| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
xrs700x_read_port_counters() updates the stats from a worker using the
u64_stats_update_begin() version. This is okay on 32-UP since on the
reader side preemption is disabled.
On 32bit-SMP the writer can be preempted by the reader at which point
the reader will spin on the seqcount until writer continues and
completes the update.
Assigning the mib_mutex mutex to the underlying seqcount would ensure
proper synchronisation. The API for that on the u64_stats_init() side
isn't available. Since it is the only user, just use disable interrupts
during the update.
Use u64_stats_update_begin_irqsave() on the writer side to ensure an
uninterrupted update.
Fixes: ee00b24f32eb8 ("net: dsa: add Arrow SpeedChips XRS700x driver")
Cc: Andrew Lunn <[email protected]>
Cc: Florian Fainelli <[email protected]>
Cc: George McCollister <[email protected]>
Cc: Vivien Didelot <[email protected]>
Cc: Vladimir Oltean <[email protected]>
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Acked-by: George McCollister <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add support for OPPO R11 USB diag serial port to option driver. This
phone uses Qualcomm Snapdragon 660 SoC.
usb-devices output:
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=22d9 ProdID=276c Rev=04.04
S: Manufacturer=OPPO
S: Product=SDM660-MTP _SN:09C6BCA7
S: SerialNumber=beb2c403
C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
Signed-off-by: Yan Xinyu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
|
|
We have a cross dependency between KVM and VFIO when using
s390 vfio_pci_zdev extensions for PCI passthrough
To be able to keep both subsystem modular we add a registering
hook inside the S390 core code.
This fixes a build problem when VFIO is built-in and KVM is built
as a module.
Reported-by: Randy Dunlap <[email protected]>
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Matthew Rosato <[email protected]>
Reviewed-by: Niklas Schnelle <[email protected]>
Signed-off-by: Pierre Morel <[email protected]>
Fixes: 09340b2fca007 ("KVM: s390: pci: add routines to start/stop interpretive execution")
Cc: <[email protected]>
Acked-by: Janosch Frank <[email protected]>
Acked-by: Randy Dunlap <[email protected]> # build-tested
Link: https://lore.kernel.org/r/[email protected]
Message-Id: <[email protected]>
Signed-off-by: Janosch Frank <[email protected]>
|
|
The rc code is 0 at the error path "status & CC2520_STATUS_TX_UNDERFLOW".
Assign rc code with '-EINVAL' at this error path to fix it.
Signed-off-by: Li Qiong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stefan Schmidt <[email protected]>
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
Add a missing include in the TEE subsystem
* tag 'tee-fix-for-v6.0' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: fix compiler warning in tee_shm_register()
Link: https://lore.kernel.org/r/YwdHcdEUib7obbbW@jade
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.0:
- Remove superfluous interrupt-names from imx8mq-tqma8mq RTC device to
silence dtbs_check warning.
- A few Verdin board fixes on CAN clock frequency, mcp251xfd interrupt,
atmel_mxt_ts reset polarity and USB PHY.
- Remove duplicated node and fix spi-flash compatible for
imx6qdl-kontron-samx6i.
- A couple of i.MX8M Plus DHCOM fixes from Marek Vasut on ECSPI1 pinmux
and I2C5 GPIO assignment.
- A couple of Venice fixes on SAI2 pin settings and phy-mode.
- Drop in-band autoneg for 2500base-x phy-mode on ls1028a-qds-65bb
board.
- Revert the power device name setting change from imx8m-blk-ctrl
driver, as it causes issue for sysfs cleanup path.
- Fix gpcv2 driver to assert reset before ungating clock.
* tag 'imx-fixes-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: freescale: verdin-imx8mp: fix atmel_mxt_ts reset polarity
arm64: dts: freescale: verdin-imx8mm: fix atmel_mxt_ts reset polarity
arm64: dts: imx8mp: Fix I2C5 GPIO assignment on i.MX8M Plus DHCOM
arm64: dts: imx8mm-venice-gw7901: fix port/phy validation
arm64: dts: verdin-imx8mm: add otg2 pd to usbphy
soc: imx: gpcv2: Assert reset before ungating clock
arm64: dts: ls1028a-qds-65bb: don't use in-band autoneg for 2500base-x
ARM: dts: imx6qdl-kontron-samx6i: fix spi-flash compatible
ARM: dts: imx6qdl-kontron-samx6i: remove duplicated node
ARM: dts: imx6qdl-vicut1.dtsi: Fix node name backlight_led
arm64: dts: imx8mq-tqma8mq: Remove superfluous interrupt-names
arm64: dts: imx8mp: Adjust ECSPI1 pinmux on i.MX8M Plus DHCOM
arm64: dts: imx8mp-venice-gw74xx: fix sai2 pin settings
arm64: dts: imx8mm-verdin: use level interrupt for mcp251xfd
arm64: dts: imx8mm-verdin: update CAN clock to 40MHz
Revert "soc: imx: imx8m-blk-ctrl: set power device name"
Link: https://lore.kernel.org/r/20220823092631.GV149610@dragon
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Fix the order of source and destination addresses when resolving the
route between server and client to validate use of correct net device.
The reverse order we had so far didn't actually validate the net device
as the server would try to resolve the route to itself, thus always
getting the server's net device.
The issue was discovered when running cm applications on a single host
between 2 interfaces with same subnet and source based routing rules.
When resolving the reverse route the source based route rules were
ignored.
Fixes: f887f2ac87c2 ("IB/cma: Validate routing of incoming requests")
Link: https://lore.kernel.org/r/1c1ec2277a131d277ebcceec987fd338d35b775f.1661251872.git.leonro@nvidia.com
Signed-off-by: Michael Guralnik <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more hotfixes from Andrew Morton:
"Seventeen hotfixes. Mostly memory management things.
Ten patches are cc:stable, addressing pre-6.0 issues"
* tag 'mm-hotfixes-stable-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
.mailmap: update Luca Ceresoli's e-mail address
mm/mprotect: only reference swap pfn page if type match
squashfs: don't call kmalloc in decompressors
mm/damon/dbgfs: avoid duplicate context directory creation
mailmap: update email address for Colin King
asm-generic: sections: refactor memory_intersects
bootmem: remove the vmemmap pages from kmemleak in put_page_bootmem
ocfs2: fix freeing uninitialized resource on ocfs2_dlm_shutdown
Revert "memcg: cleanup racy sum avoidance code"
mm/zsmalloc: do not attempt to free IS_ERR handle
binder_alloc: add missing mmap_lock calls when using the VMA
mm: re-allow pinning of zero pfns (again)
vmcoreinfo: add kallsyms_num_syms symbol
mailmap: update Guilherme G. Piccoli's email addresses
writeback: avoid use-after-free after removing device
shmem: update folio if shmem_replace_page() updates the page
mm/hugetlb: avoid corrupting page->mapping in hugetlb_mcopy_atomic_pte
|
|
Take the mmap_read_lock() when using the VMA in binder_alloc_print_pages()
and when checking for a VMA in binder_alloc_new_buf_locked().
It is worth noting binder_alloc_new_buf_locked() drops the VMA read lock
after it verifies a VMA exists, but may be taken again deeper in the call
stack, if necessary.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: a43cfc87caaf (android: binder: stop saving a pointer to the VMA)
Signed-off-by: Liam R. Howlett <[email protected]>
Reported-by: Ondrej Mosnacek <[email protected]>
Reported-by: <[email protected]>
Acked-by: Carlos Llamas <[email protected]>
Tested-by: Ondrej Mosnacek <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Christian Brauner (Microsoft) <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Hridya Valsaraju <[email protected]>
Cc: Joel Fernandes <[email protected]>
Cc: Martijn Coenen <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Todd Kjos <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: "Arve Hjønnevåg" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
GPIO mockup debugfs is created in gpio_mockup_probe() but
forgot to remove when remove device. This patch add a devm
managed callback for removing them.
Signed-off-by: Wei Yongjun <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
SW generated completions for outstanding WRs posted on SQ
after QP is in error target the wrong CQ. This causes the
ib_drain_sq to hang with no completion.
Fix this to generate completions on the right CQ.
[ 863.969340] INFO: task kworker/u52:2:671 blocked for more than 122 seconds.
[ 863.979224] Not tainted 5.14.0-130.el9.x86_64 #1
[ 863.986588] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 863.996997] task:kworker/u52:2 state:D stack: 0 pid: 671 ppid: 2 flags:0x00004000
[ 864.007272] Workqueue: xprtiod xprt_autoclose [sunrpc]
[ 864.014056] Call Trace:
[ 864.017575] __schedule+0x206/0x580
[ 864.022296] schedule+0x43/0xa0
[ 864.026736] schedule_timeout+0x115/0x150
[ 864.032185] __wait_for_common+0x93/0x1d0
[ 864.037717] ? usleep_range_state+0x90/0x90
[ 864.043368] __ib_drain_sq+0xf6/0x170 [ib_core]
[ 864.049371] ? __rdma_block_iter_next+0x80/0x80 [ib_core]
[ 864.056240] ib_drain_sq+0x66/0x70 [ib_core]
[ 864.062003] rpcrdma_xprt_disconnect+0x82/0x3b0 [rpcrdma]
[ 864.069365] ? xprt_prepare_transmit+0x5d/0xc0 [sunrpc]
[ 864.076386] xprt_rdma_close+0xe/0x30 [rpcrdma]
[ 864.082593] xprt_autoclose+0x52/0x100 [sunrpc]
[ 864.088718] process_one_work+0x1e8/0x3c0
[ 864.094170] worker_thread+0x50/0x3b0
[ 864.099109] ? rescuer_thread+0x370/0x370
[ 864.104473] kthread+0x149/0x170
[ 864.109022] ? set_kthread_struct+0x40/0x40
[ 864.114713] ret_from_fork+0x22/0x30
Fixes: 81091d7696ae ("RDMA/irdma: Add SW mechanism to generate completions on error")
Link: https://lore.kernel.org/r/[email protected]
Reported-by: Kamal Heib <[email protected]>
Signed-off-by: Shiraz Saleem <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
syzbot is reporting hung task at __input_unregister_device() [1], for
iforce_close() waiting at wait_event_interruptible() with dev->mutex held
is blocking input_disconnect_device() from __input_unregister_device().
It seems that the cause is simply that commit c2b27ef672992a20 ("Input:
iforce - wait for command completion when closing the device") forgot to
call wake_up() after clear_bit().
Fix this problem by introducing a helper that calls clear_bit() followed
by wake_up_all().
Reported-by: syzbot <[email protected]>
Fixes: c2b27ef672992a20 ("Input: iforce - wait for command completion when closing the device")
Tested-by: syzbot <[email protected]>
Suggested-by: Fabio M. De Francesco <[email protected]>
Co-developed-by: Hillf Danton <[email protected]>
Signed-off-by: Hillf Danton <[email protected]>
Signed-off-by: Tetsuo Handa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Fix two issues introduced recently and one driver problem leading to a
NULL pointer dereference in some cases.
Specifics:
- Add missing EXPORT_SYMBOL_GPL in the thermal core and add back the
required 'trips' property to the thermal zone DT bindings (Daniel
Lezcano)
- Prevent the int340x_thermal driver from crashing when a package
with a buffer of 0 length is returned by an ACPI control method
evaluated by it (Lee, Chun-Yi)"
* tag 'thermal-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/int340x_thermal: handle data_vault when the value is ZERO_SIZE_PTR
dt-bindings: thermal: Fix missing required property
thermal/core: Add missing EXPORT_SYMBOL_GPL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Make __resolve_freq() check the presence of the frequency table
instead of checking whether or not the ->target_index() callback is
implemented by the driver, because that need not be the case when
__resolve_freq() is used (Lukasz Luba)"
* tag 'pm-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: check only freq_table in __resolve_freq()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix issues introduced by recent changes related to the handling
of ACPI device properties and a coding mistake in the exit path of the
ACPI processor driver.
Specifics:
- Prevent acpi_thermal_cpufreq_exit() from attempting to remove
the same frequency QoS request multiple times (Riwen Lu)
- Fix type detection for integer ACPI device properties (Stefan
Binding)
- Avoid emitting false-positive warnings when processing ACPI
device properties and drop the useless default case from the
acpi_copy_property_array_uint() macro (Sakari Ailus)"
* tag 'acpi-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: property: Remove default association from integer maximum values
ACPI: property: Ignore already existing data node tags
ACPI: property: Fix type detection of unified integer reading functions
ACPI: processor: Remove freq Qos request for all CPUs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- two minor cleanups
- a fix of the xen/privcmd driver avoiding a possible NULL dereference
in an error case
* tag 'for-linus-6.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/privcmd: fix error exit of privcmd_ioctl_dm_op()
xen: move from strlcpy with unused retval to strscpy
xen: x86: remove setting the obsolete config XEN_MAX_DOMAIN_MEMORY
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes and updates from Helge Deller:
"Mostly just small patches, with the exception of the bigger indenting
cleanups in the sisfb and radeonfb drivers.
Two patches should be mentioned though: A fix-up for fbdev if the
screen resize fails (by Shigeru Yoshida), and a potential divide by
zero fix in fb_pm2fb (by Letu Ren).
Summary:
Major fixes:
- Revert the changes for fbcon console when vc_resize() fails
[Shigeru Yoshida]
- Avoid a potential divide by zero error in fb_pm2fb [Letu Ren]
Minor fixes:
- Add missing pci_disable_device() in chipsfb_pci_init() [Yang
Yingliang]
- Fix tests for platform_get_irq() failure in omapfb [Yu Zhe]
- Destroy mutex on freeing struct fb_info in fbsysfs [Shigeru
Yoshida]
Cleanups:
- Move fbdev drivers from strlcpy to strscpy [Wolfram Sang]
- Indenting fixes, comment fixes, ... [Jiapeng Chong & Jilin Yuan]"
* tag 'fbdev-for-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: fbcon: Properly revert changes when vc_resize() failed
fbdev: Move fbdev drivers from strlcpy to strscpy
fbdev: omap: Remove unnecessary print function dev_err()
fbdev: chipsfb: Add missing pci_disable_device() in chipsfb_pci_init()
fbdev: fbcon: Destroy mutex on freeing struct fb_info
fbdev: radeon: Clean up some inconsistent indenting
fbdev: sisfb: Clean up some inconsistent indenting
fbdev: fb_pm2fb: Avoid potential divide by zero error
fbdev: ssd1307fb: Fix repeated words in comments
fbdev: omapfb: Fix tests for platform_get_irq() failure
|
|
The Lenovo OneLink+ Dock contains an RTL8153 controller that behaves as
a broken CDC device by default. Add the custom Lenovo PID to the r8152
driver to support it properly.
Also, systems compatible with this dock provide a BIOS option to enable
MAC address passthrough (as per Lenovo document "ThinkPad Docking
Solutions 2017"). Add the custom PID to the MAC passthrough list too.
Tested on a ThinkPad 13 1st gen with the expected results:
passthrough disabled: Invalid header when reading pass-thru MAC addr
passthrough enabled: Using pass-thru MAC addr XX:XX:XX:XX:XX:XX
Signed-off-by: Jean-Francois Le Fillatre <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Merge thermal control core fixes for 6.0-rc3:
- Fix missing required property for thermal zone description (Daniel
Lezcano).
- Add missing export symbol for
thermal_zone_device_register_with_trips() (Daniel Lezcano).
* thermal-core:
dt-bindings: thermal: Fix missing required property
thermal/core: Add missing EXPORT_SYMBOL_GPL
|
|
* acpi-processor:
ACPI: processor: Remove freq Qos request for all CPUs
|
|
Referenced commit introduced nfp_policer_validate in the progress
installing rate limiter. This validate check the action id and will
reject police with CONTINUE, which is required to support ingress
police offload.
Fix this issue by allowing FLOW_ACTION_CONTINUE as notexceed action
id in nfp_policer_validate
Fixes: d97b4b105ce7 ("flow_offload: reject offload for all drivers with invalid police parameters")
Signed-off-by: Tianyu Yuan <[email protected]>
Reviewed-by: Baowen Zheng <[email protected]>
Reviewed-by: Louis Peens <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Commit 744d23c71af3 ("net: phy: Warn about incorrect
mdio_bus_phy_resume() state") unveiled that the smsc911x driver was not
properly stopping and restarting the PHY during suspend/resume. Correct
that by indicating that the MAC is in charge of PHY PM operations and
ensure that all MDIO bus activity is quiescent during suspend.
Tested-by: Geert Uytterhoeven <[email protected]>
Tested-by: Marek Szyprowski <[email protected]>
Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM")
Fixes: 2aa70f864955 ("net: smsc911x: Quieten netif during suspend")
Signed-off-by: Florian Fainelli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Commit d60cd06331a3 ("PM: ACPI: reboot: Use S5 for reboot") caused a
reboot hang on one Dell servers so the commit was reverted.
Someone managed to collect the AER log and it's caused by MSI:
[ 148.762067] ACPI: Preparing to enter system sleep state S5
[ 148.794638] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 5
[ 148.803731] {1}[Hardware Error]: event severity: recoverable
[ 148.810191] {1}[Hardware Error]: Error 0, type: fatal
[ 148.816088] {1}[Hardware Error]: section_type: PCIe error
[ 148.822391] {1}[Hardware Error]: port_type: 0, PCIe end point
[ 148.829026] {1}[Hardware Error]: version: 3.0
[ 148.834266] {1}[Hardware Error]: command: 0x0006, status: 0x0010
[ 148.841140] {1}[Hardware Error]: device_id: 0000:04:00.0
[ 148.847309] {1}[Hardware Error]: slot: 0
[ 148.852077] {1}[Hardware Error]: secondary_bus: 0x00
[ 148.857876] {1}[Hardware Error]: vendor_id: 0x14e4, device_id: 0x165f
[ 148.865145] {1}[Hardware Error]: class_code: 020000
[ 148.870845] {1}[Hardware Error]: aer_uncor_status: 0x00100000, aer_uncor_mask: 0x00010000
[ 148.879842] {1}[Hardware Error]: aer_uncor_severity: 0x000ef030
[ 148.886575] {1}[Hardware Error]: TLP Header: 40000001 0000030f 90028090 00000000
[ 148.894823] tg3 0000:04:00.0: AER: aer_status: 0x00100000, aer_mask: 0x00010000
[ 148.902795] tg3 0000:04:00.0: AER: [20] UnsupReq (First)
[ 148.910234] tg3 0000:04:00.0: AER: aer_layer=Transaction Layer, aer_agent=Requester ID
[ 148.918806] tg3 0000:04:00.0: AER: aer_uncor_severity: 0x000ef030
[ 148.925558] tg3 0000:04:00.0: AER: TLP Header: 40000001 0000030f 90028090 00000000
The MSI is probably raised by incoming packets, so power down the device
and disable bus mastering to stop the traffic, as user confirmed this
approach works.
In addition to that, be extra safe and cancel reset task if it's running.
Cc: Josef Bacik <[email protected]>
Link: https://lore.kernel.org/all/b8db79e6857c41dab4ef08bdf826ea7c47e3bafc.1615947283.git.josef@toxicpanda.com/
BugLink: https://bugs.launchpad.net/bugs/1917471
Signed-off-by: Kai-Heng Feng <[email protected]>
Reviewed-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Packets that are not of length divisible by 4 (e.g. 77, 78, 79) would
have the checksum included up to next multiple of 4 (a 77 bytes packet
would have 3 bytes of ethernet checksum included). The check for the
value expects it in host (Little) endian.
Fixes: f3cad2611a77 ("net: sparx5: add hostmode with phylink support")
Signed-off-by: Casper Andersson <[email protected]>
Reviewed-by: Steen Hegelund <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes, lots of amdgpu fixes mostly for IP blocks introduced in
6.0-rc1, otherwise vc4, nouveau fixes.
gem:
- Fix handle release leak
nouveau:
- Fix fencing when moving BO
vc4:
- HDMI fixes
amdgpu:
- GFX 11.0 fixes
- PSP XGMI handling fixes
- GFX9 fix for compute-only IPs
- Drop duplicated function call
- Fix warning due to missing header
- NBIO 7.7 fixes
- DCN 3.1.4 fixes
- SDMA 6.0 fixes
- SMU 13.0 fixes
- Arcturus GPUVM page table fix
- MMHUB 1.0 fix
amdkfd:
- GC 10.3.7 fix
radeon:
- Delayed work flush fix"
* tag 'drm-fixes-2022-08-26-1' of git://anongit.freedesktop.org/drm/drm: (21 commits)
drm/amdgpu: mmVM_L2_CNTL3 register not initialized correctly
drm/amdgpu: add MGCG perfmon setting for gfx11
drm/amdkfd: Fix isa version for the GC 10.3.7
drm/amdgpu: Fix page table setup on Arcturus
drm/amd/pm: update SMU 13.0.0 driver_if header
drm/amdgpu: add sdma instance check for gfx11 CGCG
drm/amd/display: enable PCON support for dcn314
drm/amdgpu: enable NBIO IP v7.7.0 Clock Gating
drm/amdgpu: add NBIO IP v7.7.0 Clock Gating support
drm/amdgpu: add TX_POWER_CTRL_1 macro definitions for NBIO IP v7.7.0
nouveau: explicitly wait on the fence in nouveau_bo_move_m2mf
drm/radeon: add a force flush to delay work when radeon
drm/amd/display: Include missing header
drm/amdgpu: Remove the additional kfd pre reset call for sriov
drm/amdgpu: Check num_gfx_rings for gfx v9_0 rb setup.
drm/amdgpu: fix hive reference leak when adding xgmi device
drm/amdgpu: Move psp_xgmi_terminate call from amdgpu_xgmi_remove_device to psp_hw_fini
drm/amdgpu: enable GFXOFF allow control for GC IP v11.0.1
drm/gem: Fix GEM handle release errors
drm/vc4: hdmi: Rework power up
...
|
|
Pull block fixes from Jens Axboe:
- MD pull request via Song:
- Fix for clustered raid (Guoqing Jiang)
- req_op fix (Bart Van Assche)
- Fix race condition in raid recreate (David Sloan)
- loop configuration overflow fix (Siddh)
- Fix missing commit_rqs call for certain conditions (Yu)
* tag 'block-6.0-2022-08-26' of git://git.kernel.dk/linux-block:
md: call __md_stop_writes in md_stop
Revert "md-raid: destroy the bitmap after destroying the thread"
md: Flush workqueue md_rdev_misc_wq in md_alloc()
md/raid10: Fix the data type of an r10_sync_page_io() argument
loop: Check for overflow while configuring loop
blk-mq: fix io hung due to missing commit_rqs
|
|
fbcon_do_set_font() calls vc_resize() when font size is changed.
However, if if vc_resize() failed, current implementation doesn't
revert changes for font size, and this causes inconsistent state.
syzbot reported unable to handle page fault due to this issue [1].
syzbot's repro uses fault injection which cause failure for memory
allocation, so vc_resize() failed.
This patch fixes this issue by properly revert changes for font
related date when vc_resize() failed.
Link: https://syzkaller.appspot.com/bug?id=3443d3a1fa6d964dd7310a0cb1696d165a3e07c4 [1]
Reported-by: [email protected]
Signed-off-by: Shigeru Yoshida <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
CC: [email protected] # 5.15+
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Ten fixes.
Of the three core changes, the two large ones are a complete reversion
of the async rework and an ALUA timing rework (the latter shouldn't
affect non-ALUA paths).
The remaining patches are all small and all but one in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Revert "Rework asynchronous resume support"
scsi: core: Fix passthrough retry counter handling
scsi: ufs: core: Reduce the power mode change timeout
scsi: storvsc: Remove WQ_MEM_RECLAIM from storvsc_error_wq
scsi: ufs: host: ufs-exynos: Make fsd_ufs_drvs static
scsi: megaraid_sas: Remove unnecessary kfree()
scsi: megaraid_sas: Fix double kfree()
scsi: ufs: core: Enable link lost interrupt
scsi: core: Allow the ALUA transitioning state enough time
scsi: qla2xxx: Disable ATIO interrupt coalesce for quad port ISP27XX
|
|
This patch adds support for the io_uring command pass through, aka
IORING_OP_URING_CMD, to the /dev/null driver. As with all of the
/dev/null functionality, the implementation is just a simple sink
where commands go to die, but it should be useful for developers who
need a simple IORING_OP_URING_CMD test device that doesn't require
any special hardware.
Cc: Arnd Bergmann <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Acked-by: Jens Axboe <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
|
|
Daniel borkmann says:
====================
The following pull-request contains BPF updates for your *net* tree.
We've added 11 non-merge commits during the last 14 day(s) which contain
a total of 13 files changed, 61 insertions(+), 24 deletions(-).
The main changes are:
1) Fix BPF verifier's precision tracking around BPF ring buffer, from Kumar Kartikeya Dwivedi.
2) Fix regression in tunnel key infra when passing FLOWI_FLAG_ANYSRC, from Eyal Birger.
3) Fix insufficient permissions for bpf_sys_bpf() helper, from YiFei Zhu.
4) Fix splat from hitting BUG when purging effective cgroup programs, from Pu Lehui.
5) Fix range tracking for array poke descriptors, from Daniel Borkmann.
6) Fix corrupted packets for XDP_SHARED_UMEM in aligned mode, from Magnus Karlsson.
7) Fix NULL pointer splat in BPF sockmap sk_msg_recvmsg(), from Liu Jian.
8) Add READ_ONCE() to bpf_jit_limit when reading from sysctl, from Kuniyuki Iwashima.
9) Add BPF selftest lru_bug check to s390x deny list, from Daniel Müller.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
In case of drv own fail in reset, we may need to run mac_reset several
times. The sequence would trigger system crash as the log below.
Because we do not re-enable/schedule "tx_napi" before disable it again,
the process would keep waiting for state change in napi_diable(). To
avoid the problem and keep status synchronize for each run, goto final
resource handling if drv own failed.
[ 5857.353423] mt7921e 0000:3b:00.0: driver own failed
[ 5858.433427] mt7921e 0000:3b:00.0: Timeout for driver own
[ 5859.633430] mt7921e 0000:3b:00.0: driver own failed
[ 5859.633444] ------------[ cut here ]------------
[ 5859.633446] WARNING: CPU: 6 at kernel/kthread.c:659 kthread_park+0x11d
[ 5859.633717] Workqueue: mt76 mt7921_mac_reset_work [mt7921_common]
[ 5859.633728] RIP: 0010:kthread_park+0x11d/0x150
[ 5859.633736] RSP: 0018:ffff8881b676fc68 EFLAGS: 00010202
......
[ 5859.633766] Call Trace:
[ 5859.633768] <TASK>
[ 5859.633771] mt7921e_mac_reset+0x176/0x6f0 [mt7921e]
[ 5859.633778] mt7921_mac_reset_work+0x184/0x3a0 [mt7921_common]
[ 5859.633785] ? mt7921_mac_set_timing+0x520/0x520 [mt7921_common]
[ 5859.633794] ? __kasan_check_read+0x11/0x20
[ 5859.633802] process_one_work+0x7ee/0x1320
[ 5859.633810] worker_thread+0x53c/0x1240
[ 5859.633818] kthread+0x2b8/0x370
[ 5859.633824] ? process_one_work+0x1320/0x1320
[ 5859.633828] ? kthread_complete_and_exit+0x30/0x30
[ 5859.633834] ret_from_fork+0x1f/0x30
[ 5859.633842] </TASK>
Cc: [email protected]
Fixes: 0efaf31dec57 ("mt76: mt7921: fix MT7921E reset failure")
Signed-off-by: Deren Wu <[email protected]>
Link: https://lore.kernel.org/r/727eb5ffd3c7c805245e512da150ecf0a7154020.1659452909.git.deren.wu@mediatek.com
Signed-off-by: Johannes Berg <[email protected]>
|
|
It was observed that on a Thinkpad T14 Gen1 (AMD) that the platform
profile is starting up in 'low-power' mode after refreshing what the
firmware had. This is most likely a firmware bug, but as a harmless
workaround set the default profile to 'balanced' at thinkpad_acpi startup.
Reported-by: [email protected]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216347
Signed-off-by: Mario Limonciello <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
According to well-known-leds.txt, we should use "platform::micmute"
instead of "asus::micmute" for the name of the mic-mute LED classdev.
Signed-off-by: PaddyKP_Yao <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.0-2022-08-25:
amdgpu:
- GFX 11.0 fixes
- PSP XGMI handling fixes
- GFX9 fix for compute-only IPs
- Drop duplicated function call
- Fix warning due to missing header
- NBIO 7.7 fixes
- DCN 3.1.4 fixes
- SDMA 6.0 fixes
- SMU 13.0 fixes
- Arcturus GPUVM page table fix
- MMHUB 1.0 fix
amdkfd:
- GC 10.3.7 fix
radeon:
- Delayed work flush fix
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull:
* gem: Fixes handle release leak
* nouveau: Fix fencing when moving BO
* vc4: HDMI fixes
* Backmerging for v6.0-rc1
Signed-off-by: Dave Airlie <[email protected]>
From: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/YwclSWheC+Ai+u+v@linux-uq9g
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from ipsec and netfilter (with one broken Fixes tag).
Current release - new code bugs:
- dsa: don't dereference NULL extack in dsa_slave_changeupper()
- dpaa: fix <1G ethernet on LS1046ARDB
- neigh: don't call kfree_skb() under spin_lock_irqsave()
Previous releases - regressions:
- r8152: fix the RX FIFO settings when suspending
- dsa: microchip: keep compatibility with device tree blobs with no
phy-mode
- Revert "net: macsec: update SCI upon MAC address change."
- Revert "xfrm: update SA curlft.use_time", comply with RFC 2367
Previous releases - always broken:
- netfilter: conntrack: work around exceeded TCP receive window
- ipsec: fix a null pointer dereference of dst->dev on a metadata dst
in xfrm_lookup_with_ifid
- moxa: get rid of asymmetry in DMA mapping/unmapping
- dsa: microchip: make learning configurable and keep it off while
standalone
- ice: xsk: prohibit usage of non-balanced queue id
- rxrpc: fix locking in rxrpc's sendmsg
Misc:
- another chunk of sysctl data race silencing"
* tag 'net-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
net: lantiq_xrx200: restore buffer if memory allocation failed
net: lantiq_xrx200: fix lock under memory pressure
net: lantiq_xrx200: confirm skb is allocated before using
net: stmmac: work around sporadic tx issue on link-up
ionic: VF initial random MAC address if no assigned mac
ionic: fix up issues with handling EAGAIN on FW cmds
ionic: clear broken state on generation change
rxrpc: Fix locking in rxrpc's sendmsg
net: ethernet: mtk_eth_soc: fix hw hash reporting for MTK_NETSYS_V2
MAINTAINERS: rectify file entry in BONDING DRIVER
i40e: Fix incorrect address type for IPv6 flow rules
ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter
net: Fix a data-race around sysctl_somaxconn.
net: Fix a data-race around netdev_unregister_timeout_secs.
net: Fix a data-race around gro_normal_batch.
net: Fix data-races around sysctl_devconf_inherit_init_net.
net: Fix data-races around sysctl_fb_tunnels_only_for_init_net.
net: Fix a data-race around netdev_budget_usecs.
net: Fix data-races around sysctl_max_skb_frags.
net: Fix a data-race around netdev_budget.
...
|
|
In a situation where memory allocation fails, an invalid buffer address
is stored. When this descriptor is used again, the system panics in the
build_skb() function when accessing memory.
Fixes: 7ea6cd16f159 ("lantiq: net: fix duplicated skb in rx descriptor ring")
Signed-off-by: Aleksander Jan Bajkowski <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When the xrx200_hw_receive() function returns -ENOMEM, the NAPI poll
function immediately returns an error.
This is incorrect for two reasons:
* the function terminates without enabling interrupts or scheduling NAPI,
* the error code (-ENOMEM) is returned instead of the number of received
packets.
After the first memory allocation failure occurs, packet reception is
locked due to disabled interrupts from DMA..
Fixes: fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver")
Signed-off-by: Aleksander Jan Bajkowski <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
xrx200_hw_receive() assumes build_skb() always works and goes straight
to skb_reserve(). However, build_skb() can fail under memory pressure.
Add a check in case build_skb() failed to allocate and return NULL.
Fixes: e015593573b3 ("net: lantiq_xrx200: convert to build_skb")
Reported-by: Eric Dumazet <[email protected]>
Signed-off-by: Aleksander Jan Bajkowski <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This is a follow-up to the discussion in [0]. It seems to me that
at least the IP version used on Amlogic SoC's sometimes has a problem
if register MAC_CTRL_REG is written whilst the chip is still processing
a previous write. But that's just a guess.
Adding a delay between two writes to this register helps, but we can
also simply omit the offending second write. This patch uses the second
approach and is based on a suggestion from Qi Duan.
Benefit of this approach is that we can save few register writes, also
on not affected chip versions.
[0] https://www.spinics.net/lists/netdev/msg831526.html
Fixes: bfab27a146ed ("stmmac: add the experimental PCI support")
Suggested-by: Qi Duan <[email protected]>
Suggested-by: Jerome Brunet <[email protected]>
Signed-off-by: Heiner Kallweit <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-08-24 (ixgbe, i40e)
This series contains updates to ixgbe and i40e drivers.
Jake stops incorrect resetting of SYSTIME registers when starting
cyclecounter for ixgbe.
Sylwester corrects a check on source IP address when validating destination
for i40e.
* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: Fix incorrect address type for IPv6 flow rules
ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Assign a random mac address to the VF interface station
address if it boots with a zero mac address in order to match
similar behavior seen in other VF drivers. Handle the errors
where the older firmware does not allow the VF to set its own
station address.
Newer firmware will allow the VF to set the station mac address
if it hasn't already been set administratively through the PF.
Setting it will also be allowed if the VF has trust.
Fixes: fbb39807e9ae ("ionic: support sr-iov operations")
Signed-off-by: R Mohamed Shah <[email protected]>
Signed-off-by: Shannon Nelson <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In looping on FW update tests we occasionally see the
FW_ACTIVATE_STATUS command fail while it is in its EAGAIN loop
waiting for the FW activate step to finsh inside the FW. The
firmware is complaining that the done bit is set when a new
dev_cmd is going to be processed.
Doing a clean on the cmd registers and doorbell before exiting
the wait-for-done and cleaning the done bit before the sleep
prevents this from occurring.
Fixes: fbfb8031533c ("ionic: Add hardware init and device commands")
Signed-off-by: Shannon Nelson <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
There is a case found in heavy testing where a link flap happens just
before a firmware Recovery event and the driver gets stuck in the
BROKEN state. This comes from the driver getting interrupted by a FW
generation change when coming back up from the link flap, and the call
to ionic_start_queues() in ionic_link_status_check() fails. This can be
addressed by having the fw_up code clear the BROKEN bit if seen, rather
than waiting for a user to manually force the interface down and then
back up.
Fixes: 9e8eaf8427b6 ("ionic: stop watchdog when in broken state")
Signed-off-by: Shannon Nelson <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The mmVM_L2_CNTL3 register is not assigned an initial value
Signed-off-by: Qu Huang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Enable GFX11 MGCG perfmon setting.
V2: set rlc to saft mode before setting.
Signed-off-by: Likun Gao <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Correct the isa version for handling KFD test.
Fixes: 7c4f4f197e0c ("drm/amdkfd: Add GC 10.3.6 and 10.3.7 KFD definitions")
Signed-off-by: Prike Liang <[email protected]>
Reviewed-by: Aaron Liu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
When translate_further is enabled, page table depth needs to
be updated. This was missing on Arcturus MMHUB init. This was
causing address translations to fail for SDMA user-mode queues.
Fixes: 352e683b72e7 ("drm/amdgpu: Enable translate_further to extend UTCL2 reach")
Reviewed-by: Felix Kuehling <[email protected]>
Acked-by: Christian König <[email protected]>
Signed-off-by: Mukul Joshi <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
To fit the latest 78.53 PMFW.
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Feifei Xu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
For some ASICs, like GFX IP v11.0.1, only have one SDMA instance,
so not need to configure SDMA1_RLC_CGCG_CTRL for this case.
Signed-off-by: Tim Huang <[email protected]>
Reviewed-by: Yifan Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|