aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2019-07-17Merge tag 'hwlock-v5.3' of git://github.com/andersson/remoteprocLinus Torvalds4-14/+47
Pull hwspinlock updates from Bjorn Andersson: "This contains support for hardware spinlock TI K3 AM65x and J721E family of SoCs, support for using hwspinlocks from atomic context and better error reporting when dealing with hardware disabled in DeviceTree" * tag 'hwlock-v5.3' of git://github.com/andersson/remoteproc: hwspinlock: add the 'in_atomic' API hwspinlock: document the hwspinlock 'raw' API hwspinlock: stm32: implement the relax() ops hwspinlock: ignore disabled device hwspinlock/omap: Add a trace during probe hwspinlock/omap: Add support for TI K3 SoCs dt-bindings: hwlock: Update OMAP binding for TI K3 SoCs
2019-07-17Merge tag 'rproc-v5.3' of git://github.com/andersson/remoteprocLinus Torvalds10-36/+842
Pull remoteproc updates from Bjorn Andersson: "This adds support for the STM32 remoteproc, additional i.MX platforms with Cortex M4 remoteprocs and Qualcomm's QCS404 Compute DSP. Also initial support for vendor specific resource table entries and support for unprocessed Qualcomm firmware files" * tag 'rproc-v5.3' of git://github.com/andersson/remoteproc: remoteproc: stm32: fix building without ARM SMCC remoteproc: qcom: q6v5-mss: Fix build error without QCOM_MDT_LOADER remoteproc: copy parent dma_pfn_offset for vdev remoteproc: qcom: q6v5-mss: Support loading non-split images soc: qcom: mdt_loader: Support loading non-split images remoteproc: stm32: add an ST stm32_rproc driver dt-bindings: remoteproc: add bindings for stm32 remote processor driver dt-bindings: stm32: add bindings for ML-AHB interconnect remoteproc: Use struct_size() helper remoteproc: add vendor resources handling remoteproc: imx: Fix typo in "failed" remoteproc: imx: Broaden the Kconfig selection logic remoteproc,rpmsg: add missing MAINTAINERS file entries remoteproc: qcom: qdsp6-adsp: Add support for QCS404 CDSP dt-bindings: remoteproc: Rename and amend Hexagon v56 binding
2019-07-17Merge tag 'rpmsg-v5.3' of git://github.com/andersson/remoteprocLinus Torvalds1-1/+2
Pull rpmsg updates from Bjorn Andersson: "This contains a DT binding update and a change to make the remote function of rpmsg_devices optional" * tag 'rpmsg-v5.3' of git://github.com/andersson/remoteproc: rpmsg: core: Make remove handler for rpmsg driver optional. dt-bindings: soc: qcom: Add remote-pid binding for GLINK SMEM
2019-07-17Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds10-131/+1963
Pull virtio, vhost updates from Michael Tsirkin: "Fixes, features, performance: - new iommu device - vhost guest memory access using vmap (just meta-data for now) - minor fixes" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio-mmio: add error check for platform_get_irq scsi: virtio_scsi: Use struct_size() helper iommu/virtio: Add event queue iommu/virtio: Add probe request iommu: Add virtio-iommu driver PCI: OF: Initialize dev->fwnode appropriately of: Allow the iommu-map property to omit untranslated devices dt-bindings: virtio: Add virtio-pci-iommu node dt-bindings: virtio-mmio: Add IOMMU description vhost: fix clang build warning vhost: access vq metadata through kernel virtual address vhost: factor out setting vring addr and num vhost: introduce helpers to get the size of metadata area vhost: rename vq_iotlb_prefetch() to vq_meta_prefetch() vhost: fine grain userspace memory accessors vhost: generalize adding used elem
2019-07-17Merge tag 'vfio-v5.3-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds2-2/+10
Pull VFIO updates from Alex Williamson: - Static symbol cleanup in mdev samples (Kefeng Wang) - Use vma help in nvlink code (Peng Hao) - Remove unused code in mbochs sample (YueHaibing) - Send uevents around mdev registration (Alex Williamson) * tag 'vfio-v5.3-rc1' of git://github.com/awilliam/linux-vfio: mdev: Send uevents around parent device registration sample/mdev/mbochs: remove set but not used variable 'mdev_state' vfio: vfio_pci_nvlink2: use a vma helper function vfio-mdev/samples: make some symbols static
2019-07-17Merge tag 'clk-for-linus' of ↵Linus Torvalds116-3086/+7136
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This round of clk driver and framework updates is heavy on the driver update side. The two main highlights in the core framework are the addition of an bulk clk_get API that handles optional clks and an extra debugfs file that tells the developer about the current parent of a clk. The driver updates are dominated by i.MX in the diffstat, but that is mostly because that SoC has started converting to the clk_hw style of clk registration. The next big update is in the Amlogic meson clk driver that gained some support for audio, cpu, and temperature clks while fixing some PLL issues. Finally, the biggest thing that stands out is the conversion of a large part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses less strings and more pointer comparisons to match clk parents and children up. In general, it looks like we have a lot of little fixes and tweaks here and there to clk data along with the normal addition of a handful of new drivers and a couple new core framework features. Core: - Add a 'clk_parent' file in clk debugfs - Add a clk_bulk_get_optional() API (with devm too) New Drivers: - Support gated clk controller on MIPS based BCM63XX SoCs - Support SiLabs Si5341 and Si5340 chips - Support for CPU clks on Raspberry Pi devices - Audsys clock driver for MediaTek MT8516 SoCs Updates: - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme - Small frequency support for SiLabs Si544 chips - Slow clk support for AT91 SAM9X60 SoCs - Remove dead code in various clk drivers (-Wunused) - Support for Marvell 98DX1135 SoCs - Get duty cycle of generic pwm clks - Improvement in mmc phase calculation and cleanup of some rate defintions - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs - Add GPIO, SNVS and GIC clocks for i.MX8 drivers - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting - Add clks for new Exynos5422 Dynamic Memory Controller driver - Clock definition for Exynos4412 Mali - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3 - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs - TI clock probing done from DT by default instead of firmware - Fix Amlogic Meson mpll fractional part and spread sprectrum issues - Add Amlogic meson8 audio clocks - Add Amlogic g12a temperature sensors clocks - Add Amlogic g12a and g12b cpu clocks - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W - Add Clock Domain support on Renesas RZ/N1" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits) clk: consoldiate the __clk_get_hw() declarations clk: sprd: Add check for return value of sprd_clk_regmap_init() clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK clk: Add Si5341/Si5340 driver dt-bindings: clock: Add silabs,si5341 clk: clk-si544: Implement small frequency change support clk: add BCM63XX gated clock controller driver devicetree: document the BCM63XX gated clock bindings clk: at91: sckc: use dedicated functions to unregister clock clk: at91: sckc: improve error path for sama5d4 sck registration clk: at91: sckc: remove unnecessary line clk: at91: sckc: improve error path for sam9x5 sck register clk: at91: sckc: add support to free slow clock osclillator clk: at91: sckc: add support to free slow rc oscillator clk: at91: sckc: add support to free slow oscillator clk: rockchip: export HDMIPHY clock on rk3228 clk: rockchip: add watchdog pclk on rk3328 clk: rockchip: add clock id for hdmi_phy special clock on rk3228 clk: rockchip: add clock id for watchdog pclk on rk3328 clk: at91: sckc: add support for SAM9X60 ...
2019-07-17Merge tag 'rtc-5.3' of ↵Linus Torvalds20-433/+501
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "A quiet cycle this time. - ds1307: properly handle oscillator failure flags - imx-sc: alarm support - pcf2123: alarm support, correct offset handling - sun6i: add R40 support - simplify getting the adapter of an i2c client" * tag 'rtc-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (37 commits) rtc: wm831x: Add IRQF_ONESHOT flag rtc: stm32: remove one condition check in stm32_rtc_set_alarm() rtc: pcf2123: Fix build error rtc: interface: Change type of 'count' from int to u64 rtc: pcf8563: Clear event flags and disable interrupts before requesting irq rtc: pcf8563: Fix interrupt trigger method rtc: pcf2123: fix negative offset rounding rtc: pcf2123: add alarm support rtc: pcf2123: use %ptR rtc: pcf2123: port to regmap rtc: pcf2123: remove sysfs register view rtc: rx8025: simplify getting the adapter of a client rtc: rx8010: simplify getting the adapter of a client rtc: rv8803: simplify getting the adapter of a client rtc: m41t80: simplify getting the adapter of a client rtc: fm3130: simplify getting the adapter of a client rtc: tegra: Drop MODULE_ALIAS rtc: sun6i: Add R40 compatible dt-bindings: rtc: sun6i: Add the R40 RTC compatible dt-bindings: rtc: Convert Allwinner A31 RTC to a schema ...
2019-07-17Merge tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds53-693/+3470
Pull dmaengine updates from Vinod Koul: - Add support in dmaengine core to do device node checks for DT devices and update bunch of drivers to use that and remove open coding from drivers - New driver/driver support for new hardware, namely: - MediaTek UART APDMA - Freescale i.mx7ulp edma2 - Synopsys eDMA IP core version 0 - Allwinner H6 DMA - Updates to axi-dma and support for interleaved cyclic transfers - Greg's debugfs return value check removals on drivers - Updates to stm32-dma, hsu, dw, pl330, tegra drivers * tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits) dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support" dmaengine: at_xdmac: check for non-empty xfers_list before invoking callback Documentation: dmaengine: clean up description of dmatest usage dmaengine: tegra210-adma: remove PM_CLK dependency dmaengine: fsl-edma: add i.mx7ulp edma2 version support dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma dmaengine: fsl-edma-common: version check for v2 instead dmaengine: fsl-edma-common: move dmamux register to another single function dmaengine: fsl-edma: add drvdata for fsl-edma dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver" dmaengine: rcar-dmac: Reject zero-length slave DMA requests dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart Lake dmaengine: dw-edma: fix semicolon.cocci warnings dmaengine: sh: usb-dmac: Use [] to denote a flexible array member dmaengine: dmatest: timeout value of -1 should specify infinite wait dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bit dmaengine: fsl-edma: support little endian for edma driver dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width" dmagengine: pl330: add code to get reset property dt-bindings: pl330: document the optional resets property ...
2019-07-17Merge tag 'mips_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds2-1/+2
Pull MIPS updates from Paul Burton: "A light batch this time around but significant improvements for certain systems: - Removal of readq & writeq for MIPS32 kernels where they would simply BUG() anyway, allowing drivers or other code that #ifdefs on their presence to work properly. - Improvements for Ingenic JZ4740 systems, including support for the external memory controller & pinmuxing fixes for qi_lb60/NanoNote systems. - Improvements for Lantiq systems, in particular around SMP & IPIs. - DT updates for ralink/MediaTek MT7628a systems to probe & configure a bunch more devices. - Miscellaneous cleanups & build fixes" * tag 'mips_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (30 commits) MIPS: fix some more fall through errors in arch/mips MIPS: perf events: handle switch statement falling through warnings mips/kprobes: Export kprobe_fault_handler() MAINTAINERS: Add myself as Ingenic SoCs maintainer MIPS: ralink: mt7628a.dtsi: Add watchdog controller DT node MIPS: ralink: mt7628a.dtsi: Add SPI controller DT node MIPS: ralink: mt7628a.dtsi: Add GPIO controller DT node MIPS: ralink: mt7628a.dtsi: Add pinctrl DT properties to the UART nodes MIPS: ralink: mt7628a.dtsi: Add pinmux DT node MIPS: ralink: mt7628a.dtsi: Add SPDX GPL-2.0 license identifier MIPS: lantiq: Add SMP support for lantiq interrupt controller MIPS: lantiq: Shorten register names, remove unused macros MIPS: lantiq: Fix bitfield masking MIPS: lantiq: Remove unused macros MIPS: lantiq: Fix attributes of of_device_id structure MIPS: lantiq: Change variables to the same type as the source MIPS: lantiq: Move macro directly to iomem function mips: Remove q-accessors from non-64bit platforms FDDI: defza: Include linux/io-64-nonatomic-lo-hi.h MIPS: configs: Remove useless UEVENT_HELPER_PATH ...
2019-07-17platform/x86: asus: Rename "fan mode" to "fan boost mode"Daniel Drake1-56/+62
The Asus WMI spec indicates that the function being controlled here is called "Fan Boost Mode". The user-facing documentation also calls it this. The spec uses the term "fan mode" is used to refer to other things, including functionality expected to appear on future products. We missed this before as we are not dealing with the most readable of specs, and didn't forsee any confusion around shortening the name. Rename "fan mode" to "fan boost mode" to improve consistency with the spec and to avoid a future naming conflict. There is no interface breakage here since this has yet to be included in an official kernel release. I also updated the kernel version listed under ABI accordingly. Signed-off-by: Daniel Drake <drake@endlessm.com> Acked-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-07-17Merge branch 'akpm' (patches from Andrew)Linus Torvalds8-119/+65
Merge more updates from Andrew Morton: "VM: - z3fold fixes and enhancements by Henry Burns and Vitaly Wool - more accurate reclaimed slab caches calculations by Yafang Shao - fix MAP_UNINITIALIZED UAPI symbol to not depend on config, by Christoph Hellwig - !CONFIG_MMU fixes by Christoph Hellwig - new novmcoredd parameter to omit device dumps from vmcore, by Kairui Song - new test_meminit module for testing heap and pagealloc initialization, by Alexander Potapenko - ioremap improvements for huge mappings, by Anshuman Khandual - generalize kprobe page fault handling, by Anshuman Khandual - device-dax hotplug fixes and improvements, by Pavel Tatashin - enable synchronous DAX fault on powerpc, by Aneesh Kumar K.V - add pte_devmap() support for arm64, by Robin Murphy - unify locked_vm accounting with a helper, by Daniel Jordan - several misc fixes core/lib: - new typeof_member() macro including some users, by Alexey Dobriyan - make BIT() and GENMASK() available in asm, by Masahiro Yamada - changed LIST_POISON2 on x86_64 to 0xdead000000000122 for better code generation, by Alexey Dobriyan - rbtree code size optimizations, by Michel Lespinasse - convert struct pid count to refcount_t, by Joel Fernandes get_maintainer.pl: - add --no-moderated switch to skip moderated ML's, by Joe Perches misc: - ptrace PTRACE_GET_SYSCALL_INFO interface - coda updates - gdb scripts, various" [ Using merge message suggestion from Vlastimil Babka, with some editing - Linus ] * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (100 commits) fs/select.c: use struct_size() in kmalloc() mm: add account_locked_vm utility function arm64: mm: implement pte_devmap support mm: introduce ARCH_HAS_PTE_DEVMAP mm: clean up is_device_*_page() definitions mm/mmap: move common defines to mman-common.h mm: move MAP_SYNC to asm-generic/mman-common.h device-dax: "Hotremove" persistent memory that is used like normal RAM mm/hotplug: make remove_memory() interface usable device-dax: fix memory and resource leak if hotplug fails include/linux/lz4.h: fix spelling and copy-paste errors in documentation ipc/mqueue.c: only perform resource calculation if user valid include/asm-generic/bug.h: fix "cut here" for WARN_ON for __WARN_TAINT architectures scripts/gdb: add helpers to find and list devices scripts/gdb: add lx-genpd-summary command drivers/pps/pps.c: clear offset flags in PPS_SETPARAMS ioctl kernel/pid.c: convert struct pid count to refcount_t drivers/rapidio/devices/rio_mport_cdev.c: NUL terminate some strings select: shift restore_saved_sigmask_unless() into poll_select_copy_remaining() select: change do_poll() to return -ERESTARTNOHAND rather than -EINTR ...
2019-07-17dm kcopyd: Increase default sub-job size to 512KBNikos Tsironis1-6/+28
Currently, kcopyd has a sub-job size of 64KB and a maximum number of 8 sub-jobs. As a result, for any kcopyd job, we have a maximum of 512KB of I/O in flight. This upper limit to the amount of in-flight I/O under-utilizes fast devices and results in decreased throughput, e.g., when writing to a snapshotted thin LV with I/O size less than the pool's block size (so COW is performed using kcopyd). Increase kcopyd's default sub-job size to 512KB, so we have a maximum of 4MB of I/O in flight for each kcopyd job. This results in an up to 96% improvement of bandwidth when writing to a snapshotted thin LV, with I/O sizes less than the pool's block size. Also, add dm_mod.kcopyd_subjob_size_kb module parameter to allow users to fine tune the sub-job size of kcopyd. The default value of this parameter is 512KB and the maximum allowed value is 1024KB. We evaluate the performance impact of the change by running the snap_breaking_throughput benchmark, from the device mapper test suite [1]. The benchmark: 1. Creates a 1G thin LV 2. Provisions the thin LV 3. Takes a snapshot of the thin LV 4. Writes to the thin LV with: dd if=/dev/zero of=/dev/vg/thin_lv oflag=direct bs=<I/O size> Running this benchmark with various thin pool block sizes and dd I/O sizes (all combinations triggering the use of kcopyd) we get the following results: +-----------------+-------------+------------------+-----------------+ | Pool block size | dd I/O size | BW before (MB/s) | BW after (MB/s) | +-----------------+-------------+------------------+-----------------+ | 1 MB | 256 KB | 242 | 280 | | 1 MB | 512 KB | 238 | 295 | | | | | | | 2 MB | 256 KB | 238 | 354 | | 2 MB | 512 KB | 241 | 380 | | 2 MB | 1 MB | 245 | 394 | | | | | | | 4 MB | 256 KB | 248 | 412 | | 4 MB | 512 KB | 234 | 432 | | 4 MB | 1 MB | 251 | 474 | | 4 MB | 2 MB | 257 | 504 | | | | | | | 8 MB | 256 KB | 239 | 420 | | 8 MB | 512 KB | 256 | 431 | | 8 MB | 1 MB | 264 | 467 | | 8 MB | 2 MB | 264 | 502 | | 8 MB | 4 MB | 281 | 537 | +-----------------+-------------+------------------+-----------------+ [1] https://github.com/jthornber/device-mapper-test-suite Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-07-17dm snapshot: fix oversights in optional discard supportMike Snitzer1-0/+10
__find_snapshots_sharing_cow() should always be used with _origins_lock held so fix snapshot_io_hints() accordingly. Also, once a snapshot is being merged discards must not be allowed -- otherwise incorrect or duplicate work will be performed. Fixes: 2e6023850e177d ("dm snapshot: add optional discard support features") Reported-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-07-17dm zoned: fix zone state management raceDamien Le Moal2-28/+24
dm-zoned uses the zone flag DMZ_ACTIVE to indicate that a zone of the backend device is being actively read or written and so cannot be reclaimed. This flag is set as long as the zone atomic reference counter is not 0. When this atomic is decremented and reaches 0 (e.g. on BIO completion), the active flag is cleared and set again whenever the zone is reused and BIO issued with the atomic counter incremented. These 2 operations (atomic inc/dec and flag set/clear) are however not always executed atomically under the target metadata mutex lock and this causes the warning: WARN_ON(!test_bit(DMZ_ACTIVE, &zone->flags)); in dmz_deactivate_zone() to be displayed. This problem is regularly triggered with xfstests generic/209, generic/300, generic/451 and xfs/077 with XFS being used as the file system on the dm-zoned target device. Similarly, xfstests ext4/303, ext4/304, generic/209 and generic/300 trigger the warning with ext4 use. This problem can be easily fixed by simply removing the DMZ_ACTIVE flag and managing the "ACTIVE" state by directly looking at the reference counter value. To do so, the functions dmz_activate_zone() and dmz_deactivate_zone() are changed to inline functions respectively calling atomic_inc() and atomic_dec(), while the dmz_is_active() macro is changed to an inline function calling atomic_read(). Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Reported-by: Masato Suzuki <masato.suzuki@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-07-17xen: remove tmem driverJuergen Gross5-1025/+0
The Xen tmem (transcendent memory) driver can be removed, as the related Xen hypervisor feature never made it past the "experimental" state and will be removed in future Xen versions (>= 4.13). The xen-selfballoon driver depends on tmem, so it can be removed, too. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-07-17xen/events: fix binding user event channels to cpusJuergen Gross2-3/+11
When binding an interdomain event channel to a vcpu via IOCTL_EVTCHN_BIND_INTERDOMAIN not only the event channel needs to be bound, but the affinity of the associated IRQi must be changed, too. Otherwise the IRQ and the event channel won't be moved to another vcpu in case the original vcpu they were bound to is going offline. Cc: <stable@vger.kernel.org> # 4.13 Fixes: c48f64ab472389df ("xen-evtchn: Bind dyn evtchn:qemu-dm interrupt to next online VCPU") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-07-16virtio_pmem: fix sparse warningPankaj Gupta1-2/+2
This patch fixes below sparse warning related to __virtio type in virtio pmem driver. This is reported by Intel test bot on linux-next tree. nd_virtio.c:56:28: warning: incorrect type in assignment (different base types) nd_virtio.c:56:28: expected unsigned int [unsigned] [usertype] type nd_virtio.c:56:28: got restricted __virtio32 nd_virtio.c:93:59: warning: incorrect type in argument 2 (different base types) nd_virtio.c:93:59: expected restricted __virtio32 [usertype] val nd_virtio.c:93:59: got unsigned int [unsigned] [usertype] ret Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Pankaj Gupta <pagupta@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-07-16mm: add account_locked_vm utility functionDaniel Jordan3-113/+11
locked_vm accounting is done roughly the same way in five places, so unify them in a helper. Include the helper's caller in the debug print to distinguish between callsites. Error codes stay the same, so user-visible behavior does too. The one exception is that the -EPERM case in tce_account_locked_vm is removed because Alexey has never seen it triggered. [daniel.m.jordan@oracle.com: v3] Link: http://lkml.kernel.org/r/20190529205019.20927-1-daniel.m.jordan@oracle.com [sfr@canb.auug.org.au: fix mm/util.c] Link: http://lkml.kernel.org/r/20190524175045.26897-1-daniel.m.jordan@oracle.com Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Cc: Alan Tull <atull@kernel.org> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Christoph Lameter <cl@linux.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Moritz Fischer <mdf@kernel.org> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Steve Sistare <steven.sistare@oracle.com> Cc: Wu Hao <hao.wu@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16device-dax: "Hotremove" persistent memory that is used like normal RAMPavel Tatashin2-4/+39
It is now allowed to use persistent memory like a regular RAM, but currently there is no way to remove this memory until machine is rebooted. This work expands the functionality to also allows hotremoving previously hotplugged persistent memory, and recover the device for use for other purposes. To hotremove persistent memory, the management software must first offline all memory blocks of dax region, and than unbind it from device-dax/kmem driver. So, operations should look like this: echo offline > /sys/devices/system/memory/memoryN/state ... echo dax0.0 > /sys/bus/dax/drivers/kmem/unbind Note: if unbind is done without offlining memory beforehand, it won't be possible to do dax0.0 hotremove, and dax's memory is going to be part of System RAM until reboot. Link: http://lkml.kernel.org/r/20190517215438.6487-4-pasha.tatashin@soleen.com Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Sasha Levin <sashal@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16device-dax: fix memory and resource leak if hotplug failsPavel Tatashin1-1/+4
Patch series ""Hotremove" persistent memory", v6. Recently, adding a persistent memory to be used like a regular RAM was added to Linux. This work extends this functionality to also allow hot removing persistent memory. We (Microsoft) have an important use case for this functionality. The requirement is for physical machines with small amount of RAM (~8G) to be able to reboot in a very short period of time (<1s). Yet, there is a userland state that is expensive to recreate (~2G). The solution is to boot machines with 2G preserved for persistent memory. Copy the state, and hotadd the persistent memory so machine still has all 8G available for runtime. Before reboot, offline and hotremove device-dax 2G, copy the memory that is needed to be preserved to pmem0 device, and reboot. The series of operations look like this: 1. After boot restore /dev/pmem0 to ramdisk to be consumed by apps. and free ramdisk. 2. Convert raw pmem0 to devdax ndctl create-namespace --mode devdax --map mem -e namespace0.0 -f 3. Hotadd to System RAM echo dax0.0 > /sys/bus/dax/drivers/device_dax/unbind echo dax0.0 > /sys/bus/dax/drivers/kmem/new_id echo online_movable > /sys/devices/system/memoryXXX/state 4. Before reboot hotremove device-dax memory from System RAM echo offline > /sys/devices/system/memoryXXX/state echo dax0.0 > /sys/bus/dax/drivers/kmem/unbind 5. Create raw pmem0 device ndctl create-namespace --mode raw -e namespace0.0 -f 6. Copy the state that was stored by apps to ramdisk to pmem device 7. Do kexec reboot or reboot through firmware if firmware does not zero memory in pmem0 region (These machines have only regular volatile memory). So to have pmem0 device either memmap kernel parameter is used, or devices nodes in dtb are specified. This patch (of 3): When add_memory() fails, the resource and the memory should be freed. Link: http://lkml.kernel.org/r/20190517215438.6487-2-pasha.tatashin@soleen.com Fixes: c221c0b0308f ("device-dax: "Hotplug" persistent memory for use like normal RAM") Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: James Morris <jmorris@namei.org> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Sasha Levin <sashal@kernel.org> Cc: Takashi Iwai <tiwai@suse.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16drivers/pps/pps.c: clear offset flags in PPS_SETPARAMS ioctlMiroslav Lichvar1-0/+8
The PPS assert/clear offset corrections are set by the PPS_SETPARAMS ioctl in the pps_ktime structs, which also contain flags. The flags are not initialized by applications (using the timepps.h header) and they are not used by the kernel for anything except returning them back in the PPS_GETPARAMS ioctl. Set the flags to zero to make it clear they are unused and avoid leaking uninitialized data of the PPS_SETPARAMS caller to other applications that have a read access to the PPS device. Link: http://lkml.kernel.org/r/20190702092251.24303-1-mlichvar@redhat.com Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Cc: Greg KH <greg@kroah.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16drivers/rapidio/devices/rio_mport_cdev.c: NUL terminate some stringsDan Carpenter1-0/+2
The dev_info.name[] array has space for RIO_MAX_DEVNAME_SZ + 1 characters. But the problem here is that we don't ensure that the user put a NUL terminator on the end of the string. It could lead to an out of bounds read. Link: http://lkml.kernel.org/r/20190529110601.GB19119@mwanda Fixes: e8de370188d0 ("rapidio: add mport char device driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Alexandre Bounine <alex.bou9@gmail.com> Cc: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16kernel: fix typos and some coding style in commentsWeitao Hou1-1/+1
fix lenght to length Link: http://lkml.kernel.org/r/20190521050937.4370-1-houweitaoo@gmail.com Signed-off-by: Weitao Hou <houweitaoo@gmail.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16be2net: Signal that the device cannot transmit during reconfigurationBenjamin Poirier1-1/+5
While changing the number of interrupt channels, be2net stops adapter operation (including netif_tx_disable()) but it doesn't signal that it cannot transmit. This may lead dev_watchdog() to falsely trigger during that time. Add the missing call to netif_carrier_off(), following the pattern used in many other drivers. netif_carrier_on() is already taken care of in be_open(). Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-16net: ethernet: mediatek: mtk_eth_soc: Add of_node_put() before gotoNishka Dasgupta1-1/+3
Each iteration of for_each_child_of_node puts the previous node, but in the case of a goto from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the goto. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-16net: ethernet: mscc: ocelot_board: Add of_node_put() before returnNishka Dasgupta1-1/+4
Each iteration of for_each_available_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return in two places. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-16net: ethernet: ti: cpsw: Add of_node_put() before return and breakNishka Dasgupta1-8/+18
Each iteration of for_each_available_child_of_node puts the previous node, but in the case of a return or break from the middle of the loop, there is no put, thus causing a memory leak. Hence, for function cpsw_probe_dt, create an extra label err_node_put that puts the last used node and returns ret; modify the return statements in the loop to save the return value in ret and goto this new label. For function cpsw_remove_dt, add an of_node_put before the break. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-16Merge tag 'docs/v5.3-1' of ↵Linus Torvalds37-50/+50
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull rst conversion of docs from Mauro Carvalho Chehab: "As agreed with Jon, I'm sending this big series directly to you, c/c him, as this series required a special care, in order to avoid conflicts with other trees" * tag 'docs/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (77 commits) docs: kbuild: fix build with pdf and fix some minor issues docs: block: fix pdf output docs: arm: fix a breakage with pdf output docs: don't use nested tables docs: gpio: add sysfs interface to the admin-guide docs: locking: add it to the main index docs: add some directories to the main documentation index docs: add SPDX tags to new index files docs: add a memory-devices subdir to driver-api docs: phy: place documentation under driver-api docs: serial: move it to the driver-api docs: driver-api: add remaining converted dirs to it docs: driver-api: add xilinx driver API documentation docs: driver-api: add a series of orphaned documents docs: admin-guide: add a series of orphaned documents docs: cgroup-v1: add it to the admin-guide book docs: aoe: add it to the driver-api book docs: add some documentation dirs to the driver-api book docs: driver-model: move it to the driver-api book docs: lp855x-driver.rst: add it to the driver-api book ...
2019-07-16Merge tag 'backlight-next-5.3' of ↵Linus Torvalds2-36/+17
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "New Functionality: - Provide support for ACPI enumeration; gpio_backlight Fix-ups: - SPDX fixups; pwm_bl - Fix linear brightness levels to include number available; pwm_bl" * tag 'backlight-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: pwm_bl: Fix heuristic to determine number of brightness levels backlight: gpio_backlight: Enable ACPI enumeration backlight: pwm_bl: Convert to use SPDX identifier
2019-07-16ACPI: video: Add new hw_changes_brightness quirk, set it on PB Easynote MZ35Hans de Goede1-0/+37
Some machines change the brightness themselves when a brightness hotkey gets pressed, despite us telling them not to. This causes the brightness to go two steps up / down when the hotkey is pressed. This is esp. a problem on older machines with only a few brightness levels. This commit adds a new hw_changes_brightness quirk which makes acpi_video_device_notify() only call backlight_force_update(..., BACKLIGHT_UPDATE_HOTKEY) and not do anything else, notifying userspace that the brightness was changed and leaving it at that fixing the dual step problem. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204077 Reported-by: Kacper Piwiński <cosiekvfj@o2.pl> Tested-by: Kacper Piwiński <cosiekvfj@o2.pl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-16Merge tag 'gpio-v5.3-rc1-fixes-for-linus' of ↵Linus Walleij3-20/+19
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes GPIO fixes for v5.3-rc1 - silence error messages on probe deferral in gpio-davinci - fix a memory leak in gpiolib-of - fix a potential use-after-free error in gpio-em
2019-07-16Revert "gpio/spi: Fix spi-gpio regression on active high CS"Linus Walleij1-8/+1
This reverts commit fbbf145a0e0a0177e089c52275fbfa55763e7d1d. It seems I was misguided in my fixup, which was working at the time but did not work on the final v5.2. The patch tried to avoid a quirk the gpiolib code not to treat "spi-gpio" CS gpios "special" by enforcing them to be active low, in the belief that since the "spi-gpio" driver was parsing the device tree on its own, it did not care to inspect the "spi-cs-high" attribute on the device nodes. That's wrong. The SPI core was inspecting them inside the of_spi_parse_dt() funtion and setting SPI_CS_HIGH on the nodes, and the driver inspected this flag when driving the line. As of now, the core handles the GPIO and it will consistently set the GPIO descriptor to 1 to enable CS, strictly requireing the gpiolib to invert it. And the gpiolib should indeed enforce active low on the CS line. Device trees should of course put the right flag on the GPIO handles, but it used to not matter. If we don't enforce active low on "gpio-gpio" we may run into ABI backward compatibility issues, so revert this. Cc: linux-spi@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20190715204529.9539-1-linus.walleij@linaro.org
2019-07-16cpufreq: Make cpufreq_generic_init() return voidViresh Kumar19-70/+45
It always returns 0 (success) and its return type should really be void. Over that, many drivers have added error handling code based on its return value, which is not required at all. Change its return type to void and update all the callers. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-15Merge tag 'for-linus-20190715' of git://git.kernel.dk/linux-blockLinus Torvalds22-114/+372
Pull more block updates from Jens Axboe: "A later pull request with some followup items. I had some vacation coming up to the merge window, so certain things items were delayed a bit. This pull request also contains fixes that came in within the last few days of the merge window, which I didn't want to push right before sending you a pull request. This contains: - NVMe pull request, mostly fixes, but also a few minor items on the feature side that were timing constrained (Christoph et al) - Report zones fixes (Damien) - Removal of dead code (Damien) - Turn on cgroup psi memstall (Josef) - block cgroup MAINTAINERS entry (Konstantin) - Flush init fix (Josef) - blk-throttle low iops timing fix (Konstantin) - nbd resize fixes (Mike) - nbd 0 blocksize crash fix (Xiubo) - block integrity error leak fix (Wenwen) - blk-cgroup writeback and priority inheritance fixes (Tejun)" * tag 'for-linus-20190715' of git://git.kernel.dk/linux-block: (42 commits) MAINTAINERS: add entry for block io cgroup null_blk: fixup ->report_zones() for !CONFIG_BLK_DEV_ZONED block: Limit zone array allocation size sd_zbc: Fix report zones buffer allocation block: Kill gfp_t argument of blkdev_report_zones() block: Allow mapping of vmalloc-ed buffers block/bio-integrity: fix a memory leak bug nvme: fix NULL deref for fabrics options nbd: add netlink reconfigure resize support nbd: fix crash when the blksize is zero block: Disable write plugging for zoned block devices block: Fix elevator name declaration block: Remove unused definitions nvme: fix regression upon hot device removal and insertion blk-throttle: fix zero wait time for iops throttled group block: Fix potential overflow in blk_report_zones() blkcg: implement REQ_CGROUP_PUNT blkcg, writeback: Implement wbc_blkcg_css() blkcg, writeback: Add wbc->no_cgroup_owner blkcg, writeback: Rename wbc_account_io() to wbc_account_cgroup_owner() ...
2019-07-15Merge branch 'i2c/for-5.3' of ↵Linus Torvalds31-473/+1274
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "New stuff from the I2C world: - in the core, getting irqs from ACPI is now similar to OF - new driver for MediaTek MT7621/7628/7688 SoCs - bcm2835, i801, and tegra drivers got some more attention - GPIO API cleanups - cleanups in the core headers - lots of usual driver updates" * 'i2c/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (74 commits) i2c: mt7621: Fix platform_no_drv_owner.cocci warnings i2c: cpm: remove casting dma_alloc dt-bindings: i2c: sun6i-p2wi: Fix the binding example dt-bindings: i2c: mv64xxx: Fix the example compatible i2c: i801: Documentation update i2c: i801: Add support for Intel Tiger Lake i2c: i801: Fix PCI ID sorting dt-bindings: i2c-stm32: document optional dmas i2c: i2c-stm32f7: Add I2C_SMBUS_I2C_BLOCK_DATA support i2c: core: Tidy up handling of init_irq i2c: core: Move ACPI gpio IRQ handling into i2c_acpi_get_irq i2c: core: Move ACPI IRQ handling to probe time i2c: acpi: Factor out getting the IRQ from ACPI i2c: acpi: Use available IRQ helper functions i2c: core: Allow whole core to use i2c_dev_irq_from_resources eeprom: at24: modify a comment referring to platform data dt-bindings: i2c: omap: Add new compatible for J721E SoCs dt-bindings: i2c: mv64xxx: Add YAML schemas dt-bindings: i2c: sun6i-p2wi: Add YAML schemas i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver ...
2019-07-15Merge tag 'for-v5.3' of ↵Linus Torvalds21-13/+798
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Core: - add HWMON compat layer - new properties: - input power limit - input voltage limit Drivers: - qcom-pon: add gen2 support - new driver for storing reboot move in NVMEM - new driver for Wilco EC charger configuration - simplify getting the adapter of a client" * tag 'for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: reset: nvmem-reboot-mode: add CONFIG_OF dependency power_supply: wilco_ec: Add charging config driver power: supply: cros: allow to set input voltage and current limit power: supply: add input power and voltage limit properties power: supply: fix semicolon.cocci warnings power: reset: nvmem-reboot-mode: use NVMEM as reboot mode write interface dt-bindings: power: reset: add document for NVMEM based reboot-mode reset: qcom-pon: Add support for gen2 pon dt-bindings: power: reset: qcom: Add qcom,pm8998-pon compatibility line power: supply: Add HWMON compatibility layer power: supply: sbs-manager: simplify getting the adapter of a client power: supply: rt9455_charger: simplify getting the adapter of a client power: supply: rt5033_battery: simplify getting the adapter of a client power: supply: max17042_battery: simplify getting the adapter of a client power: supply: max17040_battery: simplify getting the adapter of a client power: supply: max14656_charger_detector: simplify getting the adapter of a client power: supply: bq25890_charger: simplify getting the adapter of a client power: supply: bq24257_charger: simplify getting the adapter of a client power: supply: bq24190_charger: simplify getting the adapter of a client
2019-07-15Merge tag 'pci-v5.3-changes' of ↵Linus Torvalds43-553/+1351
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration changes: - Evaluate PCI Boot Configuration _DSM to learn if firmware wants us to preserve its resource assignments (Benjamin Herrenschmidt) - Simplify resource distribution (Nicholas Johnson) - Decode 32 GT/s link speed (Gustavo Pimentel) Virtualization: - Fix incorrect caching of VF config space size (Alex Williamson) - Fix VF driver probing sysfs knobs (Alex Williamson) Peer-to-peer DMA: - Fix dma_virt_ops check (Logan Gunthorpe) Altera host bridge driver: - Allow building as module (Ley Foon Tan) Armada 8K host bridge driver: - add PHYs support (Miquel Raynal) DesignWare host bridge driver: - Export APIs to support removable loadable module (Vidya Sagar) - Enable Relaxed Ordering erratum workaround only on Tegra20 & Tegra30 (Vidya Sagar) Hyper-V host bridge driver: - Fix use-after-free in eject (Dexuan Cui) Mobiveil host bridge driver: - Clean up and fix many issues, including non-identify mapped windows, 64-bit windows, multi-MSI, class code, INTx clearing (Hou Zhiqiang) Qualcomm host bridge driver: - Use clk bulk API for 2.4.0 controllers (Bjorn Andersson) - Add QCS404 support (Bjorn Andersson) - Assert PERST for at least 100ms (Niklas Cassel) R-Car host bridge driver: - Add r8a774a1 DT support (Biju Das) Tegra host bridge driver: - Add support for Gen2, opportunistic UpdateFC and ACK (PCIe protocol details) AER, GPIO-based PERST# (Manikanta Maddireddy) - Fix many issues, including power-on failure cases, interrupt masking in suspend, UPHY settings, AFI dynamic clock gating, pending DLL transactions (Manikanta Maddireddy) Xilinx host bridge driver: - Fix NWL Multi-MSI programming (Bharat Kumar Gogada) Endpoint support: - Fix 64bit BAR support (Alan Mikhak) - Fix pcitest build issues (Alan Mikhak, Andy Shevchenko) Bug fixes: - Fix NVIDIA GPU multi-function power dependencies (Abhishek Sahu) - Fix NVIDIA GPU HDA enablement issue (Lukas Wunner) - Ignore lockdep for sysfs "remove" (Marek Vasut) Misc: - Convert docs to reST (Changbin Du, Mauro Carvalho Chehab)" * tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (107 commits) PCI: Enable NVIDIA HDA controllers tools: PCI: Fix installation when `make tools/pci_install` PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB PCI: Fix typos and whitespace errors PCI: mobiveil: Fix INTx interrupt clearing in mobiveil_pcie_isr() PCI: mobiveil: Fix infinite-loop in the INTx handling function PCI: mobiveil: Move PCIe PIO enablement out of inbound window routine PCI: mobiveil: Add upper 32-bit PCI base address setup in inbound window PCI: mobiveil: Add upper 32-bit CPU base address setup in outbound window PCI: mobiveil: Mask out hardcoded bits in inbound/outbound windows setup PCI: mobiveil: Clear the control fields before updating it PCI: mobiveil: Add configured inbound windows counter PCI: mobiveil: Fix the valid check for inbound and outbound windows PCI: mobiveil: Clean-up program_{ib/ob}_windows() PCI: mobiveil: Remove an unnecessary return value check PCI: mobiveil: Fix error return values PCI: mobiveil: Refactor the MEM/IO outbound window initialization PCI: mobiveil: Make some register updates more readable PCI: mobiveil: Reformat the code for readability dt-bindings: PCI: mobiveil: Change gpio_slave and apb_csr to optional ...
2019-07-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds185-24118/+17580
Pull rdma updates from Jason Gunthorpe: "A smaller cycle this time. Notably we see another new driver, 'Soft iWarp', and the deletion of an ancient unused driver for nes. - Revise and simplify the signature offload RDMA MR APIs - More progress on hoisting object allocation boiler plate code out of the drivers - Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib, i40iw - Tree wide cleanups: struct_size, put_user_page, xarray, rst doc conversion - Removal of obsolete ib_ucm chardev and nes driver - netlink based discovery of chardevs and autoloading of the modules providing them - Move more of the rdamvt/hfi1 uapi to include/uapi/rdma - New driver 'siw' for software based iWarp running on top of netdev, much like rxe's software RoCE. - mlx5 feature to report events in their raw devx format to userspace - Expose per-object counters through rdma tool - Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core from netdev" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (194 commits) RMDA/siw: Require a 64 bit arch RDMA/siw: Mark expected switch fall-throughs RDMA/core: Fix -Wunused-const-variable warnings rdma/siw: Remove set but not used variable 's' rdma/siw: Add missing dependencies on LIBCRC32C and DMA_VIRT_OPS RDMA/siw: Add missing rtnl_lock around access to ifa rdma/siw: Use proper enumerated type in map_cqe_status RDMA/siw: Remove unnecessary kthread create/destroy printouts IB/rdmavt: Fix variable shadowing issue in rvt_create_cq RDMA/core: Fix race when resolving IP address RDMA/core: Make rdma_counter.h compile stand alone IB/core: Work on the caller socket net namespace in nldev_newlink() RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM RDMA/mlx5: Set RDMA DIM to be enabled by default RDMA/nldev: Added configuration of RDMA dynamic interrupt moderation to netlink RDMA/core: Provide RDMA DIM support for ULPs linux/dim: Implement RDMA adaptive moderation (DIM) IB/mlx5: Report correctly tag matching rendezvous capability docs: infiniband: add it to the driver-api bookset IB/mlx5: Implement VHCA tunnel mechanism in DEVX ...
2019-07-15Merge tag 'mfd-next-5.3' of ↵Linus Torvalds40-434/+6493
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Frameworks: - Set 'struct device' fwnode when registering a new device New Drivers: - Add support for ROHM BD70528 PMIC New Device Support: - Add support for LP87561 4-Phase Regulator to TI LP87565 PMIC - Add support for RK809 and RK817 to Rockchip RK808 - Add support for Lid Angle to ChromeOS core - Add support for CS47L15 CODEC to Madera core - Add support for CS47L92 CODEC to Madera core - Add support for ChromeOS (legacy) Accelerometers in ChromeOS core - Add support for Add Intel Elkhart Lake PCH to Intel LPSS New Functionality: - Provide regulator supply information when registering; madera-core - Additional Device Tree support; lp87565, madera, cros-ec, rohm,bd71837-pmic - Allow over-riding power button press via Device Tree; rohm-bd718x7 - Differentiate between running processors; cros_ec_dev Fix-ups: - Big header file update; cros_ec_commands.h - Split header per-subsystem; rohm-bd718x7 - Remove superfluous code; menelaus, cs5535-mfd, cs47lXX-tables - Trivial; sorting, coding style; intel-lpss-pci - Only remove Power Off functionality if set locally; rk808 - Make use for Power Off Prepare(); rk808 - Fix spelling mistake in header guards; stmfx - Properly free IDA resources - SPDX fixups; cs47lXX-tables, madera - Error path fixups; hi655x-pmic Bug Fixes: - Add missing break in case() statement - Repair undefined behaviour when not initialising variables; arizona-core, madera-core - Fix reference to Device Tree documentation; madera" * tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits) mfd: hi655x-pmic: Fix missing return value check for devm_regmap_init_mmio_clk mfd: madera: Fixup SPDX headers mfd: madera: Remove some unused registers and fix some defaults mfd: intel-lpss: Release IDA resources mfd: intel-lpss: Add Intel Elkhart Lake PCH PCI IDs mfd: cs5535-mfd: Remove ifdef OLPC noise mfd: stmfx: Fix macro definition spelling dt-bindings: mfd: Add link to ROHM BD71847 Datasheet MAINAINERS: Swap words in INTEL PMIC MULTIFUNCTION DEVICE DRIVERS mfd: cros_ec_dev: Register cros_ec_accel_legacy driver as a subdevice mfd: rk808: Prepare rk805 for poweroff mfd: rk808: Check pm_power_off pointer mfd: cros_ec: differentiate SCP from EC by feature bit dt-bindings: Add binding for cros-ec-rpmsg mfd: madera: Add Madera core support for CS47L92 mfd: madera: Add Madera core support for CS47L15 mfd: madera: Update DT bindings to add additional CODECs mfd: madera: Add supply mapping for MICVDD mfd: madera: Fix potential uninitialised use of variable mfd: madera: Fix bad reference to pinctrl.txt file ...
2019-07-15Merge tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1483-33877/+473194
Pull drm updates from Dave Airlie: "The biggest thing in this is the AMD Navi GPU support, this again contains a bunch of header files that are large. These are the new AMD RX5700 GPUs that just recently became available. New drivers: - ST-Ericsson MCDE driver - Ingenic JZ47xx SoC UAPI change: - HDR source metadata property Core: - HDR inforframes and EDID parsing - drm hdmi infoframe unpacking - remove prime sg_table caching into dma-buf - New gem vram helpers to reduce driver code - Lots of drmP.h removal - reservation fencing fix - documentation updates - drm_fb_helper_connector removed - mode name command handler rewrite fbcon: - Remove the fbcon notifiers ttm: - forward progress fixes dma-buf: - make mmap call optional - debugfs refcount fixes - dma-fence free with pending signals fix - each dma-buf gets an inode Panels: - Lots of additional panel bindings amdgpu: - initial navi10 support - avoid hw reset - HDR metadata support - new thermal sensors for vega asics - RAS fixes - use HMM rather than MMU notifier - xgmi topology via kfd - SR-IOV fixes - driver reload fixes - DC use a core bpc attribute - Aux fixes for DC - Bandwidth calc updates for DC - Clock handling refactor - kfd VEGAM support vmwgfx: - Coherent memory support changes i915: - HDR Support - HDMI i2c link - Icelake multi-segmented gamma support - GuC firmware update - Mule Creek Canyon PCH support for EHL - EHL platform updtes - move i915.alpha_support to i915.force_probe - runtime PM refactoring - VBT parsing refactoring - DSI fixes - struct mutex dependency reduction - GEM code reorg mali-dp: - Komeda driver features msm: - dsi vs EPROBE_DEFER fixes - msm8998 snapdragon 835 support - a540 gpu support - mdp5 and dpu interconnect support exynos: - drmP.h removal tegra: - misc fixes tda998x: - audio support improvements - pixel repeated mode support - quantisation range handling corrections - HDMI vendor info fix armada: - interlace support fix - overlay/video plane register handling refactor - add gamma support rockchip: - RX3328 support panfrost: - expose perf counters via hidden ioctls vkms: - enumerate CRC sources list ast: - rework BO handling mgag200: - rework BO handling dw-hdmi: - suspend/resume support rcar-du: - R8A774A1 Soc Support - LVDS dual-link mode support - Additional formats - Misc fixes omapdrm: - DSI command mode display support stm - fb modifier support - runtime PM support sun4i: - use vmap ops vc4: - binner bo binding rework v3d: - compute shader support - resync/sync fixes - job management refactoring lima: - NULL pointer in irq handler fix - scheduler default timeout virtio: - fence seqno support - trace events bochs: - misc fixes tc458767: - IRQ/HDP handling sii902x: - HDMI audio support atmel-hlcdc: - misc fixes meson: - zpos support" * tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drm: (1815 commits) Revert "Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next" Revert "mm: adjust apply_to_pfn_range interface for dropped token." mm: adjust apply_to_pfn_range interface for dropped token. drm/amdgpu/navi10: add uclk activity sensor drm/amdgpu: properly guard the generic discovery code drm/amdgpu: add missing documentation on new module parameters drm/amdgpu: don't invalidate caches in RELEASE_MEM, only do the writeback drm/amd/display: avoid 64-bit division drm/amdgpu/psp11: simplify the ucode register logic drm/amdgpu: properly guard DC support in navi code drm/amd/powerplay: vega20: fix uninitialized variable use drm/amd/display: dcn20: include linux/delay.h amdgpu: make pmu support optional drm/amd/powerplay: Zero initialize current_rpm in vega20_get_fan_speed_percent drm/amd/powerplay: Zero initialize freq in smu_v11_0_get_current_clk_freq drm/amd/powerplay: Use memset to initialize metrics structs drm/amdgpu/mes10.1: Fix header guard drm/amd/powerplay: add temperature sensor support for navi10 drm/amdgpu: fix scheduler timeout calc drm/amdgpu: Prepare for hmm_range_register API change (v2) ...
2019-07-15net/mlx5e: Allow dissector meta key in tc flowerVlad Buslov1-1/+2
Recently, fl_flow_key->indev_ifindex int field was refactored into flow_dissector_key_meta field. With this, flower classifier also sets FLOW_DISSECTOR_KEY_META flow dissector key. However, mlx5 flower dissector validation code rejects filters that use flow dissector keys that are not supported. Add FLOW_DISSECTOR_KEY_META to the list of allowed dissector keys in __parse_cls_flower() to prevent following error when offloading flower classifier to mlx5: Error: mlx5_core: Unsupported key. Fixes: 8212ed777f40 ("net: sched: cls_flower: use flow_dissector for ingress ifindex") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-15net/mlx5e: Rely on filter_dev instead of dissector keys for tunnelsVlad Buslov1-5/+1
Currently, tunnel attributes are parsed and inner header matching is used only when flow dissector specifies match on some of the supported encapsulation fields. When user tries to offload tc filter that doesn't match any encapsulation fields on tunnel device, mlx5 tc layer incorrectly sets to match packet header keys on encap header (outer header) and firmware rejects the rule with syndrome 0x7e1579 when creating new flow group. Change __parse_cls_flower() to determine whether tunnel is used based on fitler_dev tunnel info, instead of determining it indirectly by checking flow dissector enc keys. Fixes: bbd00f7e2349 ("net/mlx5e: Add TC tunnel release action for SRIOV offloads") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-15net/mlx5e: Verify encapsulation is supportedEli Cohen1-0/+4
When mlx5e_attach_encap() calls mlx5e_get_tc_tun() to get the tunnel info data struct, check that returned value is not NULL, as would be in the case of unsupported encapsulation. Fixes: d386939a327d2 ("net/mlx5e: Rearrange tc tunnel code in a modular way") Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-15ISDN: hfcsusb: checking idx of ep configurationPhong Tran1-0/+3
The syzbot test with random endpoint address which made the idx is overflow in the table of endpoint configuations. this adds the checking for fixing the error report from syzbot KASAN: stack-out-of-bounds Read in hfcsusb_probe [1] The patch tested by syzbot [2] Reported-by: syzbot+8750abbc3a46ef47d509@syzkaller.appspotmail.com [1]: https://syzkaller.appspot.com/bug?id=30a04378dac680c5d521304a00a86156bb913522 [2]: https://groups.google.com/d/msg/syzkaller-bugs/_6HBdge8F3E/OJn7wVNpBAAJ Signed-off-by: Phong Tran <tranmanphong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-16Revert "Merge branch 'vmwgfx-next' of ↵Dave Airlie21-1685/+445
git://people.freedesktop.org/~thomash/linux into drm-next" This reverts commit 031e610a6a21448a63dff7a0416e5e206724caac, reversing changes made to 52d2d44eee8091e740d0d275df1311fb8373c9a9. The mm changes in there we premature and not fully ack or reviewed by core mm folks, I dropped the ball by merging them via this tree, so lets take em all back out. Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-07-15vmxnet3: Remove call to memset after dma_alloc_coherentFuqian Huang1-1/+0
In commit 518a2f1925c3 ("dma-mapping: zero memory returned from dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So memset is not needed. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-15hippi: Remove call to memset after pci_alloc_consistentFuqian Huang1-2/+0
pci_alloc_consistent calls dma_alloc_coherent directly. In commit 518a2f1925c3 ("dma-mapping: zero memory returned from dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So memset is not needed. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-15ethernet: remove redundant memsetFuqian Huang14-27/+0
kvzalloc already zeroes the memory during the allocation. pci_alloc_consistent calls dma_alloc_coherent directly. In commit 518a2f1925c3 ("dma-mapping: zero memory returned from dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So the memset after these function is not needed. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-15atm: idt77252: Remove call to memset after dma_alloc_coherentFuqian Huang1-1/+0
In commit 518a2f1925c3 ("dma-mapping: zero memory returned from dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So memset is not needed. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-15rt2x00usb: fix rx queue hangSoeren Moch1-6/+6
Since commit ed194d136769 ("usb: core: remove local_irq_save() around ->complete() handler") the handler rt2x00usb_interrupt_rxdone() is not running with interrupts disabled anymore. So this completion handler is not guaranteed to run completely before workqueue processing starts for the same queue entry. Be sure to set all other flags in the entry correctly before marking this entry ready for workqueue processing. This way we cannot miss error conditions that need to be signalled from the completion handler to the worker thread. Note that rt2x00usb_work_rxdone() processes all available entries, not only such for which queue_work() was called. This patch is similar to what commit df71c9cfceea ("rt2x00: fix order of entry flags modification") did for TX processing. This fixes a regression on a RT5370 based wifi stick in AP mode, which suddenly stopped data transmission after some period of heavy load. Also stopping the hanging hostapd resulted in the error message "ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 14 failed to flush". Other operation modes are probably affected as well, this just was the used testcase. Fixes: ed194d136769 ("usb: core: remove local_irq_save() around ->complete() handler") Cc: stable@vger.kernel.org # 4.20+ Signed-off-by: Soeren Moch <smoch@web.de> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Powered by cgit, Gruvboxed by Blaster4385.