| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
XDP requires using isolated transmit queues to avoid interference
with normal networking stack (BQL, NETDEV_TX_BUSY, etc). This patch
adds a XDP queue per cpu when a XDP program is loaded and does not
expose the queues to the OS via the normal API call to
netif_set_real_num_tx_queues(). This way the stack will never push
an skb to these queues.
However virtio/vhost/qemu implementation only allows for creating
TX/RX queue pairs at this time so creating only TX queues was not
possible. And because the associated RX queues are being created I
went ahead and exposed these to the stack and let the backend use
them. This creates more RX queues visible to the network stack than
TX queues which is worth mentioning but does not cause any issues as
far as I can tell.
Signed-off-by: John Fastabend <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This adds XDP support to virtio_net. Some requirements must be
met for XDP to be enabled depending on the mode. First it will
only be supported with LRO disabled so that data is not pushed
across multiple buffers. Second the MTU must be less than a page
size to avoid having to handle XDP across multiple pages.
If mergeable receive is enabled this patch only supports the case
where header and data are in the same buf which we can check when
a packet is received by looking at num_buf. If the num_buf is
greater than 1 and a XDP program is loaded the packet is dropped
and a warning is thrown. When any_header_sg is set this does not
happen and both header and data is put in a single buffer as expected
so we check this when XDP programs are loaded. Subsequent patches
will process the packet in a degraded mode to ensure connectivity
and correctness is not lost even if backend pushes packets into
multiple buffers.
If big packets mode is enabled and MTU/LRO conditions above are
met then XDP is allowed.
This patch was tested with qemu with vhost=on and vhost=off where
mergeable and big_packet modes were forced via hard coding feature
negotiation. Multiple buffers per packet was forced via a small
test patch to vhost.c in the vhost=on qemu mode.
Suggested-by: Shrijeet Mukherjee <[email protected]>
Signed-off-by: John Fastabend <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Signed-off-by: Madalin Bucur <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Ensure correct access to the big endian QMan HW through proper
accessors.
Signed-off-by: Claudiu Manoil <[email protected]>
Signed-off-by: Madalin Bucur <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Locally originated traffic in a VRF fails in the presence of a POSTROUTING
rule. For example,
$ iptables -t nat -A POSTROUTING -s 11.1.1.0/24 -j MASQUERADE
$ ping -I red -c1 11.1.1.3
ping: Warning: source address might be selected on device other than red.
PING 11.1.1.3 (11.1.1.3) from 11.1.1.2 red: 56(84) bytes of data.
ping: sendmsg: Operation not permitted
Worse, the above causes random corruption resulting in a panic in random
places (I have not seen a consistent backtrace).
Call nf_reset to drop the conntrack info following the pass through the
VRF device. The nf_reset is needed on Tx but not Rx because of the order
in which NF_HOOK's are hit: on Rx the VRF device is after the real ingress
device and on Tx it is is before the real egress device. Connection
tracking should be tied to the real egress device and not the VRF device.
Fixes: 8f58336d3f78a ("net: Add ethernet header for pass through VRF device")
Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device")
Signed-off-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Connection tracking with VRF is broken because the pass through the VRF
device drops the connection tracking info. Removing the call to nf_reset
allows DNAT and MASQUERADE to work across interfaces within a VRF.
Fixes: 73e20b761acf ("net: vrf: Add support for PREROUTING rules on vrf device")
Signed-off-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
There are hardware PCI implementations of Cadence GEM network
controller. This patch will allow to use such hardware with reuse of
existing Platform Driver.
Signed-off-by: Bartosz Folta <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Include calculations to compute the number of segments
that comprise an aggregated large packet.
Signed-off-by: Thomas Falcon <[email protected]>
Reviewed-by: Marcelo Ricardo Leitner <[email protected]>
Reviewed-by: Jonathan Maxwell <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
On ACPI systems, clocks are not available to drivers directly. They are
handled exclusively by ACPI and/or firmware, so there is no clock driver.
Calls to clk_get() always fail, so we should not even attempt to claim
any clocks on ACPI systems.
Signed-off-by: Timur Tabi <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Like other Y700 models Lenovo Y700 15-ACZ does not have a physical rfkill switch.
ideapad-laptop wrongly reports all radios as blocked by hardware which causes
wireless network connections to fail.
Add this model without an rfkill switch to the no_hw_rfkill list.
Signed-off-by: Artiom Vaskov <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
|
|
The Surface 3 is not following the ACPI spec for PNP0C40, but nearly.
The device is connected to a I2C device that might have some magic
but we don't know about.
Just create the device after the enumeration and use the declared GPIOs
to provide button support.
This driver is just an adaptation of drivers/input/misc/soc_button_array.c
The Surface Pro 3 is using an ACPI driver and matches against the bid
of the device ("VGBI"). To prevent this incompatible driver to be used
on the Surface Pro, we add a match on the Surface 3 bid "TEV2".
link: https://bugzilla.kernel.org/show_bug.cgi?id=102761
Signed-off-by: Benjamin Tissoires <[email protected]>
Acked-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
|
|
The LID state provided by ACPI on the Surface 3 is not accurate.
The ACPI node doesn't get notified on LID open, which means the
LID input switch stays close most of the time.
Fortunatelly, there is a WMI method which directly queries the
GPIO underneath the LID state, so it's far more reliable than ACPI.
To get the notifications that the LID was opened/closed, we can
rely on the ACPI notification of the touchscreen: the DSDT shows
that the touchscreen will get notified on close/open as it also
controls its _STA method.
Note that we need to set the tag "power-switch" to the LID
input node through a udev rule for logind to accept it:
SUBSYSTEM=="input", KERNEL=="event*", KERNELS=="surface3-wmi", \
TAG+="power-switch"
Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
|
|
Add calls for mlxcpld-hotplug platform driver registration/unregistration
and add platform hotplug data configurations. This driver, when registered
within system will handle system hot-plug events for the power suppliers,
power cables and fans (insertion and removing). These events are
controlled through CPLD Lattice device.
Signed-off-by: Vadim Pasternak <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
|
|
drivers/platform/x86/mlx-platform.c:219:2-3: Unneeded semicolon
Remove unneeded semicolon.
Generated by: scripts/coccinelle/misc/semicolon.cocci
CC: Vadim Pasternak <[email protected]>
Signed-off-by: Fengguang Wu <[email protected]>
Acked-by: Vadim Pasternak <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
|
|
Since mlx-platform is not an architectural driver, it is moved out
of arch/x86/platform to drivers/platform/x86.
Relevant Makefile and Kconfig are updated.
Signed-off-by: Vadim Pasternak <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
|
|
Convert some of the obvious hand-rolled ranged overflow sanity checks to
our shiny new range_overflows macro.
Cc: Joonas Lahtinen <[email protected]>
Cc: Chris Wilson <[email protected]>
Suggested-by: Chris Wilson <[email protected]>
Signed-off-by: Matthew Auld <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Chris Wilson <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
|
|
|
|
In a number places we hand-roll the overflow sanity check for ranges, so
roll that into single macro, conceived by Chris, along with its typed
variant.
Cc: Joonas Lahtinen <[email protected]>
Cc: Chris Wilson <[email protected]>
Suggested-by: Chris Wilson <[email protected]>
Signed-off-by: Matthew Auld <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Chris Wilson <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
|
|
If we move the sanity checking from gen8_alloc_va_range_3lvl and
gen6_alloc_va_range into i915_vma_bind, we will increase our coverage to
now both callbacks. We also convert each WARN_ON over to a GEM_WARN_ON.
Cc: Joonas Lahtinen <[email protected]>
Cc: Chris Wilson <[email protected]>
Suggested-by: Chris Wilson <[email protected]>
Signed-off-by: Matthew Auld <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Chris Wilson <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
|
|
In a similar spirit to GEM_BUG_ON we now also have GEM_WARN_ON, with the
simple goal of expressing warnings which are truly insane, and so are
only really useful for CI where we have some abusive tests.
v2:
- use BUILD_BUG_ON_INVALID for !DEBUG_GEM
- clarify commit message
Cc: Joonas Lahtinen <[email protected]>
Cc: Chris Wilson <[email protected]>
Suggested-by: Chris Wilson <[email protected]>
Signed-off-by: Matthew Auld <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Chris Wilson <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
|
|
Pull ceph updates from Ilya Dryomov:
"A varied set of changes:
- a large rework of cephx auth code to cope with CONFIG_VMAP_STACK
(myself). Also fixed a deadlock caused by a bogus allocation on the
writeback path and authorize reply verification.
- a fix for long stalls during fsync (Jeff Layton). The client now
has a way to force the MDS log flush, leading to ~100x speedups in
some synthetic tests.
- a new [no]require_active_mds mount option (Zheng Yan).
On mount, we will now check whether any of the MDSes are available
and bail rather than block if none are. This check can be avoided
by specifying the "no" option.
- a couple of MDS cap handling fixes and a few assorted patches
throughout"
* tag 'ceph-for-4.10-rc1' of git://github.com/ceph/ceph-client: (32 commits)
libceph: remove now unused finish_request() wrapper
libceph: always signal completion when done
ceph: avoid creating orphan object when checking pool permission
ceph: properly set issue_seq for cap release
ceph: add flags parameter to send_cap_msg
ceph: update cap message struct version to 10
ceph: define new argument structure for send_cap_msg
ceph: move xattr initialzation before the encoding past the ceph_mds_caps
ceph: fix minor typo in unsafe_request_wait
ceph: record truncate size/seq for snap data writeback
ceph: check availability of mds cluster on mount
ceph: fix splice read for no Fc capability case
ceph: try getting buffer capability for readahead/fadvise
ceph: fix scheduler warning due to nested blocking
ceph: fix printing wrong return variable in ceph_direct_read_write()
crush: include mapper.h in mapper.c
rbd: silence bogus -Wmaybe-uninitialized warning
libceph: no need to drop con->mutex for ->get_authorizer()
libceph: drop len argument of *verify_authorizer_reply()
libceph: verify authorize reply on connect
...
|
|
Signed-off-by: Jeroen De Wachter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Before, encx24j600_rx_packets did not update encx24j600_priv's next_packet
member when an error occurred during packet handling (either because the
packet's RSV header indicates an error or because the encx24j600_receive_packet
method can't allocate an sk_buff).
If the next_packet member is not updated, the ERXTAIL register will be set to
the same value it had before, which means the bad packet remains in the
component's memory and its RSV header will be read again when a new packet
arrives. If the RSV header indicates a bad packet or if sk_buff allocation
continues to fail, new packets will be stored in the component's memory until
that memory is full, after which packets will be dropped.
The SETPKTDEC command is always executed though, so the encx24j600 hardware has
an incorrect count of the packets in its memory.
To prevent this, the next_packet member should always be updated, allowing the
packet to be skipped (either because it's bad, as indicated in its RSV header,
or because allocating an sk_buff failed). In the allocation failure case, this
does mean dropping a valid packet, but dropping the oldest packet to keep as
much memory as possible available for new packets seems preferable to keeping
old (but valid) packets around while dropping new ones.
Signed-off-by: Jeroen De Wachter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The hip04 driver calls into PHYLIB which now checks for
net_device->dev.parent, so make sure we do set it before calling into
any MDIO/PHYLIB related function.
Fixes: ec988ad78ed6 ("phy: Don't increment MDIO bus refcount unless it's a different owner")
Signed-off-by: Dongpo Li <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The hisi_femac driver calls into PHYLIB which now checks for
net_device->dev.parent, so make sure we do set it before calling into
any MDIO/PHYLIB related function.
Fixes: ec988ad78ed6 ("phy: Don't increment MDIO bus refcount unless it's a different owner")
Signed-off-by: Dongpo Li <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
A port is not necessarily assigned to a netdev. And a port does not
need to be a member of a bridge. So when iterating over all ports,
check before using the netdev and bridge_dev for a port. Otherwise we
dereference a NULL pointer.
Fixes: da9c359e19f0 ("net: dsa: mv88e6xxx: check hardware VLAN in use")
Signed-off-by: Andrew Lunn <[email protected]>
Reviewed-by: Vivien Didelot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The timer handling in this driver is broken in several ways:
- corkscrew_open() initializes and arms a timer before requesting the
device interrupt. If the request fails the timer stays armed.
A second call to corkscrew_open will unconditionally reinitialize the
quued timer and arm it again. Also a immediate device removal will leave
the timer queued because close() is not called (open() failed) and
therefore nothing issues del_timer().
The reinitialization corrupts the link chain in the timer wheel hash
bucket and causes a NULL pointer dereference when the timer wheel tries
to operate on that hash bucket. Immediate device removal lets the link
chain poke into freed and possibly reused memory.
Solution: Arm the timer after the successful irq request.
- corkscrew_close() uses del_timer()
On close the timer is disarmed with del_timer() which lets the following
code race against a concurrent timer expiry function.
Solution: Use del_timer_sync() instead
- corkscrew_close() calls del_timer() unconditionally
del_timer() is invoked even if the timer was never initialized. This
works by chance because the struct containing the timer is zeroed at
allocation time.
Solution: Move the setup of the timer into corkscrew_setup().
Reported-by: Matthew Whitehead <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: [email protected]
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
- more ->d_init() stuff (work.dcache)
- pathname resolution cleanups (work.namei)
- a few missing iov_iter primitives - copy_from_iter_full() and
friends. Either copy the full requested amount, advance the iterator
and return true, or fail, return false and do _not_ advance the
iterator. Quite a few open-coded callers converted (and became more
readable and harder to fuck up that way) (work.iov_iter)
- several assorted patches, the big one being logfs removal
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
logfs: remove from tree
vfs: fix put_compat_statfs64() does not handle errors
namei: fold should_follow_link() with the step into not-followed link
namei: pass both WALK_GET and WALK_MORE to should_follow_link()
namei: invert WALK_PUT logics
namei: shift interpretation of LOOKUP_FOLLOW inside should_follow_link()
namei: saner calling conventions for mountpoint_last()
namei.c: get rid of user_path_parent()
switch getfrag callbacks to ..._full() primitives
make skb_add_data,{_nocache}() and skb_copy_to_page_nocache() advance only on success
[iov_iter] new primitives - copy_from_iter_full() and friends
don't open-code file_inode()
ceph: switch to use of ->d_init()
ceph: unify dentry_operations instances
lustre: switch to use of ->d_init()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new Mediatek drivers: mtk-mdp and mtk-vcodec
- some additions at the media documentation
- the CEC core and drivers were promoted from staging to mainstream
- some cleanups at the DVB core
- the LIRC serial driver got promoted from staging to mainstream
- added a driver for Renesas R-Car FDP1 driver
- add DVBv5 statistics support to mn88473 driver
- several fixes related to printk continuation lines
- add support for HSV encoding formats
- lots of other cleanups, fixups and driver improvements.
* tag 'media/v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (496 commits)
[media] v4l: tvp5150: Add missing break in set control handler
[media] v4l: tvp5150: Don't inline the tvp5150_selmux() function
[media] v4l: tvp5150: Compile tvp5150_link_setup out if !CONFIG_MEDIA_CONTROLLER
[media] em28xx: don't store usb_device at struct em28xx
[media] em28xx: use usb_interface for dev_foo() calls
[media] em28xx: don't change the device's name
[media] mn88472: fix chip id check on probe
[media] mn88473: fix chip id check on probe
[media] lirc: fix error paths in lirc_cdev_add()
[media] s5p-mfc: Add support for MFC v8 available in Exynos 5433 SoCs
[media] s5p-mfc: Rework clock handling
[media] s5p-mfc: Don't keep clock prepared all the time
[media] s5p-mfc: Kill all IS_ERR_OR_NULL in clocks management code
[media] s5p-mfc: Remove dead conditional code
[media] s5p-mfc: Ensure that clock is disabled before turning power off
[media] s5p-mfc: Remove special clock rate management
[media] s5p-mfc: Use printk_ratelimited for reporting ioctl errors
[media] s5p-mfc: Set DMA_ATTR_ALLOC_SINGLE_PAGES
[media] vivid: Set color_enc on HSV formats
[media] v4l2-tpg: Init hv_enc field with a valid value
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac
Pull edac updates from Mauro Carvalho Chehab:
"This contains the conversion of the EDAC uAPI documentation to ReST
and the addition of the EDAC kAPI documentation to the driver-api
docs.
It also splits the EDAC headers by their functions"
* tag 'edac/v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
EDAC: Document HW_EVENT_ERR_DEFERRED type
edac.rst: move concepts dictionary from edac.h
edac: fix kenel-doc markups at edac.h
edac: fix kernel-doc tags at the drivers/edac_*.h
edac: adjust docs location at MAINTAINERS and 00-INDEX
driver-api: create an edac.rst file with EDAC documentation
edac: move documentation from edac_mc.c to edac_core.h
edac: move documentation from edac_pci*.c to edac_pci.h
edac: move documentation from edac_device to edac_core.h
edac: rename edac_core.h to edac_mc.h
edac: move EDAC device definitions to drivers/edac/edac_device.h
edac: move EDAC PCI definitions to drivers/edac/edac_pci.h
docs-rst: admin-guide: add documentation for EDAC
edac.txt: Improve documentation, adding RAS introduction
edac.txt: update information about newer Intel CPUs
edac.txt: remove info that the Nehalem EDAC is experimental
edac.txt: convert EDAC documentation to ReST
edac.txt: add a section explaining the dimmX and rankX directories
edac: edac_core.h: remove prototype for edac_pci_reset_delay_period()
edac: edac_core.h: get rid of unused kobj_complete
|
|
Prepare input updates for 4.10 merge window.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Highlights include:
- Support for the kexec_file_load() syscall, which is a prereq for
secure and trusted boot.
- Prevent kernel execution of userspace on P9 Radix (similar to
SMEP/PXN).
- Sort the exception tables at build time, to save time at boot, and
store them as relative offsets to save space in the kernel image &
memory.
- Allow building the kernel with thin archives, which should allow us
to build an allyesconfig once some other fixes land.
- Build fixes to allow us to correctly rebuild when changing the
kernel endian from big to little or vice versa.
- Plumbing so that we can avoid doing a full mm TLB flush on P9
Radix.
- Initial stack protector support (-fstack-protector).
- Support for dumping the radix (aka. Linux) and hash page tables via
debugfs.
- Fix an oops in cxl coredump generation when cxl_get_fd() is used.
- Freescale updates from Scott: "Highlights include 8xx hugepage
support, qbman fixes/cleanup, device tree updates, and some misc
cleanup."
- Many and varied fixes and minor enhancements as always.
Thanks to:
Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anshuman
Khandual, Anton Blanchard, Balbir Singh, Bartlomiej Zolnierkiewicz,
Christophe Jaillet, Christophe Leroy, Denis Kirjanov, Elimar
Riesebieter, Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff
Levand, Jack Miller, Johan Hovold, Lars-Peter Clausen, Libin,
Madhavan Srinivasan, Michael Neuling, Nathan Fontenot, Naveen N.
Rao, Nicholas Piggin, Pan Xinhui, Peter Senna Tschudin, Rashmica
Gupta, Rui Teng, Russell Currey, Scott Wood, Simon Guo, Suraj
Jitindar Singh, Thiago Jung Bauermann, Tobias Klauser, Vaibhav Jain"
[ And thanks to Michael, who took time off from a new baby to get this
pull request done. - Linus ]
* tag 'powerpc-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (174 commits)
powerpc/fsl/dts: add FMan node for t1042d4rdb
powerpc/fsl/dts: add sg_2500_aqr105_phy4 alias on t1024rdb
powerpc/fsl/dts: add QMan and BMan nodes on t1024
powerpc/fsl/dts: add QMan and BMan nodes on t1023
soc/fsl/qman: test: use DEFINE_SPINLOCK()
powerpc/fsl-lbc: use DEFINE_SPINLOCK()
powerpc/8xx: Implement support of hugepages
powerpc: get hugetlbpage handling more generic
powerpc: port 64 bits pgtable_cache to 32 bits
powerpc/boot: Request no dynamic linker for boot wrapper
soc/fsl/bman: Use resource_size instead of computation
soc/fsl/qe: use builtin_platform_driver
powerpc/fsl_pmc: use builtin_platform_driver
powerpc/83xx/suspend: use builtin_platform_driver
powerpc/ftrace: Fix the comments for ftrace_modify_code
powerpc/perf: macros for power9 format encoding
powerpc/perf: power9 raw event format encoding
powerpc/perf: update attribute_group data structure
powerpc/perf: factor out the event format field
powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull m ore s390 updates from Martin Schwidefsky:
"Over 95% of the changes in this pull request are related to the zcrypt
driver. There are five improvements for zcrypt: the ID for the CEX6
cards is added, workload balancing and multi-domain support are
introduced, the debug logs are overhauled and a set of tracepoints is
added.
Then there are several patches in regard to inline assemblies. One
compile fix and several missing memory clobbers. As far as we can tell
the omitted memory clobbers have not caused any breakage.
A small change to the PCI arch code, the machine can tells us how big
the function measurement blocks are. The PCI function measurement will
be disabled for a device if the queried length is larger than the
allocated size for these blocks.
And two more patches to correct five printk messages.
That is it for s390 in regard to the 4.10 merge window. Happy holidays"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (23 commits)
s390/pci: query fmb length
s390/zcrypt: add missing memory clobber to ap_qci inline assembly
s390/extmem: add missing memory clobber to dcss_set_subcodes
s390/nmi: fix inline assembly constraints
s390/lib: add missing memory barriers to string inline assemblies
s390/cpumf: fix qsi inline assembly
s390/setup: reword printk messages
s390/dasd: fix typos in DASD error messages
s390: fix compile error with memmove_early() inline assembly
s390/zcrypt: tracepoint definitions for zcrypt device driver.
s390/zcrypt: Rework debug feature invocations.
s390/zcrypt: Improved invalid domain response handling.
s390/zcrypt: Fix ap_max_domain_id for older machine types
s390/zcrypt: Correct function bits for CEX2x and CEX3x cards.
s390/zcrypt: Fixed attrition of AP adapters and domains
s390/zcrypt: Introduce new zcrypt device status API
s390/zcrypt: add multi domain support
s390/zcrypt: Introduce workload balancing
s390/zcrypt: get rid of ap_poll_requests
s390/zcrypt: header for the AP inline assmblies
...
|
|
Colin, via static analysis, reports that the length could be negative
from nvdimm_clear_poison() in the error case. There was a similar
problem with commit 0a3f27b9a6a8 "libnvdimm, namespace: avoid multiple
sector calculations" that I noticed when merging the for-4.10/libnvdimm
topic branch into libnvdimm-for-next, but I missed this one. Fix both of
them to the following procedure:
* if we clear a block's worth of media, clear that many blocks in
badblocks
* if we clear less than the requested size of the transfer return an
error
* always invalidate cache after any non-error / non-zero
nvdimm_clear_poison result
Fixes: 82bf1037f2ca ("libnvdimm: check and clear poison before writing to pmem")
Fixes: 0a3f27b9a6a8 ("libnvdimm, namespace: avoid multiple sector calculations")
Cc: Fabian Frederick <[email protected]>
Cc: Dave Jiang <[email protected]>
Reported-by: Colin Ian King <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
|
|
If we remember that node_list is a circular list containing the fake
head_node, we can use a simple list_next_entry() and skip the NULL check
for the allocated check against the head_node.
Signed-off-by: Chris Wilson <[email protected]>
Reviewed-by: Joonas Lahtinen <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This adds IT8620E chip ID to it87_wdt driver.
Such chip is often found on current Gigabyte motherboards, it is allegedly
custom made for this manufacturer.
Upon testing it looks like it has a 16-bit timer and cannot be reset via
game port (only via CIR), so it is similar to IT87{18,20,21,28,83} chips.
Tested on GA-F2A88XM-HD3P board.
Signed-off-by: Maciej S. Szmigiero <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
watchdog/mpc8xxx_wdt.c does not use any miscdevice so this patch remove
this unnecessary inclusion.
Signed-off-by: Corentin Labbe <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
watchdog/octeon-wdt-main.c does not use any miscdevice so this patch
remove this unnecessary inclusion.
Signed-off-by: Corentin Labbe <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
A bootloader may start the watchdog device before handing control to
the kernel - in that case, we should tell the kernel about it so the
watchdog framework can keep it alive until userspace opens
/dev/watchdog0.
Signed-off-by: Rasmus Villemoes <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Acked-by: Eric Anholt <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
Add watchdog timer specific driver for Loongson1 SoC.
Signed-off-by: Yang Ling <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
Replaced goto with a return statement and dropped the kfree()
calls because memory allocated with devm_kzalloc() is
automatically freed on driver detach
Signed-off-by: Amit Kushwaha <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
The of_device_id match array is added to support "dlg,da9062-watchdog"
as a valid .compatible string. A MODULE_DEVICE_TABLE() macro is added.
This patch assumes the use of a DA9062 fallback compatible string for the
DTS to pick up the DA9062 device driver for use with the DA9061 watchdog
hardware
Copyright header is updated to add DA9061 in its description and the module
description macro is extended to include DA9061.
Kconfig is updated to reflect support for DA9061/62.
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Steve Twiss <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
Error code when printed is more readable if it's represented as plain decimal
integer. Otherwise user will see something like
intel_mid_wdt: Error stopping watchdog: 0xffffffed
which is not quite understandable ("Should I interpret it as a bitfield?").
Make it clear to use plaint integer specifier.
While here, move struct device *dev local variable definition to the top of
functions.
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
Make sure that the watchdog is not running after loading
and before it is started by opening /dev/watchdog.
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
Systemd on reboot enables shutdown watchdog that leaves the watchdog
device open to ensure that even if power down process get stuck the
platform reboots nonetheless.
The iamt_wdt is an alarm-only watchdog and can't reboot system, but the
FW will generate an alarm event reboot was completed in time, as the
watchdog is not automatically disabled during power cycle.
So we should request stop watchdog on reboot to eliminate wrong alarm
from the FW.
Cc: <[email protected]>
Signed-off-by: Alexander Usyskin <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
Compiling this driver as a module causes a build error because a
semicolon is missing after MODULE_DEVICE_TABLE. Add it.
CC [M] drivers/watchdog/jz4740_wdt.o
drivers/watchdog/jz4740_wdt.c:154:1: error: expected ‘,’ or ‘;’ before ‘static’
drivers/watchdog/jz4740_wdt.c:218:11: error: ‘jz4740_wdt_probe’ undeclared here (not in a function)
Cc: Zubair Lutfullah Kakakhel <[email protected]>
Cc: Guenter Roeck <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
This patch fixes a off-by-one in the "watchdog: qcom: add option for
standalone watchdog not in timer block" patch that causes the
following panic on boot:
> Unhandled fault: external abort on non-linefetch (0x1008) at 0xc8874002
> pgd = c0204000
> [c8874002] *pgd=87806811, *pte=0b017653, *ppte=0b017453
> Internal error: : 1008 [#1] SMP ARM
> CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.8.6 #0
> Hardware name: Generic DT based system
> PC is at 0xc02222f4
> LR is at 0x1
> pc : [<c02222f4>] lr : [<00000001>] psr: 00000113
> sp : c782fc98 ip : 00000003 fp : 00000000
> r10: 00000004 r9 : c782e000 r8 : c04ab98c
> r7 : 00000001 r6 : c8874002 r5 : c782fe00 r4 : 00000002
> r3 : 00000000 r2 : c782fe00 r1 : 00100000 r0 : c8874002
> Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
> Control: 10c5387d Table: 8020406a DAC: 00000051
> Process swapper/0 (pid: 1, stack limit = 0xc782e210)
> Stack: (0xc782fc98 to 0xc7830000)
> [...]
The WDT_STS (status) needs to be translated via wdt_addr as well.
fixes: f0d9d0f4b44a ("watchdog: qcom: add option for standalone watchdog not in timer block")
Cc: [email protected] # 4.8
Signed-off-by: Christian Lamparter <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
devm_clk_get can fail with EPROBE_DEFER in case the clock provider is
not ready yet. Handle this case gracefully, rather than dumping out
a huge warning.
Signed-off-by: Tero Kristo <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
The Amlogic Meson is a DT-only platform, which means the devices are
registered via OF and not using the legacy platform devices support.
So there's no need to have a MODULE_ALIAS("platform:meson-gxbb-wdt")
since the reported uevent MODALIAS to user-space will be the OF one.
Signed-off-by: Javier Martinez Canillas <[email protected]>
Acked-by: Kevin Hilman <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
Replace small number of lines using leading spaces with proper leading
tabs and spaces -- purely an aesthetic fix.
Signed-off-by: Robert P. J. Day <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|