aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2020-04-24efi/libstub/arm64: Switch to ordinary page allocator for kernel imageArd Biesheuvel1-2/+2
It is no longer necessary to locate the kernel as low as possible in physical memory, and so we can switch from efi_low_alloc() [which is a rather nasty concoction on top of GetMemoryMap()] to a new helper called efi_allocate_pages_aligned(), which simply rounds up the size to account for the alignment, and frees the misaligned pages again. So considering that the kernel can live anywhere in the physical address space, as long as its alignment requirements are met, let's switch to efi_allocate_pages_aligned() to allocate the pages. Signed-off-by: Ard Biesheuvel <[email protected]>
2020-04-24efi/libstub: Add API function to allocate aligned memoryArd Biesheuvel4-17/+71
Break out the code to create an aligned page allocation from mem.c and move it into a function efi_allocate_pages_aligned() in alignedmem.c. Update efi_allocate_pages() to invoke it unless the minimum alignment equals the EFI page size (4 KB), in which case the ordinary page allocator is sufficient. This way, efi_allocate_pages_aligned() will only be pulled into the build if it is actually being used (which will be on arm64 only in the immediate future) Signed-off-by: Ard Biesheuvel <[email protected]>
2020-04-23efi/libstub/arm64: Simplify randomized loading of kernel imageArd Biesheuvel1-27/+5
The KASLR code path in the arm64 version of the EFI stub incorporates some overly complicated logic to randomly allocate a region of the right alignment: there is no need to randomize the placement of the kernel modulo 2 MiB separately from the placement of the 2 MiB aligned allocation itself - we can simply follow the same logic used by the non-randomized placement, which is to allocate at the correct alignment, and only take TEXT_OFFSET into account if it is not a round multiple of the alignment. Signed-off-by: Ard Biesheuvel <[email protected]>
2020-04-23efi/libstub/arm64: Replace 'preferred' offset with alignment checkArd Biesheuvel1-37/+25
The notion of a 'preferred' load offset for the kernel dates back to the times when the kernel's primary mapping overlapped with the linear region, and memory below it could not be used at all. Today, the arm64 kernel does not really care where it is loaded in physical memory, as long as the alignment requirements are met, and so there is no point in unconditionally moving the kernel to a new location in memory at boot. Instead, we can - check for a KASLR seed, and randomly reallocate the kernel if one is provided - otherwise, check whether the alignment requirements are met for the current placement of the kernel, and just run it in place if they are - finally, do an ordinary page allocation and reallocate the kernel to a suitably aligned buffer anywhere in memory. By the same reasoning, there is no need to take TEXT_OFFSET into account if it is a round multiple of the minimum alignment, which is the usual case for relocatable kernels with TEXT_OFFSET randomization disabled. Otherwise, it suffices to use the relative misaligment of TEXT_OFFSET when reallocating the kernel. Signed-off-by: Ard Biesheuvel <[email protected]>
2020-04-23efi/libstub/random: Increase random alloc granularityArd Biesheuvel1-1/+1
The implementation of efi_random_alloc() arbitrarily truncates the provided random seed to 16 bits, which limits the granularity of the randomly chosen allocation offset in memory. This is currently only an issue if the size of physical memory exceeds 128 GB, but going forward, we will reduce the allocation alignment to 64 KB, and this means we need to increase the granularity to ensure that the random memory allocations are distributed evenly. We will need to switch to 64-bit arithmetic for the multiplication, but this does not result in 64-bit integer intrinsic calls on ARM or on i386. Signed-off-by: Ard Biesheuvel <[email protected]>
2020-04-23efi/libstub/random: Align allocate size to EFI_ALLOC_ALIGNArd Biesheuvel1-1/+3
The EFI stub uses a per-architecture #define for the minimum base and size alignment of page allocations, which is set to 4 KB for all architecures except arm64, which uses 64 KB, to ensure that allocations can always be (un)mapped efficiently, regardless of the page size used by the kernel proper, which could be a kexec'ee The API wrappers around page based allocations assume that this alignment is always taken into account, and so efi_free() will also round up its size argument to EFI_ALLOC_ALIGN. Currently, efi_random_alloc() does not honour this alignment for the allocated size, and so freeing such an allocation may result in unrelated memory to be freed, potentially leading to issues after boot. So let's round up size in efi_random_alloc() as well. Fixes: 2ddbfc81eac84a29 ("efi: stub: add implementation of efi_random_alloc()") Signed-off-by: Ard Biesheuvel <[email protected]>
2020-04-23efi/gop: Allow automatically choosing the best modeArvind Sankar1-1/+83
Add the ability to automatically pick the highest resolution video mode (defined as the product of vertical and horizontal resolution) by using a command-line argument of the form video=efifb:auto If there are multiple modes with the highest resolution, pick one with the highest color depth. Signed-off-by: Arvind Sankar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ard Biesheuvel <[email protected]>
2020-04-23efi/gop: Allow specifying depth as well as resolutionArvind Sankar1-5/+43
Extend the video mode argument to handle an optional color depth specification of the form video=efifb:<xres>x<yres>[-(rgb|bgr|<bpp>)] Signed-off-by: Arvind Sankar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ard Biesheuvel <[email protected]>
2020-04-23efi/gop: Allow specifying mode by <xres>x<yres>Arvind Sankar1-1/+83
Add the ability to choose a video mode using a command-line argument of the form video=efifb:<xres>x<yres> Signed-off-by: Arvind Sankar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ard Biesheuvel <[email protected]>
2020-04-23efi/gop: Allow specifying mode number on command lineArvind Sankar3-0/+112
Add the ability to choose a video mode for the selected gop by using a command-line argument of the form video=efifb:mode=<n> Signed-off-by: Arvind Sankar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ard Biesheuvel <[email protected]>
2020-04-23efi/gop: Add prototypes for query_mode and set_modeArvind Sankar1-2/+4
Add prototypes and argmap for the Graphics Output Protocol's QueryMode and SetMode functions. Signed-off-by: Arvind Sankar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ard Biesheuvel <[email protected]>
2020-04-23efi/gop: Remove unreachable code from setup_pixel_infoArvind Sankar1-40/+26
pixel_format must be one of PIXEL_RGB_RESERVED_8BIT_PER_COLOR PIXEL_BGR_RESERVED_8BIT_PER_COLOR PIXEL_BIT_MASK since we skip PIXEL_BLT_ONLY when finding a gop. Remove the redundant code and add another check in find_gop to skip any pixel formats that we don't know about, in case a later version of the UEFI spec adds one. Reformat the code a little. Signed-off-by: Arvind Sankar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ard Biesheuvel <[email protected]>
2020-04-23efi/gop: Use helper macros for find_bitsArvind Sankar1-18/+8
Use the __ffs/__fls macros to calculate the position and size of the mask. Correct type of mask to u32 instead of unsigned long. Signed-off-by: Arvind Sankar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ard Biesheuvel <[email protected]>
2020-04-23efi/gop: Use helper macros for populating lfb_baseArvind Sankar1-2/+2
Use the lower/upper_32_bits macros from kernel.h to initialize si->lfb_base and si->ext_lfb_base. Signed-off-by: Arvind Sankar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ard Biesheuvel <[email protected]>
2020-04-23efi/gop: Move variable declarations into loop blockArvind Sankar1-5/+8
Declare the variables inside the block where they're used. Get rid of a couple of redundant initializers. Signed-off-by: Arvind Sankar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ard Biesheuvel <[email protected]>
2020-04-23efi/gop: Slightly re-arrange logic of find_gopArvind Sankar1-17/+13
Small cleanup to get rid of conout_found. Signed-off-by: Arvind Sankar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ard Biesheuvel <[email protected]>
2020-04-23efi/gop: Factor out locating the gop into a functionArvind Sankar1-6/+17
Move the loop to find a gop into its own function. Signed-off-by: Arvind Sankar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ard Biesheuvel <[email protected]>
2020-04-23efi/gop: Get mode information outside the loopArvind Sankar1-24/+14
Move extraction of the mode information parameters outside the loop to find the gop, and eliminate some redundant variables. Signed-off-by: Arvind Sankar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ard Biesheuvel <[email protected]>
2020-04-23efi/gop: Move check for framebuffer before con_outArvind Sankar1-5/+6
If the gop doesn't have a framebuffer, there's no point in checking for con_out support. Signed-off-by: Arvind Sankar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ard Biesheuvel <[email protected]>
2020-04-23efi/gop: Remove redundant current_fb_baseArvind Sankar1-3/+1
current_fb_base isn't used for anything except assigning to fb_base if we locate a suitable gop. Signed-off-by: Arvind Sankar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ard Biesheuvel <[email protected]>
2020-04-23efi/libstub/arm: Make install_memreserve_table staticZou Wei1-1/+1
Fix the following sparse warning: drivers/firmware/efi/libstub/arm-stub.c:68:6: warning: symbol 'install_memreserve_table' was not declared. Should it be static? Reported-by: Hulk Robot <[email protected]> Signed-off-by: Zou Wei <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ard Biesheuvel <[email protected]>
2020-04-23efi/libstub: unify EFI call wrappers for non-x86Ard Biesheuvel1-0/+16
We have wrappers around EFI calls so that x86 can define special versions for mixed mode, while all other architectures can use the same simple definition that just issues the call directly. In preparation for the arrival of yet another architecture that doesn't need anything special here (RISC-V), let's move the default definition into a shared header. Signed-off-by: Ard Biesheuvel <[email protected]>
2020-04-23efi/libstub: Make initrd file loader configurableArd Biesheuvel3-34/+47
Loading an initrd passed via the kernel command line is deprecated: it is limited to files that reside in the same volume as the one the kernel itself was loaded from, and we have more flexible ways to achieve the same. So make it configurable so new architectures can decide not to enable it. Signed-off-by: Ard Biesheuvel <[email protected]>
2020-04-23efi/libstub: Move arm-stub to a common fileAtish Patra3-8/+8
Most of the arm-stub code is written in an architecture independent manner. As a result, RISC-V can reuse most of the arm-stub code. Rename the arm-stub.c to efi-stub.c so that ARM, ARM64 and RISC-V can use it. This patch doesn't introduce any functional changes. Signed-off-by: Atish Patra <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ard Biesheuvel <[email protected]>
2020-04-19Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds5-41/+35
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "Two build fixes for a couple clk drivers and a fix for the Unisoc serial clk where we want to keep it on for earlycon" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: sprd: don't gate uart console clock clk: mmp2: fix link error without mmp2 clk: asm9260: fix __clk_hw_register_fixed_rate_with_accuracy typo
2020-04-19Merge tag 'irq-urgent-2020-04-19' of ↵Linus Torvalds8-17/+49
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of fixes/updates for the interrupt subsystem: - Remove setup_irq() and remove_irq(). All users have been converted so remove them before new users surface. - A set of bugfixes for various interrupt chip drivers - Add a few missing static attributes to address sparse warnings" * tag 'irq-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/irq-bcm7038-l1: Make bcm7038_l1_of_init() static irqchip/irq-mvebu-icu: Make legacy_bindings static irqchip/meson-gpio: Fix HARDIRQ-safe -> HARDIRQ-unsafe lock order irqchip/sifive-plic: Fix maximum priority threshold value irqchip/ti-sci-inta: Fix processing of masked irqs irqchip/mbigen: Free msi_desc on device teardown irqchip/gic-v4.1: Update effective affinity of virtual SGIs irqchip/gic-v4.1: Add support for VPENDBASER's Dirty+Valid signaling genirq: Remove setup_irq() and remove_irq()
2020-04-18Merge tag 'scsi-fixes' of ↵Linus Torvalds8-9/+10
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Seven fixes: three in target, one on a sg error leg, two in qla2xxx fixing warnings introduced in the last merge window and updating MAINTAINERS and one in hisi_sas fixing a problem introduced by libata" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sg: add sg_remove_request in sg_common_write scsi: target: tcmu: reset_ring should reset TCMU_DEV_BIT_BROKEN scsi: target: fix PR IN / READ FULL STATUS for FC scsi: target: Write NULL to *port_nexus_ptr if no ISID scsi: MAINTAINERS: Update qla2xxx FC-SCSI driver maintainer scsi: qla2xxx: Fix regression warnings scsi: hisi_sas: Fix build error without SATA_HOST
2020-04-18Merge tag 'hwmon-for-v5.7-rc2' of ↵Linus Torvalds5-12/+96
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Fix up chip IDs (isl68137) - error handling for invalid temperatures and use true module name (drivetemp) - Fix static symbol warnings (k10temp) - Use valid hwmon device name (jc42) * tag 'hwmon-for-v5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (jc42) Fix name to have no illegal characters hwmon: (k10temp) make some symbols static hwmon: (drivetemp) Return -ENODATA for invalid temperatures hwmon: (drivetemp) Use drivetemp's true module name in Kconfig section hwmon: (pmbus/isl68137) Fix up chip IDs
2020-04-18Merge branch 'i2c/for-current' of ↵Linus Torvalds4-34/+38
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Some driver bugfixes and an old API removal now that all users are gone" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: tegra: Synchronize DMA before termination i2c: tegra: Better handle case where CPU0 is busy for a long time i2c: remove i2c_new_probed_device API i2c: altera: use proper variable to hold errno i2c: designware: platdrv: Remove DPM_FLAG_SMART_SUSPEND flag on BYT and CHT
2020-04-18Merge tag 'drm-fixes-2020-04-18' of git://anongit.freedesktop.org/drm/drmLinus Torvalds13-94/+85
Pull drm fixes from Dave Airlie: "Quiet enough for rc2, mostly amdgpu fixes, a couple of i915 fixes, and one nouveau module firmware fix: i915: - Fix guest page access by using the brand new VFIO dma r/w interface (Yan) - Fix for i915 perf read buffers (Ashutosh) amdgpu: - gfx10 fix - SMU7 overclocking fix - RAS fix - GPU reset fix - Fix a regression in a previous suspend/resume fix - Add a gfxoff quirk nouveau: - fix missing MODULE_FIRMWARE" * tag 'drm-fixes-2020-04-18' of git://anongit.freedesktop.org/drm/drm: drm/nouveau/sec2/gv100-: add missing MODULE_FIRMWARE() drm/amdgpu/gfx9: add gfxoff quirk drm/amdgpu: fix the hw hang during perform system reboot and reset drm/i915/gvt: switch to user vfio_group_pin/upin_pages drm/i915/gvt: subsitute kvm_read/write_guest with vfio_dma_rw drm/i915/gvt: hold reference of VFIO group during opening of vgpu drm/i915/perf: Do not clear pollin for small user read buffers drm/amdgpu: fix wrong vram lost counter increment V2 drm/amd/powerplay: unload mp1 for Arcturus RAS baco reset drm/amd/powerplay: force the trim of the mclk dpm_levels if OD is enabled Revert "drm/amdgpu: change SH MEM alignment mode for gfx10"
2020-04-18hwmon: (jc42) Fix name to have no illegal charactersSascha Hauer1-1/+1
The jc42 driver passes I2C client's name as hwmon device name. In case of device tree probed devices this ends up being part of the compatible string, "jc-42.4-temp". This name contains hyphens and the hwmon core doesn't like this: jc42 2-0018: hwmon: 'jc-42.4-temp' is not a valid name attribute, please fix This changes the name to "jc42" which doesn't have any illegal characters. Signed-off-by: Sascha Hauer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2020-04-17Merge tag 'mtd/fixes-for-5.7-rc2' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd fix from Richard Weinberger: "spi-nor: fix for missing directory after code refactoring" * tag 'mtd/fixes-for-5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: spi-nor: Compile files in controllers/ directory
2020-04-17Merge tag 'linux-watchdog-5.7-rc2' of ↵Linus Torvalds1-0/+4
git://www.linux-watchdog.org/linux-watchdog Pull watchdog fix from Wim Van Sebroeck: "Fix restart handler in sp805 driver" * tag 'linux-watchdog-5.7-rc2' of git://www.linux-watchdog.org/linux-watchdog: watchdog: sp805: fix restart handler
2020-04-17Merge tag 'devicetree-fixes-for-5.7' of ↵Linus Torvalds3-13/+40
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Fix warnings from enabling more dtc warnings which landed in the merge window and didn't get fixed in time. - Fix some document references from DT schema conversions - Fix kmemleak errors in DT unittests * tag 'devicetree-fixes-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (23 commits) kbuild: check libyaml installation for 'make dt_binding_check' of: unittest: kmemleak in duplicate property update of: overlay: kmemleak in dup_and_fixup_symbol_prop() of: unittest: kmemleak in of_unittest_overlay_high_level() of: unittest: kmemleak in of_unittest_platform_populate() of: unittest: kmemleak on changeset destroy MAINTAINERS: dt: fix pointers for ARM Integrator, Versatile and RealView MAINTAINERS: dt: update display/allwinner file entry dt-bindings: iio: dac: AD5570R fix bindings errors dt-bindings: Fix misspellings of "Analog Devices" dt-bindings: pwm: Fix cros-ec-pwm example dtc 'reg' warning docs: dt: rockchip,dwc3.txt: fix a pointer to a renamed file docs: dt: fix a broken reference for a file converted to json docs: dt: qcom,dwc3.txt: fix cross-reference for a converted file docs: dt: fix broken reference to phy-cadence-torrent.yaml dt-bindings: interrupt-controller: Fix loongson,parent_int_map property schema dt-bindings: hwmon: Fix incorrect $id paths dt-bindings: Fix dtc warnings on reg and ranges in examples dt-bindings: BD718x7 - add missing I2C bus properties dt-bindings: clock: syscon-icst: Remove unneeded unit name ...
2020-04-17Merge tag 'for-linus-5.7-rc2-tag' of ↵Linus Torvalds1-1/+8
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen update from Juergen Gross: - a small cleanup patch - a security fix for a bug in the Xen hypervisor to avoid enabling Xen guests to crash dom0 on an unfixed hypervisor. * tag 'for-linus-5.7-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: arm/xen: make _xen_start_info static xen/xenbus: ensure xenbus_map_ring_valloc() returns proper grant status
2020-04-17Merge tag 'block-5.7-2020-04-17' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+0
Pull block fixes from Jens Axboe: - Fix for a driver tag leak in error handling (John) - Remove now defunct Kconfig selection from dasd (Stefan) - blk-wbt trace fiexs (Tommi) * tag 'block-5.7-2020-04-17' of git://git.kernel.dk/linux-block: blk-wbt: Drop needless newlines from tracepoint format strings blk-wbt: Use tracepoint_string() for wbt_step tracepoint string literals s390/dasd: remove IOSCHED_DEADLINE from DASD Kconfig blk-mq: Put driver tag in blk_mq_dispatch_rq_list() when no budget
2020-04-17Merge tag 'libata-5.7-2020-04-17' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+1
Pull libata fixlet from Jens Axboe: "Add yet another Comet Lake PCI ID for ahci" * tag 'libata-5.7-2020-04-17' of git://git.kernel.dk/linux-block: ahci: Add Intel Comet Lake PCH-U PCI ID
2020-04-17Merge tag 'pm-5.7-rc2' of ↵Linus Torvalds1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management update from Rafael Wysocki: "Allow the operating performance points (OPP) core to be used in the case when the same driver is used on different platforms, some of which have an OPP table and some of which have a clock node (Rajendra Nayak)" * tag 'pm-5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: opp: Manage empty OPP tables with clk handle
2020-04-17s390/dasd: remove IOSCHED_DEADLINE from DASD KconfigStefan Haberland1-1/+0
CONFIG_IOSCHED_DEADLINE was removed with commit f382fb0bcef4 ("block: remove legacy IO schedulers") and setting of the scheduler was removed with commit a5fd8ddce2af ("s390/dasd: remove setting of scheduler from driver"). So get rid of the select. Reported-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Stefan Haberland <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-04-17of: unittest: kmemleak in duplicate property updateFrank Rowand2-10/+25
kmemleak reports several memory leaks from devicetree unittest. This is the fix for problem 5 of 5. When overlay 'overlay_bad_add_dup_prop' is applied, the apply code properly detects that a memory leak will occur if the overlay is removed since the duplicate property is located in a base devicetree node and reports via printk(): OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/motor-1/rpm_avail OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/motor-1/rpm_avail The overlay is removed when the apply code detects multiple changesets modifying the same property. This is reported via printk(): OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/rpm_avail As a result of this error, the overlay is removed resulting in the expected memory leak. Add another device node level to the overlay so that the duplicate property is located in a node added by the overlay, thus no memory leak will occur when the overlay is removed. Thus users of kmemleak will not have to debug this leak in the future. Fixes: 2fe0e8769df9 ("of: overlay: check prevents multiple fragments touching same property") Reported-by: Erhard F. <[email protected]> Signed-off-by: Frank Rowand <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2020-04-17of: overlay: kmemleak in dup_and_fixup_symbol_prop()Frank Rowand1-0/+2
kmemleak reports several memory leaks from devicetree unittest. This is the fix for problem 4 of 5. target_path was not freed in the non-error path. Fixes: e0a58f3e08d4 ("of: overlay: remove a dependency on device node full_name") Reported-by: Erhard F. <[email protected]> Signed-off-by: Frank Rowand <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2020-04-17of: unittest: kmemleak in of_unittest_overlay_high_level()Frank Rowand1-1/+4
kmemleak reports several memory leaks from devicetree unittest. This is the fix for problem 3 of 5. of_unittest_overlay_high_level() failed to kfree the newly created property when the property named 'name' is skipped. Fixes: 39a751a4cb7e ("of: change overlay apply input data from unflattened to FDT") Reported-by: Erhard F. <[email protected]> Signed-off-by: Frank Rowand <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2020-04-17of: unittest: kmemleak in of_unittest_platform_populate()Frank Rowand1-2/+5
kmemleak reports several memory leaks from devicetree unittest. This is the fix for problem 2 of 5. of_unittest_platform_populate() left an elevated reference count for grandchild nodes (which are platform devices). Fix the platform device reference counts so that the memory will be freed. Fixes: fb2caa50fbac ("of/selftest: add testcase for nodes with same name and address") Reported-by: Erhard F. <[email protected]> Signed-off-by: Frank Rowand <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2020-04-17of: unittest: kmemleak on changeset destroyFrank Rowand1-0/+4
kmemleak reports several memory leaks from devicetree unittest. This is the fix for problem 1 of 5. of_unittest_changeset() reaches deeply into the dynamic devicetree functions. Several nodes were left with an elevated reference count and thus were not properly cleaned up. Fix the reference counts so that the memory will be freed. Fixes: 201c910bd689 ("of: Transactional DT support.") Reported-by: Erhard F. <[email protected]> Signed-off-by: Frank Rowand <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2020-04-17Merge branch 'irq/gic-v4.1-fixes-5.7' into irq/irqchip-5.7Marc Zyngier2-4/+27
2020-04-17irqchip/irq-bcm7038-l1: Make bcm7038_l1_of_init() staticJason Yan1-1/+1
Fix the following sparse warning: drivers/irqchip/irq-bcm7038-l1.c:419:12: warning: symbol 'bcm7038_l1_of_init' was not declared. Should it be static? Reported-by: Hulk Robot <[email protected]> Signed-off-by: Jason Yan <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-04-17irqchip/irq-mvebu-icu: Make legacy_bindings staticJason Yan1-1/+1
Fix the following sparse warning: drivers/irqchip/irq-mvebu-icu.c:69:1: warning: symbol 'legacy_bindings' was not declared. Should it be static? Reported-by: Hulk Robot <[email protected]> Signed-off-by: Jason Yan <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-04-17irqchip/meson-gpio: Fix HARDIRQ-safe -> HARDIRQ-unsafe lock orderMarc Zyngier1-8/+10
Running a lockedp-enabled kernel on a vim3l board (Amlogic SM1) leads to the following splat: [ 13.557138] WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected [ 13.587485] ip/456 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 13.625922] ffff000059908cf0 (&irq_desc_lock_class){-.-.}-{2:2}, at: __setup_irq+0xf8/0x8d8 [ 13.632273] which would create a new lock dependency: [ 13.637272] (&irq_desc_lock_class){-.-.}-{2:2} -> (&ctl->lock){+.+.}-{2:2} [ 13.644209] [ 13.644209] but this new dependency connects a HARDIRQ-irq-safe lock: [ 13.654122] (&irq_desc_lock_class){-.-.}-{2:2} [ 13.654125] [ 13.654125] ... which became HARDIRQ-irq-safe at: [ 13.664759] lock_acquire+0xec/0x368 [ 13.666926] _raw_spin_lock+0x60/0x88 [ 13.669979] handle_fasteoi_irq+0x30/0x178 [ 13.674082] generic_handle_irq+0x38/0x50 [ 13.678098] __handle_domain_irq+0x6c/0xc8 [ 13.682209] gic_handle_irq+0x5c/0xb0 [ 13.685872] el1_irq+0xd0/0x180 [ 13.689010] arch_cpu_idle+0x40/0x220 [ 13.692732] default_idle_call+0x54/0x60 [ 13.696677] do_idle+0x23c/0x2e8 [ 13.699903] cpu_startup_entry+0x30/0x50 [ 13.703852] rest_init+0x1e0/0x2b4 [ 13.707301] arch_call_rest_init+0x18/0x24 [ 13.711449] start_kernel+0x4ec/0x51c [ 13.715167] [ 13.715167] to a HARDIRQ-irq-unsafe lock: [ 13.722426] (&ctl->lock){+.+.}-{2:2} [ 13.722430] [ 13.722430] ... which became HARDIRQ-irq-unsafe at: [ 13.732319] ... [ 13.732324] lock_acquire+0xec/0x368 [ 13.735985] _raw_spin_lock+0x60/0x88 [ 13.739452] meson_gpio_irq_domain_alloc+0xcc/0x290 [ 13.744392] irq_domain_alloc_irqs_hierarchy+0x24/0x60 [ 13.749586] __irq_domain_alloc_irqs+0x160/0x2f0 [ 13.754254] irq_create_fwspec_mapping+0x118/0x320 [ 13.759073] irq_create_of_mapping+0x78/0xa0 [ 13.763360] of_irq_get+0x6c/0x80 [ 13.766701] of_mdiobus_register_phy+0x10c/0x238 [of_mdio] [ 13.772227] of_mdiobus_register+0x158/0x380 [of_mdio] [ 13.777388] mdio_mux_init+0x180/0x2e8 [mdio_mux] [ 13.782128] g12a_mdio_mux_probe+0x290/0x398 [mdio_mux_meson_g12a] [ 13.788349] platform_drv_probe+0x5c/0xb0 [ 13.792379] really_probe+0xe4/0x448 [ 13.795979] driver_probe_device+0xe8/0x140 [ 13.800189] __device_attach_driver+0x94/0x120 [ 13.804639] bus_for_each_drv+0x84/0xd8 [ 13.808474] __device_attach+0xe4/0x168 [ 13.812361] device_initial_probe+0x1c/0x28 [ 13.816592] bus_probe_device+0xa4/0xb0 [ 13.820430] deferred_probe_work_func+0xa8/0x100 [ 13.825064] process_one_work+0x264/0x688 [ 13.829088] worker_thread+0x4c/0x458 [ 13.832768] kthread+0x154/0x158 [ 13.836018] ret_from_fork+0x10/0x18 [ 13.839612] [ 13.839612] other info that might help us debug this: [ 13.839612] [ 13.850354] Possible interrupt unsafe locking scenario: [ 13.850354] [ 13.855720] CPU0 CPU1 [ 13.858774] ---- ---- [ 13.863242] lock(&ctl->lock); [ 13.866330] local_irq_disable(); [ 13.872233] lock(&irq_desc_lock_class); [ 13.878705] lock(&ctl->lock); [ 13.884297] <Interrupt> [ 13.886857] lock(&irq_desc_lock_class); [ 13.891014] [ 13.891014] *** DEADLOCK *** The issue can occur when CPU1 is doing something like irq_set_type() and CPU0 performing an interrupt allocation, for example. Taking an interrupt (like the one being reconfigured) would lead to a deadlock. A solution to this is: - Reorder the locking so that meson_gpio_irq_update_bits takes the lock itself at all times, instead of relying on the caller to lock or not, hence making the RMW sequence atomic, - Rework the critical section in meson_gpio_irq_request_channel to only cover the allocation itself, and let the gpio_irq_sel_pin callback deal with its own locking if required, - Take the private spin-lock with interrupts disabled at all times Reviewed-by: Jerome Brunet <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>
2020-04-17irqchip/sifive-plic: Fix maximum priority threshold valueAtish Patra1-1/+1
As per the PLIC specification, maximum priority threshold value is 0x7 not 0xF. Even though it doesn't cause any error in qemu/hifive unleashed, there may be some implementation which checks the upper bound resulting in an illegal access. Fixes: ccbe80bad571 ("irqchip/sifive-plic: Enable/Disable external interrupts upon cpu online/offline") Signed-off-by: Atish Patra <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-04-17irqchip/ti-sci-inta: Fix processing of masked irqsGrygorii Strashko1-1/+2
The ti_sci_inta_irq_handler() does not take into account INTA IRQs state (masked/unmasked) as it uses INTA_STATUS_CLEAR_j register to get INTA IRQs status, which provides raw status value. This causes hard IRQ handlers to be called or threaded handlers to be scheduled many times even if corresponding INTA IRQ is masked. Above, first of all, affects the LEVEL interrupts processing and causes unexpected behavior up the system stack or crash. Fix it by using the Interrupt Masked Status INTA_STATUSM_j register which provides masked INTA IRQs status. Fixes: 9f1463b86c13 ("irqchip/ti-sci-inta: Add support for Interrupt Aggregator driver") Signed-off-by: Grygorii Strashko <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Reviewed-by: Lokesh Vutla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected]
Powered by cgit, Gruvboxed by Blaster4385.