aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2023-05-23HID: wacom: avoid integer overflow in wacom_intuos_inout()Nikita Zhandarovich1-1/+1
If high bit is set to 1 in ((data[3] & 0x0f << 28), after all arithmetic operations and integer promotions are done, high bits in wacom->serial[idx] will be filled with 1s as well. Avoid this, albeit unlikely, issue by specifying left operand's __u64 type for the right operand. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: 3bea733ab212 ("USB: wacom tablet driver reorganization") Signed-off-by: Nikita Zhandarovich <[email protected]> Reviewed-by: Ping Cheng <[email protected]> Cc: [email protected] Signed-off-by: Jiri Kosina <[email protected]>
2023-05-23HID: wacom: Check for string overflow from strscpy callsJason Gerecke1-4/+10
The strscpy function is able to return an error code when a copy would overflow the size of the destination. The copy is stopped and the buffer terminated before overflow actually occurs so it is safe to continue execution, but we should still produce a warning should this occur. Signed-off-by: Jason Gerecke <[email protected]> Reviewed-by: Ping Cheng <[email protected]> Reviewed-by: Peter Hutterer <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2023-05-23lan966x: Fix unloading/loading of the driverHoratiu Vultur1-0/+10
It was noticing that after a while when unloading/loading the driver and sending traffic through the switch, it would stop working. It would stop forwarding any traffic and the only way to get out of this was to do a power cycle of the board. The root cause seems to be that the switch core is initialized twice. Apparently initializing twice the switch core disturbs the pointers in the queue systems in the HW, so after a while it would stop sending the traffic. Unfortunetly, it is not possible to use a reset of the switch here, because the reset line is connected to multiple devices like MDIO, SGPIO, FAN, etc. So then all the devices will get reseted when the network driver will be loaded. So the fix is to check if the core is initialized already and if that is the case don't initialize it again. Fixes: db8bcaad5393 ("net: lan966x: add the basic lan966x driver") Signed-off-by: Horatiu Vultur <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-05-23platform/x86/intel/ifs: Annotate work queue on stack so object debug does ↵David Arcari1-1/+1
not complain Object Debug results in the following warning while attempting to load ifs firmware: [ 220.007422] ODEBUG: object 000000003bf952db is on stack 00000000e843994b, but NOT annotated. [ 220.007459] ------------[ cut here ]------------ [ 220.007461] WARNING: CPU: 0 PID: 11774 at lib/debugobjects.c:548 __debug_object_init.cold+0x22e/0x2d5 [ 220.137476] RIP: 0010:__debug_object_init.cold+0x22e/0x2d5 [ 220.254774] Call Trace: [ 220.257641] <TASK> [ 220.265606] scan_chunks_sanity_check+0x368/0x5f0 [intel_ifs] [ 220.288292] ifs_load_firmware+0x2a3/0x400 [intel_ifs] [ 220.332793] current_batch_store+0xea/0x160 [intel_ifs] [ 220.357947] kernfs_fop_write_iter+0x355/0x530 [ 220.363048] new_sync_write+0x28e/0x4a0 [ 220.381226] vfs_write+0x62a/0x920 [ 220.385160] ksys_write+0xf9/0x1d0 [ 220.399421] do_syscall_64+0x59/0x90 [ 220.440635] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 220.566845] ---[ end trace 3a01b299db142b41 ]--- Correct this by calling INIT_WORK_ONSTACK instead of INIT_WORK. Fixes: 684ec215706d ("platform/x86/intel/ifs: Authenticate and copy to secured memory") Signed-off-by: David Arcari <[email protected]> Cc: Jithu Joseph <[email protected]> Cc: Ashok Raj <[email protected]> Cc: Tony Luck <[email protected]> Cc: Hans de Goede <[email protected]> Cc: Mark Gross <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Dan Williams <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]>
2023-05-23platform/x86: ISST: Remove 8 socket limitSteve Wahl1-7/+5
Stop restricting the PCI search to a range of PCI domains fed to pci_get_domain_bus_and_slot(). Instead, use for_each_pci_dev() and look at all PCI domains in one pass. On systems with more than 8 sockets, this avoids error messages like "Information: Invalid level, Can't get TDP control information at specified levels on cpu 480" from the intel speed select utility. Fixes: aa2ddd242572 ("platform/x86: ISST: Use numa node id for cpu pci dev mapping") Signed-off-by: Steve Wahl <[email protected]> Reviewed-by: Ilpo Järvinen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Hans de Goede <[email protected]>
2023-05-23gpio-f7188x: fix chip name and pin count on Nuvoton chipHenning Schild2-15/+15
In fact the device with chip id 0xD283 is called NCT6126D, and that is the chip id the Nuvoton code was written for. Correct that name to avoid confusion, because a NCT6116D in fact exists as well but has another chip id, and is currently not supported. The look at the spec also revealed that GPIO group7 in fact has 8 pins, so correct the pin count in that group as well. Fixes: d0918a84aff0 ("gpio-f7188x: Add GPIO support for Nuvoton NCT6116") Reported-by: Xing Tong Wu <[email protected]> Signed-off-by: Henning Schild <[email protected]> Acked-by: Simon Guinot <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
2023-05-23iommu/amd/pgtbl_v2: Fix domain max addressVasant Hegde1-1/+10
IOMMU v2 page table supports 4 level (47 bit) or 5 level (56 bit) virtual address space. Current code assumes it can support 64bit IOVA address space. If IOVA allocator allocates virtual address > 47/56 bit (depending on page table level) then it will do wrong mapping and cause invalid translation. Hence adjust aperture size to use max address supported by the page table. Reported-by: Jerry Snitselaar <[email protected]> Fixes: aaac38f61487 ("iommu/amd: Initial support for AMD IOMMU v2 page table") Cc: <[email protected]> # v6.0+ Cc: Suravee Suthikulpanit <[email protected]> Signed-off-by: Vasant Hegde <[email protected]> Reviewed-by: Jerry Snitselaar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2023-05-22net/mlx5: Fix indexing of mlx5_irqShay Drory1-4/+5
After the cited patch, mlx5_irq xarray index can be different then mlx5_irq MSIX table index. Fix it by storing both mlx5_irq xarray index and MSIX table index. Fixes: 3354822cde5a ("net/mlx5: Use dynamic msix vectors allocation") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Eli Cohen <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-22net/mlx5: Fix irq affinity managementShay Drory1-1/+1
The cited patch deny the user of changing the affinity of mlx5 irqs, which break backward compatibility. Hence, allow the user to change the affinity of mlx5 irqs. Fixes: bbac70c74183 ("net/mlx5: Use newer affinity descriptor") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Eli Cohen <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-22net/mlx5: Free irqs only on shutdown callbackShay Drory3-1/+31
Whenever a shutdown is invoked, free irqs only and keep mlx5_irq synthetic wrapper intact in order to avoid use-after-free on system shutdown. for example: ================================================================== BUG: KASAN: use-after-free in _find_first_bit+0x66/0x80 Read of size 8 at addr ffff88823fc0d318 by task kworker/u192:0/13608 CPU: 25 PID: 13608 Comm: kworker/u192:0 Tainted: G B W O 6.1.21-cloudflare-kasan-2023.3.21 #1 Hardware name: GIGABYTE R162-R2-GEN0/MZ12-HD2-CD, BIOS R14 05/03/2021 Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x34/0x48 print_report+0x170/0x473 ? _find_first_bit+0x66/0x80 kasan_report+0xad/0x130 ? _find_first_bit+0x66/0x80 _find_first_bit+0x66/0x80 mlx5e_open_channels+0x3c5/0x3a10 [mlx5_core] ? console_unlock+0x2fa/0x430 ? _raw_spin_lock_irqsave+0x8d/0xf0 ? _raw_spin_unlock_irqrestore+0x42/0x80 ? preempt_count_add+0x7d/0x150 ? __wake_up_klogd.part.0+0x7d/0xc0 ? vprintk_emit+0xfe/0x2c0 ? mlx5e_trigger_napi_sched+0x40/0x40 [mlx5_core] ? dev_attr_show.cold+0x35/0x35 ? devlink_health_do_dump.part.0+0x174/0x340 ? devlink_health_report+0x504/0x810 ? mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core] ? mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core] ? process_one_work+0x680/0x1050 mlx5e_safe_switch_params+0x156/0x220 [mlx5_core] ? mlx5e_switch_priv_channels+0x310/0x310 [mlx5_core] ? mlx5_eq_poll_irq_disabled+0xb6/0x100 [mlx5_core] mlx5e_tx_reporter_timeout_recover+0x123/0x240 [mlx5_core] ? __mutex_unlock_slowpath.constprop.0+0x2b0/0x2b0 devlink_health_reporter_recover+0xa6/0x1f0 devlink_health_report+0x2f7/0x810 ? vsnprintf+0x854/0x15e0 mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core] ? mlx5e_reporter_tx_err_cqe+0x1a0/0x1a0 [mlx5_core] ? mlx5e_tx_reporter_timeout_dump+0x50/0x50 [mlx5_core] ? mlx5e_tx_reporter_dump_sq+0x260/0x260 [mlx5_core] ? newidle_balance+0x9b7/0xe30 ? psi_group_change+0x6a7/0xb80 ? mutex_lock+0x96/0xf0 ? __mutex_lock_slowpath+0x10/0x10 mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core] process_one_work+0x680/0x1050 worker_thread+0x5a0/0xeb0 ? process_one_work+0x1050/0x1050 kthread+0x2a2/0x340 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> Freed by task 1: kasan_save_stack+0x23/0x50 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 ____kasan_slab_free+0x169/0x1d0 slab_free_freelist_hook+0xd2/0x190 __kmem_cache_free+0x1a1/0x2f0 irq_pool_free+0x138/0x200 [mlx5_core] mlx5_irq_table_destroy+0xf6/0x170 [mlx5_core] mlx5_core_eq_free_irqs+0x74/0xf0 [mlx5_core] shutdown+0x194/0x1aa [mlx5_core] pci_device_shutdown+0x75/0x120 device_shutdown+0x35c/0x620 kernel_restart+0x60/0xa0 __do_sys_reboot+0x1cb/0x2c0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x4b/0xb5 The buggy address belongs to the object at ffff88823fc0d300 which belongs to the cache kmalloc-192 of size 192 The buggy address is located 24 bytes inside of 192-byte region [ffff88823fc0d300, ffff88823fc0d3c0) The buggy address belongs to the physical page: page:0000000010139587 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x23fc0c head:0000000010139587 order:1 compound_mapcount:0 compound_pincount:0 flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff) raw: 002ffff800010200 0000000000000000 dead000000000122 ffff88810004ca00 raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88823fc0d200: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88823fc0d280: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc >ffff88823fc0d300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88823fc0d380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff88823fc0d400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== general protection fault, probably for non-canonical address 0xdffffc005c40d7ac: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: probably user-memory-access in range [0x00000002e206bd60-0x00000002e206bd67] CPU: 25 PID: 13608 Comm: kworker/u192:0 Tainted: G B W O 6.1.21-cloudflare-kasan-2023.3.21 #1 Hardware name: GIGABYTE R162-R2-GEN0/MZ12-HD2-CD, BIOS R14 05/03/2021 Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core] RIP: 0010:__alloc_pages+0x141/0x5c0 Call Trace: <TASK> ? sysvec_apic_timer_interrupt+0xa0/0xc0 ? asm_sysvec_apic_timer_interrupt+0x16/0x20 ? __alloc_pages_slowpath.constprop.0+0x1ec0/0x1ec0 ? _raw_spin_unlock_irqrestore+0x3d/0x80 __kmalloc_large_node+0x80/0x120 ? kvmalloc_node+0x4e/0x170 __kmalloc_node+0xd4/0x150 kvmalloc_node+0x4e/0x170 mlx5e_open_channels+0x631/0x3a10 [mlx5_core] ? console_unlock+0x2fa/0x430 ? _raw_spin_lock_irqsave+0x8d/0xf0 ? _raw_spin_unlock_irqrestore+0x42/0x80 ? preempt_count_add+0x7d/0x150 ? __wake_up_klogd.part.0+0x7d/0xc0 ? vprintk_emit+0xfe/0x2c0 ? mlx5e_trigger_napi_sched+0x40/0x40 [mlx5_core] ? dev_attr_show.cold+0x35/0x35 ? devlink_health_do_dump.part.0+0x174/0x340 ? devlink_health_report+0x504/0x810 ? mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core] ? mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core] ? process_one_work+0x680/0x1050 mlx5e_safe_switch_params+0x156/0x220 [mlx5_core] ? mlx5e_switch_priv_channels+0x310/0x310 [mlx5_core] ? mlx5_eq_poll_irq_disabled+0xb6/0x100 [mlx5_core] mlx5e_tx_reporter_timeout_recover+0x123/0x240 [mlx5_core] ? __mutex_unlock_slowpath.constprop.0+0x2b0/0x2b0 devlink_health_reporter_recover+0xa6/0x1f0 devlink_health_report+0x2f7/0x810 ? vsnprintf+0x854/0x15e0 mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core] ? mlx5e_reporter_tx_err_cqe+0x1a0/0x1a0 [mlx5_core] ? mlx5e_tx_reporter_timeout_dump+0x50/0x50 [mlx5_core] ? mlx5e_tx_reporter_dump_sq+0x260/0x260 [mlx5_core] ? newidle_balance+0x9b7/0xe30 ? psi_group_change+0x6a7/0xb80 ? mutex_lock+0x96/0xf0 ? __mutex_lock_slowpath+0x10/0x10 mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core] process_one_work+0x680/0x1050 worker_thread+0x5a0/0xeb0 ? process_one_work+0x1050/0x1050 kthread+0x2a2/0x340 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> ---[ end trace 0000000000000000 ]--- RIP: 0010:__alloc_pages+0x141/0x5c0 Code: e0 39 a3 96 89 e9 b8 22 01 32 01 83 e1 0f 48 89 fa 01 c9 48 c1 ea 03 d3 f8 83 e0 03 89 44 24 6c 48 b8 00 00 00 00 00 fc ff df <80> 3c 02 00 0f 85 fc 03 00 00 89 e8 4a 8b 14 f5 e0 39 a3 96 4c 89 RSP: 0018:ffff888251f0f438 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 1ffff1104a3e1e8b RCX: 0000000000000000 RDX: 000000005c40d7ac RSI: 0000000000000003 RDI: 00000002e206bd60 RBP: 0000000000052dc0 R08: ffff8882b0044218 R09: ffff8882b0045e8a R10: fffffbfff300fefc R11: ffff888167af4000 R12: 0000000000000003 R13: 0000000000000000 R14: 00000000696c7070 R15: ffff8882373f4380 FS: 0000000000000000(0000) GS:ffff88bf2be80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005641d031eee8 CR3: 0000002e7ca14000 CR4: 0000000000350ee0 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x11000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]---] Reported-by: Frederick Lawler <[email protected]> Link: https://lore.kernel.org/netdev/[email protected] Signed-off-by: Shay Drory <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-22net/mlx5: Devcom, serialize devcom registrationShay Drory1-5/+14
From one hand, mlx5 driver is allowing to probe PFs in parallel. From the other hand, devcom, which is a share resource between PFs, is registered without any lock. This might resulted in memory problems. Hence, use the global mlx5_dev_list_lock in order to serialize devcom registration. Fixes: fadd59fc50d0 ("net/mlx5: Introduce inter-device communication mechanism") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Mark Bloch <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-22net/mlx5: Devcom, fix error flow in mlx5_devcom_register_deviceShay Drory1-1/+2
In case devcom allocation is failed, mlx5 is always freeing the priv. However, this priv might have been allocated by a different thread, and freeing it might lead to use-after-free bugs. Fix it by freeing the priv only in case it was allocated by the running thread. Fixes: fadd59fc50d0 ("net/mlx5: Introduce inter-device communication mechanism") Signed-off-by: Shay Drory <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-22net/mlx5: E-switch, Devcom, sync devcom events and devcom comp registerShay Drory2-1/+9
devcom events are sent to all registered component. Following the cited patch, it is possible for two components, e.g.: two eswitches, to send devcom events, while both components are registered. This means eswitch layer will do double un/pairing, which is double allocation and free of resources, even though only one un/pairing is needed. flow example: cpu0 cpu1 ---- ---- mlx5_devlink_eswitch_mode_set(dev0) esw_offloads_devcom_init() mlx5_devcom_register_component(esw0) mlx5_devlink_eswitch_mode_set(dev1) esw_offloads_devcom_init() mlx5_devcom_register_component(esw1) mlx5_devcom_send_event() mlx5_devcom_send_event() Hence, check whether the eswitches are already un/paired before free/allocation of resources. Fixes: 09b278462f16 ("net: devlink: enable parallel ops on netlink interface") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Mark Bloch <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-22net/mlx5e: TC, Fix using eswitch mapping in nic modePaul Blakey1-7/+27
Cited patch is using the eswitch object mapping pool while in nic mode where it isn't initialized. This results in the trace below [0]. Fix that by using either nic or eswitch object mapping pool depending if eswitch is enabled or not. [0]: [ 826.446057] ================================================================== [ 826.446729] BUG: KASAN: slab-use-after-free in mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.447515] Read of size 8 at addr ffff888194485830 by task tc/6233 [ 826.448243] CPU: 16 PID: 6233 Comm: tc Tainted: G W 6.3.0-rc6+ #1 [ 826.448890] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 826.449785] Call Trace: [ 826.450052] <TASK> [ 826.450302] dump_stack_lvl+0x33/0x50 [ 826.450650] print_report+0xc2/0x610 [ 826.450998] ? __virt_addr_valid+0xb1/0x130 [ 826.451385] ? mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.451935] kasan_report+0xae/0xe0 [ 826.452276] ? mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.452829] mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.453368] ? __kmalloc_node+0x5a/0x120 [ 826.453733] esw_add_restore_rule+0x20f/0x270 [mlx5_core] [ 826.454288] ? mlx5_eswitch_add_send_to_vport_meta_rule+0x260/0x260 [mlx5_core] [ 826.455011] ? mutex_unlock+0x80/0xd0 [ 826.455361] ? __mutex_unlock_slowpath.constprop.0+0x210/0x210 [ 826.455862] ? mapping_add+0x2cb/0x440 [mlx5_core] [ 826.456425] mlx5e_tc_action_miss_mapping_get+0x139/0x180 [mlx5_core] [ 826.457058] ? mlx5e_tc_update_skb_nic+0xb0/0xb0 [mlx5_core] [ 826.457636] ? __kasan_kmalloc+0x77/0x90 [ 826.458000] ? __kmalloc+0x57/0x120 [ 826.458336] mlx5_tc_ct_flow_offload+0x325/0xe40 [mlx5_core] [ 826.458916] ? ct_kernel_enter.constprop.0+0x48/0xa0 [ 826.459360] ? mlx5_tc_ct_parse_action+0xf0/0xf0 [mlx5_core] [ 826.459933] ? mlx5e_mod_hdr_attach+0x491/0x520 [mlx5_core] [ 826.460507] ? mlx5e_mod_hdr_get+0x12/0x20 [mlx5_core] [ 826.461046] ? mlx5e_tc_attach_mod_hdr+0x154/0x170 [mlx5_core] [ 826.461635] mlx5e_configure_flower+0x969/0x2110 [mlx5_core] [ 826.462217] ? _raw_spin_lock_bh+0x85/0xe0 [ 826.462597] ? __mlx5e_add_fdb_flow+0x750/0x750 [mlx5_core] [ 826.463163] ? kasan_save_stack+0x2e/0x40 [ 826.463534] ? down_read+0x115/0x1b0 [ 826.463878] ? down_write_killable+0x110/0x110 [ 826.464288] ? tc_setup_action.part.0+0x9f/0x3b0 [ 826.464701] ? mlx5e_is_uplink_rep+0x4c/0x90 [mlx5_core] [ 826.465253] ? mlx5e_tc_reoffload_flows_work+0x130/0x130 [mlx5_core] [ 826.465878] tc_setup_cb_add+0x112/0x250 [ 826.466247] fl_hw_replace_filter+0x230/0x310 [cls_flower] [ 826.466724] ? fl_hw_destroy_filter+0x1a0/0x1a0 [cls_flower] [ 826.467212] fl_change+0x14e1/0x2030 [cls_flower] [ 826.467636] ? sock_def_readable+0x89/0x120 [ 826.468019] ? fl_tmplt_create+0x2d0/0x2d0 [cls_flower] [ 826.468509] ? kasan_unpoison+0x23/0x50 [ 826.468873] ? get_random_u16+0x180/0x180 [ 826.469244] ? __radix_tree_lookup+0x2b/0x130 [ 826.469640] ? fl_get+0x7b/0x140 [cls_flower] [ 826.470042] ? fl_mask_put+0x200/0x200 [cls_flower] [ 826.470478] ? __mutex_unlock_slowpath.constprop.0+0x210/0x210 [ 826.470973] ? fl_tmplt_create+0x2d0/0x2d0 [cls_flower] [ 826.471427] tc_new_tfilter+0x644/0x1050 [ 826.471795] ? tc_get_tfilter+0x860/0x860 [ 826.472170] ? __thaw_task+0x130/0x130 [ 826.472525] ? arch_stack_walk+0x98/0xf0 [ 826.472892] ? cap_capable+0x9f/0xd0 [ 826.473235] ? security_capable+0x47/0x60 [ 826.473608] rtnetlink_rcv_msg+0x1d5/0x550 [ 826.473985] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 826.474383] ? __stack_depot_save+0x35/0x4c0 [ 826.474779] ? kasan_save_stack+0x2e/0x40 [ 826.475149] ? kasan_save_stack+0x1e/0x40 [ 826.475518] ? __kasan_record_aux_stack+0x9f/0xb0 [ 826.475939] ? task_work_add+0x77/0x1c0 [ 826.476305] netlink_rcv_skb+0xe0/0x210 [ 826.476661] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 826.477057] ? netlink_ack+0x7c0/0x7c0 [ 826.477412] ? rhashtable_jhash2+0xef/0x150 [ 826.477796] ? _copy_from_iter+0x105/0x770 [ 826.484386] netlink_unicast+0x346/0x490 [ 826.484755] ? netlink_attachskb+0x400/0x400 [ 826.485145] ? kernel_text_address+0xc2/0xd0 [ 826.485535] netlink_sendmsg+0x3b0/0x6c0 [ 826.485902] ? kernel_text_address+0xc2/0xd0 [ 826.486296] ? netlink_unicast+0x490/0x490 [ 826.486671] ? iovec_from_user.part.0+0x7a/0x1a0 [ 826.487083] ? netlink_unicast+0x490/0x490 [ 826.487461] sock_sendmsg+0x73/0xc0 [ 826.487803] ____sys_sendmsg+0x364/0x380 [ 826.488186] ? import_iovec+0x7/0x10 [ 826.488531] ? kernel_sendmsg+0x30/0x30 [ 826.488893] ? __copy_msghdr+0x180/0x180 [ 826.489258] ? kasan_save_stack+0x2e/0x40 [ 826.489629] ? kasan_save_stack+0x1e/0x40 [ 826.490002] ? __kasan_record_aux_stack+0x9f/0xb0 [ 826.490424] ? __call_rcu_common.constprop.0+0x46/0x580 [ 826.490876] ___sys_sendmsg+0xdf/0x140 [ 826.491231] ? copy_msghdr_from_user+0x110/0x110 [ 826.491649] ? fget_raw+0x120/0x120 [ 826.491988] ? ___sys_recvmsg+0xd9/0x130 [ 826.492355] ? folio_batch_add_and_move+0x80/0xa0 [ 826.492776] ? _raw_spin_lock+0x7a/0xd0 [ 826.493137] ? _raw_spin_lock+0x7a/0xd0 [ 826.493500] ? _raw_read_lock_irq+0x30/0x30 [ 826.493880] ? kasan_set_track+0x21/0x30 [ 826.494249] ? kasan_save_free_info+0x2a/0x40 [ 826.494650] ? do_sys_openat2+0xff/0x270 [ 826.495016] ? __fget_light+0x1b5/0x200 [ 826.495377] ? __virt_addr_valid+0xb1/0x130 [ 826.495763] __sys_sendmsg+0xb2/0x130 [ 826.496118] ? __sys_sendmsg_sock+0x20/0x20 [ 826.496501] ? __x64_sys_rseq+0x2e0/0x2e0 [ 826.496874] ? do_user_addr_fault+0x276/0x820 [ 826.497273] ? fpregs_assert_state_consistent+0x52/0x60 [ 826.497727] ? exit_to_user_mode_prepare+0x30/0x120 [ 826.498158] do_syscall_64+0x3d/0x90 [ 826.498502] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 826.498949] RIP: 0033:0x7f9b67f4f887 [ 826.499294] Code: 0a 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 826.500742] RSP: 002b:00007fff5d1a5498 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 826.501395] RAX: ffffffffffffffda RBX: 0000000064413ce6 RCX: 00007f9b67f4f887 [ 826.501975] RDX: 0000000000000000 RSI: 00007fff5d1a5500 RDI: 0000000000000003 [ 826.502556] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 [ 826.503135] R10: 00007f9b67e08708 R11: 0000000000000246 R12: 0000000000000001 [ 826.503714] R13: 0000000000000001 R14: 00007fff5d1a9800 R15: 0000000000485400 [ 826.504304] </TASK> [ 826.504753] Allocated by task 3764: [ 826.505090] kasan_save_stack+0x1e/0x40 [ 826.505453] kasan_set_track+0x21/0x30 [ 826.505810] __kasan_kmalloc+0x77/0x90 [ 826.506164] __mlx5_create_flow_table+0x16d/0xbb0 [mlx5_core] [ 826.506742] esw_offloads_enable+0x60d/0xfb0 [mlx5_core] [ 826.507292] mlx5_eswitch_enable_locked+0x4d3/0x680 [mlx5_core] [ 826.507885] mlx5_devlink_eswitch_mode_set+0x2a3/0x580 [mlx5_core] [ 826.508513] devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0 [ 826.508969] genl_family_rcv_msg_doit.isra.0+0x146/0x1c0 [ 826.509427] genl_rcv_msg+0x28d/0x3e0 [ 826.509772] netlink_rcv_skb+0xe0/0x210 [ 826.510133] genl_rcv+0x24/0x40 [ 826.510448] netlink_unicast+0x346/0x490 [ 826.510810] netlink_sendmsg+0x3b0/0x6c0 [ 826.511179] sock_sendmsg+0x73/0xc0 [ 826.511519] __sys_sendto+0x18d/0x220 [ 826.511867] __x64_sys_sendto+0x72/0x80 [ 826.512232] do_syscall_64+0x3d/0x90 [ 826.512576] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 826.513220] Freed by task 5674: [ 826.513535] kasan_save_stack+0x1e/0x40 [ 826.513893] kasan_set_track+0x21/0x30 [ 826.514245] kasan_save_free_info+0x2a/0x40 [ 826.514629] ____kasan_slab_free+0x11a/0x1b0 [ 826.515021] __kmem_cache_free+0x14d/0x280 [ 826.515399] tree_put_node+0x109/0x1c0 [mlx5_core] [ 826.515907] mlx5_destroy_flow_table+0x119/0x630 [mlx5_core] [ 826.516481] esw_offloads_steering_cleanup+0xe7/0x150 [mlx5_core] [ 826.517084] esw_offloads_disable+0xe0/0x160 [mlx5_core] [ 826.517632] mlx5_eswitch_disable_locked+0x26c/0x290 [mlx5_core] [ 826.518225] mlx5_devlink_eswitch_mode_set+0x128/0x580 [mlx5_core] [ 826.518834] devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0 [ 826.519286] genl_family_rcv_msg_doit.isra.0+0x146/0x1c0 [ 826.519748] genl_rcv_msg+0x28d/0x3e0 [ 826.520101] netlink_rcv_skb+0xe0/0x210 [ 826.520458] genl_rcv+0x24/0x40 [ 826.520771] netlink_unicast+0x346/0x490 [ 826.521137] netlink_sendmsg+0x3b0/0x6c0 [ 826.521505] sock_sendmsg+0x73/0xc0 [ 826.521842] __sys_sendto+0x18d/0x220 [ 826.522191] __x64_sys_sendto+0x72/0x80 [ 826.522554] do_syscall_64+0x3d/0x90 [ 826.522894] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 826.523540] Last potentially related work creation: [ 826.523969] kasan_save_stack+0x1e/0x40 [ 826.524331] __kasan_record_aux_stack+0x9f/0xb0 [ 826.524739] insert_work+0x30/0x130 [ 826.525078] __queue_work+0x34b/0x690 [ 826.525426] queue_work_on+0x48/0x50 [ 826.525766] __rhashtable_remove_fast_one+0x4af/0x4d0 [mlx5_core] [ 826.526365] del_sw_flow_group+0x1b5/0x270 [mlx5_core] [ 826.526898] tree_put_node+0x109/0x1c0 [mlx5_core] [ 826.527407] esw_offloads_steering_cleanup+0xd3/0x150 [mlx5_core] [ 826.528009] esw_offloads_disable+0xe0/0x160 [mlx5_core] [ 826.528616] mlx5_eswitch_disable_locked+0x26c/0x290 [mlx5_core] [ 826.529218] mlx5_devlink_eswitch_mode_set+0x128/0x580 [mlx5_core] [ 826.529823] devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0 [ 826.530276] genl_family_rcv_msg_doit.isra.0+0x146/0x1c0 [ 826.530733] genl_rcv_msg+0x28d/0x3e0 [ 826.531079] netlink_rcv_skb+0xe0/0x210 [ 826.531439] genl_rcv+0x24/0x40 [ 826.531755] netlink_unicast+0x346/0x490 [ 826.532123] netlink_sendmsg+0x3b0/0x6c0 [ 826.532487] sock_sendmsg+0x73/0xc0 [ 826.532825] __sys_sendto+0x18d/0x220 [ 826.533175] __x64_sys_sendto+0x72/0x80 [ 826.533533] do_syscall_64+0x3d/0x90 [ 826.533877] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 826.534521] The buggy address belongs to the object at ffff888194485800 which belongs to the cache kmalloc-512 of size 512 [ 826.535506] The buggy address is located 48 bytes inside of freed 512-byte region [ffff888194485800, ffff888194485a00) [ 826.536666] The buggy address belongs to the physical page: [ 826.537138] page:00000000d75841dd refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x194480 [ 826.537915] head:00000000d75841dd order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 826.538595] flags: 0x200000000010200(slab|head|node=0|zone=2) [ 826.539089] raw: 0200000000010200 ffff888100042c80 ffffea0004523800 dead000000000002 [ 826.539755] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 [ 826.540417] page dumped because: kasan: bad access detected [ 826.541095] Memory state around the buggy address: [ 826.541519] ffff888194485700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 826.542149] ffff888194485780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 826.542773] >ffff888194485800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 826.543400] ^ [ 826.543822] ffff888194485880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 826.544452] ffff888194485900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 826.545079] ================================================================== Fixes: 6702782845a5 ("net/mlx5e: TC, Set CT miss to the specific ct action instance") Signed-off-by: Paul Blakey <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-22net/mlx5e: Fix SQ wake logic in ptp napi_poll contextRahul Rameshbabu3-7/+16
Check in the mlx5e_ptp_poll_ts_cq context if the ptp tx sq should be woken up. Before change, the ptp tx sq may never wake up if the ptp tx ts skb fifo is full when mlx5e_poll_tx_cq checks if the queue should be woken up. Fixes: 1880bc4e4a96 ("net/mlx5e: Add TX port timestamp support") Signed-off-by: Rahul Rameshbabu <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-22net/mlx5e: Fix deadlock in tc route query codeVlad Buslov3-20/+48
Cited commit causes ABBA deadlock[0] when peer flows are created while holding the devcom rw semaphore. Due to peer flows offload implementation the lock is taken much higher up the call chain and there is no obvious way to easily fix the deadlock. Instead, since tc route query code needs the peer eswitch structure only to perform a lookup in xarray and doesn't perform any sleeping operations with it, refactor the code for lockless execution in following ways: - RCUify the devcom 'data' pointer. When resetting the pointer synchronously wait for RCU grace period before returning. This is fine since devcom is currently only used for synchronization of pairing/unpairing of eswitches which is rare and already expensive as-is. - Wrap all usages of 'paired' boolean in {READ|WRITE}_ONCE(). The flag has already been used in some unlocked contexts without proper annotations (e.g. users of mlx5_devcom_is_paired() function), but it wasn't an issue since all relevant code paths checked it again after obtaining the devcom semaphore. Now it is also used by mlx5_devcom_get_peer_data_rcu() as "best effort" check to return NULL when devcom is being unpaired. Note that while RCU read lock doesn't prevent the unpaired flag from being changed concurrently it still guarantees that reader can continue to use 'data'. - Refactor mlx5e_tc_query_route_vport() function to use new mlx5_devcom_get_peer_data_rcu() API which fixes the deadlock. [0]: [ 164.599612] ====================================================== [ 164.600142] WARNING: possible circular locking dependency detected [ 164.600667] 6.3.0-rc3+ #1 Not tainted [ 164.601021] ------------------------------------------------------ [ 164.601557] handler1/3456 is trying to acquire lock: [ 164.601998] ffff88811f1714b0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}, at: mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.603078] but task is already holding lock: [ 164.603617] ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.604459] which lock already depends on the new lock. [ 164.605190] the existing dependency chain (in reverse order) is: [ 164.605848] -> #1 (&comp->sem){++++}-{3:3}: [ 164.606380] down_read+0x39/0x50 [ 164.606772] mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.607336] mlx5e_tc_query_route_vport+0x86/0xc0 [mlx5_core] [ 164.607914] mlx5e_tc_tun_route_lookup+0x1a4/0x1d0 [mlx5_core] [ 164.608495] mlx5e_attach_decap_route+0xc6/0x1e0 [mlx5_core] [ 164.609063] mlx5e_tc_add_fdb_flow+0x1ea/0x360 [mlx5_core] [ 164.609627] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.610175] mlx5e_configure_flower+0x952/0x1a20 [mlx5_core] [ 164.610741] tc_setup_cb_add+0xd4/0x200 [ 164.611146] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.611661] fl_change+0xc95/0x18a0 [cls_flower] [ 164.612116] tc_new_tfilter+0x3fc/0xd20 [ 164.612516] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.612936] netlink_rcv_skb+0x54/0x100 [ 164.613339] netlink_unicast+0x190/0x250 [ 164.613746] netlink_sendmsg+0x245/0x4a0 [ 164.614150] sock_sendmsg+0x38/0x60 [ 164.614522] ____sys_sendmsg+0x1d0/0x1e0 [ 164.614934] ___sys_sendmsg+0x80/0xc0 [ 164.615320] __sys_sendmsg+0x51/0x90 [ 164.615701] do_syscall_64+0x3d/0x90 [ 164.616083] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.616568] -> #0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}: [ 164.617210] __lock_acquire+0x159e/0x26e0 [ 164.617638] lock_acquire+0xc2/0x2a0 [ 164.618018] __mutex_lock+0x92/0xcd0 [ 164.618401] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.618943] post_process_attr+0x153/0x2d0 [mlx5_core] [ 164.619471] mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core] [ 164.620021] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.620564] mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core] [ 164.621125] tc_setup_cb_add+0xd4/0x200 [ 164.621531] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.622047] fl_change+0xc95/0x18a0 [cls_flower] [ 164.622500] tc_new_tfilter+0x3fc/0xd20 [ 164.622906] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.623324] netlink_rcv_skb+0x54/0x100 [ 164.623727] netlink_unicast+0x190/0x250 [ 164.624138] netlink_sendmsg+0x245/0x4a0 [ 164.624544] sock_sendmsg+0x38/0x60 [ 164.624919] ____sys_sendmsg+0x1d0/0x1e0 [ 164.625340] ___sys_sendmsg+0x80/0xc0 [ 164.625731] __sys_sendmsg+0x51/0x90 [ 164.626117] do_syscall_64+0x3d/0x90 [ 164.626502] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.626995] other info that might help us debug this: [ 164.627725] Possible unsafe locking scenario: [ 164.628268] CPU0 CPU1 [ 164.628683] ---- ---- [ 164.629098] lock(&comp->sem); [ 164.629421] lock(&esw->offloads.encap_tbl_lock); [ 164.630066] lock(&comp->sem); [ 164.630555] lock(&esw->offloads.encap_tbl_lock); [ 164.630993] *** DEADLOCK *** [ 164.631575] 3 locks held by handler1/3456: [ 164.631962] #0: ffff888124b75130 (&block->cb_lock){++++}-{3:3}, at: tc_setup_cb_add+0x5b/0x200 [ 164.632703] #1: ffff888116e512b8 (&esw->mode_lock){++++}-{3:3}, at: mlx5_esw_hold+0x39/0x50 [mlx5_core] [ 164.633552] #2: ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.634435] stack backtrace: [ 164.634883] CPU: 17 PID: 3456 Comm: handler1 Not tainted 6.3.0-rc3+ #1 [ 164.635431] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 164.636340] Call Trace: [ 164.636616] <TASK> [ 164.636863] dump_stack_lvl+0x47/0x70 [ 164.637217] check_noncircular+0xfe/0x110 [ 164.637601] __lock_acquire+0x159e/0x26e0 [ 164.637977] ? mlx5_cmd_set_fte+0x5b0/0x830 [mlx5_core] [ 164.638472] lock_acquire+0xc2/0x2a0 [ 164.638828] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.639339] ? lock_is_held_type+0x98/0x110 [ 164.639728] __mutex_lock+0x92/0xcd0 [ 164.640074] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.640576] ? __lock_acquire+0x382/0x26e0 [ 164.640958] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.641468] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.641965] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.642454] ? lock_release+0xbf/0x240 [ 164.642819] post_process_attr+0x153/0x2d0 [mlx5_core] [ 164.643318] mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core] [ 164.643835] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.644340] mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core] [ 164.644862] ? lock_acquire+0xc2/0x2a0 [ 164.645219] tc_setup_cb_add+0xd4/0x200 [ 164.645588] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.646067] fl_change+0xc95/0x18a0 [cls_flower] [ 164.646488] tc_new_tfilter+0x3fc/0xd20 [ 164.646861] ? tc_del_tfilter+0x810/0x810 [ 164.647236] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.647621] ? rtnl_setlink+0x160/0x160 [ 164.647982] netlink_rcv_skb+0x54/0x100 [ 164.648348] netlink_unicast+0x190/0x250 [ 164.648722] netlink_sendmsg+0x245/0x4a0 [ 164.649090] sock_sendmsg+0x38/0x60 [ 164.649434] ____sys_sendmsg+0x1d0/0x1e0 [ 164.649804] ? copy_msghdr_from_user+0x6d/0xa0 [ 164.650213] ___sys_sendmsg+0x80/0xc0 [ 164.650563] ? lock_acquire+0xc2/0x2a0 [ 164.650926] ? lock_acquire+0xc2/0x2a0 [ 164.651286] ? __fget_files+0x5/0x190 [ 164.651644] ? find_held_lock+0x2b/0x80 [ 164.652006] ? __fget_files+0xb9/0x190 [ 164.652365] ? lock_release+0xbf/0x240 [ 164.652723] ? __fget_files+0xd3/0x190 [ 164.653079] __sys_sendmsg+0x51/0x90 [ 164.653435] do_syscall_64+0x3d/0x90 [ 164.653784] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.654229] RIP: 0033:0x7f378054f8bd [ 164.654577] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 6a c3 f4 ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 be c3 f4 ff 48 [ 164.656041] RSP: 002b:00007f377fa114b0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 164.656701] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f378054f8bd [ 164.657297] RDX: 0000000000000000 RSI: 00007f377fa11540 RDI: 0000000000000014 [ 164.657885] RBP: 00007f377fa12278 R08: 0000000000000000 R09: 000000000000015c [ 164.658472] R10: 00007f377fa123d0 R11: 0000000000000293 R12: 0000560962d99bd0 [ 164.665317] R13: 0000000000000000 R14: 0000560962d99bd0 R15: 00007f377fa11540 Fixes: f9d196bd632b ("net/mlx5e: Use correct eswitch for stack devices with lag") Signed-off-by: Vlad Buslov <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Shay Drory <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-22net/mlx5: Fix error message when failing to allocate device memoryRoi Dayan1-1/+1
Fix spacing for the error and also the correct error code pointer. Fixes: c9b9dcb430b3 ("net/mlx5: Move device memory management to mlx5_core") Signed-off-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-22net/mlx5e: Use correct encap attribute during invalidationVlad Buslov1-1/+3
With introduction of post action infrastructure most of the users of encap attribute had been modified in order to obtain the correct attribute by calling mlx5e_tc_get_encap_attr() helper instead of assuming encap action is always on default attribute. However, the cited commit didn't modify mlx5e_invalidate_encap() which prevents it from destroying correct modify header action which leads to a warning [0]. Fix the issue by using correct attribute. [0]: Feb 21 09:47:35 c-237-177-40-045 kernel: WARNING: CPU: 17 PID: 654 at drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:684 mlx5e_tc_attach_mod_hdr+0x1cc/0x230 [mlx5_core] Feb 21 09:47:35 c-237-177-40-045 kernel: RIP: 0010:mlx5e_tc_attach_mod_hdr+0x1cc/0x230 [mlx5_core] Feb 21 09:47:35 c-237-177-40-045 kernel: Call Trace: Feb 21 09:47:35 c-237-177-40-045 kernel: <TASK> Feb 21 09:47:35 c-237-177-40-045 kernel: mlx5e_tc_fib_event_work+0x8e3/0x1f60 [mlx5_core] Feb 21 09:47:35 c-237-177-40-045 kernel: ? mlx5e_take_all_encap_flows+0xe0/0xe0 [mlx5_core] Feb 21 09:47:35 c-237-177-40-045 kernel: ? lock_downgrade+0x6d0/0x6d0 Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x273/0x3f0 Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x273/0x3f0 Feb 21 09:47:35 c-237-177-40-045 kernel: process_one_work+0x7c2/0x1310 Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x3f0/0x3f0 Feb 21 09:47:35 c-237-177-40-045 kernel: ? pwq_dec_nr_in_flight+0x230/0x230 Feb 21 09:47:35 c-237-177-40-045 kernel: ? rwlock_bug.part.0+0x90/0x90 Feb 21 09:47:35 c-237-177-40-045 kernel: worker_thread+0x59d/0xec0 Feb 21 09:47:35 c-237-177-40-045 kernel: ? __kthread_parkme+0xd9/0x1d0 Fixes: 8300f225268b ("net/mlx5e: Create new flow attr for multi table actions") Signed-off-by: Vlad Buslov <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-22net/mlx5: DR, Check force-loopback RC QP capability independently from RoCEYevgeny Kliteynik1-1/+3
SW Steering uses RC QP for writing STEs to ICM. This writingis done in LB (loopback), and FL (force-loopback) QP is preferred for performance. FL is available when RoCE is enabled or disabled based on RoCE caps. This patch adds reading of FL capability from HCA caps in addition to the existing reading from RoCE caps, thus fixing the case where we didn't have loopback enabled when RoCE was disabled. Fixes: 7304d603a57a ("net/mlx5: DR, Add support for force-loopback QP") Signed-off-by: Itamar Gozlan <[email protected]> Signed-off-by: Yevgeny Kliteynik <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-22net/mlx5: DR, Fix crc32 calculation to work on big-endian (BE) CPUsErez Shitrit1-1/+2
When calculating crc for hash index we use the function crc32 that calculates for little-endian (LE) arch. Then we convert it to network endianness using htonl(), but it's wrong to do the conversion in BE archs since the crc32 value is already LE. The solution is to switch the bytes from the crc result for all types of arc. Fixes: 40416d8ede65 ("net/mlx5: DR, Replace CRC32 implementation to use kernel lib") Signed-off-by: Erez Shitrit <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-22net/mlx5: Handle pairing of E-switch via uplink un/load APIsShay Drory3-6/+9
In case user switch a device from switchdev mode to legacy mode, mlx5 first unpair the E-switch and afterwards unload the uplink vport. From the other hand, in case user remove or reload a device, mlx5 first unload the uplink vport and afterwards unpair the E-switch. The latter is causing a bug[1], hence, handle pairing of E-switch as part of uplink un/load APIs. [1] In case VF_LAG is used, every tc fdb flow is duplicated to the peer esw. However, the original esw keeps a pointer to this duplicated flow, not the peer esw. e.g.: if user create tc fdb flow over esw0, the flow is duplicated over esw1, in FW/HW, but in SW, esw0 keeps a pointer to the duplicated flow. During module unload while a peer tc fdb flow is still offloaded, in case the first device to be removed is the peer device (esw1 in the example above), the peer net-dev is destroyed, and so the mlx5e_priv is memset to 0. Afterwards, the peer device is trying to unpair himself from the original device (esw0 in the example above). Unpair API invoke the original device to clear peer flow from its eswitch (esw0), but the peer flow, which is stored over the original eswitch (esw0), is trying to use the peer mlx5e_priv, which is memset to 0 and result in bellow kernel-oops. [ 157.964081 ] BUG: unable to handle page fault for address: 000000000002ce60 [ 157.964662 ] #PF: supervisor read access in kernel mode [ 157.965123 ] #PF: error_code(0x0000) - not-present page [ 157.965582 ] PGD 0 P4D 0 [ 157.965866 ] Oops: 0000 [#1] SMP [ 157.967670 ] RIP: 0010:mlx5e_tc_del_fdb_flow+0x48/0x460 [mlx5_core] [ 157.976164 ] Call Trace: [ 157.976437 ] <TASK> [ 157.976690 ] __mlx5e_tc_del_fdb_peer_flow+0xe6/0x100 [mlx5_core] [ 157.977230 ] mlx5e_tc_clean_fdb_peer_flows+0x67/0x90 [mlx5_core] [ 157.977767 ] mlx5_esw_offloads_unpair+0x2d/0x1e0 [mlx5_core] [ 157.984653 ] mlx5_esw_offloads_devcom_event+0xbf/0x130 [mlx5_core] [ 157.985212 ] mlx5_devcom_send_event+0xa3/0xb0 [mlx5_core] [ 157.985714 ] esw_offloads_disable+0x5a/0x110 [mlx5_core] [ 157.986209 ] mlx5_eswitch_disable_locked+0x152/0x170 [mlx5_core] [ 157.986757 ] mlx5_eswitch_disable+0x51/0x80 [mlx5_core] [ 157.987248 ] mlx5_unload+0x2a/0xb0 [mlx5_core] [ 157.987678 ] mlx5_uninit_one+0x5f/0xd0 [mlx5_core] [ 157.988127 ] remove_one+0x64/0xe0 [mlx5_core] [ 157.988549 ] pci_device_remove+0x31/0xa0 [ 157.988933 ] device_release_driver_internal+0x18f/0x1f0 [ 157.989402 ] driver_detach+0x3f/0x80 [ 157.989754 ] bus_remove_driver+0x70/0xf0 [ 157.990129 ] pci_unregister_driver+0x34/0x90 [ 157.990537 ] mlx5_cleanup+0xc/0x1c [mlx5_core] [ 157.990972 ] __x64_sys_delete_module+0x15a/0x250 [ 157.991398 ] ? exit_to_user_mode_prepare+0xea/0x110 [ 157.991840 ] do_syscall_64+0x3d/0x90 [ 157.992198 ] entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: 04de7dda7394 ("net/mlx5e: Infrastructure for duplicated offloading of TC flows") Fixes: 1418ddd96afd ("net/mlx5e: Duplicate offloaded TC eswitch rules under uplink LAG") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-22net/mlx5: Collect command failures data only for known commandsShay Drory1-1/+2
DEVX can issue a general command, which is not used by mlx5 driver. In case such command is failed, mlx5 is trying to collect the failure data, However, mlx5 doesn't create a storage for this command, since mlx5 doesn't use it. This lead to array-index-out-of-bounds error. Fix it by checking whether the command is known before collecting the failure data. Fixes: 34f46ae0d4b3 ("net/mlx5: Add command failures data to debugfs") Signed-off-by: Shay Drory <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-223c589_cs: Fix an error handling path in tc589_probe()Christophe JAILLET1-1/+10
Should tc589_config() fail, some resources need to be released as already done in the remove function. Fixes: 15b99ac17295 ("[PATCH] pcmcia: add return value to _config() functions") Signed-off-by: Christophe JAILLET <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/d8593ae867b24c79063646e36f9b18b0790107cb.1684575975.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <[email protected]>
2023-05-22forcedeth: Fix an error handling path in nv_probe()Christophe JAILLET1-0/+1
If an error occures after calling nv_mgmt_acquire_sema(), it should be undone with a corresponding nv_mgmt_release_sema() call. Add it in the error handling path of the probe as already done in the remove function. Fixes: cac1c52c3621 ("forcedeth: mgmt unit interface") Signed-off-by: Christophe JAILLET <[email protected]> Acked-by: Zhu Yanjun <[email protected]> Link: https://lore.kernel.org/r/355e9a7d351b32ad897251b6f81b5886fcdc6766.1684571393.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <[email protected]>
2023-05-22scsi: qla2xxx: Fix NULL pointer dereference in target modeGleb Chesnokov4-0/+10
When target mode is enabled, the pci_irq_get_affinity() function may return a NULL value in qla_mapq_init_qp_cpu_map() due to the qla24xx_enable_msix() code that handles IRQ settings for target mode. This leads to a crash due to a NULL pointer dereference. This patch fixes the issue by adding a check for the NULL value returned by pci_irq_get_affinity() and introducing a 'cpu_mapped' boolean flag to the qla_qpair structure, ensuring that the qpair's CPU affinity is updated when it has not been mapped to a CPU. Fixes: 1d201c81d4cc ("scsi: qla2xxx: Select qpair depending on which CPU post_cmd() gets called") Signed-off-by: Gleb Chesnokov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Himanshu Madhani <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2023-05-22scsi: target: iscsi: Prevent login threads from racing between each otherMaurizio Lombardi1-1/+3
The tpg->np_login_sem is a semaphore that is used to serialize the login process when multiple login threads run concurrently against the same target portal group. The iscsi_target_locate_portal() function finds the tpg, calls iscsit_access_np() against the np_login_sem semaphore and saves the tpg pointer in conn->tpg; If iscsi_target_locate_portal() fails, the caller will check for the conn->tpg pointer and, if it's not NULL, then it will assume that iscsi_target_locate_portal() called iscsit_access_np() on the semaphore. Make sure that conn->tpg gets initialized only if iscsit_access_np() was successful, otherwise iscsit_deaccess_np() may end up being called against a semaphore we never took, allowing more than one thread to access the same tpg. Signed-off-by: Maurizio Lombardi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2023-05-22scsi: target: iscsi: Fix hang in the iSCSI login codeMaurizio Lombardi5-91/+99
If the initiator suddenly stops sending data during a login while keeping the TCP connection open, the login_work won't be scheduled and will never release the login semaphore; concurrent login operations will therefore get stuck and fail. The bug is due to the inability of the login timeout code to properly handle this particular case. Fix the problem by replacing the old per-NP login timer with a new per-connection timer. The timer is started when an initiator connects to the target; if it expires, it sends a SIGINT signal to the thread pointed at by the conn->login_kworker pointer. conn->login_kworker is set by calling the iscsit_set_login_timer_kworker() helper, initially it will point to the np thread; When the login operation's control is in the process of being passed from the NP-thread to login_work, the conn->login_worker pointer is set to NULL. Finally, login_kworker will be changed to point to the worker thread executing the login_work job. If conn->login_kworker is NULL when the timer expires, it means that the login operation hasn't been completed yet but login_work isn't running, in this case the timer will mark the login process as failed and will schedule login_work so the latter will be forced to free the resources it holds. Signed-off-by: Maurizio Lombardi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2023-05-22parisc: Flush gatt writes and adjust gatt mask in parisc_agp_mask_memory()Helge Deller1-1/+14
Flush caches after changing gatt entries and calculate entry according to SBA requirements. Signed-off-by: Helge Deller <[email protected]>
2023-05-22iommu/amd: Fix domain flush size when syncing iotlbJon Pan-Doh1-1/+1
When running on an AMD vIOMMU, we observed multiple invalidations (of decreasing power of 2 aligned sizes) when unmapping a single page. Domain flush takes gather bounds (end-start) as size param. However, gather->end is defined as the last inclusive address (start + size - 1). This leads to an off by 1 error. With this patch, verified that 1 invalidation occurs when unmapping a single page. Fixes: a270be1b3fdf ("iommu/amd: Use only natural aligned flushes in a VM") Cc: [email protected] # >= 5.15 Signed-off-by: Jon Pan-Doh <[email protected]> Tested-by: Sudheer Dantuluri <[email protected]> Suggested-by: Gary Zibrat <[email protected]> Reviewed-by: Vasant Hegde <[email protected]> Acked-by: Nadav Amit <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2023-05-22iommu/amd: Add missing domain type checksJason Gunthorpe1-1/+5
Drivers are supposed to list the domain types they support in their domain_alloc() ops so when we add new domain types, like BLOCKING or SVA, they don't start breaking. This ended up providing an empty UNMANAGED domain when the core code asked for a BLOCKING domain, which happens to be the fallback for drivers that don't support it, but this is completely wrong for SVA. Check for the DMA types AMD supports and reject every other kind. Fixes: 136467962e49 ("iommu: Add IOMMU SVA domain support") Signed-off-by: Jason Gunthorpe <[email protected]> Reviewed-by: Vasant Hegde <[email protected]> Reviewed-by: Kevin Tian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2023-05-22iommu/amd: Fix up merge conflict resolutionJerry Snitselaar1-3/+0
Merge commit e17c6debd4b2 ("Merge branches 'arm/mediatek', 'arm/msm', 'arm/renesas', 'arm/rockchip', 'arm/smmu', 'x86/vt-d' and 'x86/amd' into next") added amd_iommu_init_devices, amd_iommu_uninit_devices, and amd_iommu_init_notifier back to drivers/iommu/amd/amd_iommu.h. The only references to them are here, so clean them up. Fixes: e17c6debd4b2 ("Merge branches 'arm/mediatek', 'arm/msm', 'arm/renesas', 'arm/rockchip', 'arm/smmu', 'x86/vt-d' and 'x86/amd' into next") Cc: Joerg Roedel <[email protected]> Cc: Suravee Suthikulpanit <[email protected]> Cc: Will Deacon <[email protected]> Cc: Robin Murphy <[email protected]> Signed-off-by: Jerry Snitselaar <[email protected]> Reviewed-by: Vasant Hegde <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2023-05-22iommu/amd: Handle GALog overflowsJoao Martins3-1/+33
GALog exists to propagate interrupts into all vCPUs in the system when interrupts are marked as non running (e.g. when vCPUs aren't running). A GALog overflow happens when there's in no space in the log to record the GATag of the interrupt. So when the GALOverflow condition happens, the GALog queue is processed and the GALog is restarted, as the IOMMU manual indicates in section "2.7.4 Guest Virtual APIC Log Restart Procedure": | * Wait until MMIO Offset 2020h[GALogRun]=0b so that all request | entries are completed as circumstances allow. GALogRun must be 0b to | modify the guest virtual APIC log registers safely. | * Write MMIO Offset 0018h[GALogEn]=0b. | * As necessary, change the following values (e.g., to relocate or | resize the guest virtual APIC event log): | - the Guest Virtual APIC Log Base Address Register | [MMIO Offset 00E0h], | - the Guest Virtual APIC Log Head Pointer Register | [MMIO Offset 2040h][GALogHead], and | - the Guest Virtual APIC Log Tail Pointer Register | [MMIO Offset 2048h][GALogTail]. | * Write MMIO Offset 2020h[GALOverflow] = 1b to clear the bit (W1C). | * Write MMIO Offset 0018h[GALogEn] = 1b, and either set | MMIO Offset 0018h[GAIntEn] to enable the GA log interrupt or clear | the bit to disable it. Failing to handle the GALog overflow means that none of the VFs (in any guest) will work with IOMMU AVIC forcing the user to power cycle the host. When handling the event it resumes the GALog without resizing much like how it is done in the event handler overflow. The [MMIO Offset 2020h][GALOverflow] bit might be set in status register without the [MMIO Offset 2020h][GAInt] bit, so when deciding to poll for GA events (to clear space in the galog), also check the overflow bit. [suravee: Check for GAOverflow without GAInt, toggle CONTROL_GAINT_EN] Co-developed-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Joao Martins <[email protected]> Reviewed-by: Vasant Hegde <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2023-05-22iommu/amd: Don't block updates to GATag if guest mode is onJoao Martins1-2/+1
On KVM GSI routing table updates, specially those where they have vIOMMUs with interrupt remapping enabled (to boot >255vcpus setups without relying on KVM_FEATURE_MSI_EXT_DEST_ID), a VMM may update the backing VF MSIs with a new VCPU affinity. On AMD with AVIC enabled, the new vcpu affinity info is updated via: avic_pi_update_irte() irq_set_vcpu_affinity() amd_ir_set_vcpu_affinity() amd_iommu_{de}activate_guest_mode() Where the IRTE[GATag] is updated with the new vcpu affinity. The GATag contains VM ID and VCPU ID, and is used by IOMMU hardware to signal KVM (via GALog) when interrupt cannot be delivered due to vCPU is in blocking state. The issue is that amd_iommu_activate_guest_mode() will essentially only change IRTE fields on transitions from non-guest-mode to guest-mode and otherwise returns *with no changes to IRTE* on already configured guest-mode interrupts. To the guest this means that the VF interrupts remain affined to the first vCPU they were first configured, and guest will be unable to issue VF interrupts and receive messages like this from spurious interrupts (e.g. from waking the wrong vCPU in GALog): [ 167.759472] __common_interrupt: 3.34 No irq handler for vector [ 230.680927] mlx5_core 0000:00:02.0: mlx5_cmd_eq_recover:247:(pid 3122): Recovered 1 EQEs on cmd_eq [ 230.681799] mlx5_core 0000:00:02.0: wait_func_handle_exec_timeout:1113:(pid 3122): cmd[0]: CREATE_CQ(0x400) recovered after timeout [ 230.683266] __common_interrupt: 3.34 No irq handler for vector Given the fact that amd_ir_set_vcpu_affinity() uses amd_iommu_activate_guest_mode() underneath it essentially means that VCPU affinity changes of IRTEs are nops. Fix it by dropping the check for guest-mode at amd_iommu_activate_guest_mode(). Same thing is applicable to amd_iommu_deactivate_guest_mode() although, even if the IRTE doesn't change underlying DestID on the host, the VFIO IRQ handler will still be able to poke at the right guest-vCPU. Fixes: b9c6ff94e43a ("iommu/amd: Re-factor guest virtual APIC (de-)activation code") Signed-off-by: Joao Martins <[email protected]> Reviewed-by: Suravee Suthikulpanit <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2023-05-22iommu/rockchip: Fix unwind goto issueChao Wang1-6/+8
Smatch complains that drivers/iommu/rockchip-iommu.c:1306 rk_iommu_probe() warn: missing unwind goto? The rk_iommu_probe function, after obtaining the irq value through platform_get_irq, directly returns an error if the returned value is negative, without releasing any resources. Fix this by adding a new error handling label "err_pm_disable" and use a goto statement to redirect to the error handling process. In order to preserve the original semantics, set err to the value of irq. Fixes: 1aa55ca9b14a ("iommu/rockchip: Move irq request past pm_runtime_enable") Signed-off-by: Chao Wang <[email protected]> Reviewed-by: Dongliang Mu <[email protected]> Reviewed-by: Heiko Stuebner <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2023-05-22iommu: Make IPMMU_VMSA dependencies more strictRandy Dunlap1-0/+1
On riscv64, linux-next-20233030 (and for several days earlier), there is a kconfig warning: WARNING: unmet direct dependencies detected for IOMMU_IO_PGTABLE_LPAE Depends on [n]: IOMMU_SUPPORT [=y] && (ARM || ARM64 || COMPILE_TEST [=n]) && !GENERIC_ATOMIC64 [=n] Selected by [y]: - IPMMU_VMSA [=y] && IOMMU_SUPPORT [=y] && (ARCH_RENESAS [=y] || COMPILE_TEST [=n]) && !GENERIC_ATOMIC64 [=n] and build errors: riscv64-linux-ld: drivers/iommu/io-pgtable-arm.o: in function `.L140': io-pgtable-arm.c:(.init.text+0x1e8): undefined reference to `alloc_io_pgtable_ops' riscv64-linux-ld: drivers/iommu/io-pgtable-arm.o: in function `.L168': io-pgtable-arm.c:(.init.text+0xab0): undefined reference to `free_io_pgtable_ops' riscv64-linux-ld: drivers/iommu/ipmmu-vmsa.o: in function `.L140': ipmmu-vmsa.c:(.text+0xbc4): undefined reference to `free_io_pgtable_ops' riscv64-linux-ld: drivers/iommu/ipmmu-vmsa.o: in function `.L0 ': ipmmu-vmsa.c:(.text+0x145e): undefined reference to `alloc_io_pgtable_ops' Add ARM || ARM64 || COMPILE_TEST dependencies to IPMMU_VMSA to prevent these issues, i.e., so that ARCH_RENESAS on RISC-V is not allowed. This makes the ARCH dependencies become: depends on (ARCH_RENESAS && (ARM || ARM64)) || COMPILE_TEST but that can be a bit hard to read. Fixes: 8292493c22c8 ("riscv: Kconfig.socs: Add ARCH_RENESAS kconfig option") Signed-off-by: Randy Dunlap <[email protected]> Suggested-by: Geert Uytterhoeven <[email protected]> Cc: Joerg Roedel <[email protected]> Cc: Will Deacon <[email protected]> Cc: Robin Murphy <[email protected]> Cc: [email protected] Cc: Conor Dooley <[email protected]> Cc: Lad Prabhakar <[email protected]> Reviewed-by: Robin Murphy <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2023-05-22drm/i915: Fix PIPEDMC disabling for a bigjoiner configurationImre Deak1-2/+10
For a bigjoiner configuration display->crtc_disable() will be called first for the slave CRTCs and then for the master CRTC. However slave CRTCs will be actually disabled only after the master CRTC is disabled (from the encoder disable hooks called with the master CRTC state). Hence the slave PIPEDMCs can be disabled only after the master CRTC is disabled, make this so. intel_encoders_post_pll_disable() must be called only for the master CRTC, as for the other two encoder disable hooks. While at it fix this up as well. This didn't cause a problem, since intel_encoders_post_pll_disable() will call the corresponding hook only for an encoder/connector connected to the given CRTC, however slave CRTCs will have no associated encoder/connector. Fixes: 3af2ff0840be ("drm/i915: Enable a PIPEDMC whenever its corresponding pipe is enabled") Cc: Rodrigo Vivi <[email protected]> Cc: Ville Syrjälä <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 7eeef32719f6af935a1554813e6bc206446339cd) Signed-off-by: Joonas Lahtinen <[email protected]>
2023-05-22spi: spi-cadence: Interleave write of TX and read of RX FIFOCharles Keepax1-34/+30
When working in slave mode it seems the timing is exceedingly tight. The TX FIFO can never empty, because the master is driving the clock so zeros would be sent for those bytes where the FIFO is empty. Return to interleaving the writing of the TX FIFO and the reading of the RX FIFO to try to ensure the data is available when required. Fixes: a84c11e16dc2 ("spi: spi-cadence: Avoid read of RX FIFO before its ready") Signed-off-by: Charles Keepax <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2023-05-22drm: fix drmm_mutex_init()Matthew Auld1-20/+2
In mutex_init() lockdep identifies a lock by defining a special static key for each lock class. However if we wrap the macro in a function, like in drmm_mutex_init(), we end up generating: int drmm_mutex_init(struct drm_device *dev, struct mutex *lock) { static struct lock_class_key __key; __mutex_init((lock), "lock", &__key); .... } The static __key here is what lockdep uses to identify the lock class, however since this is just a normal function the key here will be created once, where all callers then use the same key. In effect the mutex->depmap.key will be the same pointer for different drmm_mutex_init() callers. This then results in impossible lockdep splats since lockdep thinks completely unrelated locks are the same lock class. To fix this turn drmm_mutex_init() into a macro such that it generates a different "static struct lock_class_key __key" for each invocation, which looks to be inline with what mutex_init() wants. v2: - Revamp the commit message with clearer explanation of the issue. - Rather export __drmm_mutex_release() than static inline. Reported-by: Thomas Hellström <[email protected]> Reported-by: Sarah Walker <[email protected]> Fixes: e13f13e039dc ("drm: Add DRM-managed mutex_init()") Cc: Stanislaw Gruszka <[email protected]> Cc: Boris Brezillon <[email protected]> Cc: Thomas Zimmermann <[email protected]> Cc: Jocelyn Falempe <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Signed-off-by: Matthew Auld <[email protected]> Reviewed-by: Boris Brezillon <[email protected]> Reviewed-by: Stanislaw Gruszka <[email protected]> Reviewed-by: Lucas De Marchi <[email protected]> Acked-by: Thomas Zimmermann <[email protected]> Signed-off-by: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-05-22Merge tag 'irqchip-fixes-6.4-1' of ↵Thomas Gleixner6-31/+63
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - MIPS GIC fixes for issues that could result in either loss of state in the interrupt controller, or a deadlock - Workaround for Mediatek Chromebooks that only save/restore partial state when turning the GIC redistributors off, resulting if fireworks if Linux uses interrupt priorities for pseudo-NMIs - Fix the MBIGEN error handling on init - Mark meson-gpio OF data structures as __maybe_unused, avoiding compilation warnings on non-OF setups Link: https://lore.kernel.org/lkml/[email protected]
2023-05-21Merge tag 'fbdev-for-6.4-rc3' of ↵Linus Torvalds7-28/+20
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev fixes from Helge Deller: "A few small unspectacular fbdev fixes: - Fix for USB endpoint check in udlfb (found by syzbot fuzzer) - Small fix in error code path in omapfb - compiler warning fixes in fbmem & i810 - code removal and whitespace cleanups in stifb and atyfb" * tag 'fbdev-for-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbdev: stifb: Whitespace cleanups fbdev: udlfb: Use usb_control_msg_send() fbdev: udlfb: Fix endpoint check fbdev: atyfb: Remove unused clock determination fbdev: i810: include i810_main.h in i810_dvt.c fbdev: fbmem: mark get_fb_unmapped_area() static fbdev: omapfb: panel-tpo-td043mtea1: fix error code in probe()
2023-05-20fbdev: stifb: Whitespace cleanupsHelge Deller1-3/+3
Missed whitespace cleanups in stifb. Fixes: 8000425739dc ("fbdev: stifb: Remove trailing whitespaces") Signed-off-by: Helge Deller <[email protected]>
2023-05-20fbdev: udlfb: Use usb_control_msg_send()Helge Deller1-11/+3
Use the newly introduced usb_control_msg_send() instead of usb_control_msg() when selecting the channel. Reviewed-by: Alan Stern <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2023-05-20Merge tag 'tty-6.4-rc3' of ↵Linus Torvalds7-12/+45
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial fixes from Greg KH: "Here are some small tty and serial driver fixes for 6.4-rc3 to resolve some reported problems, and add some new device ids. These include: - termios documentation updates - vc_screen use-after-free fix - memory leak fix in arc_uart driver - new 8250 driver ids - other small serial driver fixes All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF serial: qcom-geni: fix enabling deactivated interrupt serial: 8250_bcm7271: fix leak in `brcmuart_probe` serial: 8250_bcm7271: balance clk_enable calls serial: arc_uart: fix of_iomap leak in `arc_serial_probe` serial: 8250: Document termios parameter of serial8250_em485_config() serial: Add support for Advantech PCI-1611U card serial: 8250_exar: Add support for USR298x PCI Modems
2023-05-20Merge tag 'usb-6.4-rc3' of ↵Linus Torvalds17-162/+307
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt fixes from Greg KH: "Here are some USB fixes for 6.4-rc3, as well as a driver core fix that resolves a memory leak that shows up in USB devices easier than other subsystems. Included in here are: - driver core memory leak as reported and tested by syzbot and developers - dwc3 driver fixes for reported problems - xhci driver fixes for reported problems - USB gadget driver reverts to resolve regressions - usbtmc driver fix for syzbot reported problem - thunderbolt driver fixes for reported issues - other small USB fixes All of these, except for the driver core fix, have been in linux-next with no reported problems. The driver core fix was tested and verified to solve the issue by syzbot and the original reporter" * tag 'usb-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: driver core: class: properly reference count class_dev_iter() xhci: Fix incorrect tracking of free space on transfer rings xhci-pci: Only run d3cold avoidance quirk for s2idle usb-storage: fix deadlock when a scsi command timeouts more than once usb: dwc3: fix a test for error in dwc3_core_init() usb: typec: tps6598x: Fix fault at module removal usb: gadget: u_ether: Fix host MAC address case usb: typec: altmodes/displayport: fix pin_assignment_show Revert "usb: gadget: udc: core: Invoke usb_gadget_connect only when started" Revert "usb: gadget: udc: core: Prevent redundant calls to pullup" usb: gadget: drop superfluous ':' in doc string usb: dwc3: debugfs: Resume dwc3 before accessing registers USB: UHCI: adjust zhaoxin UHCI controllers OverCurrent bit value usb: dwc3: fix gadget mode suspend interrupt handler issue usb: dwc3: gadget: Improve dwc3_gadget_suspend() and dwc3_gadget_resume() USB: usbtmc: Fix direction for 0-length ioctl control messages thunderbolt: Clear registers properly when auto clear isn't in use
2023-05-20binder: fix UAF of alloc->vma in race with munmap()Carlos Llamas1-3/+3
[ cmllamas: clean forward port from commit 015ac18be7de ("binder: fix UAF of alloc->vma in race with munmap()") in 5.10 stable. It is needed in mainline after the revert of commit a43cfc87caaf ("android: binder: stop saving a pointer to the VMA") as pointed out by Liam. The commit log and tags have been tweaked to reflect this. ] In commit 720c24192404 ("ANDROID: binder: change down_write to down_read") binder assumed the mmap read lock is sufficient to protect alloc->vma inside binder_update_page_range(). This used to be accurate until commit dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap"), which now downgrades the mmap_lock after detaching the vma from the rbtree in munmap(). Then it proceeds to teardown and free the vma with only the read lock held. This means that accesses to alloc->vma in binder_update_page_range() now will race with vm_area_free() in munmap() and can cause a UAF as shown in the following KASAN trace: ================================================================== BUG: KASAN: use-after-free in vm_insert_page+0x7c/0x1f0 Read of size 8 at addr ffff16204ad00600 by task server/558 CPU: 3 PID: 558 Comm: server Not tainted 5.10.150-00001-gdc8dcf942daa #1 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x2a0 show_stack+0x18/0x2c dump_stack+0xf8/0x164 print_address_description.constprop.0+0x9c/0x538 kasan_report+0x120/0x200 __asan_load8+0xa0/0xc4 vm_insert_page+0x7c/0x1f0 binder_update_page_range+0x278/0x50c binder_alloc_new_buf+0x3f0/0xba0 binder_transaction+0x64c/0x3040 binder_thread_write+0x924/0x2020 binder_ioctl+0x1610/0x2e5c __arm64_sys_ioctl+0xd4/0x120 el0_svc_common.constprop.0+0xac/0x270 do_el0_svc+0x38/0xa0 el0_svc+0x1c/0x2c el0_sync_handler+0xe8/0x114 el0_sync+0x180/0x1c0 Allocated by task 559: kasan_save_stack+0x38/0x6c __kasan_kmalloc.constprop.0+0xe4/0xf0 kasan_slab_alloc+0x18/0x2c kmem_cache_alloc+0x1b0/0x2d0 vm_area_alloc+0x28/0x94 mmap_region+0x378/0x920 do_mmap+0x3f0/0x600 vm_mmap_pgoff+0x150/0x17c ksys_mmap_pgoff+0x284/0x2dc __arm64_sys_mmap+0x84/0xa4 el0_svc_common.constprop.0+0xac/0x270 do_el0_svc+0x38/0xa0 el0_svc+0x1c/0x2c el0_sync_handler+0xe8/0x114 el0_sync+0x180/0x1c0 Freed by task 560: kasan_save_stack+0x38/0x6c kasan_set_track+0x28/0x40 kasan_set_free_info+0x24/0x4c __kasan_slab_free+0x100/0x164 kasan_slab_free+0x14/0x20 kmem_cache_free+0xc4/0x34c vm_area_free+0x1c/0x2c remove_vma+0x7c/0x94 __do_munmap+0x358/0x710 __vm_munmap+0xbc/0x130 __arm64_sys_munmap+0x4c/0x64 el0_svc_common.constprop.0+0xac/0x270 do_el0_svc+0x38/0xa0 el0_svc+0x1c/0x2c el0_sync_handler+0xe8/0x114 el0_sync+0x180/0x1c0 [...] ================================================================== To prevent the race above, revert back to taking the mmap write lock inside binder_update_page_range(). One might expect an increase of mmap lock contention. However, binder already serializes these calls via top level alloc->mutex. Also, there was no performance impact shown when running the binder benchmark tests. Fixes: c0fd2101781e ("Revert "android: binder: stop saving a pointer to the VMA"") Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap") Reported-by: Jann Horn <[email protected]> Closes: https://lore.kernel.org/all/20230518144052.xkj6vmddccq4v66b@revolver Cc: <[email protected]> Cc: Minchan Kim <[email protected]> Cc: Yang Shi <[email protected]> Cc: Liam Howlett <[email protected]> Signed-off-by: Carlos Llamas <[email protected]> Acked-by: Todd Kjos <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-05-20iio: imu: inv_icm42600: fix timestamp resetJean-Baptiste Maneyrol1-5/+5
Timestamp reset is not done in the correct place. It must be done before enabling buffer. The reason is that interrupt timestamping is always happening when the chip is on, even if the corresponding sensor is off. When the sensor restarts, timestamp is wrong if you don't do a reset first. Fixes: ec74ae9fd37c ("iio: imu: inv_icm42600: add accurate timestamping") Signed-off-by: Jean-Baptiste Maneyrol <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-20Merge tag 'block-6.4-2023-05-20' of git://git.kernel.dk/linuxLinus Torvalds7-8/+58
Pull block fixes from Jens Axboe: - NVMe pull request via Keith: - More device quirks (Sagi, Hristo, Adrian, Daniel) - Controller delete race (Maurizo) - Multipath cleanup fix (Christoph) - Deny writeable mmap mapping on a readonly block device (Loic) - Kill unused define that got introduced by accident (Christoph) - Error handling fix for s390 dasd (Stefan) - ublk locking fix (Ming) * tag 'block-6.4-2023-05-20' of git://git.kernel.dk/linux: block: remove NFL4_UFLG_MASK block: Deny writable memory mapping if block is read-only s390/dasd: fix command reject error on ESE devices nvme-pci: Add quirk for Teamgroup MP33 SSD ublk: fix AB-BA lockdep warning nvme: do not let the user delete a ctrl before a complete initialization nvme-multipath: don't call blk_mark_disk_dead in nvme_mpath_remove_disk nvme-pci: clamp max_hw_sectors based on DMA optimized limitation nvme-pci: add quirk for missing secondary temperature thresholds nvme-pci: add NVME_QUIRK_BOGUS_NID for HS-SSD-FUTURE 2048G
2023-05-20iio: adc: ad_sigma_delta: Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flagMasahiro Honda1-0/+4
The Sigma-Delta ADCs supported by this driver can use SDO as an interrupt line to indicate the completion of a conversion. However, some devices cannot properly detect the completion of a conversion by an interrupt. This is for the reason mentioned in the following commit. commit e9849777d0e2 ("genirq: Add flag to force mask in disable_irq[_nosync]()") A read operation is performed by an extra interrupt before the completion of a conversion. At this time, the value read from the ADC data register is the same as the previous conversion result. This patch fixes the issue by setting IRQ_DISABLE_UNLAZY flag. Fixes: 0c6ef985a1fd ("iio: adc: ad7791: fix IRQ flags") Fixes: 1a913270e57a ("iio: adc: ad7793: Fix IRQ flag") Fixes: e081102f3077 ("iio: adc: ad7780: Fix IRQ flag") Fixes: 89a86da5cb8e ("iio: adc: ad7192: Add IRQ flag") Fixes: 79ef91493f54 ("iio: adc: ad7124: Set IRQ type to falling") Signed-off-by: Masahiro Honda <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-19Merge tag 'for-net-2023-05-19' of ↵Jakub Kicinski1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix compiler warnings on btnxpuart - Fix potential double free on hci_conn_unlink - Fix UAF on hci_conn_hash_flush * tag 'for-net-2023-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: btnxpuart: Fix compiler warnings Bluetooth: Unlink CISes when LE disconnects in hci_conn_del Bluetooth: Fix UAF in hci_conn_hash_flush again Bluetooth: Refcnt drop must be placed last in hci_conn_unlink Bluetooth: Fix potential double free caused by hci_conn_unlink ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-05-19net: fix stack overflow when LRO is disabled for virtual interfacesTaehee Yoo2-2/+13
When the virtual interface's feature is updated, it synchronizes the updated feature for its own lower interface. This propagation logic should be worked as the iteration, not recursively. But it works recursively due to the netdev notification unexpectedly. This problem occurs when it disables LRO only for the team and bonding interface type. team0 | +------+------+-----+-----+ | | | | | team1 team2 team3 ... team200 If team0's LRO feature is updated, it generates the NETDEV_FEAT_CHANGE event to its own lower interfaces(team1 ~ team200). It is worked by netdev_sync_lower_features(). So, the NETDEV_FEAT_CHANGE notification logic of each lower interface work iteratively. But generated NETDEV_FEAT_CHANGE event is also sent to the upper interface too. upper interface(team0) generates the NETDEV_FEAT_CHANGE event for its own lower interfaces again. lower and upper interfaces receive this event and generate this event again and again. So, the stack overflow occurs. But it is not the infinite loop issue. Because the netdev_sync_lower_features() updates features before generating the NETDEV_FEAT_CHANGE event. Already synchronized lower interfaces skip notification logic. So, it is just the problem that iteration logic is changed to the recursive unexpectedly due to the notification mechanism. Reproducer: ip link add team0 type team ethtool -K team0 lro on for i in {1..200} do ip link add team$i master team0 type team ethtool -K team$i lro on done ethtool -K team0 lro off In order to fix it, the notifier_ctx member of bonding/team is introduced. Reported-by: [email protected] Fixes: fd867d51f889 ("net/core: generic support for disabling netdev features down stack") Signed-off-by: Taehee Yoo <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Reviewed-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.