aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2013-09-24Merge tag 'v3.12-rc2' into drm-intel-nextDaniel Vetter4020-137762/+366917
Backmerge Linux 3.12-rc2 to prep for a bunch of -next patches: - Header cleanup in intel_drv.h, both changed in -fixes and my current -next pile. - Cursor handling cleanup for -next which depends upon the cursor handling fix merged into -rc2. All just trivial conflicts of the "changed adjacent lines" type: drivers/gpu/drm/i915/i915_gem.c drivers/gpu/drm/i915/intel_display.c drivers/gpu/drm/i915/intel_drv.h Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-23Merge tag 'staging-3.12-rc2' of ↵Linus Torvalds35-97/+160
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging fixes from Greg KH: "Here are a number of small staging tree and iio driver fixes. Nothing major, just lots of little things" * tag 'staging-3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (34 commits) iio:buffer_cb: Add missing iio_buffer_init() iio: Prevent race between IIO chardev opening and IIO device free iio: fix: Keep a reference to the IIO device for open file descriptors iio: Stop sampling when the device is removed iio: Fix crash when scan_bytes is computed with active_scan_mask == NULL iio: Fix mcp4725 dev-to-indio_dev conversion in suspend/resume iio: Fix bma180 dev-to-indio_dev conversion in suspend/resume iio: Fix tmp006 dev-to-indio_dev conversion in suspend/resume iio: iio_device_add_event_sysfs() bugfix staging: iio: ade7854-spi: Fix return value staging:iio:hmc5843: Fix measurement conversion iio: isl29018: Fix uninitialized value staging:iio:dummy fix kfifo_buf kconfig dependency issue if kfifo modular and buffer enabled for built in dummy driver. iio: at91: fix adc_clk overflow staging: line6: add bounds check in snd_toneport_source_put() Staging: comedi: Fix dependencies for drivers misclassified as PCI staging: r8188eu: Adjust RX gain staging: r8188eu: Fix smatch warning in core/rtw_ieee80211. staging: r8188eu: Fix smatch error in core/rtw_mlme_ext.c staging: r8188eu: Fix Smatch off-by-one warning in hal/rtl8188e_hal_init.c ...
2013-09-23Merge tag 'usb-3.12-rc2' of ↵Linus Torvalds31-72/+81
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of small USB fixes for 3.12-rc2. One is a revert of a EHCI change that isn't quite ready for 3.12. Others are minor things, gadget fixes, Kconfig fixes, and some quirks and documentation updates. All have been in linux-next for a bit" * tag 'usb-3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: pl2303: distinguish between original and cloned HX chips USB: Faraday fotg210: fix email addresses USB: fix typo in usb serial simple driver Kconfig Revert "USB: EHCI: support running URB giveback in tasklet context" usb: s3c-hsotg: do not disconnect gadget when receiving ErlySusp intr usb: s3c-hsotg: fix unregistration function usb: gadget: f_mass_storage: reset endpoint driver data when disabled usb: host: fsl-mph-dr-of: Staticize local symbols usb: gadget: f_eem: Staticize eem_alloc usb: gadget: f_ecm: Staticize ecm_alloc usb: phy: omap-usb3: Fix return value usb: dwc3: gadget: avoid memory leak when failing to allocate all eps usb: dwc3: remove extcon dependency usb: gadget: add '__ref' for rndis_config_register() and cdc_config_register() usb: dwc3: pci: add support for BayTrail usb: gadget: cdc2: fix conversion to new interface of f_ecm usb: gadget: fix a bug and a WARN_ON in dummy-hcd usb: gadget: mv_u3d_core: fix violation of locking discipline in mv_u3d_ep_disable()
2013-09-22Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds22-193/+273
Pull drm fixes from Dave Airlie: - some small fixes for msm and exynos - a regression revert affecting nouveau users with old userspace - intel pageflip deadlock and gpu hang fixes, hsw modesetting hangs * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (22 commits) Revert "drm: mark context support as a legacy subsystem" drm/i915: Don't enable the cursor on a disable pipe drm/i915: do not update cursor in crtc mode set drm/exynos: fix return value check in lowlevel_buffer_allocate() drm/exynos: Fix address space warnings in exynos_drm_fbdev.c drm/exynos: Fix address space warning in exynos_drm_buf.c drm/exynos: Remove redundant OF dependency drm/msm: drop unnecessary set_need_resched() drm/i915: kill set_need_resched drm/msm: fix potential NULL pointer dereference drm/i915/dvo: set crtc timings again for panel fixed modes drm/i915/sdvo: Robustify the dtd<->drm_mode conversions drm/msm: workaround for missing irq drm/msm: return -EBUSY if bo still active drm/msm: fix return value check in ERR_PTR() drm/msm: fix cmdstream size check drm/msm: hangcheck harder drm/msm: handle read vs write fences drm/i915/sdvo: Fully translate sync flags in the dtd->mode conversion drm/i915: Use proper print format for debug prints ...
2013-09-21iio:buffer_cb: Add missing iio_buffer_init()Lars-Peter Clausen1-0/+2
Make sure to properly initialize the IIO buffer data structure. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-21iio: Prevent race between IIO chardev opening and IIO device freeLars-Peter Clausen1-9/+12
Set the IIO device as the parent for the character device We need to make sure that the IIO device is not freed while the character device exists, otherwise the freeing of the IIO device might race against the file open callback. Do this by setting the character device's parent to the IIO device, this will cause the character device to grab a reference to the IIO device and only release it once the character device itself has been removed. Also move the registration of the character device before the registration of the IIO device to avoid the (rather theoretical case) that the IIO device is already freed again before we can add the character device and grab a reference to the IIO device. We also need to move the call to cdev_del() from iio_dev_release() to iio_device_unregister() (where it should have been in the first place anyway) to avoid a reference cycle. As iio_dev_release() is only called once all reference are dropped, but the character device holds a reference to the IIO device. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-21iio: fix: Keep a reference to the IIO device for open file descriptorsLars-Peter Clausen2-5/+17
Make sure that the IIO device is not freed while we still have file descriptors for it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-21iio: Stop sampling when the device is removedLars-Peter Clausen3-1/+28
Make sure to stop sampling when the device is removed, otherwise it will continue to sample forever. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-21iio: Fix crash when scan_bytes is computed with active_scan_mask == NULLPeter Meerwald1-2/+9
if device has available_scan_masks set and the buffer is enabled without any scan_elements enabled, in a NULL pointer is dereferenced in iio_compute_scan_bytes() [ 18.993713] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 19.002593] pgd = debd4000 [ 19.005432] [00000000] *pgd=9ebc0831, *pte=00000000, *ppte=00000000 [ 19.012329] Internal error: Oops: 17 [#1] PREEMPT ARM [ 19.017639] Modules linked in: [ 19.020843] CPU: 0 Not tainted (3.9.11-00036-g75c888a-dirty #207) [ 19.027587] PC is at _find_first_bit_le+0xc/0x2c [ 19.032440] LR is at iio_compute_scan_bytes+0x2c/0xf4 [ 19.037719] pc : [<c021dc60>] lr : [<c03198d0>] psr: 200d0013 [ 19.037719] sp : debd9ed0 ip : 00000000 fp : 000802bc [ 19.049713] r10: 00000000 r9 : 00000000 r8 : deb67250 [ 19.055206] r7 : 00000000 r6 : 00000000 r5 : 00000000 r4 : deb67000 [ 19.062011] r3 : de96ec00 r2 : 00000000 r1 : 00000004 r0 : 00000000 [ 19.068847] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 19.076324] Control: 10c5387d Table: 9ebd4019 DAC: 00000015 problem is the rollback code in iio_update_buffers(), old_mask may be NULL (e.g. on first call) I'm not too confident about the fix; works for me... Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-21iio: Fix mcp4725 dev-to-indio_dev conversion in suspend/resumePeter Meerwald1-6/+6
dev_to_iio_dev() is a false friend Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-21iio: Fix bma180 dev-to-indio_dev conversion in suspend/resumePeter Meerwald1-2/+2
dev_to_iio_dev() is a false friend Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-21iio: Fix tmp006 dev-to-indio_dev conversion in suspend/resumePeter Meerwald1-2/+4
dev_to_iio_dev() is a false friend Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-20Merge tag 'pm+acpi-3.12-rc2' of ↵Linus Torvalds4-16/+35
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: 1) Four fixes for cpufreq regressions introduced by the changes that removed Device Tree parsing for CPU device nodes from cpufreq drivers from Sudeep KarkadaNagesha. 2) Two fixes for recent cpufreq regressions introduced by changes related to the preservation of sysfs attributes over system suspend/resume cycles from Viresh Kumar. 3) Fix for ACPI-based wakeup signaling in the PCI subsystem that fails to stop PME polling for devices put into the D3cold power state from Rafael J Wysocki. 4) Fix for bad interactions between cpufreq and udev on systems supporting intel_pstate where acpi-cpufreq is available as well from Yinghai Lu. * tag 'pm+acpi-3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: return EEXIST instead of EBUSY for second registering PCI / ACPI / PM: Clear pme_poll for devices in D3cold on wakeup ARM: shmobile: change dev_id to cpu0 while registering cpu clock ARM: i.MX: change dev_id to cpu0 while registering cpu clock cpufreq: imx6q-cpufreq: assign cpu_dev correctly to cpu0 device cpufreq: cpufreq-cpu0: assign cpu_dev correctly to cpu0 device cpufreq: unlock correct rwsem while updating policy->cpu cpufreq: Clear policy->cpus bits in __cpufreq_remove_dev_finish()
2013-09-20Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds2-16/+31
Pull vhost updates from Michael Tsirkin: "vhost: minor changes on top of 3.12-rc1 This fixes module loading for vhost-scsi, and tweaks locking in vhost core a bit. Both of these are not exactly release blockers but it's early in the cycle so I think it's a good idea to apply them now" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost-scsi: whitespace tweak vhost/scsi: use vmalloc for order-10 allocation vhost: wake up worker outside spin_lock
2013-09-20drm/i915: assume all GM45 Acer laptops use inverted backlight PWMJani Nikula1-14/+5
There is plenty of evidence suggesting all of the GM45 based Acer laptops (including their eMachines and Packard Bell brands) use inverted backlight PWM. Assume this is really the case, and quirk them all. The old bugs that were fixed by subsystem device specific quirks: * https://bugs.freedesktop.org/show_bug.cgi?id=59628 * https://bugzilla.kernel.org/show_bug.cgi?id=31522#c35 * https://bugs.freedesktop.org/show_bug.cgi?id=44156 * https://bugzilla.kernel.org/show_bug.cgi?id=53881 See also this bug and the plethora of duplicates: * https://bugs.launchpad.net/ubuntu/+source/linux/+bug/765438 References: https://bugzilla.kernel.org/show_bug.cgi?id=54171 Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-20drm/i915: cleanup a min_t() castDan Carpenter1-1/+1
The lower layers of sysfs will not allow an "offset" of more than GEN7_L3LOG_SIZE and also l3_access_valid() caps it a second time. But it's a little easier to audit if we don't have to worry that the subtraction will result in negative values. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-20drm/i915: Pull intel_init_power_well() out of intel_modeset_init_hw()Ville Syrjälä3-2/+4
The init and resume codepaths want to handel the power well in slightly different ways, so pull the power well init out from intel_modeset_init_hw() which gets called in both cases. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-20drm/i915: Add POWER_DOMAIN_VGAVille Syrjälä2-0/+4
VGA registers/memory live inside the the display power well. Add a power domain for VGA. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-20drm/i915: Refactor power well refcount inc/dec operationsVille Syrjälä1-18/+21
We increase/decrease the power well refcount in several places now, and all of those places need to do the same thing, so pull that code into a few small helper functions. v2: Rename the funcs to __intel_power_well_{get,put} Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-20drm/i915: Add intel_display_power_{get, put} to request power for specific ↵Ville Syrjälä2-0/+67
domains Add APIs to get/put power well references for specific purposes. v2: Split the i915_request change to another patch Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-20drm/i915: Change i915_request power well handlingVille Syrjälä2-9/+35
Reorganize the internal i915_request power well handling to use the reference count just like everyone else. This way all we need to do is check the reference count and we know whether the power well needs to be enabled of disabled. v2: Split he intel_display_power_{get,put} change to another patch. Add intel_resume_power_well() to make sure we enable the power well on resume Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-20Merge branch 'pm-cpufreq'Rafael J. Wysocki3-13/+32
* pm-cpufreq: cpufreq: return EEXIST instead of EBUSY for second registering ARM: shmobile: change dev_id to cpu0 while registering cpu clock ARM: i.MX: change dev_id to cpu0 while registering cpu clock cpufreq: imx6q-cpufreq: assign cpu_dev correctly to cpu0 device cpufreq: cpufreq-cpu0: assign cpu_dev correctly to cpu0 device cpufreq: unlock correct rwsem while updating policy->cpu cpufreq: Clear policy->cpus bits in __cpufreq_remove_dev_finish()
2013-09-20drm/i915: POSTING_READ IPS_CTL before waiting for the vblankPaulo Zanoni1-0/+1
Make sure we write to IPS before we actually wait. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-20drm/i915: don't disable ERR_INT on the IRQ handlerPaulo Zanoni1-19/+0
We currently disable the ERR_INT interrupts while running the IRQ handler because we fear that if we do an unclaimed register access from inside the IRQ handler we'll keep triggering the IRQ handler forever. The problem is that since we always disable the ERR_INT interrupts at the IRQ handler, when we get a FIFO underrun we'll always print both messages: - "uncleared fifo underrun on pipe A" - "Pipe A FIFO underrun" Because the "was_enabled" variable from ivybridge_set_fifo_underrun_reporting will always be false (since we disable ERR int at the IRQ handler!). Instead of actually fixing ivybridge_set_fifo_underrun_reporting, let's just remove the "disable ERR_INT during the IRQ handler" code. As far as we know we shouldn't really be triggering ERR_INT interrupts from the IRQ handler, so if we ever get stuck in the endless loop of interrupts we can git-bisect and revert (and we can even bisect and revert this patch in case I'm just wrong). As a bonus, our IRQ handler is now simpler and a few nanoseconds faster. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-20drm/i915/vlv: disable rc6p and rc6pp residency reporting on BYTJesse Barnes1-0/+4
Byt doesn't have rc6p and rc6pp support and even more important the the offsets of the residency registers there's something else. So Just return a constant 0 to avoid upsetting userspace tools like powertop. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Explain a bit in the commit message what's going on.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-20drm/i915/vlv: honor i915_enable_rc6 boot param on VLVJesse Barnes1-3/+4
Disabling it isn't really an option on these platforms, but having it available for power comparisons is useful. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-19Merge tag 'fixes-for-linus' of ↵Linus Torvalds2-8/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A set of fixes for ARM platforms for 3.12. Among them: - A fix for build breakage in the MTD subsystem for some PXA devices. David Woodhouse has this patch in his for-next branch but has not been responding to our requests to send it up so here it is. I should have amended the commit message to describe the build failure for CONFIG_OF=n setups, but forgot and now it's down in the stack of commits. - Added device-tree for the BeagleBone Black. Turns out people have been using the older "regualar" bone DT for the newer boards, and there's risk of damaging hardware that way. - Misc DT and regular fixes for OMAP. - Fix to make the ST-Ericsson "snowball" boards boot with multi_v7_defconfig, and enable one of the ST-E reference boards on the same config. - Kconfig cleanup for u300 to hide submenus when the platform isn't enabled. - Enable ARM_ATAG_DTB_COMPAT to let firmware override command line when booting with an appended devicetree on non-DT-enabled firmware (needed to boot snowball)" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits) ARM: multi_v7: add HREFv60 to multi_v7 defconfig ARM: OMAP2+: mux: fix trivial typo in name ARM: OMAP4 SMP: Corrected a typo fucntions to functions ARM: OMAP4: cpuidle: fix: call cpu_cluster_pm_exit conditionally mailbox: remove unnecessary platform_set_drvdata() ARM: mach-omap2: gpmc: Fix warning when CONFIG_ARM_LPAE=y ARM: OMAP: fix return value check in omap_device_build_from_dt() ARM: OMAP4: Fix clock_get error for GPMC during boot ARM: sa1100: collie.c: fall back to jedec_probe flash detection ARM: u300: hide submenus ARM: dts: igep00x0: Add pinmux configuration for MCBSP2 ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for blaze ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard mtd: nand: pxa3xx: Remove unneeded ifdef CONFIG_OF ARM: multi_v7_defconfig: enable ARM_ATAG_DTB_COMPAT ARM: ux500: disable outer cache debug ARM: dts: OMAP5: fix ocp2scp DTS data ARM: dts: OMAP5: fix reg property size ARM: dts: am335x-bone*: add DT for BeagleBone Black ARM: dts: omap3-beagle-xm: fix string error in compatible property ...
2013-09-20Merge branch 'msm-fixes-3.12' of ↵Dave Airlie7-45/+107
git://people.freedesktop.org/~robclark/linux into drm-fixes A couple small msm fixes. Plus drop of set_need_resched(). * 'msm-fixes-3.12' of git://people.freedesktop.org/~robclark/linux: drm/msm: drop unnecessary set_need_resched() drm/msm: fix potential NULL pointer dereference drm/msm: workaround for missing irq drm/msm: return -EBUSY if bo still active drm/msm: fix return value check in ERR_PTR() drm/msm: fix cmdstream size check drm/msm: hangcheck harder drm/msm: handle read vs write fences
2013-09-20Merge branch 'exynos-drm-fixes' of ↵Dave Airlie3-6/+8
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Just small fixes, and code cleanups. * 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: fix return value check in lowlevel_buffer_allocate() drm/exynos: Fix address space warnings in exynos_drm_fbdev.c drm/exynos: Fix address space warning in exynos_drm_buf.c drm/exynos: Remove redundant OF dependency
2013-09-20Merge tag 'drm-intel-fixes-2013-09-19' of ↵Dave Airlie9-74/+122
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Some more dealock fixes around pageflips and gpu hangs, fixes for hsw hangs when doing modesets/dpms. And a few minor things to rectify issues with our modeset state tracking which the checker spotted. * tag 'drm-intel-fixes-2013-09-19' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Don't enable the cursor on a disable pipe drm/i915: do not update cursor in crtc mode set drm/i915: kill set_need_resched drm/i915/dvo: set crtc timings again for panel fixed modes drm/i915/sdvo: Robustify the dtd<->drm_mode conversions drm/i915/sdvo: Fully translate sync flags in the dtd->mode conversion drm/i915: Use proper print format for debug prints drm/i915: fix wait_for_pending_flips vs gpu hang deadlock drm/i915: Track pfit enable state separately from size
2013-09-20cpufreq: return EEXIST instead of EBUSY for second registeringYinghai Lu1-1/+1
On systems that support intel_pstate, acpi_cpufreq fails to load, and udev keeps trying until trace gets filled up and kernel crashes. The root cause is driver return ret from cpufreq_register_driver(), because when some other driver takes over before, it will return EBUSY and then udev will keep trying ... cpufreq_register_driver() should return EEXIST instead so that the system can boot without appending intel_pstate=disable and still use intel_pstate. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-20Revert "drm: mark context support as a legacy subsystem"Dave Airlie3-68/+36
This reverts commit 7c510133d93dd6f15ca040733ba7b2891ed61fd1. Well looks like not enough digging was done, libdrm_nouveau before 2.4.33 used contexts, 292da616fe1f936ca78a3fa8e1b1b19883e343b6 nouveau: pull in major libdrm rewrite got rid of them, Reported-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com> Reported-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-09-20PCI / ACPI / PM: Clear pme_poll for devices in D3cold on wakeupRafael J. Wysocki1-3/+3
Commit 448bd85 (PCI/PM: add PCIe runtime D3cold support) added a piece of code to pci_acpi_wake_dev() causing that function to behave in a special way for devices in D3cold (so that their configuration registers are not accessed before those devices are resumed). However, it didn't take the clearing of the pme_poll flag into account. That has to be done for all devices, even if they are in D3cold, or pci_pme_list_scan() will not know that wakeup has been signaled for the device and will poll its PME Status bit unnecessarily. Fix the problem by moving the clearing of the pme_poll flag in pci_acpi_wake_dev() before the code introduced by commit 448bd85. Reported-and-tested-by: David E. Box <david.e.box@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: 3.6+ <stable@vger.kernel.org> # 3.6+
2013-09-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds95-409/+626
Pull networking fixes from David Miller: 1) If the local_df boolean is set on an SKB we have to allocate a unique ID even if IP_DF is set in the ipv4 headers, from Ansis Atteka. 2) Some fixups for the new chipset support that went into the sfc driver, from Ben Hutchings. 3) Because SCTP bypasses a good chunk of, and actually duplicates, the logic of the ipv6 output path, some IPSEC things don't get done properly. Integrate SCTP better into the ipv6 output path so that these problems are fixed and such issues don't get missed in the future either. From Daniel Borkmann. 4) Fix skge regressions added by the DMA mapping error return checking added in v3.10, from Mikulas Patocka. 5) Kill some more IRQF_DISABLED references, from Michael Opdenacker. 6) Fix races and deadlocks in the bridging code, from Hong Zhiguo. 7) Fix error handling in tun_set_iff(), in particular don't leak resources. From Jason Wang. 8) Prevent format-string injection into xen-netback driver, from Kees Cook. 9) Fix regression added to netpoll ARP packet handling, in particular check for the right ETH_P_ARP protocol code. From Sonic Zhang. 10) Try to deal with AMD IOMMU errors when using r8169 chips, from Francois Romieu. 11) Cure freezes due to recent changes in the rt2x00 wireless driver, from Stanislaw Gruszka. 12) Don't do SPI transfers (which can sleep) in interrupt context in cw1200 driver, from Solomon Peachy. 13) Fix LEDs handling bug in 5720 tg3 chips already handled for 5719. From Nithin Sujir. 14) Make xen_netbk_count_skb_slots() count the actual number of slots that will be used, taking into consideration packing and other issues that the transmit path will run into. From David Vrabel. 15) Use the correct maximum age when calculating the bridge message_age_timer, from Chris Healy. 16) Get rid of memory leaks in mcs7780 IRDA driver, from Alexey Khoroshilov. 17) Netfilter conntrack extensions were converted to RCU but are not always freed properly using kfree_rcu(). Fix from Michal Kubecek. 18) VF reset recovery not being done correctly in qlcnic driver, from Manish Chopra. 19) Fix inverted test in ATM nicstar driver, from Andy Shevchenko. 20) Missing workqueue destroy in cxgb4 error handling, from Wei Yang. 21) Internal switch not initialized properly in bgmac driver, from Rafał Miłecki. 22) Netlink messages report wrong local and remote addresses in IPv6 tunneling, from Ding Zhi. 23) ICMP redirects should not generate socket errors in DCCP and SCTP. We're still working out how this should be handled for RAW and UDP sockets. From Daniel Borkmann and Duan Jiong. 24) We've had several bugs wherein the network namespace's loopback device gets accessed after it is free'd, NULL it out so that we can catch these problems more readily. From Eric W Biederman. 25) Fix regression in TCP RTO calculations, from Neal Cardwell. 26) Fix too early free of xen-netback network device when VIFs still exist. From Paul Durrant. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits) netconsole: fix a deadlock with rtnl and netconsole's mutex netpoll: fix NULL pointer dereference in netpoll_cleanup skge: fix broken driver ip: generate unique IP identificator if local fragmentation is allowed ip: use ip_hdr() in __ip_make_skb() to retrieve IP header xen-netback: Don't destroy the netdev until the vif is shut down net:dccp: do not report ICMP redirects to user space cnic: Fix crash in cnic_bnx2x_service_kcq() bnx2x, cnic, bnx2i, bnx2fc: Fix bnx2i and bnx2fc regressions. vxlan: Avoid creating fdb entry with NULL destination tcp: fix RTO calculated from cached RTT drivers: net: phy: cicada.c: clears warning Use #include <linux/io.h> instead of <asm/io.h> net loopback: Set loopback_dev to NULL when freed batman-adv: set the TAG flag for the vid passed to BLA netfilter: nfnetlink_queue: use network skb for sequence adjustment net: sctp: rfc4443: do not report ICMP redirects to user space net: usb: cdc_ether: use usb.h macros whenever possible net: usb: cdc_ether: fix checkpatch errors and warnings net: usb: cdc_ether: Use wwan interface for Telit modules ip6_tunnels: raddr and laddr are inverted in nl msg ...
2013-09-19drm/i915: s/HAS_L3_GPU_CACHE/HAS_L3_DPFBen Widawsky5-10/+11
We'd only ever used this define to denote whether or not we have the dynamic parity feature (DPF) and never to determine whether or not L3 exists. Baytrail is a good example of where L3 exists, and not DPF. This patch provides clarify in the code for future use cases which might want to actually query whether or not L3 exists. v2: Add /* DPF == dynamic parity feature */ Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-19drm/i915: Do remaps for all contextsBen Widawsky4-27/+41
On both Ivybridge and Haswell, row remapping information is saved and restored with context. This means, we never actually properly supported the l3 remapping because our sysfs interface is asynchronous (and not tied to any context), and the known faulty HW would be reused by the next context to run. Not that due to the asynchronous nature of the sysfs entry, there is no point modifying the registers for the existing context. Instead we set a flag for all contexts to load the correct remapping information on the next run. Interested clients can use debugfs to determine whether or not the row has been remapped. One could propose at this point that we just do the remapping in the kernel. I guess since we have to maintain the sysfs interface anyway, I'm not sure how useful it is, and I do like keeping the policy in userspace; (it wasn't my original decision to make the interface the way it is, so I'm not attached). v2: Force a context switch when we have a remap on the next switch. (Ville) Don't let userspace use the interface with disabled contexts. v3: Don't force a context switch, just let it nop Improper context slice remap initialization, 1<<1 instead of 1<<i, but I rewrote it to avoid a second round of confusion. Error print moved to error path (All Ville) Added a comment on why the slice remap initialization happens. CC: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-19drm/i915: Keep a list of all contextsBen Widawsky4-6/+16
I have implemented this patch before without creating a separate list (I'm having trouble finding the links, but the messages ids are: <1364942743-6041-2-git-send-email-ben@bwidawsk.net> <1365118914-15753-9-git-send-email-ben@bwidawsk.net>) However, the code is much simpler to just use a list and it makes the code from the next patch a lot more pretty. As you'll see in the next patch, the reason for this is to be able to specify when a context needs to get L3 remapping. More details there. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-19drm/i915: Make l3 remapping use the ringBen Widawsky3-22/+23
Using LRI for setting the remapping registers allows us to stream l3 remapping information. This is necessary to handle per context remaps as we'll see implemented in an upcoming patch. Using the ring also means we don't need to frob the DOP clock gating bits. v2: Add comment about lack of worry for concurrent register access (Daniel) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [danvet: Bikeshed the comment a bit by doing a s/XXX/Note - there's nothing to fix.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-19drm/i915: Add second slice l3 remappingBen Widawsky6-57/+113
Certain HSW SKUs have a second bank of L3. This L3 remapping has a separate register set, and interrupt from the first "slice". A slice is simply a term to define some subset of the GPU's l3 cache. This patch implements both the interrupt handler, and ability to communicate with userspace about this second slice. v2: Remove redundant check about non-existent slice. Change warning about interrupts of unknown slices to WARN_ON_ONCE Handle the case where we get 2 slice interrupts concurrently, and switch the tracking of interrupts to be non-destructive (all Ville) Don't enable/mask the second slice parity interrupt for ivb/vlv (even though all docs I can find claim it's rsvd) (Ville + Bryan) Keep BYT excluded from L3 parity v3: Fix the slice = ffs to be decremented by one (found by Ville). When I initially did my testing on the series, I was using 1-based slice counting, so this code was correct. Not sure why my simpler tests that I've been running since then didn't pick it up sooner. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-19drm/i915: Fix HSW parity testBen Widawsky1-1/+13
Haswell changed the log registers to be WO, so we can no longer read them to determine the programming (which sucks, see later note). For now, simply use the cached value, and hope HW doesn't screw us over. v2: Simplify the logic to avoid an extra !, remove last, and fix the buffer offset which broke along the rebase (Ville) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57441 CC: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-19netconsole: fix a deadlock with rtnl and netconsole's mutexNikolay Aleksandrov1-4/+1
This bug was introduced by commit 7a163bfb7ce50895bbe67300ea610d31b9c09230 ("netconsole: avoid a crash with multiple sysfs writers"). In store_enabled() we have the following sequence: acquire nt->mutex then rtnl, but in the netconsole netdev notifier we have rtnl then nt->mutex effectively leading to a deadlock. The NULL pointer dereference that the above commit tries to fix is actually due to another bug in netpoll_cleanup(). This is fixed by dropping the mutex from the netdev notifier as it's already protected by rtnl. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-19skge: fix broken driverMikulas Patocka1-2/+3
The patch 136d8f377e1575463b47840bc5f1b22d94bf8f63 broke the skge driver. Note this part of the patch: + if (skge_rx_setup(skge, e, nskb, skge->rx_buf_size) < 0) { + dev_kfree_skb(nskb); + goto resubmit; + } + pci_unmap_single(skge->hw->pdev, dma_unmap_addr(e, mapaddr), dma_unmap_len(e, maplen), PCI_DMA_FROMDEVICE); skb = e->skb; prefetch(skb->data); - skge_rx_setup(skge, e, nskb, skge->rx_buf_size); The function skge_rx_setup modifies e->skb to point to the new skb. Thus, after this change, the new buffer, not the old, is returned to the networking stack. This bug is present in kernels 3.11, 3.11.1 and 3.12-rc1. The patch should be queued for 3.11-stable. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Vasiliy Glazov <vascom2@gmail.com> Tested-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-19ip: generate unique IP identificator if local fragmentation is allowedAnsis Atteka1-1/+1
If local fragmentation is allowed, then ip_select_ident() and ip_select_ident_more() need to generate unique IDs to ensure correct defragmentation on the peer. For example, if IPsec (tunnel mode) has to encrypt large skbs that have local_df bit set, then all IP fragments that belonged to different ESP datagrams would have used the same identificator. If one of these IP fragments would get lost or reordered, then peer could possibly stitch together wrong IP fragments that did not belong to the same datagram. This would lead to a packet loss or data corruption. Signed-off-by: Ansis Atteka <aatteka@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-19xen-netback: Don't destroy the netdev until the vif is shut downPaul Durrant3-21/+23
Without this patch, if a frontend cycles through states Closing and Closed (which Windows frontends need to do) then the netdev will be destroyed and requires re-invocation of hotplug scripts to restore state before the frontend can move to Connected. Thus when udev is not in use the backend gets stuck in InitWait. With this patch, the netdev is left alone whilst the backend is still online and is only de-registered and freed just prior to destroying the vif (which is also nicely symmetrical with the netdev allocation and registration being done during probe) so no re-invocation of hotplug scripts is required. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-19Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds3-13/+3
Pull MIPS updates from Ralf Baechle: - Minor updates and fixes to the Octeon ethernet driver in staging - A fix to VGA_MAP_MEM() for 64 bit platforms - Fix a workaround for 74K/1074K processors - The symlink arch/mips/boot/dts/include/dt-bindings was pointing to a a file with a name ending in \n. I think this may have been caused by a git bug with with patches sent by email - A build fix for VGA console on BCM1480-based systems - Fix PCI device access via "/sys/bus/pci/.../resource0" or similar work for Alchemy platforms - Fix potential data leak on MIPS R5 cores. This doesn't add proper support for any R5 features, just ensures a kernel without such support will be secure to run - Adding a macros for the CP0 Config5 register to be used by the R5 fix - Make get_cycles() actually return something useful where possible This also requires a preparatory patch for performance sake - Fix a warning about the use of smp_processor_id() in preemptible code. Again this includes a preparatory patch adding the infrastructure to be used by the actual patch - Finally remove pointless one-line comment * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Fix invalid symbolic link file MIPS: PCI: pci-bcm1480: Include missing vt.h header MIPS: Disable usermode switching of the FR bit for MIPS R5 CPUs. MIPS: Add MIPS R5 config5 register. MIPS: PCI: Use pci_resource_to_user to map pci memory space properly MIPS: 74K/1074K: Correct erratum workaround. MIPS: Cleanup CP0 PRId and CP1 FPIR register access masks MIPS: Remove useless comment about kprobe from arch/mips/Makefile MIPS: Fix VGA_MAP_MEM macro. MIPS: Reimplement get_cycles(). MIPS: Optimize current_cpu_type() for better code. MIPS: Fix accessing to per-cpu data when flushing the cache MIPS: Provide nice way to access boot CPU's data. staging: octeon-ethernet: rgmii: enable interrupts that we can handle staging: octeon-ethernet: remove skb alloc failure warnings staging: octeon-ethernet: make dropped packets to consume NAPI budget
2013-09-19Merge branch 'for-linus' of ↵Linus Torvalds1-18/+59
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull ceph fixes from Sage Weil: "These fix several bugs with RBD from 3.11 that didn't get tested in time for the merge window: some error handling, a use-after-free, and a sequencing issue when unmapping and image races with a notify operation. There is also a patch fixing a problem with the new ceph + fscache code that just went in" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: fscache: check consistency does not decrement refcount rbd: fix error handling from rbd_snap_name() rbd: ignore unmapped snapshots that no longer exist rbd: fix use-after free of rbd_dev->disk rbd: make rbd_obj_notify_ack() synchronous rbd: complete notifies before cleaning up osd_client and rbd_dev libceph: add function to ensure notifies are complete
2013-09-19drm/i915: dump crtc timings from the pipe configDaniel Vetter1-0/+12
I always get royally confused how a modeline with all zeros could possible pass the paranoid pipe config checker. Until I realize again that we only check the crtc timings. So dump the crtc timings for the adjusted mode. This will be even more important for 3D support where the crtc timings are markedly different from the input modeline if we have frame-by-frame 3d output enabled. Cc: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-19drm/i915: register backlight device also when backlight class is a moduleJani Nikula1-1/+1
Ville and I were wondering why his laptop was missing the intel_backlight sysfs interface. Turns out we never register it when CONFIG_BACKLIGHT_CLASS_DEVICE=m. This has been broken ever since the i915 native backlight interface was added. CC: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-19drm/i915: write D_COMP using the mailboxPaulo Zanoni2-2/+12
You can't write it using the MCHBAR mirror, the write will just get dropped. This should make us BSpec-compliant, but there's no real bug I could reproduce that is fixed by this patch. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Fix spelling mistake in the comment that Damien spotted.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-18Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds54-259/+832
Pull drm radeon/nouveau/core fixes from Dave Airlie: "Mostly radeon fixes, with some nouveau bios parser, ttm fix and a fix for AST driver" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (42 commits) drm/fb-helper: don't sleep for screen unblank when an oops is in progress drm, ttm Fix uninitialized warning drm/ttm: fix the tt_populated check in ttm_tt_destroy() drm/nouveau/ttm: prevent double-free in nouveau_sgdma_create_ttm() failure path drm/nouveau/bios/init: fix thinko in INIT_CONFIGURE_MEM drm/nouveau/kms: enable for non-vga pci classes drm/nouveau/bios/init: stub opcode 0xaa drm/radeon: avoid UVD corruptions on AGP cards drm/radeon: fix panel scaling with eDP and LVDS bridges drm/radeon/dpm: rework auto performance level enable drm/radeon: Fix hmdi typo drm/radeon/dpm/rs780: fix force_performance state for same sclks drm/radeon/dpm/rs780: don't enable sclk scaling if not required drm/radeon/dpm/rs780: add some sanity checking to sclk scaling drm/radeon/dpm/rs780: use drm_mode_vrefresh() drm/udl: rip out set_need_resched drm/ast: fix the ast open key function drm/radeon/dpm: add bapm callback for kb/kv drm/radeon/dpm: add bapm callback for trinity drm/radeon/dpm: add infrastructure to properly handle bapm ...
Powered by cgit, Gruvboxed by Blaster4385.