aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-06-08vdpa/mlx5: fix error code for deleting vlanDan Carpenter1-0/+1
Return success if we were able to delete a vlan. The current code always returns failure. Fixes: baf2ad3f6a98 ("vdpa/mlx5: Add RX MAC VLAN filter support") Signed-off-by: Dan Carpenter <[email protected]> Message-Id: <Yp709f1g9NcMBCHg@kili> Signed-off-by: Michael S. Tsirkin <[email protected]> Acked-by: Eli Cohen <[email protected]> Acked-by: Si-Wei Liu <[email protected]>
2022-06-08virtio-mmio: fix missing put_device() when vm_cmdline_parent registration failedchengkaitao1-0/+1
The reference must be released when device_register(&vm_cmdline_parent) failed. Add the corresponding 'put_device()' in the error handling path. Signed-off-by: chengkaitao <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]> Acked-by: Jason Wang <[email protected]>
2022-06-08vdpa/mlx5: Fix syntax errors in commentsXiang wangx1-1/+1
Delete the redundant word 'is'. Signed-off-by: Xiang wangx <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]> Acked-by: Jason Wang <[email protected]>
2022-06-08virtio-rng: make device ready before making requestJason Wang1-0/+2
Current virtio-rng does a entropy request before DRIVER_OK, this violates the spec: virtio spec requires that all drivers set DRIVER_OK before using devices. Further, kernel will ignore the interrupt after commit 8b4ec69d7e09 ("virtio: harden vring IRQ"). Fixing this by making device ready before the request. Cc: [email protected] Fixes: 8b4ec69d7e09 ("virtio: harden vring IRQ") Fixes: f7f510ec1957 ("virtio: An entropy device, as suggested by hpa.") Reported-and-tested-by: [email protected] Signed-off-by: Jason Wang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]> Reviewed-by: Laurent Vivier <[email protected]>
2022-06-08HID: hyperv: Correctly access fields declared as __le16Michael Kelley1-2/+3
Add the use of le16_to_cpu() for fields declared as __le16. Because Hyper-V only runs in Little Endian mode, there's no actual bug. The change is made in the interest of general correctness in addition to making sparse happy. No functional change. Reported-by: kernel test robot <[email protected]> Signed-off-by: Michael Kelley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Wei Liu <[email protected]>
2022-06-08clocksource: hyper-v: unexport __init-annotated hv_init_clocksource()Masahiro Yamada1-1/+0
EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the only in-tree call-site, arch/x86/kernel/cpu/mshyperv.c is never compiled as modular. (CONFIG_HYPERVISOR_GUEST is boolean) Fixes: dd2cb348613b ("clocksource/drivers: Continue making Hyper-V clocksource ISA agnostic") Reported-by: Stephen Rothwell <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]> Reviewed-by: Vitaly Kuznetsov <[email protected]> Reviewed-by: Michael Kelley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Wei Liu <[email protected]>
2022-06-08Drivers: hv: Fix syntax errors in commentsXiang wangx1-1/+1
Delete the redundant word 'in'. Signed-off-by: Xiang wangx <[email protected]> Reviewed-by: Michael Kelley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Wei Liu <[email protected]>
2022-06-08Drivers: hv: vmbus: Don't assign VMbus channel interrupts to isolated CPUsSaurabh Sengar2-5/+16
When initially assigning a VMbus channel interrupt to a CPU, don’t choose a managed IRQ isolated CPU (as specified on the kernel boot line with parameter 'isolcpus=managed_irq,<#cpu>'). Also, when using sysfs to change the CPU that a VMbus channel will interrupt, don't allow changing to a managed IRQ isolated CPU. Signed-off-by: Saurabh Sengar <[email protected]> Reviewed-by: Michael Kelley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Wei Liu <[email protected]>
2022-06-08soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probeMiaoqian Lin1-0/+1
of_find_matching_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. In brcmstb_init_sram, it pass dn to of_address_to_resource(), of_address_to_resource() will call of_find_device_by_node() to take reference, so we should release the reference returned by of_find_matching_node(). Fixes: 0b741b8234c8 ("soc: bcm: brcmstb: Add support for S2/S3/S5 suspend states (ARM)") Signed-off-by: Miaoqian Lin <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2022-06-07net/mlx4_en: Fix wrong return value on ioctl EEPROM query failureGal Pressman1-1/+1
The ioctl EEPROM query wrongly returns success on read failures, fix that by returning the appropriate error code. Fixes: 7202da8b7f71 ("ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool support") Signed-off-by: Gal Pressman <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-07net: dsa: lantiq_gswip: Fix refcount leak in gswip_gphy_fw_listMiaoqian Lin1-1/+3
Every iteration of for_each_available_child_of_node() decrements the reference count of the previous node. when breaking early from a for_each_available_child_of_node() loop, we need to explicitly call of_node_put() on the gphy_fw_np. Add missing of_node_put() to avoid refcount leak. Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Miaoqian Lin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-08libata: fix translation of concurrent positioning rangesTyler Erickson1-1/+1
Fixing the page length in the SCSI translation for the concurrent positioning ranges VPD page. It was writing starting in offset 3 rather than offset 2 where the MSB is supposed to start for the VPD page length. Cc: [email protected] Fixes: fe22e1c2f705 ("libata: support concurrent positioning ranges log") Signed-off-by: Tyler Erickson <[email protected]> Reviewed-by: Muhammad Ahmad <[email protected]> Tested-by: Michael English <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Damien Le Moal <[email protected]>
2022-06-08libata: fix reading concurrent positioning ranges logTyler Erickson1-8/+13
The concurrent positioning ranges log is not a fixed size and may depend on how many ranges are supported by the device. This patch uses the size reported in the GPL directory to determine the number of pages supported by the device before attempting to read this log page. This resolves this error from the dmesg output: ata6.00: Read log 0x47 page 0x00 failed, Emask 0x1 Cc: [email protected] Fixes: fe22e1c2f705 ("libata: support concurrent positioning ranges log") Signed-off-by: Tyler Erickson <[email protected]> Reviewed-by: Muhammad Ahmad <[email protected]> Tested-by: Michael English <[email protected]> Signed-off-by: Damien Le Moal <[email protected]>
2022-06-07scsi: pmcraid: Fix missing resource cleanup in error caseChengguang Xu1-1/+1
Fix missing resource cleanup (when '(--i) == 0') for error case in pmcraid_register_interrupt_handler(). Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Dan Carpenter <[email protected]> Signed-off-by: Chengguang Xu <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-06-07scsi: ipr: Fix missing/incorrect resource cleanup in error caseChengguang Xu1-2/+2
Fix missing resource cleanup (when '(--i) == 0') for error case in ipr_alloc_mem() and skip incorrect resource cleanup (when '(--i) == 0') for error case in ipr_request_other_msi_irqs() because variable i started from 1. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Dan Carpenter <[email protected]> Acked-by: Brian King <[email protected]> Signed-off-by: Chengguang Xu <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-06-07scsi: mpt3sas: Fix out-of-bounds compiler warningHelge Deller1-11/+12
I'm facing this warning when building for the parisc64 architecture: drivers/scsi/mpt3sas/mpt3sas_base.c: In function ‘_base_make_ioc_operational’: drivers/scsi/mpt3sas/mpt3sas_base.c:5396:40: warning: array subscript ‘Mpi2SasIOUnitPage1_t {aka struct _MPI2_CONFIG_PAGE_SASIOUNIT_1}[0]’ is partly outside array bounds of ‘unsigned char[20]’ [-Warray-bounds] 5396 | (le16_to_cpu(sas_iounit_pg1->SASWideMaxQueueDepth)) ? drivers/scsi/mpt3sas/mpt3sas_base.c:5382:26: note: referencing an object of size 20 allocated by ‘kzalloc’ 5382 | sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); | ^~~~~~~~~~~~~~~~~~~~~~~ The problem is, that only 20 bytes are allocated with kmalloc(), which is sufficient to hold the bytes which are needed. Nevertheless, gcc complains because the whole Mpi2SasIOUnitPage1_t struct is 32 bytes in size and thus doesn't fit into those 20 bytes. This patch simply allocates all 32 bytes (instead of 20) and thus avoids the warning. There is no functional change introduced by this patch. While touching the code I cleaned up to calculation of max_wideport_qd, max_narrowport_qd and max_sata_qd to make it easier readable. Test successfully tested on a HP C8000 PA-RISC workstation with 64-bit kernel. Link: https://lore.kernel.org/r/YpZ197iZdDZSCzrT@p100 Signed-off-by: Helge Deller <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-06-07scsi: lpfc: Update lpfc version to 14.2.0.4James Smart1-1/+1
Update lpfc version to 14.2.0.4 Link: https://lore.kernel.org/r/[email protected] Co-developed-by: Justin Tee <[email protected]> Signed-off-by: Justin Tee <[email protected]> Signed-off-by: James Smart <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-06-07scsi: lpfc: Allow reduced polling rate for nvme_admin_async_event cmd completionJames Smart2-2/+12
NVMe Asynchronous Event Request commands have no command timeout value per specifications. Set WQE option to allow a reduced FLUSH polling rate for I/O error detection specifically for nvme_admin_async_event commands. Link: https://lore.kernel.org/r/[email protected] Co-developed-by: Justin Tee <[email protected]> Signed-off-by: Justin Tee <[email protected]> Signed-off-by: James Smart <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-06-07scsi: lpfc: Add more logging of cmd and cqe information for aborted NVMe cmdsJames Smart1-8/+27
When an NVMe command is aborted or completes with an ERSP, log the opcode and command ID fields to help provide more detail on the failed command. Link: https://lore.kernel.org/r/[email protected] Co-developed-by: Justin Tee <[email protected]> Signed-off-by: Justin Tee <[email protected]> Signed-off-by: James Smart <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-06-07scsi: lpfc: Fix port stuck in bypassed state after LIP in PT2PT topologyJames Smart1-1/+2
After issuing a LIP, a specific target vendor does not ACC the FLOGI that lpfc sends. However, it does send its own FLOGI that lpfc ACCs. The target then establishes the port IDs by sending a PLOGI. lpfc PLOGI_ACCs and starts the RPI registration for DID 0x000001. The target then sends a LOGO to the fabric DID. lpfc is currently treating the LOGO from the fabric DID as a link down and cleans up all the ndlps. The ndlp for DID 0x000001 is put back into NPR and discovery stops, leaving the port in stuck in bypassed mode. Change lpfc behavior such that if a LOGO is received for the fabric DID in PT2PT topology skip the lpfc_linkdown_port() routine and just move the fabric DID back to NPR. Link: https://lore.kernel.org/r/[email protected] Co-developed-by: Justin Tee <[email protected]> Signed-off-by: Justin Tee <[email protected]> Signed-off-by: James Smart <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-06-07scsi: lpfc: Resolve NULL ptr dereference after an ELS LOGO is abortedJames Smart1-12/+9
A use-after-free crash can occur after an ELS LOGO is aborted. Specifically, a nodelist structure is freed and then ndlp->vport->cfg_log_verbose is dereferenced in lpfc_nlp_get() when the discovery state machine is mistakenly called a second time with NLP_EVT_DEVICE_RM argument. Rework lpfc_cmpl_els_logo() to prevent the duplicate calls to release a nodelist structure. Link: https://lore.kernel.org/r/[email protected] Co-developed-by: Justin Tee <[email protected]> Signed-off-by: Justin Tee <[email protected]> Signed-off-by: James Smart <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-06-07scsi: lpfc: Address NULL pointer dereference after starget_to_rport()James Smart1-0/+6
Calls to starget_to_rport() may return NULL. Add check for NULL rport before dereference. Link: https://lore.kernel.org/r/[email protected] Fixes: bb21fc9911ee ("scsi: lpfc: Use fc_block_rport()") Cc: <[email protected]> # v5.18 Co-developed-by: Justin Tee <[email protected]> Signed-off-by: Justin Tee <[email protected]> Signed-off-by: James Smart <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-06-07scsi: lpfc: Resolve some cleanup issues following SLI path refactoringJames Smart2-14/+13
Following refactoring and consolidation in SLI processing, fix up some minor issues related to SLI path: - Correct the setting of LPFC_EXCHANGE_BUSY flag in response IOCB. - Fix some typographical errors. - Fix duplicate log messages. Link: https://lore.kernel.org/r/[email protected] Fixes: 1b64aa9eae28 ("scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4") Cc: <[email protected]> # v5.18 Co-developed-by: Justin Tee <[email protected]> Signed-off-by: Justin Tee <[email protected]> Signed-off-by: James Smart <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-06-07scsi: lpfc: Resolve some cleanup issues following abort path refactoringJames Smart2-5/+5
Refactoring and consolidation of abort paths: - lpfc_sli4_abort_fcp_cmpl() and lpfc_sli_abort_fcp_cmpl() are combined into a single generic lpfc_sli_abort_fcp_cmpl() routine. Thus, remove extraneous lpfc_sli4_abort_fcp_cmpl() prototype declaration. - lpfc_nvme_abort_fcreq_cmpl() abort completion routine is called with a mismatched argument type. This may result in misleading log message content. Update to the correct argument type of lpfc_iocbq instead of lpfc_wcqe_complete. The lpfc_wcqe_complete should be derived from the lpfc_iocbq structure. Link: https://lore.kernel.org/r/[email protected] Fixes: 31a59f75702f ("scsi: lpfc: SLI path split: Refactor Abort paths") Cc: <[email protected]> # v5.18 Co-developed-by: Justin Tee <[email protected]> Signed-off-by: Justin Tee <[email protected]> Signed-off-by: James Smart <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-06-07scsi: lpfc: Correct BDE type for XMIT_SEQ64_WQE in lpfc_ct_reject_event()James Smart1-1/+1
A previous commit assumed all XMIT_SEQ64_WQEs are prepped with the correct BDE type in word 0-2. However, lpfc_ct_reject_event() routine was missed and is still filling out the incorrect BDE type. Fix lpfc_ct_reject_event() routine so that type BUFF_TYPE_BDE_64 is set instead of BUFF_TYPE_BLP_64. Link: https://lore.kernel.org/r/[email protected] Fixes: 596fc8adb171 ("scsi: lpfc: Fix dmabuf ptr assignment in lpfc_ct_reject_event()") Co-developed-by: Justin Tee <[email protected]> Signed-off-by: Justin Tee <[email protected]> Signed-off-by: James Smart <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-06-07scsi: vmw_pvscsi: Expand vcpuHint to 16 bitsWentao Wang1-2/+2
vcpuHint has been expanded to 16 bit on host to enable routing to more CPUs. Guest side should align with the change. This change has been tested with hosts with 8-bit and 16-bit vcpuHint, on both platforms host side can get correct value. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Wentao Wang <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-06-07scsi: sd: Fix interpretation of VPD B9h lengthTyler Erickson1-1/+1
Fixing the interpretation of the length of the B9h VPD page (Concurrent Positioning Ranges). Adding 4 is necessary as the first 4 bytes of the page is the header with page number and length information. Adding 3 was likely a misinterpretation of the SBC-5 specification which sets all offsets starting at zero. This fixes the error in dmesg: [ 9.014456] sd 1:0:0:0: [sda] Invalid Concurrent Positioning Ranges VPD page Link: https://lore.kernel.org/r/[email protected] Fixes: e815d36548f0 ("scsi: sd: add concurrent positioning ranges support") Cc: [email protected] Tested-by: Michael English <[email protected]> Reviewed-by: Muhammad Ahmad <[email protected]> Reviewed-by: Damien Le Moal <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Tyler Erickson <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-06-07Merge tag 'input-for-v5.19-rc1' of ↵Linus Torvalds3-3/+9
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - proper annotation of USB buffers in bcm5974 touchpad dirver - a quirk in SOC button driver to handle Lenovo Yoga Tablet2 1051F - a fix for missing dependency in raspberrypi-ts driver to avoid compile breakages with random configs. * tag 'input-for-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: soc_button_array - also add Lenovo Yoga Tablet2 1051F to dmi_use_low_level_irq Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flag Input: raspberrypi-ts - add missing HAS_IOMEM dependency
2022-06-07Merge tag 'mmc-v5.19-2' of ↵Linus Torvalds2-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Fix CQE recovery reset success for block I/O MMC host: - sdhci-pci-gli: Fix support for runtime resume - Fix unevaluatedProperties warnings in DT examples" * tag 'mmc-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: dt-bindings: mmc: Fix unevaluatedProperties warnings in examples mmc: block: Fix CQE recovery reset success mmc: sdhci-pci-gli: Fix GL9763E runtime PM when the system resumes from suspend
2022-06-07Input: soc_button_array - also add Lenovo Yoga Tablet2 1051F to ↵Marius Hoch1-2/+2
dmi_use_low_level_irq Commit 223f61b8c5ad ("Input: soc_button_array - add Lenovo Yoga Tablet2 1051L to the dmi_use_low_level_irq list") added the 1051L to this list already, but the same problem applies to the 1051F. As there are no further 1051 variants (just the F/L), we can just DMI match 1051. Tested on a Lenovo Yoga Tablet2 1051F: Without this patch the home-button stops working after a wakeup from suspend. Signed-off-by: Marius Hoch <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2022-06-07Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flagMathias Nyman1-1/+6
The bcm5974 driver does the allocation and dma mapping of the usb urb data buffer, but driver does not set the URB_NO_TRANSFER_DMA_MAP flag to let usb core know the buffer is already mapped. usb core tries to map the already mapped buffer, causing a warning: "xhci_hcd 0000:00:14.0: rejecting DMA map of vmalloc memory" Fix this by setting the URB_NO_TRANSFER_DMA_MAP, letting usb core know buffer is already mapped by bcm5974 driver Signed-off-by: Mathias Nyman <[email protected]> Cc: [email protected] Link: https://bugzilla.kernel.org/show_bug.cgi?id=215890 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2022-06-07drm/amdgpu: Add MODE register to wave debug info in gfx11Joseph Greathouse1-0/+1
All other chips, from gfx6-gfx10, now include the MODE register at the end of the wave debug state. This appears to have been missed in gfx11, so this patch adds in MODE to the debug state for gfx11. Signed-off-by: Joseph Greathouse <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-06-07Revert "drm/amd/display: Pass the new context into disable OTG WA"Nicholas Kazlauskas3-12/+12
This reverts commit 8440f57532496d398a461887e56ca6f45089fbcf. Causes a hang when hotplugging DP, shutting down system, or enabling dual eDP. Reviewed-by: Dmytro Laktyushkin <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-06-07Revert "drm/amdgpu: Ensure the DMA engine is deactivated during set ups"Guchun Chen1-64/+45
This reverts commit b992a19085885c096b19625a85c674cb89829ca1. This causes regression in GPU reset related test. Cc: Alexander Deucher <[email protected]> Cc: [email protected] Signed-off-by: Guchun Chen <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-06-07drm/msm: Fix double pm_runtime_disable() callMaximilian Luz1-1/+2
Following commit 17e822f7591f ("drm/msm: fix unbalanced pm_runtime_enable in adreno_gpu_{init, cleanup}"), any call to adreno_unbind() will disable runtime PM twice, as indicated by the call trees below: adreno_unbind() -> pm_runtime_force_suspend() -> pm_runtime_disable() adreno_unbind() -> gpu->funcs->destroy() [= aNxx_destroy()] -> adreno_gpu_cleanup() -> pm_runtime_disable() Note that pm_runtime_force_suspend() is called right before gpu->funcs->destroy() and both functions are called unconditionally. With recent addition of the eDP AUX bus code, this problem manifests itself when the eDP panel cannot be found yet and probing is deferred. On the first probe attempt, we disable runtime PM twice as described above. This then causes any later probe attempt to fail with [drm:adreno_load_gpu [msm]] *ERROR* Couldn't power up the GPU: -13 preventing the driver from loading. As there seem to be scenarios where the aNxx_destroy() functions are not called from adreno_unbind(), simply removing pm_runtime_disable() from inside adreno_unbind() does not seem to be the proper fix. This is what commit 17e822f7591f ("drm/msm: fix unbalanced pm_runtime_enable in adreno_gpu_{init, cleanup}") intended to fix. Therefore, instead check whether runtime PM is still enabled, and only disable it in that case. Fixes: 17e822f7591f ("drm/msm: fix unbalanced pm_runtime_enable in adreno_gpu_{init, cleanup}") Signed-off-by: Maximilian Luz <[email protected]> Tested-by: Bjorn Andersson <[email protected]> Reviewed-by: Rob Clark <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Clark <[email protected]>
2022-06-07regulator: qcom_smd: correct MP5496 rangesRobert Marko1-4/+4
Currently set MP5496 Buck and LDO ranges dont match its datasheet[1]. According to the datasheet: Buck range is 0.6-2.1875V with a 12.5mV step LDO range is 0.8-3.975V with a 25mV step. So, correct the ranges according to the datasheet[1]. [1] https://www.monolithicpower.com/en/documentview/productdocument/index/version/2/document_type/Datasheet/lang/en/sku/MP5496GR/document_id/6906/ Signed-off-by: Robert Marko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-06-07ixgbe: fix unexpected VLAN Rx in promisc mode on VFOlivier Matz1-2/+2
When the promiscuous mode is enabled on a VF, the IXGBE_VMOLR_VPE bit (VLAN Promiscuous Enable) is set. This means that the VF will receive packets whose VLAN is not the same than the VLAN of the VF. For instance, in this situation: ┌────────┐ ┌────────┐ ┌────────┐ │ │ │ │ │ │ │ │ │ │ │ │ │ VF0├────┤VF1 VF2├────┤VF3 │ │ │ │ │ │ │ └────────┘ └────────┘ └────────┘ VM1 VM2 VM3 vf 0: vlan 1000 vf 1: vlan 1000 vf 2: vlan 1001 vf 3: vlan 1001 If we tcpdump on VF3, we see all the packets, even those transmitted on vlan 1000. This behavior prevents to bridge VF1 and VF2 in VM2, because it will create a loop: packets transmitted on VF1 will be received by VF2 and vice-versa, and bridged again through the software bridge. This patch remove the activation of VLAN Promiscuous when a VF enables the promiscuous mode. However, the IXGBE_VMOLR_UPE bit (Unicast Promiscuous) is kept, so that a VF receives all packets that has the same VLAN, whatever the destination MAC address. Fixes: 8443c1a4b192 ("ixgbe, ixgbevf: Add new mbox API xcast mode") Cc: [email protected] Cc: Nicolas Dichtel <[email protected]> Signed-off-by: Olivier Matz <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-06-07ixgbe: fix bcast packets Rx on VF after promisc removalOlivier Matz1-2/+2
After a VF requested to remove the promiscuous flag on an interface, the broadcast packets are not received anymore. This breaks some protocols like ARP. In ixgbe_update_vf_xcast_mode(), we should keep the IXGBE_VMOLR_BAM bit (Broadcast Accept) on promiscuous removal. This flag is already set by default in ixgbe_set_vmolr() on VF reset. Fixes: 8443c1a4b192 ("ixgbe, ixgbevf: Add new mbox API xcast mode") Cc: [email protected] Cc: Nicolas Dichtel <[email protected]> Signed-off-by: Olivier Matz <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-06-07hwmon: (occ) Lock mutex in shutdown to prevent race with occ_activeEddie James1-0/+5
Unbinding the driver or removing the parent device at the same time as using the OCC active sysfs file can cause the driver to unregister the hwmon device twice. Prevent this by locking the occ mutex in the shutdown function. Signed-off-by: Eddie James <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2022-06-07parisc/stifb: Fix fb_is_primary_device() only available with CONFIG_FB_STIHelge Deller1-0/+2
Fix this build error noticed by the kernel test robot: drivers/video/console/sticore.c:1132:5: error: redefinition of 'fb_is_primary_device' arch/parisc/include/asm/fb.h:18:19: note: previous definition of 'fb_is_primary_device' Signed-off-by: Helge Deller <[email protected]> Reported-by: kernel test robot <[email protected]> Cc: [email protected] # v5.10+
2022-06-07stmmac: intel: Fix an error handling path in intel_eth_pci_probe()Christophe JAILLET1-3/+1
When the managed API is used, there is no need to explicitly call pci_free_irq_vectors(). This looks to be a left-over from the commit in the Fixes tag. Only the .remove() function had been updated. So remove this unused function call and update goto label accordingly. Fixes: 8accc467758e ("stmmac: intel: use managed PCI function on probe and resume") Signed-off-by: Christophe JAILLET <[email protected]> Reviewed-by: Wong Vee Khee <[email protected]> Link: https://lore.kernel.org/r/1ac9b6787b0db83b0095711882c55c77c8ea8da0.1654462241.git.christophe.jaillet@wanadoo.fr Signed-off-by: Paolo Abeni <[email protected]>
2022-06-07RDMA/qedr: Fix reporting QP timeout attributeKamal Heib2-1/+4
Make sure to save the passed QP timeout attribute when the QP gets modified, so when calling query QP the right value is reported and not the converted value that is required by the firmware. This issue was found while running the pyverbs tests. Fixes: cecbcddf6461 ("qedr: Add support for QP verbs") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Kamal Heib <[email protected]> Acked-by: Michal Kalderon <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]>
2022-06-07xen: unexport __init-annotated xen_xlate_map_ballooned_pages()Masahiro Yamada1-1/+0
EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because none of the in-tree call-sites (arch/arm/xen/enlighten.c, arch/x86/xen/grant-table.c) is compiled as modular. Fixes: 243848fc018c ("xen/grant-table: Move xlated_setup_gnttab_pages to common place") Reported-by: Stephen Rothwell <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]> Reviewed-by: Oleksandr Tyshchenko <[email protected]> Acked-by: Stefano Stabellini <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2022-06-06net: ethernet: bgmac: Fix refcount leak in bcma_mdio_mii_registerMiaoqian Lin1-0/+1
of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: 55954f3bfdac ("net: ethernet: bgmac: move BCMA MDIO Phy code into a separate file") Signed-off-by: Miaoqian Lin <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-06amt: fix wrong type string definitionTaehee Yoo1-0/+1
amt message type definition starts from 1, not 0. But type_str[] starts from 0. So, it prints wrong type information. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-06amt: fix possible null-ptr-deref in amt_rcv()Taehee Yoo1-1/+2
When amt interface receives amt message, it tries to obtain amt private data from sock. If there is no amt private data, it frees an skb immediately. After kfree_skb(), it increases the rx_dropped stats. But in order to use rx_dropped, amt private data is needed. So, it makes amt_rcv() to do not increase rx_dropped stats when it can not obtain amt private data. Reported-by: kernel test robot <[email protected]> Reported-by: Dan Carpenter <[email protected]> Fixes: 1a1a0e80e005 ("amt: fix possible memory leak in amt_rcv()") Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-06amt: fix wrong usage of pskb_may_pull()Taehee Yoo1-18/+37
It adds missing pskb_may_pull() in amt_update_handler() and amt_multicast_data_handler(). And it fixes wrong parameter of pskb_may_pull() in amt_advertisement_handler() and amt_membership_query_handler(). Reported-by: Jakub Kicinski <[email protected]> Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-06drm/atomic: Force bridge self-refresh-exit on CRTC switchBrian Norris1-3/+13
It's possible to change which CRTC is in use for a given connector/encoder/bridge while we're in self-refresh without fully disabling the connector/encoder/bridge along the way. This can confuse the bridge encoder/bridge, because (a) it needs to track the SR state (trying to perform "active" operations while the panel is still in SR can be Bad(TM)); and (b) it tracks the SR state via the CRTC state (and after the switch, the previous SR state is lost). Thus, we need to either somehow carry the self-refresh state over to the new CRTC, or else force an encoder/bridge self-refresh transition during such a switch. I choose the latter, so we disable the encoder (and exit PSR) before attaching it to the new CRTC (where we can continue to assume a clean (non-self-refresh) state). This fixes PSR issues seen on Rockchip RK3399 systems with drivers/gpu/drm/bridge/analogix/analogix_dp_core.c. Change in v2: - Drop "->enable" condition; this could possibly be "->active" to reflect the intended hardware state, but it also is a little over-specific. We want to make a transition through "disabled" any time we're exiting PSR at the same time as a CRTC switch. (Thanks Liu Ying) Cc: Liu Ying <[email protected]> Cc: <[email protected]> Fixes: 1452c25b0e60 ("drm: Add helpers to kick off self refresh mode in drivers") Signed-off-by: Brian Norris <[email protected]> Reviewed-by: Sean Paul <[email protected]> Signed-off-by: Douglas Anderson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20220228122522.v2.2.Ic15a2ef69c540aee8732703103e2cff51fb9c399@changeid
2022-06-06drm/bridge: analogix_dp: Support PSR-exit to disable transitionBrian Norris1-4/+38
Most eDP panel functions only work correctly when the panel is not in self-refresh. In particular, analogix_dp_bridge_disable() tends to hit AUX channel errors if the panel is in self-refresh. Given the above, it appears that so far, this driver assumes that we are never in self-refresh when it comes time to fully disable the bridge. Prior to commit 846c7dfc1193 ("drm/atomic: Try to preserve the crtc enabled state in drm_atomic_remove_fb, v2."), this tended to be true, because we would automatically disable the pipe when framebuffers were removed, and so we'd typically disable the bridge shortly after the last display activity. However, that is not guaranteed: an idle (self-refresh) display pipe may be disabled, e.g., when switching CRTCs. We need to exit PSR first. Stable notes: this is definitely a bugfix, and the bug has likely existed in some form for quite a while. It may predate the "PSR helpers" refactor, but the code looked very different before that, and it's probably not worth rewriting the fix. Cc: <[email protected]> Fixes: 6c836d965bad ("drm/rockchip: Use the helpers for PSR") Signed-off-by: Brian Norris <[email protected]> Reviewed-by: Sean Paul <[email protected]> Signed-off-by: Douglas Anderson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20220228122522.v2.1.I161904be17ba14526f78536ccd78b85818449b51@changeid
2022-06-06net: phy: dp83867: retrigger SGMII AN when link changeTan Tee Min1-0/+29
There is a limitation in TI DP83867 PHY device where SGMII AN is only triggered once after the device is booted up. Even after the PHY TPI is down and up again, SGMII AN is not triggered and hence no new in-band message from PHY to MAC side SGMII. This could cause an issue during power up, when PHY is up prior to MAC. At this condition, once MAC side SGMII is up, MAC side SGMII wouldn`t receive new in-band message from TI PHY with correct link status, speed and duplex info. As suggested by TI, implemented a SW solution here to retrigger SGMII Auto-Neg whenever there is a link change. v2: Add Fixes tag in commit message. Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy") Cc: <[email protected]> # 5.4.x Signed-off-by: Sit, Michael Wei Hong <[email protected]> Reviewed-by: Voon Weifeng <[email protected]> Signed-off-by: Tan Tee Min <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.