aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2017-07-20i40iw: Free QP PBLEs when the QP is destroyedTatyana Nikolova2-5/+12
If the physical buffer list entries (PBLEs) of a QP are freed up at i40iw_dereg_mr, they can be assigned to a newly created QP before the previous QP is destroyed. Fix this by freeing PBLEs only when the QP is destroyed. Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20i40iw: Avoid memory leak of CQP request objectsShiraz Saleem3-0/+55
Control Queue Pair (CQP) request objects, which have not received a completion upon interface close, remain in memory. To fix this, identify and free all pending CQP request objects during destroy CQP OP. Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20i40iw: Update list correctlyHenry Orosco1-1/+1
To avoid infinite loop, in i40iw_ieq_handle_exception, update plist inside while loop. Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20i40iw: Add missing memory barrierHenry Orosco1-0/+3
Add missing write memory barrier before writing the header containing valid bit to the WQE in i40iw_puda_send. Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20i40iw: Free QP resources on CQP destroy QP failureShiraz Saleem1-2/+6
Current flow leaves software QP structures in memory if Control Queue Pair (CQP) destroy QP OP fails. To fix this, free QP resources on fail of CQP destroy QP OP. Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20i40iw: Release cm_id ref on PCI function resetShiraz Saleem1-1/+4
On PCI function reset, cm_id reference is not released which causes an application hang, as it waits on the cm_id to be released on rdma_destroy. To fix this, call i40iw_cm_disconn during a PCI function reset to clean-up resources and release cm_id reference. Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20i40iw: Utilize iwdev->reset during PCI function resetShiraz Saleem1-27/+24
Utilize iwdev->reset on a PCI function reset notification instead of passing in reset flag for resource clean-up. Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20i40iw: Do not poll CCQ after it is destroyedMustafa Ismail1-0/+2
Control Queue Pair (CQP) OPs, in this case - Update SDs, cannot poll the Control Completion Queue (CCQ) after CCQ is destroyed. Instead, poll via registers. Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20i40iw: Fix order of cleanup in closeMustafa Ismail1-3/+4
The order for calling i40iw_destroy_pble_pool is incorrect. Also, add PBLE_CHUNK_MEM init state to track pble pool creation and destruction. Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20nvmet: don't report 0-bytes in serial numberMartin Wilck1-2/+14
The NVME standard mandates that the SN, MN, and FR fields of the Identify Controller Data Structure be "ASCII strings". That means that they may not contain 0-bytes, not even string terminators. Signed-off-by: Martin Wilck <mwilck@suse.com> Reviewed-by: Hannes Reinecke <hare@suse.de> [hch: fixed for the move of the serial field, updated description] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-20nvmet: preserve controller serial number between rebootsJohannes Thumshirn1-0/+22
The NVMe target has no way to preserve controller serial IDs across reboots which breaks udev scripts doing SYMLINK+="dev/disk/by-id/nvme-$env{ID_SERIAL}-part%n. Export the randomly generated serial number via configfs and allow setting of a serial via configfs to mitigate this breakage. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-20nvmet: Move serial number from controller to subsystemJohannes Thumshirn3-5/+4
The NVMe specification defines the serial number as: "Serial Number (SN): Contains the serial number for the NVM subsystem that is assigned by the vendor as an ASCII string. Refer to section 7.10 for unique identifier requirements. Refer to section 1.5 for ASCII string requirements" So move it from the controller to the subsystem, where it belongs. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-20nvmet: prefix version configfs file with attrJohannes Thumshirn1-4/+4
The NVMe target's attribute files need an attr prefix in order to have nvmetcli recognize them. Add this attribute. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-20nvme-pci: Fix an error handling path in 'nvme_probe()'Christophe JAILLET1-3/+4
Release resources in the correct order in order not to miss a 'put_device()' if 'nvme_dev_map()' fails. Fixes: b00a726a9fd8 ("NVMe: Don't unmap controller registers on reset") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-20nvme-pci: Remove nvme_setup_prps BUG_ONKeith Busch1-8/+25
This patch replaces the invalid nvme SGL kernel panic with a warning, and returns an appropriate error. The warning will occur only on the first occurance, and sgl details will be printed to help debug how the request was allowed to form. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-20nvme-pci: add another device ID with stripe quirkDavid Wayne Fugate1-0/+3
Adds a fourth Intel controller which has the "stripe" quirk. Signed-off-by: David Wayne Fugate <david.fugate@intel.com> Acked-by: Keith Busch <keith.busch@intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-20nvmet-fc: fix byte swapping in nvmet_fc_ls_create_associationChristoph Hellwig1-4/+4
We always need to do non-equal comparisms on the native endian versions to get the correct result. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-20nvme: fix byte swapping in the streams codeChristoph Hellwig1-1/+1
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-20HID: hid-logitech-hidpp: add NULL check on devm_kmemdup() return valueGustavo A. R. Silva1-0/+3
Check return value from call to devm_kmemdup() in order to prevent a NULL pointer dereference. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-07-20xhci: fix memleak in xhci_run()Shu Wang1-1/+3
Found this issue by kmemleak. xhci_run() did not check return val and free command for xhci_queue_vendor_command() unreferenced object 0xffff88011c0be500 (size 64): comm "kworker/0:1", pid 58, jiffies 4294670908 (age 50.420s) hex dump (first 32 bytes): backtrace: [<ffffffff8176166a>] kmemleak_alloc+0x4a/0xa0 [<ffffffff8121801a>] kmem_cache_alloc_trace+0xca/0x1d0 [<ffffffff81576bf4>] xhci_alloc_command+0x44/0x130 [<ffffffff8156f1cc>] xhci_run+0x4cc/0x630 [<ffffffff8153b84b>] usb_add_hcd+0x3bb/0x950 [<ffffffff8154eac8>] usb_hcd_pci_probe+0x188/0x500 [<ffffffff815851ac>] xhci_pci_probe+0x2c/0x220 [<ffffffff813d2ca5>] local_pci_probe+0x45/0xa0 [<ffffffff810a54e4>] work_for_cpu_fn+0x14/0x20 [<ffffffff810a8409>] process_one_work+0x149/0x360 [<ffffffff810a8d08>] worker_thread+0x1d8/0x3c0 [<ffffffff810ae7d9>] kthread+0x109/0x140 [<ffffffff8176d585>] ret_from_fork+0x25/0x30 [<ffffffffffffffff>] 0xffffffffffffffff Cc: <stable@vger.kernel.org> Signed-off-by: Shu Wang <shuwang@redhat.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-20usb: xhci: fix spinlock recursion for USB2 test modePeter Chen1-0/+2
Both xhci_hub_control and xhci_disable_slot tries to hold spinlock, the spinlock recursion occurs when enters USB2 test mode. Fix it by unlock spinlock before calling xhci_disable_slot. Cc: <stable@vger.kernel.org> Fixes: 0f1d832ed1fb ("usb: xhci: Add port test modes support for usb2") Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-20xhci: fix 20000ms port resume timeoutMathias Nyman1-0/+3
A uncleared PLC (port link change) bit will prevent furuther port event interrupts for that port. Leaving it uncleared caused get_port_status() to timeout after 20000ms while waiting to get the final port event interrupt for resume -> U0 state change. This is a targeted fix for a specific case where we get a port resume event racing with xhci resume. The port event interrupt handler notices xHC is not yet running and bails out early, leaving PLC uncleared. The whole xhci port resuming needs more attention, but while working on it it anyways makes sense to always ensure PLC is cleared in get_port_status before setting a new link state and waiting for its completion. Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-20usb: xhci: Issue stop EP command only when the EP state is runningShyam Sundar S K1-1/+8
on AMD platforms with SNPS 3.1 USB controller if stop endpoint command is issued the controller does not respond, when the EP is not in running state. HW completes the command execution and reports "Context State Error" completion code. This is as per the spec. However HW on receiving the second command additionally marks EP to Flow control state in HW which is RTL bug. This bug causes the HW not to respond to any further doorbells that are rung by the driver. This makes the EP to not functional anymore and causes gross functional failures. As a workaround, not to hit this problem, it's better to check the EP state and issue a stop EP command only when the EP is in running state. As a sidenote, even with this patch there is still a possibility of triggering the RTL bug if the context state races with the stop endpoint command as described in xHCI spec 4.6.9 [code simplification and reworded sidenote in commit message -Mathias] Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Nehal Shah <Nehal-bakulchandra.Shah@amd.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-20xhci: Bad Ethernet performance plugged in ASM1042A hostJiahau Chang5-0/+69
When USB Ethernet is plugged in ASMEDIA ASM1042A xHCI host, bad performance was manifesting in Web browser use (like download large file such as ISO image). It is known limitation of ASM1042A that is not compatible with driver scheduling, As a workaround we can modify flow control handling of ASM1042A. The register we modify is changes the behavior [use quirk bit 28, usleep_range 40-60us, empty non-pci function -Mathias] Cc: <stable@vger.kernel.org> Signed-off-by: Jiahau Chang <Lars_chang@asmedia.com.tw> Signed-off-by: Ian Pilcher <arequipeno@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-20xhci: Fix NULL pointer dereference when cleaning up streams for removed hostMathias Nyman1-4/+7
This off by one in stream_id indexing caused NULL pointer dereference and soft lockup on machines with USB attached SCSI devices connected to a hotpluggable xhci controller. The code that cleans up pending URBs for dead hosts tried to dereference a stream ring at the invalid stream_id 0. ep->stream_info->stream_rings[0] doesn't point to a ring. Start looping stream_id from 1 like in all the other places in the driver, and check that the ring exists before trying to kill URBs on it. Reported-by: rocko r <rockorequin@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-20drm/mst: Avoid processing partially received up/down message transactionsImre Deak1-7/+24
Currently we may process up/down message transactions containing uninitialized data. This can happen if there was an error during the reception of any message in the transaction, but we happened to receive the last message correctly with the end-of-message flag set. To avoid this abort the reception of the transaction when the first error is detected, rejecting any messages until a message with the start-of-message flag is received (which will start a new transaction). This is also what the DP 1.4 spec 2.11.8.2 calls for in this case. In addtion this also prevents receiving bogus transactions without the first message with the the start-of-message flag set. v2: - unchanged v3: - git add the part that actually skips messages after an error in drm_dp_sideband_msg_build() Cc: Dave Airlie <airlied@redhat.com> Cc: Lyude <lyude@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170719134632.13366-1-imre.deak@intel.com
2017-07-20drm/mst: Avoid dereferencing a NULL mstb in drm_dp_mst_handle_up_req()Imre Deak1-1/+3
In case of an unknown broadcast message is sent mstb will remain unset, so check for this. Cc: Dave Airlie <airlied@redhat.com> Cc: Lyude <lyude@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170719114330.26540-3-imre.deak@intel.com
2017-07-20drm/mst: Fix error handling during MST sideband message receptionImre Deak1-2/+8
Handle any error due to partial reads, timeouts etc. to avoid parsing uninitialized data subsequently. Also bail out if the parsing itself fails. Cc: Dave Airlie <airlied@redhat.com> Cc: Lyude <lyude@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170719114330.26540-2-imre.deak@intel.com
2017-07-19net: tehuti: don't process data if it has not been copied from userspaceColin Ian King1-0/+2
The array data is only populated with valid information from userspace if cmd != SIOCDEVPRIVATE, other cases the array contains garbage on the stack. The subsequent switch statement acts on a subcommand in data[0] which could be any garbage value if cmd is SIOCDEVPRIVATE which seems incorrect to me. Instead, just return EOPNOTSUPP for the case where cmd == SIOCDEVPRIVATE to avoid this issue. As a side note, I suspect that the original intention of the code was for this ioctl to work just for cmd == SIOCDEVPRIVATE (and the current logic is reversed). However, I don't wont to change the current semantics in case any userspace code relies on this existing behaviour. Detected by CoverityScan, CID#139647 ("Uninitialized scalar variable") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19net: dsa: mv88e6xxx: Enable CMODE config support for 6390XMartin Hundebøll1-0/+1
Commit f39908d3b1c45 ('net: dsa: mv88e6xxx: Set the CMODE for mv88e6390 ports 9 & 10') added support for setting the CMODE for the 6390X family, but only enabled it for 9290 and 6390 - and left out 6390X. Fix support for setting the CMODE on 6390X also by assigning mv88e6390x_port_set_cmode() to the .port_set_cmode function pointer in mv88e6390x_ops too. Fixes: f39908d3b1c4 ("net: dsa: mv88e6xxx: Set the CMODE for mv88e6390 ports 9 & 10") Signed-off-by: Martin Hundebøll <mnhu@prevas.dk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19NET: dwmac: Make dwmac reset unconditionalEugeniy Paltsev1-1/+8
Unconditional reset dwmac before HW init if reset controller is present. In existing implementation we reset dwmac only after second module probing: (module load -> unload -> load again [reset happens]) Now we reset dwmac at every module load: (module load [reset happens] -> unload -> load again [reset happens]) Also some reset controllers have only reset callback instead of assert + deassert callbacks pair, so handle this case. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19PM / Domains: defer dev_pm_domain_set() until genpd->attach_dev succeeds if ↵Sudeep Holla1-4/+4
present If the genpd->attach_dev or genpd->power_on fails, genpd_dev_pm_attach may return -EPROBE_DEFER initially. However genpd_alloc_dev_data sets the PM domain for the device unconditionally. When subsequent attempts are made to call genpd_dev_pm_attach, it may return -EEXISTS checking dev->pm_domain without re-attempting to call attach_dev or power_on. platform_drv_probe then attempts to call drv->probe as the return value -EEXIST != -EPROBE_DEFER, which may end up in a situation where the device is accessed without it's power domain switched on. Fixes: f104e1e5ef57 (PM / Domains: Re-order initialization of generic_pm_domain_data) Cc: 4.4+ <stable@vger.kernel.org> # v4.4+ Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-19Merge tag 'fixes-for-v4.13-rc2' of ↵Greg Kroah-Hartman12-55/+87
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v4.13-rc2 First set of fixes for the current -rc cycle. Only three fixes on dwc3 this time around (proper order for getting a PHY reference, fix for unmapping DMA and a fix for requesting IRQ on the OMAP glue layer). Most fixes are on the renesas USB controller, fixing several old bugs with most going to stable. dwc2 also learned that it *must* reset USB Address to zero on Reset interrupts. Apart from these, some drivers needed HAS_DMA dependency and there's a sparse warning fix for bdc udc.
2017-07-19usb: renesas_usbhs: gadget: disable all eps when the driver stopsYoshihiro Shimoda1-7/+24
A gadget driver will not disable eps immediately when ->disconnect() is called. But, since this driver assumes all eps stop after the ->disconnect(), unexpected behavior happens (especially in system suspend). So, this patch disables all eps in usbhsg_try_stop(). After disabling eps by renesas_usbhs driver, since some functions will be called by both a gadget and renesas_usbhs driver, renesas_usbhs driver should protect uep->pipe. To protect uep->pipe easily, this patch adds a new lock in struct usbhsg_uep. Fixes: 2f98382dc ("usb: renesas_usbhs: Add Renesas USBHS Gadget") Cc: <stable@vger.kernel.org> # v3.0+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-07-19usb: renesas_usbhs: fix usbhsc_resume() for !USBHSF_RUNTIME_PWCTRLYoshihiro Shimoda1-1/+3
This patch fixes an issue that some registers may be not initialized after resume if the USBHSF_RUNTIME_PWCTRL is not set. Otherwise, if a cable is not connected, the driver will not enable INTENB0.VBSE after resume. And then, the driver cannot detect the VBUS. Fixes: ca8a282a5373 ("usb: gadget: renesas_usbhs: add suspend/resume support") Cc: <stable@vger.kernel.org> # v3.2+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-07-18device-dax: fix sysfs duplicate warningsDan Williams3-14/+24
Fix warnings of the form... WARNING: CPU: 10 PID: 4983 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x62/0x80 sysfs: cannot create duplicate filename '/class/dax/dax12.0' Call Trace: dump_stack+0x63/0x86 __warn+0xcb/0xf0 warn_slowpath_fmt+0x5a/0x80 ? kernfs_path_from_node+0x4f/0x60 sysfs_warn_dup+0x62/0x80 sysfs_do_create_link_sd.isra.2+0x97/0xb0 sysfs_create_link+0x25/0x40 device_add+0x266/0x630 devm_create_dax_dev+0x2cf/0x340 [dax] dax_pmem_probe+0x1f5/0x26e [dax_pmem] nvdimm_bus_probe+0x71/0x120 ...by reusing the namespace id for the device-dax instance name. Now that we have decided that there will never by more than one device-dax instance per libnvdimm-namespace parent device [1], we can directly reuse the namepace ids. There are some possible follow-on cleanups, but those are saved for a later patch to simplify the -stable backport. [1]: https://lists.01.org/pipermail/linux-nvdimm/2016-December/008266.html Fixes: 98a29c39dc68 ("libnvdimm, namespace: allow creation of multiple pmem...") Cc: Jeff Moyer <jmoyer@redhat.com> Cc: <stable@vger.kernel.org> Reported-by: Dariusz Dokupil <dariusz.dokupil@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-07-18irqchip/digicolor: Drop unnecessary staticJulia Lawall1-1/+1
Drop static on a local variable, when the variable is initialized before any possible use. Thus, the static has no benefit. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @bad exists@ position p; identifier x; type T; @@ static T x@p; ... x = <+...x...+> @@ identifier x; expression e; type T; position p != bad.p; @@ -static T x@p; ... when != x when strict ?x = e; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Baruch Siach <baruch@tkos.co.il> Cc: keescook@chromium.org Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kernel-janitors@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1500149266-32357-11-git-send-email-Julia.Lawall@lip6.fr
2017-07-18irqchip/mips-cpu: Drop unnecessary staticJulia Lawall1-1/+1
Drop static on a local variable, when the variable is initialized before any possible use. Thus, the static has no benefit. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @bad exists@ position p; identifier x; type T; @@ static T x@p; ... x = <+...x...+> @@ identifier x; expression e; type T; position p != bad.p; @@ -static T x@p; ... when != x when strict ?x = e; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kernel-janitors@vger.kernel.org Cc: keescook@chromium.org Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1500149266-32357-7-git-send-email-Julia.Lawall@lip6.fr
2017-07-18irqchip/gic/realview: Drop unnecessary staticJulia Lawall1-1/+1
Drop static on a local variable, when the variable is initialized before any possible use. Thus, the static has no benefit. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @bad exists@ position p; identifier x; type T; @@ static T x@p; ... x = <+...x...+> @@ identifier x; expression e; type T; position p != bad.p; @@ -static T x@p; ... when != x when strict ?x = e; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kernel-janitors@vger.kernel.org Cc: keescook@chromium.org Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1500149266-32357-6-git-send-email-Julia.Lawall@lip6.fr
2017-07-18Merge tag 'md/4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds4-6/+7
Pull MD fixes from Shaohua Li: - raid5-ppl fix by Artur. This one is introduced in this release cycle. - raid5 reshape fix by Xiao. This is an old bug and will be added to stable. - bitmap fix by Guoqing. * tag 'md/4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: raid5-ppl: use BIOSET_NEED_BVECS when creating bioset Raid5 should update rdev->sectors after reshape md/bitmap: don't read page from device with Bitmap_sync
2017-07-18atm: zatm: Fix an error handling path in 'zatm_init_one()'Christophe Jaillet1-1/+1
If 'dma_set_mask_and_coherent()' fails, we must undo the previous 'pci_request_regions()' call. Adjust corresponding 'goto' to jump at the right place of the error handling path. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-18ppp: Fix false xmit recursion detect with two ppp devicesGao Feng1-9/+21
The global percpu variable ppp_xmit_recursion is used to detect the ppp xmit recursion to avoid the deadlock, which is caused by one CPU tries to lock the xmit lock twice. But it would report false recursion when one CPU wants to send the skb from two different PPP devices, like one L2TP on the PPPoE. It is a normal case actually. Now use one percpu member of struct ppp instead of the gloable variable to detect the xmit recursion of one ppp device. Fixes: 55454a565836 ("ppp: avoid dealock on recursive xmit") Signed-off-by: Gao Feng <gfree.wind@vip.163.com> Signed-off-by: Liu Jianying <jianying.liu@ikuai8.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-18Merge tag 'for-linus' of ↵Linus Torvalds39-280/+335
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: "First set of -rc fixes for 4.13 cycle: - misc iSER fixes - namespace fixups - fix the fact that IPoIB didn't use the proper API for noio mem allocs - rxe driver fixes - hns_roce fixes - misc core fixes - misc IPoIB fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (27 commits) IB/core: Allow QP state transition from reset to error IB/hns: Fix for checkpatch.pl comment style warnings IB/hns: Fix the bug with modifying the MAC address without removing the driver IB/hns: Fix the bug with rdma operation IB/hns: Fix the bug with wild pointer when destroy rc qp IB/hns: Fix the bug of polling cq failed for loopback Qps IB/rxe: Set dma_mask and coherent_dma_mask IB/rxe: Fix kernel panic from skb destructor IB/ipoib: Let lower driver handle get_stats64 call IB/core: Add ordered workqueue for RoCE GID management IB/mlx5: Clean mr_cache debugfs in case of failure IB/core: Remove NOIO QP create flag {net, IB}/mlx4: Remove gfp flags argument IB/{rdmavt, qib, hfi1}: Remove gfp flags argument IB/IPoIB: Convert IPoIB to memalloc_noio_* calls IB/IPoIB: Forward MTU change to driver below IB: Convert msleep below 20ms to usleep_range IB/uverbs: Make use of ib_modify_qp variant to avoid resolving DMAC IB/core: Introduce modify QP operation with udata IB/core: Don't resolve IP address to the loopback device ...
2017-07-18usb: gadget: udc: renesas_usb3: protect usb3_ep->started in usb3_start_pipen()Yoshihiro Shimoda1-3/+3
This patch fixes an issue that unexpected behavior happens when both the interrupt handler and renesas_usb3_ep_enable() are called. In this case, since usb3_start_pipen() checked the usb3_ep->started, but the flags was not protected. So, this patch protects the flag by usb3->lock. Since renesas_usb3_ep_enable() for EP0 will be not called, this patch doesn't take care of usb3_start_pipe0(). Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-07-18usb: gadget: udc: renesas_usb3: fix zlp transfer by the dmacYoshihiro Shimoda1-0/+6
The dedicated dmac can transfer a zero-length-packet (zlp) if some bits of the USB_COM_CON register. However, the commit 2d4aa21a73ba ("usb: gadget: udc: renesas_usb3: add support for dedicated DMAC") didn't set the bits to 1. So, this patch fixes it. Fixes: 2d4aa21a73b ("usb: gadget: udc: renesas_usb3: add support for dedicated DMAC) Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-07-18usb: gadget: udc: renesas_usb3: fix free size in renesas_usb3_dma_free_prd()Yoshihiro Shimoda1-1/+1
The commit 2d4aa21a73ba ("usb: gadget: udc: renesas_usb3: add support for dedicated DMAC") has a bug in the renesas_usb3_dma_free_prd(). The size of dma_free_coherent() should be the same with dma_alloc_coherent() Otherwise, this code causes a WARNING by mm/page_alloc.c when renesas_usb3_dma_free_prd() is called. So, this patch fixes it. Fixes: 2d4aa21a73ba ("usb: gadget: udc: renesas_usb3: add support for dedicated DMAC") Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-07-18irqchip/mips-gic: Remove population of irq domain namesMatt Redfearn1-2/+0
Since commit d59f6617eef0f ("genirq: Allow fwnode to carry name information only") the irqdomain core sets the names of irq domains. When the name is allocated the new IRQ_DOMAIN_NAME_ALLOCATED flag is set. Replacing the allocated name with a constant one is not a good idea, since calling the new irq_domain_update_bus_token() API, added to the MIPS GIC driver by commit 96f0d93a487e1 ("irqchip/MSI: Use irq_domain_update_bus_token instead of an open coded access") will attempt to kfree the pointer, and result in a kernel OOPS. Fix this by removing the names, now that they are set by the irqdomain core. This effectively reverts commit 21c57fd13589 ("irqchip/mips-gic: Populate irq_domain names"). Fixes: d59f6617eef0f ("genirq: Allow fwnode to carry name information only") Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-mips@linux-mips.org Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1500363561-32213-1-git-send-email-matt.redfearn@imgtec.com
2017-07-18staging: rtl8188eu: add TL-WN722N v2 supportMichael Gugino1-0/+1
Add support for USB Device TP-Link TL-WN722N v2. VendorID: 0x2357, ProductID: 0x010c Signed-off-by: Michael Gugino <michael.gugino.2@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-18staging: speakup: safely register and unregister ldiscOkash Khawaja2-6/+4
This patch makes use of functions added in the previous patch. It registers ldisc during init of main speakup module and unregisters it during exit. It also removes the code to register ldisc every time a synth module is loaded. This way we only register the ldisc once when main speakup module is loaded. Since main speakup module is required by all synth modules, it is only unloaded when all synths have been unloaded. Therefore we unregister the ldisc once, when all speakup related references to the ldisc have returned. In unlikely scenario of something outside speakup using the ldisc, the ldisc refcount check in tty_unregister_ldisc will ensure that it is not unregistered while in use. The function to register ldisc doesn't cause speakup init function to fail. That is different from current behaviour where failure to register ldisc results in failure to load the specific synth module. This is because speakup module is also required by those synths which don't use tty and ldisc. We don't want to prevent those modules from loading when ldisc fails to register. The synth modules will correctly fail when trying to set N_SPEAKUP to tty, if ldisc registrationi had failed. Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-18staging: speakup: add functions to register and unregister ldiscOkash Khawaja2-0/+14
This patch adds the above two functions and makes them available to main.c where they will be called during init and exit functions of main speakup module. Following patch will make use of them. Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Powered by cgit, Gruvboxed by Blaster4385.