aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2023-05-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextJakub Kicinski4-15/+35
There's a fix which landed in net-next, pull it in along with the couple of minor cleanups. Signed-off-by: Jakub Kicinski <[email protected]>
2023-05-05Merge tag 'devicetree-fixes-for-6.4-1' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Add Conor Dooley as a DT binding maintainer - Swap the order of parsing /memreserve/ and /reserved-memory nodes so that the /reserved-memory nodes which have more information are handled first - Fix some property dependencies in riscv,pmu binding - Update maintainers entries on a couple of bindings * tag 'devicetree-fixes-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: MAINTAINERS: add Conor as a dt-bindings maintainer dt-bindings: perf: riscv,pmu: fix property dependencies dt-bindings: xilinx: Remove Naga from memory and mtd bindings of: fdt: Scan /memreserve/ last dt-bindings: clock: r9a06g032-sysctrl: Change maintainer to Fabrizio Castro dt-bindings: pinctrl: renesas,rzv2m: Change maintainer to Fabrizio Castro dt-bindings: pinctrl: renesas,rzn1: Change maintainer to Fabrizio Castro dt-bindings: i2c: renesas,rzv2m: Change maintainer to Fabrizio Castro
2023-05-05Merge tag 'riscv-for-linus-6.4-mw2' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - Support for hibernation - The .rela.dyn section has been moved to the init area - A fix for the SBI probing to allow for implementation-defined behavior - Various other fixes and cleanups throughout the tree * tag 'riscv-for-linus-6.4-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: include cpufeature.h in cpufeature.c riscv: Move .rela.dyn to the init sections dt-bindings: riscv: explicitly mention assumption of Zicsr & Zifencei support riscv: compat_syscall_table: Fixup compile warning RISC-V: fixup in-flight collision with ARCH_WANT_OPTIMIZE_VMEMMAP rename RISC-V: fix sifive and thead section mismatches in errata RISC-V: Align SBI probe implementation with spec riscv: mm: remove redundant parameter of create_fdt_early_page_table riscv: Adjust dependencies of HAVE_DYNAMIC_FTRACE selection RISC-V: Add arch functions to support hibernation/suspend-to-disk RISC-V: mm: Enable huge page support to kernel_page_present() function RISC-V: Factor out common code of __cpu_resume_enter() RISC-V: Change suspend_save_csrs and suspend_restore_csrs to public function
2023-05-05Merge tag 'acpi-6.4-rc1-3' of ↵Linus Torvalds1-14/+0
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Remove an ACPI backlight quirk for Lenovo ThinkPad W530, added during the 6.3 cycle, that turned out to do more harm than help (Hans de Goede)" * tag 'acpi-6.4-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: video: Remove acpi_backlight=video quirk for Lenovo ThinkPad W530
2023-05-05Merge tag 'thermal-6.4-rc1-3' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fixes from Rafael Wysocki: "These fix a NULL pointer dereference in the Intel powerclamp driver introduced during the 6.3 cycle and update MAINTAINERS to match recent code changes. Specifics: - Fix NULL pointer access in the Intel powerclamp thermal driver that occurs on attempts to set the cooling device state to 0 in the default configuration (Srinivas Pandruvada) - Drop the stale MAINTAINERS entry for the Intel Menlow thermal driver that has been removed recently (Lukas Bulwahn)" * tag 'thermal-6.4-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: MAINTAINERS: remove section INTEL MENLOW THERMAL DRIVER thermal: intel: powerclamp: Fix NULL pointer access issue
2023-05-05Merge tag 'phy-fixes-6.4-1' of ↵Linus Torvalds1-8/+4
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy fixes from Vinod Koul: - Fix for mediatek driver warning for variable used uninitialized and for wrong pll math * tag 'phy-fixes-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: mediatek: hdmi: mt8195: fix wrong pll calculus phy: mediatek: hdmi: mt8195: fix uninitialized variable usage in pll_calc
2023-05-05Merge tag 'drm-next-2023-05-05' of git://anongit.freedesktop.org/drm/drmLinus Torvalds50-263/+415
Pull more drm fixes from Dave Airlie: "This is the fixes for the last couple of weeks for i915 and last 3 weeks for amdgpu, lots of them but pretty scattered around and all pretty small. amdgpu: - SR-IOV fixes - DCN 3.2 fixes - DC mclk handling fixes - eDP fixes - SubVP fixes - HDCP regression fix - DSC fixes - DC FP fixes - DCN 3.x fixes - Display flickering fix when switching between vram and gtt - Z8 power saving fix - Fix hang when skipping modeset - GPU reset fixes - Doorbell fix when resizing BARs - Fix spurious warnings in gmc - Locking fix for AMDGPU_SCHED IOCTL - SR-IOV fix - DCN 3.1.4 fix - DCN 3.2 fix - Fix job cleanup when CS is aborted i915: - skl pipe source size check - mtl transcoder mask fix - DSI power on sequence fix - GuC versioning corner case fix" * tag 'drm-next-2023-05-05' of git://anongit.freedesktop.org/drm/drm: (48 commits) drm/amdgpu: drop redundant sched job cleanup when cs is aborted drm/amd/display: filter out invalid bits in pipe_fuses drm/amd/display: Change default Z8 watermark values drm/amdgpu: disable SDMA WPTR_POLL_ENABLE for SR-IOV drm/amdgpu: add a missing lock for AMDGPU_SCHED drm/amdgpu: fix an amdgpu_irq_put() issue in gmc_v9_0_hw_fini() drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_fini drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini drm/amdgpu: Enable doorbell selfring after resize FB BAR drm/amdgpu: Use the default reset when loading or reloading the driver drm/amdgpu: Fix mode2 reset for sienna cichlid drm/i915/dsi: Use unconditional msleep() instead of intel_dsi_msleep() drm/i915/mtl: Add the missing CPU transcoder mask in intel_device_info drm/i915/guc: Actually return an error if GuC version range check fails drm/amd/display: Lowering min Z8 residency time drm/amd/display: fix flickering caused by S/G mode drm/amd/display: Set min_width and min_height capability for DCN30 drm/amd/display: Isolate remaining FPU code in DCN32 drm/amd/display: Update bounding box values for DCN321 drm/amd/display: Do not clear GPINT register when releasing DMUB from reset ...
2023-05-05drm/bridge: tc358768: remove unused variableFrancesco Dolcini1-3/+1
Remove the unused phy_delay_nsk variable, before it was wrongly used to compute some register value, the fixed computation is no longer using it and therefore can be removed. Signed-off-by: Francesco Dolcini <[email protected]> Reviewed-by: Robert Foss <[email protected]> Signed-off-by: Robert Foss <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-05-05drm/bridge: tc358768: fix THS_TRAILCNT computationFrancesco Dolcini1-3/+4
Correct computation of THS_TRAILCNT register. This register must be set to a value that ensure that THS_TRAIL > 60 ns + 4 x UI and THS_TRAIL > 8 x UI and THS_TRAIL < TEOT with TEOT = 105 ns + (12 x UI) with the actual value of THS_TRAIL being (1 + THS_TRAILCNT) x ByteClk cycle + ((1 to 2) + 2) xHSBYTECLK cycle + - (PHY output delay) with PHY output delay being about (8 + (5 to 6)) x MIPIBitClk cycle in the BitClk conversion. Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver") Signed-off-by: Francesco Dolcini <[email protected]> Reviewed-by: Robert Foss <[email protected]> Signed-off-by: Robert Foss <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-05-05drm/bridge: tc358768: fix TXTAGOCNT computationFrancesco Dolcini1-1/+1
Correct computation of TXTAGOCNT register. This register must be set to a value that ensure that the TTA-GO period = (4 x TLPX) with the actual value of TTA-GO being 4 x (TXTAGOCNT + 1) x (HSByteClk cycle) Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver") Signed-off-by: Francesco Dolcini <[email protected]> Reviewed-by: Robert Foss <[email protected]> Signed-off-by: Robert Foss <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-05-05drm/bridge: tc358768: fix THS_ZEROCNT computationFrancesco Dolcini1-3/+4
Correct computation of THS_ZEROCNT register. This register must be set to a value that ensure that THS_PREPARE + THS_ZERO > 145ns + 10*UI with the actual value of (THS_PREPARE + THS_ZERO) being ((1 to 2) + 1 + (TCLK_ZEROCNT + 1) + (3 to 4)) x ByteClk cycle + + HSByteClk x (2 + (1 to 2)) + (PHY delay) with PHY delay being about (8 + (5 to 6)) x MIPIBitClk cycle in the BitClk conversion. Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver") Signed-off-by: Francesco Dolcini <[email protected]> Reviewed-by: Robert Foss <[email protected]> Signed-off-by: Robert Foss <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-05-05drm/bridge: tc358768: fix TCLK_TRAILCNT computationFrancesco Dolcini1-3/+5
Correct computation of TCLK_TRAILCNT register. The driver does not implement non-continuous clock mode, so the actual value doesn't make a practical difference yet. However this change also ensures that the value does not write to reserved registers bits in case of under/overflow. This register must be set to a value that ensures that TCLK-TRAIL > 60ns and TEOT <= (105 ns + 12 x UI) with the actual value of TCLK-TRAIL being (TCLK_TRAILCNT + (1 to 2)) xHSByteClkCycle + (2 + (1 to 2)) * HSBYTECLKCycle - (PHY output delay) with PHY output delay being about (2 to 3) x MIPIBitClk cycle in the BitClk conversion. Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver") Signed-off-by: Francesco Dolcini <[email protected]> Reviewed-by: Robert Foss <[email protected]> Signed-off-by: Robert Foss <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-05-05drm/bridge: tc358768: fix TCLK_ZEROCNT computationFrancesco Dolcini1-4/+4
Correct computation of TCLK_ZEROCNT register. This register must be set to a value that ensure that (TCLK-PREPARECNT + TCLK-ZERO) > 300ns with the actual value of (TCLK-PREPARECNT + TCLK-ZERO) being (1 to 2) + (TCLK_ZEROCNT + 1)) x HSByteClkCycle + (PHY output delay) with PHY output delay being about (2 to 3) x MIPIBitClk cycle in the BitClk conversion. Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver") Signed-off-by: Francesco Dolcini <[email protected]> Reviewed-by: Robert Foss <[email protected]> Signed-off-by: Robert Foss <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-05-05drm/bridge: tc358768: fix PLL target frequencyFrancesco Dolcini1-3/+5
Correctly compute the PLL target frequency, the current formula works correctly only when the input bus width is 24bit, actually to properly compute the PLL target frequency what is relevant is the bits-per-pixel on the DSI link. No regression expected since the DSI format is currently hard-coded as MIPI_DSI_FMT_RGB888. Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver") Signed-off-by: Francesco Dolcini <[email protected]> Reviewed-by: Robert Foss <[email protected]> Signed-off-by: Robert Foss <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-05-05drm/bridge: tc358768: fix PLL parameters computationFrancesco Dolcini1-1/+5
According to Toshiba documentation the PLL input clock after the divider should be not less than 4MHz, fix the PLL parameters computation accordingly. Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver") Signed-off-by: Francesco Dolcini <[email protected]> Reviewed-by: Robert Foss <[email protected]> Signed-off-by: Robert Foss <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-05-05drm/bridge: tc358768: always enable HS video modeFrancesco Dolcini1-2/+1
Always enable HS video mode setting the TXMD bit, without this change no video output is present with DSI sinks that are setting MIPI_DSI_MODE_LPM flag (tested with LT8912B DSI-HDMI bridge). Previously the driver was enabling HS mode only when the DSI sink was not explicitly setting the MIPI_DSI_MODE_LPM, however this is not correct. The MIPI_DSI_MODE_LPM is supposed to indicate that the sink is willing to receive data in low power mode, however clearing the TC358768_DSI_CONTROL_TXMD bit will make the TC358768 send video in LP mode that is not the intended behavior. Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver") Signed-off-by: Francesco Dolcini <[email protected]> Reviewed-by: Robert Foss <[email protected]> Signed-off-by: Robert Foss <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-05-05drm/i915/mtl: Define GuC firmware version for MTLJohn Harrison1-0/+1
First release of GuC for Meteorlake. Signed-off-by: John Harrison <[email protected]> Reviewed-by: Lucas De Marchi <[email protected]> Signed-off-by: Lucas De Marchi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-05-05drm/i915: Pick one HDMI port for infoframe/audio transmission on g4xVille Syrjälä3-3/+129
On g4x the hardware has only one audio/video DIP block. Thus only one HDMI port can transmit audio/infoframes at a time. Currently we pretend that multiple ports can do it at the same time, but that doesn't actually work for two reasons: - the state of the single hw block will get clobbered by the multiple ports, leading to state checker failures - the hardware will automagically disable audio/infoframe transmission when enabled on multiple ports To fix this let's allow only one of the ports to transmit audio/infoframes at a time. We'll just go over all the HDMI ports and pick the first one that is otherwise capable of audio/infoframes. Further HDMI ports will be treated as if they had a DVI sink connected. In order to compute this consistently we'll also need to always add all HDMI ports to the atomic state. Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Uma Shankar <[email protected]>
2023-05-05drm/i915: Move has_hdmi_sink out from intel_hdmi_compute_config()Ville Syrjälä4-4/+19
We'll be wanting to compute has_hdmi_sink a bit differently for some platforms. To that end compute it in the encoder .compute_config_hook() before we call intel_hdmi_compute_config(). intel_hdmi_compute_has_hdmi_sink() will do the basic lifting beyond any platform specific stuff. Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Jani Nikula <[email protected]>
2023-05-05drm/i915/uc: Track patch level versions on reduced version firmware filesJohn Harrison1-11/+19
When reduced version firmware files were added (matching major component being the only strict requirement), the minor version was still tracked and a notification reported if it was older. However, the patch version should really be tracked as well for the same reasons. The KMD can work without the change but if the effort has been taken to release a new firmware with the change then there must be a valid reason for doing so - important bug fix, security fix, etc. And in that case it would be good to alert the user if they are missing out on that new fix. v2: Use correct patch version number and drop redunant debug print (review by Daniele / CI results). Signed-off-by: John Harrison <[email protected]> Reviewed-by: Daniele Ceraolo Spurio <[email protected]> Signed-off-by: Lucas De Marchi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-05-05drm/i915/dp: Rearrange check for illegal mode and comments in mode_validAnkit Nautiyal1-7/+7
Check for MODE_H_ILLEGAL before calculating max rates, lanes etc. Move comments about compressed bpp U6.4 format closer to where it is used. Signed-off-by: Ankit Nautiyal <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-05-05drm/i915/dp: Add helper to get sink_formatAnkit Nautiyal1-15/+15
Common function to get the sink format for a given mode for DP. Signed-off-by: Ankit Nautiyal <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-05-05drm/i915/display: Use sink_format instead of ycbcr420_output flagAnkit Nautiyal3-36/+45
Start passing the sink_format, to all functions that take a bool ycbcr420_output as parameter. This will make the functions generic, and will serve as a slight step towards 4:2:2 support later. v2: Rebased. v3: Correct the checks in places concerned with pipe output. (Ville) Other minor styling and refactoring fixes, as suggested by Ville. Suggested-by: Ville Syrjälä <[email protected]> Signed-off-by: Ankit Nautiyal <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-05-05drm/i915/dp: Configure PCON for conversion of output_format to YCbCr444Ankit Nautiyal1-0/+11
Handle the case with DP to HDMI PCON, where sink_format is set to YCbCr444. In that case PCON is required to be configured to convert from given output_format to YCbCR444. v2: Drop drm_WARN for invalid case, let MISSING_CASE catch it. (Ville) Signed-off-by: Ankit Nautiyal <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-05-05drm/i915/dp: Replace intel_dp.dfp members with the new crtc_state sink_formatAnkit Nautiyal2-53/+119
The decision to use DFP output format conversion capabilities should be during compute_config phase. This patch uses the members of intel_dp->dfp to only store the format conversion capabilities of the DP device and uses the crtc_state sink_format member, to program the protocol-converter for colorspace/format conversion. v2: Use sink_format to determine the color conversion config for the pcon (Ville). v3: Fix typo: missing 'break' in switch case (lkp kernel test robot). v4: Add helper to check if DP supports YCBCR420. v5: Simplify logic for computing output_format, based on the given sink_format. (Ville). Added scaler constraint for YCbCr420 output. v6: Split the patch for Scaler constraint for Ycbcr420. v7: Simplify the policy for selecting output_format: Always try for RGB first, followed by YCBCR444, and finally by YCBCR420. v8: Removed redundant comments, minor refactoring. (Ville) v9: Added member for ycbcr420 passthrough cap, fixed minor issues. (Ville) Signed-off-by: Ankit Nautiyal <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-05-05drm/i915/display: Add new member to configure PCON color conversionAnkit Nautiyal13-22/+67
The decision to use DFP output format conversion capabilities should be during compute_config phase. This patch adds new member to crtc_state to represent the final output_format to the sink. In case of a DFP this can be different than the output_format, as per the format conversion done via the PCON. This will help to store only the format conversion capabilities of the DP device in intel_dp->dfp, and use crtc_state to compute and store the configuration for color/format conversion for a given mode. v2: modified the new member to crtc_state to represent the final output_format that eaches the sink, after possible conversion by PCON kind of devices. (Ville) v3: Addressed comments from Ville: -Added comments to clarify difference between sink_format and output_format. -Corrected the order of setting sink_format and output_format. -Added readout for sink_format in get_pipe_config hooks. v4: Set sink_format for intel_sdvo too. (Ville) v5: Rebased. v6: Fixed condition to go for YCbCr420 format for dp and hdmi. (Ville) v7: Fix the condition to set sink_format for HDMI. Set hdmi output_format simply as sink_format. (Ville) Signed-off-by: Ankit Nautiyal <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> (v3) Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-05-05drm/rockchip: vop: Leave vblank enabled in self-refreshBrian Norris1-4/+4
If we disable vblank when entering self-refresh, vblank APIs (like DRM_IOCTL_WAIT_VBLANK) no longer work. But user space is not aware when we enter self-refresh, so this appears to be an API violation -- that DRM_IOCTL_WAIT_VBLANK fails with EINVAL whenever the display is idle and enters self-refresh. The downstream driver used by many of these systems never used to disable vblank for PSR, and in fact, even upstream, we didn't do that until radically redesigning the state machine in commit 6c836d965bad ("drm/rockchip: Use the helpers for PSR"). Thus, it seems like a reasonable API fix to simply restore that behavior, and leave vblank enabled. Note that this appears to potentially unbalance the drm_crtc_vblank_{off,on}() calls in some cases, but: (a) drm_crtc_vblank_on() documents this as OK and (b) if I do the naive balancing, I find state machine issues such that we're not in sync properly; so it's easier to take advantage of (a). This issue was exposed by IGT's kms_vblank tests, and reported by KernelCI. The bug has been around a while (longer than KernelCI noticed), but was only exposed once self-refresh was bugfixed more recently, and so KernelCI could properly test it. Some other notes in: https://lore.kernel.org/dri-devel/[email protected]/ Re: renesas/master bisection: igt-kms-rockchip.kms_vblank.pipe-A-wait-forked on rk3399-gru-kevin == Backporting notes: == Marking as 'Fixes' commit 6c836d965bad ("drm/rockchip: Use the helpers for PSR"), but it probably depends on commit bed030a49f3e ("drm/rockchip: Don't fully disable vop on self refresh") as well. We also need the previous patch ("drm/atomic: Allow vblank-enabled + self-refresh "disable""), of course. v3: * no update v2: * skip unnecessary lock/unlock Fixes: 6c836d965bad ("drm/rockchip: Use the helpers for PSR") Cc: <[email protected]> Reported-by: "kernelci.org bot" <[email protected]> Link: https://lore.kernel.org/dri-devel/[email protected]/ Signed-off-by: Brian Norris <[email protected]> Signed-off-by: Sean Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20230109171809.v3.2.Ic07cba4ab9a7bd3618a9e4258b8f92ea7d10ae5a@changeid
2023-05-05drm/atomic: Allow vblank-enabled + self-refresh "disable"Brian Norris1-1/+10
The self-refresh helper framework overloads "disable" to sometimes mean "go into self-refresh mode," and this mode activates automatically (e.g., after some period of unchanging display output). In such cases, the display pipe is still considered "on", and user-space is not aware that we went into self-refresh mode. Thus, users may expect that vblank-related features (such as DRM_IOCTL_WAIT_VBLANK) still work properly. However, we trigger the WARN_ONCE() here if a CRTC driver tries to leave vblank enabled. Add a different expectation: that CRTCs *should* leave vblank enabled when going into self-refresh. This patch is preparation for another patch -- "drm/rockchip: vop: Leave vblank enabled in self-refresh" -- which resolves conflicts between the above self-refresh behavior and the API tests in IGT's kms_vblank test module. == Some alternatives discussed: == It's likely that on many display controllers, vblank interrupts will turn off when the CRTC is disabled, and so in some cases, self-refresh may not support vblank. To support such cases, we might consider additions to the generic helpers such that we fire vblank events based on a timer. However, there is currently only one driver using the common self-refresh helpers (i.e., rockchip), and at least as of commit bed030a49f3e ("drm/rockchip: Don't fully disable vop on self refresh"), the CRTC hardware is powered enough to continue to generate vblank interrupts. So we chose the simpler option of leaving vblank interrupts enabled. We can reevaluate this decision and perhaps augment the helpers if/when we gain a second driver that has different requirements. v3: * include discussion summary v2: * add 'ret != 0' warning case for self-refresh * describe failing test case and relation to drm/rockchip patch better Cc: <[email protected]> # dependency for "drm/rockchip: vop: Leave # vblank enabled in self-refresh" Signed-off-by: Brian Norris <[email protected]> Signed-off-by: Sean Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20230109171809.v3.1.I3904f697863649eb1be540ecca147a66e42bfad7@changeid
2023-05-05drm/i915/dp: prevent potential div-by-zeroNikita Zhandarovich1-0/+5
drm_dp_dsc_sink_max_slice_count() may return 0 if something goes wrong on the part of the DSC sink and its DPCD register. This null value may be later used as a divisor in intel_dsc_compute_params(), which will lead to an error. In the unlikely event that this issue occurs, fix it by testing the return value of drm_dp_dsc_sink_max_slice_count() against zero. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: a4a157777c80 ("drm/i915/dp: Compute DSC pipe config in atomic check") Signed-off-by: Nikita Zhandarovich <[email protected]> Reviewed-by: Rodrigo Vivi <[email protected]> Signed-off-by: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-05-05drm/i915: use kernel-doc -Werror when CONFIG_DRM_I915_WERROR=yJani Nikula1-2/+2
With CONFIG_DRM_I915_WERROR=y, we enable kernel-doc check for both objects and headers. Now that the kernel-doc warnings have been fixed, also enable kernel-doc -Werror to fail the build on kernel-doc warnings. Signed-off-by: Jani Nikula <[email protected]> Reviewed-by: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/68ffcad0e6ff2b6cd70c6df28822f967898ce197.1683041799.git.jani.nikula@intel.com
2023-05-05drm/i915: Fix NULL ptr deref by checking new_crtc_stateStanislav Lisovskiy1-2/+2
intel_atomic_get_new_crtc_state can return NULL, unless crtc state wasn't obtained previously with intel_atomic_get_crtc_state, so we must check it for NULLness here, just as in many other places, where we can't guarantee that intel_atomic_get_crtc_state was called. We are currently getting NULL ptr deref because of that, so this fix was confirmed to help. Fixes: 74a75dc90869 ("drm/i915/display: move plane prepare/cleanup to intel_atomic_plane.c") Signed-off-by: Stanislav Lisovskiy <[email protected]> Reviewed-by: Andrzej Hajda <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-05-05net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()Florian Fainelli1-1/+0
The call to phy_stop() races with the later call to phy_disconnect(), resulting in concurrent phy_suspend() calls being run from different CPUs. The final call to phy_disconnect() ensures that the PHY is stopped and suspended, too. Fixes: c96e731c93ff ("net: bcmgenet: connect and disconnect from the PHY state machine") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-05-05pds_core: fix mutex double unlock in error pathShannon Nelson1-8/+13
Fix a double unlock in an error handling path by unlocking as soon as the error is seen and removing unlocks in the error cleanup path. Link: https://lore.kernel.org/kernel-janitors/[email protected]/ Fixes: 523847df1b37 ("pds_core: add devcmd device interfaces") Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Shannon Nelson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-05-05net: fec: correct the counting of XDP sent framesShenwei Wang1-4/+9
In the current xdp_xmit implementation, if any single frame fails to transmit due to insufficient buffer descriptors, the function nevertheless reports success in sending all frames. This results in erroneously indicating that frames were transmitted when in fact they were dropped. This patch fixes the issue by ensureing the return value properly indicates the actual number of frames successfully transmitted, rather than potentially reporting success for all frames when some could not transmit. Fixes: 6d6b39f180b8 ("net: fec: add initial XDP support") Signed-off-by: Gagandeep Singh <[email protected]> Signed-off-by: Shenwei Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-05-05drm/i915: Communicate display power demands to pcodeStanislav Lisovskiy2-12/+160
Display to communicate display pipe count/CDCLK/voltage configuration to Pcode for more accurate power accounting for DG2. Existing sequence is only sending the voltage value to the Pcode. Adding new sequence with current cdclk associate with voltage value masking. Adding pcode request when any pipe power well will disable or enable. v2: - Make intel_cdclk_need_serialize static to make CI compiler happy. v3: - Removed redundant return(Jani Nikula) - Changed intel_cdclk_power_usage_to_pcode_(pre|post)_notification to be static and also naming to intel_cdclk_pcode_(pre|post)_notify(Jani Nikula) - Changed u8 to be u16 for cdclk parameter in intel_pcode_notify function, as according to BSpec it requires 10 bits(Jani Nikula) - Replaced dev_priv's with i915's(Jani Nikula) - Simplified expression in intel_cdclk_need_serialize(Jani Nikula) - Removed redundant kernel-doc and indentation(Jani Nikula) v4: - Fixed some checkpatch warnings v5: - According to HW team comments that change should affect only DG2, fix correspodent platform check to account this. v6: - Added one more missing IS_DG2 check(Vinod Govindapillai) Signed-off-by: Stanislav Lisovskiy <[email protected]> Reviewed-by: Vinod Govindapillai <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-05-05bonding: add xdp_features supportLorenzo Bianconi2-0/+31
Introduce xdp_features support for bonding driver according to the slave devices attached to the master one. xdp_features is required whenever we want to xdp_redirect traffic into a bond device and then into selected slaves attached to it. Reviewed-by: Simon Horman <[email protected]> Acked-by: Jay Vosburgh <[email protected]> Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features") Signed-off-by: Lorenzo Bianconi <[email protected]> Reviewed-by: Jussi Maki <[email protected]> Tested-by: Jussi Maki <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-05-05net: enetc: check the index of the SFI rather than the handleWei Fang1-1/+1
We should check whether the current SFI (Stream Filter Instance) table is full before creating a new SFI entry. However, the previous logic checks the handle by mistake and might lead to unpredictable behavior. Fixes: 888ae5a3952b ("net: enetc: add tc flower psfp offload driver") Signed-off-by: Wei Fang <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-05-05virtio_net: suppress cpu stall when free_unused_bufsWenliang Wang1-0/+2
For multi-queue and large ring-size use case, the following error occurred when free_unused_bufs: rcu: INFO: rcu_sched self-detected stall on CPU. Fixes: 986a4f4d452d ("virtio_net: multiqueue support") Signed-off-by: Wenliang Wang <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-05-05ice: block LAN in case of VF to VF offloadMichal Swiatkowski1-1/+2
VF to VF traffic shouldn't go outside. To enforce it, set only the loopback enable bit in case of all ingress type rules added via the tc tool. Fixes: 0d08a441fb1a ("ice: ndo_setup_tc implementation for PF") Reported-by: Sujai Buvaneswaran <[email protected]> Signed-off-by: Michal Swiatkowski <[email protected]> Tested-by: George Kuruvinakunnel <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-05-05drm/i915/ttm: fix i915_ttm_to_gem() kernel-docJani Nikula1-1/+2
drivers/gpu/drm/i915/gem/i915_gem_ttm.h:50: warning: Function parameter or member 'bo' not described in 'i915_ttm_to_gem' v2: Fix return value documentation while at it (Rodrigo) Signed-off-by: Jani Nikula <[email protected]> Reviewed-by: Nirmoy Das <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-05-05drm/i915/scatterlist: fix kernel-docJani Nikula1-2/+1
Can't document function pointer members as if they are functions. drivers/gpu/drm/i915/i915_scatterlist.h:160: warning: Incorrect use of kernel-doc format: * release() - Free the memory of the struct i915_refct_sgt Signed-off-by: Jani Nikula <[email protected]> Reviewed-by: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/a0c099707ec4f1911b14b0f286848a298b2b29e0.1683041799.git.jani.nikula@intel.com
2023-05-05drm/i915/gem: fix function pointer member kernel-docJani Nikula1-3/+1
You can't document function pointer member as functions. drivers/gpu/drm/i915/gem/i915_gem_region.h:25: warning: Incorrect use of kernel-doc format: * process_obj - Process the current object drivers/gpu/drm/i915/gem/i915_gem_region.h:35: warning: Function parameter or member 'process_obj' not described in 'i915_gem_apply_to_region_ops' Signed-off-by: Jani Nikula <[email protected]> Reviewed-by: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/a2a81f9ee78591def0534c81a63dbc652c44bbd3.1683041799.git.jani.nikula@intel.com
2023-05-05drm/i915/vma: fix struct i915_vma_bindinfo kernel-docJani Nikula1-18/+27
You can't document both a sub-struct type and a struct member at the same time. Separate them. drivers/gpu/drm/i915/i915_vma_resource.h:91: warning: Incorrect use of kernel-doc format: * struct i915_vma_bindinfo - Information needed for async bind drivers/gpu/drm/i915/i915_vma_resource.h:129: warning: Function parameter or member 'bi' not described in 'i915_vma_resource' Signed-off-by: Jani Nikula <[email protected]> Reviewed-by: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/89ab5cf179566c429383cc57db746038f75cba0d.1683041799.git.jani.nikula@intel.com
2023-05-05net: dsa: mt7530: fix network connectivity with multiple CPU portsArınç ÜNAL1-3/+7
On mt753x_cpu_port_enable() there's code that enables flooding for the CPU port only. Since mt753x_cpu_port_enable() runs twice when both CPU ports are enabled, port 6 becomes the only port to forward the frames to. But port 5 is the active port, so no frames received from the user ports will be forwarded to port 5 which breaks network connectivity. Every bit of the BC_FFP, UNM_FFP, and UNU_FFP bits represents a port. Fix this issue by setting the bit that corresponds to the CPU port without overwriting the other bits. Clear the bits beforehand only for the MT7531 switch. According to the documents MT7621 Giga Switch Programming Guide v0.3 and MT7531 Reference Manual for Development Board v1.0, after reset, the BC_FFP, UNM_FFP, and UNU_FFP bits are set to 1 for MT7531, 0 for MT7530. The commit 5e5502e012b8 ("net: dsa: mt7530: fix roaming from DSA user ports") silently changed the method to set the bits on the MT7530_MFC. Instead of clearing the relevant bits before mt7530_cpu_port_enable() which runs under a for loop, the commit started doing it on mt7530_cpu_port_enable(). Back then, this didn't really matter as only a single CPU port could be used since the CPU port number was hardcoded. The driver was later changed with commit 1f9a6abecf53 ("net: dsa: mt7530: get cpu-port via dp->cpu_dp instead of constant") to retrieve the CPU port via dp->cpu_dp. With that, this silent change became an issue for when using multiple CPU ports. Fixes: 5e5502e012b8 ("net: dsa: mt7530: fix roaming from DSA user ports") Signed-off-by: Arınç ÜNAL <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-05-05net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621Arınç ÜNAL1-2/+2
The multi-chip module MT7530 switch with a 40 MHz oscillator on the MT7621AT, MT7621DAT, and MT7621ST SoCs forwards corrupt frames using trgmii. This is caused by the assumption that MT7621 SoCs have got 150 MHz PLL, hence using the ncpo1 value, 0x0780. My testing shows this value works on Unielec U7621-06, Bartel's testing shows it won't work on Hi-Link HLK-MT7621A and Netgear WAC104. All devices tested have got 40 MHz oscillators. Using the value for 125 MHz PLL, 0x0640, works on all boards at hand. The definitions for 125 MHz PLL exist on the Banana Pi BPI-R2 BSP source code whilst 150 MHz PLL don't. Forwarding frames using trgmii on the MCM MT7530 switch with a 25 MHz oscillator on the said MT7621 SoCs works fine because the ncpo1 value defined for it is for 125 MHz PLL. Change the 150 MHz PLL comment to 125 MHz PLL, and use the 125 MHz PLL ncpo1 values for both oscillator frequencies. Link: https://github.com/BPI-SINOVOIP/BPI-R2-bsp/blob/81d24bbce7d99524d0771a8bdb2d6663e4eb4faa/u-boot-mt/drivers/net/rt2880_eth.c#L2195 Fixes: 7ef6f6f8d237 ("net: dsa: mt7530: Add MT7621 TRGMII mode support") Tested-by: Bartel Eerdekens <[email protected]> Signed-off-by: Arınç ÜNAL <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-05-04Merge tag 'linux-watchdog-6.4-rc1' of ↵Linus Torvalds47-355/+827
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - Add watchdog driver for StarFive JH7100 and JH7110 Soc - Add Rockchip RK3588 devices - Add Qualcom IPQ5332 APSS, QCM2290 KPSS and SM6115 SoC devices - Add Mediatke MT8365 and MT6735 devices - Watchdog-core: Always set WDOG_HW_RUNNING when starting watchdog - Convert watchdog platform drivers to return void on the remove callback - Convert to devm_clk_get_enabled() helpers - ... and other small fixes and improvements * tag 'linux-watchdog-6.4-rc1' of git://www.linux-watchdog.org/linux-watchdog: (72 commits) watchdog: dw_wdt: Simplify clk management watchdog: dw_wdt: Fix the error handling path of dw_wdt_drv_probe() watchdog: starfive: Fix the warning of starfive_wdt_match watchdog: starfive: Fix the probe return error if PM and early_enable are both disabled MAINTAINERS: Add fragment for Xilinx watchdog driver watchdog: menz069_wdt: fix timeout setting watchdog: menz069_wdt: fix watchdog initialisation dt-bindings: watchdog: alphascale-asm9260: convert to DT schema watchdog: loongson1_wdt: Implement restart handler dt-bindings: watchdog: Document Qualcomm SM6115 watchdog dt-bindings: watchdog: realtek,otto-wdt: simplify requiring interrupt-names dt-bindings: watchdog: toshiba,visconti-wdt: simplify with unevaluatedProperties dt-bindings: watchdog: fsl-imx7ulp-wdt: simplify with unevaluatedProperties dt-bindings: watchdog: arm,sp805: drop unneeded minItems dt-bindings: watchdog: drop duplicated GPIO watchdog bindings dt-bindings: reset: Add binding for MediaTek MT6735 TOPRGU/WDT drivers: watchdog: Add StarFive Watchdog driver dt-bindings: watchdog: Add watchdog for StarFive JH7100 and JH7110 dt-bindings: watchdog: indentation, quotes and white-space cleanup watchdog: ebc-c384_wdt: Mark status as orphaned ...
2023-05-05Merge tag 'drm-intel-next-fixes-2023-05-04-1' of ↵Dave Airlie6-38/+20
git://anongit.freedesktop.org/drm/drm-intel into drm-next Add missing GPU transcoder masks for MTL and fix DSI power on sequence for Nextbook Ares 8A. Fix GuC version corner case. Signed-off-by: Dave Airlie <[email protected]> From: Joonas Lahtinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-05-05Merge tag 'amd-drm-fixes-6.4-2023-05-03' of ↵Dave Airlie14-53/+78
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-fixes-6.4-2023-05-03: amdgpu: - GPU reset fixes - Doorbell fix when resizing BARs - Fix spurious warnings in gmc - Locking fix for AMDGPU_SCHED IOCTL - SR-IOV fix - DCN 3.1.4 fix - DCN 3.2 fix - Fix job cleanup when CS is aborted Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-05-05Merge tag 'drm-intel-next-fixes-2023-04-27' of ↵Dave Airlie1-0/+17
git://anongit.freedesktop.org/drm/drm-intel into drm-next One cc stable for pipe source size check on SKL+ Signed-off-by: Dave Airlie <[email protected]> From: Joonas Lahtinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-05-05Merge tag 'amd-drm-fixes-6.4-2023-04-26' of ↵Dave Airlie31-172/+300
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-fixes-6.4-2023-04-26: amdgpu: - SR-IOV fixes - DCN 3.2 fixes - DC mclk handling fixes - eDP fixes - SubVP fixes - HDCP regression fix - DSC fixes - DC FP fixes - DCN 3.x fixes - Display flickering fix when switching between vram and gtt - Z8 power saving fix - Fix hang when skipping modeset Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.