aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-12-12Merge tag 'irq-core-2022-12-10' of ↵Linus Torvalds54-1029/+1861
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Updates for the interrupt core and driver subsystem: The bulk is the rework of the MSI subsystem to support per device MSI interrupt domains. This solves conceptual problems of the current PCI/MSI design which are in the way of providing support for PCI/MSI[-X] and the upcoming PCI/IMS mechanism on the same device. IMS (Interrupt Message Store] is a new specification which allows device manufactures to provide implementation defined storage for MSI messages (as opposed to PCI/MSI and PCI/MSI-X that has a specified message store which is uniform accross all devices). The PCI/MSI[-X] uniformity allowed us to get away with "global" PCI/MSI domains. IMS not only allows to overcome the size limitations of the MSI-X table, but also gives the device manufacturer the freedom to store the message in arbitrary places, even in host memory which is shared with the device. There have been several attempts to glue this into the current MSI code, but after lengthy discussions it turned out that there is a fundamental design problem in the current PCI/MSI-X implementation. This needs some historical background. When PCI/MSI[-X] support was added around 2003, interrupt management was completely different from what we have today in the actively developed architectures. Interrupt management was completely architecture specific and while there were attempts to create common infrastructure the commonalities were rudimentary and just providing shared data structures and interfaces so that drivers could be written in an architecture agnostic way. The initial PCI/MSI[-X] support obviously plugged into this model which resulted in some basic shared infrastructure in the PCI core code for setting up MSI descriptors, which are a pure software construct for holding data relevant for a particular MSI interrupt, but the actual association to Linux interrupts was completely architecture specific. This model is still supported today to keep museum architectures and notorious stragglers alive. In 2013 Intel tried to add support for hot-pluggable IO/APICs to the kernel, which was creating yet another architecture specific mechanism and resulted in an unholy mess on top of the existing horrors of x86 interrupt handling. The x86 interrupt management code was already an incomprehensible maze of indirections between the CPU vector management, interrupt remapping and the actual IO/APIC and PCI/MSI[-X] implementation. At roughly the same time ARM struggled with the ever growing SoC specific extensions which were glued on top of the architected GIC interrupt controller. This resulted in a fundamental redesign of interrupt management and provided the today prevailing concept of hierarchical interrupt domains. This allowed to disentangle the interactions between x86 vector domain and interrupt remapping and also allowed ARM to handle the zoo of SoC specific interrupt components in a sane way. The concept of hierarchical interrupt domains aims to encapsulate the functionality of particular IP blocks which are involved in interrupt delivery so that they become extensible and pluggable. The X86 encapsulation looks like this: |--- device 1 [Vector]---[Remapping]---[PCI/MSI]--|... |--- device N where the remapping domain is an optional component and in case that it is not available the PCI/MSI[-X] domains have the vector domain as their parent. This reduced the required interaction between the domains pretty much to the initialization phase where it is obviously required to establish the proper parent relation ship in the components of the hierarchy. While in most cases the model is strictly representing the chain of IP blocks and abstracting them so they can be plugged together to form a hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the hardware it's clear that the actual PCI/MSI[-X] interrupt controller is not a global entity, but strict a per PCI device entity. Here we took a short cut on the hierarchical model and went for the easy solution of providing "global" PCI/MSI domains which was possible because the PCI/MSI[-X] handling is uniform across the devices. This also allowed to keep the existing PCI/MSI[-X] infrastructure mostly unchanged which in turn made it simple to keep the existing architecture specific management alive. A similar problem was created in the ARM world with support for IP block specific message storage. Instead of going all the way to stack a IP block specific domain on top of the generic MSI domain this ended in a construct which provides a "global" platform MSI domain which allows overriding the irq_write_msi_msg() callback per allocation. In course of the lengthy discussions we identified other abuse of the MSI infrastructure in wireless drivers, NTB etc. where support for implementation specific message storage was just mindlessly glued into the existing infrastructure. Some of this just works by chance on particular platforms but will fail in hard to diagnose ways when the driver is used on platforms where the underlying MSI interrupt management code does not expect the creative abuse. Another shortcoming of today's PCI/MSI-X support is the inability to allocate or free individual vectors after the initial enablement of MSI-X. This results in an works by chance implementation of VFIO (PCI pass-through) where interrupts on the host side are not set up upfront to avoid resource exhaustion. They are expanded at run-time when the guest actually tries to use them. The way how this is implemented is that the host disables MSI-X and then re-enables it with a larger number of vectors again. That works by chance because most device drivers set up all interrupts before the device actually will utilize them. But that's not universally true because some drivers allocate a large enough number of vectors but do not utilize them until it's actually required, e.g. for acceleration support. But at that point other interrupts of the device might be in active use and the MSI-X disable/enable dance can just result in losing interrupts and therefore hard to diagnose subtle problems. Last but not least the "global" PCI/MSI-X domain approach prevents to utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact that IMS is not longer providing a uniform storage and configuration model. The solution to this is to implement the missing step and switch from global PCI/MSI domains to per device PCI/MSI domains. The resulting hierarchy then looks like this: |--- [PCI/MSI] device 1 [Vector]---[Remapping]---|... |--- [PCI/MSI] device N which in turn allows to provide support for multiple domains per device: |--- [PCI/MSI] device 1 |--- [PCI/IMS] device 1 [Vector]---[Remapping]---|... |--- [PCI/MSI] device N |--- [PCI/IMS] device N This work converts the MSI and PCI/MSI core and the x86 interrupt domains to the new model, provides new interfaces for post-enable allocation/free of MSI-X interrupts and the base framework for PCI/IMS. PCI/IMS has been verified with the work in progress IDXD driver. There is work in progress to convert ARM over which will replace the platform MSI train-wreck. The cleanup of VFIO, NTB and other creative "solutions" are in the works as well. Drivers: - Updates for the LoongArch interrupt chip drivers - Support for MTK CIRQv2 - The usual small fixes and updates all over the place" * tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (134 commits) irqchip/ti-sci-inta: Fix kernel doc irqchip/gic-v2m: Mark a few functions __init irqchip/gic-v2m: Include arm-gic-common.h irqchip/irq-mvebu-icu: Fix works by chance pointer assignment iommu/amd: Enable PCI/IMS iommu/vt-d: Enable PCI/IMS x86/apic/msi: Enable PCI/IMS PCI/MSI: Provide pci_ims_alloc/free_irq() PCI/MSI: Provide IMS (Interrupt Message Store) support genirq/msi: Provide constants for PCI/IMS support x86/apic/msi: Enable MSI_FLAG_PCI_MSIX_ALLOC_DYN PCI/MSI: Provide post-enable dynamic allocation interfaces for MSI-X PCI/MSI: Provide prepare_desc() MSI domain op PCI/MSI: Split MSI-X descriptor setup genirq/msi: Provide MSI_FLAG_MSIX_ALLOC_DYN genirq/msi: Provide msi_domain_alloc_irq_at() genirq/msi: Provide msi_domain_ops:: Prepare_desc() genirq/msi: Provide msi_desc:: Msi_data genirq/msi: Provide struct msi_map x86/apic/msi: Remove arch_create_remap_msi_irq_domain() ...
2022-12-12Merge branches 'clk-mediatek', 'clk-trace', 'clk-qcom' and 'clk-microchip' ↵Stephen Boyd50-2543/+10524
into clk-next - Tracepoints for clk_rate_request structures * clk-mediatek: clk: mediatek: fix dependency of MT7986 ADC clocks clk: mediatek: Change PLL register API for MT8186 clk: mediatek: Add new clock driver to handle FHCTL hardware dt-bindings: clock: mediatek: Add new bindings of MediaTek frequency hopping clk: mediatek: Export PLL operations symbols clk: mediatek: mt8186-topckgen: Add GPU clock mux notifier clk: mediatek: mt8186-mfg: Propagate rate changes to parent clk: mediatek: mt8195-topckgen: Drop flags for main/univpll fixed factors clk: mediatek: mt8192: Drop flags for main/univpll fixed factors clk: mediatek: mt6795-topckgen: Drop flags for main/sys/univpll fixed factors clk: mediatek: mt8173: Drop flags for main/sys/univpll fixed factors clk: mediatek: mt8183: Drop flags for sys/univpll fixed factors clk: mediatek: mt8183: Compress top_divs array entries clk: mediatek: mt8186-topckgen: Drop flags for main/univpll fixed factors clk: mediatek: clk-mtk: Allow specifying flags on mtk_fixed_factor clocks * clk-trace: clk: Add trace events for rate requests clk: Store clk_core for clk_rate_request * clk-qcom: (69 commits) clk: qcom: rpmh: add support for SM6350 rpmh IPA clock clk: qcom: mmcc-msm8974: use parent_hws/_data instead of parent_names clk: qcom: mmcc-msm8974: move clock parent tables down clk: qcom: mmcc-msm8974: use ARRAY_SIZE instead of specifying num_parents clk: qcom: gcc-msm8974: use parent_hws/_data instead of parent_names clk: qcom: gcc-msm8974: move clock parent tables down clk: qcom: gcc-msm8974: use ARRAY_SIZE instead of specifying num_parents dt-bindings: clocks: qcom,mmcc: define clocks/clock-names for MSM8974 dt-bindings: clock: split qcom,gcc-msm8974,-msm8226 to the separate file clk: qcom: gcc-ipq4019: switch to devm_clk_notifier_register clk: qcom: rpmh: remove usage of platform name clk: qcom: rpmh: rename VRM clock data clk: qcom: rpmh: rename ARC clock data clk: qcom: rpmh: support separate symbol name for the RPMH clocks clk: qcom: rpmh: remove platform names from BCM clocks clk: qcom: rpmh: drop all _ao names clk: qcom: rpmh: reuse common duplicate clocks clk: qcom: rpmh: group clock definitions together clk: qcom: rpm: drop the platform from clock definitions clk: qcom: rpm: drop the _clk suffix completely ... * clk-microchip: clk: microchip: enable the MPFS clk driver by default if SOC_MICROCHIP_POLARFIRE clk: microchip: check for null return of devm_kzalloc()
2022-12-12Merge branches 'clk-spear', 'clk-fract', 'clk-rockchip' and 'clk-imx' into ↵Stephen Boyd25-182/+4006
clk-next - Debugfs support for fractional divider clk * clk-spear: clk: spear: Fix SSP clock definition on SPEAr600 clk: spear: Fix CLCD clock definition on SPEAr600 * clk-fract: clk: fractional-divider: Regroup inclusions clk: fractional-divider: Show numerator and denominator in debugfs clk: fractional-divider: Split out clk_fd_get_div() helper * clk-rockchip: clk: rockchip: Fix memory leak in rockchip_clk_register_pll() clk: rockchip: add clock controller for the RK3588 clk: rockchip: add lookup table support clk: rockchip: simplify rockchip_clk_add_lookup clk: rockchip: allow additional mux options for cpu-clock frequency changes clk: rockchip: add pll type for RK3588 clk: rockchip: add register offset of the cores select parent dt-bindings: clock: add rk3588 cru bindings dt-bindings: reset: add rk3588 reset definitions dt-bindings: clock: add rk3588 clock definitions clk: rockchip: use proper crypto0 name on rk3399 * clk-imx: clk: imx: rename imx_obtain_fixed_clk_hw() to imx_get_clk_hw_by_name() clk: imx8mn: fix imx8mn_enet_phy_sels clocks list clk: imx8mn: fix imx8mn_sai2_sels clocks list clk: imx: rename video_pll1 to video_pll clk: imx: replace osc_hdmi with dummy clk: imx8mn: rename vpu_pll to m7_alt_pll clk: imx: imxrt1050: add IMXRT1050_CLK_LCDIF_PIX clock gate clk: imx: imxrt1050: fix IMXRT1050_CLK_LCDIF_APB offsets clk: imx8mp: Add audio shared gate dt-bindings: clock: imx8mp: Add ids for the audio shared gate clk: imx: pll14xx: Add 320 MHz and 640 MHz entries for PLL146x clk: imx93: keep sys ctr clock always on clk: imx: keep hsio bus clock always on clk: imx93: drop tpm1/3, lpit1/2 clk dt-bindings: clock: imx93: drop TPM1/3 LPIT1/2 entry clk: imx93: correct enet clock clk: imx93: unmap anatop base in error handling path clk: imx: imx8mp: add shared clk gate for usb suspend clk dt-bindings: clocks: imx8mp: Add ID for usb suspend clock clk: imx93: correct the flexspi1 clock setting
2022-12-12Merge branches 'clk-bindings', 'clk-renesas', 'clk-amlogic', 'clk-allwinner' ↵Stephen Boyd24-116/+156
and 'clk-ti' into clk-next * clk-bindings: dt-bindings: clock: ti,cdce925: Convert to DT schema * clk-renesas: (26 commits) clk: renesas: r8a779f0: Fix Ethernet Switch clocks clk: renesas: r8a779g0: Add Z0 clock support clk: renesas: r8a779g0: Add CMT clocks clk: renesas: r8a779g0: Add TMU and SASYNCRT clocks clk: renesas: r8a779f0: Fix SCIF parent clocks clk: renesas: r8a779f0: Fix HSCIF parent clocks clk: renesas: r9a06g032: Repair grave increment error clk: renesas: rzg2l: Don't assume all CPG_MOD clocks support PM clk: renesas: rzg2l: Fix typo in struct rzg2l_cpg_priv kerneldoc clk: renesas: r8a779a0: Fix SD0H clock name clk: renesas: r8a779g0: Add RPC-IF clock clk: renesas: r8a779g0: Add SDHI clocks clk: renesas: r8a779f0: Add SASYNCPER internal clock clk: renesas: r8a779f0: Fix SD0H clock name clk: renesas: r9a07g043: Drop WDT2 clock and reset entry clk: renesas: r9a07g044: Drop WDT2 clock and reset entry clk: renesas: r8a779g0: Add TPU clock clk: renesas: r8a779g0: Add PWM clock clk: renesas: r8a779g0: Add SCIF clocks clk: renesas: r9a07g044: Add MTU3a clock and reset entry ... * clk-amlogic: clk: meson: pll: add pcie lock retry workaround clk: meson: pll: adjust timeout in meson_clk_pll_wait_lock() * clk-allwinner: clk: sunxi-ng: f1c100s: Add IR mod clock clk: sunxi-ng: v3s: Correct the header guard of ccu-sun8i-v3s.h * clk-ti: clk: ti: fix typo in ti_clk_retry_init() code comment clk: ti: dra7-atl: don't allocate `parent_names' variable clk: ti: change ti_clk_register[_omap_hw]() API
2022-12-12Merge branches 'clk-x86', 'clk-xilinx', 'clk-cleanup', 'clk-mstar' and ↵Stephen Boyd29-223/+842
'clk-ingenic' into clk-next - Make MxL's CGU driver secure compatible - Support for CPU PLL on MStar/SigmaStar SoCs - Ingenic JZ4755 SoC clk support - Support audio clks on X1000 SoCs * clk-x86: clk: mxl: syscon_node_to_regmap() returns error pointers clk: mxl: Fix a clk entry by adding relevant flags clk: mxl: Add option to override gate clks clk: mxl: Remove redundant spinlocks clk: mxl: Switch from direct readl/writel based IO to regmap based IO * clk-xilinx: clk: xilinx: Drop duplicate depends on COMMON_CLK * clk-cleanup: clk: nomadik: correct struct name kernel-doc warning clk: lmk04832: fix kernel-doc warnings clk: lmk04832: drop superfluous #include clk: lmk04832: drop unnecessary semicolons clk: lmk04832: declare variables as const when possible clk: socfpga: Fix memory leak in socfpga_gate_init() clk: st: Fix memory leak in st_of_quadfs_setup() clk: samsung: Fix memory leak in _samsung_clk_register_pll() clk: visconti: Fix memory leak in visconti_register_pll() clk: Remove a useless include clk: samsung: Fix reference to CLK_OF_DECLARE in comment clk: stm32mp1: Staticize ethrx_src clk: keystone: syscon-clk: Use dev_err_probe() helper clk: bulk: Use dev_err_probe() helper in __clk_bulk_get() clk: cdce925: simplify using devm_regulator_get_enable() * clk-mstar: clk: mstar: msc313 cpupll clk driver * clk-ingenic: clk: Add Ingenic JZ4755 CGU driver dt-bindings: clock: Add Ingenic JZ4755 CGU header dt-bindings: ingenic: Add support for the JZ4755 CGU clk: ingenic: Minor cosmetic fixups for X1000 clk: ingenic: Add X1000 audio clocks dt-bindings: ingenic,x1000-cgu: Add audio clocks clk: ingenic: Add .set_rate_hook() for PLL clocks clk: ingenic: Make PLL clock enable_bit and stable_bit optional clk: ingenic: Make PLL clock "od" field optional
2022-12-12Merge tag 's390-6.2-1' of ↵Linus Torvalds19-160/+277
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Alexander Gordeev: - Factor out handle_write() function and simplify 3215 console write operation - When 3170 terminal emulator is connected to the 3215 console driver the boot time could be very long due to limited buffer space or missing operator input. Add con3215_drop command line parameter and con3215_drop sysfs attribute file to instruct the kernel drop console data when such conditions are met - Fix white space errors in 3215 console driver - Move enum paiext_mode definition to a header file and rename it to paievt_mode to indicate this is now used for several events. Rename PAI_MODE_COUNTER to PAI_MODE_COUNTING to make consistent with PAI_MODE_SAMPLING - Simplify the logic of PMU pai_crypto mapped buffer reference counter and make it consistent with PMU pai_ext - Rename PMU pai_crypto mapped buffer structure member users to active_events to make it consistent with PMU pai_ext - Enable HUGETLB_PAGE_OPTIMIZE_VMEMMAP configuration option. This results in saving of 12K per 1M hugetlb page (~1.2%) and 32764K per 2G hugetlb page (~1.6%) - Use generic serial.h, bugs.h, shmparam.h and vga.h header files and scrap s390-specific versions - The generic percpu setup code does not expect the s390-like implementation and emits a warning. To get rid of that warning and provide sane CPU-to-node and CPU-to-CPU distance mappings implementat a minimal version of setup_per_cpu_areas() - Use kstrtobool() instead of strtobool() for re-IPL sysfs device attributes - Avoid unnecessary lookup of a pointer to MSI descriptor when setting IRQ affinity for a PCI device - Get rid of "an incompatible function type cast" warning by changing debug_sprintf_format_fn() function prototype so it matches the debug_format_proc_t function type - Remove unused info_blk_hdr__pcpus() and get_page_state() functions - Get rid of clang "unused unused insn cache ops function" warning by moving s390_insn definition to a private header - Get rid of clang "unused function" warning by making function raw3270_state_final() only available if CONFIG_TN3270_CONSOLE is enabled - Use kstrobool() to parse sclp_con_drop parameter to make it identical to the con3215_drop parameter and allow passing values like "yes" and "true" - Use sysfs_emit() for all SCLP sysfs show functions, which is the current standard way to generate output strings - Make SCLP con_drop sysfs attribute also writable and allow to change its value during runtime. This makes SCLP console drop handling consistent with the 3215 device driver - Virtual and physical addresses are indentical on s390. However, there is still a confusion when pointers are directly casted to physical addresses or vice versa. Use correct address converters virt_to_phys() and phys_to_virt() for s390 channel IO drivers - Support for power managemant has been removed from s390 since quite some time. Remove unused power managemant code from the appldata device driver - Allow memory tools like KASAN see memory accesses from the checksum code. Switch to GENERIC_CSUM if KASAN is enabled, just like x86 does - Add support of ECKD DASDs disks so it could be used as boot and dump devices - Follow checkpatch recommendations and use octal values instead of S_IRUGO and S_IWUSR for dump device attributes in sysfs - Changes to vx-insn.h do not cause a recompile of C files that use asm(".include \"asm/vx-insn.h\"\n") magic to access vector instruction macros from inline assemblies. Add wrapper include header file to avoid this problem - Use vector instruction macros instead of byte patterns to increase register validation routine readability - The current machine check register validation handling does not take into account various scenarios and might lead to killing a wrong user process or potentially ignore corrupted FPU registers. Simplify logic of the machine check handler and stop the whole machine if the previous context was kerenel mode. If the previous context was user mode, kill the current task - Introduce sclp_emergency_printk() function which can be used to emit a message in emergency cases. It is supposed to be used in cases where regular console device drivers may not work anymore, e.g. unrecoverable machine checks Keep the early Service-Call Control Block so it can also be used after initdata has been freed to allow sclp_emergency_printk() implementation - In case a system will be stopped because of an unrecoverable machine check error print the machine check interruption code to give a hint of what went wrong - Move storage error checking from the assembly entry code to C in order to simplify machine check handling. Enter the handler with DAT turned on, which simplifies the entry code even more - The machine check extended save areas are allocated using a private "nmi_save_areas" slab cache which guarantees a required power-of-two alignment. Get rid of that cache in favour of kmalloc() * tag 's390-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (38 commits) s390/nmi: get rid of private slab cache s390/nmi: move storage error checking back to C, enter with DAT on s390/nmi: print machine check interruption code before stopping system s390/sclp: introduce sclp_emergency_printk() s390/sclp: keep sclp_early_sccb s390/nmi: rework register validation handling s390/nmi: use vector instruction macros instead of byte patterns s390/vx: add vx-insn.h wrapper include file s390/ipl: use octal values instead of S_* macros s390/ipl: add eckd dump support s390/ipl: add eckd support vfio/ccw: identify CCW data addresses as physical vfio/ccw: sort out physical vs virtual pointers usage s390/checksum: support GENERIC_CSUM, enable it for KASAN s390/appldata: remove power management callbacks s390/cio: sort out physical vs virtual pointers usage s390/sclp: allow to change sclp_console_drop during runtime s390/sclp: convert to use sysfs_emit() s390/sclp: use kstrobool() to parse sclp_con_drop parameter s390/3270: make raw3270_state_final() depend on CONFIG_TN3270_CONSOLE ...
2022-12-12Merge tag 'mips_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds2-2/+1
Pull MIPS updates from Thomas Bogendoerfer: - DT cleanups - fix for early use of kzalloc on mt7621 platform - cleanups and fixes * tag 'mips_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (21 commits) MIPS: OCTEON: warn only once if deprecated link status is being used MIPS: BCM63xx: Add check for NULL for clk in clk_enable platform/mips: Adjust Kconfig to keep consistency MIPS: OCTEON: cvmx-bootmem: use strscpy() to instead of strncpy() MIPS: mscc: jaguar2: Fix pca9545 i2c-mux node names mips/pci: use devm_platform_ioremap_resource() mips: ralink: mt7621: do not use kzalloc too early mips: ralink: mt7621: soc queries and tests as functions mips: ralink: mt7621: define MT7621_SYSC_BASE with __iomem MIPS: Restore symbol versions for copy_page_cpu and clear_page_cpu mips: dts: remove label = "cpu" from DSA dt-binding mips: ralink: mt7621: change DSA port labels to generic naming mips: ralink: mt7621: fix phy-mode of external phy on GB-PC2 MIPS: vpe-cmp: fix possible memory leak while module exiting MIPS: vpe-mt: fix possible memory leak while module exiting dt-bindings: mips: brcm: add Broadcom SoCs bindings dt-bindings: mips: add CPU bindings for MIPS architecture mips: dts: brcm: bcm7435: add "interrupt-names" for NAND controller mips: dts: bcm63268: add TWD block timer MIPS: Use "grep -E" instead of "egrep" ...
2022-12-12Merge tag 'for-linus-6.2-rc1-tag' of ↵Linus Torvalds2-48/+59
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - fix memory leaks in error paths - add support for virtio PCI-devices in Xen guests on ARM - two minor fixes * tag 'for-linus-6.2-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/privcmd: Fix a possible warning in privcmd_ioctl_mmap_resource() x86/xen: Fix memory leak in xen_init_lock_cpu() x86/xen: Fix memory leak in xen_smp_intr_init{_pv}() xen: fix xen.h build for CONFIG_XEN_PVH=y xen/virtio: Handle PCI devices which Host controller is described in DT xen/virtio: Optimize the setup of "xen-grant-dma" devices
2022-12-12Merge tag 'tag-chrome-platform-for-v6.2' of ↵Linus Torvalds13-29/+195
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Tzung-Bi Shih: "New drivers - Driver for ChromeOS human presence sensor Cleanups: - Add missing property in dt-binding example. - Update the availability of properties in dt-binding. - Separate dt-binding for ChromeOS fingerprint sensor. Improvements: - Set PROBE_PREFER_ASYNCHRONOUS for some drivers for shortening boot time. Fixes: - Fix an use-after-free in cros_ec_typec. And minor fixes and cleanups" * tag 'tag-chrome-platform-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec_typec: zero out stale pointers platform/chrome: cros_usbpd_notify: Fix error handling in cros_usbpd_notify_init() platform/chrome: cros_ec: Convert to i2c's .probe_new() platform/chrome: cros_ec_lpc: Force synchronous probe platform/chrome: cros_ec_spi: Set PROBE_PREFER_ASYNCHRONOUS platform/chrome: cros_ec_lightbar: Set PROBE_PREFER_ASYNCHRONOUS platform/chrome: cros_ec_debugfs: Set PROBE_PREFER_ASYNCHRONOUS platform/chrome: cros_ec_lpc: Mark PROBE_PREFER_ASYNCHRONOUS platform/chrome: cros_ec_lpc: Move mec_init to device probe platform/chrome: Use kstrtobool() instead of strtobool() platform/chrome: cros_ec_lpc_mec: remove cros_ec_lpc_mec_destroy() dt-bindings: cros-ec: Add ChromeOS fingerprint binding dt-bindings: cros-ec: Reorganize and enforce property availability platform/chrome: cros_hps_i2c: make remove callback return void platform/chrome: add a driver for HPS
2022-12-12Merge tag 'platform-drivers-x86-v6.2-1' of ↵Linus Torvalds43-1342/+2630
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: - Intel: - PMC: Add support for Meteor Lake - Intel On Demand: various updates - Ideapad-laptop: - Add support for various Fn keys on new models - Fix touchpad on/off handling in a generic way to avoid having to add more and more quirks - Android x86 tablets: - Add support for two more X86 Android tablet models - New Dell WMI DDV driver - Miscellaneous cleanups and small bugfixes * tag 'platform-drivers-x86-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (52 commits) platform/mellanox: mlxbf-pmc: Fix event typo platform/x86: intel_scu_ipc: fix possible name leak in __intel_scu_ipc_register() platform/x86: sony-laptop: Convert to use sysfs_emit_at() API platform/x86/dell: alienware-wmi: Use sysfs_emit() instead of scnprintf() platform/x86: uv_sysfs: Use sysfs_emit() instead of scnprintf() platform/x86: mxm-wmi: fix memleak in mxm_wmi_call_mx[ds|mx]() platform/x86: x86-android-tablets: Add Advantech MICA-071 extra button platform/x86: x86-android-tablets: Add Lenovo Yoga Tab 3 (YT3-X90F) charger + fuel-gauge data platform/x86: x86-android-tablets: Add Medion Lifetab S10346 data platform/x86: wireless-hotkey: use ACPI HID as phys platform/x86/intel/hid: Add module-params for 5 button array + SW_TABLET_MODE reporting platform/x86: ideapad-laptop: Make touchpad_ctrl_via_ec a module option platform/x86: ideapad-laptop: Stop writing VPCCMD_W_TOUCHPAD at probe time platform/x86: ideapad-laptop: Send KEY_TOUCHPAD_TOGGLE on some models platform/x86: ideapad-laptop: Only toggle ps2 aux port on/off on select models platform/x86: ideapad-laptop: Do not send KEY_TOUCHPAD* events on probe / resume platform/x86: ideapad-laptop: Refactor ideapad_sync_touchpad_state() tools/arch/x86: intel_sdsi: Add support for reading meter certificates tools/arch/x86: intel_sdsi: Add support for new GUID tools/arch/x86: intel_sdsi: Read more On Demand registers ...
2022-12-12Merge branch 'next' into for-linusDmitry Torokhov5568-112888/+333264
Prepare input updates for 6.2 merge window.
2022-12-12Merge tag 'soc-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds38-60/+66
Pull ARM SoC DT updates from Arnd Bergmann: "The devicetree changes contain exactly 1000 non-merge changesets, including a number of new arm64 SoC variants from Qualcomm and Apple, as well as the Renesas r9a07g043f/u chip in both arm64 and riscv variants. While we have occasionally merged support for non-arm SoCs in the past, this is now the normal path for riscv devicetree files. The most notable changes, by SoC platform, are: - The Apple T6000 (M1 Pro), T6001 (M1 Max) and T6002 (M1 Ultra) chips now have initial support. This is particularly nice as I am typing this on a T6002 Mac Studio with only a small number of driver patches. - Qualcomm MSM8996 Pro (Snapdragon 821), SM6115 (Snapdragon 662), SM4250 (Snapdragon 460), SM6375 (Snapdragon 695), SDM670 (Snapdragon 670), MSM8976 (Snapdragon 652) and MSM8956 (Snapdragon 650) are all mobile phone chips that are closely related to others we already support. Adding those helps support more phones and we add several models from Sony (Xperia 10 IV, 5 IV, X, and X compact), OnePlus (One, 3, 3T, and Nord N100), Xiaomi (Poco F1, Mi6), Huawei (Watch) and Google (Pixel 3a). There are also new variants of the Herobrine and Trogdor chromebook motherboards. SA8540P is an automotive SoC used in the Qdrive-3 development platform - Rockchips gains no new SoC variants, but a lot of new boards: three mobile gaming systems based on RK3326 Odroid-Go/rg351 family, two more Anbernic gaming systems based on RK3566 and a number of other RK356x based single-board computers. - Renesas RZ/G2UL (r9a07g043) was already supported for arm64, but as the newly added RZ/Five is based on the same design, this now gets reorganized in order to share most of the dts description between the two and add the RZ/Five SMARC EVK board support. Aside from that, there are the usual changes all over the tree: - New boards on other platforms contain two ASpeed BMC users, two Broadcom based Wifi routers, Zyxel NSA310S NAS, the i.MX6 based Kobo Aura2 ebook reader, two i.MX8 based development boards, two Uniphier Pro5 development boards, the STM32MP1 testbench board from DHCOR, the TI K3 based BeagleBone AI-64 board, and the Mediatek Helio X10 based Sony Xperia M5 phone. - The Starfive JH7100 source gets reorganized in order to support the VisionFive V1 board. - Minor updates and cleanups for Intel SoCFPGA, Marvell PXA168, TI, ST, NXP, Apple, Broadcom, Juno, Marvell MVEBU, at91, nuvoton, Tegra, Mediatek, Renesas, Hisilicon, Allwinner, Samsung, ux500, spear, ... The treewide cleanups now have a lot of fixes for cache nodes and other binding violoations. - Somewhat larger sets of reworks for NVIDIA Tegra, Qualcomm and Renesas platforms, adding a lot more on-chip device support - A rework of the way that DTB overlays are built" * tag 'soc-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (979 commits) arm64: dts: apple: t6002: Fix GPU power domains arm64: dts: apple: t600x-pmgr: Fix search & replace typo arm64: dts: apple: Add t8103 L1/L2 cache properties and nodes arm64: dts: apple: Rename dart-sio* to sio-dart* arch: arm64: apple: t600x: Use standard "iommu" node name arch: arm64: apple: t8103: Use standard "iommu" node name ARM: dts: socfpga: Fix pca9548 i2c-mux node name dt-bindings: iio: adc: qcom,spmi-vadc: fix PM8350 define dt-bindings: iio: adc: qcom,spmi-vadc: extend example arm64: dts: qcom: sc8280xp: fix UFS DMA coherency arm64: dts: qcom: sc7280: Add DT for sc7280-herobrine-zombie arm64: dts: qcom: sm8250-sony-xperia-edo: fix no-mmc property for SDHCI arm64: dts: qcom: sdm845-sony-xperia-tama: fix no-mmc property for SDHCI arm64: dts: qcom: sda660-inforce-ifc6560: fix no-mmc property for SDHCI arm64: dts: qcom: sa8155p-adp: fix no-mmc property for SDHCI arm64: dts: qcom: qrb5165-rb: fix no-mmc property for SDHCI arm64: dts: qcom: sm8450: align MMC node names with dtschema arm64: dts: qcom: sc7180-trogdor: use generic node names arm64: dts: qcom: sm8450-hdk: add sound support arm64: dts: qcom: sm8450: add Soundwire and LPASS ...
2022-12-12Merge tag 'soc-drivers-6.2' of ↵Linus Torvalds71-1143/+2897
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "There are few major updates in the SoC specific drivers, mainly the usual reworks and support for variants of the existing SoC. While this remains Arm centric for the most part, the branch now also contains updates to risc-v and loongarch specific code in drivers/soc/. Notable changes include: - Support for the newly added Qualcomm Snapdragon variants (MSM8956, MSM8976, SM6115, SM4250, SM8150, SA8155 and SM8550) in the soc ID, rpmh, rpm, spm and powerdomain drivers. - Documentation for the somewhat controversial qcom,board-id properties that are required for booting a number of machines - A new SoC identification driver for the loongson-2 (loongarch) platform - memory controller updates for stm32, tegra, and renesas. - a new DT binding to better describe LPDDR2/3/4/5 chips in the memory controller subsystem - Updates for Tegra specific drivers across multiple subsystems, improving support for newer SoCs and better identification - Minor fixes for Broadcom, Freescale, Apple, Renesas, Sifive, TI, Mediatek and Marvell SoC drivers" * tag 'soc-drivers-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (137 commits) soc: qcom: socinfo: Add SM6115 / SM4250 SoC IDs to the soc_id table dt-bindings: arm: qcom,ids: Add SoC IDs for SM6115 / SM4250 and variants soc: qcom: socinfo: Add SM8150 and SA8155 SoC IDs to the soc_id table dt-bindings: arm: qcom,ids: Add SoC IDs for SM8150 and SA8155 dt-bindings: soc: qcom: apr: document generic qcom,apr compatible soc: qcom: Select REMAP_MMIO for ICC_BWMON driver soc: qcom: Select REMAP_MMIO for LLCC driver soc: qcom: rpmpd: Add SM4250 support dt-bindings: power: rpmpd: Add SM4250 support dt-bindings: soc: qcom: aoss: Add compatible for SM8550 soc: qcom: llcc: Add configuration data for SM8550 dt-bindings: arm: msm: Add LLCC compatible for SM8550 soc: qcom: llcc: Add v4.1 HW version support soc: qcom: socinfo: Add SM8550 ID soc: qcom: rpmh-rsc: Avoid unnecessary checks on irq-done response soc: qcom: rpmh-rsc: Add support for RSC v3 register offsets soc: qcom: rpmhpd: Add SM8550 power domains dt-bindings: power: rpmpd: Add SM8550 to rpmpd binding soc: qcom: socinfo: Add MSM8956/76 SoC IDs to the soc_id table dt-bindings: arm: qcom,ids: Add SoC IDs for MSM8956 and MSM8976 ...
2022-12-12Merge tag 'soc-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2-6/+6
Pull ARM SoC code updates from Arnd Bergmann: "This time there are only fairly minor cleanups across the i.MX, ixp4xx, ux500 and renesas platforms. The only notable update is a change to the keystone2 platform to switch switch it over to standard PSCI SMP bringup, which apparently was present in the shipped firmware almost from the start" * tag 'soc-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: ixp4xx: Remove unused debug iomap MAINTAINERS: Add DHCOR to the DH electronic i.MX6 board support ARM: ixp4xx: Remove unused static map MAINTAINERS: adjust ARM/INTEL IXP4XX ARM ARCHITECTURE to ixp4xx clean-up ARM: imx3: Remove unneeded #include <linux/pinctrl/machine.h> ARM: mxs: Remove unneeded #include <linux/pinctrl/consumer.h> riscv: Kconfig.socs: Add ARCH_RENESAS kconfig option ARM: ux500: Drop unused register file ARM: ux500: do not directly dereference __iomem arm/mach-ux500: fix repeated words in comments arm64: renesas: Drop selecting GPIOLIB and PINCTRL ARM: shmobile: Drop selecting GPIOLIB and PINCTRL ARM: keystone: Replace platform SMP with PSCI soc: renesas: Kconfig: Explicitly select GPIOLIB and PINCTRL config under SOC_RENESAS
2022-12-12Merge tag 'arm64-upstream' of ↵Linus Torvalds27-169/+3185
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "The highlights this time are support for dynamically enabling and disabling Clang's Shadow Call Stack at boot and a long-awaited optimisation to the way in which we handle the SVE register state on system call entry to avoid taking unnecessary traps from userspace. Summary: ACPI: - Enable FPDT support for boot-time profiling - Fix CPU PMU probing to work better with PREEMPT_RT - Update SMMUv3 MSI DeviceID parsing to latest IORT spec - APMT support for probing Arm CoreSight PMU devices CPU features: - Advertise new SVE instructions (v2.1) - Advertise range prefetch instruction - Advertise CSSC ("Common Short Sequence Compression") scalar instructions, adding things like min, max, abs, popcount - Enable DIT (Data Independent Timing) when running in the kernel - More conversion of system register fields over to the generated header CPU misfeatures: - Workaround for Cortex-A715 erratum #2645198 Dynamic SCS: - Support for dynamic shadow call stacks to allow switching at runtime between Clang's SCS implementation and the CPU's pointer authentication feature when it is supported (complete with scary DWARF parser!) Tracing and debug: - Remove static ftrace in favour of, err, dynamic ftrace! - Seperate 'struct ftrace_regs' from 'struct pt_regs' in core ftrace and existing arch code - Introduce and implement FTRACE_WITH_ARGS on arm64 to replace the old FTRACE_WITH_REGS - Extend 'crashkernel=' parameter with default value and fallback to placement above 4G physical if initial (low) allocation fails SVE: - Optimisation to avoid disabling SVE unconditionally on syscall entry and just zeroing the non-shared state on return instead Exceptions: - Rework of undefined instruction handling to avoid serialisation on global lock (this includes emulation of user accesses to the ID registers) Perf and PMU: - Support for TLP filters in Hisilicon's PCIe PMU device - Support for the DDR PMU present in Amlogic Meson G12 SoCs - Support for the terribly-named "CoreSight PMU" architecture from Arm (and Nvidia's implementation of said architecture) Misc: - Tighten up our boot protocol for systems with memory above 52 bits physical - Const-ify static keys to satisty jump label asm constraints - Trivial FFA driver cleanups in preparation for v1.1 support - Export the kernel_neon_* APIs as GPL symbols - Harden our instruction generation routines against instrumentation - A bunch of robustness improvements to our arch-specific selftests - Minor cleanups and fixes all over (kbuild, kprobes, kfence, PMU, ...)" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (151 commits) arm64: kprobes: Return DBG_HOOK_ERROR if kprobes can not handle a BRK arm64: kprobes: Let arch do_page_fault() fix up page fault in user handler arm64: Prohibit instrumentation on arch_stack_walk() arm64:uprobe fix the uprobe SWBP_INSN in big-endian arm64: alternatives: add __init/__initconst to some functions/variables arm_pmu: Drop redundant armpmu->map_event() in armpmu_event_init() kselftest/arm64: Allow epoll_wait() to return more than one result kselftest/arm64: Don't drain output while spawning children kselftest/arm64: Hold fp-stress children until they're all spawned arm64/sysreg: Remove duplicate definitions from asm/sysreg.h arm64/sysreg: Convert ID_DFR1_EL1 to automatic generation arm64/sysreg: Convert ID_DFR0_EL1 to automatic generation arm64/sysreg: Convert ID_AFR0_EL1 to automatic generation arm64/sysreg: Convert ID_MMFR5_EL1 to automatic generation arm64/sysreg: Convert MVFR2_EL1 to automatic generation arm64/sysreg: Convert MVFR1_EL1 to automatic generation arm64/sysreg: Convert MVFR0_EL1 to automatic generation arm64/sysreg: Convert ID_PFR2_EL1 to automatic generation arm64/sysreg: Convert ID_PFR1_EL1 to automatic generation arm64/sysreg: Convert ID_PFR0_EL1 to automatic generation ...
2022-12-12Merge tag 'hyperv-next-signed-20221208' of ↵Linus Torvalds8-86/+226
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - Drop unregister syscore from hyperv_cleanup to avoid hang (Gaurav Kohli) - Clean up panic path for Hyper-V framebuffer (Guilherme G. Piccoli) - Allow IRQ remapping to work without x2apic (Nuno Das Neves) - Fix comments (Olaf Hering) - Expand hv_vp_assist_page definition (Saurabh Sengar) - Improvement to page reporting (Shradha Gupta) - Make sure TSC clocksource works when Linux runs as the root partition (Stanislav Kinsburskiy) * tag 'hyperv-next-signed-20221208' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Remove unregister syscore call from Hyper-V cleanup iommu/hyper-v: Allow hyperv irq remapping without x2apic clocksource: hyper-v: Add TSC page support for root partition clocksource: hyper-v: Use TSC PFN getter to map vvar page clocksource: hyper-v: Introduce TSC PFN getter clocksource: hyper-v: Introduce a pointer to TSC page x86/hyperv: Expand definition of struct hv_vp_assist_page PCI: hv: update comment in x86 specific hv_arch_irq_unmask hv: fix comment typo in vmbus_channel/low_latency drivers: hv, hyperv_fb: Untangle and refactor Hyper-V panic notifiers video: hyperv_fb: Avoid taking busy spinlock on panic path hv_balloon: Add support for configurable order free page reporting mm/page_reporting: Add checks for page_reporting_order param
2022-12-12Merge tag 'tpmdd-next-v6.2-rc1' of ↵Linus Torvalds12-318/+106
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull tpm updates from Jarkko Sakkinen: "A random collection of TPM fixes and one bug fix for trusted keys" * tag 'tpmdd-next-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: tpm: st33zp24: remove pointless checks on probe tpm/tpm_crb: Fix error message in __crb_relinquish_locality() tpm/tpm_ftpm_tee: Fix error handling in ftpm_mod_init() tpm: tpm_tis: Add the missed acpi_put_table() to fix memory leak tpm: tpm_crb: Add the missed acpi_put_table() to fix memory leak tpm: acpi: Call acpi_put_table() to fix memory leak tpm: Add flag to use default cancellation policy tpm: tis_i2c: Fix sanity check interrupt enable mask KEYS: trusted: tee: Make registered shm dependency explicit tpm: Avoid function type cast of put_device() tpm: st33zp24: switch to using gpiod API tpm: st33zp24: drop support for platform data
2022-12-12Merge tag 'printk-for-6.2' of ↵Linus Torvalds14-49/+110
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Add NMI-safe SRCU reader API. It uses atomic_inc() instead of this_cpu_inc() on strong load-store architectures. - Introduce new console_list_lock to synchronize a manipulation of the list of registered consoles and their flags. This is a first step in removing the big-kernel-lock-like behavior of console_lock(). This semaphore still serializes console->write() calbacks against: - each other. It primary prevents potential races between early and proper console drivers using the same device. - suspend()/resume() callbacks and init() operations in some drivers. - various other operations in the tty/vt and framebufer susbsystems. It is likely that console_lock() serializes even operations that are not directly conflicting with the console->write() callbacks here. This is the most complicated big-kernel-lock aspect of the console_lock() that will be hard to untangle. - Introduce new console_srcu lock that is used to safely iterate and access the registered console drivers under SRCU read lock. This is a prerequisite for introducing atomic console drivers and console kthreads. It will reduce the complexity of serialization against normal consoles and console_lock(). Also it should remove the risk of deadlock during critical situations, like Oops or panic, when only atomic consoles are registered. - Check whether the console is registered instead of enabled on many locations. It was a historical leftover. - Cleanly force a preferred console in xenfb code instead of a dirty hack. - A lot of code and comment clean ups and improvements. * tag 'printk-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (47 commits) printk: htmldocs: add missing description tty: serial: sh-sci: use setup() callback for early console printk: relieve console_lock of list synchronization duties tty: serial: kgdboc: use console_list_lock to trap exit tty: serial: kgdboc: synchronize tty_find_polling_driver() and register_console() tty: serial: kgdboc: use console_list_lock for list traversal tty: serial: kgdboc: use srcu console list iterator proc: consoles: use console_list_lock for list iteration tty: tty_io: use console_list_lock for list synchronization printk, xen: fbfront: create/use safe function for forcing preferred netconsole: avoid CON_ENABLED misuse to track registration usb: early: xhci-dbc: use console_is_registered() tty: serial: xilinx_uartps: use console_is_registered() tty: serial: samsung_tty: use console_is_registered() tty: serial: pic32_uart: use console_is_registered() tty: serial: earlycon: use console_is_registered() tty: hvc: use console_is_registered() efi: earlycon: use console_is_registered() tty: nfcon: use console_is_registered() serial_core: replace uart_console_enabled() with uart_console_registered() ...
2022-12-12Merge tag 'pstore-v6.2-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull pstore updates from Kees Cook: "A small collection of bug fixes, refactorings, and general improvements: - Reporting improvements and return path fixes (Guilherme G. Piccoli, Wang Yufen, Kees Cook) - Clean up kmsg_bytes module parameter usage (Guilherme G. Piccoli) - Add Guilherme to pstore MAINTAINERS entry - Choose friendlier allocation flags (Qiujun Huang, Stephen Boyd)" * tag 'pstore-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore: Avoid kcore oops by vmap()ing with VM_IOREMAP pstore/ram: Fix error return code in ramoops_probe() pstore: Alert on backend write error MAINTAINERS: Update pstore maintainers pstore/ram: Set freed addresses to NULL pstore/ram: Move internal definitions out of kernel-wide include pstore/ram: Move pmsg init earlier pstore/ram: Consolidate kfree() paths efi: pstore: Follow convention for the efi-pstore backend name pstore: Inform unregistered backend names as well pstore: Expose kmsg_bytes as a module parameter pstore: Improve error reporting in case of backend overlap pstore/zone: Use GFP_ATOMIC to allocate zone buffer
2022-12-12Merge tag 'unsigned-char-6.2-for-linus' of ↵Linus Torvalds3-6/+5
git://git.kernel.org/pub/scm/linux/kernel/git/zx2c4/linux Pull unsigned-char conversion from Jason Donenfeld: "Enable -funsigned-char and fix code affected by that flag. During the 6.1 cycle, several patches already made it into the tree, which were for code that was already broken on at least one architecture, where the naked char had a different sign than the code author anticipated, or were part of some bug fix for an existing bug that this initiative unearthed. These 6.1-era fixes are: 648060902aa3 ("MIPS: pic32: treat port as signed integer") 5c26159c97b3 ("ipvs: use explicitly signed chars") e6cb8769452e ("wifi: airo: do not assign -1 to unsigned char") 937ec9f7d5f2 ("staging: rtl8192e: remove bogus ssid character sign test") 677047383296 ("misc: sgi-gru: use explicitly signed char") 50895a55bcfd ("ALSA: rme9652: use explicitly signed char") ee03c0f200eb ("ALSA: au88x0: use explicitly signed char") 835bed1b8395 ("fbdev: sisfb: use explicitly signed char") 50f19697dd76 ("parisc: Use signed char for hardware path in pdc.h") 66063033f77e ("wifi: rt2x00: use explicitly signed or unsigned types") Regarding patches in this pull: - There is one patch in this pull that should have made it to you during 6.1 ("media: stv0288: use explicitly signed char"), but the maintainer was MIA during the cycle, so it's in here instead. - Two patches fix single architecture code affected by unsigned char ("perf/x86: Make struct p4_event_bind::cntr signed array" and "sparc: sbus: treat CPU index as integer"), while one patch fixes an unused typedef, in case it's ever used in the future ("media: atomisp: make hive_int8 explictly signed"). - Finally, there's the change to actually enable -funsigned-char ("kbuild: treat char as always unsigned") and then the removal of some no longer useful !__CHAR_UNSIGNED__ selftest code ("lib: assume char is unsigned"). The various fixes were found with a combination of diffing objdump output, a large variety of Coccinelle scripts, and plain old grep. In the end, things didn't seem as bad as I feared they would. But of course, it's also possible I missed things. However, this has been in linux-next for basically an entire cycle now, so I'm not overly worried. I've also been daily driving this on my laptop for all of 6.1. Still, this series, and the ones sent for 6.1 don't total in quantity to what I thought it'd be, so I will be on the lookout for breakage. We could receive a few reports that are quickly fixable. Hopefully we won't receive a barrage of reports that would result in a revert. And just maybe we won't receive any reports at all and nobody will even notice. Knock on wood" * tag 'unsigned-char-6.2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/zx2c4/linux: lib: assume char is unsigned kbuild: treat char as always unsigned media: atomisp: make hive_int8 explictly signed media: stv0288: use explicitly signed char sparc: sbus: treat CPU index as integer perf/x86: Make struct p4_event_bind::cntr signed array
2022-12-12Merge branch 'thermal-intel'Rafael J. Wysocki1-1/+1
Merge one more Intel thermal control change for 6.2-rc1: - Remove a pointless die_id chec from the Intel HFI thermal control driver (Ricardo Neri). * thermal-intel: thermal: intel: hfi: Remove a pointless die_id check
2022-12-12Merge tag 'rcu.2022.12.02a' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU updates from Paul McKenney: - Documentation updates. This is the second in a series from an ongoing review of the RCU documentation. - Miscellaneous fixes. - Introduce a default-off Kconfig option that depends on RCU_NOCB_CPU that, on CPUs mentioned in the nohz_full or rcu_nocbs boot-argument CPU lists, causes call_rcu() to introduce delays. These delays result in significant power savings on nearly idle Android and ChromeOS systems. These savings range from a few percent to more than ten percent. This series also includes several commits that change call_rcu() to a new call_rcu_hurry() function that avoids these delays in a few cases, for example, where timely wakeups are required. Several of these are outside of RCU and thus have acks and reviews from the relevant maintainers. - Create an srcu_read_lock_nmisafe() and an srcu_read_unlock_nmisafe() for architectures that support NMIs, but which do not provide NMI-safe this_cpu_inc(). These NMI-safe SRCU functions are required by the upcoming lockless printk() work by John Ogness et al. - Changes providing minor but important increases in torture test coverage for the new RCU polled-grace-period APIs. - Changes to torturescript that avoid redundant kernel builds, thus providing about a 30% speedup for the torture.sh acceptance test. * tag 'rcu.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (49 commits) net: devinet: Reduce refcount before grace period net: Use call_rcu_hurry() for dst_release() workqueue: Make queue_rcu_work() use call_rcu_hurry() percpu-refcount: Use call_rcu_hurry() for atomic switch scsi/scsi_error: Use call_rcu_hurry() instead of call_rcu() rcu/rcutorture: Use call_rcu_hurry() where needed rcu/rcuscale: Use call_rcu_hurry() for async reader test rcu/sync: Use call_rcu_hurry() instead of call_rcu rcuscale: Add laziness and kfree tests rcu: Shrinker for lazy rcu rcu: Refactor code a bit in rcu_nocb_do_flush_bypass() rcu: Make call_rcu() lazy to save power rcu: Implement lockdep_rcu_enabled for !CONFIG_DEBUG_LOCK_ALLOC srcu: Debug NMI safety even on archs that don't require it srcu: Explain the reason behind the read side critical section on GP start srcu: Warn when NMI-unsafe API is used in NMI arch/s390: Add ARCH_HAS_NMI_SAFE_THIS_CPU_OPS Kconfig option arch/loongarch: Add ARCH_HAS_NMI_SAFE_THIS_CPU_OPS Kconfig option rcu: Fix __this_cpu_read() lockdep warning in rcu_force_quiescent_state() rcu-tasks: Make grace-period-age message human-readable ...
2022-12-12Merge branches 'pm-devfreq' and 'pm-tools'Rafael J. Wysocki4-14/+11
Merge devfreq updates and cpupower utility updates for 6.2-rc1: - Add a private governor_data for devfreq governors (Kant Fan). - Reorganize devfreq code to use device_match_of_node() and devm_platform_get_and_ioremap_resource() instead of open coding them (ye xingchen, Minghao Chi). - Make cpupower choose base_cpu to display default cpupower details instead of picking CPU 0 (Saket Kumar Bhaskar). - Add Georgian translation to cpupower documentation (Zurab Kargareteli). - Introduce powercap intel-rapl library, powercap-info command, and RAPL monitor into cpupower (Thomas Renninger). * pm-devfreq: PM / devfreq: event: use devm_platform_get_and_ioremap_resource() PM / devfreq: event: Use device_match_of_node() PM / devfreq: Use device_match_of_node() PM/devfreq: governor: Add a private governor_data for governor * pm-tools: cpupower: rapl monitor - shows the used power consumption in uj for each rapl domain cpupower: Introduce powercap intel-rapl library and powercap-info command cpupower: Add Georgian translation tools/cpupower: Choose base_cpu to display default cpupower details
2022-12-12Merge branches 'powercap', 'pm-x86', 'pm-opp' and 'pm-misc'Rafael J. Wysocki7-130/+628
Merge power capping code updates, x86-specific power management pdate, operating performance points library updates and miscellaneous power management updates for 6.2-rc1: - Fix compiler warnings with make W=1 in the idle_inject power capping driver (Srinivas Pandruvada). - Use kstrtobool() instead of strtobool() in the power capping sysfs interface (Christophe JAILLET). - Add SCMI Powercap based power capping driver (Cristian Marussi). - Add Emerald Rapids support to the intel-uncore-freq driver (Artem Bityutskiy). - Repair slips in kernel-doc comments in the generic notifier code (Lukas Bulwahn). - Fix several DT issues in the OPP library reorganize code around opp-microvolt-<named> DT property (Viresh Kumar). - Allow any of opp-microvolt, opp-microamp, or opp-microwatt properties to be present without the others present (James Calligeros). - Fix clock-latency-ns property in DT example (Serge Semin). * powercap: powercap: idle_inject: Fix warnings with make W=1 powercap: Use kstrtobool() instead of strtobool() powercap: arm_scmi: Add SCMI Powercap based driver * pm-x86: platform/x86: intel-uncore-freq: add Emerald Rapids support * pm-opp: dt-bindings: opp-v2: Fix clock-latency-ns prop in example OPP: decouple dt properties in opp_parse_supplies() OPP: Simplify opp_parse_supplies() by restructuring it OPP: Parse named opp-microwatt property too dt-bindings: opp: Fix named microwatt property dt-bindings: opp: Fix usage of current in microwatt property * pm-misc: notifier: repair slips in kernel-doc comments
2022-12-12Merge branches 'pm-cpuidle', 'pm-sleep' and 'pm-domains'Rafael J. Wysocki3-101/+63
Merge cpuidle changes, updates related to system sleep amd generic power domains code fixes for 6.2-rc1: - Improve kernel messages printed by the cpuidle PCI driver (Ulf Hansson). - Make the DT cpuidle driver return the correct number of parsed idle states, clean it up and clarify a comment in it (Ulf Hansson). - Modify the tasks freezing code to avoid using pr_cont() and refine an error message printed by it (Rafael Wysocki). - Make the hibernation core code complain about memory map mismatches during resume to help diagnostics (Xueqin Luo). - Fix mistake in a kerneldoc comment in the hibernation code (xiongxin). - Reverse the order of performance and enabling operations in the generic power domains code (Abel Vesa). - Power off[on] domains in hibernate .freeze[thaw]_noirq hook of in the generic power domains code (Abel Vesa). - Consolidate genpd_restore_noirq() and genpd_resume_noirq() (Shawn Guo). - Pass generic PM noirq hooks to genpd_finish_suspend() (Shawn Guo). - Drop generic power domain status manipulation during hibernate restore (Shawn Guo). * pm-cpuidle: cpuidle: dt: Clarify a comment and simplify code in dt_init_idle_driver() cpuidle: dt: Return the correct numbers of parsed idle states cpuidle: psci: Extend information in log about OSI/PC mode * pm-sleep: PM: sleep: Refine error message in try_to_freeze_tasks() PM: sleep: Avoid using pr_cont() in the tasks freezing code PM: hibernate: Complain about memory map mismatches during resume PM: hibernate: Fix mistake in kerneldoc comment * pm-domains: PM: domains: Reverse the order of performance and enabling ops PM: domains: Power off[on] domain in hibernate .freeze[thaw]_noirq hook PM: domains: Consolidate genpd_restore_noirq() and genpd_resume_noirq() PM: domains: Pass generic PM noirq hooks to genpd_finish_suspend() PM: domains: Drop genpd status manipulation for hibernate restore
2022-12-12Merge branch 'pm-cpufreq'Rafael J. Wysocki15-146/+569
Merge cpufreq changes for 6.2-rc1: - Generalize of_perf_domain_get_sharing_cpumask phandle format (Hector Martin). - Add new cpufreq driver for Apple SoC CPU P-states (Hector Martin). - Update Qualcomm cpufreq driver, including: * CPU clock provider support, * Generic cleanups or reorganization. * Potential memleak fix. * Fix of the return value of cpufreq_driver->get(). (Manivannan Sadhasivam, Chen Hui). - Update Qualcomm cpufreq driver's DT bindings, including: * Support for CPU clock provider. * Missing cache-related properties fixes. * Support for QDU1000/QRU1000. (Manivannan Sadhasivam, Rob Herring, Melody Olvera). - Add support for ti,am625 SoC and enable build of ti-cpufreq for ARCH_K3 (Dave Gerlach, and Vibhore Vardhan). - Use flexible array to simplify memory allocation in the tegra186 cpufreq driver (Christophe JAILLET). - Convert cpufreq statistics code to use sysfs_emit_at() (ye xingchen). - Allow intel_pstate to use no-HWP mode on Sapphire Rapids (Giovanni Gherdovich). - Add missing pci_dev_put() to the amd_freq_sensitivity cpufreq driver (Xiongfeng Wang). - Initialize the kobj_unregister completion before calling kobject_init_and_add() in the cpufreq core code (Yongqiang Liu). - Defer setting boost MSRs in the ACPI cpufreq driver (Stuart Hayes, Nathan Chancellor). - Make intel_pstate accept initial EPP value of 0x80 (Srinivas Pandruvada). - Make read-only array sys_clk_src in the SPEAr cpufreq driver static (Colin Ian King). - Make array speeds in the longhaul cpufreq driver static (Colin Ian King). - Use str_enabled_disabled() helper in the ACPI cpufreq driver (Andy Shevchenko). - Drop a reference to CVS from cpufreq documentation (Conghui Wang). * pm-cpufreq: (30 commits) cpufreq: Remove CVS version control contents from documentation cpufreq: stats: Convert to use sysfs_emit_at() API cpufreq: ACPI: Only set boost MSRs on supported CPUs dt-bindings: cpufreq: cpufreq-qcom-hw: Add QDU1000/QRU1000 cpufreq cpufreq: tegra186: Use flexible array to simplify memory allocation cpufreq: intel_pstate: Add Sapphire Rapids support in no-HWP mode cpufreq: amd_freq_sensitivity: Add missing pci_dev_put() cpufreq: Init completion before kobject_init_and_add() cpufreq: apple-soc: Add new driver to control Apple SoC CPU P-states cpufreq: qcom-hw: Add CPU clock provider support dt-bindings: cpufreq: cpufreq-qcom-hw: Add cpufreq clock provider cpufreq: qcom-hw: Fix the frequency returned by cpufreq_driver->get() cpufreq: ACPI: Remove unused variables 'acpi_cpufreq_online' and 'ret' cpufreq: qcom-hw: Fix memory leak in qcom_cpufreq_hw_read_lut() arm64: dts: ti: k3-am625-sk: Add 1.4GHz OPP cpufreq: ti: Enable ti-cpufreq for ARCH_K3 arm64: dts: ti: k3-am625: Introduce operating-points table cpufreq: dt-platdev: Blacklist ti,am625 SoC cpufreq: ti-cpufreq: Add support for AM625 dt-bindings: cpufreq: qcom: Add missing cache related properties ...
2022-12-12Merge branches 'edac-ghes' and 'edac-misc' into edac-updates-for-v6.2Borislav Petkov (AMD)4-3/+28
Combine all queued EDAC changes for submission into v6.2: * ras/edac-ghes: EDAC/igen6: Return the correct error type when not the MC owner apei/ghes: Use xchg_release() for updating new cache slot instead of cmpxchg() EDAC: Check for GHES preference in the chipset-specific EDAC drivers EDAC/ghes: Make ghes_edac a proper module EDAC/ghes: Prepare to make ghes_edac a proper module EDAC/ghes: Add a notifier for reporting memory errors efi/cper: Export several helpers for ghes_edac to use * ras/edac-misc: EDAC/i10nm: fix refcount leak in pci_get_dev_wrapper() EDAC/i5400: Fix typo in comment: vaious -> various EDAC/mc_sysfs: Increase legacy channel support to 12 MAINTAINERS: Make Mauro EDAC reviewer MAINTAINERS: Make Manivannan Sadhasivam the maintainer of qcom_edac EDAC/i5000: Mark as BROKEN Signed-off-by: Borislav Petkov (AMD) <[email protected]>
2022-12-12Merge branches 'acpi-fan', 'acpi-pcc', 'acpi-misc' and 'pnp'Rafael J. Wysocki9-35/+50
Merge ACPI fan driver fixes, ACPI PCC driver fixes, miscellaneous ACPI cleanups and PNP updates for 6.2-rc1: - Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface code (ye xingchen). - Fix the _FIF package extraction failure handling in the ACPI fan driver (Hanjun Guo). - Fix the PCC mailbox handling error code path (Huisong Li). - Avoid using PCC Opregions if there is no platform interrupt allocated for this purpose (Huisong Li). - Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and CPPC library (ye xingchen). - Fix some kernel-doc issues in the ACPI GSI processing code (Xiongfeng Wang). - Fix name memory leak in pnp_alloc_dev() (Yang Yingliang). - Do not disable PNP devices on suspend when they cannot be re-enabled on resume (Hans de Goede). * acpi-fan: ACPI: fan: Convert to use sysfs_emit_at() API ACPI: fan: Bail out if extract package failed * acpi-pcc: mailbox: pcc: Reset pcc_chan_count to zero in case of PCC probe failure ACPI: PCC: Setup PCC Opregion handler only if platform interrupt is available * acpi-misc: ACPI: use sysfs_emit() instead of scnprintf() ACPI: irq: Fix some kernel-doc issues * pnp: PNP: Do not disable devices on suspend when they cannot be re-enabled on resume PNP: fix name memory leak in pnp_alloc_dev()
2022-12-12Merge branches 'acpi-apei', 'acpi-x86', 'acpi-battery' and 'acpi-pfrut'Rafael J. Wysocki7-69/+92
Make ACPI APEI updates, x86-specific ACPI updates, ACPI battery driver fix and ACPI PFRU/T driver fixes for 6.2-rc1: - Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König). - Use xchg_release() instead of cmpxchg() for updating new GHES cache slots (Ard Biesheuvel). - Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay Lu). - Add new I2C device enumeration quirks for Medion Lifetab S10346 and Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede). - Make the ACPI battery driver notify user space about adding new battery hooks and removing the existing ones (Armin Wolf). - Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE() for freeing acpi_object structures to help diagnostics (Wang ShaoBo). * acpi-apei: ACPI: APEI: EINJ: Refactor available_error_type_show() ACPI: APEI: EINJ: Fix formatting errors ACPI: APEI: Remove a useless include ACPI: APEI: Silence missing prototype warnings apei/ghes: Use xchg_release() for updating new cache slot instead of cmpxchg() ACPI: APEI: Drop unsetting driver data on remove * acpi-x86: ACPI: x86: Add skip i2c clients quirk for Medion Lifetab S10346 ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Tab 3 Pro (YT3-X90F) * acpi-battery: ACPI: battery: Call power_supply_changed() when adding hooks * acpi-pfrut: ACPI: pfr_update: use ACPI_FREE() to free acpi_object ACPI: pfr_telemetry: use ACPI_FREE() to free acpi_object
2022-12-12Merge branches 'acpi-pm', 'acpi-processor', 'acpi-ec' and 'acpi-video'Rafael J. Wysocki6-111/+124
Make ACPI power management changes, ACPI processor driver updates, ACPI EC driver quirk and ACPI backlight driver updates for 6.2-rc1: - Print full name paths of ACPI power resources objects during enumeration (Kane Chen). - Eliminate a compiler warning regarding a missing function prototype in the ACPI power management code (Sudeep Holla). - Fix and clean up the ACPI processor driver (Rafael Wysocki, Li Zhong, Colin Ian King, Sudeep Holla). - Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC driver (Mia Kanashi). - Add some mew ACPI backlight handling quirks and update some existing ones (Hans de Goede). - Make the ACPI backlight driver prefer the native backlight control over vendor backlight control when possible (Hans de Goede). * acpi-pm: ACPI: PM: Silence missing prototype warning ACPI: PM: Print full name path while adding power resource * acpi-processor: ACPI: processor: perflib: Adjust acpi_processor_notify_smm() return value ACPI: processor: perflib: Rearrange acpi_processor_notify_smm() ACPI: processor: perflib: Rearrange unregistration routine ACPI: processor: perflib: Drop redundant parentheses ACPI: processor: perflib: Adjust white space ACPI: processor: idle: Drop unnecessary statements and parens ACPI: processor: Silence missing prototype warnings ACPI: processor_idle: Silence missing prototype warnings ACPI: processor: throttling: remove variable count ACPI: processor: idle: Check acpi_fetch_acpi_dev() return value * acpi-ec: ACPI: EC: Add quirk for the HP Pavilion Gaming 15-cx0041ur * acpi-video: ACPI: video: Prefer native over vendor ACPI: video: Simplify __acpi_video_get_backlight_type() ACPI: video: Add force_native quirk for Sony Vaio VPCY11S1E ACPI: video: Add force_vendor quirk for Sony Vaio PCG-FRV35 ACPI: video: Change Sony Vaio VPCEH3U1E quirk to force_native ACPI: video: Change GIGABYTE GB-BXBT-2807 quirk to force_none ACPI: video: Add a few bugtracker links to DMI quirks
2022-12-12Merge branches 'acpi-scan', 'acpi-bus', 'acpi-tables' and 'acpi-sysfs'Rafael J. Wysocki52-151/+170
Merge ACPI changes related to device enumeration, device object managenet, operation region handling, table parsing and sysfs interface: - Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device enumeration code (Giulio Benetti). - Change the return type of the ACPI driver remove callback to void and update its users accordingly (Dawei Li). - Add general support for FFH address space type and implement the low- level part of it for ARM64 (Sudeep Holla). - Fix stale comments in the ACPI tables parsing code and make it print more messages related to MADT (Hanjun Guo, Huacai Chen). - Replace invocations of generic library functions with more kernel- specific counterparts in the ACPI sysfs interface (Christophe JAILLET, Xu Panda). * acpi-scan: ACPI: scan: substitute empty_zero_page with helper ZERO_PAGE(0) * acpi-bus: ACPI: FFH: Silence missing prototype warnings ACPI: make remove callback of ACPI driver void ACPI: bus: Fix the _OSC capability check for FFH OpRegion arm64: Add architecture specific ACPI FFH Opregion callbacks ACPI: Implement a generic FFH Opregion handler * acpi-tables: ACPI: tables: Fix the stale comments for acpi_locate_initial_tables() ACPI: tables: Print CORE_PIC information when MADT is parsed * acpi-sysfs: ACPI: sysfs: use sysfs_emit() to instead of scnprintf() ACPI: sysfs: Use kstrtobool() instead of strtobool()
2022-12-12Merge branch 'acpica'Rafael J. Wysocki20-111/+277
Merge ACPICA changes, including bug fixes and cleanups as well as support for some recently defined data structures, for 6.2-rc1: - Make acpi_ex_load_op() match upstream implementation (Rafael Wysocki). - Add support for loong_arch-specific APICs in MADT (Huacai Chen). - Add support for fixed PCIe wake event (Huacai Chen). - Add EBDA pointer sanity checks (Vit Kabele). - Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele). - Add CCEL table support to both compiler/disassembler (Kuppuswamy Sathyanarayanan). - Add a couple of new UUIDs to the known UUID list (Bob Moore). - Add support for FFH Opregion special context data (Sudeep Holla). - Improve warning message for "invalid ACPI name" (Bob Moore). - Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT table (Alison Schofield). - Prepare IORT support for revision E.e (Robin Murphy). - Finish support for the CDAT table (Bob Moore). - Fix error code path in acpi_ds_call_control_method() (Rafael Wysocki). - Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li Zetao). - Update the version of the ACPICA code in the kernel (Bob Moore). * acpica: ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() ACPICA: Fix error code path in acpi_ds_call_control_method() ACPICA: Update version to 20221020 ACPICA: Add utcksum.o to the acpidump Makefile Revert "LoongArch: Provisionally add ACPICA data structures" ACPICA: Finish support for the CDAT table ACPICA: IORT: Update for revision E.e ACPICA: Add CXL 3.0 structures (CXIMS & RDPAS) to the CEDT table ACPICA: Improve warning message for "invalid ACPI name" ACPICA: Add support for FFH Opregion special context data ACPICA: Add a couple of new UUIDs to the known UUID list ACPICA: iASL: Add CCEL table to both compiler/disassembler ACPICA: Do not touch VGA memory when EBDA < 1ki_b ACPICA: Check that EBDA pointer is in valid memory ACPICA: Events: Support fixed PCIe wake event ACPICA: MADT: Add loong_arch-specific APICs support ACPICA: Make acpi_ex_load_op() match upstream
2022-12-12Merge tag 'linux-can-next-for-6.2-20221212' of ↵David S. Miller22-221/+575
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== linux-can-next-for-6.2-20221212 this is a pull request of 39 patches for net-next/master. The first 2 patches are by me fix a warning and coding style in the kvaser_usb driver. Vivek Yadav's patch sorts the includes of the m_can driver. Biju Das contributes 5 patches for the rcar_canfd driver improve the support for different IP core variants. Jean Delvare's patch for the ctucanfd drops the dependency on COMPILE_TEST. Vincent Mailhol's patch sorts the includes of the etas_es58x driver. Haibo Chen's contributes 2 patches that add i.MX93 support to the flexcan driver. Lad Prabhakar's patch updates the dt-bindings documentation of the rcar_canfd driver. Minghao Chi's patch converts the c_can platform driver to devm_platform_get_and_ioremap_resource(). In the next 7 patches Vincent Mailhol adds devlink support to the etas_es58x driver to report firmware, bootloader and hardware version. Xu Panda's patch converts a strncpy() -> strscpy() in the ucan driver. Ye Bin's patch removes a useless parameter from the AF_CAN protocol. The next 2 patches by Vincent Mailhol and remove unneeded or unused pointers to struct usb_interface in device's priv struct in the ucan and gs_usb driver. Vivek Yadav's patch cleans up the usage of the RAM initialization in the m_can driver. A patch by me add support for SO_MARK to the AF_CAN protocol. Geert Uytterhoeven's patch fixes the number of CAN channels in the rcan_canfd bindings documentation. In the last 11 patches Markus Schneider-Pargmann optimizes the register access in the t_can driver and cleans up the tcan glue driver. ==================== Signed-off-by: David S. Miller <[email protected]>
2022-12-12regmap: Merge fix for where we get the number of registers fromMark Brown1-4/+11
This didn't get sent for 6.1 since we should do a better fix but that didn't happen in time.
2022-12-12can: tcan4x5x: Specify separate read/write rangesMarkus Schneider-Pargmann1-6/+37
Specify exactly which registers are read/writeable in the chip. This is supposed to help detect any violations in the future. Signed-off-by: Markus Schneider-Pargmann <[email protected]> Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-12-12can: tcan4x5x: Fix register range of first two blocksMarkus Schneider-Pargmann1-2/+2
According to the datasheet 0x10 is the last register in the first block, not register 0x2c. The datasheet lists the last register of the second block as 0x830, not 0x83c. Signed-off-by: Markus Schneider-Pargmann <[email protected]> Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-12-12can: tcan4x5x: Fix use of register error status maskMarkus Schneider-Pargmann1-7/+7
TCAN4X5X_ERROR_STATUS is not a status register that needs clearing during interrupt handling. Instead this is a masking register that masks error interrupts. Writing TCAN4X5X_CLEAR_ALL_INT to this register effectively masks everything. Rename the register and mask all error interrupts only once by writing to the register in tcan4x5x_init. Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel") Signed-off-by: Markus Schneider-Pargmann <[email protected]> Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-12-12can: tcan4x5x: Remove invalid write in clear_interruptsMarkus Schneider-Pargmann1-5/+0
Register 0x824 TCAN4X5X_MCAN_INT_REG is a read-only register. Any writes to this register do not have any effect. Remove this write. The m_can driver aldready clears the interrupts in m_can_isr() by writing to M_CAN_IR which is translated to register 0x1050 which is a writable version of this register. Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel") Signed-off-by: Markus Schneider-Pargmann <[email protected]> Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-12-12can: m_can: Batch acknowledge rx fifoMarkus Schneider-Pargmann1-5/+10
Instead of acknowledging every item of the fifo, only acknowledge the last item read. This behavior is documented in the datasheet. The new getindex will be the acknowledged item + 1. Signed-off-by: Markus Schneider-Pargmann <[email protected]> Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-12-12can: m_can: Batch acknowledge transmit eventsMarkus Schneider-Pargmann1-6/+9
Transmit events from the txe fifo can be batch acknowledged by acknowledging the last read txe fifo item. This will save txe_count writes which is important for peripheral chips. Signed-off-by: Markus Schneider-Pargmann <[email protected]> Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-12-12can: m_can: Count read getindex in the driverMarkus Schneider-Pargmann1-7/+10
The getindex gets increased by one every time. We can calculate the correct getindex in the driver and avoid the additional reads of rxfs. Signed-off-by: Markus Schneider-Pargmann <[email protected]> Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-12-12can: m_can: Count TXE FIFO getidx in the driverMarkus Schneider-Pargmann1-3/+2
The getindex simply increases by one for every iteration. There is no need to get the current getidx every time from a register. Instead we can just count and wrap if necessary. Signed-off-by: Markus Schneider-Pargmann <[email protected]> Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-12-12can: m_can: Read register PSR only on errorMarkus Schneider-Pargmann1-5/+4
Only read register PSR if there is an error indicated in irqstatus. Signed-off-by: Markus Schneider-Pargmann <[email protected]> Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-12-12can: m_can: Avoid reading irqstatus twiceMarkus Schneider-Pargmann1-7/+9
For peripheral devices the m_can_rx_handler is called directly after setting cdev->irqstatus. This means we don't have to read the irqstatus again in m_can_rx_handler. Avoid this by adding a parameter that is false for direct calls. Signed-off-by: Markus Schneider-Pargmann <[email protected]> Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-12-12can: m_can: Eliminate double read of TXFQS in tx_handlerMarkus Schneider-Pargmann1-4/+11
The TXFQS register is read first to check if the fifo is full and then immediately again to get the putidx. This is unnecessary and adds significant overhead if read requests are done over a slow bus, for example SPI with tcan4x5x. Add a variable to store the value of the register. Split the m_can_tx_fifo_full function into two to avoid the hidden m_can_read call if not needed. Signed-off-by: Markus Schneider-Pargmann <[email protected]> Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-12-12can: m_can: Call the RAM init directly from m_can_chip_configVivek Yadav3-15/+26
When we try to access the mcan message ram addresses during the probe, hclk is gated by any other drivers or disabled, because of that probe gets failed. Move the mram init functionality to mcan chip config called by m_can_start from mcan open function, by that time clocks are enabled. Suggested-by: Marc Kleine-Budde <[email protected]> Signed-off-by: Vivek Yadav <[email protected]> Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-12-12can: gs_usb: remove gs_can::ifaceVincent Mailhol1-20/+9
The iface field of struct gs_can is only used to retrieve the usb_device which is already available in gs_can::udev. Replace each occurrence of interface_to_usbdev(dev->iface) with dev->udev. This done, remove gs_can::iface. Signed-off-by: Vincent Mailhol <[email protected]> Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-12-12can: ucan: remove unused ucan_priv::intfVincent Mailhol1-2/+0
Field intf of struct ucan_priv is set but never used. Remove it. Signed-off-by: Vincent Mailhol <[email protected]> Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-12-12can: ucan: use strscpy() to instead of strncpy()Xu Panda1-3/+2
The implementation of strscpy() is more robust and safer. That's now the recommended way to copy NUL terminated strings. Signed-off-by: Xu Panda <[email protected]> Signed-off-by: Yang Yang <[email protected]> Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-12-12can: etas_es58x: remove es58x_get_product_info()Vincent Mailhol1-49/+3
Now that the product information are available under devlink, no more need to print them in the kernel log. Remove es58x_get_product_info(). Signed-off-by: Vincent Mailhol <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.