_io_intr() inits the vectors only up to io_queue_count.
** ena_request_io_irq() calls request_irq() and fails for i = 5.
How to reproduce:
simply run the following commands:
sudo rmmod ena && sudo insmod ena.ko;
sudo ethtool -L eth1 combined 3;
Fix:
Use ENA_MAX_MSIX_VEC(adapter->num_io_queues + adapter->xdp_num_queues)
instead of adapter->msix_vecs. We need to take XDP queues into
consideration as they need to have msix vectors assigned to them as well.
Note that the XDP cannot be attached before the driver is up and running
but in XDP mode the issue might occur when the number of queues changes
right after a reset trigger.
The ENA_MAX_MSIX_VEC simply adds one to the argument since the first msix
vector is reserved for management queue.
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <[email protected]>
Signed-off-by: Arthur Kiyanovski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Overview:
We don't frequently change the msix vectors throughout the life cycle of
the driver. We do so in two functions: ena_probe() and ena_restore().
ena_probe() is only called when the driver is loaded. ena_restore() on the
other hand is called during device reset / resume operations.
We use num_io_queues for calculating and allocating the number of msix
vectors. At ena_probe() this value is equal to max_num_io_queues and thus
this is not an issue, however ena_restore() might be called after the
number of io queues has changed.
A possible bug scenario is as follows:
* Change number of queues from 8 to 4.
(num_io_queues = 4, max_num_io_queues = 8, msix_vecs = 9,)
* Trigger reset occurs -> ena_restore is called.
(num_io_queues = 4, max_num_io_queues =8 , msix_vecs = 5)
* Change number of queues from 4 to 6.
(num_io_queues = 6, max_num_io_queues = 8, msix_vecs = 5)
* The driver will reset due to failure of check_for_rx_interrupt_queue()
Fix:
This can be easily fixed by always using max_num_io_queues to init the
msix_vecs, since this number won't change as opposed to num_io_queues.
Fixes: 4d19266022ec ("net: ena: multiple queue creation related cleanups")
Signed-off-by: Sameeh Jubran <[email protected]>
Signed-off-by: Arthur Kiyanovski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Check clk_prepare_enable() return value.
Fixes: 2c7230446bc9 ("net: phy: Add pm support to Broadcom iProc mdio mux driver")
Signed-off-by: Rayagonda Kokatanur <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
As noted in commit 28c2d1a7a0bf ("net: bcmgenet: enable loopback
during UniMAC sw_reset") the UniMAC must be clocked at least 5
cycles while the sw_reset is asserted to ensure a clean reset.
That commit enabled local loopback to provide an Rx clock from the
GENET sourced Tx clk. However, when connected in MII mode the Tx
clk is sourced by the PHY so if an EPHY is not supplying clocks
(e.g. when the link is down) the UniMAC does not receive the
necessary clocks.
This commit extends the sw_reset window until the PHY reports that
the link is up thereby ensuring that the clocks are being provided
to the MAC to produce a clean reset.
One consequence is that if the system attempts to enter a Wake on
LAN suspend state when the PHY link has not been active the MAC
may not have had a chance to initialize cleanly. In this case, we
remove the sw_reset and enable the WoL reception path as normal
with the hope that the PHY will provide the necessary clocks to
drive the WoL blocks if the link becomes active after the system
has entered suspend.
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This reverts commit 3a55402c93877d291b0a612d25edb03d1b4b93ac.
This is not a good solution when connecting to an external switch
that may not support the isolation of the TXC signal resulting in
output driver contention on the pin.
A different solution is necessary.
Signed-off-by: Doug Berger <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Per the dt-binding the interrupt is optional so use
platform_get_irq_optional() instead of platform_get_irq(). Since
commit 7723f4c5ecdb ("driver core: platform: Add an error message to
platform_get_irq*()") platform_get_irq() produces an error message
orion-mdio f1072004.mdio: IRQ index 0 not found
which is perfectly normal if one hasn't specified the optional property
in the device tree.
Signed-off-by: Chris Packham <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This reverts commit e1f550dc44a4d535da4e25ada1b0eaf8f3417929.
platform_get_irq_optional() will still return -ENXIO when no interrupt
is provided so the additional error handling caused the driver prone to
fail when no interrupt was specified. Revert the change so we can apply
the correct minimal fix.
Signed-off-by: Chris Packham <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
By default, tty_port_init() initializes those parameters to a multiple
of HZ. For instance in line 69 of tty_port.c:
port->close_delay = (50 * HZ) / 100;
https://github.com/torvalds/linux/blob/master/drivers/tty/tty_port.c#L69
With e.g. CONFIG_HZ = 250 (as this is the case for Ubuntu 18.04
linux-image-4.15.0-37-generic), the default setting for close_delay is
thus 125.
When ioctl(fd, TIOCGSERIAL, &s) is executed, the setting returned in
user space is '12' (125/10). When ioctl(fd, TIOCSSERIAL, &s) is then
executed with the same setting '12', the value is interpreted as '120'
which is different from the current setting and a EPERM error may be
raised by set_serial_info() if !CAP_SYS_ADMIN.
https://github.com/torvalds/linux/blob/master/drivers/usb/class/cdc-acm.c#L919
Fixes: ba2d8ce9db0a6 ("cdc-acm: implement TIOCSSERIAL to avoid blocking close(2)")
Signed-off-by: Anthony Mallet <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
close_delay and closing_wait are specified in hundredth of a second but stored
internally in jiffies. Use the jiffies_to_msecs() and msecs_to_jiffies()
functions to convert from each other.
Signed-off-by: Anthony Mallet <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
We have been receiving bug reports that ethernet connections over
RTL8153 based ethernet adapters stops working after a while with
errors like these showing up in dmesg when the ethernet stops working:
[12696.189484] r8152 6-1:1.0 enp10s0u1: Tx timeout
[12702.333456] r8152 6-1:1.0 enp10s0u1: Tx timeout
[12707.965422] r8152 6-1:1.0 enp10s0u1: Tx timeout
This has been reported on Dell WD15 docks, Belkin USB-C Express Dock 3.1
docks and with generic USB to ethernet dongles using the RTL8153
chipsets. Some users have tried adding usbcore.quirks=0bda:8153:k to
the kernel commandline and all users who have tried this report that
this fixes this.
Also note that we already have an existing NO_LPM quirk for the RTL8153
used in the Microsoft Surface Dock (where it uses a different usb-id).
This commit adds a NO_LPM quirk for the generic Realtek RTL8153
0bda:8153 usb-id, fixing the Tx timeout errors on these devices.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198931
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The code calls pm_runtime_get_sync with irq disabled, it causes below
warning:
BUG: sleeping function called from invalid context at
wer/runtime.c:1075
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid:
er/u8:1
CPU: 1 PID: 37 Comm: kworker/u8:1 Not tainted
20200304-00181-gbebfd2a5be98 #1588
Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
Workqueue: ci_otg ci_otg_work
[<c010e8bd>] (unwind_backtrace) from [<c010a315>]
1/0x14)
[<c010a315>] (show_stack) from [<c0987d29>]
5/0x94)
[<c0987d29>] (dump_stack) from [<c013e77f>]
+0xeb/0x118)
[<c013e77f>] (___might_sleep) from [<c052fa1d>]
esume+0x75/0x78)
[<c052fa1d>] (__pm_runtime_resume) from [<c0627a33>]
0x23/0x74)
[<c0627a33>] (ci_udc_pullup) from [<c062fb93>]
nect+0x2b/0xcc)
[<c062fb93>] (usb_gadget_connect) from [<c062769d>]
_connect+0x59/0x104)
[<c062769d>] (ci_hdrc_gadget_connect) from [<c062778b>]
ssion+0x43/0x48)
[<c062778b>] (ci_udc_vbus_session) from [<c062f997>]
s_connect+0x17/0x9c)
[<c062f997>] (usb_gadget_vbus_connect) from [<c062634d>]
bd/0x128)
[<c062634d>] (ci_otg_work) from [<c0134719>]
rk+0x149/0x404)
[<c0134719>] (process_one_work) from [<c0134acb>]
0xf7/0x3bc)
[<c0134acb>] (worker_thread) from [<c0139433>]
x118)
[<c0139433>] (kthread) from [<c01010bd>]
(ret_from_fork+0x11/0x34)
Tested-by: Dmitry Osipenko <[email protected]>
Cc: <[email protected]> #v5.5
Fixes: 72dc8df7920f ("usb: chipidea: udc: protect usb interrupt enable")
Reported-by: Dmitry Osipenko <[email protected]>
Signed-off-by: Peter Chen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- string buffer formatting fixes in picolcd and sensor drivers, from
Takashi Iwai
- two new device IDs from Chen-Tsung Hsieh and Tony Fischetti
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: add ALWAYS_POLL quirk to lenovo pixart mouse
HID: google: add moonball USB id
HID: hid-sensor-custom: Use scnprintf() for avoiding potential buffer overflow
HID: hid-picolcd_fb: Use scnprintf() for avoiding potential buffer overflow
|
|
I/Os could be passed down while the device FC SCSI device is being deleted.
This would result in unnecessary delay of I/O and driver messages (when
extended logging is set).
[mkp: fixed commit hash and added SoB for Nilesh]
Link: https://lore.kernel.org/r/[email protected]
Fixes: 3c75ad1d87c7 ("scsi: qla2xxx: Remove defer flag to indicate immeadiate port loss") # v5.6-rc1+
Tested-by: Laurence Oberman <[email protected]>
Reviewed-by: Laurence Oberman <[email protected]>
Reviewed-by: Ewan D. Milne <[email protected]>
Reviewed-by: Roman Bolshakov <[email protected]>
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Arun Easi <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
This device was added to the stand-alone driver on github.
Add it to the staging driver as well.
Link: https://github.com/lwfinger/rtl8188eu/commit/2141f244c3e7
Signed-off-by: Michael Straube <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Newer GCC warns about possible truncations of two generated path names as
we're concatenating the configurable sysfs and debugfs path prefixes
with a filename and placing the results in buffers of the same size as
the maximum length of the prefixes.
snprintf(d->name, MAX_STR_LEN, "gb_loopback%u", dev_id);
snprintf(d->sysfs_entry, MAX_SYSFS_PATH, "%s%s/",
t->sysfs_prefix, d->name);
snprintf(d->debugfs_entry, MAX_SYSFS_PATH, "%sraw_latency_%s",
t->debugfs_prefix, d->name);
Fix this by separating the maximum path length from the maximum prefix
length and reducing the latter enough to fit the generated strings.
Note that we also need to reduce the device-name buffer size as GCC
isn't smart enough to figure out that we ever only used MAX_STR_LEN
bytes of it.
Fixes: 6b0658f68786 ("greybus: tools: Add tools directory to greybus repo and add loopback")
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Newer GCC warns about a possible truncation of a generated sysfs path
name as we're concatenating a directory path with a file name and
placing the result in a buffer that is half the size of the maximum
length of the directory path (which is user controlled).
loopback_test.c: In function 'open_poll_files':
loopback_test.c:651:31: warning: '%s' directive output may be truncated writing up to 511 bytes into a region of size 255 [-Wformat-truncation=]
651 | snprintf(buf, sizeof(buf), "%s%s", dev->sysfs_entry, "iteration_count");
| ^~
loopback_test.c:651:3: note: 'snprintf' output between 16 and 527 bytes into a destination of size 255
651 | snprintf(buf, sizeof(buf), "%s%s", dev->sysfs_entry, "iteration_count");
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix this by making sure the buffer is large enough the concatenated
strings.
Fixes: 6b0658f68786 ("greybus: tools: Add tools directory to greybus repo and add loopback")
Fixes: 9250c0ee2626 ("greybus: Loopback_test: use poll instead of inotify")
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
A scripted conversion from userland POLL* to kernel EPOLL* constants
mistakingly replaced the poll flags in the loopback_test tool, which
therefore no longer builds.
Fixes: a9a08845e9ac ("vfs: do bulk POLL* -> EPOLL* replacement")
Cc: stable <[email protected]> # 4.16
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
SAMA5D2x doesn't drive CMD line if GPIO is used as CD line (at least
SAMA5D27 doesn't). Fix this by forcing card-detect in the module
if module-controlled CD is not used.
Fixed commit addresses the problem only for non-removable cards. This
amends it to also cover gpio-cd case.
Cc: [email protected]
Fixes: 7a1e3f143176 ("mmc: sdhci-of-at91: force card detect value for non removable devices")
Signed-off-by: Michał Mirosław <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Link: https://lore.kernel.org/r/8d10950d9940468577daef4772b82a071b204716.1584290561.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Ulf Hansson <[email protected]>
|
|
The SDHCI_PRESET_FOR_* registers are not set for the UniPhier platform
integration. (They are all read as zeros).
Set the SDHCI_QUIRK2_PRESET_VALUE_BROKEN quirk flag. Otherwise, the
High Speed DDR mode on the eMMC controller (MMC_TIMING_MMC_DDR52)
would not work.
I split the platform data to give no impact to other platforms,
although the UniPhier platform is currently only the upstream user
of this IP.
The SDHCI_QUIRK2_PRESET_VALUE_BROKEN flag is set if the compatible
string matches to "socionext,uniphier-sd4hc".
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
(SW5-012)
On the Acer Aspire Switch 10 (SW5-012) microSD slot always reports the card
being write-protected even though microSD cards do not have a write-protect
switch at all.
Add a new DMI_QUIRK_SD_NO_WRITE_PROTECT quirk which when set sets
the MMC_CAP2_NO_WRITE_PROTECT flag on the controller for the external SD
slot; and add a DMI quirk table entry which selects this quirk for the
Acer SW5-012.
Signed-off-by: Hans de Goede <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
microSD on Lenovo Miix 320
Based on a sample of 7 DSDTs from Cherry Trail devices using an AXP288
PMIC depending on the design one of 2 possible LDOs on the PMIC is used
for the MMC signalling voltage, either DLDO3 or GPIO1LDO (GPIO1 pin in
low noise LDO mode).
The Lenovo Miix 320-10ICR uses GPIO1LDO in the SHC1 ACPI device's DSM
methods to set 3.3 or 1.8 signalling voltage and this appears to work
as advertised, so presumably the device is actually using GPIO1LDO for
the external microSD signalling voltage.
But this device has a bug in the _PS0 method of the SHC1 ACPI device,
the DSM remembers the last set signalling voltage and the _PS0 restores
this after a (runtime) suspend-resume cycle, but it "restores" the voltage
on DLDO3 instead of setting it on GPIO1LDO as the DSM method does. DLDO3
is used for the LCD and setting it to 1.8V causes the LCD to go black.
This commit works around this issue by calling the Intel DSM to reset the
signal voltage to 3.3V after the host has been runtime suspended.
This will make the _PS0 method reprogram the DLDO3 voltage to 3.3V, which
leaves it at its original setting fixing the LCD going black.
This commit adds and uses a DMI quirk mechanism to only trigger this
workaround on the Lenovo Miix 320 while leaving the behavior of the
driver unchanged on other devices.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=111294
BugLink: https://gitlab.freedesktop.org/drm/intel/issues/355
Reported-by: russianneuromancer <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
For the case where the last mvneta_poll did not process all
RX packets, we need to xor the pp->cause_rx_tx or port->cause_rx_tx
before claculating the rx_queue.
Fixes: 2dcf75e2793c ("net: mvneta: Associate RX queues with each CPU")
Signed-off-by: Jisheng Zhang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
printk in macro vxge_debug_ll uses __VA_ARGS__ without "##" prefix,
it causes a build error when there is no variable
arguments(e.g. only fmt is specified.).
Signed-off-by: Zheng Wei <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|