| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There is an null pointer check order issue here: if we have to
check !desc and !desc->name anyway, check it before dereferencing it in
pr_warn().
Signed-off-by: qinyu <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
|
|
Pull rdma updates from Jason Gunthorpe:
"Quite a small cycle this time, even with the rc8. I suppose everyone
went to sleep over xmas.
- Minor driver updates for hfi1, cxgb4, erdma, hns, irdma, mlx5, siw,
mana
- inline CQE support for hns
- Have mlx5 display device error codes
- Pinned DMABUF support for irdma
- Continued rxe cleanups, particularly converting the MRs to use
xarray
- Improvements to what can be cached in the mlx5 mkey cache"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (61 commits)
IB/mlx5: Extend debug control for CC parameters
IB/hfi1: Fix sdma.h tx->num_descs off-by-one errors
IB/hfi1: Fix math bugs in hfi1_can_pin_pages()
RDMA/irdma: Add support for dmabuf pin memory regions
RDMA/mlx5: Use query_special_contexts for mkeys
net/mlx5e: Use query_special_contexts for mkeys
net/mlx5: Change define name for 0x100 lkey value
net/mlx5: Expose bits for querying special mkeys
RDMA/rxe: Fix missing memory barriers in rxe_queue.h
RDMA/mana_ib: Fix a bug when the PF indicates more entries for registering memory on first packet
RDMA/rxe: Remove rxe_alloc()
RDMA/cma: Distinguish between sockaddr_in and sockaddr_in6 by size
Subject: RDMA/rxe: Handle zero length rdma
iw_cxgb4: Fix potential NULL dereference in c4iw_fill_res_cm_id_entry()
RDMA/mlx5: Use rdma_umem_for_each_dma_block()
RDMA/umem: Remove unused 'work' member from struct ib_umem
RDMA/irdma: Cap MSIX used to online CPUs + 1
RDMA/mlx5: Check reg_create() create for errors
RDMA/restrack: Correct spelling
RDMA/cxgb4: Fix potential null-ptr-deref in pass_establish()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Some polishing and small fixes for iommufd:
- Remove IOMMU_CAP_INTR_REMAP, instead rely on the interrupt
subsystem
- Use GFP_KERNEL_ACCOUNT inside the iommu_domains
- Support VFIO_NOIOMMU mode with iommufd
- Various typos
- A list corruption bug if HWPTs are used for attach"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Do not add the same hwpt to the ioas->hwpt_list twice
iommufd: Make sure to zero vfio_iommu_type1_info before copying to user
vfio: Support VFIO_NOIOMMU with iommufd
iommufd: Add three missing structures in ucmd_buffer
selftests: iommu: Fix test_cmd_destroy_access() call in user_copy
iommu: Remove IOMMU_CAP_INTR_REMAP
irq/s390: Add arch_is_isolated_msi() for s390
iommu/x86: Replace IOMMU_CAP_INTR_REMAP with IRQ_DOMAIN_FLAG_ISOLATED_MSI
genirq/msi: Rename IRQ_DOMAIN_MSI_REMAP to IRQ_DOMAIN_ISOLATED_MSI
genirq/irqdomain: Remove unused irq_domain_check_msi_remap() code
iommufd: Convert to msi_device_has_isolated_msi()
vfio/type1: Convert to iommu_group_has_isolated_msi()
iommu: Add iommu_group_has_isolated_msi()
genirq/msi: Add msi_device_has_isolated_msi()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Consolidate iommu_map/unmap functions.
There have been blocking and atomic variants so far, but that was
problematic as this approach does not scale with required new
variants which just differ in the GFP flags used. So Jason
consolidated this back into single functions that take a GFP
parameter.
- Retire the detach_dev() call-back in iommu_ops
- Arm SMMU updates from Will:
- Device-tree binding updates:
- Cater for three power domains on SM6375
- Document existing compatible strings for Qualcomm SoCs
- Tighten up clocks description for platform-specific
compatible strings
- Enable Qualcomm workarounds for some additional platforms that
need them
- Intel VT-d updates from Lu Baolu:
- Add Intel IOMMU performance monitoring support
- Set No Execute Enable bit in PASID table entry
- Two performance optimizations
- Fix PASID directory pointer coherency
- Fix missed rollbacks in error path
- Cleanups
- Apple t8110 DART support
- Exynos IOMMU:
- Implement better fault handling
- Error handling fixes
- Renesas IPMMU:
- Add device tree bindings for r8a779g0
- AMD IOMMU:
- Various fixes for handling on SNP-enabled systems and
handling of faults with unknown request-ids
- Cleanups and other small fixes
- Various other smaller fixes and cleanups
* tag 'iommu-updates-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (71 commits)
iommu/amd: Skip attach device domain is same as new domain
iommu: Attach device group to old domain in error path
iommu/vt-d: Allow to use flush-queue when first level is default
iommu/vt-d: Fix PASID directory pointer coherency
iommu/vt-d: Avoid superfluous IOTLB tracking in lazy mode
iommu/vt-d: Fix error handling in sva enable/disable paths
iommu/amd: Improve page fault error reporting
iommu/amd: Do not identity map v2 capable device when snp is enabled
iommu: Fix error unwind in iommu_group_alloc()
iommu/of: mark an unused function as __maybe_unused
iommu: dart: DART_T8110_ERROR range should be 0 to 5
iommu/vt-d: Enable IOMMU perfmon support
iommu/vt-d: Add IOMMU perfmon overflow handler support
iommu/vt-d: Support cpumask for IOMMU perfmon
iommu/vt-d: Add IOMMU perfmon support
iommu/vt-d: Support Enhanced Command Interface
iommu/vt-d: Retrieve IOMMU perfmon capability information
iommu/vt-d: Support size of the register set in DRHD
iommu/vt-d: Set No Execute Enable bit in PASID table entry
iommu/vt-d: Remove sva from intel_svm_dev
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add node lifecycle unit tests
- Add of_property_present() helper aligned with fwnode API
- Print more information on reserved regions on boot
- Update dtc to upstream v1.6.1-66-gabbd523bae6e
- Use strscpy() to instead of strncpy() in DT core
- Add option for schema validation on %.dtb targets
Bindings:
- Add/fix support for listing multiple patterns in DT_SCHEMA_FILES
- Rework external memory controller/bus bindings to properly support
controller specific child node properties
- Convert loongson,ls1x-intc, fcs,fusb302, sil,sii8620, Rockchip
RK3399 PCIe, Synquacer I2C, and Synquacer EXIU bindings to DT
schema format
- Add RiscV SBI PMU event mapping binding
- Add missing contraints on Arm SCMI child node allowed properties
- Add a bunch of missing Socionext UniPhier glue block bindings and
example fixes
- Various fixes for duplicate or conflicting type definitions on DT
properties"
* tag 'devicetree-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (66 commits)
dt-bindings: regulator: Add mps,mpq7932 power-management IC
of: dynamic: Fix spelling mistake "kojbect" -> "kobject"
dt-bindings: drop Sagar Kadam from SiFive binding maintainership
dt-bindings: sram: qcom,imem: document sm8450
dt-bindings: interrupt-controller: convert loongson,ls1x-intc.txt to json-schema
dt-bindings: arm: Add Cortex-A715 and X3
of: dynamic: add lifecycle docbook info to node creation functions
of: add consistency check to of_node_release()
of: do not use "%pOF" printk format on node with refcount of zero
of: unittest: add node lifecycle tests
of: update kconfig unittest help
of: add processing of EXPECT_NOT to of_unittest_expect
of: prepare to add processing of EXPECT_NOT to of_unittest_expect
of: Use preferred of_property_read_* functions
of: Use of_property_present() helper
of: Add of_property_present() helper
of: reserved_mem: Use proper binary prefix
dt-bindings: Fix multi pattern support in DT_SCHEMA_FILES
of: reserved-mem: print out reserved-mem details during boot
dt-bindings: serial: restrict possible child node names
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work
falls into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be
moved into read-only memory (i.e. const) The recent work with Rust
has pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only
making things safer overall. This is the contuation of that work
(started last release with kobject changes) in moving struct
bus_type to be constant. We didn't quite make it for this release,
but the remaining patches will be finished up for the release after
this one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems"
[ Geert Uytterhoeven points out that that last sentence isn't true, and
that there's a pending report that has a fix that is queued up - Linus ]
* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
OPP: fix error checking in opp_migrate_dentry()
debugfs: update comment of debugfs_rename()
i3c: fix device.h kernel-doc warnings
dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
Revert "driver core: add error handling for devtmpfs_create_node()"
Revert "devtmpfs: add debug info to handle()"
Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
driver core: cpu: don't hand-override the uevent bus_type callback.
devtmpfs: remove return value of devtmpfs_delete_node()
devtmpfs: add debug info to handle()
driver core: add error handling for devtmpfs_create_node()
driver core: bus: update my copyright notice
driver core: bus: add bus_get_dev_root() function
driver core: bus: constify bus_unregister()
driver core: bus: constify some internal functions
driver core: bus: constify bus_get_kset()
driver core: bus: constify bus_register/unregister_notifier()
driver core: remove private pointer from struct bus_type
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the large set of driver changes for char/misc drivers and
other smaller driver subsystems that flow through this git tree.
Included in here are:
- New IIO drivers and features and improvments in that subsystem
- New hwtracing drivers and additions to that subsystem
- lots of interconnect changes and new drivers as that subsystem
seems under very active development recently. This required also
merging in the icc subsystem changes through this tree.
- FPGA driver updates
- counter subsystem and driver updates
- MHI driver updates
- nvmem driver updates
- documentation updates
- Other smaller driver updates and fixes, full details in the
shortlog
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (223 commits)
scripts/tags.sh: fix incompatibility with PCRE2
firmware: coreboot: Remove GOOGLE_COREBOOT_TABLE_ACPI/OF Kconfig entries
mei: lower the log level for non-fatal failed messages
mei: bus: disallow driver match while dismantling device
misc: vmw_balloon: fix memory leak with using debugfs_lookup()
nvmem: stm32: fix OPTEE dependency
dt-bindings: nvmem: qfprom: add IPQ8074 compatible
nvmem: qcom-spmi-sdam: register at device init time
nvmem: rave-sp-eeprm: fix kernel-doc bad line warning
nvmem: stm32: detect bsec pta presence for STM32MP15x
nvmem: stm32: add OP-TEE support for STM32MP13x
nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of()
nvmem: core: add nvmem_add_one_cell()
nvmem: core: drop the removal of the cells in nvmem_add_cells()
nvmem: core: move struct nvmem_cell_info to nvmem-provider.h
nvmem: core: add an index parameter to the cell
of: property: add #nvmem-cell-cells property
of: property: make #.*-cells optional for simple props
of: base: add of_parse_phandle_with_optional_args()
net: add helper eth_addr_add()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the "boring" staging driver update for 6.3-rc1.
Nothing major in here at all, it's just lots of tiny code cleanups to
bring some of the staging drivers more in line with the real portion
of the kernel (apis and coding style.) Overall we remove more lines of
code than we add, always a nice result.
The big work was done by Martin Kaiser and Philipp Hortmann, both
tackling some of the older wifi drivers, removing unused code and
structures and a file in one case.
Full details of the changes are in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (219 commits)
staging: r8188eu: Revert "staging: r8188eu: simplify rtw_get_ff_hwaddr"
staging: r8188eu: replace hand coded loop with list_for_each_entry
staging: r8188eu: merge _rtw_enqueue_cmd into its caller
most: add maintainer entry
staging: rtl8192e: Use BIT() instead of << for bit field MSR_LINK_MASK
staging: rtl8192e: Rename DM_RxPathSelTable
staging: rtl8192e: Rename diff_TH and disabledRF
staging: rtl8192e: Rename Enable, cck_Rx_path and SS_TH_low
staging: rtl8192e: Rename RateAdaptiveTH.., VeryLowRSSI and WAIotTHVal
staging: rtl8192e: Rename RxPathSelectio.., RateAdaptive.. and RateAdap..
staging: rtl8192e: Rename OFDM_Table.., CCK_Table_.. and RxPathSelecti..
staging: rtl8192e: Rename MacBlkCtrl and remove double definition
staging: rtl8192e: Remove blank lines in r8192E_hw.h, rtl_core.h and ..
staging: rtl8192e: Rename AcmHw_ViqEn, AcmHw_VoqEn and ANAPAR_FOR_8192PciE
staging: r8188eu: bagg_pkt parameter is not used
staging: r8188eu: simplify rtw_get_ff_hwaddr
staging: r8188eu: simplify xmit_buf flags
staging: r8188eu: xmit_buf's ff_hwaddr is not used
staging: r8188eu: remove unused frametag defines
staging: r8188eu: simplify rtw_alloc_xmitframe
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of serial and tty driver updates for 6.3-rc1.
Once again, Jiri and Ilpo have done a number of core vt and tty/serial
layer cleanups that were much needed and appreciated. Other than that,
it's just a bunch of little tty/serial driver updates:
- qcom-geni-serial driver updates
- liteuart driver updates
- hvcs driver cleanups
- n_gsm updates and additions for new features
- more 8250 device support added
- fpga/dfl update and additions
- imx serial driver updates
- fsl_lpuart updates
- other tiny fixes and updates for serial drivers
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (143 commits)
tty: n_gsm: add keep alive support
serial: imx: remove a redundant check
dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties
soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h
tty: n_gsm: add TIOCMIWAIT support
tty: n_gsm: add RING/CD control support
tty: n_gsm: mark unusable ioctl structure fields accordingly
serial: imx: get rid of registers shadowing
serial: imx: refine local variables in rxint()
serial: imx: stop using USR2 in FIFO reading loop
serial: imx: remove redundant USR2 read from FIFO reading loop
serial: imx: do not break from FIFO reading loop prematurely
serial: imx: do not sysrq broken chars
serial: imx: work-around for hardware RX flood
serial: imx: factor-out common code to imx_uart_soft_reset()
serial: 8250_pci1xxxx: Add power management functions to quad-uart driver
serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver
serial: 8250_pci1xxxx: Add driver for quad-uart support
serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c
tty: pcn_uart: fix memory leak with using debugfs_lookup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1.
Nothing major in here, just lots of good development, including:
- Thunderbolt additions for new device support and features
- xhci driver updates and cleanups
- USB gadget media driver updates (includes media core changes that
were acked by the v4l2 maintainers)
- lots of other USB gadget driver updates for new features
- dwc3 driver updates and fixes
- minor debugfs leak fixes
- typec driver updates and additions
- dt-bindings conversions to yaml
- other small bugfixes and driver updates
All have been in linux-next for a while with no reported issues"
* tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (237 commits)
usb: dwc3: xilinx: Remove unused of_gpio,h
usb: typec: pd: Add higher capability sysfs for sink PDO
usb: typec: pd: Remove usb_suspend_supported sysfs from sink PDO
usb: dwc3: pci: add support for the Intel Meteor Lake-M
usb: gadget: u_ether: Don't warn in gether_setup_name_default()
usb: gadget: u_ether: Convert prints to device prints
usb: gadget: u_serial: Add null pointer check in gserial_resume
usb: gadget: uvc: fix missing mutex_unlock() if kstrtou8() fails
xhci: host: potential NULL dereference in xhci_generic_plat_probe()
dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: make G12A usb3-phy0 optional
usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev
of: device: Do not ignore error code in of_device_uevent_modalias
of: device: Ignore modalias of reused nodes
usb: gadget: configfs: Fix set but not used variable warning
usb: gadget: uvc: Use custom strings if available
usb: gadget: uvc: Allow linking function to string descs
usb: gadget: uvc: Pick up custom string descriptor IDs
usb: gadget: uvc: Allow linking XUs to string descriptors
usb: gadget: configfs: Attach arbitrary strings to cdev
usb: gadget: configfs: Support arbitrary string descriptors
...
|
|
On success, mlx5_geneve_tlv_option_create returns non negative
Geneve object id. In case the object id is positive value the
caller functions will handle it as an error (non zero) and
will fail to offload the Geneve rule.
Fix this by changing caller function ,mlx5_geneve_tlv_option_add,
to return 0 in case valid non negative object id was provided.
Fixes: 0ccc171ea6a2 ("net/mlx5: Geneve, Manage Geneve TLV options")
Signed-off-by: Maor Dickman <[email protected]>
Reviewed-by: Raed Salem <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
When adding send to vport rule verify flow_source matching is
supported by checking the flow_source cap.
Fixes: d04442540372 ("net/mlx5: E-Switch, set flow source for send to uplink rule")
Signed-off-by: Roi Dayan <[email protected]>
Reviewed-by: Maor Dickman <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Currently, during the early stages of their unloading, particularly
during SRIOV disablement, PFs/ECPFs wait on the release of all of
their VFs memory pages. Furthermore, ECPFs are considered the page
supplier for host VFs, hence the host VFs memory pages are freed only
during ECPF cleanup when host interfaces get disabled.
Thus, disabling SRIOV early in unload timeline causes the DPU ECPF
to stall on driver unload while waiting on the release of host VF pages
that won't be freed before host interfaces get disabled later on.
Therefore, for ECPFs, wait on the release of VFs pages only after the
disablement of host PFs during ECPF cleanup flow. Then, host PFs and VFs
are disabled and their memory shall be freed accordingly.
Fixes: 143a41d7623d ("net/mlx5: Disable SRIOV before PF removal")
Signed-off-by: Maher Sanalla <[email protected]>
Reviewed-by: Moshe Shemesh <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Fifo indexes are not checked during pop operations and it leads to
potential use-after-free when poping from empty queue. Such case was
possible during re-sync action. WARN_ON_ONCE covers future cases.
There were out-of-order cqe spotted which lead to drain of the queue and
use-after-free because of lack of fifo pointers check. Special check and
counter are added to avoid resync operation if SKB could not exist in the
fifo because of OOO cqe (skb_id must be between consumer and producer
index).
Fixes: 58a518948f60 ("net/mlx5e: Add resiliency for PTP TX port timestamp")
Signed-off-by: Vadim Fedorenko <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
During ptp resync operation SKBs were poped from the fifo but were never
freed neither by napi_consume nor by dev_kfree_skb_any. Add call to
napi_consume_skb to properly free SKBs.
Another leak was happening because mlx5e_skb_fifo_has_room() had an error
in the check. Comparing free running counters works well unless C promotes
the types to something wider than the counter. In this case counters are
u16 but the result of the substraction is promouted to int and it causes
wrong result (negative value) of the check when producer have already
overlapped but consumer haven't yet. Explicit cast to u16 fixes the issue.
Fixes: 58a518948f60 ("net/mlx5e: Add resiliency for PTP TX port timestamp")
Reviewed-by: Gal Pressman <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Vadim Fedorenko <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
kvzalloc() returns NULL pointer not PTR_ERR() when it fails,
so replace the IS_ERR() check with NULL pointer check.
Fixes: d13674b1d14c ("net/mlx5e: TC, map tc action cookie to a hw counter")
Signed-off-by: Yang Yingliang <[email protected]>
Reviewed-by: Roi Dayan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
The call netdev_{put, hold} of dev_{put, hold} will check NULL,
so there is no need to check before using dev_{put, hold},
remove it to silence the warning：
./drivers/net/ethernet/mellanox/mlx5/core/en/rep/tc.c:714:2-9: WARNING: NULL check before dev_{put, hold} functions is not needed.
Reported-by: Abaci Robot <[email protected]>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4174
Signed-off-by: Yang Li <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Check for non dma transfers that do not fit in FIFO has issue and skips
combined sequence for Tegra234 & Tegra241 which does not have GPCDMA.
Fixes: 1b8342cc4a38 ("spi: tegra210-quad: combined sequence mode")
Signed-off-by: Krishna Yarlagadda <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"There is no particular theme here - mainly quick hits all over the
tree.
Most notable is a set of zlib changes from Mikhail Zaslonko which
enhances and fixes zlib's use of S390 hardware support: 'lib/zlib: Set
of s390 DFLTCC related patches for kernel zlib'"
* tag 'mm-nonmm-stable-2023-02-20-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (55 commits)
Update CREDITS file entry for Jesper Juhl
sparc: allow PM configs for sparc32 COMPILE_TEST
hung_task: print message when hung_task_warnings gets down to zero.
arch/Kconfig: fix indentation
scripts/tags.sh: fix the Kconfig tags generation when using latest ctags
nilfs2: prevent WARNING in nilfs_dat_commit_end()
lib/zlib: remove redundation assignement of avail_in dfltcc_gdht()
lib/Kconfig.debug: do not enable DEBUG_PREEMPT by default
lib/zlib: DFLTCC always switch to software inflate for Z_PACKET_FLUSH option
lib/zlib: DFLTCC support inflate with small window
lib/zlib: Split deflate and inflate states for DFLTCC
lib/zlib: DFLTCC not writing header bits when avail_out == 0
lib/zlib: fix DFLTCC ignoring flush modes when avail_in == 0
lib/zlib: fix DFLTCC not flushing EOBS when creating raw streams
lib/zlib: implement switching between DFLTCC and software
lib/zlib: adjust offset calculation for dfltcc_state
nilfs2: replace WARN_ONs for invalid DAT metadata block requests
scripts/spelling.txt: add "exsits" pattern and fix typo instances
fs: gracefully handle ->get_block not mapping bh in __mpage_writepage
cramfs: Kconfig: fix spelling & punctuation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
|
|
Per the discussion in [1], hairpin parameters will be exposed using
devlink, remove the debugfs files.
[1] https://lore.kernel.org/all/[email protected]/
Signed-off-by: Gal Pressman <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Fix the typo/copy-paste error by replacing struct variable ah_esp_mask name
by ah_esp_hdr.
Issue identified using doublebitand.cocci Coccinelle semantic patch.
Fixes: b7cf966126eb ("octeontx2-pf: Add flow classification using IP next level protocol")
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Deepak R Varma <[email protected]>
Link: https://lore.kernel.org/r/Y/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Removed Drivers:
- HTC ASIC3 LED
New Functionality:
- Provide generic led_get() which can be used by both DT and !DT
platforms
Fix-ups:
- Convert a bunch of I2C subsystem users to the new probing API
- Explicitly provide missing include files
- Make use of led_init_default_state_get() and rid the custom
variants
- Use simplified fwnode_device_is_compatible() API
- Provide some Device Tree additions / adaptions
- Fix some trivial spelling issues
Bug Fixes:
- Prevent device refcount leak during led_put() and of_led_get()
- Clear previous data from temporary led_pwm structure before
processing next child
- Fix Clang's warning about incompatible function types when using
devm_add_action*()"
* tag 'leds-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (41 commits)
leds: Remove ide-disk trigger
dt-bindings: leds: Add disk write/read and usb-host/usb-gadget
Documentation: leds: Correct spelling
dt-bindings: leds: Document Bluetooth and WLAN triggers
leds: Remove asic3 driver
leds: simatic-ipc-leds-gpio: Make sure we have the GPIO providing driver
leds: tca6507: Convert to use fwnode_device_is_compatible()
leds: syscon: Get rid of custom led_init_default_state_get()
leds: pm8058: Get rid of custom led_init_default_state_get()
leds: pca955x: Get rid of custom led_init_default_state_get()
leds: mt6360: Get rid of custom led_init_default_state_get()
leds: mt6323: Get rid of custom led_init_default_state_get()
leds: bcm6358: Get rid of custom led_init_default_state_get()
leds: bcm6328: Get rid of custom led_init_default_state_get()
leds: an30259a: Get rid of custom led_init_default_state_get()
leds: Move led_init_default_state_get() to the global header
leds: Add missing includes and forward declarations in leds.h
leds: is31fl319x: Wrap mutex_destroy() for devm_add_action_or_rest()
leds: turris-omnia: Convert to i2c's .probe_new()
leds: tlc591xx: Convert to i2c's .probe_new()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Drivers:
- Add support for Kinetic KTZ8866 Backlight
Removed Drivers:
- Toshiba Sharp SL-6000 LCD and Backlight
Fix-ups:
- Provide some profiling optimisations with respect to
pwm_get_state() and pwm_apply_state()
- Make use of the dev_err_probe() API
- Provide some Device Tree documentation additions / adaptions
- Drop fall-back legacy PWM probing support
- Convert over to new I2C probing API
- Fix incorrect documentation
- Make use of backlight_get_brightness() API
Bug Fixes:
- Fix disabling backlight on i.MX6 when inverted PWMs are used"
* tag 'backlight-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: ktz8866: Convert to i2c's .probe_new()
backlight: ktz8866: Add support for Kinetic KTZ8866 backlight
dt-bindings: leds: backlight: Add Kinetic KTZ8866 backlight
backlight: pwm_bl: Don't rely on a disabled PWM emiting inactive state
backlight: pwm_bl: Configure pwm only once per backlight toggle
backlight: Remove pxa tosa support
backlight: aat2870: Use backlight helper
backlight: ipaq_micro: Use backlight helper
backlight: arcxcnn: Use backlight helper
backlight: sky81452: Fix sky81452_bl_platform_data kernel-doc
backlight: pwm_bl: Drop support for legacy PWM probing
dt-bindings: backlight: qcom-wled: Add PMI8950 compatible
backlight: ktd253: Switch to use dev_err_probe() helper
backlight: backlight: Fix doc for backlight_device_get_by_name
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Framework:
- Change MFD support status from Supported to Maintained
New Drivers:
- Add support for the Intel Platform Management Component Interface
(PMCI)
Removed Drivers:
- HTC PASIC3 LED/DS1WM
- Toshiba T7L66XB, TC6387XB and TC6393XB TMIO
New Device Support:
- Add support for N6000 Flash to Intel M10 BMC PMCI
- Add support for Lenovo Yoga Tab 3 to Intel CHTWC PMIC
New Functionality:
- Provide Reset support to Syscon
Fix-ups:
- Explicitly provide missing include files
- Pass platform type data/info via the SPI/I2C/DT registration
strategy
- Lots of DT documentation / adaptions
- Replace scnprintf() with preferred sysfs_emit()
- Remove unused / superfluous code
- Fix some trivial whitesspace / spelling / grammatical issues
- Replace pm_power_off with new and improved
register_sys_off_handler() API
Bug Fixes:
- Reintroduce RK808-clkout registration - fixing Wi-Fi and Bluetooth
- Repair the order of AXPxxx IRQ PEK RISE/FALL definitions
- Refuse to build CS5535 on unsupported UML architectures
- Fix memory leaks in error return paths
- Prevent refcount leaks in error return paths"
* tag 'mfd-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (40 commits)
dt-bindings: mfd: qcom,tcsr: Add compatible for IPQ5332
dt-bindings: mfd: Add NXP BBNSM
mfd: ntxec: Add version number for EC in Tolino Vision
dt-bindings: mfd: syscon: Add mt8365-syscfg
mfd: Remove toshiba tmio drivers
mfd: arizona: Use pm_runtime_resume_and_get() to prevent refcnt leak
mfd: syscon: Allow reset control for syscon devices
dt-bindings: mfd/syscon: Add resets property
dt-bindings: mfd: syscon: Add amd,pensando-elba-syscon compatible
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8226
mfd: simple-mfd-i2c: Fix incoherent comment regarding DT registration
mfd: axp20x: Switch to the sys-off handler API
mfd: core: Spelling s/compement/complement/
mfd: max8925: Remove the unused function irq_to_max8925()
mfd: qcom-pm8xxx: Remove set but unused variable 'rev'
dt-bindings: mfd: syscon: Document GXP register compatible
mfd: twl4030-power: Drop empty platform remove function
mfd: twl: Fix TWL6032 phy vbus detection
mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read()
MAINTAINERS: Move MFD from a Supported to Maintaied state
...
|
|
This adds support for the 256-byte internal RAM. There are two windows
which can be used to access this RAM: 64 bytes at 0x40 (the "standard"
address space) and 128 bytes at 0x80 (the "alternate" address space). We
use the standard address space because it is also accessible over SPI
(if such a port is ever done). We are limited to 32-byte reads for SMBus
compatibility, so there's no advantage to using the alternate address
space.
There are some reserved bits in the EXTRAM register, and the datasheet
doesn't say what to do with them. I've opted to skip a read/modify/write
and just write the whole thing. If this driver is ever converted to
regmap, this would be a good place to use regmap_update_bits.
Signed-off-by: Sean Anderson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"A healthy mix of EFI contributions this time:
- Performance tweaks for efifb earlycon (Andy)
- Preparatory refactoring and cleanup work in the efivar layer, which
is needed to accommodate the Snapdragon arm64 laptops that expose
their EFI variable store via a TEE secure world API (Johan)
- Enhancements to the EFI memory map handling so that Xen dom0 can
safely access EFI configuration tables (Demi Marie)
- Wire up the newly introduced IBT/BTI flag in the EFI memory
attributes table, so that firmware that is generated with ENDBR/BTI
landing pads will be mapped with enforcement enabled
- Clean up how we check and print the EFI revision exposed by the
firmware
- Incorporate EFI memory attributes protocol definition and wire it
up in the EFI zboot code (Evgeniy)
This ensures that these images can execute under new and stricter
rules regarding the default memory permissions for EFI page
allocations (More work is in progress here)
- CPER header cleanup (Dan Williams)
- Use a raw spinlock to protect the EFI runtime services stack on
arm64 to ensure the correct semantics under -rt (Pierre)
- EFI framebuffer quirk for Lenovo Ideapad (Darrell)"
* tag 'efi-next-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits)
firmware/efi sysfb_efi: Add quirk for Lenovo IdeaPad Duet 3
arm64: efi: Make efi_rt_lock a raw_spinlock
efi: Add mixed-mode thunk recipe for GetMemoryAttributes
efi: x86: Wire up IBT annotation in memory attributes table
efi: arm64: Wire up BTI annotation in memory attributes table
efi: Discover BTI support in runtime services regions
efi/cper, cxl: Remove cxl_err.h
efi: Use standard format for printing the EFI revision
efi: Drop minimum EFI version check at boot
efi: zboot: Use EFI protocol to remap code/data with the right attributes
efi/libstub: Add memory attribute protocol definitions
efi: efivars: prevent double registration
efi: verify that variable services are supported
efivarfs: always register filesystem
efi: efivars: add efivars printk prefix
efi: Warn if trying to reserve memory under Xen
efi: Actually enable the ESRT under Xen
efi: Apply allowlist to EFI configuration tables when running under Xen
efi: xen: Implement memory descriptor lookup based on hypercall
efi: memmap: Disregard bogus entries instead of returning them
...
|
|
SMU IF version mismatch as a warning message exists widely
after asic production, however, due to this log level setting,
such mismatch warning will be caught by automation test like
IGT and reported as a fake error after checking. As such mismatch
does not break anything, to reduce confusion, downgrade it from
dev_warn to dev_info.
Signed-off-by: Guchun Chen <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Support ecc info query for umc v8_10.
v2: Simplied by convert_error_address.
v3: Remove unused variable and invalid checking.
Signed-off-by: Candice Li <[email protected]>
Reviewed-by: Tao Zhou <[email protected]>
Reviewed-by: Stanley.Yang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add convert_error_address for umc v8_10.
Signed-off-by: Candice Li <[email protected]>
Reviewed-by: Tao Zhou <[email protected]>
Reviewed-by: Stanley.Yang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
bad_page_threshold controls page retirement behavior and it should be
also checked.
v2: simplify the condition of bad page handling path.
Signed-off-by: Tao Zhou <[email protected]>
Reviewed-by: Stanley.Yang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Ignore ras umc bad page threshold by default, GPU initialization won't
be stopped in this mode.
v2: refine the description of bad_page_threshold.
Signed-off-by: Tao Zhou <[email protected]>
Reviewed-by: Stanley.Yang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
If a UMC bad page is reserved but not freed by an application, the
application may trigger uncorrectable error repeatly by accessing the page.
v2: add specific function to do the check.
v3: remove duplicate pages, calculate new added bad page number.
v4: reuse save_bad_pages to calculate new added bad page number.
Signed-off-by: Tao Zhou <[email protected]>
Reviewed-by: Stanley.Yang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
It records how many bad pages are retired in one uncorrectable error.
Signed-off-by: Tao Zhou <[email protected]>
Reviewed-by: Stanley.Yang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
It is assumed the pptable used before runpm is same as
the one used afterwards. Thus, we can reuse the stored
copy and do not need to resetup the pptable again.
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Feifei Xu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The check for baco support relies on the correct baco state.
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Feifei Xu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
AMDGPU_IDS_FLAGS_CONFORMANT_TRUNC_COORD: important for conformance on gfx11
Other fields are exposed from IP discovery.
enabled_rb_pipes_mask_hi is added for future chips, currently 0.
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21403
Signed-off-by: Marek Olšák <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
In the kfd_wait_on_events() function, the kfd_event_waiter structure is
allocated by alloc_event_waiters(), but the event field of the waiter
structure is not initialized; When copy_from_user() fails in the
kfd_wait_on_events() function, it will enter exception handling to
release the previously allocated memory of the waiter structure;
Due to the event field of the waiters structure being accessed
in the free_waiters() function, this results in illegal memory access
and system crash, here is the crash log:
localhost kernel: RIP: 0010:native_queued_spin_lock_slowpath+0x185/0x1e0
localhost kernel: RSP: 0018:ffffaa53c362bd60 EFLAGS: 00010082
localhost kernel: RAX: ff3d3d6bff4007cb RBX: 0000000000000282 RCX: 00000000002c0000
localhost kernel: RDX: ffff9e855eeacb80 RSI: 000000000000279c RDI: ffffe7088f6a21d0
localhost kernel: RBP: ffffe7088f6a21d0 R08: 00000000002c0000 R09: ffffaa53c362be64
localhost kernel: R10: ffffaa53c362bbd8 R11: 0000000000000001 R12: 0000000000000002
localhost kernel: R13: ffff9e7ead15d600 R14: 0000000000000000 R15: ffff9e7ead15d698
localhost kernel: FS: 0000152a3d111700(0000) GS:ffff9e855ee80000(0000) knlGS:0000000000000000
localhost kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
localhost kernel: CR2: 0000152938000010 CR3: 000000044d7a4000 CR4: 00000000003506e0
localhost kernel: Call Trace:
localhost kernel: _raw_spin_lock_irqsave+0x30/0x40
localhost kernel: remove_wait_queue+0x12/0x50
localhost kernel: kfd_wait_on_events+0x1b6/0x490 [hydcu]
localhost kernel: ? ftrace_graph_caller+0xa0/0xa0
localhost kernel: kfd_ioctl+0x38c/0x4a0 [hydcu]
localhost kernel: ? kfd_ioctl_set_trap_handler+0x70/0x70 [hydcu]
localhost kernel: ? kfd_ioctl_create_queue+0x5a0/0x5a0 [hydcu]
localhost kernel: ? ftrace_graph_caller+0xa0/0xa0
localhost kernel: __x64_sys_ioctl+0x8e/0xd0
localhost kernel: ? syscall_trace_enter.isra.18+0x143/0x1b0
localhost kernel: do_syscall_64+0x33/0x80
localhost kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9
localhost kernel: RIP: 0033:0x152a4dff68d7
Allocate the structure with kcalloc, and remove redundant 0-initialization
and a redundant loop condition check.
Signed-off-by: Qu Huang <[email protected]>
Signed-off-by: Felix Kuehling <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
in early init to set harvest config if the vcn0/1 is disabled
rather than hard-code the ring attributes as before did
Signed-off-by: Jane Jian <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
APUs before Raven didn't support s0ix. As we just relieved some
of the safety checks for s0ix to improve power consumption on
APUs that support it but that are missing BIOS support a new
blind spot was introduced that a user could "try" to run s0ix.
Plug this hole so that if users try to run s0ix on anything older
than Raven it will just skip suspend of the GPU.
Fixes: cf488dcd0ab7 ("drm/amd: Allow s0ix without BIOS support")
Suggested-by: Alexander Deucher <[email protected]>
Signed-off-by: Mario Limonciello <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
GFX v11 changes RB_BACKEND_DISABLE related registers
from per SA to global ones. The approach to query active
rb bitmap needs to be changed accordingly. Query per
SE setting returns wrong active RB bitmap especially
in the case when some of SA are disabled. With the new
approach, driver will generate the active rb bitmap
based on active SA bitmap and global active RB bitmap.
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Likun Gao <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Since the VRAM manager changed from drm mm to drm buddy. It's
not necessary to allocate 2MB aligned VRAM for more than 2MB
unaligned size, and then do trim. This method improves the
allocation efficiency and reduces memory fragmentation.
v2: Correct the remainder operation
Signed-off-by: Shane Xiao <[email protected]>
Reviewed-by: Arunpravin Paneer Selvam <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Since VRAM manager is changed from drm mm to drm buddy, the
TOP_DOWN flag should not be set by default in the large bar system.
Removing this flag helps improve drm buddy allocator efficiency and
reduce the risk of splitting higher order block into lower order.
Signed-off-by: Shane Xiao <[email protected]>
Reviewed-by: Christian K�nig <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Keeps this selection with the rest of the DRM HELPER
selection.
Signed-off-by: Harry Wentland <[email protected]>
Reviewed-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Since, hot plugging eDP displays isn't supported, it is sufficient for
us to warn about the lack of a connected display once. So, use ASSERT()
in dce110_edp_wait_for_hpd_ready() instead of DC_LOG_WARNING().
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: Hamza Mahfooz <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
re-enable ac/dc on smu_v13_0_0/10
Signed-off-by: Kenneth Feng <[email protected]>
Reviewed-by: Yang Wang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
this patch to add tmz support for GC 10.3.6
Signed-off-by: Jesse Zhang <[email protected]>
Reviewed-by: Yifan Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
For the MQD memory, KMD would always allocate 4K memory,
and mes scheduler would write to the end of MQD for unmap flag.
Signed-off-by: Ruili Ji <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
IPQ5332 has the APSS clock controller utilizing the same register space
as the APCS, so provide access to the APSS utilizing a child device like
other IPQ chipsets.
Like IPQ6018, the same controller and driver is used, so utilize IPQ6018
match data for IPQ5332.
Signed-off-by: Kathiravan T <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>
|
|
MSM8996 also has the clock-related part of the APCS mailbox device.
Follow the usual pattern and create a child device to handle these
clocks.
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>
|