aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-01-24Merge tag 'usb-5.11-rc5' of ↵Linus Torvalds10-20/+58
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB driver fixes for 5.11-rc5. They resolve: - xhci issues for some reported problems - ehci driver issue for one specific device - USB gadget fixes for some reported problems - cdns3 driver fixes for issues reported - MAINTAINERS file update - thunderbolt minor fix All of these have been in linux-next with no reported issues" * tag 'usb-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: bdc: Make bdc pci driver depend on BROKEN xhci: tegra: Delay for disabling LFPS detector xhci: make sure TRB is fully written before giving it to the controller usb: udc: core: Use lock when write to soft_connect USB: gadget: dummy-hcd: Fix errors in port-reset handling usb: gadget: aspeed: fix stop dma register setting. USB: ehci: fix an interrupt calltrace error ehci: fix EHCI host controller initialization sequence MAINTAINERS: update Peter Chen's email address thunderbolt: Drop duplicated 0x prefix from format string MAINTAINERS: Update address for Cadence USB3 driver usb: cdns3: imx: improve driver .remove API usb: cdns3: imx: fix can't create core device the second time issue usb: cdns3: imx: fix writing read-only memory issue
2021-01-24Merge tag 'irq_urgent_for_v5.11_rc5' of ↵Linus Torvalds6-7/+17
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Borislav Petkov: - Fix a kernel panic in mips-cpu due to invalid irq domain hierarchy. - Fix to not lose IPIs on bcm2836. - Fix for a bogus marking of ITS devices as shared due to unitialized stack variable. - Clear a phantom interrupt on qcom-pdc to unblock suspend. - Small cleanups, warning and build fixes. * tag 'irq_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Export irq_check_status_bit() irqchip/mips-cpu: Set IPI domain parent chip irqchip/pruss: Simplify the TI_PRUSS_INTC Kconfig irqchip/loongson-liointc: Fix build warnings driver core: platform: Add extra error check in devm_platform_get_irqs_affinity() irqchip/bcm2836: Fix IPI acknowledgement after conversion to handle_percpu_devid_irq irqchip/irq-sl28cpld: Convert comma to semicolon genirq/msi: Initialize msi_alloc_info before calling msi_domain_prepare_irqs()
2021-01-23chtls: Fix potential resource leakPan Bian1-4/+3
The dst entry should be released if no neighbour is found. Goto label free_dst to fix the issue. Besides, the check of ndev against NULL is redundant. Signed-off-by: Pan Bian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-23net: dsa: bcm_sf2: put device node before returnPan Bian1-2/+6
Put the device node dn before return error code on failure path. Fixes: 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus") Signed-off-by: Pan Bian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-23Merge branch 'mtd/fixes' of ↵Linus Torvalds5-16/+27
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd fixes from Miquel Raynal. * 'mtd/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: omap: Use BCH private fields in the specific OOB layout mtd: spinand: Fix MTD_OPS_AUTO_OOB requests mtd: rawnand: intel: check the mtd name only after setting the variable mtd: rawnand: nandsim: Fix the logic when selecting Hamming soft ECC engine mtd: rawnand: gpmi: fix dst bit offset when extracting raw payload
2021-01-23Merge branch 'i2c/for-current' of ↵Linus Torvalds5-5/+44
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Another bunch of driver fixes" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: sprd: depend on COMMON_CLK to fix compile tests Revert "i2c: imx: Remove unused .id_table support" i2c: octeon: check correct size of maximum RECV_LEN packet i2c: tegra: Create i2c_writesl_vi() to use with VI I2C for filling TX FIFO i2c: bpmp-tegra: Ignore unknown I2C_M flags i2c: tegra: Wait for config load atomically while in ISR
2021-01-23Merge tag 'scsi-fixes' of ↵Linus Torvalds8-28/+68
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Twelve minor fixes, all in drivers or doc. Most of the fixes are pretty obvious (although we had two goes to get the UFS sysfs doc right) and the biggest change is in the ufs driver which they've extensively tested" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ibmvfc: Set default timeout to avoid crash during migration scsi: target: tcmu: Fix use-after-free of se_cmd->priv scsi: fnic: Fix memleak in vnic_dev_init_devcmd2 scsi: libfc: Avoid invoking response handler twice if ep is already completed scsi: scsi_transport_srp: Don't block target in failfast state scsi: docs: ABI: sysfs-driver-ufs: Rectify table formatting scsi: ufs: Fix tm request when non-fatal error happens scsi: ufs: Fix livelock of ufshcd_clear_ua_wluns() scsi: ibmvfc: Fix missing cast of ibmvfc_event pointer to u64 handle scsi: ufs: ufshcd-pltfrm depends on HAS_IOMEM scsi: megaraid_sas: Fix MEGASAS_IOC_FIRMWARE regression scsi: docs: ABI: sysfs-driver-ufs: Add DeepSleep power mode
2021-01-22net: fec: put child node on error pathPan Bian1-1/+2
Also decrement the reference count of child device on error path. Fixes: 3e782985cb3c ("net: ethernet: fec: Allow configuration of MDIO bus speed") Signed-off-by: Pan Bian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-22net: stmmac: dwmac-intel-plat: remove config data on errorPan Bian1-2/+2
Remove the config data when rate setting fails. Fixes: 9efc9b2b04c7 ("net: stmmac: Add dwmac-intel-plat for GBE driver") Signed-off-by: Pan Bian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-22net: octeontx2: Make sure the buffer is 128 byte alignedKevin Hao1-1/+2
The octeontx2 hardware needs the buffer to be 128 byte aligned. But in the current implementation of napi_alloc_frag(), it can't guarantee the return address is 128 byte aligned even the request size is a multiple of 128 bytes, so we have to request an extra 128 bytes and use the PTR_ALIGN() to make sure that the buffer is aligned correctly. Fixes: 7a36e4918e30 ("octeontx2-pf: Use the napi_alloc_frag() to alloc the pool buffers") Reported-by: Subbaraya Sundeep <[email protected]> Signed-off-by: Kevin Hao <[email protected]> Tested-by: Subbaraya Sundeep <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-22net: usb: qmi_wwan: added support for Thales Cinterion PLSx3 modem familyGiacinto Cifelli1-0/+1
Bus 003 Device 009: ID 1e2d:006f Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x1e2d idProduct 0x006f bcdDevice 0.00 iManufacturer 3 Cinterion Wireless Modules iProduct 2 PLSx3 iSerial 4 fa3c1419 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 303 bNumInterfaces 9 bConfigurationValue 1 iConfiguration 1 Cinterion Configuration bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 500mA Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 0 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 CDC Union: bMasterInterface 0 bSlaveInterface 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 2 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 3 CDC Union: bMasterInterface 2 bSlaveInterface 3 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 4 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 5 CDC Union: bMasterInterface 4 bSlaveInterface 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 6 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 6 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 7 CDC Union: bMasterInterface 6 bSlaveInterface 7 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 7 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 8 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8a EP 10 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Cc: [email protected] Signed-off-by: Giacinto Cifelli <[email protected]> Acked-by: Bjørn Mork <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-22Merge tag 'imx-fixes-5.11-2' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.11, round 2: - Fix pcf2127 reset for imx7d-flex-concentrator board. - Fix i.MX6 suspend with Thumb-2 kernel. - Fix ethernet-phy address issue on imx6qdl-sr-som board. - Fix GPIO3 `gpio-ranges` on i.MX8MP. - Select SOC_BUS for IMX_SCU driver to fix build issue. * tag 'imx-fixes-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: firmware: imx: select SOC_BUS to fix firmware build arm64: dts: imx8mp: Correct the gpio ranges of gpio3 ARM: dts: imx6qdl-sr-som: fix some cubox-i platforms ARM: imx: build suspend-imx6.S with arm instruction set ARM: dts: imx7d-flex-concentrator: fix pcf2127 reset Link: https://lore.kernel.org/r/20210119091949.GD4356@dragon Signed-off-by: Arnd Bergmann <[email protected]>
2021-01-22drivers: soc: atmel: add null entry at the end of at91_soc_allowed_list[]Claudiu Beznea1-1/+2
of_match_node() calls __of_match_node() which loops though the entries of matches array. It stops when condition: (matches->name[0] || matches->type[0] || matches->compatible[0]) is false. Thus, add a null entry at the end of at91_soc_allowed_list[] array. Fixes: caab13b49604 ("drivers: soc: atmel: Avoid calling at91_soc_init on non AT91 SoCs") Cc: [email protected] #4.12+ Signed-off-by: Claudiu Beznea <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2021-01-22Merge tag 'for-5.11/dm-fixes-2' of ↵Linus Torvalds3-8/+45
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix DM integrity crash if "recalculate" used without "internal_hash" - Fix DM integrity "recalculate" support to prevent recalculating checksums if we use internal_hash or journal_hash with a key (e.g. HMAC). Use of crypto as a means to prevent malicious corruption requires further changes and was never a design goal for dm-integrity's primary usecase of detecting accidental corruption. - Fix a benign dm-crypt copy-and-paste bug introduced as part of a fix that was merged for 5.11-rc4. - Fix DM core's dm_get_device() to avoid filesystem lookup to get block device (if possible). * tag 'for-5.11/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: avoid filesystem lookup in dm_get_dev_t() dm crypt: fix copy and paste bug in crypt_alloc_req_aead dm integrity: conditionally disable "recalculate" feature dm integrity: fix a crash if "recalculate" used without "internal_hash"
2021-01-22drivers: soc: atmel: Avoid calling at91_soc_init on non AT91 SoCsSudeep Holla1-0/+12
Since at91_soc_init is called unconditionally from atmel_soc_device_init, we get the following warning on all non AT91 SoCs: " AT91: Could not find identification node" Fix the same by filtering with allowed AT91 SoC list. Cc: Nicolas Ferre <[email protected]> Cc: Alexandre Belloni <[email protected]> Cc: Ludovic Desroches <[email protected]> Cc: [email protected] #4.12+ Signed-off-by: Sudeep Holla <[email protected]> Signed-off-by: Alexandre Belloni <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2021-01-22Merge tag 'mmc-v5.11-rc3' of ↵Linus Torvalds4-7/+37
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Fix initialization of block size when ext_csd isn't present MMC host: - sdhci-brcmstb: Fix mmc timeout errors on S5 suspend - sdhci-of-dwcmshc: Fix request accessing RPMB - sdhci-xenon: Fix 1.8v regulator stabilization" * tag 'mmc-v5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: core: don't initialize block size from ext_csd if not present mmc: sdhci-brcmstb: Fix mmc timeout errors on S5 suspend mmc: sdhci-xenon: fix 1.8v regulator stabilization mmc: sdhci-of-dwcmshc: fix rpmb access
2021-01-22Merge tag 'platform-drivers-x86-v5.11-2' of ↵Linus Torvalds9-24/+72
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "A small collection of bug-fixes and model-specific quirks" * tag 'platform-drivers-x86-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: thinkpad_acpi: Add P53/73 firmware to fan_quirk_table for dual fan control platform/x86: hp-wmi: Don't log a warning on HPWMI_RET_UNKNOWN_COMMAND errors platform/x86: intel-vbtn: Drop HP Stream x360 Convertible PC 11 from allow-list platform/x86: ideapad-laptop: Disable touchpad_switch for ELAN0634 platform/x86: amd-pmc: Fix CONFIG_DEBUG_FS check platform/x86: thinkpad_acpi: correct palmsensor error checking platform/x86: intel-vbtn: Support for tablet mode on Dell Inspiron 7352 platform/x86: touchscreen_dmi: Add swap-x-y quirk for Goodix touchscreen on Estar Beauty HD tablet platform/x86: i2c-multi-instantiate: Don't create platform device for INT3515 ACPI nodes platform/surface: SURFACE_PLATFORMS should depend on ACPI platform/surface: surface_gpe: Fix non-PM_SLEEP build warnings tools/power/x86/intel-speed-select: Set higher of cpuinfo_max_freq or base_frequency tools/power/x86/intel-speed-select: Set scaling_max_freq to base_frequency
2021-01-22Merge tag 'optee-rcu-sched-trace-for-v5.11' of ↵Arnd Bergmann1-1/+3
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes Fix rcu_sched trace from OP-TEE invoke Replaces might_sleep() with a conditional call to cond_resched() in order to avoid the rcu_sched trace in some corner cases. * tag 'optee-rcu-sched-trace-for-v5.11' of git://git.linaro.org/people/jens.wiklander/linux-tee: tee: optee: replace might_sleep with cond_resched Link: https://lore.kernel.org/r/20210122074234.GA1074747@jade Signed-off-by: Arnd Bergmann <[email protected]>
2021-01-22regulator: Fix lockdep warning resolving suppliesMark Brown1-12/+17
With commit eaa7995c529b54 (regulator: core: avoid regulator_resolve_supply() race condition) we started holding the rdev lock while resolving supplies, an operation that requires holding the regulator_list_mutex. This results in lockdep warnings since in other places we take the list mutex then the mutex on an individual rdev. Since the goal is to make sure that we don't call set_supply() twice rather than a concern about the cost of resolution pull the rdev lock and check for duplicate resolution down to immediately before we do the set_supply() and drop it again once the allocation is done. Fixes: eaa7995c529b54 (regulator: core: avoid regulator_resolve_supply() race condition) Reported-by: Marek Szyprowski <[email protected]> Tested-by: Marek Szyprowski <[email protected]> Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2021-01-22misc: rtsx: init value of aspm_enabledRicky Wu1-1/+6
make sure ASPM state sync with pcr->aspm_enabled init value pcr->aspm_enabled Cc: [email protected] Signed-off-by: Ricky Wu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Fixes: d928061c3143 ("misc: rtsx: modify en/disable aspm function") Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-01-22tty: fix up hung_up_tty_write() conversionLinus Torvalds1-4/+5
In commit "tty: implement write_iter", I left the write_iter conversion of the hung up tty case alone, because I incorrectly thought it didn't matter. Jiri showed me the errors of my ways, and pointed out the problems with that incomplete conversion. Fix it all up. Reported-by: Jiri Slaby <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Reviewed-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/r/CAHk-=wh+-rGsa=xruEWdg_fJViFG8rN9bpLrfLz=_yBYh2tBhA@mail.gmail.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-01-22i2c: sprd: depend on COMMON_CLK to fix compile testsKrzysztof Kozlowski1-0/+1
The I2C_SPRD uses Common Clock Framework thus it cannot be built on platforms without it (e.g. compile test on MIPS with LANTIQ): /usr/bin/mips-linux-gnu-ld: drivers/i2c/busses/i2c-sprd.o: in function `sprd_i2c_probe': i2c-sprd.c:(.text.sprd_i2c_probe+0x254): undefined reference to `clk_set_parent' Fixes: 4a2d5f663dab ("i2c: Enable compile testing for more drivers") Reported-by: kernel test robot <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Baolin Wang <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2021-01-22Revert "i2c: imx: Remove unused .id_table support"Fabio Estevam1-1/+19
Coldfire platforms are non-DT users of this driver, so keep the .id_table support. This reverts commit c610199cd392e6e2d41811ef83d85355c1b862b3. Fixes: c610199cd392 (i2c: imx: Remove unused .id_table support") Reported-by: Sascha Hauer <[email protected]> Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2021-01-22crypto: marvel/cesa - Fix tdma descriptor on 64-bitHerbert Xu1-2/+2
The patch that added src_dma/dst_dma to struct mv_cesa_tdma_desc is broken on 64-bit systems as the size of the descriptor has been changed. This patch fixes it by using u32 instead of dma_addr_t. Fixes: e62291c1d9f4 ("crypto: marvell/cesa - Fix sparse warnings") Cc: <[email protected]> Reported-by: Sven Auhagen <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2021-01-21Merge tag 'for-linus' of git://github.com/openrisc/linuxLinus Torvalds1-1/+2
Pull OpenRISC fixes from Stafford Horne: - Compiler warning fixup for new Litex SoC driver - Sparse warning fixup for iounmap * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: io: Add missing __iomem annotation to iounmap() soc: litex: Fix compile warning when device tree is not configured
2021-01-21Merge tag 'drm-fixes-2021-01-22' of git://anongit.freedesktop.org/drm/drmLinus Torvalds24-90/+198
Pull drm fixes from Dave Airlie: "Regular fixes pull, nothing too major in here, just some core fixes, one vc4, bunch of i915 and a bunch of amdgpu. core: - atomic: Release state on error - syncobj: Fix use-after-free - ttm: Don't use GFP_TRANSHUGE_LIGTH - vram-helper: Fix memory leak in vmap vc4: - Unify driver naming for PCM i915: - HDCP fixes - PMU wakeref fix - Fix HWSP validity race - Fix DP protocol converter accidental 4:4:4->4:2:0 conversion for RGB amdgpu: - Green Sardine fixes - Vangogh fixes - Renoir fixes - Misc display fixes" * tag 'drm-fixes-2021-01-22' of git://anongit.freedesktop.org/drm/drm: (21 commits) drm/amdgpu: update mmhub mgcg&ls for mmhub_v2_3 drm/amdgpu: modify GCR_GENERAL_CNTL for Vangogh drm/amdgpu/pm: no need GPU status set since mmnbif_gpu_BIF_DOORBELL_FENCE_CNTL added in FSDL drm/amd/display: Fixed corruptions on HPDRX link loss restore drm/amd/display: Use hardware sequencer functions for PG control drm/amd/display: Change function decide_dp_link_settings to avoid infinite looping drm/amd/display: Allow PSTATE chnage when no displays are enabled drm/amd/display: Update dram_clock_change_latency for DCN2.1 drm/amdgpu: remove gpu info firmware of green sardine drm/amd/display: DCN2X Find Secondary Pipe properly in MPO + ODM Case drm/syncobj: Fix use-after-free drm/vram-helper: Reuse existing page mappings in vmap drm/atomic: put state on error path drm/i915: Only enable DFP 4:4:4->4:2:0 conversion when outputting YCbCr 4:4:4 drm/i915: Check for rq->hwsp validity after acquiring RCU lock drm/i915/pmu: Don't grab wakeref when enabling events drm/i915/gt: Prevent use of engine->wa_ctx after error drm/vc4: Unify PCM card's driver_name drm/ttm: stop using GFP_TRANSHUGE_LIGHT drm/i915/hdcp: Get conn while content_type changed ...
2021-01-22Merge tag 'amd-drm-fixes-5.11-2021-01-21' of ↵Dave Airlie10-40/+100
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.11-2021-01-21: amdgpu: - Green Sardine fixes - Vangogh fixes - Renoir fixes - Misc display fixes Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-01-22Merge tag 'drm-intel-fixes-2021-01-21' of ↵Dave Airlie9-38/+74
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.11-rc5: - HDCP fixes - PMU wakeref fix - Fix HWSP validity race - Fix DP protocol converter accidental 4:4:4->4:2:0 conversion for RGB Signed-off-by: Dave Airlie <[email protected]> From: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-01-21dm: avoid filesystem lookup in dm_get_dev_t()Hannes Reinecke1-3/+12
This reverts commit 644bda6f3460 ("dm table: fall back to getting device using name_to_dev_t()") dm_get_dev_t() is just used to convert an arbitrary 'path' string into a dev_t. It doesn't presume that the device is present; that check will be done later, as the only caller is dm_get_device(), which does a dm_get_table_device() later on, which will properly open the device. So if the path string already _is_ in major:minor representation we can convert it directly, avoiding a recursion into the filesystem to lookup the block device. This avoids a hang in multipath_message() when the filesystem is inaccessible. Fixes: 644bda6f3460 ("dm table: fall back to getting device using name_to_dev_t()") Cc: [email protected] Signed-off-by: Hannes Reinecke <[email protected]> Signed-off-by: Martin Wilck <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2021-01-21dm crypt: fix copy and paste bug in crypt_alloc_req_aeadIgnat Korchagin1-3/+3
In commit d68b29584c25 ("dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq") code was incorrectly copy and pasted from crypt_alloc_req_skcipher()'s crypto request allocation code to crypt_alloc_req_aead(). It is OK from runtime perspective as both simple encryption request pointer and AEAD request pointer are part of a union, but may confuse code reviewers. Fixes: d68b29584c25 ("dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq") Cc: [email protected] # v5.9+ Reported-by: Pavel Machek <[email protected]> Signed-off-by: Ignat Korchagin <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2021-01-21dm integrity: conditionally disable "recalculate" featureMikulas Patocka1-2/+24
Otherwise a malicious user could (ab)use the "recalculate" feature that makes dm-integrity calculate the checksums in the background while the device is already usable. When the system restarts before all checksums have been calculated, the calculation continues where it was interrupted even if the recalculate feature is not requested the next time the dm device is set up. Disable recalculating if we use internal_hash or journal_hash with a key (e.g. HMAC) and we don't have the "legacy_recalculate" flag. This may break activation of a volume, created by an older kernel, that is not yet fully recalculated -- if this happens, the user should add the "legacy_recalculate" flag to constructor parameters. Cc: [email protected] Signed-off-by: Mikulas Patocka <[email protected]> Reported-by: Daniel Glockner <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2021-01-21dm integrity: fix a crash if "recalculate" used without "internal_hash"Mikulas Patocka1-0/+6
Recalculate can only be specified with internal_hash. Cc: [email protected] # v4.19+ Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2021-01-21Merge tag 'acpi-5.11-rc5' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Modify a helper function in the ACPI core to match the behavior expected by its users so as to prevent NULL pointer dereferences and occasional memory corruption from occurring (Hans de Goede)" * tag 'acpi-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: scan: Make acpi_bus_get_device() clear return pointer on error
2021-01-21Merge tag 'gpio-fixes-for-v5.11-rc5' of ↵Linus Torvalds4-84/+88
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - rework the character device code to avoid a frame size warning - fix printk format issues in gpio-tools - warn on redefinition of the to_irq callback in core gpiolib code - fix PWM period calculation in gpio-mvebu - make gpio-sifive Kconfig entry consistent with other drivers - fix a build issue in gpio-tegra * tag 'gpio-fixes-for-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: tegra: Add missing dependencies gpio: sifive: select IRQ_DOMAIN_HIERARCHY rather than depend on it gpio: mvebu: fix pwm .get_state period calculation gpiolib: add a warning on gpiochip->to_irq defined tools: gpio: fix %llu warning in gpio-watch.c tools: gpio: fix %llu warning in gpio-event-mon.c gpiolib: cdev: fix frame size warning in gpio_ioctl()
2021-01-21Merge tag 'pinctrl-v5.11-2' of ↵Linus Torvalds6-78/+107
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "These are all driver fixes, the Qualcomm stuff is the most widely used and important: - The main matter is a complicated fixup for the Qualcomm deep sleep states. This manifests in how interrupts get handled or in some cases not handled in cooperation with the PDC (Power Domain Controller). It's one of these really hardcore bug fixes that signifies high maturity of the platform. - Fix a register layout problem in the JZ4760 driver - Fix a register offset in the Aspeed G6 driver - Fix a compiler warning in the Nomadik driver - Fix a fallback code path in the mediatek driver" * tag 'pinctrl-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: qcom: Don't clear pending interrupts when enabling pinctrl: qcom: Properly clear "intr_ack_high" interrupts when unmasking pinctrl: qcom: No need to read-modify-write the interrupt status pinctrl: qcom: Allow SoCs to specify a GPIO function that's not 0 pinctrl: mediatek: Fix fallback call path pinctrl: nomadik: Remove unused variable in nmk_gpio_dbg_show_one pinctrl: aspeed: g6: Fix PWMG0 pinctrl setting pinctrl: ingenic: Rename registers from JZ4760_GPIO_* to JZ4770_GPIO_* pinctrl: ingenic: Fix JZ4760 support
2021-01-21driver core: Fix device link device name collisionSaravana Kannan1-12/+15
The device link device's name was of the form: <supplier-dev-name>--<consumer-dev-name> This can cause name collision as reported here [1] as device names are not globally unique. Since device names have to be unique within the bus/class, add the bus/class name as a prefix to the device names used to construct the device link device name. So the devuce link device's name will be of the form: <supplier-bus-name>:<supplier-dev-name>--<consumer-bus-name>:<consumer-dev-name> [1] - https://lore.kernel.org/lkml/[email protected]/ Fixes: 287905e68dd2 ("driver core: Expose device link details in sysfs") Cc: [email protected] Reported-by: Michael Walle <[email protected]> Tested-by: Michael Walle <[email protected]> Signed-off-by: Saravana Kannan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-01-21habanalabs: disable FW events on device removalOded Gabbay1-0/+9
When device is removed, we need to make sure the F/W won't send us any more events because during the remove process we disable the interrupts. Signed-off-by: Oded Gabbay <[email protected]>
2021-01-21habanalabs: fix backward compatibility of idle checkOded Gabbay1-0/+2
Need to take the lower 32 bits of the driver's 64-bit idle mask and put it in the legacy 32-bit variable that the userspace reads to know the idle mask. Signed-off-by: Oded Gabbay <[email protected]>
2021-01-21habanalabs: zero pci counters packet before submit to FWOfir Bitton1-0/+5
Driver does not zero some pci counters packets before sending to FW. This causes an out of sync PI/CI between driver and FW. Signed-off-by: Ofir Bitton <[email protected]> Reviewed-by: Oded Gabbay <[email protected]> Signed-off-by: Oded Gabbay <[email protected]>
2021-01-21intel_th: pci: Add Alder Lake-P supportAlexander Shishkin1-0/+5
This adds support for the Trace Hub in Alder Lake-P. Signed-off-by: Alexander Shishkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-01-21stm class: Fix module init return on allocation failureWang Hui1-2/+4
In stm_heartbeat_init(): return value gets reset after the first iteration by stm_source_register_device(), so allocation failures after that will, after a clean up, return success. Fix that. Fixes: 119291853038 ("stm class: Add heartbeat stm source device") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Wang Hui <[email protected]> Signed-off-by: Alexander Shishkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-01-21driver core: Extend device_is_dependent()Rafael J. Wysocki1-1/+16
If the device passed as the target (second argument) to device_is_dependent() is not completely registered (that is, it has been initialized, but not added yet), but the parent pointer of it is set, it may be missing from the list of the parent's children and device_for_each_child() called by device_is_dependent() cannot be relied on to catch that dependency. For this reason, modify device_is_dependent() to check the ancestors of the target device by following its parent pointer in addition to the device_for_each_child() walk. Fixes: 9ed9895370ae ("driver core: Functional dependencies tracking support") Reported-by: Stephan Gerhold <[email protected]> Tested-by: Stephan Gerhold <[email protected]> Reviewed-by: Saravana Kannan <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Link: https://lore.kernel.org/r/17705994.d592GUb2YH@kreacher Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-01-21drm/amdgpu: update mmhub mgcg&ls for mmhub_v2_3Aaron Liu1-23/+61
Starting from vangogh, the ATCL2 and DAGB0 registers relative to mgcg/ls has changed. For MGCG: Replace mmMM_ATC_L2_MISC_CG with mmMM_ATC_L2_CGTT_CLK_CTRL. For MGLS: Replace mmMM_ATC_L2_MISC_CG with mmMM_ATC_L2_CGTT_CLK_CTRL. Add DAGB0_(WR/RD)_CGTT_CLK_CTRL registers. Signed-off-by: Aaron Liu <[email protected]> Acked-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-01-21drm/amdgpu: modify GCR_GENERAL_CNTL for VangoghJinzhou Su1-1/+3
GCR_GENERAL_CNTL is defined differently in gc_10_1_0_offset.h and gc_10_3_0_offset.h. Update GCR_GENERAL_CNTL for Vangogh. Signed-off-by: Jinzhou Su <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-01-21drm/amdgpu/pm: no need GPU status set since ↵Prike Liang1-1/+1
mmnbif_gpu_BIF_DOORBELL_FENCE_CNTL added in FSDL In the renoir there is no need GpuChangeState message set to exit gfxoff in the s0i3 resume since mmnbif_gpu_BIF_DOORBELL_FENCE_CNTL has been added in the s0i3 FSDL. Signed-off-by: Prike Liang <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-01-21drm/amd/display: Fixed corruptions on HPDRX link loss restoreVladimir Stempen1-2/+2
[why] Heavy corruption or blank screen reported on wake, with 6k display connected and FEC enabled [how] When Disable/Enable stream for display pipes on HPDRX, DC should take into account ODM split pipes. Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Vladimir Stempen <[email protected]> Reviewed-by: Aric Cyr <[email protected]> Acked-by: Anson Jacob <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-01-21drm/amd/display: Use hardware sequencer functions for PG controlNicholas Kazlauskas2-6/+21
[Why & How] These can differ per ASIC or not be present. Don't call the dcn20 ones directly but rather the ones defined by the ASIC init table. Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Reviewed-by: Eric Yang <[email protected]> Acked-by: Anson Jacob <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-01-21drm/amd/display: Change function decide_dp_link_settings to avoid infinite ↵Bing Guo1-0/+3
looping Why: Function decide_dp_link_settings() loops infinitely when required bandwidth can't be supported. How: Check the required bandwidth against verified_link_cap before trying to find a link setting for it. Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Bing Guo <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Anson Jacob <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-01-21drm/amd/display: Allow PSTATE chnage when no displays are enabledAric Cyr1-2/+4
[Why] When no displays are currently enabled, display driver should not disallow PSTATE switching. [How] Allow PSTATE switching if either the active configuration supports it, or there are no active displays. Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Aric Cyr <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Anson Jacob <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-01-21drm/amd/display: Update dram_clock_change_latency for DCN2.1Jake Wang1-1/+1
[WHY] dram clock change latencies get updated using ddr4 latency table, but that update does not happen before validation. This value should not be the default and should be number received from df for better mode support. This may cause a PState hang on high refresh panels with short vblanks such as on 1080p 360hz or 300hz panels. [HOW] Update latency from 23.84 to 11.72. Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Jake Wang <[email protected]> Reviewed-by: Sung Lee <[email protected]> Acked-by: Anson Jacob <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.