aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-08-24ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounterJacob Keller1-13/+46
The ixgbe_ptp_start_cyclecounter is intended to be called whenever the cyclecounter parameters need to be changed. Since commit a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x devices"), this function has cleared the SYSTIME registers and reset the TSAUXC DISABLE_SYSTIME bit. While these need to be cleared during ixgbe_ptp_reset, it is wrong to clear them during ixgbe_ptp_start_cyclecounter. This function may be called during both reset and link status change. When link changes, the SYSTIME counter is still operating normally, but the cyclecounter should be updated to account for the possibly changed parameters. Clearing SYSTIME when link changes causes the timecounter to jump because the cycle counter now reads zero. Extract the SYSTIME initialization out to a new function and call this during ixgbe_ptp_reset. This prevents the timecounter adjustment and avoids an unnecessary reset of the current time. This also restores the original SYSTIME clearing that occurred during ixgbe_ptp_reset before the commit above. Reported-by: Steve Payne <[email protected]> Reported-by: Ilya Evenbach <[email protected]> Fixes: a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x devices") Signed-off-by: Jacob Keller <[email protected]> Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2022-08-24md: call __md_stop_writes in md_stopGuoqing Jiang1-0/+1
From the link [1], we can see raid1d was running even after the path raid_dtr -> md_stop -> __md_stop. Let's stop write first in destructor to align with normal md-raid to fix the KASAN issue. [1]. https://lore.kernel.org/linux-raid/CAPhsuW5gc4AakdGNdF8ubpezAuDLFOYUO_sfMZcec6hQFm8nhg@mail.gmail.com/T/#m7f12bf90481c02c6d2da68c64aeed4779b7df74a Fixes: 48df498daf62 ("md: move bitmap_destroy to the beginning of __md_stop") Reported-by: Mikulas Patocka <[email protected]> Signed-off-by: Guoqing Jiang <[email protected]> Signed-off-by: Song Liu <[email protected]>
2022-08-24Revert "md-raid: destroy the bitmap after destroying the thread"Guoqing Jiang1-1/+1
This reverts commit e151db8ecfb019b7da31d076130a794574c89f6f. Because it obviously breaks clustered raid as noticed by Neil though it fixed KASAN issue for dm-raid, let's revert it and fix KASAN issue in next commit. [1]. https://lore.kernel.org/linux-raid/[email protected]/T/#m95ac225cab7409f66c295772483d091084a6d470 Fixes: e151db8ecfb0 ("md-raid: destroy the bitmap after destroying the thread") Signed-off-by: Guoqing Jiang <[email protected]> Signed-off-by: Song Liu <[email protected]>
2022-08-24md: Flush workqueue md_rdev_misc_wq in md_alloc()David Sloan1-0/+1
A race condition still exists when removing and re-creating md devices in test cases. However, it is only seen on some setups. The race condition was tracked down to a reference still being held to the kobject by the rdev in the md_rdev_misc_wq which will be released in rdev_delayed_delete(). md_alloc() waits for previous deletions by waiting on the md_misc_wq, but the md_rdev_misc_wq may still be holding a reference to a recently removed device. To fix this, also flush the md_rdev_misc_wq in md_alloc(). Signed-off-by: David Sloan <[email protected]> [[email protected]: rewrote commit message] Signed-off-by: Logan Gunthorpe <[email protected]> Signed-off-by: Song Liu <[email protected]>
2022-08-24md/raid10: Fix the data type of an r10_sync_page_io() argumentBart Van Assche1-7/+6
Fix the following sparse warning: drivers/md/raid10.c:2647:60: sparse: sparse: incorrect type in argument 5 (different base types) @@ expected restricted blk_opf_t [usertype] opf @@ got int rw @@ This patch does not change any functionality since REQ_OP_READ = READ = 0 and since REQ_OP_WRITE = WRITE = 1. Cc: Rong A Chen <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Paul Menzel <[email protected]> Fixes: 4ce4c73f662b ("md/core: Combine two sync_page_io() arguments") Reported-by: kernel test robot <[email protected]> Signed-off-by: Bart Van Assche <[email protected]> Signed-off-by: Song Liu <[email protected]>
2022-08-24Merge branch 'dmi-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull dmi update from Jean Delvare. Tiny cleanup. * 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: firmware: dmi: Use the proper accessor for the version field
2022-08-24loop: Check for overflow while configuring loopSiddh Raman Pant1-0/+5
The userspace can configure a loop using an ioctl call, wherein a configuration of type loop_config is passed (see lo_ioctl()'s case on line 1550 of drivers/block/loop.c). This proceeds to call loop_configure() which in turn calls loop_set_status_from_info() (see line 1050 of loop.c), passing &config->info which is of type loop_info64*. This function then sets the appropriate values, like the offset. loop_device has lo_offset of type loff_t (see line 52 of loop.c), which is typdef-chained to long long, whereas loop_info64 has lo_offset of type __u64 (see line 56 of include/uapi/linux/loop.h). The function directly copies offset from info to the device as follows (See line 980 of loop.c): lo->lo_offset = info->lo_offset; This results in an overflow, which triggers a warning in iomap_iter() due to a call to iomap_iter_done() which has: WARN_ON_ONCE(iter->iomap.offset > iter->pos); Thus, check for negative value during loop_set_status_from_info(). Bug report: https://syzkaller.appspot.com/bug?id=c620fe14aac810396d3c3edc9ad73848bf69a29e Reported-and-tested-by: [email protected] Cc: [email protected] Reviewed-by: Matthew Wilcox (Oracle) <[email protected]> Signed-off-by: Siddh Raman Pant <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2022-08-24fec: Restart PPS after link state changeCsókás Bence3-4/+77
On link state change, the controller gets reset, causing PPS to drop out and the PHC to lose its time and calibration. So we restart it if needed, restoring calibration and time registers. Changes since v2: * Add `fec_ptp_save_state()`/`fec_ptp_restore_state()` * Use `ktime_get_real_ns()` * Use `BIT()` macro Changes since v1: * More ECR #define's * Stop PPS in `fec_ptp_stop()` Signed-off-by: Csókás Bence <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-08-23Merge tag 'mlx5-fixes-2022-08-22' of ↵Jakub Kicinski10-42/+64
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2022-08-22 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2022-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Unlock on error in mlx5_sriov_enable() net/mlx5e: Fix use after free in mlx5e_fs_init() net/mlx5e: kTLS, Use _safe() iterator in mlx5e_tls_priv_tx_list_cleanup() net/mlx5: unlock on error path in esw_vfs_changed_event_handler() net/mlx5e: Fix wrong tc flag used when set hw-tc-offload off net/mlx5e: TC, Add missing policer validation net/mlx5e: Fix wrong application of the LRO state net/mlx5: Avoid false positive lockdep warning by adding lock_class_key net/mlx5: Fix cmd error logging for manage pages cmd net/mlx5: Disable irq when locking lag_lock net/mlx5: Eswitch, Fix forwarding decision to uplink net/mlx5: LAG, fix logic over MLX5_LAG_FLAG_NDEVS_READY net/mlx5e: Properly disable vlan strip on non-UL reps ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-08-23Merge branch '100GbE' of ↵Jakub Kicinski4-29/+54
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== ice: xsk: reduced queue count fixes Maciej Fijalkowski says: this small series is supposed to fix the issues around AF_XDP usage with reduced queue count on interface. Due to the XDP rings setup, some configurations can result in sockets not seeing traffic flowing. More about this in description of patch 2. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: xsk: use Rx ring's XDP ring when picking NAPI context ice: xsk: prohibit usage of non-balanced queue id ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-08-23bnxt_en: fix LRO/GRO_HW features in ndo_fix_features callbackVikas Gupta1-4/+1
LRO/GRO_HW should be disabled if there is an attached XDP program. BNXT_FLAG_TPA is the current setting of the LRO/GRO_HW. Using BNXT_FLAG_TPA to disable LRO/GRO_HW will cause these features to be permanently disabled once they are disabled. Fixes: 1dc4c557bfed ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff") Signed-off-by: Vikas Gupta <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-08-23bnxt_en: fix NQ resource accounting during vf creation on 57500 chipsVikas Gupta1-1/+1
There are 2 issues: 1. We should decrement hw_resc->max_nqs instead of hw_resc->max_irqs with the number of NQs assigned to the VFs. The IRQs are fixed on each function and cannot be re-assigned. Only the NQs are being assigned to the VFs. 2. vf_msix is the total number of NQs to be assigned to the VFs. So we should decrement vf_msix from hw_resc->max_nqs. Fixes: b16b68918674 ("bnxt_en: Add SR-IOV support for 57500 chips.") Signed-off-by: Vikas Gupta <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-08-23bnxt_en: set missing reload flag in devlink featuresVikas Gupta1-0/+1
Add missing devlink_set_features() API for callbacks reload_down and reload_up to function. Fixes: 228ea8c187d8 ("bnxt_en: implement devlink dev reload driver_reinit") Reviewed-by: Somnath Kotur <[email protected]> Signed-off-by: Vikas Gupta <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-08-23bnxt_en: Use PAGE_SIZE to init buffer when multi buffer XDP is not in usePavan Chebbi2-2/+9
Using BNXT_PAGE_MODE_BUF_SIZE + offset as buffer length value is not sufficient when running single buffer XDP programs doing redirect operations. The stack will complain on missing skb tail room. Fix it by using PAGE_SIZE when calling xdp_init_buff() for single buffer programs. Fixes: b231c3f3414c ("bnxt: refactor bnxt_rx_xdp to separate xdp_init_buff/xdp_prepare_buff") Reviewed-by: Somnath Kotur <[email protected]> Signed-off-by: Pavan Chebbi <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-08-23net: dsa: microchip: make learning configurable and keep it off while standaloneVladimir Oltean2-1/+45
Address learning should initially be turned off by the driver for port operation in standalone mode, then the DSA core handles changes to it via ds->ops->port_bridge_flags(). Leaving address learning enabled while ports are standalone breaks any kind of communication which involves port B receiving what port A has sent. Notably it breaks the ksz9477 driver used with a (non offloaded, ports act as if standalone) bonding interface in active-backup mode, when the ports are connected together through external switches, for redundancy purposes. This fixes a major design flaw in the ksz9477 and ksz8795 drivers, which unconditionally leave address learning enabled even while ports operate as standalone. Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477") Link: https://lore.kernel.org/netdev/CAFZh4h-JVWt80CrQWkFji7tZJahMfOToUJQgKS5s0_=9zzpvYQ@mail.gmail.com/ Reported-by: Brian Hutchinson <[email protected]> Signed-off-by: Vladimir Oltean <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-08-23Merge tag 'parisc-for-6.0-2' of ↵Linus Torvalds2-5/+10
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "Some interesting background to the current patchset: It turned out that the fldw instruction (which loads a 32-bit word from memory into one half of a FP register) failed on unaligned addresses and even trashed some other random FP register instead. It's a trivial one-liner fix in the exception handler but this failure dates back to the very beginnings of the parisc-port. It's strange that it was never noticed before. Another patch fixes an annoyance noticed by Randy Dunlap. Running "make ARCH=parisc64 randconfig" always returned a 32-bit config, although one would expect a 64-bit config. Masahiro Yamada suggested to mimik sparc Kconfig code, which fixed the issue nicely. This allowed to drop some compiler build checks too. Third, it's possible to build an optimized 32-bit kernel for PA8X00 (64-bit) CPUs, which then wouldn't start on 32-bit-only (PA1.x) machines. I've added a bootup check which prevents that and which prints a message to the console. This can be tested with qemu, which currently only supports 32-bit emulation. The other patches are usual clean-up stuff like added return value checks and typo fixes in comments. Summary: - Fix emulation of fldw instruction on unaligned addresses - Fix "make ARCH=parisc64 randconfig" to return a 64-bit config - Prevent boot if trying to boot a 32-bit kernel compiled for PA8X00 CPUs on 32-bit only machines - ccio-dma: Handle kmalloc failure in ccio_init_resources()" * tag 'parisc-for-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Add runtime check to prevent PA2.0 kernels on PA1.x machines parisc: ccio-dma: Handle kmalloc failure in ccio_init_resources() parisc: led: Move from strlcpy with unused retval to strscpy parisc: ccio-dma: Fix typo in comment Revert "parisc: Show error if wrong 32/64-bit compiler is being used" parisc: Make CONFIG_64BIT available for ARCH=parisc64 only parisc: Fix exception handler for fldw and fstw instructions
2022-08-23Merge tag 'mm-hotfixes-stable-2022-08-22' of ↵Linus Torvalds2-10/+33
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "Thirteen fixes, almost all for MM. Seven of these are cc:stable and the remainder fix up the changes which went into this -rc cycle" * tag 'mm-hotfixes-stable-2022-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: kprobes: don't call disarm_kprobe() for disabled kprobes mm/shmem: shmem_replace_page() remember NR_SHMEM mm/shmem: tmpfs fallocate use file_modified() mm/shmem: fix chattr fsflags support in tmpfs mm/hugetlb: support write-faults in shared mappings mm/hugetlb: fix hugetlb not supporting softdirty tracking mm/uffd: reset write protection when unregister with wp-mode mm/smaps: don't access young/dirty bit if pte unpresent mm: add DEVICE_ZONE to FOR_ALL_ZONES kernel/sys_ni: add compat entry for fadvise64_64 mm/gup: fix FOLL_FORCE COW security issue and remove FOLL_COW Revert "zram: remove double compression logic" get_maintainer: add Alan to .get_maintainer.ignore
2022-08-23Merge tag 'linux-kselftest-kunit-fixes-6.0-rc3' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit fixes from Shuah Khan: "Fix for a mmc test and to load .kunit_test_suites section when CONFIG_KUNIT=m, and not just when KUnit is built-in" * tag 'linux-kselftest-kunit-fixes-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: module: kunit: Load .kunit_test_suites section when CONFIG_KUNIT=m mmc: sdhci-of-aspeed: test: Fix dependencies when KUNIT=m
2022-08-23cpufreq: check only freq_table in __resolve_freq()Lukasz Luba1-1/+1
There is no need to check if the cpufreq driver implements callback cpufreq_driver::target_index. The logic in the __resolve_freq uses the frequency table available in the policy. It doesn't matter if the driver provides 'target_index' or 'target' callback. It just has to populate the 'policy->freq_table'. Thus, check only frequency table during the frequency resolving call. Acked-by: Viresh Kumar <[email protected]> Signed-off-by: Lukasz Luba <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2022-08-23thermal/int340x_thermal: handle data_vault when the value is ZERO_SIZE_PTRLee, Chun-Yi1-4/+5
In some case, the GDDV returns a package with a buffer which has zero length. It causes that kmemdup() returns ZERO_SIZE_PTR (0x10). Then the data_vault_read() got NULL point dereference problem when accessing the 0x10 value in data_vault. [ 71.024560] BUG: kernel NULL pointer dereference, address: 0000000000000010 This patch uses ZERO_OR_NULL_PTR() for checking ZERO_SIZE_PTR or NULL value in data_vault. Signed-off-by: "Lee, Chun-Yi" <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2022-08-23ACPI: processor: Remove freq Qos request for all CPUsRiwen Lu1-1/+1
The freq Qos request would be removed repeatedly if the cpufreq policy relates to more than one CPU. Then, it would cause the "called for unknown object" warning. Remove the freq Qos request for each CPU relates to the cpufreq policy, instead of removing repeatedly for the last CPU of it. Fixes: a1bb46c36ce3 ("ACPI: processor: Add QoS requests for all CPUs") Reported-by: Jeremy Linton <[email protected]> Tested-by: Jeremy Linton <[email protected]> Signed-off-by: Riwen Lu <[email protected]> Cc: 5.4+ <[email protected]> # 5.4+ Signed-off-by: Rafael J. Wysocki <[email protected]>
2022-08-23nouveau: explicitly wait on the fence in nouveau_bo_move_m2mfKarol Herbst1-0/+9
It is a bit unlcear to us why that's helping, but it does and unbreaks suspend/resume on a lot of GPUs without any known drawbacks. Cc: [email protected] # v5.15+ Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/156 Signed-off-by: Karol Herbst <[email protected]> Reviewed-by: Lyude Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-08-23net: ipvtap - add __init/__exit annotations to module init/exit funcsMaciej Żenczykowski1-2/+2
Looks to have been left out in an oversight. Cc: Mahesh Bandewar <[email protected]> Cc: Sainath Grandhi <[email protected]> Fixes: 235a9d89da97 ('ipvtap: IP-VLAN based tap driver') Signed-off-by: Maciej Żenczykowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-08-22scsi: sd: Revert "Rework asynchronous resume support"Bart Van Assche2-71/+18
Although commit 88f1669019bd ("scsi: sd: Rework asynchronous resume support") eliminates a delay for some ATA disks after resume, it causes resume of ATA disks to fail on other setups. See also: * "Resume process hangs for 5-6 seconds starting sometime in 5.16" (https://bugzilla.kernel.org/show_bug.cgi?id=215880). * Geert's regression report (https://lore.kernel.org/linux-scsi/[email protected]/). This is what I understand about this issue: * During resume, ata_port_pm_resume() starts the SCSI error handler. This changes the SCSI host state into SHOST_RECOVERY and causes scsi_queue_rq() to return BLK_STS_RESOURCE. * sd_resume() calls sd_start_stop_device() for ATA devices. That function in turn calls sd_submit_start() which tries to submit a START STOP UNIT command. That command can only be submitted after the SCSI error handler has changed the SCSI host state back to SHOST_RUNNING. * The SCSI error handler runs on its own thread and calls schedule_work(&(ap->scsi_rescan_task)). That causes ata_scsi_dev_rescan() to be called from the context of a kernel workqueue. That call hangs in blk_mq_get_tag(). I'm not sure why - maybe because all available tags have been allocated by sd_submit_start() calls (this is a guess). Link: https://lore.kernel.org/r/[email protected] Fixes: 88f1669019bd ("scsi: sd: Rework asynchronous resume support") Cc: Damien Le Moal <[email protected]> Cc: Hannes Reinecke <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: [email protected] Reported-by: Geert Uytterhoeven <[email protected]> Reported-by: [email protected] Reported-and-tested-by: Vlastimil Babka <[email protected]> Tested-by: John Garry <[email protected]> Tested-by: Hans de Goede <[email protected]> Signed-off-by: Bart Van Assche <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-08-22bonding: 3ad: make ad_ticks_per_sec a constJonathan Toppins2-9/+4
The value is only ever set once in bond_3ad_initialize and only ever read otherwise. There seems to be no reason to set the variable via bond_3ad_initialize when setting the global variable will do. Change ad_ticks_per_sec to a const to enforce its read-only usage. Signed-off-by: Jonathan Toppins <[email protected]> Acked-by: Jay Vosburgh <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-08-22bonding: 802.3ad: fix no transmission of LACPDUsJonathan Toppins1-22/+16
This is caused by the global variable ad_ticks_per_sec being zero as demonstrated by the reproducer script discussed below. This causes all timer values in __ad_timer_to_ticks to be zero, resulting in the periodic timer to never fire. To reproduce: Run the script in `tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh` which puts bonding into a state where it never transmits LACPDUs. line 44: ip link add fbond type bond mode 4 miimon 200 \ xmit_hash_policy 1 ad_actor_sys_prio 65535 lacp_rate fast setting bond param: ad_actor_sys_prio given: params.ad_actor_system = 0 call stack: bond_option_ad_actor_sys_prio() -> bond_3ad_update_ad_actor_settings() -> set ad.system.sys_priority = bond->params.ad_actor_sys_prio -> ad.system.sys_mac_addr = bond->dev->dev_addr; because params.ad_actor_system == 0 results: ad.system.sys_mac_addr = bond->dev->dev_addr line 48: ip link set fbond address 52:54:00:3B:7C:A6 setting bond MAC addr call stack: bond->dev->dev_addr = new_mac line 52: ip link set fbond type bond ad_actor_sys_prio 65535 setting bond param: ad_actor_sys_prio given: params.ad_actor_system = 0 call stack: bond_option_ad_actor_sys_prio() -> bond_3ad_update_ad_actor_settings() -> set ad.system.sys_priority = bond->params.ad_actor_sys_prio -> ad.system.sys_mac_addr = bond->dev->dev_addr; because params.ad_actor_system == 0 results: ad.system.sys_mac_addr = bond->dev->dev_addr line 60: ip link set veth1-bond down master fbond given: params.ad_actor_system = 0 params.mode = BOND_MODE_8023AD ad.system.sys_mac_addr == bond->dev->dev_addr call stack: bond_enslave -> bond_3ad_initialize(); because first slave -> if ad.system.sys_mac_addr != bond->dev->dev_addr return results: Nothing is run in bond_3ad_initialize() because dev_addr equals sys_mac_addr leaving the global ad_ticks_per_sec zero as it is never initialized anywhere else. The if check around the contents of bond_3ad_initialize() is no longer needed due to commit 5ee14e6d336f ("bonding: 3ad: apply ad_actor settings changes immediately") which sets ad.system.sys_mac_addr if any one of the bonding parameters whos set function calls bond_3ad_update_ad_actor_settings(). This is because if ad.system.sys_mac_addr is zero it will be set to the current bond mac address, this causes the if check to never be true. Fixes: 5ee14e6d336f ("bonding: 3ad: apply ad_actor settings changes immediately") Signed-off-by: Jonathan Toppins <[email protected]> Acked-by: Jay Vosburgh <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-08-22net: moxa: get rid of asymmetry in DMA mapping/unmappingSergei Antonov1-5/+6
Since priv->rx_mapping[i] is maped in moxart_mac_open(), we should unmap it from moxart_mac_stop(). Fixes 2 warnings. 1. During error unwinding in moxart_mac_probe(): "goto init_fail;", then moxart_mac_free_memory() calls dma_unmap_single() with priv->rx_mapping[i] pointers zeroed. WARNING: CPU: 0 PID: 1 at kernel/dma/debug.c:963 check_unmap+0x704/0x980 DMA-API: moxart-ethernet 92000000.mac: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=1600 bytes] CPU: 0 PID: 1 Comm: swapper Not tainted 5.19.0+ #60 Hardware name: Generic DT based system unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0xbc/0x1f0 __warn from warn_slowpath_fmt+0x94/0xc8 warn_slowpath_fmt from check_unmap+0x704/0x980 check_unmap from debug_dma_unmap_page+0x8c/0x9c debug_dma_unmap_page from moxart_mac_free_memory+0x3c/0xa8 moxart_mac_free_memory from moxart_mac_probe+0x190/0x218 moxart_mac_probe from platform_probe+0x48/0x88 platform_probe from really_probe+0xc0/0x2e4 2. After commands: ip link set dev eth0 down ip link set dev eth0 up WARNING: CPU: 0 PID: 55 at kernel/dma/debug.c:570 add_dma_entry+0x204/0x2ec DMA-API: moxart-ethernet 92000000.mac: cacheline tracking EEXIST, overlapping mappings aren't supported CPU: 0 PID: 55 Comm: ip Not tainted 5.19.0+ #57 Hardware name: Generic DT based system unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0xbc/0x1f0 __warn from warn_slowpath_fmt+0x94/0xc8 warn_slowpath_fmt from add_dma_entry+0x204/0x2ec add_dma_entry from dma_map_page_attrs+0x110/0x328 dma_map_page_attrs from moxart_mac_open+0x134/0x320 moxart_mac_open from __dev_open+0x11c/0x1ec __dev_open from __dev_change_flags+0x194/0x22c __dev_change_flags from dev_change_flags+0x14/0x44 dev_change_flags from devinet_ioctl+0x6d4/0x93c devinet_ioctl from inet_ioctl+0x1ac/0x25c v1 -> v2: Extraneous change removed. Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver") Signed-off-by: Sergei Antonov <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-08-22net: phy: Don't WARN for PHY_READY state in mdio_bus_phy_resume()Xiaolei Wang1-4/+4
For some MAC drivers, they set the mac_managed_pm to true in its ->ndo_open() callback. So before the mac_managed_pm is set to true, we still want to leverage the mdio_bus_phy_suspend()/resume() for the phy device suspend and resume. In this case, the phy device is in PHY_READY, and we shouldn't warn about this. It also seems that the check of mac_managed_pm in WARN_ON is redundant since we already check this in the entry of mdio_bus_phy_resume(), so drop it. Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Signed-off-by: Xiaolei Wang <[email protected]> Acked-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-08-22net: ipa: don't assume SMEM is page-alignedAlex Elder1-1/+1
In ipa_smem_init(), a Qualcomm SMEM region is allocated (if needed) and then its virtual address is fetched using qcom_smem_get(). The physical address associated with that region is also fetched. The physical address is adjusted so that it is page-aligned, and an attempt is made to update the size of the region to compensate for any non-zero adjustment. But that adjustment isn't done properly. The physical address is aligned twice, and as a result the size is never actually adjusted. Fix this by *not* aligning the "addr" local variable, and instead making the "phys" local variable be the adjusted "addr" value. Fixes: a0036bb413d5b ("net: ipa: define SMEM memory region for IPA") Signed-off-by: Alex Elder <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-08-22net: dsa: microchip: keep compatibility with device tree blobs with no phy-modeVladimir Oltean1-1/+7
DSA has multiple ways of specifying a MAC connection to an internal PHY. One requires a DT description like this: port@0 { reg = <0>; phy-handle = <&internal_phy>; phy-mode = "internal"; }; (which is IMO the recommended approach, as it is the clearest description) but it is also possible to leave the specification as just: port@0 { reg = <0>; } and if the driver implements ds->ops->phy_read and ds->ops->phy_write, the DSA framework "knows" it should create a ds->slave_mii_bus, and it should connect to a non-OF-based internal PHY on this MDIO bus, at an MDIO address equal to the port address. There is also an intermediary way of describing things: port@0 { reg = <0>; phy-handle = <&internal_phy>; }; In case 2, DSA calls phylink_connect_phy() and in case 3, it calls phylink_of_phy_connect(). In both cases, phylink_create() has been called with a phy_interface_t of PHY_INTERFACE_MODE_NA, and in both cases, PHY_INTERFACE_MODE_NA is translated into phy->interface. It is important to note that phy_device_create() initializes dev->interface = PHY_INTERFACE_MODE_GMII, and so, when we use phylink_create(PHY_INTERFACE_MODE_NA), no one will override this, and we will end up with a PHY_INTERFACE_MODE_GMII interface inherited from the PHY. All this means that in order to maintain compatibility with device tree blobs where the phy-mode property is missing, we need to allow the "gmii" phy-mode and treat it as "internal". Fixes: 2c709e0bdad4 ("net: dsa: microchip: ksz8795: add phylink support") Link: https://bugzilla.kernel.org/show_bug.cgi?id=216320 Reported-by: Craig McQueen <[email protected]> Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Alvin Šipraga <[email protected]> Tested-by: Rasmus Villemoes <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-08-22net/mlx5: Unlock on error in mlx5_sriov_enable()Dan Carpenter1-1/+1
Unlock before returning if mlx5_device_enable_sriov() fails. Fixes: 84a433a40d0e ("net/mlx5: Lock mlx5 devlink reload callbacks") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-08-22net/mlx5e: Fix use after free in mlx5e_fs_init()Dan Carpenter1-2/+3
Call mlx5e_fs_vlan_free(fs) before kvfree(fs). Fixes: af8bbf730068 ("net/mlx5e: Convert mlx5e_flow_steering member of mlx5e_priv to pointer") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-08-22net/mlx5e: kTLS, Use _safe() iterator in mlx5e_tls_priv_tx_list_cleanup()Dan Carpenter1-2/+2
Use the list_for_each_entry_safe() macro to prevent dereferencing "obj" after it has been freed. Fixes: c4dfe704f53f ("net/mlx5e: kTLS, Recycle objects of device-offloaded TLS TX connections") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-08-22net/mlx5: unlock on error path in esw_vfs_changed_event_handler()Dan Carpenter1-1/+3
Unlock before returning on this error path. Fixes: f1bc646c9a06 ("net/mlx5: Use devl_ API in mlx5_esw_offloads_devlink_port_register") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-08-22net/mlx5e: Fix wrong tc flag used when set hw-tc-offload offMaor Dickman1-1/+3
The cited commit reintroduced the ability to set hw-tc-offload in switchdev mode by reusing NIC mode calls without modifying it to support both modes, this can cause an illegal memory access when trying to turn hw-tc-offload off. Fix this by using the right TC_FLAG when checking if tc rules are installed while disabling hw-tc-offload. Fixes: d3cbd4254df8 ("net/mlx5e: Add ndo_set_feature for uplink representor") Signed-off-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-08-22net/mlx5e: TC, Add missing policer validationRoi Dayan1-0/+4
There is a missing policer validation when offloading police action with tc action api. Add it. Fixes: 7d1a5ce46e47 ("net/mlx5e: TC, Support tc action api for police") Signed-off-by: Roi Dayan <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-08-22net/mlx5e: Fix wrong application of the LRO stateAya Levin1-8/+0
Driver caches packet merge type in mlx5e_params instance which must be in perfect sync with the netdev_feature's bit. Prior to this patch, in certain conditions (*) LRO state was set in mlx5e_params, while netdev_feature's bit was off. Causing the LRO to be applied on the RQs (HW level). (*) This can happen only on profile init (mlx5e_build_nic_params()), when RQ expect non-linear SKB and PCI is fast enough in comparison to link width. Solution: remove setting of packet merge type from mlx5e_build_nic_params() as netdev features are not updated. Fixes: 619a8f2a42f1 ("net/mlx5e: Use linear SKB in Striding RQ") Signed-off-by: Aya Levin <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Reviewed-by: Maxim Mikityanskiy <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-08-22net/mlx5: Avoid false positive lockdep warning by adding lock_class_keyMoshe Shemesh1-0/+4
Add a lock_class_key per mlx5 device to avoid a false positive "possible circular locking dependency" warning by lockdep, on flows which lock more than one mlx5 device, such as adding SF. kernel log: ====================================================== WARNING: possible circular locking dependency detected 5.19.0-rc8+ #2 Not tainted ------------------------------------------------------ kworker/u20:0/8 is trying to acquire lock: ffff88812dfe0d98 (&dev->intf_state_mutex){+.+.}-{3:3}, at: mlx5_init_one+0x2e/0x490 [mlx5_core] but task is already holding lock: ffff888101aa7898 (&(&notifier->n_head)->rwsem){++++}-{3:3}, at: blocking_notifier_call_chain+0x5a/0x130 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&(&notifier->n_head)->rwsem){++++}-{3:3}: down_write+0x90/0x150 blocking_notifier_chain_register+0x53/0xa0 mlx5_sf_table_init+0x369/0x4a0 [mlx5_core] mlx5_init_one+0x261/0x490 [mlx5_core] probe_one+0x430/0x680 [mlx5_core] local_pci_probe+0xd6/0x170 work_for_cpu_fn+0x4e/0xa0 process_one_work+0x7c2/0x1340 worker_thread+0x6f6/0xec0 kthread+0x28f/0x330 ret_from_fork+0x1f/0x30 -> #0 (&dev->intf_state_mutex){+.+.}-{3:3}: __lock_acquire+0x2fc7/0x6720 lock_acquire+0x1c1/0x550 __mutex_lock+0x12c/0x14b0 mlx5_init_one+0x2e/0x490 [mlx5_core] mlx5_sf_dev_probe+0x29c/0x370 [mlx5_core] auxiliary_bus_probe+0x9d/0xe0 really_probe+0x1e0/0xaa0 __driver_probe_device+0x219/0x480 driver_probe_device+0x49/0x130 __device_attach_driver+0x1b8/0x280 bus_for_each_drv+0x123/0x1a0 __device_attach+0x1a3/0x460 bus_probe_device+0x1a2/0x260 device_add+0x9b1/0x1b40 __auxiliary_device_add+0x88/0xc0 mlx5_sf_dev_state_change_handler+0x67e/0x9d0 [mlx5_core] blocking_notifier_call_chain+0xd5/0x130 mlx5_vhca_state_work_handler+0x2b0/0x3f0 [mlx5_core] process_one_work+0x7c2/0x1340 worker_thread+0x59d/0xec0 kthread+0x28f/0x330 ret_from_fork+0x1f/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&notifier->n_head)->rwsem); lock(&dev->intf_state_mutex); lock(&(&notifier->n_head)->rwsem); lock(&dev->intf_state_mutex); *** DEADLOCK *** 4 locks held by kworker/u20:0/8: #0: ffff888150612938 ((wq_completion)mlx5_events){+.+.}-{0:0}, at: process_one_work+0x6e2/0x1340 #1: ffff888100cafdb8 ((work_completion)(&work->work)#3){+.+.}-{0:0}, at: process_one_work+0x70f/0x1340 #2: ffff888101aa7898 (&(&notifier->n_head)->rwsem){++++}-{3:3}, at: blocking_notifier_call_chain+0x5a/0x130 #3: ffff88813682d0e8 (&dev->mutex){....}-{3:3}, at:__device_attach+0x76/0x460 stack backtrace: CPU: 6 PID: 8 Comm: kworker/u20:0 Not tainted 5.19.0-rc8+ Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_events mlx5_vhca_state_work_handler [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x57/0x7d check_noncircular+0x278/0x300 ? print_circular_bug+0x460/0x460 ? lock_chain_count+0x20/0x20 ? register_lock_class+0x1880/0x1880 __lock_acquire+0x2fc7/0x6720 ? register_lock_class+0x1880/0x1880 ? register_lock_class+0x1880/0x1880 lock_acquire+0x1c1/0x550 ? mlx5_init_one+0x2e/0x490 [mlx5_core] ? lockdep_hardirqs_on_prepare+0x400/0x400 __mutex_lock+0x12c/0x14b0 ? mlx5_init_one+0x2e/0x490 [mlx5_core] ? mlx5_init_one+0x2e/0x490 [mlx5_core] ? _raw_read_unlock+0x1f/0x30 ? mutex_lock_io_nested+0x1320/0x1320 ? __ioremap_caller.constprop.0+0x306/0x490 ? mlx5_sf_dev_probe+0x269/0x370 [mlx5_core] ? iounmap+0x160/0x160 mlx5_init_one+0x2e/0x490 [mlx5_core] mlx5_sf_dev_probe+0x29c/0x370 [mlx5_core] ? mlx5_sf_dev_remove+0x130/0x130 [mlx5_core] auxiliary_bus_probe+0x9d/0xe0 really_probe+0x1e0/0xaa0 __driver_probe_device+0x219/0x480 ? auxiliary_match_id+0xe9/0x140 driver_probe_device+0x49/0x130 __device_attach_driver+0x1b8/0x280 ? driver_allows_async_probing+0x140/0x140 bus_for_each_drv+0x123/0x1a0 ? bus_for_each_dev+0x1a0/0x1a0 ? lockdep_hardirqs_on_prepare+0x286/0x400 ? trace_hardirqs_on+0x2d/0x100 __device_attach+0x1a3/0x460 ? device_driver_attach+0x1e0/0x1e0 ? kobject_uevent_env+0x22d/0xf10 bus_probe_device+0x1a2/0x260 device_add+0x9b1/0x1b40 ? dev_set_name+0xab/0xe0 ? __fw_devlink_link_to_suppliers+0x260/0x260 ? memset+0x20/0x40 ? lockdep_init_map_type+0x21a/0x7d0 __auxiliary_device_add+0x88/0xc0 ? auxiliary_device_init+0x86/0xa0 mlx5_sf_dev_state_change_handler+0x67e/0x9d0 [mlx5_core] blocking_notifier_call_chain+0xd5/0x130 mlx5_vhca_state_work_handler+0x2b0/0x3f0 [mlx5_core] ? mlx5_vhca_event_arm+0x100/0x100 [mlx5_core] ? lock_downgrade+0x6e0/0x6e0 ? lockdep_hardirqs_on_prepare+0x286/0x400 process_one_work+0x7c2/0x1340 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? pwq_dec_nr_in_flight+0x230/0x230 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x59d/0xec0 ? process_one_work+0x1340/0x1340 kthread+0x28f/0x330 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Fixes: 6a3273217469 ("net/mlx5: SF, Port function state change support") Signed-off-by: Moshe Shemesh <[email protected]> Reviewed-by: Shay Drory <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-08-22net/mlx5: Fix cmd error logging for manage pages cmdRoy Novich1-3/+6
When the driver unloads, give/reclaim_pages may fail as PF driver in teardown flow, current code will lead to the following kernel log print 'failed reclaiming pages: err 0'. Fix it to get same behavior as before the cited commits, by calling mlx5_cmd_check before handling error state. mlx5_cmd_check will verify if the returned error is an actual error needed to be handled by the driver or not and will return an appropriate value. Fixes: 8d564292a166 ("net/mlx5: Remove redundant error on reclaim pages") Fixes: 4dac2f10ada0 ("net/mlx5: Remove redundant notify fail on give pages") Signed-off-by: Roy Novich <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-08-22net/mlx5: Disable irq when locking lag_lockVlad Buslov1-22/+33
The lag_lock is taken from both process and softirq contexts which results lockdep warning[0] about potential deadlock. However, just disabling softirqs by using *_bh spinlock API is not enough since it will cause warning in some contexts where the lock is obtained with hard irqs disabled. To fix the issue save current irq state, disable them before obtaining the lock an re-enable irqs from saved state after releasing it. [0]: [Sun Aug 7 13:12:29 2022] ================================ [Sun Aug 7 13:12:29 2022] WARNING: inconsistent lock state [Sun Aug 7 13:12:29 2022] 5.19.0_for_upstream_debug_2022_08_04_16_06 #1 Not tainted [Sun Aug 7 13:12:29 2022] -------------------------------- [Sun Aug 7 13:12:29 2022] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [Sun Aug 7 13:12:29 2022] swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [Sun Aug 7 13:12:29 2022] ffffffffa06dc0d8 (lag_lock){+.?.}-{2:2}, at: mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core] [Sun Aug 7 13:12:29 2022] {SOFTIRQ-ON-W} state was registered at: [Sun Aug 7 13:12:29 2022] lock_acquire+0x1c1/0x550 [Sun Aug 7 13:12:29 2022] _raw_spin_lock+0x2c/0x40 [Sun Aug 7 13:12:29 2022] mlx5_lag_add_netdev+0x13b/0x480 [mlx5_core] [Sun Aug 7 13:12:29 2022] mlx5e_nic_enable+0x114/0x470 [mlx5_core] [Sun Aug 7 13:12:29 2022] mlx5e_attach_netdev+0x30e/0x6a0 [mlx5_core] [Sun Aug 7 13:12:29 2022] mlx5e_resume+0x105/0x160 [mlx5_core] [Sun Aug 7 13:12:29 2022] mlx5e_probe+0xac3/0x14f0 [mlx5_core] [Sun Aug 7 13:12:29 2022] auxiliary_bus_probe+0x9d/0xe0 [Sun Aug 7 13:12:29 2022] really_probe+0x1e0/0xaa0 [Sun Aug 7 13:12:29 2022] __driver_probe_device+0x219/0x480 [Sun Aug 7 13:12:29 2022] driver_probe_device+0x49/0x130 [Sun Aug 7 13:12:29 2022] __driver_attach+0x1e4/0x4d0 [Sun Aug 7 13:12:29 2022] bus_for_each_dev+0x11e/0x1a0 [Sun Aug 7 13:12:29 2022] bus_add_driver+0x3f4/0x5a0 [Sun Aug 7 13:12:29 2022] driver_register+0x20f/0x390 [Sun Aug 7 13:12:29 2022] __auxiliary_driver_register+0x14e/0x260 [Sun Aug 7 13:12:29 2022] mlx5e_init+0x38/0x90 [mlx5_core] [Sun Aug 7 13:12:29 2022] vhost_iotlb_itree_augment_rotate+0xcb/0x180 [vhost_iotlb] [Sun Aug 7 13:12:29 2022] do_one_initcall+0xc4/0x400 [Sun Aug 7 13:12:29 2022] do_init_module+0x18a/0x620 [Sun Aug 7 13:12:29 2022] load_module+0x563a/0x7040 [Sun Aug 7 13:12:29 2022] __do_sys_finit_module+0x122/0x1d0 [Sun Aug 7 13:12:29 2022] do_syscall_64+0x3d/0x90 [Sun Aug 7 13:12:29 2022] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [Sun Aug 7 13:12:29 2022] irq event stamp: 3596508 [Sun Aug 7 13:12:29 2022] hardirqs last enabled at (3596508): [<ffffffff813687c2>] __local_bh_enable_ip+0xa2/0x100 [Sun Aug 7 13:12:29 2022] hardirqs last disabled at (3596507): [<ffffffff813687da>] __local_bh_enable_ip+0xba/0x100 [Sun Aug 7 13:12:29 2022] softirqs last enabled at (3596488): [<ffffffff81368a2a>] irq_exit_rcu+0x11a/0x170 [Sun Aug 7 13:12:29 2022] softirqs last disabled at (3596495): [<ffffffff81368a2a>] irq_exit_rcu+0x11a/0x170 [Sun Aug 7 13:12:29 2022] other info that might help us debug this: [Sun Aug 7 13:12:29 2022] Possible unsafe locking scenario: [Sun Aug 7 13:12:29 2022] CPU0 [Sun Aug 7 13:12:29 2022] ---- [Sun Aug 7 13:12:29 2022] lock(lag_lock); [Sun Aug 7 13:12:29 2022] <Interrupt> [Sun Aug 7 13:12:29 2022] lock(lag_lock); [Sun Aug 7 13:12:29 2022] *** DEADLOCK *** [Sun Aug 7 13:12:29 2022] 4 locks held by swapper/0/0: [Sun Aug 7 13:12:29 2022] #0: ffffffff84643260 (rcu_read_lock){....}-{1:2}, at: mlx5e_napi_poll+0x43/0x20a0 [mlx5_core] [Sun Aug 7 13:12:29 2022] #1: ffffffff84643260 (rcu_read_lock){....}-{1:2}, at: netif_receive_skb_list_internal+0x2d7/0xd60 [Sun Aug 7 13:12:29 2022] #2: ffff888144a18b58 (&br->hash_lock){+.-.}-{2:2}, at: br_fdb_update+0x301/0x570 [Sun Aug 7 13:12:29 2022] #3: ffffffff84643260 (rcu_read_lock){....}-{1:2}, at: atomic_notifier_call_chain+0x5/0x1d0 [Sun Aug 7 13:12:29 2022] stack backtrace: [Sun Aug 7 13:12:29 2022] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0_for_upstream_debug_2022_08_04_16_06 #1 [Sun Aug 7 13:12:29 2022] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [Sun Aug 7 13:12:29 2022] Call Trace: [Sun Aug 7 13:12:29 2022] <IRQ> [Sun Aug 7 13:12:29 2022] dump_stack_lvl+0x57/0x7d [Sun Aug 7 13:12:29 2022] mark_lock.part.0.cold+0x5f/0x92 [Sun Aug 7 13:12:29 2022] ? lock_chain_count+0x20/0x20 [Sun Aug 7 13:12:29 2022] ? unwind_next_frame+0x1c4/0x1b50 [Sun Aug 7 13:12:29 2022] ? secondary_startup_64_no_verify+0xcd/0xdb [Sun Aug 7 13:12:29 2022] ? mlx5e_napi_poll+0x4e9/0x20a0 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? mlx5e_napi_poll+0x4e9/0x20a0 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? stack_access_ok+0x1d0/0x1d0 [Sun Aug 7 13:12:29 2022] ? start_kernel+0x3a7/0x3c5 [Sun Aug 7 13:12:29 2022] __lock_acquire+0x1260/0x6720 [Sun Aug 7 13:12:29 2022] ? lock_chain_count+0x20/0x20 [Sun Aug 7 13:12:29 2022] ? lock_chain_count+0x20/0x20 [Sun Aug 7 13:12:29 2022] ? register_lock_class+0x1880/0x1880 [Sun Aug 7 13:12:29 2022] ? mark_lock.part.0+0xed/0x3060 [Sun Aug 7 13:12:29 2022] ? stack_trace_save+0x91/0xc0 [Sun Aug 7 13:12:29 2022] lock_acquire+0x1c1/0x550 [Sun Aug 7 13:12:29 2022] ? mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? lockdep_hardirqs_on_prepare+0x400/0x400 [Sun Aug 7 13:12:29 2022] ? __lock_acquire+0xd6f/0x6720 [Sun Aug 7 13:12:29 2022] _raw_spin_lock+0x2c/0x40 [Sun Aug 7 13:12:29 2022] ? mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core] [Sun Aug 7 13:12:29 2022] mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core] [Sun Aug 7 13:12:29 2022] mlx5_esw_bridge_rep_vport_num_vhca_id_get+0x1a0/0x600 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? mlx5_esw_bridge_update_work+0x90/0x90 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? lock_acquire+0x1c1/0x550 [Sun Aug 7 13:12:29 2022] mlx5_esw_bridge_switchdev_event+0x185/0x8f0 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? mlx5_esw_bridge_port_obj_attr_set+0x3e0/0x3e0 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? check_chain_key+0x24a/0x580 [Sun Aug 7 13:12:29 2022] atomic_notifier_call_chain+0xd7/0x1d0 [Sun Aug 7 13:12:29 2022] br_switchdev_fdb_notify+0xea/0x100 [Sun Aug 7 13:12:29 2022] ? br_switchdev_set_port_flag+0x310/0x310 [Sun Aug 7 13:12:29 2022] fdb_notify+0x11b/0x150 [Sun Aug 7 13:12:29 2022] br_fdb_update+0x34c/0x570 [Sun Aug 7 13:12:29 2022] ? lock_chain_count+0x20/0x20 [Sun Aug 7 13:12:29 2022] ? br_fdb_add_local+0x50/0x50 [Sun Aug 7 13:12:29 2022] ? br_allowed_ingress+0x5f/0x1070 [Sun Aug 7 13:12:29 2022] ? check_chain_key+0x24a/0x580 [Sun Aug 7 13:12:29 2022] br_handle_frame_finish+0x786/0x18e0 [Sun Aug 7 13:12:29 2022] ? check_chain_key+0x24a/0x580 [Sun Aug 7 13:12:29 2022] ? br_handle_local_finish+0x20/0x20 [Sun Aug 7 13:12:29 2022] ? __lock_acquire+0xd6f/0x6720 [Sun Aug 7 13:12:29 2022] ? sctp_inet_bind_verify+0x4d/0x190 [Sun Aug 7 13:12:29 2022] ? xlog_unpack_data+0x2e0/0x310 [Sun Aug 7 13:12:29 2022] ? br_handle_local_finish+0x20/0x20 [Sun Aug 7 13:12:29 2022] br_nf_hook_thresh+0x227/0x380 [br_netfilter] [Sun Aug 7 13:12:29 2022] ? setup_pre_routing+0x460/0x460 [br_netfilter] [Sun Aug 7 13:12:29 2022] ? br_handle_local_finish+0x20/0x20 [Sun Aug 7 13:12:29 2022] ? br_nf_pre_routing_ipv6+0x48b/0x69c [br_netfilter] [Sun Aug 7 13:12:29 2022] br_nf_pre_routing_finish_ipv6+0x5c2/0xbf0 [br_netfilter] [Sun Aug 7 13:12:29 2022] ? br_handle_local_finish+0x20/0x20 [Sun Aug 7 13:12:29 2022] br_nf_pre_routing_ipv6+0x4c6/0x69c [br_netfilter] [Sun Aug 7 13:12:29 2022] ? br_validate_ipv6+0x9e0/0x9e0 [br_netfilter] [Sun Aug 7 13:12:29 2022] ? br_nf_forward_arp+0xb70/0xb70 [br_netfilter] [Sun Aug 7 13:12:29 2022] ? br_nf_pre_routing+0xacf/0x1160 [br_netfilter] [Sun Aug 7 13:12:29 2022] br_handle_frame+0x8a9/0x1270 [Sun Aug 7 13:12:29 2022] ? br_handle_frame_finish+0x18e0/0x18e0 [Sun Aug 7 13:12:29 2022] ? register_lock_class+0x1880/0x1880 [Sun Aug 7 13:12:29 2022] ? br_handle_local_finish+0x20/0x20 [Sun Aug 7 13:12:29 2022] ? bond_handle_frame+0xf9/0xac0 [bonding] [Sun Aug 7 13:12:29 2022] ? br_handle_frame_finish+0x18e0/0x18e0 [Sun Aug 7 13:12:29 2022] __netif_receive_skb_core+0x7c0/0x2c70 [Sun Aug 7 13:12:29 2022] ? check_chain_key+0x24a/0x580 [Sun Aug 7 13:12:29 2022] ? generic_xdp_tx+0x5b0/0x5b0 [Sun Aug 7 13:12:29 2022] ? __lock_acquire+0xd6f/0x6720 [Sun Aug 7 13:12:29 2022] ? register_lock_class+0x1880/0x1880 [Sun Aug 7 13:12:29 2022] ? check_chain_key+0x24a/0x580 [Sun Aug 7 13:12:29 2022] __netif_receive_skb_list_core+0x2d7/0x8a0 [Sun Aug 7 13:12:29 2022] ? lock_acquire+0x1c1/0x550 [Sun Aug 7 13:12:29 2022] ? process_backlog+0x960/0x960 [Sun Aug 7 13:12:29 2022] ? lockdep_hardirqs_on_prepare+0x129/0x400 [Sun Aug 7 13:12:29 2022] ? kvm_clock_get_cycles+0x14/0x20 [Sun Aug 7 13:12:29 2022] netif_receive_skb_list_internal+0x5f4/0xd60 [Sun Aug 7 13:12:29 2022] ? do_xdp_generic+0x150/0x150 [Sun Aug 7 13:12:29 2022] ? mlx5e_poll_rx_cq+0xf6b/0x2960 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? mlx5e_poll_ico_cq+0x3d/0x1590 [mlx5_core] [Sun Aug 7 13:12:29 2022] napi_complete_done+0x188/0x710 [Sun Aug 7 13:12:29 2022] mlx5e_napi_poll+0x4e9/0x20a0 [mlx5_core] [Sun Aug 7 13:12:29 2022] ? __queue_work+0x53c/0xeb0 [Sun Aug 7 13:12:29 2022] __napi_poll+0x9f/0x540 [Sun Aug 7 13:12:29 2022] net_rx_action+0x420/0xb70 [Sun Aug 7 13:12:29 2022] ? napi_threaded_poll+0x470/0x470 [Sun Aug 7 13:12:29 2022] ? __common_interrupt+0x79/0x1a0 [Sun Aug 7 13:12:29 2022] __do_softirq+0x271/0x92c [Sun Aug 7 13:12:29 2022] irq_exit_rcu+0x11a/0x170 [Sun Aug 7 13:12:29 2022] common_interrupt+0x7d/0xa0 [Sun Aug 7 13:12:29 2022] </IRQ> [Sun Aug 7 13:12:29 2022] <TASK> [Sun Aug 7 13:12:29 2022] asm_common_interrupt+0x22/0x40 [Sun Aug 7 13:12:29 2022] RIP: 0010:default_idle+0x42/0x60 [Sun Aug 7 13:12:29 2022] Code: c1 83 e0 07 48 c1 e9 03 83 c0 03 0f b6 14 11 38 d0 7c 04 84 d2 75 14 8b 05 6b f1 22 02 85 c0 7e 07 0f 00 2d 80 3b 4a 00 fb f4 <c3> 48 c7 c7 e0 07 7e 85 e8 21 bd 40 fe eb de 66 66 2e 0f 1f 84 00 [Sun Aug 7 13:12:29 2022] RSP: 0018:ffffffff84407e18 EFLAGS: 00000242 [Sun Aug 7 13:12:29 2022] RAX: 0000000000000001 RBX: ffffffff84ec4a68 RCX: 1ffffffff0afc0fc [Sun Aug 7 13:12:29 2022] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffff835b1fac [Sun Aug 7 13:12:29 2022] RBP: 0000000000000000 R08: 0000000000000001 R09: ffff8884d2c44ac3 [Sun Aug 7 13:12:29 2022] R10: ffffed109a588958 R11: 00000000ffffffff R12: 0000000000000000 [Sun Aug 7 13:12:29 2022] R13: ffffffff84efac20 R14: 0000000000000000 R15: dffffc0000000000 [Sun Aug 7 13:12:29 2022] ? default_idle_call+0xcc/0x460 [Sun Aug 7 13:12:29 2022] default_idle_call+0xec/0x460 [Sun Aug 7 13:12:29 2022] do_idle+0x394/0x450 [Sun Aug 7 13:12:29 2022] ? arch_cpu_idle_exit+0x40/0x40 [Sun Aug 7 13:12:29 2022] cpu_startup_entry+0x19/0x20 [Sun Aug 7 13:12:29 2022] rest_init+0x156/0x250 [Sun Aug 7 13:12:29 2022] arch_call_rest_init+0xf/0x15 [Sun Aug 7 13:12:29 2022] start_kernel+0x3a7/0x3c5 [Sun Aug 7 13:12:29 2022] secondary_startup_64_no_verify+0xcd/0xdb [Sun Aug 7 13:12:29 2022] </TASK> Fixes: ff9b7521468b ("net/mlx5: Bridge, support LAG") Signed-off-by: Vlad Buslov <[email protected]> Reviewed-by: Mark Bloch <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-08-22net/mlx5: Eswitch, Fix forwarding decision to uplinkEli Cohen1-1/+2
Make sure to modify the rule for uplink forwarding only for the case where destination vport number is MLX5_VPORT_UPLINK. Fixes: 94db33177819 ("net/mlx5: Support multiport eswitch mode") Signed-off-by: Eli Cohen <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-08-22net/mlx5: LAG, fix logic over MLX5_LAG_FLAG_NDEVS_READYEli Cohen1-1/+1
Only set MLX5_LAG_FLAG_NDEVS_READY if both netdevices are registered. Doing so guarantees that both ldev->pf[MLX5_LAG_P0].dev and ldev->pf[MLX5_LAG_P1].dev have valid pointers when MLX5_LAG_FLAG_NDEVS_READY is set. The core issue is asymmetry in setting MLX5_LAG_FLAG_NDEVS_READY and clearing it. Setting it is done wrongly when both ldev->pf[MLX5_LAG_P0].dev and ldev->pf[MLX5_LAG_P1].dev are set; clearing it is done right when either of ldev->pf[i].netdev is cleared. Consider the following scenario: 1. PF0 loads and sets ldev->pf[MLX5_LAG_P0].dev to a valid pointer 2. PF1 loads and sets both ldev->pf[MLX5_LAG_P1].dev and ldev->pf[MLX5_LAG_P1].netdev with valid pointers. This results in MLX5_LAG_FLAG_NDEVS_READY is set. 3. PF0 is unloaded before setting dev->pf[MLX5_LAG_P0].netdev. MLX5_LAG_FLAG_NDEVS_READY remains set. Further execution of mlx5_do_bond() will result in null pointer dereference when calling mlx5_lag_is_multipath() This patch fixes the following call trace actually encountered: [ 1293.475195] BUG: kernel NULL pointer dereference, address: 00000000000009a8 [ 1293.478756] #PF: supervisor read access in kernel mode [ 1293.481320] #PF: error_code(0x0000) - not-present page [ 1293.483686] PGD 0 P4D 0 [ 1293.484434] Oops: 0000 [#1] SMP PTI [ 1293.485377] CPU: 1 PID: 23690 Comm: kworker/u16:2 Not tainted 5.18.0-rc5_for_upstream_min_debug_2022_05_05_10_13 #1 [ 1293.488039] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 1293.490836] Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core] [ 1293.492448] RIP: 0010:mlx5_lag_is_multipath+0x5/0x50 [mlx5_core] [ 1293.494044] Code: e8 70 40 ff e0 48 8b 14 24 48 83 05 5c 1a 1b 00 01 e9 19 ff ff ff 48 83 05 47 1a 1b 00 01 eb d7 0f 1f 44 00 00 0f 1f 44 00 00 <48> 8b 87 a8 09 00 00 48 85 c0 74 26 48 83 05 a7 1b 1b 00 01 41 b8 [ 1293.498673] RSP: 0018:ffff88811b2fbe40 EFLAGS: 00010202 [ 1293.500152] RAX: ffff88818a94e1c0 RBX: ffff888165eca6c0 RCX: 0000000000000000 [ 1293.501841] RDX: 0000000000000001 RSI: ffff88818a94e1c0 RDI: 0000000000000000 [ 1293.503585] RBP: 0000000000000000 R08: ffff888119886740 R09: ffff888165eca73c [ 1293.505286] R10: 0000000000000018 R11: 0000000000000018 R12: ffff88818a94e1c0 [ 1293.506979] R13: ffff888112729800 R14: 0000000000000000 R15: ffff888112729858 [ 1293.508753] FS: 0000000000000000(0000) GS:ffff88852cc40000(0000) knlGS:0000000000000000 [ 1293.510782] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1293.512265] CR2: 00000000000009a8 CR3: 00000001032d4002 CR4: 0000000000370ea0 [ 1293.514001] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1293.515806] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 8a66e4585979 ("net/mlx5: Change ownership model for lag") Signed-off-by: Eli Cohen <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Reviewed-by: Mark Bloch <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-08-22net/mlx5e: Properly disable vlan strip on non-UL repsVlad Buslov1-0/+2
When querying mlx5 non-uplink representors capabilities with ethtool rx-vlan-offload is marked as "off [fixed]". However, it is actually always enabled because mlx5e_params->vlan_strip_disable is 0 by default when initializing struct mlx5e_params instance. Fix the issue by explicitly setting the vlan_strip_disable to 'true' for non-uplink representors. Fixes: cb67b832921c ("net/mlx5e: Introduce SRIOV VF representors") Signed-off-by: Vlad Buslov <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-08-22ice: xsk: use Rx ring's XDP ring when picking NAPI contextMaciej Fijalkowski4-29/+48
Ice driver allocates per cpu XDP queues so that redirect path can safely use smp_processor_id() as an index to the array. At the same time though, XDP rings are used to pick NAPI context to call napi_schedule() or set NAPIF_STATE_MISSED. When user reduces queue count, say to 8, and num_possible_cpus() of underlying platform is 44, then this means queue vectors with correlated NAPI contexts will carry several XDP queues. This in turn can result in a broken behavior where NAPI context of interest will never be scheduled and AF_XDP socket will not process any traffic. To fix this, let us change the way how XDP rings are assigned to Rx rings and use this information later on when setting ice_tx_ring::xsk_pool pointer. For each Rx ring, grab the associated queue vector and walk through Tx ring's linked list. Once we stumble upon XDP ring in it, assign this ring to ice_rx_ring::xdp_ring. Previous [0] approach of fixing this issue was for txonly scenario because of the described grouping of XDP rings across queue vectors. So, relying on Rx ring meant that NAPI context could be scheduled with a queue vector without XDP ring with associated XSK pool. [0]: https://lore.kernel.org/netdev/[email protected]/ Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Fixes: 22bf877e528f ("ice: introduce XDP_TX fallback path") Signed-off-by: Maciej Fijalkowski <[email protected]> Tested-by: George Kuruvinakunnel <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-08-22ice: xsk: prohibit usage of non-balanced queue idMaciej Fijalkowski1-0/+6
Fix the following scenario: 1. ethtool -L $IFACE rx 8 tx 96 2. xdpsock -q 10 -t -z Above refers to a case where user would like to attach XSK socket in txonly mode at a queue id that does not have a corresponding Rx queue. At this moment ice's XSK logic is tightly bound to act on a "queue pair", e.g. both Tx and Rx queues at a given queue id are disabled/enabled and both of them will get XSK pool assigned, which is broken for the presented queue configuration. This results in the splat included at the bottom, which is basically an OOB access to Rx ring array. To fix this, allow using the ids only in scope of "combined" queues reported by ethtool. However, logic should be rewritten to allow such configurations later on, which would end up as a complete rewrite of the control path, so let us go with this temporary fix. [420160.558008] BUG: kernel NULL pointer dereference, address: 0000000000000082 [420160.566359] #PF: supervisor read access in kernel mode [420160.572657] #PF: error_code(0x0000) - not-present page [420160.579002] PGD 0 P4D 0 [420160.582756] Oops: 0000 [#1] PREEMPT SMP NOPTI [420160.588396] CPU: 10 PID: 21232 Comm: xdpsock Tainted: G OE 5.19.0-rc7+ #10 [420160.597893] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [420160.609894] RIP: 0010:ice_xsk_pool_setup+0x44/0x7d0 [ice] [420160.616968] Code: f3 48 83 ec 40 48 8b 4f 20 48 8b 3f 65 48 8b 04 25 28 00 00 00 48 89 44 24 38 31 c0 48 8d 04 ed 00 00 00 00 48 01 c1 48 8b 11 <0f> b7 92 82 00 00 00 48 85 d2 0f 84 2d 75 00 00 48 8d 72 ff 48 85 [420160.639421] RSP: 0018:ffffc9002d2afd48 EFLAGS: 00010282 [420160.646650] RAX: 0000000000000050 RBX: ffff88811d8bdd00 RCX: ffff888112c14ff8 [420160.655893] RDX: 0000000000000000 RSI: ffff88811d8bdd00 RDI: ffff888109861000 [420160.665166] RBP: 000000000000000a R08: 000000000000000a R09: 0000000000000000 [420160.674493] R10: 000000000000889f R11: 0000000000000000 R12: 000000000000000a [420160.683833] R13: 000000000000000a R14: 0000000000000000 R15: ffff888117611828 [420160.693211] FS: 00007fa869fc1f80(0000) GS:ffff8897e0880000(0000) knlGS:0000000000000000 [420160.703645] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [420160.711783] CR2: 0000000000000082 CR3: 00000001d076c001 CR4: 00000000007706e0 [420160.721399] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [420160.731045] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [420160.740707] PKRU: 55555554 [420160.745960] Call Trace: [420160.750962] <TASK> [420160.755597] ? kmalloc_large_node+0x79/0x90 [420160.762703] ? __kmalloc_node+0x3f5/0x4b0 [420160.769341] xp_assign_dev+0xfd/0x210 [420160.775661] ? shmem_file_read_iter+0x29a/0x420 [420160.782896] xsk_bind+0x152/0x490 [420160.788943] __sys_bind+0xd0/0x100 [420160.795097] ? exit_to_user_mode_prepare+0x20/0x120 [420160.802801] __x64_sys_bind+0x16/0x20 [420160.809298] do_syscall_64+0x38/0x90 [420160.815741] entry_SYSCALL_64_after_hwframe+0x63/0xcd [420160.823731] RIP: 0033:0x7fa86a0dd2fb [420160.830264] Code: c3 66 0f 1f 44 00 00 48 8b 15 69 8b 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bc 0f 1f 44 00 00 f3 0f 1e fa b8 31 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d 8b 0c 00 f7 d8 64 89 01 48 [420160.855410] RSP: 002b:00007ffc1146f618 EFLAGS: 00000246 ORIG_RAX: 0000000000000031 [420160.866366] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fa86a0dd2fb [420160.876957] RDX: 0000000000000010 RSI: 00007ffc1146f680 RDI: 0000000000000003 [420160.887604] RBP: 000055d7113a0520 R08: 00007fa868fb8000 R09: 0000000080000000 [420160.898293] R10: 0000000000008001 R11: 0000000000000246 R12: 000055d7113a04e0 [420160.909038] R13: 000055d7113a0320 R14: 000000000000000a R15: 0000000000000000 [420160.919817] </TASK> [420160.925659] Modules linked in: ice(OE) af_packet binfmt_misc nls_iso8859_1 ipmi_ssif intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp mei_me coretemp ioatdma mei ipmi_si wmi ipmi_msghandler acpi_pad acpi_power_meter ip_tables x_tables autofs4 ixgbe i40e crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd ahci mdio dca libahci lpc_ich [last unloaded: ice] [420160.977576] CR2: 0000000000000082 [420160.985037] ---[ end trace 0000000000000000 ]--- [420161.097724] RIP: 0010:ice_xsk_pool_setup+0x44/0x7d0 [ice] [420161.107341] Code: f3 48 83 ec 40 48 8b 4f 20 48 8b 3f 65 48 8b 04 25 28 00 00 00 48 89 44 24 38 31 c0 48 8d 04 ed 00 00 00 00 48 01 c1 48 8b 11 <0f> b7 92 82 00 00 00 48 85 d2 0f 84 2d 75 00 00 48 8d 72 ff 48 85 [420161.134741] RSP: 0018:ffffc9002d2afd48 EFLAGS: 00010282 [420161.144274] RAX: 0000000000000050 RBX: ffff88811d8bdd00 RCX: ffff888112c14ff8 [420161.155690] RDX: 0000000000000000 RSI: ffff88811d8bdd00 RDI: ffff888109861000 [420161.168088] RBP: 000000000000000a R08: 000000000000000a R09: 0000000000000000 [420161.179295] R10: 000000000000889f R11: 0000000000000000 R12: 000000000000000a [420161.190420] R13: 000000000000000a R14: 0000000000000000 R15: ffff888117611828 [420161.201505] FS: 00007fa869fc1f80(0000) GS:ffff8897e0880000(0000) knlGS:0000000000000000 [420161.213628] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [420161.223413] CR2: 0000000000000082 CR3: 00000001d076c001 CR4: 00000000007706e0 [420161.234653] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [420161.245893] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [420161.257052] PKRU: 55555554 Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Signed-off-by: Maciej Fijalkowski <[email protected]> Tested-by: George Kuruvinakunnel <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-08-22nfc: pn533: Fix use-after-free bugs caused by pn532_cmd_timeoutDuoming Zhou1-0/+1
When the pn532 uart device is detaching, the pn532_uart_remove() is called. But there are no functions in pn532_uart_remove() that could delete the cmd_timeout timer, which will cause use-after-free bugs. The process is shown below: (thread 1) | (thread 2) | pn532_uart_send_frame pn532_uart_remove | mod_timer(&pn532->cmd_timeout,...) ... | (wait a time) kfree(pn532) //FREE | pn532_cmd_timeout | pn532_uart_send_frame | pn532->... //USE This patch adds del_timer_sync() in pn532_uart_remove() in order to prevent the use-after-free bugs. What's more, the pn53x_unregister_nfc() is well synchronized, it sets nfc_dev->shutting_down to true and there are no syscalls could restart the cmd_timeout timer. Fixes: c656aa4c27b1 ("nfc: pn533: add UART phy driver") Signed-off-by: Duoming Zhou <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-08-22r8152: fix the RX FIFO settings when suspendingHayes Wang1-0/+10
The RX FIFO would be changed when suspending, so the related settings have to be modified, too. Otherwise, the flow control would work abnormally. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216333 Reported-by: Mark Blakeney <[email protected]> Fixes: cdf0b86b250f ("r8152: fix a WOL issue") Signed-off-by: Hayes Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-08-22r8152: fix the units of some registers for RTL8156AHayes Wang1-15/+2
The units of PLA_RX_FIFO_FULL and PLA_RX_FIFO_EMPTY are 16 bytes. Fixes: 195aae321c82 ("r8152: support new chips") Signed-off-by: Hayes Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-08-22parisc: ccio-dma: Handle kmalloc failure in ccio_init_resources()Li Qiong1-3/+8
As the possible failure of the kmalloc(), it should be better to fix this error path, check and return '-ENOMEM' error code. Signed-off-by: Li Qiong <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2022-08-22parisc: led: Move from strlcpy with unused retval to strscpyWolfram Sang1-1/+1
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <[email protected]> Signed-off-by: Helge Deller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.