aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2010-06-01drm/vmwgfx: Remove duplicate member from struct vmw_legacy_display_unit.Jakob Bornecrantz1-4/+2
Signed-off-by: Jakob Bornecrantz <[email protected]> Signed-off-by: Thomas Hellstrom <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-01drm/vmwgfx: Reserve first part of VRAM for framebuffer.Thomas Hellstrom1-2/+39
The host may be touching this part of VRAM at modesetting, even if we never use it ourselves, since we blit screen updates from 3D surfaces. Make sure no DMA buffers are placed in this part of VRAM. V2: Fix an error check in vmw_surface_dmabuf_pin(). Signed-off-by: Thomas Hellstrom <[email protected]> Signed-off-by: Jakob Bornecrantz <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-01drm/vmwgfx: Support older hardware.Jakob Bornecrantz6-107/+148
V2: Fix a couple of typos. Signed-off-by: Jakob Bornecrantz <[email protected]> Signed-off-by: Thomas Hellstrom <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-01drm/vmwgfx: Get connector status from detection function.Jakob Bornecrantz1-7/+3
Also make sure the ldu::active member is properly initialized. Part of fix by Michel Daenzer <[email protected]>. Signed-off-by: Jakob Bornecrantz <[email protected]> Signed-off-by: Michel Daenzer <[email protected]> Signed-off-by: Thomas Hellstrom <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-01drm/vmwgfx: Add kernel throttling support. Bump minor.Thomas Hellstrom6-6/+227
The throttle_us member in the execbuf argument is now honored. If the member is 0, no waiting for lag will occur, which guarantees backwards compatibility with well-behaved clients. Signed-off-by: Thomas Hellstrom <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-01drm/vmwgfx: Make sure to unpin old and pin new framebuffer.Jakob Bornecrantz1-6/+11
Signed-off-by: Jakob Bornecrantz <[email protected]> Signed-off-by: Thomas Hellstrom <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-01drm/vmwgfx: Fix single framebuffer detection.Jakob Bornecrantz1-0/+3
V2: Fix a typo. Signed-off-by: Jakob Bornecrantz <[email protected]> Signed-off-by: Thomas Hellstrom <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-01drm/vmwgfx: Assume larger framebuffer max size.Jakob Bornecrantz1-2/+3
Signed-off-by: Jakob Bornecrantz <[email protected]> Signed-off-by: Thomas Hellstrom <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-05-31Input: s3c2410_ts - tone down loggingMark Brown1-1/+1
The S3C touchscreen driver is logging at LOG_INFO on every stylus up event which spams the console needlessly. Reduce the priority of the message to debug level for some peace and quiet. Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2010-05-31Input: s3c2410_ts - fix build error due to ADC Kconfig renameMark Brown1-1/+1
The name of the Kconfig symbol for the ADC has changed as a result of application to more SoCs but the select statement has not been updated, causing linker failures as the ADC core has not been built. Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2010-05-31greth: Fix build after OF device conversions.David S. Miller1-6/+5
Signed-off-by: David S. Miller <[email protected]>
2010-05-31Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller2034-80857/+206098
2010-05-31sh: prepare MMCIF driver header fileMagnus Damm1-75/+50
Update the MMCIF driver to include register information and register access functions in the header file. The MMCIF boot code builds on top of this. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-05-31Merge branch 'master' of ↵Paul Mundt562-11323/+81478
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2010-05-30Merge branch 'for-next' of ↵Linus Torvalds47-955/+7260
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (47 commits) mfd: Rename twl5031 sih modules mfd: Storage class for timberdale should be before const qualifier mfd: Remove unneeded and dangerous clearing of clientdata mfd: New AB8500 driver gpio: Fix inverted rdc321x gpio data out registers mfd: Change rdc321x resources flags to IORESOURCE_IO mfd: Move pcf50633 irq related functions to its own file. mfd: Use threaded irq for pcf50633 mfd: pcf50633-adc: Fix potential race in pcf50633_adc_sync_read mfd: Fix pcf50633 bitfield logic in interrupt handler gpio: rdc321x needs to select MFD_CORE mfd: Use menuconfig for quicker config editing ARM: AB3550 board configuration and irq for U300 mfd: AB3550 core driver mfd: AB3100 register access change to abx500 API mfd: Renamed ab3100.h to abx500.h gpio: Add TC35892 GPIO driver mfd: Add Toshiba's TC35892 MFD core mfd: Delay to mask tsc irq in max8925 mfd: Remove incorrect wm8350 kfree ...
2010-05-30Merge branch 'next' of ↵Linus Torvalds3-0/+876
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: DMAENGINE: DMA40 U8500 platform configuration DMA: PL330: Add dma api driver
2010-05-30Merge branch 'for-linus' of ↵Linus Torvalds5-622/+203
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/qib: Remove DCA support until feature is finished IB/qib: Use a single txselect module parameter for serdes tuning IB/qib: Don't rely on (undefined) order of function parameter evaluation IB/ucm: Use memdup_user() IB/qib: Fix undefined symbol error when CONFIG_PCI_MSI=n
2010-05-30Merge branch 'for_linus' of ↵Linus Torvalds1-8/+0
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: quota: Convert quota statistics to generic percpu_counter ext3 uses rb_node = NULL; to zero rb_root. quota: Fixup dquot_transfer reiserfs: Fix resuming of quotas on remount read-write pohmelfs: Remove dead quota code ufs: Remove dead quota code udf: Remove dead quota code quota: rename default quotactl methods to dquot_ quota: explicitly set ->dq_op and ->s_qcop quota: drop remount argument to ->quota_on and ->quota_off quota: move unmount handling into the filesystem quota: kill the vfs_dq_off and vfs_dq_quota_on_remount wrappers quota: move remount handling into the filesystem ocfs2: Fix use after free on remount read-only Fix up conflicts in fs/ext4/super.c and fs/ufs/file.c
2010-05-30rapidio: fix new kernel-doc warningsRandy Dunlap2-5/+7
Fix a bunch of new rapidio kernel-doc warnings: Warning(include/linux/rio.h:123): No description found for parameter 'comp_tag' Warning(include/linux/rio.h:123): No description found for parameter 'phys_efptr' Warning(include/linux/rio.h:123): No description found for parameter 'em_efptr' Warning(include/linux/rio.h:123): No description found for parameter 'pwcback' Warning(include/linux/rio.h:247): No description found for parameter 'set_domain' Warning(include/linux/rio.h:247): No description found for parameter 'get_domain' Warning(drivers/rapidio/rio-scan.c:1133): No description found for parameter 'rdev' Warning(drivers/rapidio/rio-scan.c:1133): Excess function parameter 'port' description in 'rio_init_em' Warning(drivers/rapidio/rio.c:349): No description found for parameter 'rdev' Warning(drivers/rapidio/rio.c:349): Excess function parameter 'mport' description in 'rio_request_inb_pwrite' Warning(drivers/rapidio/rio.c:393): No description found for parameter 'port' Warning(drivers/rapidio/rio.c:393): No description found for parameter 'local' Warning(drivers/rapidio/rio.c:393): No description found for parameter 'destid' Warning(drivers/rapidio/rio.c:393): No description found for parameter 'hopcount' Warning(drivers/rapidio/rio.c:393): Excess function parameter 'rdev' description in 'rio_mport_get_physefb' Warning(drivers/rapidio/rio.c:845): Excess function parameter 'local' description in 'rio_std_route_clr_table' Signed-off-by: Randy Dunlap <[email protected]> Cc: Alexandre Bounine <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-05-29be2net: remove superfluous externsDan Carpenter1-2/+2
This fixes some sparse warnings: drivers/net/benet/be_cmds.c:1503:12: warning: function 'be_cmd_enable_magic_wol' with external linkage has definition drivers/net/benet/be_cmds.c:1668:12: warning: function 'be_cmd_get_seeprom_data' with external linkage has definition Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Sarveshwar Bandi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-05-29be2net: add unlock on error pathDan Carpenter1-2/+5
The unlock accidentally got removed from the error path in dd131e76e5: "be2net: Bug fix to avoid disabling bottom half during firmware upgrade." Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Sarveshwar Bandi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-05-29drivers/isdn/hardware/mISDN: Add missing spin_unlockJulia Lawall1-1/+3
Add a spin_unlock missing on the error path. The return value of write_reg seems to be completely ignored, so it seems that the lock should be released in every case. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E1; @@ * spin_lock(E1,...); <+... when != E1 if (...) { ... when != E1 * return ...; } ...+> * spin_unlock(E1,...); // </smpl> Signed-off-by: Julia Lawall <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-05-29fs_enet: Adjust BDs after tx errorMark Ware1-6/+43
This patch fixes an occasional transmit lockup in the mac-fcc which occurs after a tx error. The test scenario had the local port set to autoneg and the other end fixed at 100FD, resulting in a large number of late collisions. According to the MPC8280RM 30.10.1.3 (also 8272RM 29.10.1.3), after a tx error occurs, TBPTR may sometimes point beyond BDs still marked as ready. This patch walks back through the BDs and points TBPTR to the earliest one marked as ready. Tested on a custom board with a MPC8280. Signed-off-by: Mark Ware <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-05-28Merge branch 'master' of ↵David S. Miller6-11/+26
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-05-28ACPI / EC / PM: Fix names of functions that block/unblock EC transactionsRafael J. Wysocki3-17/+17
The names of the functions used for blocking/unblocking EC transactions during suspend/hibernation suggest that the transactions are suspended and resumed by them, while in fact they are disabled and enabled. Rename the functions (and the flag used by them) to better reflect what they really do. Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Len Brown <[email protected]>
2010-05-28ACPI / EC / PM: Fix race between EC transactions and system suspendRafael J. Wysocki3-26/+40
There still is a race that may result in suspending the system in the middle of an EC transaction in progress, which leads to problems (like the kernel thinking that the ACPI global lock is held during resume while in fact it's not). To remove the race condition, modify the ACPI platform suspend and hibernate callbacks so that EC transactions are blocked right after executing the _PTS global control method and are allowed to happen again right after the low-level wakeup. Introduce acpi_pm_freeze() that will disable GPEs, wait until the event queues are empty and block EC transactions. Use it wherever GPEs are disabled in preparation for switching local interrupts off. Introduce acpi_pm_thaw() that will allow EC transactions to happen again and enable runtime GPEs. Use it to balance acpi_pm_freeze() wherever necessary. In addition to that use acpi_ec_resume_transactions_early() to unblock EC transactions as early as reasonably possible during resume. Also unblock EC transactions in acpi_hibernation_finish() and in the analogous suspend routine to make sure that the EC transactions are enabled in all error paths. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=14668 Signed-off-by: Rafael J. Wysocki <[email protected]> Reported-and-tested-by: Maxim Levitsky <[email protected]> Signed-off-by: Len Brown <[email protected]>
2010-05-28Merge branch 'drm-linus' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon: fix the r100/r200 ums block 0 page fix
2010-05-28Merge branch 'idle-release' of ↵Linus Torvalds11-37/+524
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6 * 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6: intel_idle: native hardware cpuidle driver for latest Intel processors ACPI: acpi_idle: touch TS_POLLING only in the non-MWAIT case acpi_pad: uses MONITOR/MWAIT, so it doesn't need to clear TS_POLLING sched: clarify commment for TS_POLLING ACPI: allow a native cpuidle driver to displace ACPI cpuidle: make cpuidle_curr_driver static cpuidle: add cpuidle_unregister_driver() error check cpuidle: fail to register if !CONFIG_CPU_IDLE
2010-05-28Merge branch 'release' of ↵Linus Torvalds29-402/+3611
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (27 commits) ACPI: Don't let acpi_pad needlessly mark TSC unstable drivers/acpi/sleep.h: Checkpatch cleanup ACPI: Minor cleanup eliminating redundant PMTIMER_TICKS to NS conversion ACPI: delete unused c-state promotion/demotion data strucutures ACPI: video: fix acpi_backlight=video ACPI: EC: Use kmemdup drivers/acpi: use kasprintf ACPI, APEI, EINJ injection parameters support Add x64 support to debugfs ACPI, APEI, Use ERST for persistent storage of MCE ACPI, APEI, Error Record Serialization Table (ERST) support ACPI, APEI, Generic Hardware Error Source memory error support ACPI, APEI, UEFI Common Platform Error Record (CPER) header Unified UUID/GUID definition ACPI Hardware Error Device (PNP0C33) support ACPI, APEI, PCIE AER, use general HEST table parsing in AER firmware_first setup ACPI, APEI, Document for APEI ACPI, APEI, EINJ support ACPI, APEI, HEST table parsing ACPI, APEI, APEI supporting infrastructure ...
2010-05-29drm/radeon: fix the r100/r200 ums block 0 page fixDave Airlie1-2/+3
airlied -> brown paper bag. I blame Hi-5 or the Wiggles for lowering my IQ, move the fix inside some brackets instead of breaking everything in site. Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]>
2010-05-28Merge branch 'ht-delete-2.6.35' into releaseLen Brown1-2/+2
2010-05-28Merge branch 'misc-2.6.35' into releaseLen Brown5-26/+30
2010-05-28Merge branches 'video' and 'video-edid' into releaseLen Brown2-9/+103
2010-05-28Merge branch 'acpi_enable' into releaseLen Brown3-186/+24
2010-05-28Merge branch 'bjorn-pci-root-v4-2.6.35' into releaseLen Brown1-27/+40
2010-05-28ACPI: Don't let acpi_pad needlessly mark TSC unstableVenkatesh Pallipadi1-2/+11
acpi pad driver kind of aggressively marks TSC as unstable at init time, on mwait capable and non X86_FEATURE_NONSTOP_TSC systems. This is irrespective of whether pad driver is ever going to be used on the system or deep C-states are supported/used. This will affect every user who just happens to compile in (or get a kernel version which compiles in) acpi pad driver. Move mark_tsc_unstable() out of init to the actual idle invocation path of the pad driver. There is also another bug/missing_feature in the code that it does not support 'always running apic timer' and switches to broadcast mode unconditionally. Shaohua, can you take a look at that please. Signed-off-by: Venkatesh Pallipadi <[email protected]> Signed-off-by: Len Brown <[email protected]>
2010-05-28drivers/acpi/sleep.h: Checkpatch cleanupAndrea Gelmini1-1/+1
drivers/acpi/sleep.h:3: WARNING: space prohibited between function name and open parenthesis '(' Signed-off-by: Andrea Gelmini <[email protected]> Signed-off-by: Len Brown <[email protected]>
2010-05-28ACPI: Minor cleanup eliminating redundant PMTIMER_TICKS to NS conversionVenkatesh Pallipadi1-4/+10
acpi_enter_[simple,bm] does idle timing in ns, convert it to timeval, then to us, then to pmtimer_ticks and then back to ns. This patch changes things to idle timing in ns, convert it to us, and then to pmtimer_ticks. Just saves an imul along this path, but makes the code cleaner. Signed-off-by: Venkatesh Pallipadi <[email protected]> Signed-off-by: Len Brown <[email protected]>
2010-05-28intel_idle: native hardware cpuidle driver for latest Intel processorsLen Brown5-2/+479
This EXPERIMENTAL driver supersedes acpi_idle on Intel Atom Processors, Intel Core i3/i5/i7 Processors and associated Intel Xeon processors. It does not support the Intel Core2 processor or earlier. For kernels configured with ACPI, CONFIG_INTEL_IDLE=y allows intel_idle to probe before the ACPI processor driver. Booting with "intel_idle.max_cstate=0" disables intel_idle and the system will fall back on ACPI's "acpi_idle". Typical Linux distributions load ACPI processor module early, making CONFIG_INTEL_IDLE=m not easily useful on ACPI platforms. intel_idle probes all processors at module_init time. Processors that are hot-added later will be limited to using C1 in idle. Signed-off-by: Len Brown <[email protected]>
2010-05-28drm/i915: Unmask interrupt for render engine on SandybridgeZhenyu Wang1-0/+19
With splitted engines on Sandybridge, each engine has its own interrupt control as well. This unmasks the interrupt to properly enable pipe control notify event for render engine. Signed-off-by: Zhenyu Wang <[email protected]> Signed-off-by: Eric Anholt <[email protected]>
2010-05-28drm/i915: Fix PIPE_CONTROL command on SandybridgeZhenyu Wang1-2/+14
Sandybridge(Gen6) has new format for PIPE_CONTROL command, the flush and post-op control are in dword 1 now. This changes command length field for difference between Ironlake and Sandybridge. I tried to test this with noop request and issue PIPE_CONTROL command for each sequence and track notify interrupts, which seems work fine. Hopefully we don't need workaround like on Ironlake for Sandybridge. Signed-off-by: Zhenyu Wang <[email protected]> Signed-off-by: Eric Anholt <[email protected]>
2010-05-28drm/i915: Fix up address spaces in slow_kernel_write()Chris Wilson1-25/+17
Since we now get_user_pages() outside of the mutex prior to performing the copy, we kmap() the page inside the copy routine and so need to perform an ordinary memcpy() and not copy_from_user(). Signed-off-by: Chris Wilson <[email protected]> Signed-off-by: Eric Anholt <[email protected]>
2010-05-28drm/i915: Use non-atomic kmap for slow copy pathsChris Wilson1-52/+30
As we do not have a requirement to be atomic and avoid sleeping whilst performing the slow copy for shmem based pread and pwrite, we can use kmap instead, thus simplifying the code. Signed-off-by: Chris Wilson <[email protected]> Signed-off-by: Eric Anholt <[email protected]>
2010-05-28drm/i915: Avoid moving from CPU domain during pwriteChris Wilson1-1/+2
We can avoid an early clflush when pwriting if we use the current CPU write domain rather than moving the object to the GTT domain for the purposes of the pwrite. This has the advantage of not flushing the presumably hot data that we want to upload into the bo, and of ascribing the clflush to the execution when profiling. Signed-off-by: Chris Wilson <[email protected]> Signed-off-by: Eric Anholt <[email protected]>
2010-05-28drm/i915: Cleanup after failed initialization of ringbuffersChris Wilson1-1/+18
The callers expect us to cleanup any partially initialised structures before reporting the error. Signed-off-by: Chris Wilson <[email protected]> Signed-off-by: Eric Anholt <[email protected]>
2010-05-28ACPI: acpi_idle: touch TS_POLLING only in the non-MWAIT caseLen Brown1-12/+16
commit d306ebc28649b89877a22158fe0076f06cc46f60 (ACPI: Be in TS_POLLING state during mwait based C-state entry) fixed an important power & performance issue where ACPI c2 and c3 C-states were clearing TS_POLLING even when using MWAIT (ACPI_STATE_FFH). That bug had been causing us to receive redundant scheduling interrups when we had already been woken up by MONITOR/MWAIT. Following up on that... In the MWAIT case, we don't have to subsequently check need_resched(), as that c heck was there for the TS_POLLING-clearing case. Note that not only does the cpuidle calling function already check need_resched() before calling us, the low-level entry into monitor/mwait calls it twice -- guaranteeing that a write to the trigger address can not go un-noticed. Also, in this case, we don't have to set TS_POLLING when we wake, because we never cleared it. Signed-off-by: Len Brown <[email protected]> Acked-by: Venkatesh Pallipadi <[email protected]>
2010-05-28ssb: fix NULL ptr deref when pcihost_wrapper is usedChristoph Fritz2-3/+7
Ethernet driver b44 does register ssb by it's pcihost_wrapper and doesn't set ssb_chipcommon. A check on this value introduced with commit d53cdbb94a52a920d5420ed64d986c3523a56743 and ea2db495f92ad2cf3301623e60cb95b4062bc484 triggers: BUG: unable to handle kernel NULL pointer dereference at 00000010 IP: [<c1266c36>] ssb_is_sprom_available+0x16/0x30 Signed-off-by: Christoph Fritz <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2010-05-28drm/i915: Reject bind_to_gtt() early if object > apertureChris Wilson1-0/+8
If the object is bigger than the entire aperture, reject it early before evicting everything in a vain attempt to find space. v2: Use E2BIG as suggested by Owain G. Ainsworth. Signed-off-by: Chris Wilson <[email protected]> Cc: [email protected] Signed-off-by: Eric Anholt <[email protected]>
2010-05-28drm/i915: Check error code whilst moving buffer to GTT domain.Chris Wilson1-1/+5
Signed-off-by: Chris Wilson <[email protected]> Signed-off-by: Eric Anholt <[email protected]>
2010-05-28drm/i915: Remove spurious warning "Failure to install fence"Chris Wilson1-6/+11
This particular warning is harmless as we emit during the normal pinning process where the batch buffer requires more fences than is available without eviction. Only if we fail to evict enough fences does this become a problem, so include the requested number of fences in the ultimate *error* message. v2: Remember to compile test even trial patches to remove warnings. Signed-off-by: Chris Wilson <[email protected]> Signed-off-by: Eric Anholt <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.