aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-12-03mtd: rawnand: Fix nand_erase_op delayHerve Codina1-1/+1
NAND_OP_CMD() expects a delay parameter in nanoseconds. The delay value is wrongly given in milliseconds. Fix the conversion macro used in order to set this delay in nanoseconds. Fixes: d7a773e8812b ("mtd: rawnand: Access SDR and NV-DDR timings through a common macro") Signed-off-by: Herve Codina <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected]
2021-12-03mtd: rawnand: denali: Add the dependency on HAS_IOMEMCai Huoqing1-1/+1
The helper function devm_platform_ioremap_resource_xxx() needs HAS_IOMEM enabled, so add the dependency on HAS_IOMEM. Fixes: 5f14a8ca1b49 ("mtd: rawnand: denali: Make use of the helper function devm_platform_ioremap_resource_byname()") Signed-off-by: Cai Huoqing <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected]
2021-12-03misc: rtsx: Avoid mangling IRQ during runtime PMKai-Heng Feng1-4/+0
After commit 5b4258f6721f ("misc: rtsx: rts5249 support runtime PM"), when the rtsx controller is runtime suspended, bring CPUs offline and back online, the runtime resume of the controller will fail: [ 47.319391] smpboot: CPU 1 is now offline [ 47.414140] x86: Booting SMP configuration: [ 47.414147] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 47.571334] smpboot: CPU 2 is now offline [ 47.686055] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 47.808174] smpboot: CPU 3 is now offline [ 47.878146] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 48.003679] smpboot: CPU 4 is now offline [ 48.086187] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 48.239627] smpboot: CPU 5 is now offline [ 48.326059] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 48.472193] smpboot: CPU 6 is now offline [ 48.574181] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 48.743375] smpboot: CPU 7 is now offline [ 48.838047] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 48.965447] __common_interrupt: 1.35 No irq handler for vector [ 51.174065] mmc0: error -110 doing runtime resume [ 54.978088] I/O error, dev mmcblk0, sector 21479 op 0x1:(WRITE) flags 0x0 phys_seg 11 prio class 0 [ 54.978108] Buffer I/O error on dev mmcblk0p1, logical block 19431, lost async page write [ 54.978129] Buffer I/O error on dev mmcblk0p1, logical block 19432, lost async page write [ 54.978134] Buffer I/O error on dev mmcblk0p1, logical block 19433, lost async page write [ 54.978137] Buffer I/O error on dev mmcblk0p1, logical block 19434, lost async page write [ 54.978141] Buffer I/O error on dev mmcblk0p1, logical block 19435, lost async page write [ 54.978145] Buffer I/O error on dev mmcblk0p1, logical block 19436, lost async page write [ 54.978148] Buffer I/O error on dev mmcblk0p1, logical block 19437, lost async page write [ 54.978152] Buffer I/O error on dev mmcblk0p1, logical block 19438, lost async page write [ 54.978155] Buffer I/O error on dev mmcblk0p1, logical block 19439, lost async page write [ 54.978160] Buffer I/O error on dev mmcblk0p1, logical block 19440, lost async page write [ 54.978244] mmc0: card aaaa removed [ 54.978452] FAT-fs (mmcblk0p1): FAT read failed (blocknr 4257) There's interrupt immediately raised on rtsx_pci_write_register() in runtime resume routine, but the IRQ handler hasn't registered yet. So we can either move rtsx_pci_write_register() after rtsx_pci_acquire_irq(), or just stop mangling IRQ on runtime PM. Choose the latter to save some CPU cycles. Fixes: 5b4258f6721f ("misc: rtsx: rts5249 support runtime PM") Cc: stable <[email protected]> Signed-off-by: Kai-Heng Feng <[email protected]> BugLink: https://bugs.launchpad.net/bugs/1951784 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-03nvmem: eeprom: at25: fix FRAM byte_lenRalph Siemsen1-20/+18
Commit fd307a4ad332 ("nvmem: prepare basics for FRAM support") added support for FRAM devices such as the Cypress FM25V. During testing, it was found that the FRAM detects properly, however reads and writes fail. Upon further investigation, two problem were found in at25_probe() routine. 1) In the case of an FRAM device without platform data, eg. fram == true && spi->dev.platform_data == NULL the stack local variable "struct spi_eeprom chip" is not initialized fully, prior to being copied into at25->chip. The chip.flags field in particular can cause problems. 2) The byte_len of FRAM is computed from its ID register, and is stored into the stack local "struct spi_eeprom chip" structure. This happens after the same structure has been copied into at25->chip. As a result, at25->chip.byte_len does not contain the correct length of the device. In turn this can cause checks at beginning of at25_ee_read() to fail (or equally, it could allow reads beyond the end of the device length). Fix both of these issues by eliminating the on-stack struct spi_eeprom. Instead use the one inside at25_data structure, which starts of zeroed. Fixes: fd307a4ad332 ("nvmem: prepare basics for FRAM support") Cc: stable <[email protected]> Reviewed-by: Arnd Bergmann <[email protected]> Signed-off-by: Ralph Siemsen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-03misc: fastrpc: fix improper packet size calculationJeya R1-4/+6
The buffer list is sorted and this is not being considered while calculating packet size. This would lead to improper copy length calculation for non-dmaheap buffers which would eventually cause sending improper buffers to DSP. Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method") Reviewed-by: Srinivas Kandagatla <[email protected]> Signed-off-by: Jeya R <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-03serial: 8250_bcm7271: UART errors after resuming from S2Al Cooper1-0/+13
There is a small window in time during resume where the hardware flow control signal RTS can be asserted (which allows a sender to resume sending data to the UART) but the baud rate has not yet been restored. This will cause corrupted data and FRAMING, OVERRUN and BREAK errors. This is happening because the MCTRL register is shadowed in uart_port struct and is later used during resume to set the MCTRL register during both serial8250_do_startup() and uart_resume_port(). Unfortunately, serial8250_do_startup() happens before the UART baud rate is restored. The fix is to clear the shadowed mctrl value at the end of suspend and restore it at the end of resume. Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver") Acked-by: Florian Fainelli <[email protected]> Signed-off-by: Al Cooper <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-03drm/ttm: fix ttm_bo_swapoutChristian König1-1/+2
Commit 7120a447c7fe ("drm/ttm: Double check mem_type of BO while eviction") made ttm_bo_evict_swapout_allowable() function actually check the placement, but we always used a dummy placement in ttm_bo_swapout. Fix this by using the real placement instead. Signed-off-by: Christian König <[email protected]> Fixes: 7120a447c7fe ("drm/ttm: Double check mem_type of BO while eviction") Reviewed-by: Pan, Xinhui <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-12-03usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init()Zhou Qingyang1-0/+3
In cdnsp_endpoint_init(), cdnsp_ring_alloc() is assigned to pep->ring and there is a dereference of it in cdnsp_endpoint_init(), which could lead to a NULL pointer dereference on failure of cdnsp_ring_alloc(). Fix this bug by adding a check of pep->ring. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_USB_CDNSP_GADGET=y show no new warnings, and our static analyzer no longer warns about this code. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Cc: stable <[email protected]> Acked-by: Pawel Laszczak <[email protected]> Acked-by: Peter Chen <[email protected]> Signed-off-by: Zhou Qingyang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-03usb: cdns3: gadget: fix new urb never complete if ep cancel previous requestsFrank Li1-16/+4
This issue was found at android12 MTP. 1. MTP submit many out urb request. 2. Cancel left requests (>20) when enough data get from host 3. Send ACK by IN endpoint. 4. MTP submit new out urb request. 5. 4's urb never complete. TRACE LOG: MtpServer-2157 [000] d..3 1287.150391: cdns3_ep_dequeue: ep1out: req: 00000000299e6836, req buff 000000009df42287, length: 0/16384 zsi, status: -115, trb: [start:87, end:87: virt addr 0x80004000ffd50420], flags:1 SID: 0 MtpServer-2157 [000] d..3 1287.150410: cdns3_gadget_giveback: ep1out: req: 00000000299e6836, req buff 000000009df42287, length: 0/16384 zsi, status: -104, trb: [start:87, end:87: virt addr 0x80004000ffd50420], flags:0 SID: 0 MtpServer-2157 [000] d..3 1287.150433: cdns3_ep_dequeue: ep1out: req: 0000000080b7bde6, req buff 000000009ed5c556, length: 0/16384 zsi, status: -115, trb: [start:88, end:88: virt addr 0x80004000ffd5042c], flags:1 SID: 0 MtpServer-2157 [000] d..3 1287.150446: cdns3_gadget_giveback: ep1out: req: 0000000080b7bde6, req buff 000000009ed5c556, length: 0/16384 zsi, status: -104, trb: [start:88, end:88: virt addr 0x80004000ffd5042c], flags:0 SID: 0 .... MtpServer-2157 [000] d..1 1293.630410: cdns3_alloc_request: ep1out: req: 00000000afbccb7d, req buff 0000000000000000, length: 0/0 zsi, status: 0, trb: [start:0, end:0: virt addr (null)], flags:0 SID: 0 MtpServer-2157 [000] d..2 1293.630421: cdns3_ep_queue: ep1out: req: 00000000afbccb7d, req buff 00000000871caf90, length: 0/512 zsi, status: -115, trb: [start:0, end:0: virt addr (null)], flags:0 SID: 0 MtpServer-2157 [000] d..2 1293.630445: cdns3_wa1: WA1: ep1out set guard MtpServer-2157 [000] d..2 1293.630450: cdns3_wa1: WA1: ep1out restore cycle bit MtpServer-2157 [000] d..2 1293.630453: cdns3_prepare_trb: ep1out: trb 000000007317b3ee, dma buf: 0xffd5bc00, size: 512, burst: 128 ctrl: 0x00000424 (C=0, T=0, ISP, IOC, Normal) SID:0 LAST_SID:0 MtpServer-2157 [000] d..2 1293.630460: cdns3_doorbell_epx: ep1out, ep_trbaddr ffd50414 .... irq/241-5b13000-2154 [000] d..1 1293.680849: cdns3_epx_irq: IRQ for ep1out: 01000408 ISP , ep_traddr: ffd508ac ep_last_sid: 00000000 use_streams: 0 irq/241-5b13000-2154 [000] d..1 1293.680858: cdns3_complete_trb: ep1out: trb 0000000021a11b54, dma buf: 0xffd50420, size: 16384, burst: 128 ctrl: 0x00001810 (C=0, T=0, CHAIN, LINK) SID:0 LAST_SID:0 irq/241-5b13000-2154 [000] d..1 1293.680865: cdns3_request_handled: Req: 00000000afbccb7d not handled, DMA pos: 185, ep deq: 88, ep enq: 185, start trb: 184, end trb: 184 Actually DMA pos already bigger than previous submit request afbccb7d's TRB (184-184). The reason of (not handled) is that deq position is wrong. The TRB link is below when irq happen. DEQ LINK LINK LINK LINK LINK .... TRB(afbccb7d):START DMA(EP_TRADDR). Original code check LINK TRB, but DEQ just move one step. LINK DEQ LINK LINK LINK LINK .... TRB(afbccb7d):START DMA(EP_TRADDR). This patch skip all LINK TRB and sync DEQ to trb's start. LINK LINK LINK LINK LINK .... DEQ = TRB(afbccb7d):START DMA(EP_TRADDR). Acked-by: Peter Chen <[email protected]> Cc: stable <[email protected]> Signed-off-by: Frank Li <[email protected]> Signed-off-by: Jun Li <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-03usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnectBadhri Jagan Sridharan1-4/+0
Stub from the spec: "4.5.2.2.4.2 Exiting from AttachWait.SNK State A Sink shall transition to Unattached.SNK when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce. A DRP shall transition to Unattached.SRC when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce." This change makes TCPM to wait in SNK_DEBOUNCED state until CC1 and CC2 pins is SNK.Open for at least tPDDebounce. Previously, TCPM resets the port if vbus is not present in PD_T_PS_SOURCE_ON. This causes TCPM to loop continuously when connected to a faulty power source that does not present vbus. Waiting in SNK_DEBOUNCED also ensures that TCPM is adherant to "4.5.2.2.4.2 Exiting from AttachWait.SNK State" requirements. [ 6169.280751] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected] [ 6169.280759] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS] [ 6169.280771] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS] [ 6169.282427] CC1: 0 -> 0, CC2: 5 -> 5 [state SNK_ATTACH_WAIT, polarity 0, connected] [ 6169.450825] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 6169.450834] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS] [ 6169.930892] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms] [ 6169.931296] disable vbus discharge ret:0 [ 6169.931301] Setting usb_comm capable false [ 6169.932783] Setting voltage/current limit 0 mV 0 mA [ 6169.932802] polarity 0 [ 6169.933706] Requesting mux state 0, usb-role 0, orientation 0 [ 6169.936689] cc:=0 [ 6169.936812] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS] [ 6169.937157] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected] [ 6170.036880] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms] [ 6170.036890] state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [rev2 NONE_AMS] [ 6170.036896] Start toggling [ 6170.041412] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected] [ 6170.042973] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected] [ 6170.042976] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS] [ 6170.042981] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS] [ 6170.213014] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 6170.213019] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS] [ 6170.693068] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms] [ 6170.693304] disable vbus discharge ret:0 [ 6170.693308] Setting usb_comm capable false [ 6170.695193] Setting voltage/current limit 0 mV 0 mA [ 6170.695210] polarity 0 [ 6170.695990] Requesting mux state 0, usb-role 0, orientation 0 [ 6170.701896] cc:=0 [ 6170.702181] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS] [ 6170.703343] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected] Fixes: f0690a25a140b8 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: [email protected] Acked-by: Heikki Krogerus <[email protected]> Signed-off-by: Badhri Jagan Sridharan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-03USB: NO_LPM quirk Lenovo Powered USB-C Travel HubOle Ernst1-0/+3
This is another branded 8153 device that doesn't work well with LPM: r8152 2-2.1:1.0 enp0s13f0u2u1: Stop submitting intr, status -71 Disable LPM to resolve the issue. Signed-off-by: Ole Ernst <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-03xhci: Fix commad ring abort, write all 64 bits to CRCR register.Mathias Nyman1-7/+14
Turns out some xHC controllers require all 64 bits in the CRCR register to be written to execute a command abort. The lower 32 bits containing the command abort bit is written first. In case the command ring stops before we write the upper 32 bits then hardware may use these upper bits to set the commnd ring dequeue pointer. Solve this by making sure the upper 32 bits contain a valid command ring dequeue pointer. The original patch that only wrote the first 32 to stop the ring went to stable, so this fix should go there as well. Fixes: ff0e50d3564f ("xhci: Fix command ring pointer corruption while aborting a command") Cc: [email protected] Tested-by: Pavankumar Kondeti <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-03bus: mhi: pci_generic: Fix device recovery failed issueSlark Xiao1-1/+1
For Foxconn T99W175 device(sdx55 platform) in some host platform, it would be unavailable once the host execute the err handler. After checking, it's caused by the delay time too short to get a successful reset. Please see my test evidence as bewlow(BTW, I add some extra test logs in function mhi_pci_reset_prepare and mhi_pci_reset_done): When MHI_POST_RESET_DELAY_MS equals to 500ms: Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222477] mhi mhi0: Device MHI is not in valid state Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222628] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare reset Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222631] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare mhi_soc_reset Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222632] mhi mhi0: mhi_soc_reset write soc to reset Nov 4 14:30:05 jbd-ThinkEdge kernel: [ 147.839993] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_done Nov 4 14:30:05 jbd-ThinkEdge kernel: [ 147.902063] mhi-pci-generic 0000:2d:00.0: reset failed When MHI_POST_RESET_DELAY_MS equals to 1000ms or 1500ms: Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.067857] mhi mhi0: Device MHI is not in valid state Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.068029] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare reset Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.068032] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare mhi_soc_reset Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.068034] mhi mhi0: mhi_soc_reset write soc to reset Nov 4 19:07:29 jbd-ThinkEdge kernel: [ 159.607006] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_done Nov 4 19:07:29 jbd-ThinkEdge kernel: [ 159.607152] mhi mhi0: Requested to power ON Nov 4 19:07:51 jbd-ThinkEdge kernel: [ 181.302872] mhi mhi0: Failed to reset MHI due to syserr state Nov 4 19:07:51 jbd-ThinkEdge kernel: [ 181.303011] mhi-pci-generic 0000:2d:00.0: failed to power up MHI controller When MHI_POST_RESET_DELAY_MS equals to 2000ms: Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180527] mhi mhi0: Failed to transition from PM state: Linkdown or Error Fatal Detect to: SYS ERROR Process Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180535] mhi mhi0: Device MHI is not in valid state Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180722] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare reset Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180725] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare mhi_soc_reset Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180727] mhi mhi0: mhi_soc_reset write soc to reset Nov 4 17:51:11 jbd-ThinkEdge kernel: [ 150.230787] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_done Nov 4 17:51:11 jbd-ThinkEdge kernel: [ 150.230928] mhi mhi0: Requested to power ON Nov 4 17:51:11 jbd-ThinkEdge kernel: [ 150.231173] mhi mhi0: Power on setup success Nov 4 17:51:14 jbd-ThinkEdge kernel: [ 153.254747] mhi mhi0: Wait for device to enter SBL or Mission mode I also tried big data like 3000, and it worked as well. 500ms may not be enough for all support mhi device. We shall increase it to 2000ms at least. Link: https://lore.kernel.org/r/[email protected] [mani: massaged commit message little bit, added Fixes tag and CCed stable] Fixes: 8ccc3279fcad ("mhi: pci_generic: Add support for reset") Cc: [email protected] Reviewed-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Slark Xiao <[email protected]> Signed-off-by: Manivannan Sadhasivam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-03Merge tag 'phy-fixes-5.16' of ↵Greg Kroah-Hartman10-24/+29
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy: fixes for 5.16 Fixes for: - kernel-doc warnings for various drivers - error handling fix for HiSilicon driver - name fix for zynqmp phy - property name fix in stm32 phy * tag 'phy-fixes-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: HiSilicon: Fix copy and paste bug in error handling dt-bindings: phy: zynqmp-psgtr: fix USB phy name phy: ti: omap-usb2: Fix the kernel-doc style phy: qualcomm: ipq806x-usb: Fix kernel-doc style phy: ti: tusb1210: Fix the kernel-doc warn phy: qualcomm: usb-hsic: Fix the kernel-doc warn phy: qualcomm: qmp: Add missing struct documentation phy: mvebu-cp110-utmi: Fix kernel-doc warns phy: ti: report 2 non-kernel-doc comments phy: stm32: fix st,slow-hs-slew-rate with st,decrease-hs-slew-rate
2021-12-03HID: intel-ish-hid: ipc: only enable IRQ wakeup when requestedThomas Weißschuh1-2/+4
Fixes spurious wakeups from s0ix on Lenovo ThinkPad X1 Cargon Gen 9 on lid close. These wakeups are generated by interrupts from the ISH on changes to the lid status. By disabling the wake IRQ from the ISH we inhibit these spurious wakeups while keeping the resume from LID open through the ACPI interrupt. Reports on the Lenovo forums indicate that Lenovo ThinkPad X1 Yoga Gen6 is also affected. Fixes: ae02e5d40d5f ("HID: intel-ish-hid: ipc layer") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214855 Signed-off-by: Thomas Weißschuh <[email protected]> Acked-by: Srinivas Pandruvada <[email protected]> Signed-off-by: Benjamin Tissoires <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-12-03HID: google: add eel USB idxiazhengqiao2-0/+3
Add one additional hammer-like device. Signed-off-by: xiazhengqiao <[email protected]> Signed-off-by: Benjamin Tissoires <[email protected]> Link: https://lore.kernel.org/r/20211203030119.28612-1-xiazhengqiao@huaqin.corp-partner.google.com
2021-12-03HID: add USB_HID dependancy to hid-prodikeysGreg Kroah-Hartman1-1/+1
The prodikeys HID driver only controls USB devices, yet did not have a dependancy on USB_HID. This causes build errors on some configurations like nios2 when building due to new changes to the prodikeys driver. Reported-by: kernel test robot <[email protected]> Cc: [email protected] Cc: Jiri Kosina <[email protected]> Cc: Benjamin Tissoires <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Benjamin Tissoires <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-12-03HID: add USB_HID dependancy to hid-chiconyGreg Kroah-Hartman1-1/+1
The chicony HID driver only controls USB devices, yet did not have a dependancy on USB_HID. This causes build errors on some configurations like sparc when building due to new changes to the chicony driver. Reported-by: Stephen Rothwell <[email protected]> Cc: [email protected] Cc: Jiri Kosina <[email protected]> Cc: Benjamin Tissoires <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Benjamin Tissoires <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-12-02scsi: pm80xx: Do not call scsi_remove_host() in pm8001_alloc()Igor Pylypiv1-4/+2
Calling scsi_remove_host() before scsi_add_host() results in a crash: BUG: kernel NULL pointer dereference, address: 0000000000000108 RIP: 0010:device_del+0x63/0x440 Call Trace: device_unregister+0x17/0x60 scsi_remove_host+0xee/0x2a0 pm8001_pci_probe+0x6ef/0x1b90 [pm80xx] local_pci_probe+0x3f/0x90 We cannot call scsi_remove_host() in pm8001_alloc() because scsi_add_host() has not been called yet at that point in time. Function call tree: pm8001_pci_probe() | `- pm8001_pci_alloc() | | | `- pm8001_alloc() | | | `- scsi_remove_host() | `- scsi_add_host() Link: https://lore.kernel.org/r/[email protected] Fixes: 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues") Reviewed-by: Vishakha Channapattan <[email protected]> Acked-by: Jack Wang <[email protected]> Signed-off-by: Igor Pylypiv <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2021-12-02clk: imx: use module_platform_driverMiles Chen2-2/+2
Replace builtin_platform_driver_probe with module_platform_driver_probe because CONFIG_CLK_IMX8QXP can be set to =m (kernel module). Fixes: e0d0d4d86c766 ("clk: imx8qxp: Support building i.MX8QXP clock driver as module") Cc: Fabio Estevam <[email protected]> Cc: Stephen Boyd <[email protected]> Signed-off-by: Miles Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Fabio Estevam <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2021-12-02clk: qcom: clk-alpha-pll: Don't reconfigure running TrionBjorn Andersson1-0/+9
In the event that the bootloader has configured the Trion PLL as source for the display clocks, e.g. for the continuous splashscreen, then there will also be RCGs that are clocked by this instance. Reconfiguring, and in particular disabling the output of, the PLL will cause issues for these downstream RCGs and has been shown to prevent them from being re-parented. Follow downstream and skip configuration if it's determined that the PLL is already running. Fixes: 59128c20a6a9 ("clk: qcom: clk-alpha-pll: Add support for controlling Lucid PLLs") Signed-off-by: Bjorn Andersson <[email protected]> Reviewed-by: Robert Foss <[email protected]> Reviewed-by: Vinod Koul <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]>
2021-12-02clk: qcom: regmap-mux: fix parent clock lookupDmitry Baryshkov3-1/+15
The function mux_get_parent() uses qcom_find_src_index() to find the parent clock index, which is incorrect: qcom_find_src_index() uses src enum for the lookup, while mux_get_parent() should use cfg field (which corresponds to the register value). Add qcom_find_cfg_index() function doing this kind of lookup and use it for mux parent lookup. Fixes: df964016490b ("clk: qcom: add parent map for regmap mux") Cc: [email protected] Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]>
2021-12-02Merge tag 'drm-fixes-2021-12-03-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds38-159/+237
Pull drm fixes from Dave Airlie: "Bit of an uptick in patch count this week, though it's all relatively small overall. I suspect msm has been queuing up a few fixes to skew it here. Otherwise amdgpu has a scattered bunch of small fixes, and then some vc4, i915. virtio-gpu changes an rc1 introduced uAPI mistake, and makes it operate more like other drivers. This should be fine as no userspace relies on the behaviour yet. Summary: dma-buf: - memory leak fix msm: - kasan found memory overwrite - mmap flags - fencing error bug - ioctl NULL ptr - uninit var - devfreqless devices fix - dsi lanes fix - dp: avoid unpowered aux xfers amdgpu: - IP discovery based enumeration fixes - vkms fixes - DSC fixes for DP MST - Audio fix for hotplug with tiled displays - Misc display fixes - DP tunneling fix - DP fix - Aldebaran fix amdkfd: - Locking fix - Static checker fix - Fix double free i915: - backlight regression - Intel HDR backlight detection fix - revert TGL workaround that caused hangs virtio-gpu: - switch back to drm_poll vc4: - memory leak - error check fix - HVS modesetting fixes" * tag 'drm-fixes-2021-12-03-1' of git://anongit.freedesktop.org/drm/drm: (41 commits) Revert "drm/i915: Implement Wa_1508744258" drm/amdkfd: process_info lock not needed for svm drm/amdgpu: adjust the kfd reset sequence in reset sriov function drm/amd/display: add connector type check for CRC source set drm/amdkfd: fix double free mem structure drm/amdkfd: set "r = 0" explicitly before goto drm/amd/display: Add work around for tunneled MST. drm/amd/display: Fix for the no Audio bug with Tiled Displays drm/amd/display: Clear DPCD lane settings after repeater training drm/amd/display: Allow DSC on supported MST branch devices drm/amdgpu: Don't halt RLC on GFX suspend drm/amdgpu: fix the missed handling for SDMA2 and SDMA3 drm/amdgpu: check atomic flag to differeniate with legacy path drm/amdgpu: cancel the correct hrtimer on exit drm/amdgpu/sriov/vcn: add new vcn ip revision check case for SIENNA_CICHLID drm/i915/dp: Perform 30ms delay after source OUI write dma-buf: system_heap: Use 'for_each_sgtable_sg' in pages free flow drm/i915: Add support for panels with VESA backlights with PWM enable/disable drm/vc4: kms: Fix previous HVS commit wait drm/vc4: kms: Don't duplicate pending commit ...
2021-12-03Merge tag 'drm-intel-fixes-2021-12-02' of ↵Dave Airlie5-13/+42
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fixing a regression where the backlight brightness control stopped working. - Fix the Intel HDR backlight support detection. - Reverting a w/a to fix a gpu Hang in TGL. The w/a itself was also for a hang, but in a much rarer scenario. The proper solution need to be done with help from user space and it will be addressed later. Signed-off-by: Dave Airlie <[email protected]> From: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-12-03Merge tag 'drm-misc-fixes-2021-12-02' of ↵Dave Airlie5-66/+21
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Switch back to drm_poll for virtio, multiple fixes (memory leak, improper error check, some functional fixes too) for vc4, memory leak fix in dma-buf, Signed-off-by: Dave Airlie <[email protected]> From: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20211202084440.u3b7lbeulj7k3ltg@houat
2021-12-02Merge tag 'net-5.16-rc4' of ↵Linus Torvalds69-298/+757
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wireless, and wireguard. Mostly scattered driver changes this week, with one big clump in mv88e6xxx. Nothing of note, really. Current release - regressions: - smc: keep smc_close_final()'s error code during active close Current release - new code bugs: - iwlwifi: various static checker fixes (int overflow, leaks, missing error codes) - rtw89: fix size of firmware header before transfer, avoid crash - mt76: fix timestamp check in tx_status; fix pktid leak; - mscc: ocelot: fix missing unlock on error in ocelot_hwstamp_set() Previous releases - regressions: - smc: fix list corruption in smc_lgr_cleanup_early - ipv4: convert fib_num_tclassid_users to atomic_t Previous releases - always broken: - tls: fix authentication failure in CCM mode - vrf: reset IPCB/IP6CB when processing outbound pkts, prevent incorrect processing - dsa: mv88e6xxx: fixes for various device errata - rds: correct socket tunable error in rds_tcp_tune() - ipv6: fix memory leak in fib6_rule_suppress - wireguard: reset peer src endpoint when netns exits - wireguard: improve resilience to DoS around incoming handshakes - tcp: fix page frag corruption on page fault which involves TCP - mpls: fix missing attributes in delete notifications - mt7915: fix NULL pointer dereference with ad-hoc mode Misc: - rt2x00: be more lenient about EPROTO errors during start - mlx4_en: update reported link modes for 1/10G" * tag 'net-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits) net: dsa: b53: Add SPI ID table gro: Fix inconsistent indenting selftests: net: Correct case name net/rds: correct socket tunable error in rds_tcp_tune() mctp: Don't let RTM_DELROUTE delete local routes net/smc: Keep smc_close_final rc during active close ibmvnic: drop bad optimization in reuse_tx_pools() ibmvnic: drop bad optimization in reuse_rx_pools() net/smc: fix wrong list_del in smc_lgr_cleanup_early Fix Comment of ETH_P_802_3_MIN ethernet: aquantia: Try MAC address from device tree ipv4: convert fib_num_tclassid_users to atomic_t net: avoid uninit-value from tcp_conn_request net: annotate data-races on txq->xmit_lock_owner octeontx2-af: Fix a memleak bug in rvu_mbox_init() net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources() vrf: Reset IPCB/IP6CB when processing outbound pkts in vrf dev xmit net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings() net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed net: dsa: mv88e6xxx: Fix inband AN for 2500base-x on 88E6393X family ...
2021-12-02Merge tag 'for-linus-5.16-2' of git://github.com/cminyard/linux-ipmiLinus Torvalds1-8/+33
Pull IPMI fixes from Corey Minyard: "Some changes that went in 5.16 had issues. When working on the design a piece was redesigned and things got missed. And the message type was not being initialized when it was allocated, resulting in crashes. In addition, the IPMI driver has had a shutdown issue where it could still have an item in a system workqueue after it had been shutdown. Move to a private workqueue to avoid that problem" * tag 'for-linus-5.16-2' of git://github.com/cminyard/linux-ipmi: ipmi:ipmb: Fix unknown command response ipmi: fix IPMI_SMI_MSG_TYPE_IPMB_DIRECT response length checking ipmi: fix oob access due to uninit smi_msg type ipmi: msghandler: Make symbol 'remove_work_wq' static ipmi: Move remove_work to dedicated workqueue
2021-12-02Revert "drm/i915: Implement Wa_1508744258"José Roberto de Souza1-7/+0
This workarounds are causing hangs, because I missed the fact that it needs to be enabled for all cases and disabled when doing a resolve pass. So KMD only needs to whitelist it and UMD will be the one setting it on per case. This reverts commit 28ec02c9cbebf3feeaf21a59df9dfbc02bda3362. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4145 Signed-off-by: José Roberto de Souza <[email protected]> Fixes: 28ec02c9cbeb ("drm/i915: Implement Wa_1508744258") Reviewed-by: Matt Atwood <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit f3799ff16fcfacd44aee55db162830df461b631f) Signed-off-by: Rodrigo Vivi <[email protected]>
2021-12-02HID: bigbenff: prevent null pointer dereferenceBenjamin Tissoires1-1/+1
When emulating the device through uhid, there is a chance we don't have output reports and so report_field is null. Cc: [email protected] Signed-off-by: Benjamin Tissoires <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-12-02HID: sony: fix error path in probeBenjamin Tissoires1-7/+15
When the setup of the GHL fails, we are not calling hid_hw_stop(). This leads to the hidraw node not being released, meaning a crash whenever somebody attempts to open the file. Cc: [email protected] Signed-off-by: Benjamin Tissoires <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-12-02HID: add USB_HID dependancy on some USB HID driversGreg Kroah-Hartman1-3/+3
Some HID drivers are only for USB drivers, yet did not depend on CONFIG_USB_HID. This was hidden by the fact that the USB functions were stubbed out in the past, but now that drivers are checking for USB devices properly, build errors can occur with some random configurations. Reported-by: kernel test robot <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Benjamin Tissoires <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-12-02HID: check for valid USB device for many HID driversGreg Kroah-Hartman23-9/+92
Many HID drivers assume that the HID device assigned to them is a USB device as that was the only way HID devices used to be able to be created in Linux. However, with the additional ways that HID devices can be created for many different bus types, that is no longer true, so properly check that we have a USB device associated with the HID device before allowing a driver that makes this assumption to claim it. Cc: Jiri Kosina <[email protected]> Cc: Benjamin Tissoires <[email protected]> Cc: Michael Zaidman <[email protected]> Cc: Stefan Achatz <[email protected]> Cc: Maxime Coquelin <[email protected]> Cc: Alexandre Torgue <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Tested-by: Benjamin Tissoires <[email protected]> [bentiss: amended for thrustmater.c hunk to apply] Signed-off-by: Benjamin Tissoires <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-12-02HID: wacom: fix problems when device is not a valid USB deviceGreg Kroah-Hartman1-5/+12
The wacom driver accepts devices of more than just USB types, but some code paths can cause problems if the device being controlled is not a USB device due to a lack of checking. Add the needed checks to ensure that the USB device accesses are only happening on a "real" USB device, and not one on some other bus. Cc: Jiri Kosina <[email protected]> Cc: Benjamin Tissoires <[email protected]> Cc: [email protected] Cc: [email protected] Tested-by: Benjamin Tissoires <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Benjamin Tissoires <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-12-02HID: add hid_is_usb() function to make it simpler for USB detectionGreg Kroah-Hartman5-9/+6
A number of HID drivers already call hid_is_using_ll_driver() but only for the detection of if this is a USB device or not. Make this more obvious by creating hid_is_usb() and calling the function that way. Also converts the existing hid_is_using_ll_driver() functions to use the new call. Cc: Jiri Kosina <[email protected]> Cc: Benjamin Tissoires <[email protected]> Cc: [email protected] Cc: [email protected] Tested-by: Benjamin Tissoires <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Benjamin Tissoires <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-12-02net: dsa: b53: Add SPI ID tableFlorian Fainelli1-0/+14
Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding an id_table listing the SPI IDs for everything. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-02ibmvnic: drop bad optimization in reuse_tx_pools()Sukadev Bhattiprolu1-11/+3
When trying to decide whether or not reuse existing rx/tx pools we tried to allow a range of values for the pool parameters rather than exact matches. This was intended to reuse the resources for instance when switching between two VIO servers with different default parameters. But this optimization is incomplete and breaks when we try to change the number of queues for instance. The optimization needs to be updated, so drop it for now and simplify the code. Fixes: bbd809305bc7 ("ibmvnic: Reuse tx pools when possible") Reported-by: Dany Madden <[email protected]> Signed-off-by: Sukadev Bhattiprolu <[email protected]> Reviewed-by: Dany Madden <[email protected]> Reviewed-by: Rick Lindsley <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-02ibmvnic: drop bad optimization in reuse_rx_pools()Sukadev Bhattiprolu1-11/+3
When trying to decide whether or not reuse existing rx/tx pools we tried to allow a range of values for the pool parameters rather than exact matches. This was intended to reuse the resources for instance when switching between two VIO servers with different default parameters. But this optimization is incomplete and breaks when we try to change the number of queues for instance. The optimization needs to be updated, so drop it for now and simplify the code. Fixes: 489de956e7a2 ("ibmvnic: Reuse rx pools when possible") Reported-by: Dany Madden <[email protected]> Signed-off-by: Sukadev Bhattiprolu <[email protected]> Reviewed-by: Dany Madden <[email protected]> Reviewed-by: Rick Lindsley <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-02ethernet: aquantia: Try MAC address from device treeTianhao Chai1-10/+14
Apple M1 Mac minis (2020) with 10GE NICs do not have MAC address in the card, but instead need to obtain MAC addresses from the device tree. In this case the hardware will report an invalid MAC. Currently atlantic driver does not query the DT for MAC address and will randomly assign a MAC if the NIC doesn't have a permanent MAC burnt in. This patch causes the driver to perfer a valid MAC address from OF (if present) over HW self-reported MAC and only fall back to a random MAC address when neither of them is valid. Signed-off-by: Tianhao Chai <[email protected]> Reviewed-by: Igor Russkikh <[email protected]> Reviewed-by: Hector Martin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-02irqchip: nvic: Fix offset for Interrupt Priority OffsetsVladimir Murzin1-1/+1
According to ARM(v7M) ARM Interrupt Priority Offsets located at 0xE000E400-0xE000E5EC, while 0xE000E300-0xE000E33C covers read-only Interrupt Active Bit Registers Fixes: 292ec080491d ("irqchip: Add support for ARMv7-M NVIC") Signed-off-by: Vladimir Murzin <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-12-02ata: replace snprintf in show functions with sysfs_emitYang Guang1-1/+1
coccinelle report： ./drivers/ata/libata-sata.c:830:8-16: WARNING: use scnprintf or sprintf Use sysfs_emit instead of scnprintf or sprintf makes more sense. Reported-by: Zeal Robot <[email protected]> Signed-off-by: Yang Guang <[email protected]> Signed-off-by: Damien Le Moal <[email protected]>
2021-12-01Revert "PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge"Marek Behún1-9/+0
This reverts commit 239edf686c14a9ff926dec2f350289ed7adfefe2. 239edf686c14 ("PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge") added support for the Type 1 Expansion ROM BAR at config offset 0x38, based on the register being listed in the Marvell Armada A3720 spec. But the spec doesn't document it at all for RC mode, and there is no ROM in the SOC, so remove this emulation for now. The PCI bridge which represents aardvark's PCIe Root Port has an Expansion ROM Base Address register at offset 0x30, but its meaning is different than PCI's Expansion ROM BAR register, although the layout is the same. (This is why we thought it does the same thing.) First: there is no ROM (or part of BootROM) in the A3720 SOC dedicated for PCIe Root Port (or controller in RC mode) containing executable code that would initialize the Root Port, suitable for execution in bootloader (this is how Expansion ROM BAR is used on x86). Second: in A3720 spec the register (address 0xD0070030) is not documented at all for Root Complex mode, but similar to other BAR registers, it has an "entangled partner" in register 0xD0075920, which does address translation for the BAR in 0xD0070030: - the BAR register sets the address from the view of PCIe bus - the translation register sets the address from the view of the CPU The other BAR registers also have this entangled partner, and they can be used to: - in RC mode: address-checking on the receive side of the RC (they can define address ranges for memory accesses from remote Endpoints to the RC) - in Endpoint mode: allow the remote CPU to access memory on A3720 The Expansion ROM BAR has only the Endpoint part documented, but from the similarities we think that it can also be used in RC mode in that way. So either Expansion ROM BAR has different meaning (if the hypothesis above is true), or we don't know it's meaning (since it is not documented for RC mode). Remove the register from the emulated bridge accessing functions. [bhelgaas: summarize reason for removal (first paragraph)] Fixes: 239edf686c14 ("PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Marek Behún <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Pali Rohár <[email protected]>
2021-12-01octeontx2-af: Fix a memleak bug in rvu_mbox_init()Zhou Qingyang1-1/+1
In rvu_mbox_init(), mbox_regions is not freed or passed out under the switch-default region, which could lead to a memory leak. Fix this bug by changing 'return err' to 'goto free_regions'. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_OCTEONTX2_AF=y show no new warnings, and our static analyzer no longer warns about this code. Fixes: 98c561116360 (“octeontx2-af: cn10k: Add mbox support for CN10K platform”) Signed-off-by: Zhou Qingyang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-01net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources()Zhou Qingyang1-2/+7
In mlx4_en_try_alloc_resources(), mlx4_en_copy_priv() is called and tmp->tx_cq will be freed on the error path of mlx4_en_copy_priv(). After that mlx4_en_alloc_resources() is called and there is a dereference of &tmp->tx_cq[t][i] in mlx4_en_alloc_resources(), which could lead to a use after free problem on failure of mlx4_en_copy_priv(). Fix this bug by adding a check of mlx4_en_copy_priv() This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_MLX4_EN=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: ec25bc04ed8e ("net/mlx4_en: Add resilience in low memory systems") Signed-off-by: Zhou Qingyang <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-01vrf: Reset IPCB/IP6CB when processing outbound pkts in vrf dev xmitStephen Suryaputra1-0/+2
IPCB/IP6CB need to be initialized when processing outbound v4 or v6 pkts in the codepath of vrf device xmit function so that leftover garbage doesn't cause futher code that uses the CB to incorrectly process the pkt. One occasion of the issue might occur when MPLS route uses the vrf device as the outgoing device such as when the route is added using "ip -f mpls route add <label> dev <vrf>" command. The problems seems to exist since day one. Hence I put the day one commits on the Fixes tags. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Fixes: 35402e313663 ("net: Add IPv6 support to VRF device") Cc: [email protected] Signed-off-by: Stephen Suryaputra <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-01net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings()Zhou Qingyang1-2/+8
In qlcnic_83xx_add_rings(), the indirect function of ahw->hw_ops->alloc_mbx_args will be called to allocate memory for cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(), which could lead to a NULL pointer dereference on failure of the indirect function like qlcnic_83xx_alloc_mbx_args(). Fix this bug by adding a check of alloc_mbx_args(), this patch imitates the logic of mbx_cmd()'s failure handling. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_QLCNIC=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: 7f9664525f9c ("qlcnic: 83xx memory map and HW access routine") Signed-off-by: Zhou Qingyang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-02Merge tag 'amd-drm-fixes-5.16-2021-12-01' of ↵Dave Airlie16-40/+90
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.16-2021-12-01: amdgpu: - IP discovery based enumeration fixes - vkms fixes - DSC fixes for DP MST - Audio fix for hotplug with tiled displays - Misc display fixes - DP tunneling fix - DP fix - Aldebaran fix amdkfd: - Locking fix - Static checker fix - Fix double free Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-12-02Merge tag 'drm-msm-fixes-2021-11-28' of ↵Dave Airlie12-40/+84
https://gitlab.freedesktop.org/drm/msm into drm-fixes msm misc fixes, build, display Signed-off-by: Dave Airlie <[email protected]> From: Rob Clark <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsV-ntO_u323XMKuD6bgbgvXporwi1sbyXwNDAuA52Afw@mail.gmail.com
2021-12-01drm/amdkfd: process_info lock not needed for svmPhilip Yang1-9/+0
process_info->lock is used to protect kfd_bo_list, vm_list_head, n_vms and userptr valid/inval list, svm_range_restore_work and svm_range_set_attr don't access those, so do not need to take process_info lock. This will avoid potential circular locking issue. Signed-off-by: Philip Yang <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-01drm/amdgpu: adjust the kfd reset sequence in reset sriov functionshaoyunl1-4/+8
This change revert previous commits: 9f4f2c1a3524 ("drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov") 271fd38ce56d ("drm/amdgpu: move kfd post_reset out of reset_sriov function") This change moves the amdgpu_amdkfd_pre_reset to an earlier place in amdgpu_device_reset_sriov, presumably to address the sequence issue that the first patch was originally meant to fix. Some register access(GRBM_GFX_CNTL) only be allowed on full access mode. Move kfd_pre_reset and kfd_post_reset back inside reset_sriov function. Fixes: 9f4f2c1a3524 ("drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov") Fixes: 271fd38ce56d ("drm/amdgpu: move kfd post_reset out of reset_sriov function") Signed-off-by: shaoyunl <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-01drm/amd/display: add connector type check for CRC source setPerry Yuan1-0/+8
[Why] IGT bypass test will set crc source as DPRX,and display DM didn`t check connection type, it run the test on the HDMI connector ,then the kernel will be crashed because aux->transfer is set null for HDMI connection. This patch will skip the invalid connection test and fix kernel crash issue. [How] Check the connector type while setting the pipe crc source as DPRX or auto,if the type is not DP or eDP, the crtc crc source will not be set and report error code to IGT test,IGT will show the this subtest as no valid crtc/connector combinations found. 116.779714] [IGT] amd_bypass: starting subtest 8bpc-bypass-mode [ 117.730996] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 117.731001] #PF: supervisor instruction fetch in kernel mode [ 117.731003] #PF: error_code(0x0010) - not-present page [ 117.731004] PGD 0 P4D 0 [ 117.731006] Oops: 0010 [#1] SMP NOPTI [ 117.731009] CPU: 11 PID: 2428 Comm: amd_bypass Tainted: G OE 5.11.0-34-generic #36~20.04.1-Ubuntu [ 117.731011] Hardware name: AMD CZN/, BIOS AB.FD 09/07/2021 [ 117.731012] RIP: 0010:0x0 [ 117.731015] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [ 117.731016] RSP: 0018:ffffa8d64225bab8 EFLAGS: 00010246 [ 117.731017] RAX: 0000000000000000 RBX: 0000000000000020 RCX: ffffa8d64225bb5e [ 117.731018] RDX: ffff93151d921880 RSI: ffffa8d64225bac8 RDI: ffff931511a1a9d8 [ 117.731022] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 117.731023] CR2: ffffffffffffffd6 CR3: 000000010d5a4000 CR4: 0000000000750ee0 [ 117.731023] PKRU: 55555554 [ 117.731024] Call Trace: [ 117.731027] drm_dp_dpcd_access+0x72/0x110 [drm_kms_helper] [ 117.731036] drm_dp_dpcd_read+0xb7/0xf0 [drm_kms_helper] [ 117.731040] drm_dp_start_crc+0x38/0xb0 [drm_kms_helper] [ 117.731047] amdgpu_dm_crtc_set_crc_source+0x1ae/0x3e0 [amdgpu] [ 117.731149] crtc_crc_open+0x174/0x220 [drm] [ 117.731162] full_proxy_open+0x168/0x1f0 [ 117.731165] ? open_proxy_open+0x100/0x100 BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1546 Reviewed-by: Harry Wentland <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Perry Yuan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.