aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2008-11-06cciss: new hardware supportMike Miller1-0/+4
Add support for 2 new SAS/SATA controllers. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-06iwl3945: fix deadlock on suspendZhu, Yi1-1/+1
This patch fixes iwl3945 deadlock during suspend by moving notify_mac out of iwl3945 mutex. This is a portion of the same fix for iwlwifi by Tomas. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-06iwl3945: do not send scan command if channel count zeroReinette Chatre1-0/+5
Do not send scan command if no channels to scan. This avoids a Microcode error as reported in: http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1650 http://bugzilla.kernel.org/show_bug.cgi?id=11806 http://marc.info/?l=linux-wireless&m=122437145211886&w=2 Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-06iwl3945: clear scanning bits upon failureMohamed Abbas1-0/+8
This patch ensures we clear any scan status bit when an error occurs while sending the scan command. It is the implementation of patch: "iwlwifi: clear scanning bits upon failure" for iwl3945. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-06ath5k: correct handling of rx status fieldsBob Copeland1-8/+8
ath5k_rx_status fields rs_antenna and rs_more are u8s, but we were setting them with bitwise ANDs of 32-bit values. As a consequence, jumbo frames would not be discarded as intended. Then, because the hw rate value of such frames is zero, and, since "ath5k: rates cleanup", we do not fall back to the basic rate, such packets would trigger the following WARN_ON: ------------[ cut here ]------------ WARNING: at net/mac80211/rx.c:2192 __ieee80211_rx+0x4d/0x57e [mac80211]() Modules linked in: ath5k af_packet sha256_generic aes_i586 aes_generic cbc loop i915 drm binfmt_misc acpi_cpufreq fan container nls_utf8 hfsplus dm_crypt dm_mod kvm_intel kvm fuse sbp2 snd_hda_intel snd_pcm_oss snd_pcm snd_mixer_oss snd_seq_dummy snd_seq_oss arc4 joydev hid_apple ecb snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device usbhid appletouch mac80211 sky2 snd ehci_hcd ohci1394 bitrev crc32 sr_mod cdrom rtc sg uhci_hcd snd_page_alloc cfg80211 ieee1394 thermal ac battery processor button evdev unix [last unloaded: ath5k] Pid: 0, comm: swapper Tainted: G W 2.6.28-rc2-wl #14 Call Trace: [<c0123d1e>] warn_on_slowpath+0x41/0x5b [<c012005d>] ? sched_debug_show+0x31e/0x9c6 [<c012489f>] ? vprintk+0x369/0x389 [<c0309539>] ? _spin_unlock_irqrestore+0x54/0x58 [<c011cd8f>] ? try_to_wake_up+0x14f/0x15a [<f81918cb>] __ieee80211_rx+0x4d/0x57e [mac80211] [<f828872a>] ath5k_tasklet_rx+0x5a1/0x5e4 [ath5k] [<c013b9cd>] ? clockevents_program_event+0xd4/0xe3 [<c01283a9>] tasklet_action+0x94/0xfd [<c0127d19>] __do_softirq+0x8c/0x13e [<c0127e04>] do_softirq+0x39/0x55 [<c0128082>] irq_exit+0x46/0x85 [<c010576c>] do_IRQ+0x9a/0xb2 [<c010461c>] common_interrupt+0x28/0x30 [<f80e934a>] ? acpi_idle_enter_bm+0x2ad/0x31b [processor] [<c02976bf>] cpuidle_idle_call+0x65/0x9a [<c010262c>] cpu_idle+0x76/0xa6 [<c02fb402>] rest_init+0x62/0x64 Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-06zd1211rw: Add 2 device IDsDaniel Drake1-0/+2
07fa/1196 Bewan BWIFI-USB54AR: Tested by night1308, this device is a ZD1211B with an AL2230S radio. 0ace/b215 HP 802.11abg: Tested by Robert Philippe Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-06iwlagn: avoid sleep in softirq contextJohn W. Linville1-1/+5
__ieee80211_tasklet_handler -> __ieee80211_rx -> __ieee80211_rx_handle_packet -> ieee80211_invoke_rx_handlers -> ieee80211_rx_h_decrypt -> ieee80211_crypto_tkip_decrypt -> ieee80211_tkip_decrypt_data -> iwl4965_mac_update_tkip_key -> iwl_scan_cancel_timeout -> msleep Ooops! Avoid the sleep by changing iwl_scan_cancel_timeout with iwl_scan_cancel and simply returning on failure if the scan persists. This will cause hardware decryption to fail and we'll handle a few more frames with software decryption. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-06iwlwifi: clear scanning bits upon failureMohamed Abbas1-0/+7
In iwl_bg_request_scan function, if we could not send a scan command it will go to done. In done it does the right thing to call mac80211 with scan complete, but the problem is STATUS_SCAN_HW is still set causing any future scan to fail. Fix by clearing the scanning status bits if scan fails. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-06Revert "ath5k: honor FIF_BCN_PRBRESP_PROMISC in STA mode"John W. Linville1-1/+3
Unfortunately, the result was that mac80211 didn't see all the beacons it actually wanted to see. This caused lost associations. Hopefully we can revisit this when mac80211 is less greedy about seeing beacons directly... This reverts commit 063279062a8c530cc90fb77797db16c49c905b26. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-06[WATCHDOG] SAM9 watchdog - supported on all SAM9 and CAP9 processorsAndrew Victor1-4/+4
The SAM9 watchdog driver is usable on the whole family of AT91SAM9 and CAP9 processors. Update the configuration to indicate this and allow the driver to be selected. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-11-06[WATCHDOG] SAM9 watchdog - update for moved headersAndrew Victor1-1/+1
The architecture header files were recently moved from include/asm-arm/mach-at91/ to arch/arm/mach-at91/include/mach/. The SAM9 watchdog driver still includes a header from the old location. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-11-06md: linear: Fix a division by zero bug for very small arrays.Andre Noll1-0/+2
We currently oops with a divide error on starting a linear software raid array consisting of at least two very small (< 500K) devices. The bug is caused by the calculation of the hash table size which tries to compute sector_div(sz, base) with "base" being zero due to the small size of the component devices of the array. Fix this by requiring the hash spacing to be at least one which implies that also "base" is non-zero. This bug has existed since about 2.6.14. Cc: stable@kernel.org Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2008-11-06md: fix bug in raid10 recovery.NeilBrown1-1/+1
Adding a spare to a raid10 doesn't cause recovery to start. This is due to an silly type in commit 6c2fce2ef6b4821c21b5c42c7207cb9cf8c87eda and so is a bug in 2.6.27 and .28-rc. Thanks to Thomas Backlund for bisecting to find this. Cc: Thomas Backlund <tmb@mandriva.org> Cc: stable@kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2008-11-06md: revert the recent addition of a call to the BLKRRPART ioctl.NeilBrown1-6/+0
It turns out that it is only safe to call blkdev_ioctl when the device is actually open (as ->bd_disk is set to NULL on last close). And it is quite possible for do_md_stop to be called when the device is not open. So discard the call to blkdev_ioctl(BLKRRPART) which was added in commit 934d9c23b4c7e31840a895ba4b7e88d6413c81f3 It is just as easy to call this ioctl from userspace when needed (on mdadm -S) so leave it out of the kernel Signed-off-by: NeilBrown <neilb@suse.de>
2008-11-05[MTD] [NOR] Fix cfi_send_gen_cmd handling of x16 devices in x8 mode (v4)Eric W. Biederman2-19/+4
For "unlock" cycles to 16bit devices in 8bit compatibility mode we need to use the byte addresses 0xaaa and 0x555. These effectively match the word address 0x555 and 0x2aa, except the latter has its low bit set. Most chips don't care about the value of the 'A-1' pin in x8 mode, but some -- like the ST M29W320D -- do. So we need to be careful to set it where appropriate. cfi_send_gen_cmd is only ever passed addresses where the low byte is 0x00, 0x55 or 0xaa. Of those, only addresses ending 0xaa are affected by this patch, by masking in the extra low bit when the device is known to be in compatibility mode. [dwmw2: Do it only when (cmd_ofs & 0xff) == 0xaa] v4: Fix stupid typo in cfi_build_cmd_addr that failed to compile I'm writing this patch way to late at night. v3: Bring all of the work back into cfi_build_cmd_addr including calling of map_bankwidth(map) and cfi_interleave(cfi) So every caller doesn't need to. v2: Only modified the address if we our device_type is larger than our bus width. Cc: stable@kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-11-05powerpc/ps3: Fix compile error in ps3-lpm.cAlexey Dobriyan1-0/+1
Compiling with CONFIG_SMP = n and CONFIG_PS3_LPM != n gives this error: drivers/ps3/ps3-lpm.c:838: error: implicit declaration of function 'get_hard_smp_processor_id' This fixes it. We have to include <asm/smp.h> rather than <linux/smp.h> because the UP definition of get_hard_smp_processor_id() is in <asm/smp.h>, and <linux/smp.h> only includes <asm/smp.h> if CONFIG_SMP = y. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds8-22/+40
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: xfrm: Fix xfrm_policy_gc_lock handling. niu: Use pci_ioremap_bar(). bnx2x: Version Update bnx2x: Calling netif_carrier_off at the end of the probe bnx2x: PCI configuration bug on big-endian bnx2x: Removing the PMF indication when unloading mv643xx_eth: fix SMI bus access timeouts net: kconfig cleanup fs_enet: fix polling XFRM: copy_to_user_kmaddress() reports local address twice SMC91x: Fix compilation on some platforms. udp: Fix the SNMP counter of UDP_MIB_INERRORS udp: Fix the SNMP counter of UDP_MIB_INDATAGRAMS drivers/net/smc911x.c: Fix lockdep warning on xmit.
2008-11-04Merge branch 'upstream-linus' of ↵Linus Torvalds5-34/+56
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: mask off DET when restoring SControl for detach libata: implement ATA_HORKAGE_ATAPI_MOD16_DMA and apply it libata: Fix a potential race condition in ata_scsi_park_show() sata_nv: fix generic, nf2/3 detection regression sata_via: restore vt*_prepare_host error handling sata_promise: add ATA engine reset to reset ops
2008-11-04drivers: remove duplicated #includeJianjun Kong8-8/+0
Signed-off-by: Jianjun Kong <jianjun@zeuux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-04libata: mask off DET when restoring SControl for detachTejun Heo1-1/+1
libata restores SControl on detach; however, trying to restore non-zero DET can cause undeterministic behavior including PMP device going offline till power cycling. Mask off DET when restoring SControl. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-04libata: implement ATA_HORKAGE_ATAPI_MOD16_DMA and apply itTejun Heo1-1/+3
libata always uses PIO for ATAPI commands when the number of bytes to transfer isn't multiple of 16 but quantum DAT72 chokes on odd bytes PIO transfers. Implement a horkage to skip the mod16 check and apply it to the quantum device. This is reported by John Clark in the following thread. http://thread.gmane.org/gmane.linux.ide/34748 Signed-off-by: Tejun Heo <tj@kernel.org> Cc: John Clark <clarkjc@runbox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-04libata: Fix a potential race condition in ata_scsi_park_show()Elias Oltmanns1-3/+4
Peter Moulder has pointed out that there is a slight chance that a negative value might be passed to jiffies_to_msecs() in ata_scsi_park_show(). This is fixed by saving the value of jiffies in a local variable, thus also reducing code since the volatile variable jiffies is accessed only once. Signed-off-by: Elias Oltmanns <eo@nebensachen.de> Signed-off-by: Tejun Heo <tj.kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-04sata_nv: fix generic, nf2/3 detection regressionTejun Heo1-28/+25
All three flavors of sata_nv's are different in how their hardreset behaves. * generic: Hardreset is not reliable. Link often doesn't come online after hardreset. * nf2/3: A little bit better - link comes online with longer debounce timing. However, nf2/3 can't reliable wait for the first D2H Register FIS, so it can't wait for device readiness or classify the device after hardreset. Follow-up SRST required. * ck804: Hardreset finally works. The core layer change to prefer hardreset and follow up changes exposed the above issues and caused various detection regressions for all three flavors. This patch, hopefully, fixes all the known issues and should make sata_nv error handling more reliable. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-04sata_via: restore vt*_prepare_host error handlingMarcin Slusarz1-1/+3
commit b9d5b89b487517cbd4cb4702da829e07ef9e4432 (sata_via: fix support for 5287) accidently (?) removed vt*_prepare_host error handling - restore it catched by gcc: drivers/ata/sata_via.c: In function 'svia_init_one': drivers/ata/sata_via.c:567: warning: 'host' may be used uninitialized in this function Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-04sata_promise: add ATA engine reset to reset opsMikael Pettersson1-0/+20
Promise ATA engines need to be reset when errors occur. That's currently done for errors detected by sata_promise itself, but it's not done for errors like timeouts detected outside of the low-level driver. The effect of this omission is that a timeout tends to result in a sequence of failed COMRESETs after which libata EH gives up and disables the port. At that point the port's ATA engine hangs and even reloading the driver will not resume it. To fix this, make sata_promise override ->hardreset on SATA ports with code which calls pdc_reset_port() on the port in question before calling libata's hardreset. PATA ports don't use ->hardreset, so for those we override ->softreset instead. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03niu: Use pci_ioremap_bar().David S. Miller1-5/+1
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03bnx2x: Version UpdateEilon Greenstein1-2/+2
Updating the version Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03bnx2x: Calling netif_carrier_off at the end of the probeEilon Greenstein1-2/+2
netif_carrier_off was called too early at the probe. In case of failure or simply bad timing, this can cause a fatal error since linkwatch_event might run too soon. Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03bnx2x: PCI configuration bug on big-endianEilon Greenstein1-4/+5
The current code read nothing but zeros on big-endian (wrong part of the 32bits). This caused poor performance on big-endian machines. Though this issue did not cause the system to crash, the performance is significantly better with the fix so I view it as critical bug fix. Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03bnx2x: Removing the PMF indication when unloadingEilon Greenstein1-0/+2
When the PMF flag is set, the driver can access the HW freely. When the driver is unloaded, it should not access the HW. The problem caused fatal errors when "ethtool -i" was called after the calling instance was unloaded and another instance was already loaded Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03PCI: fix range check on mmapped sysfs resource filesEd Swierk1-1/+1
pci_mmap_fits() returns the wrong answer if the sysfs resource file size is not a multiple of the page size. vm_end and vm_start are already page-aligned, so size - start < nr, causing mmap() to return EINVAL. Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-11-03PCI: remove excess kernel-doc notationRandy Dunlap1-2/+4
Fix pci/rom.c kernel-doc function notation: Warning(drivers/pci/rom.c:110): Excess function parameter or struct member 'return' description in 'pci_map_rom' Warning(drivers/pci/rom.c:177): Excess function parameter or struct member 'return' description in 'pci_map_rom_copy' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-11-03PCI: fix VPD limit quirk for Broadcom 5708SYu Zhao1-18/+18
VPD quirks need to be called after the VPD capability is initialized. Since VPD initialization now runs after pci_fixup_header (due to the capabilities consolidation), VPD quirks should be done at pci_fixup_final stage correspondingly. Tested-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-11-03mv643xx_eth: fix SMI bus access timeoutsLennert Buytenhek1-3/+6
The mv643xx_eth mii bus implementation uses wait_event_timeout() to wait for SMI completion interrupts. If wait_event_timeout() would return zero, mv643xx_eth would conclude that the SMI access timed out, but this is not necessarily true -- wait_event_timeout() can also return zero in the case where the SMI completion interrupt did happen in time but where it took longer than the requested timeout for the process performing the SMI access to be scheduled again. This would lead to occasional SMI access timeouts when the system would be under heavy load. The fix is to ignore the return value of wait_event_timeout(), and to re-check the SMI done bit after wait_event_timeout() returns to determine whether or not the SMI access timed out. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03net: kconfig cleanupJeff Kirsher1-3/+15
The bool kconfig option added to ixgbe and myri10ge for DCA is ambigous, so this patch adds a description to the kconfig option. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03fs_enet: fix pollingAlexey Dobriyan1-2/+4
1. compile fix for irqreturn_t type change 2. restore ->poll_controller after CONFIG_PPC_CPM_NEW_BINDING transition Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03Merge branch 'io-mappings-for-linus-2' of ↵Linus Torvalds2-94/+83
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'io-mappings-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: io mapping: clean up #ifdefs io mapping: improve documentation i915: use io-mapping interfaces instead of a variety of mapping kludges resources: add io-mapping functions to dynamically map large device apertures x86: add iomap_atomic*()/iounmap_atomic() on 32-bit using fixmaps
2008-11-03Merge branch 'drm-next' of ↵Linus Torvalds6-14/+48
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: i915: Add GEM ioctl to get available aperture size. drm/radeon: fixup further bus mastering confusion. build fix: CONFIG_DRM_I915=y && CONFIG_ACPI=n
2008-11-03SMC91x: Fix compilation on some platforms.David S. Miller1-0/+2
This reverts 51ac3beffd4afaea4350526cf01fe74aaff25eff ('SMC91x: delete unused local variable "lp"') and adds __maybe_unused markers to these (potentially) unused variables. The issue is that in some configurations SMC_IO_SHIFT evaluates to '(lp->io_shift)', but in some others it's plain '0'. Based upon a build failure report from Manuel Lauss. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03i915: Add GEM ioctl to get available aperture size.Eric Anholt3-0/+25
This will let userland know when to submit its batchbuffers, before they get too big to fit in the aperture. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds14-27/+46
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide-gd: re-get capacity on revalidate tx4938ide: Avoid underflow on calculation of a wait cycle tx4938ide: Do not call devm_ioremap for whole 128KB tx4938ide: Check minimum cycle time and SHWT range (v2) ide: Switch to a common address ide-cd: fix DMA alignment regression
2008-11-02ide-gd: re-get capacity on revalidateBorislav Petkov1-1/+6
We need to re-get a removable media's capacity when revalidating the disk so that its partitions get rescanned by the block layer. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: axboe@kernel.dk Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-11-02tx4938ide: Avoid underflow on calculation of a wait cycleAtsushi Nemoto1-2/+3
Make 'wt' variable signed while it can be negative during calculation. Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: sshtylyov@ru.mvista.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-11-02tx4938ide: Do not call devm_ioremap for whole 128KBAtsushi Nemoto1-11/+16
Call devm_ioremap() for CS0 and CS1 separetely. And some style cleanups. Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: ralf@linux-mips.org Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-11-02tx4938ide: Check minimum cycle time and SHWT range (v2)Atsushi Nemoto1-1/+8
SHWT value is used as address valid to -CSx assertion and -CSx to -DIOx assertion setup time, and contrarywise, -DIOx to -CSx release and -CSx release to address invalid hold time, so it actualy applies 4 times and so constitutes -DIOx recovery time. Check requirement of the recovery time and cycle time. Also check SHWT maximum value. Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: ralf@linux-mips.org Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-11-02ide: Switch to a common addressAlan Cox11-11/+11
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-11-02ide-cd: fix DMA alignment regressionBorislav Petkov1-1/+2
e5318b531b008c79d2a0c0df06a7b8628da38e2f ("ide: use the dma safe check for REQ_TYPE_ATA_PC") introduced a regression which caused some ATAPI drives to turn off DMA for REQ_TYPE_BLOCK_PC commands while burning and thus degrading performance and ultimately causing an excessive amount of underruns. The issue is documented also in: http://bugzilla.kernel.org/show_bug.cgi?id=11742. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Tested-by: Valerio Passini <valerio.passini@unicam.it> [bart: fixup patch description per comments from Sergei Shtylyov] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-11-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds25-78/+121
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (33 commits) af_unix: netns: fix problem of return value IRDA: remove double inclusion of module.h udp: multicast packets need to check namespace net: add documentation for skb recycling key: fix setkey(8) policy set breakage bpa10x: free sk_buff with kfree_skb xfrm: do not leak ESRCH to user space net: Really remove all of LOOPBACK_TSO code. netfilter: nf_conntrack_proto_gre: switch to register_pernet_gen_subsys() netns: add register_pernet_gen_subsys/unregister_pernet_gen_subsys net: delete excess kernel-doc notation pppoe: Fix socket leak. gianfar: Don't reset TBI<->SerDes link if it's already up gianfar: Fix race in TBI/SerDes configuration at91_ether: request/free GPIO for PHY interrupt amd8111e: fix dma_free_coherent context atl1: fix vlan tag regression SMC91x: delete unused local variable "lp" myri10ge: fix stop/go mmio ordering bonding: fix panic when taking bond interface down before removing module ...
2008-11-02drivers/net/smc911x.c: Fix lockdep warning on xmit.Will Newton1-1/+1
dev_kfree_skb should not be called with irqs disabled, use dev_kfree_skb_irq instead. The warning caused looks like this: ====================================================== [ INFO: hard-safe -> hard-unsafe lock order detected ] 2.6.28-rc1 #273 ------------------------------------------------------ swapper/0 [HC0[0]:SC1[2]:HE0:SE0] is trying to acquire: (clock-AF_INET){-..+}, at: [<4015c17c>] _sock_def_write_space+0x28/0xd8 and this task is already holding: (&lp->lock){++..}, at: [<4013f230>] _smc911x_hard_start_xmit+0x30/0x4b8 which would create a new lock dependency: (&lp->lock){++..} -> (clock-AF_INET){-..+} Signed-off-by: Will Newton <will.newton@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-01IRDA: remove double inclusion of module.hAlexander Beregalov2-2/+0
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Powered by cgit, Gruvboxed by Blaster4385.