aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2017-05-19watchdog: zx2967: remove redundant dev_err call in zx2967_wdt_probe()Wei Yongjun1-3/+1
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-19iTCO_wdt: all versions count down twicePaolo Bonzini1-12/+10
The ICH9 is listed as having TCO v2, and indeed the behavior in the datasheet corresponds to v2 (for example the NO_REBOOT flag is accessible via the 16KiB-aligned Root Complex Base Address). However, the TCO counts twice just like in v1; the documentation of the SECOND_TO_STS bit says: "ICH9 sets this bit to 1 to indicate that the TIMEOUT bit had been (or is currently) set and a second timeout occurred before the TCO_RLD register was written. If this bit is set and the NO_REBOOT config bit is 0, then the ICH9 will reboot the system after the second timeout. The same can be found in the BayTrail (Atom E3800) datasheet, and even HOWTOs around the Internet say that it will reboot after _twice_ the specified heartbeat. I did not find the Apollo Lake datasheet, but because v4/v5 has a SECOND_TO_STS bit just like the previous version I'm enabling this for Apollo Lake as well. Cc: linux-watchdog@vger.kernel.org Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-19firmware: ti_sci: fix strncat length checkArnd Bergmann1-1/+2
gcc-7 notices that the length we pass to strncat is wrong: drivers/firmware/ti_sci.c: In function 'ti_sci_probe': drivers/firmware/ti_sci.c:204:32: error: specified bound 50 equals the size of the destination [-Werror=stringop-overflow=] Instead of the total length, we must pass the length of the remaining space here. Fixes: aa276781a64a ("firmware: Add basic support for TI System Control Interface (TI-SCI) protocol") Cc: stable@vger.kernel.org Acked-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-05-19Merge tag 'usb-serial-4.12-rc2' of ↵Greg Kroah-Hartman7-16/+34
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.12-rc2 Here's a fix for a long-standing issue in the ftdi_sio driver that prevented unprivileged users from updating the low-latency flag, something which became apparent after a recent change that restored the older setting of not using low-latency mode by default. A run of sparse revealed a couple of endianness issues that are now fixed, and addressed is also a user-triggerable division-by-zero in io_ti when debugging is enabled. Finally there are some new device ids, including a simplification of how we deal with a couple of older Olimex JTAG adapters. All have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org>
2017-05-19Merge tag 'omap-for-v4.12/fixes-v2-signed' of ↵Olof Johansson1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps for v4.12-rc cycle most consisting of few minor dts fixes for various devices. Also included is a memory controller (GPMC) debug output fix as without that the shown bootloader configured GPMC bus width will be wrong and won't work for kernel timings: - Add dra7 powerhold configuration to be able to shut down pmic correctly - Fix polarity for gta04 mcbsp4 clocks for modem - Fix Pandaboard CEC pin pull making it usable - Fix LogicPD Torpedo camera pin mux - Fix GPMC debug bus width - Reduce cpu thermal shutdown temperature * tag 'omap-for-v4.12/fixes-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra7: Reduce cpu thermal shutdown temperature memory: omap-gpmc: Fix debug output for access width ARM: dts: LogicPD Torpedo: Fix camera pin mux ARM: dts: omap4: enable CEC pin for Pandaboard A4 and ES ARM: dts: gta04: fix polarity of clocks for mcbsp4 ARM: dts: dra7: Add power hold and power controller properties to palmas Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-19Merge tag 'imx-fixes-4.12' of ↵Olof Johansson1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes i.MX fixes for 4.12: - A fix on GPCv2 power domain driver Kconfig which causes a build failure when CONFIG_PM is not set. - Pull down PMIC IRQ pin for imx53-qsrb board to prevent spurious PMIC interrupts from happening. - Remove board level OPP override for imx6sx-sdb to fix a boot crash seen on Rev.C boards. * tag 'imx-fixes-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: add PM dependency for IMX7_PM_DOMAINS ARM: dts: imx6sx-sdb: Remove OPP override ARM: dts: imx53-qsrb: Pulldown PMIC IRQ pin Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18Merge tag 'arm-soc/for-4.12/drivers-fixes' of ↵Olof Johansson1-1/+1
http://github.com/Broadcom/stblinux into fixes This pull request contains Broadcom SoC drivers fixes for 4.12, please pull the following: - Florian removes the duplicate compatible string matched by the SUN_TOP_CTRL driver and instead uses the correct one for 7435 * tag 'arm-soc/for-4.12/drivers-fixes' of http://github.com/Broadcom/stblinux: soc: bcm: brcmstb: Correctly match 7435 SoC Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18Merge tag 'v4.12-rc1' into fixesOlof Johansson642-9987/+21725
We've received a few fixes branches with -rc1 as base, but our contents was still at pre-rc1. Merge it in expliticly to make 'git merge --log' clear on hat was actually merged. Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-19Merge tag 'drm-intel-fixes-2017-05-18-1' of ↵Dave Airlie8-18/+35
git://anongit.freedesktop.org/git/drm-intel into drm-fixes drm/i915 fixes for v4.12-rc2 * tag 'drm-intel-fixes-2017-05-18-1' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: don't do allocate_va_range again on PIN_UPDATE drm/i915: Fix rawclk readout for g4x drm/i915: Fix runtime PM for LPE audio drm/i915/glk: Fix DSI "*ERROR* ULPS is still active" messages drm/i915/gvt: avoid unnecessary vgpu switch drm/i915/gvt: not to restore in-context mmio drm/i915/gvt: fix typo: "supporte" -> "support"
2017-05-19Merge branch 'linux-4.12' of git://github.com/skeggsb/linux into drm-fixesDave Airlie4-9/+10
misc nouveau fixes. * 'linux-4.12' of git://github.com/skeggsb/linux: drm/nouveau/fifo/gk104-: Silence a locking warning drm/nouveau/secboot: plug memory leak in ls_ucode_img_load_gr() error path drm/nouveau: Fix drm poll_helper handling
2017-05-19Merge tag 'drm-misc-fixes-2017-05-18' of ↵Dave Airlie2-22/+15
git://anongit.freedesktop.org/git/drm-misc into drm-fixes Driver Changes: - host1x: Fix link error when host1x is built-in and iova is a module (Arnd) - hlcdc: Fix arguments passed to drm_of_find_panel_or_bridge (Boris) Cc: Arnd Bergmann <arnd@arndb.de> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> * tag 'drm-misc-fixes-2017-05-18' of git://anongit.freedesktop.org/git/drm-misc: drm/atmel-hlcdc: Fix output initialization gpu: host1x: select IOMMU_IOVA
2017-05-19Merge branch 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux ↵Dave Airlie1-1/+3
into drm-fixes one etnaviv fence leak fix. * 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux: drm/etnaviv: don't put fence in case of submit failure
2017-05-18Merge tag 'md/4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds8-86/+209
Pull MD fixes from Shaohua Li: - Several bug fixes for raid5-cache from Song Liu, mainly handle journal disk error - Fix bad block handling in choosing raid1 disk from Tomasz Majchrzak - Simplify external metadata array sysfs handling from Artur Paszkiewicz - Optimize raid0 discard handling from me, now raid0 will dispatch large discard IO directly to underlayer disks. * tag 'md/4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: raid1: prefer disk without bad blocks md/r5cache: handle sync with data in write back cache md/r5cache: gracefully handle journal device errors for writeback mode md/raid1/10: avoid unnecessary locking md/raid5-cache: in r5l_do_submit_io(), submit io->split_bio first md/md0: optimize raid0 discard handling md: don't return -EAGAIN in md_allow_write for external metadata arrays md/raid5: make use of spin_lock_irq over local_irq_disable + spin_lock
2017-05-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds10-14/+27
Pull networking fixes from David Miller: 1) Don't allow negative TCP reordering values, from Soheil Hassas Yeganeh. 2) Don't overflow while parsing ipv6 header options, from Craig Gallek. 3) Handle more cleanly the case where an individual route entry during a dump will not fit into the allocated netlink SKB, from David Ahern. 4) Add missing CONFIG_INET dependency for mlx5e, from Arnd Bergmann. 5) Allow neighbour updates to converge more quickly via gratuitous ARPs, from Ihar Hrachyshka. 6) Fix compile error from CONFIG_INET is disabled, from Eric Dumazet. 7) Fix use after free in x25 protocol init, from Lin Zhang. 8) Valid VLAN pvid ranges passed into br_validate(), from Tobias Jungel. 9) NULL out address lists in child sockets in SCTP, this is similar to the fix we made for inet connection sockets last week. From Eric Dumazet. 10) Fix NULL deref in mlxsw driver, from Ido Schimmel. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits) mlxsw: spectrum: Avoid possible NULL pointer dereference sh_eth: Do not print an error message for probe deferral sh_eth: Use platform device for printing before register_netdev() mlxsw: spectrum_router: Fix rif counter freeing routine mlxsw: spectrum_dpipe: Fix incorrect entry index cxgb4: update latest firmware version supported qmi_wwan: add another Lenovo EM74xx device ID sctp: do not inherit ipv6_{mc|ac|fl}_list from parent udp: make *udp*_queue_rcv_skb() functions static bridge: netlink: check vlan_default_pvid range net: ethernet: faraday: To support device tree usage. net: x25: fix one potential use-after-free issue bpf: adjust verifier heuristics ipv6: Check ip6_find_1stfragopt() return value properly. selftests/bpf: fix broken build due to types.h bnxt_en: Check status of firmware DCBX agent before setting DCB_CAP_DCBX_HOST. bnxt_en: Call bnxt_dcb_init() after getting firmware DCBX configuration. net: fix compile error in skb_orphan_partial() ipv6: Prevent overrun when parsing v6 header options neighbour: update neigh timestamps iff update is effective ...
2017-05-18watchdog: wdt_pci: fix build error if define SOFTWARE_REBOOTShile Zhang1-1/+1
To fix following build error when SOFTWARE_REBOOT is defined: CC [M] driver/watchdog/wdt_pci.o driver/watchdog/wdt_pci.c: In function 'wdtpci_interrupt': driver/watchdog/wdt_pci.c:335:3: error: too many arguments to function 'emergency_restart' emergency_restart(NULL); ^ In file included from driver/watchdog/wdt_pci.c:51:0: include/linux/reboot.h:80:13: note: declared here extern void emergency_restart(void); ^ Signed-off-by: Shile Zhang <shile.zhang@nokia.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-18watchdog: cadence_wdt: fix timeout settingTomas Melin1-1/+1
wdt_timeout must not be initialized to CDNS_WDT_DEFAULT_TIMEOUT in order to allow the value to be overriddden by a device tree setting. This way, the default timeout value will be used only in case module_param has not been set, or device tree timeout-sec has not been defined. Signed-off-by: Tomas Melin <tomas.melin@vaisala.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-18watchdog: pcwd_usb: fix NULL-deref at probeJohan Hovold1-0/+3
Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-18watchdog: sama5d4: fix race conditionAlexandre Belloni1-4/+29
WDT_MR and WDT_CR must not updated within three slow clock periods after the last ping (write to WDT_CR or WDT_MR). Ensure enough time has elapsed before writing those registers. wdt_write() waits for 4 periods to ensure at least 3 edges are seen by the IP. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Wenyou.Yang <wenyou.yang@microchip.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-18watchdog: sama5d4: fix WDDIS handlingAlexandre Belloni1-18/+30
The datasheet states: "When setting the WDDIS bit, and while it is set, the fields WDV and WDD must not be modified." Because the whole configuration is already cached inside .mr, wait for the user to enable the watchdog to configure it so it is enabled and configured at the same time (what the IP is actually expecting). When the watchdog is already enabled, it is not an issue to reconfigure it. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Wenyou.Yang <wenyou.yang@microchip.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-18watchdog: orion: fix compile-test dependenciesArnd Bergmann1-1/+1
I ran into one corner case with the orion watchdog using the atomic_io_modify interface: drivers/watchdog/orion_wdt.o: In function `orion_stop': orion_wdt.c:(.text.orion_stop+0x28): undefined reference to `atomic_io_modify' drivers/watchdog/orion_wdt.o: In function `armada375_stop': orion_wdt.c:(.text.armada375_stop+0x28): undefined reference to `atomic_io_modify' This function is available on all 32-bit ARM builds except for ebsa110, so we have to specifically exclude that from compile-testing. Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-18Merge tag 'hwmon-for-linus-v4.12-rc2' of ↵Linus Torvalds1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Fix problem with hotplug state machine in coretemp driver" * tag 'hwmon-for-linus-v4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (coretemp) Handle frozen hotplug state correctly
2017-05-18mlxsw: spectrum: Avoid possible NULL pointer dereferenceIdo Schimmel1-4/+2
In case we got an FDB notification for a port that doesn't exist we execute an FDB entry delete to prevent it from re-appearing the next time we poll for notifications. If the operation failed we would trigger a NULL pointer dereference as 'mlxsw_sp_port' is NULL. Fix it by reporting the error using the underlying bus device instead. Fixes: 12f1501e7511 ("mlxsw: spectrum: remove FDB entry in case we get unknown object notification") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18sh_eth: Do not print an error message for probe deferralGeert Uytterhoeven1-1/+2
EPROBE_DEFER is not an error, hence printing an error message like sh-eth ee700000.ethernet: failed to initialise MDIO may confuse the user. To fix this, suppress the error message in case of probe deferral. While at it, shorten the message, and add the actual error code. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18sh_eth: Use platform device for printing before register_netdev()Geert Uytterhoeven1-1/+1
The MDIO initialization failure message is printed using the network device, before it has been registered, leading to: (null): failed to initialise MDIO Use the platform device instead to fix this: sh-eth ee700000.ethernet: failed to initialise MDIO Fixes: daacf03f0bbfefee ("sh_eth: Register MDIO bus before registering the network device") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18mlxsw: spectrum_router: Fix rif counter freeing routineArkadi Sharshevsky1-0/+3
During rif counter freeing the counter index can be invalid. Add check of validity before freeing the counter. Fixes: e0c0afd8aa4e ("mlxsw: spectrum: Support for counters on router interfaces") Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18mlxsw: spectrum_dpipe: Fix incorrect entry indexArkadi Sharshevsky1-1/+2
In case of disabled counters the entry index will be incorrect. Fix this by moving the entry index set before the counter status check. Fixes: 2ba5999f009d ("mlxsw: spectrum: Add Support for erif table entries access") Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18firmware: Google VPD: Fix memory allocation error handlingChristophe JAILLET1-6/+15
This patch fixes several issues: - if the 1st 'kzalloc' fails, we dereference a NULL pointer - if the 2nd 'kzalloc' fails, there is a memory leak - if 'sysfs_create_bin_file' fails there is also a memory leak Fix it by adding a test after the first memory allocation and some error handling paths to correctly free memory if needed. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-18drm/atmel-hlcdc: Fix output initializationBoris Brezillon1-22/+14
drm_of_find_panel_or_bridge() is expecting np to point to the encoder node, not the bridge or panel this encoder is feeding. Moreover, the endpoint parameter passed to drm_of_find_panel_or_bridge() is always set to zero, which prevents us from probing all outputs. We also move the atmel_hlcdc_rgb_output allocation after the panel/bridge detection to avoid useless allocations. Reported-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Fixes: ebc944613567 ("drm: convert drivers to use drm_of_find_panel_or_bridge") Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1495110921-4032-1-git-send-email-boris.brezillon@free-electrons.com
2017-05-18drivers: char: mem: Check for address space wraparound with mmap()Julius Werner1-0/+5
/dev/mem currently allows mmap() mappings that wrap around the end of the physical address space, which should probably be illegal. It circumvents the existing STRICT_DEVMEM permission check because the loop immediately terminates (as the start address is already higher than the end address). On the x86_64 architecture it will then cause a panic (from the BUG(start >= end) in arch/x86/mm/pat.c:reserve_memtype()). This patch adds an explicit check to make sure offset + size will not wrap around in the physical address type. Signed-off-by: Julius Werner <jwerner@chromium.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-18gpu: host1x: select IOMMU_IOVAArnd Bergmann1-0/+1
When IOMMU_IOVA is not built-in but host1x is, we get a link error: drivers/gpu/host1x/dev.o: In function `host1x_remove': dev.c:(.text.host1x_remove+0x50): undefined reference to `put_iova_domain' drivers/gpu/host1x/dev.o: In function `host1x_probe': dev.c:(.text.host1x_probe+0x31c): undefined reference to `init_iova_domain' dev.c:(.text.host1x_probe+0x38c): undefined reference to `put_iova_domain' drivers/gpu/host1x/cdma.o: In function `host1x_cdma_init': cdma.c:(.text.host1x_cdma_init+0x238): undefined reference to `alloc_iova' cdma.c:(.text.host1x_cdma_init+0x2c0): undefined reference to `__free_iova' drivers/gpu/host1x/cdma.o: In function `host1x_cdma_deinit': cdma.c:(.text.host1x_cdma_deinit+0xb0): undefined reference to `free_iova' This adds the same select statement that we have for drm_tegra. Fixes: 404bfb78daf3 ("gpu: host1x: Add IOMMU support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170419182449.885312-1-arnd@arndb.de
2017-05-18cxgb4: update latest firmware version supportedGanesh Goudar1-3/+3
Change t4fw_version.h to update latest firmware version number to 1.16.43.0. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18qmi_wwan: add another Lenovo EM74xx device IDBjørn Mork1-0/+2
In their infinite wisdom, and never ending quest for end user frustration, Lenovo has decided to use a new USB device ID for the wwan modules in their 2017 laptops. The actual hardware is still the Sierra Wireless EM7455 or EM7430, depending on region. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18net: ethernet: faraday: To support device tree usage.Greentime Hu1-0/+7
To support device tree usage for ftmac100. Signed-off-by: Greentime Hu <green.hu@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18usb: musb: tusb6010_omap: Do not reset the other direction's packet sizePeter Ujfalusi1-4/+9
We have one register for each EP to set the maximum packet size for both TX and RX. If for example an RX programming would happen before the previous TX transfer finishes we would reset the TX packet side. To fix this issue, only modify the TX or RX part of the register. Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-18usb: musb: Fix trying to suspend while active for OTG configurationsTony Lindgren1-4/+5
Commit d8e5f0eca1e8 ("usb: musb: Fix hardirq-safe hardirq-unsafe lock order error") caused a regression where musb keeps trying to enable host mode with no cable connected. This seems to be caused by the fact that now phy is enabled earlier, and we are wrongly trying to force USB host mode on an OTG port. The errors we are getting are "trying to suspend as a_idle while active". For ports configured as OTG, we should not need to do anything to try to force USB host mode on it's OTG port. Trying to force host mode in this case just seems to completely confuse the musb state machine. Let's fix the issue by making musb_host_setup() attempt to force the mode only if port_mode is configured for host mode. Fixes: d8e5f0eca1e8 ("usb: musb: Fix hardirq-safe hardirq-unsafe lock order error") Cc: Johan Hovold <johan@kernel.org> Cc: stable <stable@vger.kernel.org> Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-18usb: host: xhci-plat: propagate return value of platform_get_irq()Thomas Petazzoni1-1/+1
platform_get_irq() returns an error code, but the xhci-plat driver ignores it and always returns -ENODEV. This is not correct, and prevents -EPROBE_DEFER from being propagated properly. CC: <stable@vger.kernel.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-18xhci: Fix command ring stop regression in 4.11Mathias Nyman3-9/+9
In 4.11 TRB completion codes were renamed to match spec. Completion codes for command ring stopped and endpoint stopped were mixed, leading to failures while handling a stopped command ring. Use the correct completion code for command ring stopped events. Fixes: 0b7c105a04ca ("usb: host: xhci: rename completion codes to match spec") Cc: <stable@vger.kernel.org> # 4.11 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-18xhci: remove GFP_DMA flag from allocationMatthias Lange1-1/+1
There is no reason to restrict allocations to the first 16MB ISA DMA addresses. It is causing problems in a virtualization setup with enabled IOMMU (x86_64). The result is that USB is not working in the VM. CC: <stable@vger.kernel.org> Signed-off-by: Matthias Lange <matthias.lange@kernkonzept.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-18USB: xhci: fix lock-inversion problemAlan Stern1-2/+3
With threaded interrupts, bottom-half handlers are called with interrupts enabled. Therefore they can't safely use spin_lock(); they have to use spin_lock_irqsave(). Lockdep warns about a violation occurring in xhci_irq(): ========================================================= [ INFO: possible irq lock inversion dependency detected ] 4.11.0-rc8-dbg+ #1 Not tainted --------------------------------------------------------- swapper/7/0 just changed the state of lock: (&(&ehci->lock)->rlock){-.-...}, at: [<ffffffffa0130a69>] ehci_hrtimer_func+0x29/0xc0 [ehci_hcd] but this lock took another, HARDIRQ-unsafe lock in the past: (hcd_urb_list_lock){+.....} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(hcd_urb_list_lock); local_irq_disable(); lock(&(&ehci->lock)->rlock); lock(hcd_urb_list_lock); <Interrupt> lock(&(&ehci->lock)->rlock); *** DEADLOCK *** no locks held by swapper/7/0. the shortest dependencies between 2nd lock and 1st lock: -> (hcd_urb_list_lock){+.....} ops: 252 { HARDIRQ-ON-W at: __lock_acquire+0x602/0x1280 lock_acquire+0xd5/0x1c0 _raw_spin_lock+0x2f/0x40 usb_hcd_unlink_urb_from_ep+0x1b/0x60 [usbcore] xhci_giveback_urb_in_irq.isra.45+0x70/0x1b0 [xhci_hcd] finish_td.constprop.60+0x1d8/0x2e0 [xhci_hcd] xhci_irq+0xdd6/0x1fa0 [xhci_hcd] usb_hcd_irq+0x26/0x40 [usbcore] irq_forced_thread_fn+0x2f/0x70 irq_thread+0x149/0x1d0 kthread+0x113/0x150 ret_from_fork+0x2e/0x40 This patch fixes the problem. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Bart Van Assche <bart.vanassche@sandisk.com> CC: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-18usb: host: xhci-ring: don't need to clear interrupt pending for MSI enabled hcdPeter Chen2-6/+4
According to xHCI spec Figure 30: Interrupt Throttle Flow Diagram If PCI Message Signaled Interrupts (MSI or MSI-X) are enabled, then the assertion of the Interrupt Pending (IP) flag in Figure 30 generates a PCI Dword write. The IP flag is automatically cleared by the completion of the PCI write. the MSI enabled HCs don't need to clear interrupt pending bit, but hcd->irq = 0 doesn't equal to MSI enabled HCD. At some Dual-role controller software designs, it sets hcd->irq as 0 to avoid HCD requesting interrupt, and they want to decide when to call usb_hcd_irq by software. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-18usb: host: xhci-mem: allocate zeroed Scratchpad BufferPeter Chen1-1/+1
According to xHCI ch4.20 Scratchpad Buffers, the Scratchpad Buffer needs to be zeroed. ... The following operations take place to allocate Scratchpad Buffers to the xHC: ... b. Software clears the Scratchpad Buffer to '0' Cc: stable <stable@vger.kernel.org> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-18xhci: apply PME_STUCK_QUIRK and MISSING_CAS quirk for DenvertonMathias Nyman1-2/+5
Intel Denverton microserver is Atom based and need the PME and CAS quirks as well. Cc: stable <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-18usb: xhci: trace URB before giving it back instead of afterMathias Nyman1-1/+1
Don't access any members of a URB after giving it back. URB might be freed by then already. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-17Merge tag 'for-4.12/dm-fixes-2' of ↵Linus Torvalds8-52/+66
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - a couple DM thin provisioning fixes - a few request-based DM and DM multipath fixes for issues that were made when merging Christoph's changes with Bart's changes for 4.12 - a DM bufio unsigned overflow fix - a couple pure fixes for the DM cache target. - various very small tweaks to the DM cache target that enable considerable speed improvements in the face of continuous IO. Given that the cache target was significantly reworked for 4.12 I see no reason to sit on these advances until 4.13 considering the favorable results associated with such minimalist tweaks. * tag 'for-4.12/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache: handle kmalloc failure allocating background_tracker struct dm bufio: make the parameter "retain_bytes" unsigned long dm mpath: multipath_clone_and_map must not return -EIO dm mpath: don't return -EIO from dm_report_EIO dm rq: add a missing break to map_request dm space map disk: fix some book keeping in the disk space map dm thin metadata: call precommit before saving the roots dm cache policy smq: don't do any writebacks unless IDLE dm cache: simplify the IDLE vs BUSY state calculation dm cache: track all IO to the cache rather than just the origin device's IO dm cache policy smq: stop preemptively demoting blocks dm cache policy smq: put newly promoted entries at the top of the multiqueue dm cache policy smq: be more aggressive about triggering a writeback dm cache policy smq: only demote entries in bottom half of the clean multiqueue dm cache: fix incorrect 'idle_time' reset in IO tracker
2017-05-17Merge branch 'i2c/for-current' of ↵Linus Torvalds4-20/+34
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Here are some bugfixes from I2C, especially removing a wrongly displayed error message for all i2c muxes" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: xgene: Set ACPI_COMPANION_I2C i2c: mv64xxx: don't override deferred probing when getting irq i2c: mux: only print failure message on error i2c: mux: reg: rename label to indicate what it does i2c: mux: reg: put away the parent i2c adapter on probe failure
2017-05-17bnxt_en: Check status of firmware DCBX agent before setting DCB_CAP_DCBX_HOST.Michael Chan1-2/+4
Otherwise, all the host based DCBX settings from lldpad will fail if the firmware DCBX agent is running. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17bnxt_en: Call bnxt_dcb_init() after getting firmware DCBX configuration.Michael Chan1-2/+1
In the current code, bnxt_dcb_init() is called too early before we determine if the firmware DCBX agent is running or not. As a result, we are not setting the DCB_CAP_DCBX_HOST and DCB_CAP_DCBX_LLD_MANAGED flags properly to report to DCBNL. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17of: fdt: add missing allocation-failure checkJohan Hovold1-0/+3
The memory allocator passed to __unflatten_device_tree() (e.g. a wrapped kzalloc) can fail so add the missing sanity check to avoid dereferencing a NULL pointer. Fixes: fe14042358fa ("of/flattree: Refactor unflatten_device_tree and add fdt_unflatten_tree") Cc: stable <stable@vger.kernel.org> # 2.6.38 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2017-05-17USB: serial: qcserial: add more Lenovo EM74xx device IDsBjørn Mork1-0/+2
In their infinite wisdom, and never ending quest for end user frustration, Lenovo has decided to use new USB device IDs for the wwan modules in their 2017 laptops. The actual hardware is still the Sierra Wireless EM7455 or EM7430, depending on region. Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-05-17dm cache: handle kmalloc failure allocating background_tracker structColin Ian King1-0/+5
Currently there is no kmalloc failure check on the allocation of the background_tracker struct in btracker_create(), and so a NULL return will lead to a NULL pointer dereference. Add a NULL check. Detected by CoverityScan, CID#1416587 ("Dereference null return value") Fixes: b29d4986d ("dm cache: significant rework to leverage dm-bio-prison-v2") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Powered by cgit, Gruvboxed by Blaster4385.