| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit 9958d30f38b9 ("media: Kconfig: cleanup VIDEO_DEV dependencies")
removes the config VIDEO_V4L2 as it is merged with config VIDEO_DEV.
Long after this change, commit 38fc5136ac16 ("media: i2c: Add ov08x40 image
sensor driver") introduces and refers to the removed config VIDEO_V4L2,
basically making this driver impossible to build, test and use due to
dependencies that cannot be met.
Refer to config VIDEO_DEV instead to make this driver usable.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Fixes: 38fc5136ac16 ("media: i2c: Add ov08x40 image sensor driver")
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In commit ed5c2f5fd10d ("i2c: Make remove callback return void") drivers
were updated to remove the return value of the remove callback, and
return void.
The OV08x40 was added after this commit but was not compile tested at
the time due to a KConfig issue, and this warning was missed.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 38fc5136ac16 ("media: i2c: Add ov08x40 image sensor driver")
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Fix some 'vgxy61_write_reg' return vars not being signed int.
Fix 'expo_long_max' not being initialized.
Handle 'pm_runtime_get_sync' call that can return 1.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add v4l driver for Renesas RZ/G2L Camera data Receiving Unit.
Based on a patch in the BSP by Hien Huynh
<hien.huynh.px@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add MIPI CSI-2 receiver driver for Renesas RZ/G2L. The MIPI
CSI-2 is part of the CRU module found on RZ/G2L family.
Based on a patch in the BSP by Hien Huynh
<hien.huynh.px@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Align some register and constant definitions using tab in place of
mixed tab+spaces.
Cosmetic change only.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The ar0521_write_mode() function explicitly programs the exposure time
register and the test pattern register, which are now setup by the call
to __v4l2_ctrl_handler_setup() in ar0521_set_stream().
Removing those register writes from ar0521_write_mode() reduces the
function to two operations: geometry configuration and pll
configuration.
Move geomerty configuration in the ar0521_set_stream() caller and rename
ar0521_write_mode() to ar0521_pll_config().
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Setup all the registered controls at s_stream(1) time instead of
manually configure gains.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Adjust the control limits for V4L2_CID_VBLANK, V4L2_CID_HBLANK and
V4L2_CID_EXPOSURE when a new format is applied to the sensor.
Update the exposure control limits when a new blanking value is
applied and change the controls initialization to use valid values for the
default format.
The exposure control default value is changed to report the default
value of register 0x3012.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add support for V4L2_CID_LINK_FREQ which currently reports a single
hard-coded frequency which depends on the fixed pixel clock.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Refuse unsupported controls by returning -EINVAL in the s_ctrl
operation. While at it, remove a the default switch case in the first
switch as it effectively is now a no-op.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Rework the PLL computation procedure to take into account the currently
configured format bpp and the number of data lanes.
Comment the PLL configuration procedure with information provided by the
sensor chip manual and remove the hardcoded divider from the pixel clock
calculation.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Change the largest visibile resolution to 2592x1944, which corresponds
to the active pixel array area size. Take into account the horizontal
and vertical limits when programming the visible sizes to skip
dummy/inactive pixels.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add support for V4L2_CID_ANALOG_GAIN. The control programs the global
gain register which applies to all color channels.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Implement the enum_frame_size pad operation.
The sensor supports a continuous size range of resolutions.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The MT9P006 sensor driver sporadically fails to probe because the sensor
responds with a NACK condition to I2C address on the bus during an attempt
to read the sensor MT9P031_CHIP_VERSION register in mt9p031_registered().
Neither the MT9P006 nor MT9P031 datasheets are clear on reset signal timing.
Older MT9M034 [1] datasheet provides those timing figures in Appendix-A and
indicates it is necessary to wait 850000 EXTCLK cycles before starting any
I2C communication.
Add such a delay, which does make the sporadic I2C NACK go away, so it is
likely similar constraint applies to this sensor.
[1] https://www.onsemi.com/pdf/datasheet/mt9m034-d.pdf
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
mt9p031_init_cfg()
The mt9p031_init_cfg() already calls __mt9p031_get_pad_crop(), which
correctly calls v4l2_subdev_get_try_crop() on V4L2_SUBDEV_FORMAT_TRY
or returns &mt9p031->crop on V4L2_SUBDEV_FORMAT_ACTIVE. No need to
call v4l2_subdev_get_try_crop() in mt9p031_init_cfg() again in case
of both V4L2_SUBDEV_FORMAT_TRY and V4L2_SUBDEV_FORMAT_ACTIVE.
This also fixes a splat generated by this call since commit
2ba3e38517f5a ("media: v4l: subdev: Fail graciously when getting try data for NULL state")
because v4l2_subdev_get_try_crop() is called with sd_state = NULL
in mt9p031_init_cfg().
Fixes: 69681cd041648 ("media: mt9p031: Move open subdev op init code into init_cfg")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The sensor takes 3 supply rails - AVDD, DVDD, and DOVDD.
Add hooks into the regulator framework for each of these
regulators.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Previously regulators were enabled on probe and never again.
However, as regulators are disabled on power off. After a second power off
the regulator counter will underflow. Plus regulators are not required
for probing the sensor, but for streaming.
Fix this by enabling regulators on power on to balance regulator counter
properly.
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Instead of 'if (!ret)' switch to "check for the error first" rule.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add missed \n to the end of the messages.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Switch to use dev_err_probe() to simpify error path and unify message
template.
While at it, add missed \n to the end of the messages.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In some cases it might hide real bugs, in most cases here it's just
redundant as it's being reassigned immediately after initial assignment.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
fwnode API does proper checks and returns correct codes, no need
to repeat it in the caller.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Letting the compiler remove these functions when the kernel is built
without CONFIG_PM_SLEEP support is simpler and less heavier for builds
than the use of __maybe_unused attributes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The struct i2c_client pointer is used only to get driver data,
associated with a struct device or print messages on behalf.
Moreover, the very same pointer to a struct device is already
assigned by a regmap and can be retrieved from there.
No need to keep a duplicative pointer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Still there are archs/platforms which do not support the common clk
framework. If such a platform is used in combination with the module
enabled the compiler will throw an error. Since the clock has stubs if
not selected we can drop it, so it is up to the arch/platform to select
the correct clock framework.
Fixes: 80a21da36051 ("media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
<linux/lcm.h> is not needed for this driver. Remove the corresponding
#include.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The cacheflush import is never used, so it is safe to remove it as an
import.
Signed-off-by: Ian Cowan <ian@linux.cowan.aero>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The imx7-media-csi driver, currently in staging, is ready for
prime-time. The staging TODO file lists a few items specific to that
driver, that are already addressed (the "all of the above" part) or can
be addressed later:
- The frame interval monitoring support is a software mechanism to
monitor the device for unexpected stalls, and should be part of the
V4L2 core if desired.
- Restricting the support media bus formats based on the SoC integration
only aims at reducing userspace confusion by not enumerating options
that are known not to be possible, it won't cause regressions if
handled later.
Move the description of the media bus format restriction TODO item to
the driver, drop the other TODO items, and move the driver out of
staging.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The imx8mq-mipi-csi2 driver targets SoCs that also run the
imx7-media-csi driver, but they are distinct. Decouple them in Kconfig
to prepare for destaging of the imx7-media-csi driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Commit 9babbbaaeb87 ("media: imx: imx7-media-csi: Use dual sampling for
YUV 1X16") set BIT_MIPI_DOUBLE_CMPNT in the CR18 register for 16-bit YUV
formats in imx7_csi_configure(). The CR18 register is always updated
with read-modify-write cycles, so if a 16-bit YUV format is selected,
the bit will stay set forever, even if the format is changed. Fix it by
clearing the bit at the beginning of the imx7_csi_configure() function.
While at it, swap two of the bits being cleared to match the MSB to LSB
order. This doesn't cause any functional change.
Fixes: 9babbbaaeb87 ("media: imx: imx7-media-csi: Use dual sampling for YUV 1X16")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
All the phys variables and structure fields store a DMA address, not a
physical address. Even if the two are effectively identical on all
platforms where this driver is used due to the lack of IOMMU, rename the
variables to dma_addr to make their usage clearer.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The phys variable is only used as a local loop variable in
imx7_csi_setup_vb2_buf(), with each entry in the array being used in the
corresponding iteration of the loop only. Move it to loop scope,
simplifying the array to a single variable.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The CSI hardware compatible with this driver handles buffers using a
ping-pong mechanism with two sets of destination addresses. Normally,
when an interrupt comes in to signal the completion of one buffer, say
FB1, it assigns the next buffer in the queue to the next FB1, and the
hardware starts to capture into FB2 in the meantime.
In a buffer underrun situation, in the above example without loss of
generality, if a new buffer is queued before the interrupt for FB1 comes
in, we can program the buffer into FB2 (which is programmed with a dummy
buffer, as there is a buffer underrun).
This of course races with the interrupt that signals FB1 completion, as
once that interrupt comes in, we are no longer guaranteed that the
programming of FB2 was in time and must assume it was too late. This
race is resolved partly by locking the programming of FB2. If it came
after the interrupt for FB1, then the variable that is used to determine
which FB to program would have been swapped by the interrupt handler.
This alone isn't sufficient, however, because the interrupt could still
be generated (thus the hardware starts capturing into the other fb)
while the fast-tracking routine has the irq lock. Thus, after
programming the fb register to fast-track the buffer, the isr also must
be checked to confirm that an interrupt didn't come in the meantime. If
it has, we must assume that programming the register for the
fast-tracked buffer was not in time, and queue the buffer normally.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
<linux/gcd.h> is not needed for this driver. Remove the corresponding
#include.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The list contains the Bayer scale index, and rational fraction of it.
The struct u32_fract is suitable type to hold that. Convert the driver
to use latter instead of former.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The ov2680_720p_30fps register init list used for the 1296x736 resolution
sets the hsize register to 1296 and the vsize register to 736.
This is actually the right thing to do when combined with the atomISP2
because the ISP requires 16 bytes padding leaving userspace to see
1280x720.
But the resolution list entries for this was incorrectly reporting
the resolution being send to the ISP as already being 1280x720,
leaving usespace to see 1274x704 as resolution.
Worse then userspace seeing a weird resolution selecting the
1280x720 sensor resolution (which in reality is sending 1296x736)
to the ISP was causing the ISP to hang on Cherry Trail based tablets
(Bay Trail works fine for some reason).
This commit also adds a bunch of comments annotating what
the various register writes the init lists are doing.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
atomisp_ospm_dphy_up() is an empty function now and
atomisp_ospm_dphy_down() contains a couple of checks + goto done
statements which don't matter since the function always ends up at
the done label regardless and then it does 1 pci-config write.
Move the single pci-config write directly to atomisp_power_off()
and remove the atomisp_ospm_dphy_up()/_down() functions.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The only thing which atomisp_ospm_dphy_down() does is disable the CSI
pins, but if we failed to probe the ISP then these will never have
been enabled (because the ISP never started streaming).
So the atomisp_ospm_dphy_down() call in the probe error path is
unnecessary, remove it.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
atomisp_css_init() is always called after calling atomisp_power_on()
either directly or through getting a runtime-pm reference.
Likewise atomisp_css_uninit() is always called after calling
atomisp_power_off().
Move the call site of these 2 functions to inside atomisp_power_on() /
atomisp_power_off() to make this more explicit.
Note this makes atomisp_reset() also set isp_fatal_error on
atomisp_power_on() errors, where as before it only did this on
atomisp_css_init() errors. This behavior change is for the better,
since power-on failing is pretty fatal too.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
atomisp_suspend() contains a 1:1 copy of atomisp_runtime_suspend() and
the same goes for the resume() functions.
Rename the runtime functions to atomisp_power_on()/_off() and use these
as runtime-pm handlers as well as helper in other places to remove
the code duplication.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Remove the unnecessary sw_contex.power_state checks:
1. atomisp_freq_scaling() and atomisp_stop_streaming() only run when the
ISP is powered up through runtime-pm, so the checks are not necessary
2. atomisp_mrfld_pre_power_down() and atomisp_runtime_resume() are only
called through the driver-core pm handling code which already
guarantees they are not called when already powered down / up.
3. atomisp_isr() also checks isp->css_initialized which only gets set
by atomisp_css_init() which runs *after* powering up the ISP and which
gets cleared by atomisp_css_uninit() *before* powering down the ISP.
So all the checks are unnecessary, remove them as well as the
sw_contex.power_state field itself.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
atomisp_css_suspend() is a 1:1 copy of atomisp_css_uninit() and
atomisp_css_resume() is a 1:1 copy of atomisp_css_init().
Remove the 2 copies and have their one caller just call
atomisp_css_uninit() / atomisp_css_init() instead.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
atomisp_css_uninit() only runs when all streams are stopped and
atomisp_css_stop() already clears the config, so the clearing
of the config can be dropped from atomisp_css_uninit().
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
atomisp_mrfld_power_down()/_up() are unnecessary wrappers around
atomisp_mrfld_power() remove them and just call atomisp_mrfld_power()
directly.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
atomisp_reset()
atomisp_reset() calls atomisp_mrfld_power_down() after calling
atomisp_runtime_suspend(), which already calls
atomisp_mrfld_power_down() itself.
And the some goes for atomisp_runtime_resume() / atomisp_mrfld_power_up().
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
After the conversion to videobuf2 userptr support is no longer needed,
drop it.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
After the conversion to videobuf2 a bunch of ia_css_frame_*()
functions are unused, remove them.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Remove atomisp_css_yuvpp_configure_viewfinder(), it is not used anywhere.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|