aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2013-01-12ASoC: atmel-ssc: add pinctrl selection to driverBo Shen1-0/+8
Add default pinctrl selection to atmel-ssc driver. The pinctrl is mandatory. Signed-off-by: Bo Shen <voice.shen@atmel.com> [nicolas.ferre@atmel.com: split dtsi and driver changes] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-11qlge: remove NETIF_F_TSO6 flagAmerigo Wang1-1/+1
It is werid that qlge driver supports NETIF_F_TSO6 but not NETIF_F_IPV6_CSUM. This also causes some kernel warning [1] when VLAN device setups on a qlge interface. I think the qlge hardware doesn't support NETIF_F_IPV6_CSUM, so we have to just remove the NETIF_F_TSO6 flag. After this patch, the TCP/IPv6 traffic becomes normal again, no kernel warnings any more. NOTE: I only tested it on 2.6.32 kernel, even if the upstream kernel could fix this automatically (it is hard to track NETIF* flags), removing it is also safe. 1. https://bugzilla.redhat.com/show_bug.cgi?id=891839 Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Cc: linux-driver@qlogic.com Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11Merge tag 'hwmon-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull a hwmon patch from Guenter Roeck: "Fix build error in vexpress driver" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (vexpress) Fix build error seen if CONFIG_OF_DEVICE is not set
2013-01-11Merge branch 'akpm' (incoming fixes from Andrew)Linus Torvalds2-3/+3
Merge misc fixes from Andrew Morton: "The audit fixes have been floating around for a while - Al and Eric aren't responding to either myself or Kees so I asked Kees to re-review them and here they are." * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits) lib/rbtree.c: avoid the use of non-static __always_inline MAINTAINERS: Omar had moved mm: compaction: partially revert capture of suitable high-order page linux/audit.h: move ptrace.h include to kernel header kernel/audit.c: avoid negative sleep durations audit: catch possible NULL audit buffers audit: create explicit AUDIT_SECCOMP event type MAINTAINERS: fix a status pattern MAINTAINERS: fix arch/arm/plat-omap/include/plat/omap_hwmod.h mm: thp: acquire the anon_vma rwsem for write during split mm: mmap: annotate vm_lock_anon_vma locking properly for lockdep lockdep, rwsem: provide down_write_nest_lock() arch/mn10300/Kconfig: select CONFIG_GENERIC_ATOMIC64 mm: bootmem: fix free_all_bootmem_core() with odd bitmap alignment mm: use aligned zone start for pfn_to_bitidx calculation fs/exec.c: work around icc miscompilation mm: compaction: fix echo 1 > compact_memory return error issue mm: memblock: fix wrong memmove size in memblock_merge_regions() drivers/video/ssd1307fb.c: fix bit order bug in the byte translation function mm: migrate: check page_count of THP before migrating ...
2013-01-11drivers/video/ssd1307fb.c: fix bit order bug in the byte translation functionMaxime Ripard1-2/+2
This was leading to a strange behaviour when using the fbcon driver on top of this one: the letters were in the right order, but each letter had a vertical symmetry. This was because the addressing was right for the byte, but the addressing of each individual bit was inverted. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Brian Lilly <brian@crystalfontz.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Thomas Petazzoni <thomas@free-electrons.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-11drivers/rtc/rtc-da9055.c: fix cross-section referenceAndrew Morton1-1/+1
Fix the warning WARNING: drivers/rtc/rtc-da9055.o(.text+0xa71): Section mismatch in reference from the function da9055_rtc_probe() to the function .init.text:da9055_rtc_device_init() Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-11cpuidle: fix number of initialized/destroyed statesKrzysztof Mazur1-1/+1
Commit bf4d1b5ddb78f86078ac6ae0415802d5f0c68f92 (cpuidle: support multiple drivers) changed the number of initialized state kobjects in cpuidle_add_state_sysfs() from device->state_count to drv->state_count, but left device->state_count in cpuidle_remove_state_sysfs(). The values of these two fields may be different, in which case a NULL pointer dereference may happen in cpuidle_remove_state_sysfs(), for example. Fix this problem by making cpuidle_add_state_sysfs() use device->state_count too (which restores the original behavior of it). [rjw: Changelog] Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-11USB: hub: handle claim of enabled remote wakeup after resetOliver Neukum1-2/+8
Some touchscreens have buggy firmware which claims remote wakeup to be enabled after a reset. They nevertheless crash if the feature is cleared by the host. Add a check for reset resume before checking for an enabled remote wakeup feature. On compliant devices the feature must be cleared after a reset anyway. Signed-off-by: Oliver Neukum <oneukum@suse.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11USB: cdc-acm: Add support for "PSC Scanning, Magellan 800i"Denis N Ladin1-0/+3
Adding support "PSC Scanning, Magellan 800i" in cdc-acm Very simple, but very necessary. Suitable for all versions of the kernel > 2.6 Signed-off-by: Denis N Ladin <denladin@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11USB: option: add Nexpring NP10T terminal idDzianis Kahanovich1-0/+5
Hyundai Petatel Inc. Nexpring NP10T terminal (EV-DO rev.A USB modem) ID Signed-off-by: Denis Kaganovich <mahatma@eu.by> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11USB: option: add Telekom Speedstick LTE IIBjørn Mork1-0/+3
also known as Alcatel One Touch L100V LTE The driver description files gives these names to the vendor specific functions on this modem: Application1: VID_1BBB&PID_011E&MI_00 Application2: VID_1BBB&PID_011E&MI_01 Modem: VID_1BBB&PID_011E&MI_03 Ethernet: VID_1BBB&PID_011E&MI_04 Reported-by: Thomas Schäfer <tschaefer@t-online.de> Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11USB: option: blacklist network interface on ZTE MF880Bjørn Mork1-1/+2
The driver description files gives these names to the vendor specific functions on this modem: diag: VID_19D2&PID_0284&MI_00 nmea: VID_19D2&PID_0284&MI_01 at: VID_19D2&PID_0284&MI_02 mdm: VID_19D2&PID_0284&MI_03 net: VID_19D2&PID_0284&MI_04 Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11usb: imx21-hcd: Include missing linux/module.hFabio Estevam1-0/+1
Include <linux/module.h>, so that the following errors are fixed: drivers/usb/host/imx21-hcd.c:1929:20: error: expected declaration specifiers or '...' before string constant drivers/usb/host/imx21-hcd.c:1930:15: error: expected declaration specifiers or '...' before string constant drivers/usb/host/imx21-hcd.c:1931:16: error: expected declaration specifiers or '...' before string constant drivers/usb/host/imx21-hcd.c:1932:14: error: expected declaration specifiers or '...' before string constant Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11USB: option: Add new MEDIATEK PID supportQuentin.Li1-0/+7
In option.c, add some new MEDIATEK PIDs support for MEDIATEK new products. This is a MEDIATEK inc. release patch. Signed-off-by: Quentin.Li <snowmanli88@163.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds6-66/+80
Pull intel DRM fixes from Dave Airlie: "Just intel fixes, including getting the Ironlake systems back to the state they were in for 3.6." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: Revert shrinker changes from "Track unbound pages" drm/i915: Use pixel size for computing linear offsets into a sprite drm/i915: Add DEBUG messages to all intel_create_user_framebuffer error paths drm/i915: The sprite scaler on Ironlake also support YUV planes drm: Only evict the blocks required to create the requested hole drm/i915: Treat crtc->mode.clock == 0 as disabled Revert "drm/i915: no lvds quirk for Zotac ZDBOX SD ID12/ID13" drm/i915; Only increment the user-pin-count after successfully pinning the bo
2013-01-11sh: clkfwk: bugfix: sh_clk_div_enable() care sh_clk_div_set_rate() if div6Kuninori Morimoto1-0/+6
764f4e4e33d18cde4dcaf8a0d860b749c6d6d08b (sh: clkfwk: Use shared sh_clk_div_enable/disable()) shared enable/disable funcions for div4/div6. But new sh_clk_div_enable() didn't care sh_clk_div_set_rate() which is required on div6 clock. This patch fixes it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2013-01-10iscsi-target: Fix CmdSN comparison (use cmd->cmd_sn instead of cmd->stat_sn)Roland Dreier1-1/+1
Commit 64c13330a389 ("iscsi-target: Fix bug in handling of ExpStatSN ACK during u32 wrap-around") introduced a bug where we compare the wrong SN against our ExpCmdSN. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-01-10target: Release se_cmd when LUN lookup fails for TMRRoland Dreier1-0/+2
When transport_lookup_tmr_lun() fails and we return a task management response from target_complete_tmr_failure(), we need to call transport_cmd_check_stop_to_fabric() to release the last ref to the cmd after calling se_tfo->queue_tm_rsp(), or else we will never remove the failed TMR from the session command list (and we'll end up waiting forever when trying to tear down the session). (nab: Fix minor compile breakage) Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-01-10target: Fix use-after-free in LUN RESET handlingRoland Dreier1-3/+2
If a backend IO takes a really long then an initiator might abort a command, and then when it gives up on the abort, send a LUN reset too, all before we process any of the original command or the abort. (The abort will wait for the backend IO to complete too) When the backend IO final completes (or fails), the abort handling will proceed and queue up a "return aborted status" operation. Then, while that's still pending, the LUN reset might find the original command still on the LUN's list of commands and try to return aborted status again, which leads to a use-after free when the first se_tfo->queue_status call frees the command and then the second se_tfo->queue_status call runs. Fix this by removing a command from the LUN state_list when we first are about to queue aborted status; we shouldn't do anything LUN-related after we've started returning status, so this seems like the correct thing to do. Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-01-10target: Fix missing CMD_T_ACTIVE bit regression for pending WRITEsRoland Dreier1-0/+1
This patch fixes a regression bug introduced during v3.6.x code with the following commit to drop transport_add_cmd_to_queue(), which originally re-set CMD_T_ACTIVE during pending WRITE I/O submission: commit af8772926f019b7bddd7477b8de5f3b0f12bad21 Author: Christoph Hellwig <hch@infradead.org> Date: Sun Jul 8 15:58:49 2012 -0400 target: replace the processing thread with a TMR work queue The following sequence happens for write commands (or any other commands with a data out phase): - The transport calls target_submit_cmd(), which sets CMD_T_ACTIVE in cmd->transport_state and sets cmd->t_state to TRANSPORT_NEW_CMD. - Things go on transport_generic_new_cmd(), which notices that the command needs to transfer data, so it sets cmd->t_state to TRANSPORT_WRITE_PENDING and calls transport_cmd_check_stop(). - transport_cmd_check_stop() clears CMD_T_ACTIVE in cmd->transport_state and returns in the normal case. - Then we continue on to call ->se_tfo->write_pending(). - The data comes back from the initiator, and the transport calls target_execute_cmd(), which sets cmd->t_state to TRANSPORT_PROCESSING and calls into the backend to actually write the data. At this point, the backend might take a long time to complete the command, since it has to do real IO. If an abort request comes in for this command at this point, it will not wait for the command to finish since CMD_T_ACTIVE is not set. Then when the command does finally finish, we blow up with use-after-free. Avoid this by setting CMD_T_ACTIVE in target_execute_cmd() so that transport_wait_for_tasks() waits for the command to finish executing. This matches the behavior from before commit 1389533ef944 ("target: remove transport_generic_handle_data"), when data was signaled via transport_generic_handle_data(), which set CMD_T_ACTIVE because it called transport_add_cmd_to_queue(). Signed-off-by: Roland Dreier <roland@purestorage.com> Reported-by: Martin Svec <martin.svec@zoner.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-01-10tcm_fc: Do not report target role when target is not definedMark Rustad1-2/+8
Clear the target role when no target is provided for the node performing a PRLI. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Acked by Robert Love <robert.w.love@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-01-10tcm_fc: Do not indicate retry capability to initiatorsMark Rustad1-1/+1
When generating a PRLI response to an initiator, clear the FCP_SPPF_RETRY bit in the response. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Acked by Robert Love <robert.w.love@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-01-10target: Use TCM_NO_SENSE for initialisationHannes Reinecke2-2/+2
The compiler complained about uninitialized variables, so use TCM_NO_SENSE here. Signed-off-by: Hannes Reinecke <hare@suse.de> Cc: Nicholas Bellinger <nab@risingtidesystems.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-01-10target: Introduce TCM_NO_SENSEHannes Reinecke1-0/+10
Introduce TCM_NO_SENSE, mapping to sense code 'Not ready, no additional sense information'. Signed-off-by: Hannes Reinecke <hare@suse.de> Cc: Nicholas Bellinger <nab@risingtidesystems.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-01-10pci: fix iov.c kernel-doc warningsRandy Dunlap1-1/+1
Fix kernel-doc warning in iov.c: Warning(drivers/pci/iov.c:752): No description found for parameter 'numvfs' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Sorry-by: Don Dutile <ddutile@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-10net: ethernet: xilinx: Do not use NO_IRQ in axienetMichal Simek1-1/+1
This driver is used on Microblaze and will be used on Arm Zynq. Microblaze doesn't define NO_IRQ and no IRQ is 0. Arm still uses NO_IRQ as -1 and there is no option to connect IRQ to irq 0. That's why <= 0 is only one option how to find out undefined IRQ. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-10net: ethernet: xilinx: Do not use axienet on PPCMichal Simek1-1/+1
Axi ethernet can't be used on PPC because it is little endian IP and PPC is big endian. This system can't be designed. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-10bnx2x: Allow management traffic after boot from SANBarak Witkowski1-8/+52
As part of the previous driver unload flow, whenever bnx2x is loaded after the UNDI driver it closes all Rx traffic. However, this leads to management traffic also being stopped until the network interface associated with one of its functions gets loaded. To remedy this, management traffic is re-opened once the 'cleaning' after the previous driver ends. Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-10bnx2x: Fix fastpath structures when memory allocation failsYuval Mintz1-2/+28
When allocating Tx queues, if for some reason (e.g., lack of memory) allocation fails, driver will incorrectly calculate the pointers of the various queues. This patch repositions all pointers in such a case to point at sequential structures in memory, allowing the bnx2x macros to be used correctly when accessing them. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-10bfin_mac: Restore hardware time-stamping dependency on BF518Lars-Peter Clausen1-0/+1
Commit 70ac618c07 ("ptp: fixup Kconfig for two PHC drivers.") removed all dependencies for the blackfin hardware time-stamping Kconfig entry. Hardware time-stamping is only available on BF518 though. Since the Kconfig entry is 'default y', just updateing your kernel source and running `make defconfig` will result in the the following build errors: drivers/net/ethernet/adi/bfin_mac.c:694: error: implicit declaration of function ‘bfin_read_EMAC_PTP_CTL’ drivers/net/ethernet/adi/bfin_mac.c:702: error: implicit declaration of function ‘bfin_write_EMAC_PTP_FV3’ drivers/net/ethernet/adi/bfin_mac.c:712: error: implicit declaration of function ‘bfin_write_EMAC_PTP_CTL’ drivers/net/ethernet/adi/bfin_mac.c:717: error: implicit declaration of function ‘bfin_write_EMAC_PTP_FOFF’ ... This patch adds back the dependency on BF518, and since it does not make sense to expose this config option when the blackfin MAC driver is not enabled also restore the dependency on BFIN_MAC. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-10tun: avoid owner checks on IFF_ATTACH_QUEUEMichael S. Tsirkin1-2/+0
At the moment, we check owner when we enable queue in tun. This seems redundant and will break some valid uses where fd is passed around: I think TUNSETOWNER is there to prevent others from attaching to a persistent device not owned by them. Here the fd is already attached, enabling/disabling queue is more like read/write. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-10bnx2x: move debugging code before the returnDan Carpenter1-1/+1
I move the return down a line after the debugging printk. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-10tuntap: refuse to re-attach to different tun_structStefan Hajnoczi1-0/+2
Multiqueue tun devices support detaching a tun_file from its tun_struct and re-attaching at a later point in time. This allows users to disable a specific queue temporarily. ioctl(TUNSETIFF) allows the user to specify the network interface to attach by name. This means the user can attempt to attach to interface "B" after detaching from interface "A". The driver is not designed to support this so check we are re-attaching to the right tun_struct. Failure to do so may lead to oops. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-10radeon/kms: fix dma relocation checkingJerome Glisse1-3/+3
We were checking the index against the size of the relocation buffer instead of against the last index. This fix kernel segfault when userspace submit ill formated command stream/relocation buffer pair. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-10radeon/kms: force rn50 chip to always report connected on analog outputJerome Glisse1-0/+8
Those rn50 chip are often connected to console remoting hw and load detection often fails with those. Just don't try to load detect and report connect. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-01-10drm/radeon: fix error path in kpage allocationIlija Hadzic1-2/+2
Index into chunks[] array doesn't look right. Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-10drm/radeon: fix a bogus kfreeIlija Hadzic1-2/+4
parser->chunks[.].kpage[.] is not always kmalloc-ed by the parser initialization, so parser_fini should not try to kfree it if it didn't allocate it. This patch fixes a kernel oops that can be provoked in UMS mode. Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-10drm/radeon: fix NULL pointer dereference in UMS modeIlija Hadzic1-2/+3
In UMS mode parser->rdev is NULL, so dereferencing will cause an oops. Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-11Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intelDave Airlie6-66/+80
Daniel writes: "Pretty much all just major fixes: - 2 pieces of duct-tape for the ilk bug. - Sprite regression fixes from Chris. - OOPS fix for a div-by-zero from Chris, regression due to the modeset rework in 3.7, now brought to light by a benign change in 3.8. - Fix interrupted bo pinning, used to work around CS coherency issues on i830/i845 (kernel also has a w/a newly in 3.8, but pinning is more efficient if possible)."
2013-01-10Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds4-45/+59
Pull x86 platform driver bugfixes from Matthew Garrett. * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: asus-laptop: Fix potential invalid pointer dereference Update MAINTAINERS entry asus-laptop: Do not call HWRS on init sony-laptop: fix SNC buffer calls when SN06 returns Integers samsung-laptop: Add quirk for broken acpi_video backlight on N250P acer-wmi: add Aspire 5741G touchpad toggle key acer-wmi: change to emit touchpad on off key acer-wmi: fix obj is NULL but dereferenced MAINTAINERS: change the mail address of acer-wmi/msi-laptop maintainer
2013-01-10drm/i915: Revert shrinker changes from "Track unbound pages"Daniel Vetter1-4/+14
This partially reverts commit 6c085a728cf000ac1865d66f8c9b52935558b328 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon Aug 20 11:40:46 2012 +0200 drm/i915: Track unbound pages Closer inspection of that patch revealed a bunch of unrelated changes in the shrinker: - The shrinker count is now in pages instead of objects. - For counting the shrinkable objects the old code only looked at the inactive list, the new code looks at all bounds objects (including pinned ones). That is obviously in addition to the new unbound list. - The shrinker cound is no longer scaled with sysctl_vfs_cache_pressure. Note though that with the default tuning value of vfs_cache_pressue = 100 this doesn't affect the shrinker behaviour. - When actually shrinking objects, the old code first dropped purgeable objects, then normal (inactive) objects. Only then did it, in a last-ditch effort idle the gpu and evict everything. The new code omits the intermediate step of evicting normal inactive objects. Safe for the first change, which seems benign, and the shrinker count scaling, which is a bit a different story, the endresult of all these changes is that the shrinker is _much_ more likely to fall back to the last-ditch resort of idling the gpu and evicting everything. The old code could only do that if something else evicted lots of objects meanwhile (since without any other changes the nr_to_scan will be smaller than the object count). Reverting the vfs_cache_pressure behaviour itself is a bit bogus: Only dentry/inode object caches should scale their shrinker counts with vfs_cache_pressure. Originally I've had that change reverted, too. But Chris Wilson insisted that it's too bogus and shouldn't again see the light of day. Hence revert all these other changes and restore the old shrinker behaviour, with the minor adjustment that we now first scan the unbound list, then the inactive list for each object category (purgeable or normal). A similar patch has been tested by a few people affected by the gen4/5 hangs which started to appear in 3.7, which some people bisected to the "drm/i915: Track unbound pages" commit. But just disabling the unbound logic alone didn't change things at all. Note that this patch doesn't fix the referenced bugs, it only hides the underlying bug(s) well enough to restore pre-3.7 behaviour. The key to achieve that is to massively reduce the likelyhood of going into a full gpu stall and evicting everything. v2: Reword commit message a bit, taking Chris Wilson's comment into account. v3: On Chris Wilson's insistency, do not reinstate the rather bogus vfs_cache_pressure change. Tested-by: Greg KH <gregkh@linuxfoundation.org> Tested-by: Dave Kleikamp <dave.kleikamp@oracle.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=55984 References: https://bugs.freedesktop.org/show_bug.cgi?id=57122 References: https://bugs.freedesktop.org/show_bug.cgi?id=56916 References: https://bugs.freedesktop.org/show_bug.cgi?id=57136 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-10Merge branch 'for-linus' of ↵Linus Torvalds20-33/+36
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 patches from Martin Schwidefsky: "Add the finit_module system call, fix the irq statistics in /proc/stat, fix a s390dbf lockdep problem, a patch revert for a problem that is not 100% understood yet, and a few patches to fix warnings." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: define read*_relaxed functions s390/topology: export cpu_topology s390/pm: export pm_power_off s390/pci: define isa_dma_bridge_buggy s390/3215: partially revert tty close handling fix s390/irq: count cpu restart events s390/irq: remove split irq fields from /proc/stat s390/irq: enable irq sum accounting for /proc/stat again s390/syscalls: wire up finit_module syscall s390/pci: remove dead code s390/smp: fix section mismatch for smp_add_present_cpu() s390/debug: Fix s390dbf lockdep problem in debug_(un)register_view()
2013-01-10regulator: max8998: Ensure enough delay time for ↵Axel Lin1-1/+1
max8998_set_voltage_buck_time_sel Use DIV_ROUND_UP to prevent truncation by integer division issue. This ensures we return enough delay time. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2013-01-09hwmon: (vexpress) Fix build error seen if CONFIG_OF_DEVICE is not setGuenter Roeck1-0/+1
Fix: vexpress.c: In function ‘vexpress_hwmon_name_show’: vexpress.c:34:2: error: implicit declaration of function ‘of_get_property’ [-Werror=implicit-function-declaration] vexpress.c:34:27: warning: initialization makes pointer from integer without a cast [enabled by default] vexpress.c: In function ‘vexpress_hwmon_label_show’: vexpress.c:43:22: warning: initialization makes pointer from integer without a cast [enabled by default] Seen if CONFIG_OF_DEVICE is not defined. of_get_property is declared in of.h which is only included by of_device.h if CONFIG_OF_DEVICE is defined. of.h needs to be included directly. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-01-09Merge tag 'edac_fixes_for_3.8' of ↵Linus Torvalds2-18/+9
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp Pull EDAC fixes from Borislav Petkov: "Two error path fixes causing a crash and a Kconfig fix for an issue which spilled all EDAC suboptions into the 'Device Drivers' menu." * tag 'edac_fixes_for_3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC: Cleanup device deregistering path EDAC: Fix EDAC Kconfig menu EDAC: Fix kernel panic on module unloading
2013-01-09Merge branch 'master' of ↵John W. Linville27-39/+6278
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-01-09drm/i915: Use pixel size for computing linear offsets into a spriteChris Wilson1-6/+4
This fixes an original bug in the sprite code that miscomputed the source offset into a linear YUV packed framebuffer, that was magnified into an oops with commit 5a35e99e8162d6820013a56ad15ea8bf937af5a6 Author: Damien Lespiau <damien.lespiau@intel.com> Date: Fri Oct 26 18:20:12 2012 +0100 drm/i915: adjust sprite base address Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.com> Cc: Damien Lespiau <damien.lespiau@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-08Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds5-25/+29
Pull ARM SoC fixes from Olof Johansson: "People are back from the holiday breaks, and it shows. Here are a bunch of fixes for a number of platforms: - A couple of small fixes for Nomadik - A larger set of changes for kirkwood/mvebu - uart driver selection, dt clocks, gpio-poweroff fixups, a few __init annotation fixes and some error handling improvement in their xor dma driver. - i.MX had a couple of minor fixes (and a critical one for flexcan2 clock setup) - MXS has a small board fix and a framebuffer bugfix - A set of fixes for Samsung Exynos, fixing default bootargs and some Exynos5440 clock issues - A set of OMAP changes including PM fixes and a few sparse warning fixups All in all a bit more positive code delta than we'd ideally want to see here, mostly from the OMAP PM changes, but nothing overly crazy." * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits) ARM: clps711x: Fix bad merge of clockevents setup ARM: highbank: save and restore L2 cache and GIC on suspend ARM: highbank: add a power request clear ARM: highbank: fix secondary boot and hotplug ARM: highbank: fix typos with hignbank in power request functions ARM: dts: fix highbank cpu mpidr values ARM: dts: add device_type prop to cpu nodes on Calxeda platforms ARM: mx5: Fix MX53 flexcan2 clock ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array pinctrl: mvebu: make pdma clock on dove mandatory ARM: Dove: Add pinctrl clock to DT dma: mv_xor: fix error handling for clocks dma: mv_xor: fix error handling of mv_xor_channel_add() arm: mvebu: Add missing ; for cpu node. arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces arm: mvebu: Armada XP MV78230 has two cores, not one clk: mvebu: Remove inappropriate __init tagging ARM: Kirkwood: Use fixed-regulator instead of board gpio call ARM: Kirkwood: Fix missing sdio clock ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers ...
2013-01-08Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds46-792/+437
Pull drm update from Dave Airlie: "Exynos and Radeon mostly, with a dma-buf and ttm fix thrown in. It's a bit big but its mostly exynos license fix ups and I'd rather not hold those up since its legally stuff. Radeon has a couple of fixes from dma engine work, TTM is just a locking fix, and dma-buf fix has been hanging around and I finally got a chance to review it." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (30 commits) drm/ttm: fix fence locking in ttm_buffer_object_transfer drm/prime: drop reference on imported dma-buf come from gem drm/radeon: add quirk for d3 delay during switcheroo poweron for apple macbooks drm/exynos: move finish page flip to a common place drm/exynos: fimd: modify condition in fimd resume drm/radeon: fix DMA CS parser for r6xx linear copy packet drm/radeon: split r6xx and r7xx copy_dma functions drm/exynos: Use devm_clk_get in exynos_drm_gsc.c drm/exynos: Remove redundant NULL check in exynos_drm_gsc.c drm/exynos: Remove explicit freeing using devm_* APIs in exynos_drm_gsc.c drm/exynos: Use devm_clk_get in exynos_drm_rotator.c drm/exynos: Remove redundant NULL check in exynos_drm_rotator.c drm/exynos: Remove unnecessary devm_* freeing APIs in exynos_drm_rotator.c drm/exynos: Use devm_clk_get in exynos_drm_fimc.c drm/exynos: Remove redundant NULL check drm/exynos: Remove explicit freeing using devm_* APIs in exynos_drm_fimc.c drm/exynos: Use devm_kzalloc in exynos_drm_ipp.c drm/exynos: fix gem buffer allocation type checking drm/exynos: remove needless parenthesis. drm/exynos: fix incorrect interrupt induced by m2m operation. ...
2013-01-08target: use correct sense code for LUN communication failureHannes Reinecke1-1/+1
The ASC/ASCQ code for 'Logical Unit Communication failure' is 0x08/0x00; 0x80/0x00 is vendor specific. Signed-off-by: Hannes Reinecke <hare@suse.de> Cc: Nicholas Bellinger <nab@risingtidesystems.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Powered by cgit, Gruvboxed by Blaster4385.