aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2016-02-05Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds4-7/+9
Pull watchdog fixes from Wim Van Sebroeck: "This fixes several Kconfig dependencies, a compilation warning in pcwd_usb, a failure to abort the sp805 wdt after a ping and the max63xx wdt's MODULE_LICENSE" * git://www.linux-watchdog.org/linux-watchdog: watchdog: Fix dependencies for !HAS_IOMEM archs watchdog: imgdpc: select WATCHDOG_CORE watchdog: tango: rename ARCH_TANGOX to ARCH_TANGO watchdog: pcwd_usb: fix compilation warning watchdog: sp805: ping fails to abort wdt reset watchdog: max63xx: make module's license marker match the header
2016-02-05Merge branch 'drm-fixes-mst' of git://people.freedesktop.org/~airlied/linux ↵Dave Airlie1-97/+182
into drm-fixes displayport multistream fixes from AMD. * 'drm-fixes-mst' of git://people.freedesktop.org/~airlied/linux: drm/dp/mst: deallocate payload on port destruction drm/dp/mst: Reverse order of MST enable and clearing VC payload table. drm/dp/mst: move GUID storage from mgr, port to only mst branch drm/dp/mst: change MST detection scheme drm/dp/mst: Calculate MST PBN with 31.32 fixed point drm: Add drm_fixp_from_fraction and drm_fixp2int_ceil drm/mst: Add range check for max_payloads during init drm/mst: Don't ignore the MST PBN self-test result drm: fix missing reference counting decrease
2016-02-05drm/dp/mst: deallocate payload on port destructionMykola Lysenko1-8/+83
This is needed to properly deallocate port payload after downstream branch get unplugged. In order to do this unplugged MST topology should be preserved, to find first alive port on path to unplugged MST topology, and send payload deallocation request to branch device of found port. For this mstb and port kref's are used in reversed order to track when port and branch memory could be freed. Added additional functions to find appropriate mstb as described above. Signed-off-by: Mykola Lysenko <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]>
2016-02-05drm/dp/mst: Reverse order of MST enable and clearing VC payload table.Andrey Grodzovsky1-6/+6
On DELL U3014 if you clear the table before enabling MST it sometimes hangs the receiver. Signed-off-by: Andrey Grodzovsky <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Cc: [email protected] Acked-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2016-02-05drm/dp/mst: move GUID storage from mgr, port to only mst branchHersen Wu1-36/+28
Previous implementation does not handle case below: boot up one MST branch to DP connector of ASIC. After boot up, hot plug 2nd MST branch to DP output of 1st MST, GUID is not created for 2nd MST branch. When downstream port of 2nd MST branch send upstream request, it fails because 2nd MST branch GUID is not available. New Implementation: only create GUID for MST branch and save it within Branch. Signed-off-by: Hersen Wu <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Cc: [email protected] Acked-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2016-02-05drm/dp/mst: change MST detection schemeMykola Lysenko1-18/+19
1. Get edid for all connected MST displays, not only on logical ports, in the same thread as MST topology detection is done: There are displays that have branches inside w/o logical ports. So in case another SST display connected downstream system can end-up in situation when 3 DOWN requests sent: two for ‘remote i2c read’ and one for ‘enum path resources’, making slots full. 2. Call notification callback in one place in the end of topology discovery/update: This is done to reduce number of events sent to userspace in case complex topology discovery is going, adding multiple number of connectors; 3. Remove notification callback call from short pulse interrupt processing function: This is done in order not to block interrupt processing function, in case any MST request will be made from it. Notification will be send from topology discovery/update work item. Signed-off-by: Mykola Lysenko <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Cc: [email protected] Acked-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2016-02-05drm/dp/mst: Calculate MST PBN with 31.32 fixed pointHarry Wentland1-28/+39
Our PBN value overflows the 20 bits integer part of the 20.12 fixed point. We need to use 31.32 fixed point to avoid this. This happens with display clocks larger than 293122 (at 24 bpp), which we see with the Sharp (and similar) 4k tiled displays. Signed-off-by: Harry Wentland <[email protected]> Cc: [email protected] Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2016-02-05drm/mst: Add range check for max_payloads during initImre Deak1-0/+3
max_payload is limited by the space we have in drm_dp_mst_topology_mgr::vcpi_mask,payload_mask. We need to track max_payloads+1 IDs in these masks, see drm_dp_mst_assign_payload_id(). Add a sanity check for this. Caught by coverity. Signed-off-by: Imre Deak <[email protected]> Reviewed-by: David Weinehall <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2016-02-05drm/mst: Don't ignore the MST PBN self-test resultImre Deak1-1/+3
Otherwise this call would have no effect. Caught by Coverity. Signed-off-by: Imre Deak <[email protected]> Reviewed-by: David Weinehall <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2016-02-05drm: fix missing reference counting decreaseInsu Yun1-0/+1
In drm_dp_mst_allocate_vcpi, it returns true in two paths, but in one path, there is no reference couting decrease. Signed-off-by: Insu Yun <[email protected]> Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]>
2016-02-05Merge branch 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie11-59/+114
into drm-fixes - fix and enable iceland/topaz support - handle WC on platforms that don't support it * 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: disable uvd and vce clockgating on Fiji drm/amdgpu: remove exp hardware support from iceland drm/amdgpu: load MEC ucode manually on iceland drm/amdgpu: don't load MEC2 on topaz drm/amdgpu: drop topaz support from gmc8 module drm/amdgpu: pull topaz gmc bits into gmc_v7 drm/amdgpu: The VI specific EXE bit should only apply to GMC v8.0 above drm/amdgpu: iceland use CI based MC IP drm/amdgpu: move gmc7 support out of CIK dependency drm/amdgpu/gfx7: enable cp inst/reg error interrupts drm/amdgpu/gfx8: enable cp inst/reg error interrupts drm/amdgpu: mask out WC from BO on unsupported arches drm/radeon: mask out WC from BO on unsupported arches drm: add helper to check for wc memory support drm/amdgpu: no need to load MC firmware on fiji
2016-02-05Merge tag 'drm-amdkfd-fixes-2016-01-28' of ↵Dave Airlie3-3/+3
git://people.freedesktop.org/~gabbayo/linux into drm-fixes two static checker fixes. * tag 'drm-amdkfd-fixes-2016-01-28' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: Remove unnecessary cast in kfree drm/amdgpu: fix non-ANSI declaration of amdgpu_amdkfd_gfx_*_get_functions()
2016-02-05Merge branch 'exynos-drm-fixes' of ↵Dave Airlie3-38/+29
git://git.kernel.org:/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Just regression fixes. - Fix build warning and error without PM configuration - Fix no display issue on Snow board reported by Michal Suchanek, http://www.spinics.net/lists/dri-devel/msg99473.html * 'exynos-drm-fixes' of git://git.kernel.org:/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: dp: Fix panel and bridge lookup logic drm: exynos: make PM functions as __maybe_unused drm/exynos: fix building without CONFIG_PM_SLEEP
2016-02-05Merge branch 'drm/adv7511' of ↵Dave Airlie2-25/+35
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into drm-fixes misc adv7511 edid reading fixes. * 'drm/adv7511' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: drm: adv7511: it's HPD, not HDP drm: adv7511: mark ADV7511_REG_EDID_READ_CTRL volatile drm: adv7511: really enable interrupts for EDID detection
2016-02-05Merge tag 'drm-intel-fixes-2016-02-04' of ↵Dave Airlie5-13/+28
git://anongit.freedesktop.org/drm-intel into drm-fixes misc i915 fixes. * tag 'drm-intel-fixes-2016-02-04' of git://anongit.freedesktop.org/drm-intel: drm/i915: refine qemu south bridge detection drm/i915: Remove select to deleted STOP_MACHINE from Kconfig drm/i915: Fix NULL plane->fb oops on SKL drm/i915: Don't reject primary plane windowing with color keying enabled on SKL+ drm/i915/dp: fall back to 18 bpp when sink capability is unknown drm/i915: Make sure DC writes are coherent on flush.
2016-02-04xhci: harden xhci_find_next_ext_cap against device removalJoe Lawrence1-0/+4
xhci_find_next_ext_cap doesn't check for PCI hotplug removal and may use the PCI master abort bit pattern (~0) to calculate a new PCI address offset to read/write. The has lead to reproducable crashes when testing surprise removal during device initialization on a Stratus platform, at least after commit d5ddcdf4d672 ("xhci: rework xhci extended capability list parsing functions"). The crash is repeatable on a Stratus platform when injecting hardware faults to induce xHCI host controller hotplug during driver initialization. If a PCI read in xhci_find_next_ext_cap returns the master abort pattern, quirk_usb_handoff_xhci may start using a bogus ext_cap_offset to start searching more bogus PCI addresses. Signed-off-by: Joe Lawrence <[email protected]> Acked-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2016-02-04Merge tag 'fixes-for-v4.5-rc3' of ↵Greg Kroah-Hartman6-31/+38
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v4.5-rc2 DWC3 got a fix for OTG Certification, DWC2 has two fixes for regressions on RasPI, MUSB has a NULL pointer dereference fix for ux500 platforms and two PHYs (MSM and MXS) got some minor fixes. While at that, I'm also adding a fix to my email address which has changed recently.
2016-02-04Merge branch 'for-linus' of ↵Linus Torvalds6-56/+58
git://git.kernel.org/pub/scm/linux/kernel/git/shli/md Pull MD fix from Shaohua Li: "As you know, Neil steps down from MD. I'm looking after it. Here are some patches queued. A build fix from Gayatri and several trival patches from me" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: md-cluster: delete useless code md-cluster: fix missing memory free raid6/algos.c : bug fix : Add the missing definitions to the pq.h file MD: add myself as MD maintainer MD: rename some functions
2016-02-04Merge tag 'for-linus' of ↵Linus Torvalds99-53081/+20
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: - One minor fix to the ib core - Four minor fixes to the Mellanox drivers - Remove three deprecated drivers from staging/rdma now that all of Greg's queued changes to them are merged * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: staging/rdma: remove deprecated ipath driver staging/rdma: remove deprecated ehca driver staging/rdma: remove deprecated amso1100 driver IB/core: Set correct payload length for RoCEv2 over IPv6 IB/mlx5: Use MLX5_GET to correctly get end of padding mode IB/mlx5: Fix use of null pointer PD IB/mlx5: Fix reqlen validation in mlx5_ib_alloc_ucontext IB/mlx5: Add CREATE_CQ and CREATE_QP to uverbs_ex_cmd_mask
2016-02-04[media] saa7134-alsa: Only frees registered sound cardsMauro Carvalho Chehab1-1/+4
That prevents this bug: [ 2382.269496] BUG: unable to handle kernel NULL pointer dereference at 0000000000000540 [ 2382.270013] IP: [<ffffffffa01fe616>] snd_card_free+0x36/0x70 [snd] [ 2382.270013] PGD 0 [ 2382.270013] Oops: 0002 [#1] SMP [ 2382.270013] Modules linked in: saa7134_alsa(-) tda1004x saa7134_dvb videobuf2_dvb dvb_core tda827x tda8290 tuner saa7134 tveeprom videobuf2_dma_sg videobuf2_memops videobuf2_v4l2 videobuf2_core v4l2_common videodev media auth_rpcgss nfsv4 dns_resolver nfs lockd grace sunrpc tun bridge stp llc ebtables ip6table_filter ip6_tables nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack it87 hwmon_vid snd_hda_codec_idt snd_hda_codec_generic iTCO_wdt iTCO_vendor_support snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq pcspkr i2c_i801 snd_seq_device snd_pcm snd_timer lpc_ich snd mfd_core soundcore binfmt_misc i915 video i2c_algo_bit drm_kms_helper drm r8169 ata_generic serio_raw pata_acpi mii i2c_core [last unloaded: videobuf2_memops] [ 2382.270013] CPU: 0 PID: 4899 Comm: rmmod Not tainted 4.5.0-rc1+ #4 [ 2382.270013] Hardware name: PCCHIPS P17G/P17G, BIOS 080012 05/14/2008 [ 2382.270013] task: ffff880039c38000 ti: ffff88003c764000 task.ti: ffff88003c764000 [ 2382.270013] RIP: 0010:[<ffffffffa01fe616>] [<ffffffffa01fe616>] snd_card_free+0x36/0x70 [snd] [ 2382.270013] RSP: 0018:ffff88003c767ea0 EFLAGS: 00010286 [ 2382.270013] RAX: ffff88003c767eb8 RBX: 0000000000000000 RCX: 0000000000006260 [ 2382.270013] RDX: ffffffffa020a060 RSI: ffffffffa0206de1 RDI: ffff88003c767eb0 [ 2382.270013] RBP: ffff88003c767ed8 R08: 0000000000019960 R09: ffffffff811a5412 [ 2382.270013] R10: ffffea0000d7c200 R11: 0000000000000000 R12: ffff88003c767ea8 [ 2382.270013] R13: 00007ffe760617f7 R14: 0000000000000000 R15: 0000557625d7f1e0 [ 2382.270013] FS: 00007f80bb1c0700(0000) GS:ffff88003f400000(0000) knlGS:0000000000000000 [ 2382.270013] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 2382.270013] CR2: 0000000000000540 CR3: 000000003c00f000 CR4: 00000000000006f0 [ 2382.270013] Stack: [ 2382.270013] 000000003c767ed8 ffffffff00000000 ffff880000000000 ffff88003c767eb8 [ 2382.270013] ffff88003c767eb8 ffffffffa049a890 00007ffe76060060 ffff88003c767ef0 [ 2382.270013] ffffffffa049889d ffffffffa049a500 ffff88003c767f48 ffffffff8111079c [ 2382.270013] Call Trace: [ 2382.270013] [<ffffffffa049889d>] saa7134_alsa_exit+0x1d/0x780 [saa7134_alsa] [ 2382.270013] [<ffffffff8111079c>] SyS_delete_module+0x19c/0x1f0 [ 2382.270013] [<ffffffff8170fc2e>] entry_SYSCALL_64_fastpath+0x12/0x71 [ 2382.270013] Code: 20 a0 48 c7 c6 e1 6d 20 a0 48 89 e5 41 54 53 4c 8d 65 d0 48 89 fb 48 83 ec 28 c7 45 d0 00 00 00 00 49 8d 7c 24 08 e8 7a 55 ed e0 <4c> 89 a3 40 05 00 00 48 89 df e8 eb fd ff ff 85 c0 75 1a 48 8d [ 2382.270013] RIP [<ffffffffa01fe616>] snd_card_free+0x36/0x70 [snd] [ 2382.270013] RSP <ffff88003c767ea0> [ 2382.270013] CR2: 0000000000000540 Cc: [email protected] Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2016-02-04[media] vb2-core: call threadio->fnc() if !VB2_BUF_STATE_ERRORMauro Carvalho Chehab1-1/+1
changeset 70433a152f0 ("media: videobuf2: Refactor vb2_fileio_data and vb2_thread") broke videobuf2-dvb. The root cause is that, instead of calling threadio->fnc() for all types of events except for VB2_BUF_STATE_ERROR, it was calling it only for VB2_BUF_STATE_DONE. With that, the DVB thread were never called. Cc: [email protected] # Kernel >= 4.3 Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2016-02-04[media] vb2: fix nasty vb2_thread regressionHans Verkuil2-53/+44
The vb2_thread implementation was made generic and was moved from videobuf2-v4l2.c to videobuf2-core.c in commit af3bac1a. Unfortunately that clearly was never tested since it broke read() causing NULL address references. The root cause was confused handling of vb2_buffer vs v4l2_buffer (the pb pointer in various core functions). The v4l2_buffer no longer exists after moving the code into the core and it is no longer needed. However, the vb2_thread code passed a pointer to a vb2_buffer to the core functions were a v4l2_buffer pointer was expected and vb2_thread expected that the vb2_buffer fields would be filled in correctly. This is obviously wrong since v4l2_buffer != vb2_buffer. Note that the pb pointer is a void pointer, so no type-checking took place. This patch fixes this problem: 1) allow pb to be NULL for vb2_core_(d)qbuf. The vb2_thread code will use a NULL pointer here since they don't care about v4l2_buffer anyway. 2) let vb2_core_dqbuf pass back the index of the received buffer. This is all vb2_thread needs: this index is the index into the q->bufs array and vb2_thread just gets the vb2_buffer from there. 3) the fileio->b pointer (that originally contained a v4l2_buffer) is removed altogether since it is no longer needed. Tested with vivid and the cobalt driver. Cc: [email protected] # Kernel >= 4.3 Signed-off-by: Hans Verkuil <[email protected]> Reported-by: Matthias Schwarzott <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2016-02-04[media] tda1004x: only update the frontend properties if lockedMauro Carvalho Chehab1-0/+9
The tda1004x was updating the properties cache before locking. If the device is not locked, the data at the registers are just random values with no real meaning. This caused the driver to fail with libdvbv5, as such library calls GET_PROPERTY from time to time, in order to return the DVB stats. Tested with a saa7134 card 78: ASUSTeK P7131 Dual, vendor PCI ID: 1043:4862 Cc: [email protected] Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2016-02-03Merge branch 'mymd/for-next' into mymd/for-linusShaohua Li6-56/+58
2016-02-03xhci: Fix list corruption in urb dequeue at host removalMathias Nyman1-1/+3
xhci driver frees data for all devices, both usb2 and and usb3 the first time usb_remove_hcd() is called, including td_list and and xhci_ring structures. When usb_remove_hcd() is called a second time for the second xhci bus it will try to dequeue all pending urbs, and touches td_list which is already freed for that endpoint. Cc: <[email protected]> Reported-by: Joe Lawrence <[email protected]> Tested-by: Joe Lawrence <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2016-02-03usb: host: xhci-plat: fix NULL pointer in probe for device tree caseGregory CLEMENT1-1/+2
During probe, in the device tree case, the data pointer associated to a compatible is dereferenced. However, not all the compatibles are associated to a private data pointer. The generic-xhci and the xhci-platform don't need them, this patch adds a test on the data pointer before accessing it, avoiding a kernel crash. Fixes: 4efb2f694114 ("usb: host: xhci-plat: add struct xhci_plat_priv") Cc: [email protected] Signed-off-by: Gregory CLEMENT <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2016-02-03usb: xhci-mtk: fix AHB bus hang up caused by roothubs pollingChunfeng Yun1-0/+23
when ip fails to enter sleep mode, register access protection will be disabled, at the same time if all clocks are disabled, access register will hang up AHB bus. the common case causes ip sleep failure is that after all ports enter U3 but before ip enters sleep mode, a port receives a resume signal('K'). this will happens when such as clicks mouse to try to do remote-wakeup to stop system enter suspend. so stop polling root hubs to avoid access xHCI register on bus suspend, and restart it when bus resumes. Signed-off-by: Chunfeng Yun <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2016-02-03usb: xhci-mtk: fix bpkts value of LS/HS periodic eps not behind TTChunfeng Yun1-3/+13
when a LS or FS device doesn't connect though a HS hub, the @bPkts field of its periodic endpoint context should be set to 1. Signed-off-by: Chunfeng Yun <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2016-02-03usb: xhci: apply XHCI_PME_STUCK_QUIRK to Intel Broxton-M platformsLu Baolu1-1/+3
Intel Broxton M was verifed to require XHCI_PME_STUCK_QUIRK quirk as well. Cc: [email protected] Signed-off-by: Lu Baolu <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2016-02-03usb: xhci: set SSIC port unused only if xhci_suspend succeedsLu Baolu1-1/+6
XHCI_SSIC_PORT_UNUSED quirk was applied to the xHCI host controllers in some Intel SoC chips. With this quirk applied, SSIC port is set to "unused" prior to xhci_suspend(). This may cause problem if host fails to suspend. In this case, the port is set to unused without host further entering D3, and the port will not be usable anymore. Cc: [email protected] Signed-off-by: Zhuang Jin Can <[email protected]> Signed-off-by: Lu Baolu <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2016-02-03usb: xhci: add a quirk bit for ssic port unusedLu Baolu2-34/+46
Two workarounds introduced by commit b8cb91e058cd ("xhci: Workaround for PME stuck issues in Intel xhci") and commit abce329c27b3 ("xhci: Workaround to get D3 working in Intel xHCI") share a single quirk bit XHCI_PME_STUCK_QUIRK. These two workarounds actually are different and might happen on different hardwares. Need to separate them by adding a quirk bit for the later. Cc: [email protected] Signed-off-by: Lu Baolu <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2016-02-03usb: xhci: handle both SSIC ports in PME stuck quirkLu Baolu1-19/+29
Commit abce329c27b3 ("xhci: Workaround to get D3 working in Intel xHCI") adds a workaround for a limitation of PME storm caused by SSIC port in some Intel SoCs. This commit only handled one SSIC port, while there are actually two SSIC ports in the chips. This patch handles both SSIC ports. Without this fix, users still see PME storm. Cc: [email protected] # v4.2+ Signed-off-by: Zhuang Jin Can <[email protected]> Signed-off-by: Lu Baolu <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2016-02-03usb: dwc3: gadget: set the OTG flag in dwc3 gadget driver.Jianqiang Tang1-0/+1
This patch is needed in order to pass one test case defined in the OTG Automated Compliance Test specification. Specification location: http://www.usb.org/developers/onthego/otgeh_compliance_plan_1_2.pdf This test case uses PET Tool, and PET Tool is one USB hardware equipment provided by MQP Electronics. Test case id is 6.8.3 B-UUT Bypass Capacitance. We must set this otg flag in order to be able to return OTG descriptor during enumeration, otherwise this test case with failed with below error: "Get OTG descriptor request stalled". Signed-off-by: Jianqiang Tang <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2016-02-03Revert "xhci: don't finish a TD if we get a short-transfer event mid TD"Mathias Nyman1-10/+0
This reverts commit e210c422b6fd ("xhci: don't finish a TD if we get a short transfer event mid TD") Turns out that most host controllers do not follow the xHCI specs and never send the second event for the last TRB in the TD if there was a short event mid-TD. Returning the URB directly after the first short-transfer event is far better than never returning the URB. (class drivers usually timeout after 30sec). For the hosts that do send the second event we will go back to treating it as misplaced event and print an error message for it. The origial patch was sent to stable kernels and needs to be reverted from there as well Cc: [email protected] Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2016-02-03drm/amdgpu: disable uvd and vce clockgating on FijiAlex Deucher1-2/+1
Doesn't work properly yet. Reviewed-by: Christian König <[email protected]> Reviewed-by: Sonny Jiang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2016-02-03usb: dwc2: Fix probe problem on bcm2835John Youn1-6/+0
Fixes an issue found on Raspberry PI platform that prevents probe. Don't skip setting the force mode if it's already set. Fixes: 09c96980dc72 ("usb: dwc2: Add functions to set and clear force mode") Tested-by: Heiko Stuebner <[email protected]> Tested-by: Douglas Anderson <[email protected]> Signed-off-by: John Youn <[email protected]> Reported-by: Stefan Wahren <[email protected]> Reported-by: Remi Pommarel <[email protected]> Tested-by: Stefan Wahren <[email protected]> Tested-by: Remi Pommarel <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2016-02-03Revert "usb: dwc2: Move reset into dwc2_get_hwparams()"John Youn2-9/+7
This reverts commit 263b7fb557f7 ("usb: dwc2: Move reset into dwc2_get_hwparams()") due to regression found on bcm2835 platform. USB ethernet fails, due to being unable to pick up proper parameters when performing a plain reset before reading hw params. Below shows the results of the gnptxfsiz and hptxfsiz with and before and after reverting this (from Stefan Wahren): So here is the probe result before Patch 1 is applied: [ 1.283148] dwc2 20980000.usb: Configuration mismatch. dr_mode forced to host [ 1.313894] dwc2 20980000.usb: gnptxfsiz=00201000 [ 1.314104] dwc2 20980000.usb: hptxfsiz=00000000 [ 1.353908] dwc2 20980000.usb: 256 invalid for host_nperio_tx_fifo_size. Check HW configuration. [ 1.354262] dwc2 20980000.usb: 512 invalid for host_perio_tx_fifo_size. Check HW configuration. [ 1.394249] dwc2 20980000.usb: DWC OTG Controller [ 1.394561] dwc2 20980000.usb: new USB bus registered, assigned bus number 1 [ 1.394917] dwc2 20980000.usb: irq 33, io mem 0x00000000 And here is the probe result after Patch 1 is applied: [ 1.280107] dwc2 20980000.usb: Configuration mismatch. dr_mode forced to host [ 1.353949] dwc2 20980000.usb: gnptxfsiz=01001000 [ 1.354166] dwc2 20980000.usb: hptxfsiz=02002000 [ 1.434301] dwc2 20980000.usb: DWC OTG Controller [ 1.434616] dwc2 20980000.usb: new USB bus registered, assigned bus number 1 [ 1.434973] dwc2 20980000.usb: irq 33, io mem 0x00000000 Tested-by: Heiko Stuebner <[email protected]> Tested-by: Douglas Anderson <[email protected]> Signed-off-by: John Youn <[email protected]> Reported-by: Stefan Wahren <[email protected]> Reported-by: Remi Pommarel <[email protected]> Tested-by: Stefan Wahren <[email protected]> Tested-by: Remi Pommarel <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2016-02-03PM: Avoid false-positive warnings in dev_pm_domain_set()Rafael J. Wysocki1-1/+1
There is a WARN_ON() in dev_pm_domain_set() that triggers on attempts to set the pm_domain pointer for devices with a driver bound. However, that WARN_ON() triggers on attempts to clear the pointer too and the test it uses is based on checking the device's p->knode_driver pointer which still is set when the device bus type's/driver's ->remove callback has been executed. This leads to false-positive warnings when bus type code calls dev_pm_domain_set() to clear the pm_domain pointer after invoking the driver's ->remove() callback. To avoid those false-positives, make dev_pm_domain_set() check if the pointer passed to it is NULL and skip the warning in that case. Fixes: 989561de9b51 (PM / Domains: add setter for dev.pm_domain) Signed-off-by: Rafael J. Wysocki <[email protected]> Tested-by: Andy Shevchenko <[email protected]> Tested-by: Sinan Kaya <[email protected]> Tested-by: Steven Rostedt <[email protected]> Acked-by: Ulf Hansson <[email protected]>
2016-02-03Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-1/+5
Merge fixes from Andrew Morton: "18 fixes" [ The 18 fixes turned into 17 commits, because one of the fixes was a fix for another patch in the series that I just folded in by editing the patch manually - hopefully correctly - Linus ] * emailed patches from Andrew Morton <[email protected]>: mm: fix memory leak in copy_huge_pmd() drivers/hwspinlock: fix race between radix tree insertion and lookup radix-tree: fix race in gang lookup mm/vmpressure.c: fix subtree pressure detection mm: polish virtual memory accounting mm: warn about VmData over RLIMIT_DATA Documentation: cgroup-v2: add memory.stat::sock description mm: memcontrol: drop superfluous entry in the per-memcg stats array drivers/scsi/sg.c: mark VMA as VM_IO to prevent migration proc: revert /proc/<pid>/maps [stack:TID] annotation numa: fix /proc/<pid>/numa_maps for hugetlbfs on s390 MAINTAINERS: update Seth email ocfs2/cluster: fix memory leak in o2hb_region_release lib/test-string_helpers.c: fix and improve string_get_size() tests thp: limit number of object to scan on deferred_split_scan() thp: change deferred_split_count() to return number of THP in queue thp: make split_queue per-node
2016-02-03Merge tag 'for-linus-4.5-2' of git://git.code.sf.net/p/openipmi/linux-ipmiLinus Torvalds1-2/+1
Pull IPMI fix from Corey Minyard: "Fix a compile error on IPMI when ACPI is disabled" * tag 'for-linus-4.5-2' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi: put acpi.h with the other headers
2016-02-03usb: musb: ux500: Fix NULL pointer dereference at system PMUlf Hansson1-2/+5
The commit 7d32cdef5356 ("usb: musb: fail with error when no DMA controller set"), caused the core platform driver to correctly return an error code when fail probing. Unfurtante it also caused bug for a NULL pointer dereference, during system suspend for the ux500 driver. The reason is a lacking validation of the corresponding ->driver_data pointer, which won't be set when the musb core driver fails to probe (or haven't yet been probed). Fixes: 7d32cdef5356 ("usb: musb: fail with error when no DMA...") Acked-by: Linus Walleij <[email protected]> Signed-off-by: Ulf Hansson <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2016-02-03usb: phy: mxs: declare variable with initialized valueLi Jun1-1/+1
Initialize vbus_value to be 0 since it's possible not to assign any value before judgement. Acked-by: Peter Chen <[email protected] Signed-off-by: Li Jun <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2016-02-03usb: phy: msm: fix error handling in probe.Srinivas Kandagatla1-13/+24
This driver registers for extcon events as part of its probe, but never unregisters them in case of error in the probe path. There were multiple issues noticed due to this missing error handling. One of them is random crashes if the regulators are not ready yet by the time probe is invoked. Ivan's previous attempt [1] to fix this issue, did not really address all the failure cases like regualtor/get_irq failures. [1] https://lkml.org/lkml/2015/9/7/62 Without this patch the kernel would carsh with log: ... Unable to handle kernel paging request at virtual address 17d78410 pgd = ffffffc001a5c000 [17d78410] *pgd=00000000b6806003, *pud=00000000b6806003, *pmd=0000000000000000 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 6 Comm: kworker/u8:0 Not tainted 4.4.0+ #48 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) Workqueue: deferwq deferred_probe_work_func task: ffffffc03686e900 ti: ffffffc0368b0000 task.ti: ffffffc0368b0000 PC is at raw_notifier_chain_register+0x1c/0x44 LR is at extcon_register_notifier+0x88/0xc8 pc : [<ffffffc0000da43c>] lr : [<ffffffc000606298>] pstate: 80000085 sp : ffffffc0368b3a70 x29: ffffffc0368b3a70 x28: ffffffc03680c310 x27: ffffffc035518000 x26: ffffffc035518000 x25: ffffffc03bfa20e0 x24: ffffffc035580a18 x23: 0000000000000000 x22: ffffffc035518458 x21: ffffffc0355e9a60 x20: ffffffc035518000 x19: 0000000000000000 x18: 0000000000000028 x17: 0000000000000003 x16: ffffffc0018153c8 x15: 0000000000000001 x14: ffffffc03686f0f8 x13: ffffffc03686f0f8 x12: 0000000000000003 x11: 0000000000000001 x10: 0000000000000001 x9 : ffffffc03686f0f8 x8 : 0000e3872014c1a1 x7 : 0000000000000028 x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000000 x3 : 00000000354fb170 x2 : 0000000017d78400 x1 : ffffffc0355e9a60 x0 : ffffffc0354fb268 Fixes: 591fc116f330 ("usb: phy: msm: Use extcon framework for VBUS and ID detection") CC: Stable <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2016-02-03ipmi: put acpi.h with the other headersTony Camuso1-2/+1
Enclosing '#include <linux/acpi.h>' within '#ifdef CONFIG_ACPI' is unnecessary, since it has its own conditional compile for CONFIG_ACPI. Commit 0fbcf4af7c83 ("ipmi: Convert the IPMI SI ACPI handling to a platform device") exposed this as a problem for platforms that do not support ACPI when it introduced a call to ACPI_PTR() macro outside of the CONFIG_ACPI conditional compile. This would have been perfectly acceptable if acpi.h were not conditionally excluded for the non-acpi platform, because the conditional compile within acpi.h defines ACPI_PTR() to return NULL when compiled for non acpi platforms. Signed-off-by: Tony Camuso <[email protected]> Fixed commit reference in header to conform to standard. Signed-off-by: Corey Minyard <[email protected]>
2016-02-03drivers/hwspinlock: fix race between radix tree insertion and lookupMatthew Wilcox1-0/+4
of_hwspin_lock_get_id() is protected by the RCU lock, which means that insertions can occur simultaneously with the lookup. If the radix tree transitions from a height of 0, we can see a slot with the indirect_ptr bit set, which will cause us to at least read random memory, and could cause other havoc. Fix this by using the newly introduced radix_tree_iter_retry(). Signed-off-by: Matthew Wilcox <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Ohad Ben-Cohen <[email protected]> Cc: Konstantin Khlebnikov <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2016-02-03drivers/scsi/sg.c: mark VMA as VM_IO to prevent migrationKirill A. Shutemov1-1/+1
Reduced testcase: #include <fcntl.h> #include <unistd.h> #include <sys/mman.h> #include <numaif.h> #define SIZE 0x2000 int main() { int fd; void *p; fd = open("/dev/sg0", O_RDWR); p = mmap(NULL, SIZE, PROT_EXEC, MAP_PRIVATE | MAP_LOCKED, fd, 0); mbind(p, SIZE, 0, NULL, 0, MPOL_MF_MOVE); return 0; } We shouldn't try to migrate pages in sg VMA as we don't have a way to update Sg_scatter_hold::pages accordingly from mm core. Let's mark the VMA as VM_IO to indicate to mm core that the VMA is not migratable. Signed-off-by: Kirill A. Shutemov <[email protected]> Reported-by: Dmitry Vyukov <[email protected]> Acked-by: Vlastimil Babka <[email protected]> Cc: Doug Gilbert <[email protected]> Cc: David Rientjes <[email protected]> Cc: Naoya Horiguchi <[email protected]> Cc: "Kirill A. Shutemov" <[email protected]> Cc: Shiraz Hashim <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Sasha Levin <[email protected]> Cc: syzkaller <[email protected]> Cc: Kostya Serebryany <[email protected]> Cc: Alexander Potapenko <[email protected]> Cc: James Bottomley <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2016-02-03staging/rdma: remove deprecated ipath driverDoug Ledford40-30434/+0
This driver was moved to staging for eventual deletion. Time to complete that task. Signed-off-by: Doug Ledford <[email protected]>
2016-02-03staging/rdma: remove deprecated ehca driverDoug Ledford34-13575/+0
This driver was moved to staging for eventual deletion. Time to complete that task. Signed-off-by: Doug Ledford <[email protected]>
2016-02-03staging/rdma: remove deprecated amso1100 driverDoug Ledford26-9057/+0
Driver was placed in staging for eventual removal, it is time to complete that task. Signed-off-by: Doug Ledford <[email protected]>
2016-02-02drm/amdgpu: remove exp hardware support from icelandAlex Deucher1-5/+5
It's working now. bug: https://bugs.freedesktop.org/show_bug.cgi?id=92270 Reviewed-by: Ken Wang <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
Powered by cgit, Gruvboxed by Blaster4385.