aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-10-15drm/msm: remove unneeded variableChi Minghao1-3/+1
Fix the following coccicheck REVIEW: ./drivers/gpu/drm/msm/edp/edp_ctrl.c:1245:5-8 Unneeded variable Reported-by: Zeal Robot <[email protected]> Signed-off-by: Chi Minghao <[email protected]> Reviewed-by: Lyude Paul <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2021-10-15drm/msm: Change dpu_crtc_get_vblank_counter to use vsync count.Mark Yacoub3-19/+9
[why] vsync_cnt atomic counter increments for every hw vsync. On the other hand, frame count is a register that increments when the frame gets actually pushed out. We cannnot read this register whenever the timing engine is off, but vblank counter should still return a valid number. This behavior also matches the downstream driver. [How] Read the encoder vsync count instead of the dpu_encoder_phys frame count. Suggested-by: Abhinav Kumar <[email protected]> CC: Rob Clark <[email protected]> Signed-off-by: Mark Yacoub <[email protected]> Reviewed-by: Abhinav Kumar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2021-10-15drm/msm/dpu: merge struct dpu_irq into struct dpu_hw_intrDmitry Baryshkov3-41/+28
As dpu_core_irq was merged into dpu_hw_intr, merge data structures too, removing the need for a separate data structure. Signed-off-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Abhinav Kumar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2021-10-15drm/msm/dpu: don't clear IRQ register twiceDmitry Baryshkov1-17/+0
We already clear the IRQ status register before processing IRQs, so do not clear the register again. Especially do not clear the IRQ status _after_ processing the IRQ as this way we can loose the event. Signed-off-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Abhinav Kumar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2021-10-15drm/msm/dpu: squash dpu_core_irq into dpu_hw_interruptsDmitry Baryshkov4-399/+214
With dpu_core_irq being the wrapper around dpu_hw_interrupts, there is little sense in having them separate. Squash them together to remove another layer of abstraction (hw_intr ops). Signed-off-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Abhinav Kumar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2021-10-11drm/msm/dsi: fix off by one in dsi_bus_clk_enable error handlingDan Carpenter1-1/+1
This disables a lock which wasn't enabled and it does not disable the first lock in the array. Fixes: 6e0eb52eba9e ("drm/msm/dsi: Parse bus clocks from a list") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/20211001123409.GG2283@kili Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2021-10-11drm/msm/dsi: Fix an error code in msm_dsi_modeset_init()Dan Carpenter1-1/+3
Return an error code if msm_dsi_manager_validate_current_config(). Don't return success. Fixes: 8b03ad30e314 ("drm/msm/dsi: Use one connector for dual DSI mode") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/20211001123308.GF2283@kili Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2021-10-11drm/msm/dsi: dsi_phy_14nm: Take ready-bit into account in poll_for_readyMarijn Suijten1-15/+15
The downstream driver models this PLL lock check as an if-elseif-else. The only way to reach the else case where pll_locked=true [1] is by succeeding both readl_poll_timeout_atomic calls (which return zero on success) in the if _and_ elseif condition. Hence both the "lock" and "ready" bit need to be tested in the SM_READY_STATUS register before considering the PLL locked and ready to go. Tested on the Sony Xperia XA2 Ultra (nile-discovery, sdm630). [1]: https://source.codeaurora.org/quic/la/kernel/msm-4.19/tree/drivers/clk/qcom/mdss/mdss-dsi-pll-14nm-util.c?h=LA.UM.9.2.1.r1-08000-sdm660.0#n302 Fixes: f079f6d999cb ("drm/msm/dsi: Add PHY/PLL for 8x96") Signed-off-by: Marijn Suijten <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2021-10-11drm/msm/dsi/phy: fix clock names in 28nm_8960 phyDmitry Baryshkov1-2/+2
The commit 9f91f22aafcd ("drm/msm/dsi: remove duplicate fields from dsi_pll_Nnm instances") mistakenly changed registered clock names. While the platform is in progress of migration to using clock properties in the dts rather than the global clock names, we should provide backwards compatibility. Thus restore registerd global clock names. Fixes: 9f91f22aafcd ("drm/msm/dsi: remove duplicate fields from dsi_pll_Nnm instances") Signed-off-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Abhinav Kumar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2021-10-11drm/msm/dpu: Fix address of SM8150 PINGPONG5 IRQ registerRobert Foss1-1/+1
Both PINGPONG4 and PINGPONG5 IRQ registers are using the same address, which is incorrect. PINGPONG4 should use the register offset 30, and PINGPONG5 should use the register offset 31 according to the downstream driver. Fixes: 667e9985ee24 ("drm/msm/dpu: replace IRQ lookup with the data in hw catalog") Signed-off-by: Robert Foss <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2021-10-11drm/msm: Do not run snapshot on non-DPU devicesFabio Estevam1-4/+5
Since commit 98659487b845 ("drm/msm: add support to take dpu snapshot") the following NULL pointer dereference is seen on i.MX53: [ 3.275493] msm msm: bound 30000000.gpu (ops a3xx_ops) [ 3.287174] [drm] Initialized msm 1.8.0 20130625 for msm on minor 0 [ 3.293915] 8<--- cut here --- [ 3.297012] Unable to handle kernel NULL pointer dereference at virtual address 00000028 [ 3.305244] pgd = (ptrval) [ 3.307989] [00000028] *pgd=00000000 [ 3.311624] Internal error: Oops: 805 [#1] SMP ARM [ 3.316430] Modules linked in: [ 3.319503] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.14.0+g682d702b426b #1 [ 3.326652] Hardware name: Freescale i.MX53 (Device Tree Support) [ 3.332754] PC is at __mutex_init+0x14/0x54 [ 3.336969] LR is at msm_disp_snapshot_init+0x24/0xa0 i.MX53 does not use the DPU controller. Fix the problem by only calling msm_disp_snapshot_init() on platforms that use the DPU controller. Cc: [email protected] Fixes: 98659487b845 ("drm/msm: add support to take dpu snapshot") Signed-off-by: Fabio Estevam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Clark <[email protected]>
2021-10-11drm/msm/a3xx: fix error handling in a3xx_gpu_init()Dan Carpenter1-4/+5
These error paths returned 1 on failure, instead of a negative error code. This would lead to an Oops in the caller. A second problem is that the check for "if (ret != -ENODATA)" did not work because "ret" was set to 1. Fixes: 5785dd7a8ef0 ("drm/msm: Fix duplicate gpu node in icc summary") Signed-off-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/r/20211001125904.GK2283@kili Signed-off-by: Rob Clark <[email protected]>
2021-10-11drm/msm/a4xx: fix error handling in a4xx_gpu_init()Dan Carpenter1-4/+5
This code returns 1 on error instead of a negative error. It leads to an Oops in the caller. A second problem is that the check for "if (ret != -ENODATA)" cannot be true because "ret" is set to 1. Fixes: 5785dd7a8ef0 ("drm/msm: Fix duplicate gpu node in icc summary") Signed-off-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/r/20211001125759.GJ2283@kili Signed-off-by: Rob Clark <[email protected]>
2021-10-11drm/msm: Fix null pointer dereference on pointer edpColin Ian King1-1/+2
The initialization of pointer dev dereferences pointer edp before edp is null checked, so there is a potential null pointer deference issue. Fix this by only dereferencing edp after edp has been null checked. Addresses-Coverity: ("Dereference before null check") Fixes: ab5b0107ccf3 ("drm/msm: Initial add eDP support in msm drm driver (v5)") Signed-off-by: Colin Ian King <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Clark <[email protected]>
2021-10-11drm/msm/mdp5: fix cursor-related warningsDmitry Baryshkov1-0/+16
Since f35a2a99100f ("drm/encoder: make encoder control functions optional") drm_mode_config_validate would print warnings if both cursor plane and cursor functions are provided. Restore separate set of drm_crtc_funcs to be used if separate cursor plane is provided. [ 6.556046] ------------[ cut here ]------------ [ 6.556071] [CRTC:93:crtc-0] must not have both a cursor plane and a cursor_set func [ 6.556091] WARNING: CPU: 1 PID: 76 at drivers/gpu/drm/drm_mode_config.c:648 drm_mode_config_validate+0x238/0x4d0 [ 6.567453] Modules linked in: [ 6.577604] CPU: 1 PID: 76 Comm: kworker/u8:2 Not tainted 5.15.0-rc1-dirty #43 [ 6.580557] Hardware name: Qualcomm Technologies, Inc. DB820c (DT) [ 6.587763] Workqueue: events_unbound deferred_probe_work_func [ 6.593926] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 6.599740] pc : drm_mode_config_validate+0x238/0x4d0 [ 6.606596] lr : drm_mode_config_validate+0x238/0x4d0 [ 6.611804] sp : ffff8000121b3980 [ 6.616838] x29: ffff8000121b3990 x28: 0000000000000000 x27: 0000000000000001 [ 6.620140] x26: ffff8000114cde50 x25: ffff8000114cdd40 x24: ffff0000987282d8 [ 6.627258] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000001 [ 6.634376] x20: ffff000098728000 x19: ffff000080a39000 x18: ffffffffffffffff [ 6.641494] x17: 3136564e3631564e x16: 0000000000000324 x15: ffff800011c78709 [ 6.648613] x14: 0000000000000000 x13: ffff800011a22850 x12: 00000000000009ab [ 6.655730] x11: 0000000000000339 x10: ffff800011a22850 x9 : ffff800011a22850 [ 6.662848] x8 : 00000000ffffefff x7 : ffff800011a7a850 x6 : ffff800011a7a850 [ 6.669966] x5 : 000000000000bff4 x4 : 40000000fffff339 x3 : 0000000000000000 [ 6.677084] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00008093b800 [ 6.684205] Call trace: [ 6.691319] drm_mode_config_validate+0x238/0x4d0 [ 6.693577] drm_dev_register+0x17c/0x210 [ 6.698435] msm_drm_bind+0x4b4/0x694 [ 6.702429] try_to_bring_up_master+0x164/0x1d0 [ 6.706075] __component_add+0xa0/0x170 [ 6.710415] component_add+0x14/0x20 [ 6.714234] msm_hdmi_dev_probe+0x1c/0x2c [ 6.718053] platform_probe+0x68/0xe0 [ 6.721959] really_probe.part.0+0x9c/0x30c [ 6.725606] __driver_probe_device+0x98/0x144 [ 6.729600] driver_probe_device+0xc8/0x15c [ 6.734114] __device_attach_driver+0xb4/0x120 [ 6.738106] bus_for_each_drv+0x78/0xd0 [ 6.742619] __device_attach+0xdc/0x184 [ 6.746351] device_initial_probe+0x14/0x20 [ 6.750172] bus_probe_device+0x9c/0xa4 [ 6.754337] deferred_probe_work_func+0x88/0xc0 [ 6.758158] process_one_work+0x1d0/0x370 [ 6.762671] worker_thread+0x2c8/0x470 [ 6.766839] kthread+0x15c/0x170 [ 6.770483] ret_from_fork+0x10/0x20 [ 6.773870] ---[ end trace 5884eb76cd26d274 ]--- [ 6.777500] ------------[ cut here ]------------ [ 6.782043] [CRTC:93:crtc-0] must not have both a cursor plane and a cursor_move func [ 6.782063] WARNING: CPU: 1 PID: 76 at drivers/gpu/drm/drm_mode_config.c:654 drm_mode_config_validate+0x290/0x4d0 [ 6.794362] Modules linked in: [ 6.804600] CPU: 1 PID: 76 Comm: kworker/u8:2 Tainted: G W 5.15.0-rc1-dirty #43 [ 6.807555] Hardware name: Qualcomm Technologies, Inc. DB820c (DT) [ 6.816148] Workqueue: events_unbound deferred_probe_work_func [ 6.822311] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 6.828126] pc : drm_mode_config_validate+0x290/0x4d0 [ 6.834981] lr : drm_mode_config_validate+0x290/0x4d0 [ 6.840189] sp : ffff8000121b3980 [ 6.845223] x29: ffff8000121b3990 x28: 0000000000000000 x27: 0000000000000001 [ 6.848525] x26: ffff8000114cde50 x25: ffff8000114cdd40 x24: ffff0000987282d8 [ 6.855643] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000001 [ 6.862763] x20: ffff000098728000 x19: ffff000080a39000 x18: ffffffffffffffff [ 6.869879] x17: 3136564e3631564e x16: 0000000000000324 x15: ffff800011c790c2 [ 6.876998] x14: 0000000000000000 x13: ffff800011a22850 x12: 0000000000000a2f [ 6.884116] x11: 0000000000000365 x10: ffff800011a22850 x9 : ffff800011a22850 [ 6.891234] x8 : 00000000ffffefff x7 : ffff800011a7a850 x6 : ffff800011a7a850 [ 6.898351] x5 : 000000000000bff4 x4 : 40000000fffff365 x3 : 0000000000000000 [ 6.905470] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00008093b800 [ 6.912590] Call trace: [ 6.919702] drm_mode_config_validate+0x290/0x4d0 [ 6.921960] drm_dev_register+0x17c/0x210 [ 6.926821] msm_drm_bind+0x4b4/0x694 [ 6.930813] try_to_bring_up_master+0x164/0x1d0 [ 6.934459] __component_add+0xa0/0x170 [ 6.938799] component_add+0x14/0x20 [ 6.942619] msm_hdmi_dev_probe+0x1c/0x2c [ 6.946438] platform_probe+0x68/0xe0 [ 6.950345] really_probe.part.0+0x9c/0x30c [ 6.953991] __driver_probe_device+0x98/0x144 [ 6.957984] driver_probe_device+0xc8/0x15c [ 6.962498] __device_attach_driver+0xb4/0x120 [ 6.966492] bus_for_each_drv+0x78/0xd0 [ 6.971004] __device_attach+0xdc/0x184 [ 6.974737] device_initial_probe+0x14/0x20 [ 6.978556] bus_probe_device+0x9c/0xa4 [ 6.982722] deferred_probe_work_func+0x88/0xc0 [ 6.986543] process_one_work+0x1d0/0x370 [ 6.991057] worker_thread+0x2c8/0x470 [ 6.995223] kthread+0x15c/0x170 [ 6.998869] ret_from_fork+0x10/0x20 [ 7.002255] ---[ end trace 5884eb76cd26d275 ]--- Fixes: aa649e875daf ("drm/msm/mdp5: mdp5_crtc: Restore cursor state only if LM cursors are enabled") Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Clark <[email protected]>
2021-10-11drm/msm: Avoid potential overflow in timeout_to_jiffies()Marek Vasut1-2/+2
The return type of ktime_divns() is s64. The timeout_to_jiffies() currently assigns the result of this ktime_divns() to unsigned long, which on 32 bit systems may overflow. Furthermore, the result of this function is sometimes also passed to functions which expect signed long, dma_fence_wait_timeout() is one such example. Fix this by adjusting the type of remaining_jiffies to s64, so we do not suffer overflow there, and return a value limited to range of 0..INT_MAX, which is safe for all usecases of this timeout. The above overflow can be triggered if userspace passes in too large timeout value, larger than INT_MAX / HZ seconds. The kernel detects it and complains about "schedule_timeout: wrong timeout value %lx" and generates a warning backtrace. Note that this fixes commit 6cedb8b377bb ("drm/msm: avoid using 'timespec'"), because the previously used timespec_to_jiffies() function returned unsigned long instead of s64: static inline unsigned long timespec_to_jiffies(const struct timespec *value) Fixes: 6cedb8b377bb ("drm/msm: avoid using 'timespec'") Signed-off-by: Marek Vasut <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Jordan Crouse <[email protected]> Cc: Rob Clark <[email protected]> Cc: [email protected] # 5.6+ Acked-by: Arnd Bergmann <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Clark <[email protected]>
2021-10-11drm/msm: Fix devfreq NULL pointer dereference on a3xxStephan Gerhold1-0/+6
There is no devfreq on a3xx at the moment since gpu_busy is not implemented. This means that msm_devfreq_init() will return early and the entire devfreq setup is skipped. However, msm_devfreq_active() and msm_devfreq_idle() are still called unconditionally later, causing a NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 Internal error: Oops: 96000004 [#1] PREEMPT SMP CPU: 0 PID: 133 Comm: ring0 Not tainted 5.15.0-rc1 #4 Hardware name: Longcheer L8150 (DT) pc : mutex_lock_io+0x2bc/0x2f0 lr : msm_devfreq_active+0x3c/0xe0 [msm] Call trace: mutex_lock_io+0x2bc/0x2f0 msm_gpu_submit+0x164/0x180 [msm] msm_job_run+0x54/0xe0 [msm] drm_sched_main+0x2b0/0x4a0 [gpu_sched] kthread+0x154/0x160 ret_from_fork+0x10/0x20 Fix this by adding a check in msm_devfreq_active/idle() which ensures that devfreq was actually initialized earlier. Fixes: 9bc95570175a ("drm/msm: Devfreq tuning") Reported-by: Nikita Travkin <[email protected]> Tested-by: Nikita Travkin <[email protected]> Signed-off-by: Stephan Gerhold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Clark <[email protected]>
2021-10-11drm/msm/dp: only signal audio when disconnected detected at dp_pm_resumeKuogee Hsieh1-5/+5
Currently there is audio not working problem after system resume from suspend if hdmi monitor stay plugged in at DUT. However this problem does not happen at normal operation but at a particular test case. The root cause is DP driver signal audio with connected state at resume which trigger audio trying to setup audio data path through DP main link but failed due to display port is not setup and enabled by upper layer framework yet. This patch only have DP driver signal audio only when DP is in disconnected state so that audio option shows correct state after system resume. DP driver will not signal audio with connected state until display enabled executed by upper layer framework where display port is setup completed and main link is running. Changes in V2: -- add details commit text Fixes: afc9b8b6bab8 ("drm/msm/dp: signal audio plugged change at dp_pm_resume") Signed-off-by: Kuogee Hsieh <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Clark <[email protected]>
2021-10-01drm/msm/submit: fix overflow check on 64-bit architecturesArnd Bergmann1-1/+2
The overflow check does causes a warning from clang-14 when 'sz' is a type that is smaller than size_t: drivers/gpu/drm/msm/msm_gem_submit.c:217:10: error: result of comparison of constant 18446744073709551615 with expression of type 'unsigned int' is always false [-Werror,-Wtautological-constant-out-of-range-compare] if (sz == SIZE_MAX) { Change the type accordingly. Fixes: 20224d715a88 ("drm/msm/submit: Move copy_from_user ahead of locking bos") Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Clark <[email protected]>
2021-10-01drm/msm: One sched entity per process per priorityRob Clark3-21/+75
Some userspace apps make assumptions that rendering against multiple contexts within the same process (from the same thread, with appropriate MakeCurrent() calls) provides sufficient synchronization without any external synchronization (ie. glFenceSync()/glWaitSync()). Since a submitqueue maps to a gl/vk context, having multiple sched entities of the same priority only works with implicit sync enabled. To fix this, limit things to a single sched entity per priority level per process. An alternative would be sharing submitqueues between contexts in userspace, but tracking of per-context faults (ie. GL_EXT_robustness) is already done at the submitqueue level, so this is not an option. Signed-off-by: Rob Clark <[email protected]>
2021-10-01drm/msm: A bit more docs + cleanupRob Clark2-45/+57
msm_file_private is more gpu related, and in the next commit it will need access to other GPU specific #defines. While we're at it, add some comments. Signed-off-by: Rob Clark <[email protected]>
2021-10-01drm/msm/a6xx: Track current ctx by seqnoRob Clark4-4/+17
In theory a context can be destroyed and a new one allocated at the same address, making the pointer comparision to detect when we don't need to update the current pagetables invalid. Instead assign a sequence number to each context on creation, and use this for the check. Fixes: 84c31ee16f90 ("drm/msm/a6xx: Add support for per-instance pagetables") Signed-off-by: Rob Clark <[email protected]>
2021-10-01drm/msm/a6xx: Serialize GMU communicationRob Clark3-6/+43
I've seen some crashes in our crash reporting that *look* like multiple threads stomping on each other while communicating with GMU. So wrap all those paths in a lock. Signed-off-by: Rob Clark <[email protected]>
2021-10-01drm/msm: Fix crash on dev file closeRob Clark2-4/+3
If the device file was opened prior to fw being available (such as from initrd before rootfs is mounted, when the initrd does not contain GPU fw), that would cause a later crash when the dev file is closed due to unitialized submitqueues list: CPU: 4 PID: 263 Comm: plymouthd Tainted: G W 5.15.0-rc2-next-20210924 #2 Hardware name: LENOVO 81JL/LNVNB161216, BIOS 9UCN33WW(V2.06) 06/ 4/2019 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : msm_submitqueue_close+0x30/0x190 [msm] lr : msm_postclose+0x54/0xf0 [msm] sp : ffff80001074bb80 x29: ffff80001074bb80 x28: ffff03ad80c4db80 x27: ffff03ad80dc5ab0 x26: 0000000000000000 x25: ffff03ad80dc5af8 x24: ffff03ad81e90800 x23: 0000000000000000 x22: ffff03ad81e90800 x21: ffff03ad8b35e788 x20: ffff03ad81e90878 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: ffffda15f14f7940 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000040 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffda15cd18ff88 x8 : ffff03ad80c4db80 x7 : 0000000000000228 x6 : 0000000000000000 x5 : 1793a4e807e636bd x4 : ffff03ad80c4db80 x3 : ffff03ad81e90878 x2 : 0000000000000000 x1 : ffff03ad80c4db80 x0 : 0000000000000000 Call trace: msm_submitqueue_close+0x30/0x190 [msm] msm_postclose+0x54/0xf0 [msm] drm_file_free.part.0+0x1cc/0x2e0 [drm] drm_close_helper.isra.0+0x74/0x84 [drm] drm_release+0x78/0x120 [drm] __fput+0x78/0x23c ____fput+0x1c/0x30 task_work_run+0xcc/0x22c do_exit+0x304/0x9f4 do_group_exit+0x44/0xb0 __wake_up_parent+0x0/0x3c invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x4c/0xf4 do_el0_svc+0x30/0x9c el0_svc+0x20/0x60 el0t_64_sync_handler+0xe8/0xf0 el0t_64_sync+0x1a0/0x1a4 Code: aa0003f5 a90153f3 f8408eb3 aa1303e0 (f85e8674) ---[ end trace 39b2fa37509a2be2 ]--- Fixing recursive fault but reboot is needed! Fixes: 86c2a0f000c1 drm/msm: ("Small submitqueue creation cleanup") Reported-by: Steev Klimaszewski <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2021-09-26Merge tag 'edac_urgent_for_v5.15_rc3' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fixes from Borislav Petkov: "Fix two EDAC drivers using the wrong value type for the DIMM mode" * tag 'edac_urgent_for_v5.15_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/dmc520: Assign the proper type to dimm->edac_mode EDAC/synopsys: Fix wrong value type assignment for edac_mode
2021-09-26Merge tag 'thermal-v5.15-rc3' of ↵Linus Torvalds3-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal fixes from Daniel Lezcano: - Fix thermal shutdown after a suspend/resume due to a wrong TCC value restored on Intel platform (Antoine Tenart) - Fix potential buffer overflow when building the list of policies. The buffer size is not updated after writing to it (Dan Carpenter) - Fix wrong check against IS_ERR instead of NULL (Ansuel Smith) * tag 'thermal-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal/drivers/tsens: Fix wrong check for tzd in irq handlers thermal/core: Potential buffer overflow in thermal_build_list_of_policies() thermal/drivers/int340x: Do not set a wrong tcc offset on resume
2021-09-26Merge tag 'irq-urgent-2021-09-26' of ↵Linus Torvalds6-13/+64
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of fixes for interrupt chip drivers: - Work around a bad GIC integration on a Renesas platform which can't handle byte-sized MMIO access - Plug a potential memory leak in the GICv4 driver - Fix a regression in the Armada 370-XP IPI code which was caused by issuing EOI instack of ACK. - A couple of small fixes here and there" * tag 'irq-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic: Work around broken Renesas integration irqchip/renesas-rza1: Use semicolons instead of commas irqchip/gic-v3-its: Fix potential VPE leak on error irqchip/goldfish-pic: Select GENERIC_IRQ_CHIP to fix build irqchip/mbigen: Repair non-kernel-doc notation irqdomain: Change the type of 'size' in __irq_domain_add() to be consistent irqchip/armada-370-xp: Fix ack/eoi breakage Documentation: Fix irq-domain.rst build warning
2021-09-25Merge tag 'scsi-fixes' of ↵Linus Torvalds32-284/+273
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Thirty-three fixes, I'm afraid. Essentially the build up from the last couple of weeks while I've been dealling with Linux Plumbers conference infrastructure issues. It's mostly the usual assortment of spelling fixes and minor corrections. The only core relevant changes are to the sd driver to reduce the spin up message spew and fix a small memory leak on the freeing path" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (33 commits) scsi: ses: Retry failed Send/Receive Diagnostic commands scsi: target: Fix spelling mistake "CONFLIFT" -> "CONFLICT" scsi: lpfc: Fix gcc -Wstringop-overread warning, again scsi: lpfc: Use correct scnprintf() limit scsi: lpfc: Fix sprintf() overflow in lpfc_display_fpin_wwpn() scsi: core: Remove 'current_tag' scsi: acornscsi: Remove tagged queuing vestiges scsi: fas216: Kill scmd->tag scsi: qla2xxx: Restore initiator in dual mode scsi: ufs: core: Unbreak the reset handler scsi: sd_zbc: Support disks with more than 2**32 logical blocks scsi: ufs: core: Revert "scsi: ufs: Synchronize SCSI and UFS error handling" scsi: bsg: Fix device unregistration scsi: sd: Make sd_spinup_disk() less noisy scsi: ufs: ufs-pci: Fix Intel LKF link stability scsi: mpt3sas: Clean up some inconsistent indenting scsi: megaraid: Clean up some inconsistent indenting scsi: sr: Fix spelling mistake "does'nt" -> "doesn't" scsi: Remove SCSI CDROM MAINTAINERS entry scsi: megaraid: Fix Coccinelle warning ...
2021-09-25Merge tag 'block-5.15-2021-09-25' of git://git.kernel.dk/linux-blockLinus Torvalds4-33/+36
Pull block fixes from Jens Axboe: - NVMe pull request via Christoph: - keep ctrl->namespaces ordered (Christoph Hellwig) - fix incorrect h2cdata pdu offset accounting in nvme-tcp (Sagi Grimberg) - handled updated hw_queues in nvme-fc more carefully (Daniel Wagner, James Smart) - md lock order fix (Christoph) - fallocate locking fix (Ming) - blktrace UAF fix (Zhihao) - rq-qos bio tracking fix (Ming) * tag 'block-5.15-2021-09-25' of git://git.kernel.dk/linux-block: block: hold ->invalidate_lock in blkdev_fallocate blktrace: Fix uaf in blk_trace access after removing by sysfs block: don't call rq_qos_ops->done_bio if the bio isn't tracked md: fix a lock order reversal in md_alloc nvme: keep ctrl->namespaces ordered nvme-tcp: fix incorrect h2cdata pdu offset accounting nvme-fc: remove freeze/unfreeze around update_nr_hw_queues nvme-fc: avoid race between time out and tear down nvme-fc: update hardware queues before using them
2021-09-25Merge tag 'for-linus-5.15b-rc3-tag' of ↵Linus Torvalds5-6/+16
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Some minor cleanups and fixes of some theoretical bugs, as well as a fix of a bug introduced in 5.15-rc1" * tag 'for-linus-5.15b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/x86: fix PV trap handling on secondary processors xen/balloon: fix balloon kthread freezing swiotlb-xen: this is PV-only on x86 xen/pci-swiotlb: reduce visibility of symbols PCI: only build xen-pcifront in PV-enabled environments swiotlb-xen: ensure to issue well-formed XENMEM_exchange requests Xen/gntdev: don't ignore kernel unmapping error xen/x86: drop redundant zeroing from cpu_initialize_context()
2021-09-25Merge tag 'char-misc-5.15-rc3' of ↵Linus Torvalds15-103/+208
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes for 5.15-rc3. Nothing huge in here, just fixes for a number of small issues that have been reported. These include: - habanalabs race conditions and other bugs fixed - binder driver fixes - fpga driver fixes - coresight build warning fix - nvmem driver fix - comedi memory leak fix - bcm-vk tty race fix - other tiny driver fixes All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits) comedi: Fix memory leak in compat_insnlist() nvmem: NVMEM_NINTENDO_OTP should depend on WII misc: bcm-vk: fix tty registration race fpga: dfl: Avoid reads to AFU CSRs during enumeration fpga: machxo2-spi: Fix missing error code in machxo2_write_complete() fpga: machxo2-spi: Return an error on failure habanalabs: expose a single cs seq in staged submissions habanalabs: fix wait offset handling habanalabs: rate limit multi CS completion errors habanalabs/gaudi: fix LBW RR configuration habanalabs: Fix spelling mistake "FEADBACK" -> "FEEDBACK" habanalabs: fail collective wait when not supported habanalabs/gaudi: use direct MSI in single mode habanalabs: fix kernel OOPs related to staged cs habanalabs: fix potential race in interrupt wait ioctl mcb: fix error handling in mcb_alloc_bus() misc: genwqe: Fixes DMA mask setting coresight: syscfg: Fix compiler warning nvmem: core: Add stubs for nvmem_cell_read_variable_le_u32/64 if !CONFIG_NVMEM binder: make sure fd closes complete ...
2021-09-25Merge tag 'staging-5.15-rc3' of ↵Linus Torvalds2-34/+36
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are two small staging driver fixes for 5.15-rc3: - greybus tty use-after-free bugfix - r8188eu ioctl overlap build warning fix Note, the r8188eu ioctl has been entirely removed for 5.16-rc1, but it's good to get this fixed now for people using this in 5.15. Both of these have been in linux-next for a while with no reported issues" * tag 'staging-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: r8188eu: fix -Wrestrict warnings staging: greybus: uart: fix tty use after free
2021-09-25Merge tag 'tty-5.15-rc3' of ↵Linus Torvalds4-25/+24
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are four small tty/serial driver fixes for 5.15-rc3. They include: - remove an export now that no one is using it anymore - mvebu-uart tx_empty callback fix - 8250_omap bugfix - synclink_gt build fix All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: unexport tty_ldisc_release tty: synclink_gt: rename a conflicting function name serial: mvebu-uart: fix driver's tx_empty callback serial: 8250: 8250_omap: Fix RX_LVL register offset
2021-09-25Merge tag 'usb-5.15-rc3' of ↵Linus Torvalds19-190/+306
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB driver fixes from Greg KH: "Here are some USB driver fixes and new device ids for 5.15-rc3. They include: - usb-storage quirk additions - usb-serial new device ids - usb-serial driver fixes - USB roothub registration bugfix to resolve a long-reported issue - usb gadget driver fixes for a large number of small things - dwc2 driver fixes All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits) USB: serial: option: add device id for Foxconn T99W265 USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter USB: serial: cp210x: add part-number debug printk USB: serial: cp210x: fix dropped characters with CP2102 MAINTAINERS: usb, update Peter Korsgaard's entries usb: musb: tusb6010: uninitialized data in tusb_fifo_write_unaligned() usb-storage: Add quirk for ScanLogic SL11R-IDE older than 2.6c Re-enable UAS for LaCie Rugged USB3-FW with fk quirk USB: serial: option: remove duplicate USB device ID USB: serial: mos7840: remove duplicated 0xac24 device ID arm64: dts: qcom: ipq8074: remove USB tx-fifo-resize property usb: gadget: f_uac2: Populate SS descriptors' wBytesPerInterval usb: gadget: f_uac2: Add missing companion descriptor for feedback EP usb: dwc2: gadget: Fix ISOC transfer complete handling for DDMA usb: core: hcd: Modularize HCD stop configuration in usb_stop_hcd() xhci: Set HCD flag to defer primary roothub registration usb: core: hcd: Add support for deferring roothub registration usb: dwc2: gadget: Fix ISOC flow for BDMA and Slave usb: dwc3: core: balance phy init and exit Revert "USB: bcma: Add a check for devm_gpiod_get" ...
2021-09-24Merge tag 'gpio-fixes-for-v5.15-rc3' of ↵Linus Torvalds4-7/+9
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix a regression in GPIO ACPI on HP ElitePad 1000 G2 where the gpio_set_debounce_timeout() now returns a fatal error if the specific debounce period is not supported by the driver instead of just emitting a warning - fix return values of irq_mask/unmask() callbacks in gpio-uniphier - fix hwirq calculation in gpio-aspeed-sgpio - fix two issues in gpio-rockchip: only make the extended debounce support available for v2 and remove a redundant BIT() usage * tag 'gpio-fixes-for-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio/rockchip: fix get_direction value handling gpio/rockchip: extended debounce support is only available on v2 gpio: gpio-aspeed-sgpio: Fix wrong hwirq in irq handler. gpio: uniphier: Fix void functions to remove return value gpiolib: acpi: Make set-debounce-timeout failures non fatal
2021-09-24Merge tag 'devprop-5.15-rc3' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework fix from Rafael Wysocki: "Fix software node refcount imbalance on device removal (Laurentiu Tudor)" * tag 'devprop-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: software node: balance refcount for managed software nodes
2021-09-24Merge tag 'acpi-5.15-rc3' of ↵Linus Torvalds1-16/+7
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Revert a recent commit related to memory management that turned out to be problematic (Jia He)" * tag 'acpi-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI: Add memory semantics to acpi_os_map_memory()"
2021-09-24Merge tag 'drm-fixes-2021-09-24' of git://anongit.freedesktop.org/drm/drmLinus Torvalds9-30/+55
Pull drm fixes from Dave Airlie: "Quiet week this week, just some i915 and amd fixes, just getting ready for my all nighter maintainer summit! Summary: i915: - Fix ADL-P memory bandwidth parameters - Fix memory corruption due to a double free - Fix memory leak in DMC firmware handling amdgpu: - Update MAINTAINERS entry for powerplay - Fix empty macros - SI DPM fix amdkfd: - SVM fixes - DMA mapping fix" * tag 'drm-fixes-2021-09-24' of git://anongit.freedesktop.org/drm/drm: drm/amdkfd: fix svm_migrate_fini warning drm/amdkfd: handle svm migrate init error drm/amd/pm: Update intermediate power state for SI drm/amdkfd: fix dma mapping leaking warning drm/amdkfd: SVM map to gpus check vma boundary MAINTAINERS: fix up entry for AMD Powerplay drm/amd/display: fix empty debug macros drm/i915: Free all DMC payloads drm/i915: Move __i915_gem_free_object to ttm_bo_destroy drm/i915: Update memory bandwidth parameters
2021-09-24Merge tag 'nvme-5.15-2021-09-24' of git://git.infradead.org/nvme into block-5.15Jens Axboe3-28/+36
Pull NVMe fixes from Christoph: "nvme fixes for Linux 5.15: - keep ctrl->namespaces ordered (me) - fix incorrect h2cdata pdu offset accounting in nvme-tcp (Sagi Grimberg) - handled updated hw_queues in nvme-fc more carefully (Daniel Wagner, James Smart)" * tag 'nvme-5.15-2021-09-24' of git://git.infradead.org/nvme: nvme: keep ctrl->namespaces ordered nvme-tcp: fix incorrect h2cdata pdu offset accounting nvme-fc: remove freeze/unfreeze around update_nr_hw_queues nvme-fc: avoid race between time out and tear down nvme-fc: update hardware queues before using them
2021-09-24Merge tag 'irqchip-fixes-5.15-1' of ↵Thomas Gleixner6-13/+64
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Work around a bad GIC integration on a Renesas platform, where the interconnect cannot deal with byte-sized MMIO accesses - Cleanup another Renesas driver abusing the comma operator - Fix a potential GICv4 memory leak on an error path - Make the type of 'size' consistent with the rest of the code in __irq_domain_add() - Fix a regression in the Armada 370-XP IPI path - Fix the build for the obviously unloved goldfish-pic - Some documentation fixes Link: https://lore.kernel.org/r/[email protected]
2021-09-24Merge tag 'usb-serial-5.15-rc3' of ↵Greg Kroah-Hartman3-3/+48
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.15-rc3 Here's a fix for a regression affecting some CP2102 devices and a host of new device ids. Included are also a couple of cleanups of duplicate device ids, which are also tagged for stable to keep the tables in sync, and a trivial patch to help debugging cp210x issues. All have been in linux-next with no reported issues. Note however that the last last two device-id commits were rebased to fix up a lore link in a commit message (as the patch itself never made it to the list). * tag 'usb-serial-5.15-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add device id for Foxconn T99W265 USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter USB: serial: cp210x: add part-number debug printk USB: serial: cp210x: fix dropped characters with CP2102 USB: serial: option: remove duplicate USB device ID USB: serial: mos7840: remove duplicated 0xac24 device ID USB: serial: option: add Telit LN920 compositions
2021-09-24USB: serial: option: add device id for Foxconn T99W265Slark Xiao1-0/+2
Adding support for Foxconn device T99W265 for enumeration with PID 0xe0db. usb-devices output for 0xe0db T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 19 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=0489 ProdID=e0db Rev=05.04 S: Manufacturer=Microsoft S: Product=Generic Mobile Broadband Adapter S: SerialNumber=6c50f452 C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option if0/1: MBIM, if2:Diag, if3:GNSS, if4: Modem Signed-off-by: Slark Xiao <[email protected]> Link: https://lore.kernel.org/r/[email protected] [ johan: use USB_DEVICE_INTERFACE_CLASS(), amend comment ] Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2021-09-24USB: serial: cp210x: add ID for GW Instek GDM-834x Digital MultimeterUwe Brandt1-0/+1
Add the USB serial device ID for the GW Instek GDM-834x Digital Multimeter. Signed-off-by: Uwe Brandt <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2021-09-24Merge tag 'drm-intel-fixes-2021-09-23' of ↵Dave Airlie3-8/+25
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.15-rc3: - Fix ADL-P memory bandwidth parameters - Fix memory corruption due to a double free - Fix memory leak in DMC firmware handling Signed-off-by: Dave Airlie <[email protected]> From: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-09-23drm/amdkfd: fix svm_migrate_fini warningPhilip Yang3-15/+4
Device manager releases device-specific resources when a driver disconnects from a device, devm_memunmap_pages and devm_release_mem_region calls in svm_migrate_fini are redundant. It causes below warning trace after patch "drm/amdgpu: Split amdgpu_device_fini into early and late", so remove function svm_migrate_fini. BUG: https://gitlab.freedesktop.org/drm/amd/-/issues/1718 WARNING: CPU: 1 PID: 3646 at drivers/base/devres.c:795 devm_release_action+0x51/0x60 Call Trace: ? memunmap_pages+0x360/0x360 svm_migrate_fini+0x2d/0x60 [amdgpu] kgd2kfd_device_exit+0x23/0xa0 [amdgpu] amdgpu_amdkfd_device_fini_sw+0x1d/0x30 [amdgpu] amdgpu_device_fini_sw+0x45/0x290 [amdgpu] amdgpu_driver_release_kms+0x12/0x30 [amdgpu] drm_dev_release+0x20/0x40 [drm] release_nodes+0x196/0x1e0 device_release_driver_internal+0x104/0x1d0 driver_detach+0x47/0x90 bus_remove_driver+0x7a/0xd0 pci_unregister_driver+0x3d/0x90 amdgpu_exit+0x11/0x20 [amdgpu] Signed-off-by: Philip Yang <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-09-23drm/amdkfd: handle svm migrate init errorPhilip Yang1-0/+3
If svm migration init failed to create pgmap for device memory, set pgmap type to 0 to disable device SVM support capability. Signed-off-by: Philip Yang <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-09-23drm/amd/pm: Update intermediate power state for SILijo Lazar1-0/+2
Update the current state as boot state during dpm initialization. During the subsequent initialization, set_power_state gets called to transition to the final power state. set_power_state refers to values from the current state and without current state populated, it could result in NULL pointer dereference. For ex: on platforms where PCI speed change is supported through ACPI ATCS method, the link speed of current state needs to be queried before deciding on changing to final power state's link speed. The logic to query ATCS-support was broken on certain platforms. The issue became visible when broken ATCS-support logic got fixed with commit f9b7f3703ff9 ("drm/amdgpu/acpi: make ATPX/ATCS structures global (v2)"). Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1698 Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-09-23drm/amdkfd: fix dma mapping leaking warningPhilip Yang1-4/+14
For xnack off, restore work dma unmap previous system memory page, and dma map the updated system memory page to update GPU mapping, this is not dma mapping leaking, remove the WARN_ONCE for dma mapping leaking. prange->dma_addr store the VRAM page pfn after the range migrated to VRAM, should not dma unmap VRAM page when updating GPU mapping or remove prange. Add helper svm_is_valid_dma_mapping_addr to check VRAM page and error cases. Mask out SVM_RANGE_VRAM_DOMAIN flag in dma_addr before calling amdgpu vm update to avoid BUG_ON(*addr & 0xFFFF00000000003FULL), and set it again immediately after. This flag is used to know the type of page later to dma unmapping system memory page. Fixes: 1d5dbfe6c06a ("drm/amdkfd: classify and map mixed svm range pages in GPU") Signed-off-by: Philip Yang <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-09-23drm/amdkfd: SVM map to gpus check vma boundaryPhilip Yang1-1/+5
SVM range may includes multiple VMAs with different vm_flags, if prange page index is the last page of the VMA offset + npages, update GPU mapping to create GPU page table with same VMA access permission. Signed-off-by: Philip Yang <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-09-23drm/amd/display: fix empty debug macrosArnd Bergmann1-2/+2
Using an empty macro expansion as a conditional expression produces a W=1 warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c: In function 'dce_aux_transfer_with_retries': drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:775:156: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 775 | "dce_aux_transfer_with_retries: AUX_RET_SUCCESS: AUX_TRANSACTION_REPLY_I2C_OVER_AUX_DEFER"); | ^ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:783:155: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 783 | "dce_aux_transfer_with_retries: AUX_RET_SUCCESS: AUX_TRANSACTION_REPLY_I2C_OVER_AUX_NACK"); | ^ Expand it to "do { } while (0)" instead to make the expression more robust and avoid the warning. Fixes: 56aca2309301 ("drm/amd/display: Add AUX I2C tracing.") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.