aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-11-01Merge tag 'for-5.16/cdrom-2021-10-29' of git://git.kernel.dk/linux-blockLinus Torvalds1-6/+57
Pull CDROM updates from Jens Axboe: "On behalf of Phillip, here are the CDROM updates for the 5.16-rc1 merge window: - Add ioctl for improved media change detection (Lukas) - Reformat some documentation (Phillip) - Redundant variable removal (luo)" * tag 'for-5.16/cdrom-2021-10-29' of git://git.kernel.dk/linux-block: cdrom: Remove redundant variable and its assignment cdrom: docs: reformat table in Documentation/userspace-api/ioctl/cdrom.rst drivers/cdrom: improved ioctl for media change detection
2021-11-01Merge tag 'for-5.16/scsi-ma-2021-10-29' of git://git.kernel.dk/linux-blockLinus Torvalds4-11/+176
Pull SCSI multi-actuator support from Jens Axboe: "This adds SCSI support for the recently merged block multi-actuator support. Since this was sitting on top of the block tree, the SCSI side asked me to queue it up." * tag 'for-5.16/scsi-ma-2021-10-29' of git://git.kernel.dk/linux-block: doc: Fix typo in request queue sysfs documentation doc: document sysfs queue/independent_access_ranges attributes libata: support concurrent positioning ranges log scsi: sd: add concurrent positioning ranges support
2021-11-01Merge tag 'for-5.16/bdev-size-2021-10-29' of git://git.kernel.dk/linux-blockLinus Torvalds29-60/+46
Pull bdev size cleanups from Jens Axboe: "Clean up the bdev size handling with new bdev_nr_bytes() helper" * tag 'for-5.16/bdev-size-2021-10-29' of git://git.kernel.dk/linux-block: (34 commits) partitions/ibm: use bdev_nr_sectors instead of open coding it partitions/efi: use bdev_nr_bytes instead of open coding it block/ioctl: use bdev_nr_sectors and bdev_nr_bytes block: cache inode size in bdev udf: use sb_bdev_nr_blocks reiserfs: use sb_bdev_nr_blocks ntfs: use sb_bdev_nr_blocks jfs: use sb_bdev_nr_blocks ext4: use sb_bdev_nr_blocks block: add a sb_bdev_nr_blocks helper block: use bdev_nr_bytes instead of open coding it in blkdev_fallocate squashfs: use bdev_nr_bytes instead of open coding it reiserfs: use bdev_nr_bytes instead of open coding it pstore/blk: use bdev_nr_bytes instead of open coding it ntfs3: use bdev_nr_bytes instead of open coding it nilfs2: use bdev_nr_bytes instead of open coding it nfs/blocklayout: use bdev_nr_bytes instead of open coding it jfs: use bdev_nr_bytes instead of open coding it hfsplus: use bdev_nr_sectors instead of open coding it hfs: use bdev_nr_sectors instead of open coding it ...
2021-11-01Merge tag 'for-5.16/drivers-2021-10-29' of git://git.kernel.dk/linux-blockLinus Torvalds74-1510/+1902
Pull block driver updates from Jens Axboe: - paride driver cleanups (Christoph) - Remove cryptoloop support (Christoph) - null_blk poll support (me) - Now that add_disk() supports proper error handling, add it to various drivers (Luis) - Make ataflop actually work again (Michael) - s390 dasd fixes (Stefan, Heiko) - nbd fixes (Yu, Ye) - Remove redundant wq flush in mtip32xx (Christophe) - NVMe updates - fix a multipath partition scanning deadlock (Hannes Reinecke) - generate uevent once a multipath namespace is operational again (Hannes Reinecke) - support unique discovery controller NQNs (Hannes Reinecke) - fix use-after-free when a port is removed (Israel Rukshin) - clear shadow doorbell memory on resets (Keith Busch) - use struct_size (Len Baker) - add error handling support for add_disk (Luis Chamberlain) - limit the maximal queue size for RDMA controllers (Max Gurtovoy) - use a few more symbolic names (Max Gurtovoy) - fix error code in nvme_rdma_setup_ctrl (Max Gurtovoy) - add support for ->map_queues on FC (Saurav Kashyap) - support the current discovery subsystem entry (Hannes Reinecke) - use flex_array_size and struct_size (Len Baker) - bcache fixes (Christoph, Coly, Chao, Lin, Qing) - MD updates (Christoph, Guoqing, Xiao) - Misc fixes (Dan, Ding, Jiapeng, Shin'ichiro, Ye) * tag 'for-5.16/drivers-2021-10-29' of git://git.kernel.dk/linux-block: (117 commits) null_blk: Fix handling of submit_queues and poll_queues attributes block: ataflop: Fix warning comparing pointer to 0 bcache: replace snprintf in show functions with sysfs_emit bcache: move uapi header bcache.h to bcache code directory nvmet: use flex_array_size and struct_size nvmet: register discovery subsystem as 'current' nvmet: switch check for subsystem type nvme: add new discovery log page entry definitions block: ataflop: more blk-mq refactoring fixes block: remove support for cryptoloop and the xor transfer mtd: add add_disk() error handling rnbd: add error handling support for add_disk() um/drivers/ubd_kern: add error handling support for add_disk() m68k/emu/nfblock: add error handling support for add_disk() xen-blkfront: add error handling support for add_disk() bcache: add error handling support for add_disk() dm: add add_disk() error handling block: aoe: fixup coccinelle warnings nvmet: use struct_size over open coded arithmetic nvme: drop scan_lock and always kick requeue list when removing namespaces ...
2021-11-01Merge tag 'for-5.16/block-2021-10-29' of git://git.kernel.dk/linux-blockLinus Torvalds69-340/+412
Pull block updates from Jens Axboe: - mq-deadline accounting improvements (Bart) - blk-wbt timer fix (Andrea) - Untangle the block layer includes (Christoph) - Rework the poll support to be bio based, which will enable adding support for polling for bio based drivers (Christoph) - Block layer core support for multi-actuator drives (Damien) - blk-crypto improvements (Eric) - Batched tag allocation support (me) - Request completion batching support (me) - Plugging improvements (me) - Shared tag set improvements (John) - Concurrent queue quiesce support (Ming) - Cache bdev in ->private_data for block devices (Pavel) - bdev dio improvements (Pavel) - Block device invalidation and block size improvements (Xie) - Various cleanups, fixes, and improvements (Christoph, Jackie, Masahira, Tejun, Yu, Pavel, Zheng, me) * tag 'for-5.16/block-2021-10-29' of git://git.kernel.dk/linux-block: (174 commits) blk-mq-debugfs: Show active requests per queue for shared tags block: improve readability of blk_mq_end_request_batch() virtio-blk: Use blk_validate_block_size() to validate block size loop: Use blk_validate_block_size() to validate block size nbd: Use blk_validate_block_size() to validate block size block: Add a helper to validate the block size block: re-flow blk_mq_rq_ctx_init() block: prefetch request to be initialized block: pass in blk_mq_tags to blk_mq_rq_ctx_init() block: add rq_flags to struct blk_mq_alloc_data block: add async version of bio_set_polled block: kill DIO_MULTI_BIO block: kill unused polling bits in __blkdev_direct_IO() block: avoid extra iter advance with async iocb block: Add independent access ranges support blk-mq: don't issue request directly in case that current is to be blocked sbitmap: silence data race warning blk-cgroup: synchronize blkg creation against policy deactivation block: refactor bio_iov_bvec_set() block: add single bio async direct IO helper ...
2021-11-01Merge tag 'tpmdd-next-v5.16' of ↵Linus Torvalds5-9/+27
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull tpm updates from Jarkko Sakkinen: "Only bug fixes" * tag 'tpmdd-next-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: tpm_tis_spi: Add missing SPI ID tpm: fix Atmel TPM crash caused by too frequent queries tpm: Check for integer overflow in tpm2_map_response_body() tpm: tis: Kconfig: Add helper dependency on COMPILE_TEST
2021-11-01amt: add mld report message handlerTaehee Yoo1-7/+440
In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-01amt: add multicast(IGMP) report message handlerTaehee Yoo1-1/+1131
amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-01amt: add data plane of amt interfaceTaehee Yoo1-1/+1241
Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-01amt: add control plane of amt interfaceTaehee Yoo3-0/+510
It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-01netdevsim: rename 'driver' entry pointsJakub Kicinski3-14/+14
Rename functions serving as driver entry points from nsim_dev_... to nsim_drv_... this makes the API boundary between bus and dev clearer. Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-01netdevsim: move max vf config to devJakub Kicinski3-82/+64
max_vfs is a strange little beast because the file hangs off of nsim's debugfs, but it configures a field in the bus device. Move it to dev.c, let's look at it as if the device driver was imposing VF limit based on FW info (like pci_sriov_set_totalvfs()). Again, when moving refactor the function not to hold the vfs lock pointlessly while parsing the input. Wrap the access from the read side in READ_ONCE() to appease concurrency checkers. Do not check if return value from snprintf() is negative... Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-01netdevsim: move details of vf config to devJakub Kicinski3-73/+63
Since "eswitch" configuration was added bus.c contains a lot of device details which really belong to dev.c. Restructure the code while moving it. Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-01netdevsim: move vfconfig to nsim_devJakub Kicinski4-91/+111
When netdevsim got split into the faux bus vfconfig ended up in the bus device (think pci_dev) which is strange because it contains very networky not to say netdevy information. Move it to nsim_dev, which is the driver "priv" structure for the device. To make sure we don't race with probe/remove take the device lock (much like PCI). While at it remove the NULL-checking of vfconfigs. It appears to be pointless. Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-01netdevsim: take rtnl_lock when assigning num_vfsJakub Kicinski1-3/+11
Legacy VF NDOs look at num_vfs and then based on that index into vfconfig. If we don't rtnl_lock() num_vfs may get set to 0 and vfconfig freed/replaced while the NDO is running. We don't need to protect replacing vfconfig since it's only done when num_vfs is 0. Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-01net: mana: Support hibernation and kexecDexuan Cui3-52/+164
Implement the suspend/resume/shutdown callbacks for hibernation/kexec. Add mana_gd_setup() and mana_gd_cleanup() for some common code, and use them in the mand_gd_* callbacks. Reuse mana_probe/remove() for the hibernation path. Signed-off-by: Dexuan Cui <[email protected]> Reviewed-by: Haiyang Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-01net: mana: Improve the HWC error handlingDexuan Cui2-44/+31
Currently when the HWC creation fails, the error handling is flawed, e.g. if mana_hwc_create_channel() -> mana_hwc_establish_channel() fails, the resources acquired in mana_hwc_init_queues() is not released. Enhance mana_hwc_destroy_channel() to do the proper cleanup work and call it accordingly. Signed-off-by: Dexuan Cui <[email protected]> Reviewed-by: Haiyang Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-01net: mana: Report OS info to the PF driverDexuan Cui1-0/+11
The PF driver might use the OS info for statistical purposes. Signed-off-by: Dexuan Cui <[email protected]> Reviewed-by: Haiyang Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-01net: mana: Fix the netdev_err()'s vPort argument in mana_init_port()Dexuan Cui1-1/+2
Use the correct port index rather than 0. Signed-off-by: Dexuan Cui <[email protected]> Reviewed-by: Haiyang Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-01ibmvnic: delay complete()Sukadev Bhattiprolu1-7/+9
If we get CRQ_INIT, we set errno to -EIO and first call complete() to notify the waiter. Then we try to schedule a FAILOVER reset. If this occurs while adapter is in PROBING state, ibmvnic_reset() changes the error code to EAGAIN and returns without scheduling the FAILOVER. The purpose of setting error code to EAGAIN is to ask the waiter to retry. But due to the earlier complete() call, the waiter may already have seen the -EIO response and decided not to retry. This can cause intermittent failures when bringing up ibmvnic adapters during boot, specially in in kexec/kdump kernels. Defer the complete() call until after scheduling the reset. Also streamline the error code to EAGAIN. Don't see why we need EIO sometimes. All 3 callers of ibmvnic_reset_init() can handle EAGAIN. Fixes: 17c8705838a5 ("ibmvnic: Return error code if init interrupted by transport event") Reported-by: Vaishnavi Bhat <[email protected]> Signed-off-by: Sukadev Bhattiprolu <[email protected]> Reviewed-by: Dany Madden <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-01ibmvnic: Process crqs after enabling interruptsSukadev Bhattiprolu1-0/+3
Soon after registering a CRQ it is possible that we get a fail over or maybe a CRQ_INIT from the VIOS while interrupts were disabled. Look for any such CRQs after enabling interrupts. Otherwise we can intermittently fail to bring up ibmvnic adapters during boot, specially in kexec/kdump kernels. Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Reported-by: Vaishnavi Bhat <[email protected]> Signed-off-by: Sukadev Bhattiprolu <[email protected]> Reviewed-by: Dany Madden <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-01ibmvnic: don't stop queue in xmitSukadev Bhattiprolu1-2/+0
If adapter's resetting bit is on, discard the packet but don't stop the transmit queue - instead leave that to the reset code. With this change, it is possible that we may get several calls to ibmvnic_xmit() that simply discard packets and return. But if we stop the queue here, we might end up doing so just after __ibmvnic_open() started the queues (during a hard/soft reset) and before the ->resetting bit was cleared. If that happens, there will be no one to restart queue and transmissions will be blocked indefinitely. This can cause a TIMEOUT reset and with auto priority failover enabled, an unnecessary FAILOVER reset to less favored backing device and then a FAILOVER back to the most favored backing device. If we hit the window repeatedly, we can get stuck in a loop of TIMEOUT, FAILOVER, FAILOVER resets leaving the adapter unusable for extended periods of time. Fixes: 7f5b030830fe ("ibmvnic: Free skb's in cases of failure in transmit") Reported-by: Abdul Haleem <[email protected]> Reported-by: Vaishnavi Bhat <[email protected]> Signed-off-by: Sukadev Bhattiprolu <[email protected]> Reviewed-by: Dany Madden <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-01nfp: flower: Allow ipv6gretap interface for offloadingYu Xiao3-3/+4
The tunnel_type check only allows for "netif_is_gretap", but for OVS the port is actually "netif_is_ip6gretap" when setting up GRE for ipv6, which means offloading request was rejected before. Therefore, adding "netif_is_ip6gretap" allow ipv6gretap interface for offloading. Signed-off-by: Yu Xiao <[email protected]> Signed-off-by: Louis Peens <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-01Merge branch '100GbE' of ↵David S. Miller8-25/+98
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2021-10-29 This series contains updates to ice and iavf drivers and virtchnl header file. Brett removes vlan_promisc argument from a function call for ice driver. In the virtchnl header file he removes an unused, reserved define and converts raw value defines to instead use the BIT macro. Marcin adds syncing of MAC addresses when creating switchdev VFs to remove error messages on link up and stops showing buffer information for port representors to remove duplicated entries being displayed for ice driver. Karen introduces a helper to go from pci_dev to iavf_adapter in the iavf driver. Przemyslaw fixes an issue where iavf was attempting to free IRQs before calling disable. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-11-01Merge tag 'mlx5-updates-2021-10-29' of ↵David S. Miller26-267/+1189
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2021-10-29 1) Minor trivial refactoring and improvements 2) Check for unsupported parameters fields in SW steering 3) Support TC offload for OVS internal port, from Ariel, see below. Ariel Levkovich says: ===================== Support HW offload of TC rules involving OVS internal port device type as the filter device or the destination device. The support is for flows which explicitly use the internal port as source or destination device as well as indirect offload for flows performing tunnel set or unset via a tunnel device and the internal port is the tunnel overlay device. Since flows with internal port as source port are added as egress rules while redirecting to internal port is done as an ingress redirect, the series introduces the necessary changes in mlx5_core driver to support the new types of flows and actions. ===================== ==================== Signed-off-by: David S. Miller <[email protected]>
2021-10-31Merge tag 'kvmarm-5.16' of ↵Paolo Bonzini330-1569/+3011
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for Linux 5.16 - More progress on the protected VM front, now with the full fixed feature set as well as the limitation of some hypercalls after initialisation. - Cleanup of the RAZ/WI sysreg handling, which was pointlessly complicated - Fixes for the vgic placement in the IPA space, together with a bunch of selftests - More memcg accounting of the memory allocated on behalf of a guest - Timer and vgic selftests - Workarounds for the Apple M1 broken vgic implementation - KConfig cleanups - New kvmarm.mode=none option, for those who really dislike us
2021-10-30Merge tag 'scsi-fixes' of ↵Linus Torvalds6-295/+15
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three small fixes, all in drivers, and one sizeable update to the UFS driver to remove the HPB 2.0 feature that has been objected to by Jens and Christoph. Although the UFS patch is large and last minute, it's essentially the least intrusive way of resolving the objections in time for the 5.15 release" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: ufshpb: Remove HPB2.0 flows scsi: mpt3sas: Fix reference tag handling for WRITE_INSERT scsi: ufs: ufs-exynos: Correct timeout value setting registers scsi: ibmvfc: Fix up duplicate response detection
2021-10-30Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "One fix for the composite clk that broke when we changed this clk type to use the determine_rate instead of round_rate clk op by default. This caused lots of problems on Rockchip SoCs because they heavily use the composite clk code to model the clk tree" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: composite: Also consider .determine_rate for rate + mux composites
2021-10-30scsi: ufs: ufshpb: Remove HPB2.0 flowsAvri Altman3-288/+4
The Host Performance Buffer feature allows UFS read commands to carry the physical media addresses along with the LBAs, thus allowing less internal L2P-table switches in the device. HPB1.0 allowed a single LBA, while HPB2.0 increases this capacity up to 255 blocks. Carrying more than a single record, the read operation is no longer purely of type "read" but a "hybrid" command: Writing the physical address to the device in one operation and reading back the required payload in another. The JEDEC HPB spec defines two commands for this operation: HPB-WRITE-BUFFER (0x2) to write the physical addresses to device, and HPB-READ to read the payload. With the current HPB design the UFS driver has no alternative but to divide the READ request into 2 separate commands: HPB-WRITE-BUFFER and HPB-READ. This causes a great deal of aggravation to the block layer guys who demanded that we completely revert the entire HPB driver regardless of the huge amount of corporate effort already invested in it. As a compromise, remove only the pieces that implement the 2.0 specification. This is done as a matter of urgency for the final 5.15 release. Link: https://lore.kernel.org/r/[email protected] Tested-by: Avri Altman <[email protected]> Tested-by: Bean Huo <[email protected]> Reviewed-by: Bart Van Assche <[email protected]> Reviewed-by: Bean Huo <[email protected]> Co-developed-by: James Bottomley <[email protected]> Signed-off-by: James Bottomley <[email protected]> Signed-off-by: Avri Altman <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2021-10-29Merge branch '1GbE' of ↵Jakub Kicinski4-7/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 1GbE Intel Wired LAN Driver Updates 2021-10-29 This series contains updates to igc driver only. Sasha removes an unnecessary media type check, adds a new device ID, and changes a device reset to a port reset command. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-10-29bnxt_en: Remove not used other ULP defineLeon Romanovsky1-2/+1
There is only one bnxt ULP in the upstream kernel and definition for other ULP can be safely removed. Signed-off-by: Leon Romanovsky <[email protected]> Reviewed-by: Michael Chan <[email protected]> Link: https://lore.kernel.org/r/3a8ea720b28ec4574648012d2a00208f1144eff5.1635527693.git.leonro@nvidia.com Signed-off-by: Jakub Kicinski <[email protected]>
2021-10-29Merge branch '40GbE' of ↵Jakub Kicinski4-11/+18
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 40GbE Intel Wired LAN Driver Updates 2021-10-29 This series contains updates to i40e, ice, igb, and ixgbevf drivers. Yang Li simplifies return statements of bool values for i40e and ice. Jan Kundrát corrects problems with I2C bit-banging for igb. Colin Ian King removes unneeded variable initialization for ixgbevf. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-10-29netdevsim: remove max_vfs dentryJakub Kicinski2-6/+3
Commit d395381909a3 ("netdevsim: Add max_vfs to bus_dev") added this file and saved the dentry for no apparent reason. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-10-29mailbox: imx: support i.MX8ULP S4 MUPeng Fan1-37/+87
Like i.MX8 SCU, i.MX8ULP S4 also has vendor specific protocol. - bind SCU/S4 MU part to share one tx/rx/init API to make code simple. - S4 msg max size is very large, so alloc the space at driver probe, not use local on stack variable. - S4 MU has 8 TR and 4 RR which is different with i.MX8 MU, so adapt code to reflect this. Tested on i.MX8MP, i.MX8ULP Signed-off-by: Peng Fan <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
2021-10-29mailbox: pcc: Move bulk of PCCT parsing into pcc_mbox_probeSudeep Holla1-58/+66
Move the PCCT subspace parsing and allocation into pcc_mbox_probe so that we can get rid of global PCC channel and mailbox controller data. It also helps to make use of devm_* APIs for all the allocations. Signed-off-by: Sudeep Holla <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
2021-10-29mailbox: pcc: Add support for PCCT extended PCC subspaces(type 3/4)Sudeep Holla1-17/+109
With all the plumbing in place to avoid accessing PCCT type and other fields directly from the PCCT table all the time, let us now add the support for extended PCC subspaces(type 3 and 4). Signed-off-by: Sudeep Holla <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
2021-10-29mailbox: pcc: Drop handling invalid bit-width in {read,write}_registerSudeep Holla1-20/+4
pcc_chan_reg_init now checks if the register bit width is within the list [8, 16, 32, 64] and flags error if that is not the case. Therefore there is no need to handling invalid bit-width in both read_register and write_register. We can drop that along with the return values for these 2 functions. Signed-off-by: Sudeep Holla <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
2021-10-29mailbox: pcc: Avoid accessing PCCT table in pcc_send_data and pcc_mbox_irqSudeep Holla1-87/+32
Now that the con_priv is availvale solely for PCC mailbox controller driver, let us use the same to save the channel specific information in it so that we can it whenever required instead of parsing the PCCT table entries every time in both pcc_send_data and pcc_mbox_irq. We can now use the newly introduces PCC register bundle to simplify both saving of channel specific information and accessing them without repeated checks for the subspace type. Reviewed-by: Cristian Marussi <[email protected]> Signed-off-by: Sudeep Holla <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
2021-10-29mailbox: pcc: Add PCC register bundle and associated accessor functionsSudeep Holla1-0/+90
Extended PCC subspaces introduces more registers into the PCCT. In order to consolidate access to these registers and to keep all the details contained in one place, let us introduce PCC register bundle that holds the ACPI Generic Address Structure as well as the virtual address for the same if it is mapped in the OS. It also contains the various masks used to access the register and the associated read, write and read-modify-write accessors. We can also clean up the initialisations by having a helper function for the same. Signed-off-by: Sudeep Holla <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
2021-10-29mailbox: pcc: Rename doorbell ack to platform interrupt ack registerSudeep Holla1-16/+17
The specification refers this register and associated bitmask as platform interrupt acknowledge register. Let us rename it so that it is easier to map and understand. Signed-off-by: Sudeep Holla <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
2021-10-29mailbox: pcc: Use PCC mailbox channel pointer instead of standardSudeep Holla4-116/+58
Now that we have all the shared memory region information populated in the pcc_mbox_chan, let us propagate the pointer to the same as the return value to pcc_mbox_request channel. This eliminates the need for the individual users of PCC mailbox to parse the PCCT subspace entries and fetch the shmem information. This also eliminates the need for PCC mailbox controller to set con_priv to PCCT subspace entries. This is required as con_priv is private to the controller driver to attach private data associated with the channel and not meant to be used by the mailbox client/users. Let us convert all the users of pcc_mbox_{request,free}_channel to use new interface. Cc: Jean Delvare <[email protected]> Signed-off-by: Sudeep Holla <[email protected]> Acked-by: Wolfram Sang <[email protected]> Acked-by: Guenter Roeck <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
2021-10-29mailbox: pcc: Add pcc_mbox_chan structure to hold shared memory region infoSudeep Holla1-0/+27
Currently PCC mailbox controller sets con_priv in each channel to hold the pointer to pcct subspace entry it corresponds to. The mailbox user will then fetch this pointer from the channel descriptor they get when they request for the channel. Using that pointer they then parse the pcct entry again to fetch all the information about shared memory region. In order to remove individual users of PCC mailbox parsing the PCCT subspace entries to fetch same information, let us consolidate the same in pcc mailbox controller by parsing all the shared memory region information into a structure that can also hold the mbox_chan pointer it represent. This can then be used as main PCC mailbox channel pointer that we can return as part of pcc_mbox_request_channel instead of standard mailbox channel pointer. Reviewed-by: Cristian Marussi <[email protected]> Signed-off-by: Sudeep Holla <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
2021-10-29mailbox: pcc: Consolidate subspace doorbell register parsingSudeep Holla1-8/+23
Extended PCC subspaces(Type 3 and 4) differ from generic(Type 0) and HW-Reduced Communication(Type 1 and 2) subspace structures. However some fields share same offsets and same type of structure can be use to extract the fields. In order to simplify that, let us move all the doorbell register parsing into pcc_parse_subspace_db_reg and consolidate there. It will be easier to extend it if required within the same. Reviewed-by: Cristian Marussi <[email protected]> Signed-off-by: Sudeep Holla <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
2021-10-29mailbox: pcc: Consolidate subspace interrupt information parsingSudeep Holla1-19/+19
Extended PCC subspaces(Type 3 and 4) differ from generic(Type 0) and HW-Reduced Communication(Type 1 and 2) subspace structures. However some fields share same offsets and same type of structure can be use to extract the fields. In order to simplify that, let us move all the IRQ related information parsing into pcc_parse_subspace_irq and consolidate there. It will be easier to extend it if required within the same. Reviewed-by: Cristian Marussi <[email protected]> Signed-off-by: Sudeep Holla <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
2021-10-29mailbox: pcc: Refactor all PCC channel information into a structureSudeep Holla1-53/+54
Currently all the PCC channel specific information are stored/maintained in global individual arrays for each of those information. It is not scalable and not clean if we have to stash more channel specific information. Couple of reasons to stash more information are to extend the support to Type 3/4 PCCT subspace and also to avoid accessing the PCCT table entries themselves each time we need the information. This patch moves all those PCC channel specific information into a separate structure pcc_chan_info. Signed-off-by: Sudeep Holla <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
2021-10-29mailbox: pcc: Fix kernel doc warningsSudeep Holla1-1/+5
Kernel doc validation script is unhappy and complains with the below set of warnings. | drivers/mailbox/pcc.c:179: warning: Function parameter or member 'irq' | not described in 'pcc_mbox_irq' | drivers/mailbox/pcc.c:179: warning: Function parameter or member 'p' | not described in 'pcc_mbox_irq' | drivers/mailbox/pcc.c:378: warning: expecting prototype for | parse_pcc_subspaces(). Prototype was for parse_pcc_subspace() instead Fix it. Signed-off-by: Sudeep Holla <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
2021-10-29mailbox: apple: Add driver for Apple mailboxesSven Peter3-0/+398
Apple SoCs such as the M1 come with various co-processors. Mailboxes are used to communicate with those. This driver adds support for two variants of those mailboxes. Signed-off-by: Sven Peter <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
2021-10-29Merge tag 'gpio-fixes-for-v5.15' of ↵Linus Torvalds2-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix the return value check when parsing the ngpios property in gpio-xgs-iproc - check the return value of bgpio_init() in gpio-mlxbf2 * tag 'gpio-fixes-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: mlxbf2.c: Add check for bgpio_init failure gpio: xgs-iproc: fix parsing of ngpios property
2021-10-29net/mlx5: Support internal port as decap route deviceAriel Levkovich2-13/+40
When performing route device lookup for decap action, support the case of ovs internal port as the lookup result. In such case, an internal port struct is mapped and attached to the flow attributes so that the source port matching of the rule will match on the internal port's metadata value. Signed-off-by: Ariel Levkovich <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-10-29net/mlx5e: Term table handling of internal port rulesAriel Levkovich1-2/+2
Adjust termination table logic to handle rules which involve internal port as filter or forwarding device. For cases where the rule forwards from internal port to uplink, always choose to go via termination table. This is because it is not known from where the packet originally arrived to the internal port and it is possible that it came from the uplink itself, in which case a term table is required to perform hairpin. If the packet arrived from a vport, going via term table has no effect. For cases where the rule forwards to an internal port from uplink the rep pointer will point to the uplink rep, avoid going via termination table as it is not required. Signed-off-by: Ariel Levkovich <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.