aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-02-02drm/amd/display: [FW Promotion] Release 0.0.50Anthony Koo1-2/+2
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Reject too small viewport size when validating planeNikola Cornij3-3/+29
[why] Overlay won't move to a new positon if viewport size is smaller than what can be handled. It'd either disappear or stay at the old position. This condition is for example hit if overlay is moved too much outside of left or top edge of the screen, but it applies to any non-cursor plane type. [how] Reject this contidion at validation time. This gives the calling level a chance to handle this gracefully and avoid inconsistent behaivor. Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Better handling of dummy p-state tableJoshua Aberback1-7/+5
[Why] Some scenarios where we use a UCLK frequency in between dummy p-state table entries result in a p-state hang, due to the table not having a close enough match, so the default DPM0 latency is used, which can be too long to support dummy p-state switching in these scenarios. [How] - old: match if current freq is within +- margin of table entry - new: find largest table entry that is lower than current freq + margin - lower than DPM0 will still use DPM0 Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Workaround for some legacy DP-VGA donglesTaimur Hassan1-1/+12
[Why] Maximum resolution is 1440*900 when connecting to FHD monitor via some DP-VGA dongles. The display EDID reading fails over AUX/I2C via DP->VGA dongle, and this leads to the maximum resolution 1920*1080 cannot be obtained from EDID. [How] Provide a workaround for some legacy DP-VGA dongles with a longer aux delay. Signed-off-by: Taimur Hassan <syed.hassan@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Decrement refcount of dc_sink before reassignmentVictor Lu1-1/+3
[why] An old dc_sink state is causing a memory leak because it is missing a dc_sink_release before a new dc_sink is assigned back to aconnector->dc_sink. [how] Decrement the dc_sink refcount before reassigning it to a new dc_sink. Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Free atomic state after drm_atomic_commitVictor Lu1-8/+6
[why] drm_atomic_commit was changed so that the caller must free their drm_atomic_state reference on successes. [how] Add drm_atomic_commit_put after drm_atomic_commit call in dm_force_atomic_commit. Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: remove unused force_ignore_link_settings debug optionWenjing Liu2-4/+0
[why] Remove force_ignore_link_settings debug option as it is no longer used. Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Add Freesync HDMI support to DMCUStylon Wang6-1/+268
[Why] Adding support for Freesync HDMI to DC and DMCU [How] Create DC interface and implementation on top of DMCU to support parsing CEA blocks in DMCU. Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Enable "trigger_hotplug" debugfs on all outputsStylon Wang1-4/+6
[Why] Per-connector debugfs entry "trigger_hotplug" is available on DP/eDP only. New IGT tests need this entry to test other outputs. [How] Enable this debugfs entry on all types of connectors Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Fix CW4 programming for dmub30 cached inboxNicholas Kazlauskas3-2/+4
[Why] The conditions for whether we used cached vs non-cached inbox1 depend on a version check that mismatches what the shared helpers in dmub20 implement. [How] Use the dmub_dcn20_use_cached_inbox check for dmub_dcn30 as well. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: fix initial bounding box values for dcn3.02Samson Tam3-10/+184
[Why] Initial bounding box values are updated in dcn30_update_bw_bounding_box but they use dcn3_0_soc and dcn3_0_ip instead of dcn3_02_soc and dcn3_02_ip [How] Add dcn302_update_bw_bounding_box and dcn302_get_optimal_dcfclk_fclk_for_uclk so it uses dcn3_02_soc and dcn3_02_ip. Use sr_exit_time_us, sr_enter_plus_exit_time_us, from dcn30 on dcn302 to fix flicker on eDP. Also use dram_clock_change_latency_us from dcn30. Signed-off-by: Samson Tam <Samson.Tam@amd.com> Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: implement support for DID2.0 dsc passthroughJun Lei3-14/+23
[Why] Some panels contain active converters (e.g. DP to MIPI) which only support restricted DSC configurations. DID2.0 adds support for such displays to explicitly define per timing BPP restrictions on DSC. Ignoring these restrictions leads to blackscreen. [How] Add parsing in DID2.0 parser to get this bpp info. Add support in DSC module to constraint target bpp based on this info. Signed-off-by: Jun Lei <jun.lei@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Fix dc_sink kref count in emulated_link_detectVictor Lu1-2/+2
[why] prev_sink is not used anywhere else in the function and the reference to it from dc_link is replaced with a new dc_sink. [how] Change dc_sink_retain(prev_sink) to dc_sink_release(prev_sink). Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Release DSC before acquiringMikita Lipski1-1/+5
[why] Need to unassign DSC from pipes that are not using it so other pipes can acquire it. That is needed for asic's that have unmatching number of DSC engines from the number of pipes. [how] Before acquiring dsc to stream resources, first remove it. Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Eryk Brol <Eryk.Brol@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Revert "Fix EDID parsing after resume from suspend"Stylon Wang1-2/+0
This reverts commit b24bdc37d03a0478189e20a50286092840f414fa. It caused memory leak after S3 on 4K HDMI displays. Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: fix calculation for the pwl backlight curveAnthony Koo1-1/+1
[Why] The PWL backlight curve is used by the firmware to convert between brightness and linear PWM value. Driver has a backlight LUT, but the firmware holds a PWL curve and interpolates between points. The calculations are incorrect leading to slightly off backlight values being programmed. [How] Fix the PWL backlight curve threshold/offset calculations Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Josip Pavic <Josip.Pavic@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: 3.2.120Aric Cyr1-1/+1
This DC update brings improvements in multiple areas. In summary, we highlight: - Fix display detection on HDMI ComboPHY - Drop SOC bounding box hookup - Fix DPCD values Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: [FW Promotion] Release 0.0.49Anthony Koo1-2/+3
- Add field for passing line time for a frame Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Add more Clock Sources to DCN2.1Sung Lee1-0/+10
[WHY] When enabling HDMI on ComboPHY, there are not enough clock sources to complete display detection. [HOW] Initialize more clock sources. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: correct some hdcp variable namingWenjing Liu6-17/+19
[why] In HDCP update stream config interface, some variables are named as xxx_supported, but in fact the variable indicates whether or not xxx_enabled. Correct the naming so it is less confusing to read the code. Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Set power_gated to true for seamless boot pipe initLewis Huang1-0/+1
[Why] In seamless boot without a flip case, the flag power_gated didn't get cleared when resetting path mode because the plane_state is null. The following sequence will cause this issue: 1. OS call set mode to clone/extended 2. Reset path mode to remove edp [How] Set power gated default to true in seamless boot pipe Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: reuse current context instead of recreating oneBhawanpreet Lakha3-23/+30
[Why] Currently we discard the current context and recreate it. The current context is what is applied to the HW so we should be re-using this rather than creating a new context. Recreating the context can lead to mismatch between new context and the current context For example: gsl groups get changed when we create a new context this can cause issues in a multi display config (with flip immediate) because we don't align the existing gsl groups in the new and current context. If we reuse the current context the gsl group assignment stays the same. [How] Instead of discarding the current context, we instead just copy the current state and add/remove planes and streams. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Add null pointer check to is_dig_enabled funcMichael Strauss1-1/+2
[WHY] Safeguarding as pointer may be null in diagnostic environment Signed-off-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Sung Lee <Sung.Lee@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: initialize i2c speed if not initialized in dcnxxx__resource.cBrendan Steve Leder1-0/+4
Some dcnxxx__resource.c do not initialize the i2c speed; this patch adds the required initialization at dc_construct(). Signed-off-by: Brendan Steve Leder <brendanSteve.Leder@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Fix DPCD translation for LTTPR AUX_RD_INTERVALGeorge Shen1-3/+3
[Why] The translation between the DPCD value and the specified AUX_RD_INTERVAL in the DP spec do not match. [How] Update values to match the spec. Signed-off-by: George Shen <george.shen@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Drop SOC bounding box hookup in DM/DCNicholas Kazlauskas6-330/+4
[Why] There aren't any ASIC where we use these binaries and they aren't useful for future use since it's inconvenient to extend and maintain these structures. [How] Drop the support from DM and DC for now. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Acked-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amdgpu: enable freesync for A+A configsChristian König2-3/+7
Some newer APUs can scanout directly from GTT, that saves us from allocating another bounce buffer in VRAM and enables freesync in such configurations. Without this patch creating a framebuffer from the imported BO will fail and userspace will fall back to a copy. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Shashank Sharma <shashank.sharma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/pm: remove some useless code for vangoghXiaojian Du1-3/+0
This patch is to remove some useless code for vangogh. In the earlier code, vangogh can't finish all the sequence of smu late init. But now vangogh has one stable work state,so remove the useless code. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/pm: fill in the data member of v2 gpu metrics table for vangoghXiaojian Du1-0/+3
This patch is to fill in the data member of v2 gpu metrics table for vangogh. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amdgpu/gfx10: update CGTS_TCC_DISABLE and CGTS_USER_TCC_DISABLE register ↵chen gong1-2/+16
offsets for VGH For Vangogh: The offset of the CGTS_TCC_DISABLE is 0x5006 by calculation. The offset of the CGTS_USER_TCC_DISABLE is 0x5007 by calculation. Signed-off-by: chen gong <curry.gong@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amdgpu: Fix a false positive when pin non-VRAM memoryxinhui pan1-1/+2
Flag TTM_PL_FLAG_CONTIGUOUS is only valid for VRAM domain. So fix the false positive by checking memory type too. Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: xinhui pan <xinhui.pan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amdgpu: Limit the maximum size of contiguous VRAM that can be ↵Ramesh Errabolu1-0/+3
encapsulated by an instance of DRM memory node [Why] Enable 1:1 mapping between VRAM of a DRM node and a scatterlist node [How] Ensure construction of DRM node to not exceed specified limit Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amdkfd: fix null pointer panic while free buffer in kfdHuang Rui1-10/+6
In drm_gem_object_free, it will call funcs of drm buffer obj. So kfd_alloc should use amdgpu_gem_object_create instead of amdgpu_bo_create to initialize the funcs as amdgpu_gem_object_funcs. [ 396.231390] amdgpu: Release VA 0x7f76b4ada000 - 0x7f76b4add000 [ 396.231394] amdgpu: remove VA 0x7f76b4ada000 - 0x7f76b4add000 in entry 0000000085c24a47 [ 396.231408] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 396.231445] #PF: supervisor read access in kernel mode [ 396.231466] #PF: error_code(0x0000) - not-present page [ 396.231484] PGD 0 P4D 0 [ 396.231495] Oops: 0000 [#1] SMP NOPTI [ 396.231509] CPU: 7 PID: 1352 Comm: clinfo Tainted: G OE 5.11.0-rc2-custom #1 [ 396.231537] Hardware name: AMD Celadon-RN/Celadon-RN, BIOS WCD0401N_Weekly_20_04_0 04/01/2020 [ 396.231563] RIP: 0010:drm_gem_object_free+0xc/0x22 [drm] [ 396.231606] Code: eb ec 48 89 c3 eb e7 0f 1f 44 00 00 55 48 89 e5 48 8b bf 00 06 00 00 e8 72 0d 01 00 5d c3 0f 1f 44 00 00 48 8b 87 40 01 00 00 <48> 8b 00 48 85 c0 74 0b 55 48 89 e5 e8 54 37 7c db 5d c3 0f 0b c3 [ 396.231666] RSP: 0018:ffffb4704177fcf8 EFLAGS: 00010246 [ 396.231686] RAX: 0000000000000000 RBX: ffff993a0d0cc400 RCX: 0000000000003113 [ 396.231711] RDX: 0000000000000001 RSI: e9cda7a5d0791c6d RDI: ffff993a333a9058 [ 396.231736] RBP: ffffb4704177fdd0 R08: ffff993a03855858 R09: 0000000000000000 [ 396.231761] R10: ffff993a0d1f7158 R11: 0000000000000001 R12: 0000000000000000 [ 396.231785] R13: ffff993a0d0cc428 R14: 0000000000003000 R15: ffffb4704177fde0 [ 396.231811] FS: 00007f76b5730740(0000) GS:ffff993b275c0000(0000) knlGS:0000000000000000 [ 396.231840] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 396.231860] CR2: 0000000000000000 CR3: 000000016d2e2000 CR4: 0000000000350ee0 [ 396.231885] Call Trace: [ 396.231897] ? amdgpu_amdkfd_gpuvm_free_memory_of_gpu+0x24c/0x25f [amdgpu] [ 396.232056] ? __dynamic_dev_dbg+0xcd/0x100 [ 396.232076] kfd_ioctl_free_memory_of_gpu+0x91/0x102 [amdgpu] [ 396.232214] kfd_ioctl+0x211/0x35b [amdgpu] [ 396.232341] ? kfd_ioctl_get_queue_wave_state+0x52/0x52 [amdgpu] Fixes: 246cb7e49a70 ("drm/amdgpu: Introduce GEM object functions") Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Tested-by: Changfeng <changzhu@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amdgpu: fix the issue that retry constantly once the buffer is oversizeHuang Rui1-1/+1
We cannot modify initial_domain every time while the retry starts. That will cause the busy waiting that unable to switch to GTT while the vram is not enough. Fixes: f8aab60422c3 ("drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs") Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-01drm/amdgpu/swsmu: use percent rather than rpm for manual fan control (v2)Alex Deucher7-103/+86
On some boards the rpm interface apparently does not work at all leading to the fan not spinning or spinning at strange speeds. Both interfaces work properly on the boards I have. Let's try and use the percent interface instead. v2: rebase on revert Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1408 Reviewed-by: Evan Quan <evan.quan@amd.com> (v1) Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-01Revert "drm/amdgpu/swsmu: drop set_fan_speed_percent (v2)"Alex Deucher7-9/+39
On some boards the rpm interface apparently does not work at all leading to the fan not spinning or spinning at strange speeds. Revert this for now to fix 5.10, 5.11. The follow on patch fixes this properly for 5.12. This reverts commit 8d6e65adc25e23fabbc5293b6cd320195c708dca. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1408 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-01drm/amd/display: Simplify bool conversionAbaci Team1-1/+1
Fix the following coccicheck warning: ./drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c:3137:35-40: WARNING: conversion to bool not needed here Reported-by: Abaci Robot <abaci@linux.alibaba.com> Suggested-by: Yang Li <oswb@linux.alibaba.com> Signed-off-by: Abaci Team <abaci-bugfix@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-01amdgpu: Add Missing Sienna Cichlid DIDOri Messinger1-0/+1
The purpose of this patch is to add a missing device ID for Sienna Cichlid. The missing ID "0x73A1" is now added to the "amdgpu_drv.c" file. Signed-off-by: Ori Messinger <Ori.Messinger@amd.com> Reviewed-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-01drm/amd/pm: correct string parsing for extra separator characters caseEvan Quan1-0/+2
Supplement of previous fix. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-01drm/amdgpu/pm: Account for extra separator characters in sysfs interfaceMatt Coffin1-0/+2
Currently, the the input to the pp_od_clk_voltage sysfs interface has two adjacent separator characters, i.e. "\n\0", then we try to parse an argument out of the empty string, whereas we really should just ignore this case, and treat any number of adjacent separators as one separator for arguments. We do this here by simply skipping the argument parsing for all empy-string arguments. An example test case would be `echo 's 1 900' > pp_od_clk_voltage` (note the two spaces after the 's'. This also solves the issue where the written string ends with both a newline, and a nul-terminator, '\n\0', as is the case for `echo 's 1 900' > pp_od_clk_voltage` since the recent rebase. Got lost during code rebase/merge. No need to port this to other branches. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Matt Coffin <mcoffin13@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-01Revert "Revert "drm/amdgpu: Fix NULL dereference in dpm sysfs handlers""Evan Quan1-6/+3
This reverts commit 2456c290a7889be492cb96092b62d16c11176f72. Got lost during code rebase/merge. No need to port this to other branches. Signed-off-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-01Merge branch 'linux-5.12' of git://github.com/skeggsb/linux into drm-nextDave Airlie16-167/+675
Nothing too major here, I actually thought I'd sent most of these right before the new year, but that apparently got lost in the bustle: - Turing MMU fault recovery fixes - Fix mDP connectors being reported as eDP to userspace - Fixes for audio locking, and other bit-rot from DRM changes since atomic support was written - Misc other minor fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv7yLfhuVbYa-4g0vxVt93OaC7Sodiz2R-TDHu-MoofEdw@mail.gmail.com
2021-01-29drm/i915/dp: Prevent setting the LTTPR LT mode if no LTTPRs are detectedImre Deak1-21/+15
Atm, the driver programs explicitly the default transparent link training mode (0x55) to DP_PHY_REPEATER_MODE even if no LTTPRs are detected. This conforms to the spec (3.6.6.1): "DP upstream devices that do not enable the Non-transparent mode of LTTPRs shall program the PHY_REPEATER_MODE register (DPCD Address F0003h) to 55h (default) prior to link training" however writing the default value to this DPCD register seems to cause occasional link training errors at least for a DELL WD19TB TBT dock, when no LTTPRs are detected. Writing to DP_PHY_REPEATER_MODE will also cause an unnecessary timeout on systems without any LTTPR. To fix the above two issues let's assume that setting the default mode is redundant when no LTTPRs are detected. Keep the existing behavior and program the default mode if more than 8 LTTPRs are detected or in case the read from DP_PHY_REPEATER_CNT returns an invalid value. References: https://gitlab.freedesktop.org/drm/intel/-/issues/2801 Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Khaled Almahallawy <khaled.almahallawy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210118183143.1145707-1-imre.deak@intel.com
2021-01-29drm/i915: Implement async flips for vlv/chvVille Syrjälä4-6/+52
Add support for async flips on vlv/chv. Unlike all the other platforms vlv/chv do not use the async flip bit in DSPCNTR and instead we select between async vs. sync flips based on the surface address register. The normal DSPSURF generates sync flips DSPADDR_VLV generates async flips. And as usual the interrupt bits are different from the other platforms. Cc: Karthik B S <karthik.b.s@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-12-ville.syrjala@linux.intel.com Reviewed-by: Karthik B S <karthik.b.s@intel.com>
2021-01-29drm/i915: Implement async flip for ilk/snbVille Syrjälä3-1/+31
Add support for async flips on ivb/hsw. Again no need for any workarounds and just have to deal with the interrupt bits being shuffled around a bit. Cc: Karthik B S <karthik.b.s@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-11-ville.syrjala@linux.intel.com Reviewed-by: Karthik B S <karthik.b.s@intel.com>
2021-01-29drm/i915: Implement async flip for ivb/hswVille Syrjälä3-1/+32
Add support for async flips on ivb/hsw. Unlike bdw+ we don't need any workarounds to disable async flips. Apart from that the only real difference from the bdw implementation is the location of the flip_done interrupt bits. Cc: Karthik B S <karthik.b.s@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-10-ville.syrjala@linux.intel.com Reviewed-by: Karthik B S <karthik.b.s@intel.com>
2021-01-29drm/i915: Implement async flips for bdwVille Syrjälä4-14/+73
Implement async flip support for BDW. The implementation is similar to the skl+ code. And just like skl/bxt/glk bdw also needs the disable w/a, thus we need to plumb the desired state of the async flip all the way down to i9xx_plane_ctl_crtc(). According to the spec we do need to bump the surface alignment to 256KiB for this. Async flips require an X-tiled buffer so we don't have to worry about linear. Cc: Karthik B S <karthik.b.s@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-9-ville.syrjala@linux.intel.com Reviewed-by: Karthik B S <karthik.b.s@intel.com>
2021-01-29drm/i915: Limit plane stride to below TILEOFF.x limitVille Syrjälä3-16/+83
Limit pre-skl plane stride to below 4k or 8k pixels (depending on the platform). We do this in order guarantee that TILEOFF/OFFSET.x does not get too big. Currently this is not a problem as we align SURF to 4k, and so TILEOFF/OFFSET only have to deal with a single tile's worth of pixels. But for async flips we're going to have to bump SURF alignment to 256k, and thus we can no longer guarantee TILEOFF/OFFSET.x will stay within acceptable bounds. We can avoid this by borrowing a trick from the skl+ code and limit the max plane stride to whatever value we can fit into TILEOFF/OFFSET.x. The slight downside is that we may end up doing GTT remapping in a few more cases where previously we did not have to. But since that will only happen with huge buffers I'm not really concerned about it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-3-ville.syrjala@linux.intel.com Reviewed-by: Karthik B S <karthik.b.s@intel.com>
2021-01-29drm/i915: Rename is_16gb_dimm to wm_lv_0_adjust_neededJosé Roberto de Souza3-10/+9
As it now it is always required for GEN12+ the is_16gb_dimm name do not make sense for GEN12+. v2: - Updated comment on top of "dram_info->wm_lv_0_adjust_needed = !IS_GEN9_LP(i915);" Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210128164312.91160-3-jose.souza@intel.com
2021-01-29drm/i915/gen11+: Only load DRAM information from pcodeJosé Roberto de Souza4-75/+93
Up to now we were reading some DRAM information from MCHBAR register and from pcode what is already not good but some GEN12(TGL-H and ADL-S) platforms have MCHBAR DRAM information in different offsets. This was notified to HW team that decided that the best alternative is always apply the 16gb_dimm watermark adjustment for GEN12+ platforms and read the remaning DRAM information needed to other display programming from pcode. So here moving the DRAM pcode function to intel_dram.c, removing the duplicated fields from intel_qgv_info, setting and using information from dram_info. v2: - bring back num_points to intel_qgv_info as num_qgv_point can be overwritten in icl_get_qgv_points() - add gen12_get_dram_info() and simplify gen11_get_dram_info() Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210128164312.91160-2-jose.souza@intel.com
Powered by cgit, Gruvboxed by Blaster4385.