aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2018-11-27net: via: via-velocity: fix spelling mistake "alignement" -> "alignment"Colin Ian King1-1/+1
The text in array velocity_gstrings contains a spelling mistake, rename rx_frame_alignement_errors to rx_frame_alignment_errors. Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-27qed: fix spelling mistake "attnetion" -> "attention"Colin Ian King1-1/+1
The text in array s_igu_fifo_error_strs contains a spelling mistake, fix it. Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-27net: thunderx: fix NULL pointer dereference in nic_removeLorenzo Bianconi1-0/+3
Fix a possible NULL pointer dereference in nic_remove routine removing the nicpf module if nic_probe fails. The issue can be triggered with the following reproducer: $rmmod nicvf $rmmod nicpf [ 521.412008] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000014 [ 521.422777] Mem abort info: [ 521.425561] ESR = 0x96000004 [ 521.428624] Exception class = DABT (current EL), IL = 32 bits [ 521.434535] SET = 0, FnV = 0 [ 521.437579] EA = 0, S1PTW = 0 [ 521.440730] Data abort info: [ 521.443603] ISV = 0, ISS = 0x00000004 [ 521.447431] CM = 0, WnR = 0 [ 521.450417] user pgtable: 4k pages, 48-bit VAs, pgdp = 0000000072a3da42 [ 521.457022] [0000000000000014] pgd=0000000000000000 [ 521.461916] Internal error: Oops: 96000004 [#1] SMP [ 521.511801] Hardware name: GIGABYTE H270-T70/MT70-HD0, BIOS T49 02/02/2018 [ 521.518664] pstate: 80400005 (Nzcv daif +PAN -UAO) [ 521.523451] pc : nic_remove+0x24/0x88 [nicpf] [ 521.527808] lr : pci_device_remove+0x48/0xd8 [ 521.532066] sp : ffff000013433cc0 [ 521.535370] x29: ffff000013433cc0 x28: ffff810f6ac50000 [ 521.540672] x27: 0000000000000000 x26: 0000000000000000 [ 521.545974] x25: 0000000056000000 x24: 0000000000000015 [ 521.551274] x23: ffff8007ff89a110 x22: ffff000001667070 [ 521.556576] x21: ffff8007ffb170b0 x20: ffff8007ffb17000 [ 521.561877] x19: 0000000000000000 x18: 0000000000000025 [ 521.567178] x17: 0000000000000000 x16: 000000000000010ffc33ff98 x8 : 0000000000000000 [ 521.593683] x7 : 0000000000000000 x6 : 0000000000000001 [ 521.598983] x5 : 0000000000000002 x4 : 0000000000000003 [ 521.604284] x3 : ffff8007ffb17184 x2 : ffff8007ffb17184 [ 521.609585] x1 : ffff000001662118 x0 : ffff000008557be0 [ 521.614887] Process rmmod (pid: 1897, stack limit = 0x00000000859535c3) [ 521.621490] Call trace: [ 521.623928] nic_remove+0x24/0x88 [nicpf] [ 521.627927] pci_device_remove+0x48/0xd8 [ 521.631847] device_release_driver_internal+0x1b0/0x248 [ 521.637062] driver_detach+0x50/0xc0 [ 521.640628] bus_remove_driver+0x60/0x100 [ 521.644627] driver_unregister+0x34/0x60 [ 521.648538] pci_unregister_driver+0x24/0xd8 [ 521.652798] nic_cleanup_module+0x14/0x111c [nicpf] [ 521.657672] __arm64_sys_delete_module+0x150/0x218 [ 521.662460] el0_svc_handler+0x94/0x110 [ 521.666287] el0_svc+0x8/0xc [ 521.669160] Code: aa1e03e0 9102c295 d503201f f9404eb3 (b9401660) Fixes: 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller") Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-27firestream: fix spelling mistake: "Inititing" -> "Initializing"Colin Ian King1-2/+2
There are spelling mistakes in debug messages, fix them. Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-27net: phy: add workaround for issue where PHY driver doesn't bind to the deviceHeiner Kallweit1-0/+8
After switching the r8169 driver to use phylib some user reported that their network is broken. This was caused by the genphy PHY driver being used instead of the dedicated PHY driver for the RTL8211B. Users reported that loading the Realtek PHY driver module upfront fixes the issue. See also this mail thread: https://marc.info/?t=154279781800003&r=1&w=2 The issue is quite weird and the root cause seems to be somewhere in the base driver core. The patch works around the issue and may be removed once the actual issue is fixed. The Fixes tag refers to the first reported occurrence of the issue. The issue itself may have been existing much longer and it may affect users of other network chips as well. Users typically will recognize this issue only if their PHY stops working when being used with the genphy driver. Fixes: f1e911d5d0df ("r8169: add basic phylib support") Signed-off-by: Heiner Kallweit <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-27usbnet: ipheth: fix potential recvmsg bug and recvmsg bug 2Bernd Eckstein1-6/+4
The bug is not easily reproducable, as it may occur very infrequently (we had machines with 20minutes heavy downloading before it occurred) However, on a virual machine (VMWare on Windows 10 host) it occurred pretty frequently (1-2 seconds after a speedtest was started) dev->tx_skb mab be freed via dev_kfree_skb_irq on a callback before it is set. This causes the following problems: - double free of the skb or potential memory leak - in dmesg: 'recvmsg bug' and 'recvmsg bug 2' and eventually general protection fault Example dmesg output: [ 134.841986] ------------[ cut here ]------------ [ 134.841987] recvmsg bug: copied 9C24A555 seq 9C24B557 rcvnxt 9C25A6B3 fl 0 [ 134.841993] WARNING: CPU: 7 PID: 2629 at /build/linux-hwe-On9fm7/linux-hwe-4.15.0/net/ipv4/tcp.c:1865 tcp_recvmsg+0x44d/0xab0 [ 134.841994] Modules linked in: ipheth(OE) kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd glue_helper cryptd vmw_balloon intel_rapl_perf joydev input_leds serio_raw vmw_vsock_vmci_transport vsock shpchp i2c_piix4 mac_hid binfmt_misc vmw_vmci parport_pc ppdev lp parport autofs4 vmw_pvscsi vmxnet3 hid_generic usbhid hid vmwgfx ttm drm_kms_helper syscopyarea sysfillrect mptspi mptscsih sysimgblt ahci psmouse fb_sys_fops pata_acpi mptbase libahci e1000 drm scsi_transport_spi [ 134.842046] CPU: 7 PID: 2629 Comm: python Tainted: G W OE 4.15.0-34-generic #37~16.04.1-Ubuntu [ 134.842046] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017 [ 134.842048] RIP: 0010:tcp_recvmsg+0x44d/0xab0 [ 134.842048] RSP: 0018:ffffa6630422bcc8 EFLAGS: 00010286 [ 134.842049] RAX: 0000000000000000 RBX: ffff997616f4f200 RCX: 0000000000000006 [ 134.842049] RDX: 0000000000000007 RSI: 0000000000000082 RDI: ffff9976257d6490 [ 134.842050] RBP: ffffa6630422bd98 R08: 0000000000000001 R09: 000000000004bba4 [ 134.842050] R10: 0000000001e00c6f R11: 000000000004bba4 R12: ffff99760dee3000 [ 134.842051] R13: 0000000000000000 R14: ffff99760dee3514 R15: 0000000000000000 [ 134.842051] FS: 00007fe332347700(0000) GS:ffff9976257c0000(0000) knlGS:0000000000000000 [ 134.842052] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 134.842053] CR2: 0000000001e41000 CR3: 000000020e9b4006 CR4: 00000000003606e0 [ 134.842055] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 134.842055] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 134.842057] Call Trace: [ 134.842060] ? aa_sk_perm+0x53/0x1a0 [ 134.842064] inet_recvmsg+0x51/0xc0 [ 134.842066] sock_recvmsg+0x43/0x50 [ 134.842070] SYSC_recvfrom+0xe4/0x160 [ 134.842072] ? __schedule+0x3de/0x8b0 [ 134.842075] ? ktime_get_ts64+0x4c/0xf0 [ 134.842079] SyS_recvfrom+0xe/0x10 [ 134.842082] do_syscall_64+0x73/0x130 [ 134.842086] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 134.842086] RIP: 0033:0x7fe331f5a81d [ 134.842088] RSP: 002b:00007ffe8da98398 EFLAGS: 00000246 ORIG_RAX: 000000000000002d [ 134.842090] RAX: ffffffffffffffda RBX: ffffffffffffffff RCX: 00007fe331f5a81d [ 134.842094] RDX: 00000000000003fb RSI: 0000000001e00874 RDI: 0000000000000003 [ 134.842095] RBP: 00007fe32f642c70 R08: 0000000000000000 R09: 0000000000000000 [ 134.842097] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe332347698 [ 134.842099] R13: 0000000001b7e0a0 R14: 0000000001e00874 R15: 0000000000000000 [ 134.842103] Code: 24 fd ff ff e9 cc fe ff ff 48 89 d8 41 8b 8c 24 10 05 00 00 44 8b 45 80 48 c7 c7 08 bd 59 8b 48 89 85 68 ff ff ff e8 b3 c4 7d ff <0f> 0b 48 8b 85 68 ff ff ff e9 e9 fe ff ff 41 8b 8c 24 10 05 00 [ 134.842126] ---[ end trace b7138fc08c83147f ]--- [ 134.842144] general protection fault: 0000 [#1] SMP PTI [ 134.842145] Modules linked in: ipheth(OE) kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd glue_helper cryptd vmw_balloon intel_rapl_perf joydev input_leds serio_raw vmw_vsock_vmci_transport vsock shpchp i2c_piix4 mac_hid binfmt_misc vmw_vmci parport_pc ppdev lp parport autofs4 vmw_pvscsi vmxnet3 hid_generic usbhid hid vmwgfx ttm drm_kms_helper syscopyarea sysfillrect mptspi mptscsih sysimgblt ahci psmouse fb_sys_fops pata_acpi mptbase libahci e1000 drm scsi_transport_spi [ 134.842161] CPU: 7 PID: 2629 Comm: python Tainted: G W OE 4.15.0-34-generic #37~16.04.1-Ubuntu [ 134.842162] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017 [ 134.842164] RIP: 0010:tcp_close+0x2c6/0x440 [ 134.842165] RSP: 0018:ffffa6630422bde8 EFLAGS: 00010202 [ 134.842167] RAX: 0000000000000000 RBX: ffff99760dee3000 RCX: 0000000180400034 [ 134.842168] RDX: 5c4afd407207a6c4 RSI: ffffe868495bd300 RDI: ffff997616f4f200 [ 134.842169] RBP: ffffa6630422be08 R08: 0000000016f4d401 R09: 0000000180400034 [ 134.842169] R10: ffffa6630422bd98 R11: 0000000000000000 R12: 000000000000600c [ 134.842170] R13: 0000000000000000 R14: ffff99760dee30c8 R15: ffff9975bd44fe00 [ 134.842171] FS: 00007fe332347700(0000) GS:ffff9976257c0000(0000) knlGS:0000000000000000 [ 134.842173] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 134.842174] CR2: 0000000001e41000 CR3: 000000020e9b4006 CR4: 00000000003606e0 [ 134.842177] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 134.842178] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 134.842179] Call Trace: [ 134.842181] inet_release+0x42/0x70 [ 134.842183] __sock_release+0x42/0xb0 [ 134.842184] sock_close+0x15/0x20 [ 134.842187] __fput+0xea/0x220 [ 134.842189] ____fput+0xe/0x10 [ 134.842191] task_work_run+0x8a/0xb0 [ 134.842193] exit_to_usermode_loop+0xc4/0xd0 [ 134.842195] do_syscall_64+0xf4/0x130 [ 134.842197] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 134.842197] RIP: 0033:0x7fe331f5a560 [ 134.842198] RSP: 002b:00007ffe8da982e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 [ 134.842200] RAX: 0000000000000000 RBX: 00007fe32f642c70 RCX: 00007fe331f5a560 [ 134.842201] RDX: 00000000008f5320 RSI: 0000000001cd4b50 RDI: 0000000000000003 [ 134.842202] RBP: 00007fe32f6500f8 R08: 000000000000003c R09: 00000000009343c0 [ 134.842203] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe32f6500d0 [ 134.842204] R13: 00000000008f5320 R14: 00000000008f5320 R15: 0000000001cd4770 [ 134.842205] Code: c8 00 00 00 45 31 e4 49 39 fe 75 4d eb 50 83 ab d8 00 00 00 01 48 8b 17 48 8b 47 08 48 c7 07 00 00 00 00 48 c7 47 08 00 00 00 00 <48> 89 42 08 48 89 10 0f b6 57 34 8b 47 2c 2b 47 28 83 e2 01 80 [ 134.842226] RIP: tcp_close+0x2c6/0x440 RSP: ffffa6630422bde8 [ 134.842227] ---[ end trace b7138fc08c831480 ]--- The proposed patch eliminates a potential racing condition. Before, usb_submit_urb was called and _after_ that, the skb was attached (dev->tx_skb). So, on a callback it was possible, however unlikely that the skb was freed before it was set. That way (because dev->tx_skb was not set to NULL after it was freed), it could happen that a skb from a earlier transmission was freed a second time (and the skb we should have freed did not get freed at all) Now we free the skb directly in ipheth_tx(). It is not passed to the callback anymore, eliminating the posibility of a double free of the same skb. Depending on the retval of usb_submit_urb() we use dev_kfree_skb_any() respectively dev_consume_skb_any() to free the skb. Signed-off-by: Oliver Zweigle <[email protected]> Signed-off-by: Bernd Eckstein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-27nvme-pci: fix surprise removalIgor Konopko1-1/+1
When a PCIe NVMe device is not present, nvme_dev_remove_admin() calls blk_cleanup_queue() on the admin queue, which frees the hctx for that queue. Moments later, on the same path nvme_kill_queues() calls blk_mq_unquiesce_queue() on admin queue and tries to access hctx of it, which leads to following OOPS: Oops: 0000 [#1] SMP PTI RIP: 0010:sbitmap_any_bit_set+0xb/0x40 Call Trace: blk_mq_run_hw_queue+0xd5/0x150 blk_mq_run_hw_queues+0x3a/0x50 nvme_kill_queues+0x26/0x50 nvme_remove_namespaces+0xb2/0xc0 nvme_remove+0x60/0x140 pci_device_remove+0x3b/0xb0 Fixes: cb4bfda62afa2 ("nvme-pci: fix hot removal during error handling") Signed-off-by: Igor Konopko <[email protected]> Reviewed-by: Keith Busch <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2018-11-27nvme-fc: initialize nvme_req(rq)->ctrl after calling __nvme_fc_init_request()Ewan D. Milne1-1/+1
__nvme_fc_init_request() invokes memset() on the nvme_fcp_op_w_sgl structure, which NULLed-out the nvme_req(req)->ctrl field previously set by nvme_fc_init_request(). This apparently was not referenced until commit faf4a44fff ("nvme: support traffic based keep-alive") which now results in a crash in nvme_complete_rq(): [ 8386.897130] RIP: 0010:panic+0x220/0x26c [ 8386.901406] Code: 83 3d 6f ee 72 01 00 74 05 e8 e8 54 02 00 48 c7 c6 40 fd 5b b4 48 c7 c7 d8 8d c6 b3 31e [ 8386.922359] RSP: 0018:ffff99650019fc40 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 [ 8386.930804] RAX: 0000000000000046 RBX: 0000000000000000 RCX: 0000000000000006 [ 8386.938764] RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff8e325f8168b0 [ 8386.946725] RBP: ffff99650019fcb0 R08: 0000000000000000 R09: 00000000000004f8 [ 8386.954687] R10: 0000000000000000 R11: ffff99650019f9b8 R12: ffffffffb3c55f3c [ 8386.962648] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001 [ 8386.970613] oops_end+0xd1/0xe0 [ 8386.974116] no_context+0x1b2/0x3c0 [ 8386.978006] do_page_fault+0x32/0x140 [ 8386.982090] page_fault+0x1e/0x30 [ 8386.985786] RIP: 0010:nvme_complete_rq+0x65/0x1d0 [nvme_core] [ 8386.992195] Code: 41 bc 03 00 00 00 74 16 0f 86 c3 00 00 00 66 3d 83 00 41 bc 06 00 00 00 0f 85 e7 00 000 [ 8387.013147] RSP: 0018:ffff99650019fe18 EFLAGS: 00010246 [ 8387.018973] RAX: 0000000000000000 RBX: ffff8e322ae51280 RCX: 0000000000000001 [ 8387.026935] RDX: 0000000000000400 RSI: 0000000000000001 RDI: ffff8e322ae51280 [ 8387.034897] RBP: ffff8e322ae51280 R08: 0000000000000000 R09: ffffffffb2f0b890 [ 8387.042859] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 [ 8387.050821] R13: 0000000000000100 R14: 0000000000000004 R15: ffff8e2b0446d990 [ 8387.058782] ? swiotlb_unmap_page+0x40/0x40 [ 8387.063448] nvme_fc_complete_rq+0x2d/0x70 [nvme_fc] [ 8387.068986] blk_done_softirq+0xa1/0xd0 [ 8387.073264] __do_softirq+0xd6/0x2a9 [ 8387.077251] run_ksoftirqd+0x26/0x40 [ 8387.081238] smpboot_thread_fn+0x10e/0x160 [ 8387.085807] kthread+0xf8/0x130 [ 8387.089309] ? sort_range+0x20/0x20 [ 8387.093198] ? kthread_stop+0x110/0x110 [ 8387.097475] ret_from_fork+0x35/0x40 [ 8387.101462] ---[ end trace 7106b0adf5e422f8 ]--- Fixes: faf4a44fff ("nvme: support traffic based keep-alive") Signed-off-by: Ewan D. Milne <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2018-11-27efi: Prevent GICv3 WARN() by mapping the memreserve table before first useArd Biesheuvel1-10/+26
Mapping the MEMRESERVE EFI configuration table from an early initcall is too late: the GICv3 ITS code that creates persistent reservations for the boot CPU's LPI tables is invoked from init_IRQ(), which runs much earlier than the handling of the initcalls. This results in a WARN() splat because the LPI tables cannot be reserved persistently, which will result in silent memory corruption after a kexec reboot. So instead, invoke the initialization performed by the initcall from efi_mem_reserve_persistent() itself as well, but keep the initcall so that the init is guaranteed to have been called before SMP boot. Tested-by: Marc Zyngier <[email protected]> Tested-by: Jan Glauber <[email protected]> Tested-by: John Garry <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Fixes: 63eb322d89c8 ("efi: Permit calling efi_mem_reserve_persistent() ...") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-11-27PCI: dwc: Fix MSI-X EP framework address calculation bugGustavo Pimentel1-1/+0
Fix an error caused by 3-bit right rotation on offset address calculation of MSI-X table in dw_pcie_ep_raise_msix_irq(). The initial testing code was setting by default the offset address of MSI-X table to zero, so that even with a 3-bit right rotation the computed result would still be zero and valid, therefore this bug went unnoticed. Fixes: beb4641a787d ("PCI: dwc: Add MSI-X callbacks handler") Signed-off-by: Gustavo Pimentel <[email protected]> [[email protected]: updated commit log] Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: [email protected]
2018-11-27s390/zcrypt: reinit ap queue state machine during device probeHarald Freudenberger6-7/+20
Until the vfio-ap driver came into live there was a well known agreement about the way how ap devices are initialized and their states when the driver's probe function is called. However, the vfio device driver when receiving an ap queue device does additional resets thereby removing the registration for interrupts for the ap device done by the ap bus core code. So when later the vfio driver releases the device and one of the default zcrypt drivers takes care of the device the interrupt registration needs to get renewed. The current code does no renew and result is that requests send into such a queue will never see a reply processed - the application hangs. This patch adds a function which resets the aq queue state machine for the ap queue device and triggers the walk through the initial states (which are reset and registration for interrupts). This function is now called before the driver's probe function is invoked. When the association between driver and device is released, the driver's remove function is called. The current implementation calls a ap queue function ap_queue_remove(). This invokation has been moved to the ap bus function to make the probe / remove pair for ap bus and drivers more symmetric. Fixes: 7e0bdbe5c21c ("s390/zcrypt: AP bus support for alternate driver(s)") Cc: [email protected] # 4.19+ Signed-off-by: Harald Freudenberger <[email protected]> Reviewd-by: Tony Krowiak <[email protected]> Reviewd-by: Martin Schwidefsky <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2018-11-27misc: mic/scif: fix copy-paste error in scif_create_remote_lookupYueHaibing1-1/+1
gcc '-Wunused-but-set-variable' warning: drivers/misc/mic/scif/scif_rma.c: In function 'scif_create_remote_lookup': drivers/misc/mic/scif/scif_rma.c:373:25: warning: variable 'vmalloc_num_pages' set but not used [-Wunused-but-set-variable] 'vmalloc_num_pages' should be used to determine if the address is within the vmalloc range. Fixes: ba612aa8b487 ("misc: mic: SCIF memory registration and unregistration") Signed-off-by: YueHaibing <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-11-27nvme: Free ctrl device name on init failureKeith Busch1-1/+1
Free the kobject name that was allocated for the controller device on failure rather than its parent. Fixes: d22524a4782a9 ("nvme: switch controller refcounting to use struct device") Signed-off-by: Keith Busch <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2018-11-26IB/mlx5: Fix page fault handling for MWArtemy Kovalyov1-0/+1
Memory windows are implemented with an indirect MKey, when a page fault event comes for a MW Mkey we need to find the MR at the end of the list of the indirect MKeys by iterating on all items from the first to the last. The offset calculated during this process has to be zeroed after the first iteration or the next iteration will start from a wrong address, resulting incorrect ODP faulting behavior. Fixes: db570d7deafb ("IB/mlx5: Add ODP support to MW") Signed-off-by: Artemy Kovalyov <[email protected]> Signed-off-by: Moni Shoua <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2018-11-26IB/umem: Set correct address to the invalidation functionArtemy Kovalyov1-14/+6
The invalidate range was using PAGE_SIZE instead of the computed 'end', and had the wrong transformation of page_index due the weird construction. This can trigger during error unwind and would cause malfunction. Inline the code and correct the math. Fixes: 403cd12e2cf7 ("IB/umem: Add contiguous ODP support") Signed-off-by: Artemy Kovalyov <[email protected]> Signed-off-by: Moni Shoua <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2018-11-26IB/mlx5: Skip non-ODP MR when handling a page faultArtemy Kovalyov1-0/+8
It is possible that we call pagefault_single_data_segment() with a MKey that belongs to a memory region which is not on demand (i.e. pinned pages). This can happen if, for instance, a WQE that points to multiple MRs where some of them are ODP MRs and some are not. In this case we don't need to handle this MR in the ODP context besides reporting success. Otherwise the code will call pagefault_mr() which will do to_ib_umem_odp() on a non-ODP MR and thus access out of bounds. Fixes: 7bdf65d411c1 ("IB/mlx5: Handle page faults") Signed-off-by: Artemy Kovalyov <[email protected]> Signed-off-by: Moni Shoua <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2018-11-26drm/meson: add support for 1080p25 modeChristian Hewitt1-0/+1
This essential mode for PAL users is missing, so add it. Fixes: 335e3713afb87 ("drm/meson: Add support for HDMI venc modes and settings") Signed-off-by: Christian Hewitt <[email protected]> Acked-by: Neil Armstrong <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sean Paul <[email protected]>
2018-11-26drm/meson: Fix OOB memory accesses in meson_viu_set_osd_lut()Lyude Paul1-6/+6
Currently on driver bringup with KASAN enabled, meson triggers an OOB memory access as shown below: [ 117.904528] ================================================================== [ 117.904560] BUG: KASAN: global-out-of-bounds in meson_viu_set_osd_lut+0x7a0/0x890 [ 117.904588] Read of size 4 at addr ffff20000a63ce24 by task systemd-udevd/498 [ 117.904601] [ 118.083372] CPU: 4 PID: 498 Comm: systemd-udevd Not tainted 4.20.0-rc3Lyude-Test+ #20 [ 118.091143] Hardware name: amlogic khadas-vim2/khadas-vim2, BIOS 2018.07-rc2-armbian 09/11/2018 [ 118.099768] Call trace: [ 118.102181] dump_backtrace+0x0/0x3e8 [ 118.105796] show_stack+0x14/0x20 [ 118.109083] dump_stack+0x130/0x1c4 [ 118.112539] print_address_description+0x60/0x25c [ 118.117214] kasan_report+0x1b4/0x368 [ 118.120851] __asan_report_load4_noabort+0x18/0x20 [ 118.125566] meson_viu_set_osd_lut+0x7a0/0x890 [ 118.129953] meson_viu_init+0x10c/0x290 [ 118.133741] meson_drv_bind_master+0x474/0x748 [ 118.138141] meson_drv_bind+0x10/0x18 [ 118.141760] try_to_bring_up_master+0x3d8/0x768 [ 118.146249] component_add+0x214/0x570 [ 118.149978] meson_dw_hdmi_probe+0x18/0x20 [meson_dw_hdmi] [ 118.155404] platform_drv_probe+0x98/0x138 [ 118.159455] really_probe+0x2a0/0xa70 [ 118.163070] driver_probe_device+0x1b4/0x2d8 [ 118.167299] __driver_attach+0x200/0x280 [ 118.171189] bus_for_each_dev+0x10c/0x1a8 [ 118.175144] driver_attach+0x38/0x50 [ 118.178681] bus_add_driver+0x330/0x608 [ 118.182471] driver_register+0x140/0x388 [ 118.186361] __platform_driver_register+0xc8/0x108 [ 118.191117] meson_dw_hdmi_platform_driver_init+0x1c/0x1000 [meson_dw_hdmi] [ 118.198022] do_one_initcall+0x12c/0x3bc [ 118.201883] do_init_module+0x1fc/0x638 [ 118.205673] load_module+0x4b4c/0x6808 [ 118.209387] __se_sys_init_module+0x2e8/0x3c0 [ 118.213699] __arm64_sys_init_module+0x68/0x98 [ 118.218100] el0_svc_common+0x104/0x210 [ 118.221893] el0_svc_handler+0x48/0xb8 [ 118.225594] el0_svc+0x8/0xc [ 118.228429] [ 118.229887] The buggy address belongs to the variable: [ 118.235007] eotf_33_linear_mapping+0x84/0xc0 [ 118.239301] [ 118.240752] Memory state around the buggy address: [ 118.245522] ffff20000a63cd00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 118.252695] ffff20000a63cd80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 118.259850] >ffff20000a63ce00: 00 00 00 00 04 fa fa fa fa fa fa fa 00 00 00 00 [ 118.267000] ^ [ 118.271222] ffff20000a63ce80: 00 fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00 [ 118.278393] ffff20000a63cf00: 00 00 00 00 00 00 00 00 00 00 00 00 04 fa fa fa [ 118.285542] ================================================================== [ 118.292699] Disabling lock debugging due to kernel taint It seems that when looping through the OSD EOTF LUT maps, we use the same max iterator for OETF: 20. This is wrong though, since 20*2 is 40, which means that we'll stop out of bounds on the EOTF maps. But, this whole thing is already confusing enough to read through as-is, so let's just replace all of the hardcoded sizes with OSD_(OETF/EOTF)_LUT_SIZE / 2. Signed-off-by: Lyude Paul <[email protected]> Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller") Cc: Neil Armstrong <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: Carlo Caione <[email protected]> Cc: Kevin Hilman <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: <[email protected]> # v4.10+ Acked-by: Neil Armstrong <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sean Paul <[email protected]>
2018-11-26drm/meson: Enable fast_io in meson_dw_hdmi_regmap_configLyude Paul1-0/+1
Seeing as we use this registermap in the context of our IRQ handlers, we need to be using spinlocks for reading/writing registers so that we can still read them from IRQ handlers without having to grab any mutexes and accidentally sleep. We don't currently do this, as pointed out by lockdep: [ 18.403770] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908 [ 18.406744] in_atomic(): 1, irqs_disabled(): 128, pid: 68, name: kworker/u17:0 [ 18.413864] INFO: lockdep is turned off. [ 18.417675] irq event stamp: 12 [ 18.420778] hardirqs last enabled at (11): [<ffff000008a4f57c>] _raw_spin_unlock_irq+0x2c/0x60 [ 18.429510] hardirqs last disabled at (12): [<ffff000008a48914>] __schedule+0xc4/0xa60 [ 18.437345] softirqs last enabled at (0): [<ffff0000080b55e0>] copy_process.isra.4.part.5+0x4d8/0x1c50 [ 18.446684] softirqs last disabled at (0): [<0000000000000000>] (null) [ 18.453979] CPU: 0 PID: 68 Comm: kworker/u17:0 Tainted: G W O 4.20.0-rc3Lyude-Test+ #9 [ 18.469839] Hardware name: amlogic khadas-vim2/khadas-vim2, BIOS 2018.07-rc2-armbian 09/11/2018 [ 18.480037] Workqueue: hci0 hci_power_on [bluetooth] [ 18.487138] Call trace: [ 18.494192] dump_backtrace+0x0/0x1b8 [ 18.501280] show_stack+0x14/0x20 [ 18.508361] dump_stack+0xbc/0xf4 [ 18.515427] ___might_sleep+0x140/0x1d8 [ 18.522515] __might_sleep+0x50/0x88 [ 18.529582] __mutex_lock+0x60/0x870 [ 18.536621] mutex_lock_nested+0x1c/0x28 [ 18.543660] regmap_lock_mutex+0x10/0x18 [ 18.550696] regmap_read+0x38/0x70 [ 18.557727] dw_hdmi_hardirq+0x58/0x138 [dw_hdmi] [ 18.564804] __handle_irq_event_percpu+0xac/0x410 [ 18.571891] handle_irq_event_percpu+0x34/0x88 [ 18.578982] handle_irq_event+0x48/0x78 [ 18.586051] handle_fasteoi_irq+0xac/0x160 [ 18.593061] generic_handle_irq+0x24/0x38 [ 18.599989] __handle_domain_irq+0x60/0xb8 [ 18.606857] gic_handle_irq+0x50/0xa0 [ 18.613659] el1_irq+0xb4/0x130 [ 18.620394] debug_lockdep_rcu_enabled+0x2c/0x30 [ 18.627111] schedule+0x38/0xa0 [ 18.633781] schedule_timeout+0x3a8/0x510 [ 18.640389] wait_for_common+0x15c/0x180 [ 18.646905] wait_for_completion+0x14/0x20 [ 18.653319] mmc_wait_for_req_done+0x28/0x168 [ 18.659693] mmc_wait_for_req+0xa8/0xe8 [ 18.665978] mmc_wait_for_cmd+0x64/0x98 [ 18.672180] mmc_io_rw_direct_host+0x94/0x130 [ 18.678385] mmc_io_rw_direct+0x10/0x18 [ 18.684516] sdio_enable_func+0xe8/0x1d0 [ 18.690627] btsdio_open+0x24/0xc0 [btsdio] [ 18.696821] hci_dev_do_open+0x64/0x598 [bluetooth] [ 18.703025] hci_power_on+0x50/0x270 [bluetooth] [ 18.709163] process_one_work+0x2a0/0x6e0 [ 18.715252] worker_thread+0x40/0x448 [ 18.721310] kthread+0x12c/0x130 [ 18.727326] ret_from_fork+0x10/0x1c [ 18.735555] ------------[ cut here ]------------ [ 18.741430] do not call blocking ops when !TASK_RUNNING; state=2 set at [<000000006265ec59>] wait_for_common+0x140/0x180 [ 18.752417] WARNING: CPU: 0 PID: 68 at kernel/sched/core.c:6096 __might_sleep+0x7c/0x88 [ 18.760553] Modules linked in: dm_mirror dm_region_hash dm_log dm_mod btsdio bluetooth snd_soc_hdmi_codec dw_hdmi_i2s_audio ecdh_generic brcmfmac brcmutil cfg80211 rfkill ir_nec_decoder meson_dw_hdmi(O) dw_hdmi rc_geekbox meson_rng meson_ir ao_cec rng_core rc_core cec leds_pwm efivars nfsd ip_tables x_tables crc32_generic f2fs uas meson_gxbb_wdt pwm_meson efivarfs ipv6 [ 18.799469] CPU: 0 PID: 68 Comm: kworker/u17:0 Tainted: G W O 4.20.0-rc3Lyude-Test+ #9 [ 18.808858] Hardware name: amlogic khadas-vim2/khadas-vim2, BIOS 2018.07-rc2-armbian 09/11/2018 [ 18.818045] Workqueue: hci0 hci_power_on [bluetooth] [ 18.824088] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 18.829891] pc : __might_sleep+0x7c/0x88 [ 18.835722] lr : __might_sleep+0x7c/0x88 [ 18.841256] sp : ffff000008003cb0 [ 18.846751] x29: ffff000008003cb0 x28: 0000000000000000 [ 18.852269] x27: ffff00000938e000 x26: ffff800010283000 [ 18.857726] x25: ffff800010353280 x24: ffff00000868ef50 [ 18.863166] x23: 0000000000000000 x22: 0000000000000000 [ 18.868551] x21: 0000000000000000 x20: 000000000000038c [ 18.873850] x19: ffff000008cd08c0 x18: 0000000000000010 [ 18.879081] x17: ffff000008a68cb0 x16: 0000000000000000 [ 18.884197] x15: 0000000000aaaaaa x14: 0e200e200e200e20 [ 18.889239] x13: 0000000000000001 x12: 00000000ffffffff [ 18.894261] x11: ffff000008adfa48 x10: 0000000000000001 [ 18.899517] x9 : ffff0000092a0158 x8 : 0000000000000000 [ 18.904674] x7 : ffff00000812136c x6 : 0000000000000000 [ 18.909895] x5 : 0000000000000000 x4 : 0000000000000001 [ 18.915080] x3 : 0000000000000007 x2 : 0000000000000007 [ 18.920269] x1 : 99ab8e9ebb6c8500 x0 : 0000000000000000 [ 18.925443] Call trace: [ 18.929904] __might_sleep+0x7c/0x88 [ 18.934311] __mutex_lock+0x60/0x870 [ 18.938687] mutex_lock_nested+0x1c/0x28 [ 18.943076] regmap_lock_mutex+0x10/0x18 [ 18.947453] regmap_read+0x38/0x70 [ 18.951842] dw_hdmi_hardirq+0x58/0x138 [dw_hdmi] [ 18.956269] __handle_irq_event_percpu+0xac/0x410 [ 18.960712] handle_irq_event_percpu+0x34/0x88 [ 18.965176] handle_irq_event+0x48/0x78 [ 18.969612] handle_fasteoi_irq+0xac/0x160 [ 18.974058] generic_handle_irq+0x24/0x38 [ 18.978501] __handle_domain_irq+0x60/0xb8 [ 18.982938] gic_handle_irq+0x50/0xa0 [ 18.987351] el1_irq+0xb4/0x130 [ 18.991734] debug_lockdep_rcu_enabled+0x2c/0x30 [ 18.996180] schedule+0x38/0xa0 [ 19.000609] schedule_timeout+0x3a8/0x510 [ 19.005064] wait_for_common+0x15c/0x180 [ 19.009513] wait_for_completion+0x14/0x20 [ 19.013951] mmc_wait_for_req_done+0x28/0x168 [ 19.018402] mmc_wait_for_req+0xa8/0xe8 [ 19.022809] mmc_wait_for_cmd+0x64/0x98 [ 19.027177] mmc_io_rw_direct_host+0x94/0x130 [ 19.031563] mmc_io_rw_direct+0x10/0x18 [ 19.035922] sdio_enable_func+0xe8/0x1d0 [ 19.040294] btsdio_open+0x24/0xc0 [btsdio] [ 19.044742] hci_dev_do_open+0x64/0x598 [bluetooth] [ 19.049228] hci_power_on+0x50/0x270 [bluetooth] [ 19.053687] process_one_work+0x2a0/0x6e0 [ 19.058143] worker_thread+0x40/0x448 [ 19.062608] kthread+0x12c/0x130 [ 19.067064] ret_from_fork+0x10/0x1c [ 19.071513] irq event stamp: 12 [ 19.075937] hardirqs last enabled at (11): [<ffff000008a4f57c>] _raw_spin_unlock_irq+0x2c/0x60 [ 19.083560] hardirqs last disabled at (12): [<ffff000008a48914>] __schedule+0xc4/0xa60 [ 19.091401] softirqs last enabled at (0): [<ffff0000080b55e0>] copy_process.isra.4.part.5+0x4d8/0x1c50 [ 19.100801] softirqs last disabled at (0): [<0000000000000000>] (null) [ 19.108135] ---[ end trace 38c4920787b88c75 ]--- So, fix this by enabling the fast_io option in our regmap config so that regmap uses spinlocks for locking instead of mutexes. Signed-off-by: Lyude Paul <[email protected]> Fixes: 3f68be7d8e96 ("drm/meson: Add support for HDMI encoder and DW-HDMI bridge + PHY") Cc: Daniel Vetter <[email protected]> Cc: Neil Armstrong <[email protected]> Cc: Carlo Caione <[email protected]> Cc: Kevin Hilman <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: <[email protected]> # v4.12+ Acked-by: Neil Armstrong <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sean Paul <[email protected]>
2018-11-26drm/meson: Fixes for drm_crtc_vblank_on/off supportNeil Armstrong2-2/+28
Since Linux 4.17, calls to drm_crtc_vblank_on/off are mandatory, and we get a warning when ctrc is disabled : " driver forgot to call drm_crtc_vblank_off()" But, the vsync IRQ was not totally disabled due the transient hardware state and specific interrupt line, thus adding proper IRQ masking from the HHI system control registers. The last change fixes a race condition introduced by calling the added drm_crtc_vblank_on/off when an HPD event occurs from the HDMI connector, triggering a WARN_ON() in the _atomic_begin() callback when the CRTC is disabled, thus also triggering a WARN_ON() in drm_vblank_put() : WARNING: CPU: 0 PID: 1185 at drivers/gpu/drm/meson/meson_crtc.c:157 meson_crtc_atomic_begin+0x78/0x80 [...] Call trace: meson_crtc_atomic_begin+0x78/0x80 drm_atomic_helper_commit_planes+0x140/0x218 drm_atomic_helper_commit_tail+0x38/0x80 commit_tail+0x7c/0x80 drm_atomic_helper_commit+0xdc/0x150 drm_atomic_commit+0x54/0x60 restore_fbdev_mode_atomic+0x198/0x238 restore_fbdev_mode+0x6c/0x1c0 drm_fb_helper_restore_fbdev_mode_unlocked+0x7c/0xf0 drm_fb_helper_set_par+0x34/0x60 drm_fb_helper_hotplug_event.part.28+0xb8/0xc8 drm_fbdev_client_hotplug+0xa4/0xe0 drm_client_dev_hotplug+0x90/0xe0 drm_kms_helper_hotplug_event+0x3c/0x48 drm_helper_hpd_irq_event+0x134/0x168 dw_hdmi_top_thread_irq+0x3c/0x50 [...] WARNING: CPU: 0 PID: 1185 at drivers/gpu/drm/drm_vblank.c:1026 drm_vblank_put+0xb4/0xc8 [...] Call trace: drm_vblank_put+0xb4/0xc8 drm_crtc_vblank_put+0x24/0x30 drm_atomic_helper_wait_for_vblanks.part.9+0x130/0x2b8 drm_atomic_helper_commit_tail+0x68/0x80 [...] The issue is that vblank need to be enabled in any occurrence of : - atomic_enable() - atomic_begin() and state->enable == true, which was not the case Moving the CRTC enable code to a common function and calling in one of these occurrence solves this race condition and makes sure vblank is enabled in each call to _atomic_begin() from the HPD event leading to drm_atomic_helper_commit_planes(). To Summarize : - Make sure that the CRTC code will call the drm_crtc_vblank_on()/off() - *Really* mask the Vsync IRQ - Initialize and enable vblank at the first atomic_begin()/_atomic_enable() Cc: [email protected] # 4.17+ Signed-off-by: Neil Armstrong <[email protected]> Reviewed-by: Lyude Paul <[email protected]> [fixed typos+added cc for stable] Signed-off-by: Lyude Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sean Paul <[email protected]>
2018-11-26drm: set is_master to 0 upon drm_new_set_master() failureSergio Correia1-0/+2
When drm_new_set_master() fails, set is_master to 0, to prevent a possible NULL pointer deref. Here is a problematic flow: we check is_master in drm_is_current_master(), then proceed to call drm_lease_owner() passing master. If we do not restore is_master status when drm_new_set_master() fails, we may have a situation in which is_master will be 1 and master itself, NULL, leading to the deref of a NULL pointer in drm_lease_owner(). This fixes the following OOPS, observed on an ArchLinux running a 4.19.2 kernel: [ 97.804282] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 [ 97.807224] PGD 0 P4D 0 [ 97.807224] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 97.807224] CPU: 0 PID: 1348 Comm: xfwm4 Tainted: P OE 4.19.2-arch1-1-ARCH #1 [ 97.807224] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./AB350 Pro4, BIOS P5.10 10/16/2018 [ 97.807224] RIP: 0010:drm_lease_owner+0xd/0x20 [drm] [ 97.807224] Code: 83 c4 18 5b 5d c3 b8 ea ff ff ff eb e2 b8 ed ff ff ff eb db e8 b4 ca 68 fb 0f 1f 40 00 0f 1f 44 00 00 48 89 f8 eb 03 48 89 d0 <48> 8b 90 80 00 00 00 48 85 d2 75 f1 c3 66 0f 1f 44 00 00 0f 1f 44 [ 97.807224] RSP: 0018:ffffb8cf08e07bb0 EFLAGS: 00010202 [ 97.807224] RAX: 0000000000000000 RBX: ffff9cf0f2586c00 RCX: ffff9cf0f2586c88 [ 97.807224] RDX: ffff9cf0ddbd8000 RSI: 0000000000000000 RDI: 0000000000000000 [ 97.807224] RBP: ffff9cf1040e9800 R08: 0000000000000000 R09: 0000000000000000 [ 97.807224] R10: ffffdeb30fd5d680 R11: ffffdeb30f5d6808 R12: ffff9cf1040e9888 [ 97.807224] R13: 0000000000000000 R14: dead000000000200 R15: ffff9cf0f2586cc8 [ 97.807224] FS: 00007f4145513180(0000) GS:ffff9cf10ea00000(0000) knlGS:0000000000000000 [ 97.807224] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 97.807224] CR2: 0000000000000080 CR3: 00000003d7548000 CR4: 00000000003406f0 [ 97.807224] Call Trace: [ 97.807224] drm_is_current_master+0x1a/0x30 [drm] [ 97.807224] drm_master_release+0x3e/0x130 [drm] [ 97.807224] drm_file_free.part.0+0x2be/0x2d0 [drm] [ 97.807224] drm_open+0x1ba/0x1e0 [drm] [ 97.807224] drm_stub_open+0xaf/0xe0 [drm] [ 97.807224] chrdev_open+0xa3/0x1b0 [ 97.807224] ? cdev_put.part.0+0x20/0x20 [ 97.807224] do_dentry_open+0x132/0x340 [ 97.807224] path_openat+0x2d1/0x14e0 [ 97.807224] ? mem_cgroup_commit_charge+0x7a/0x520 [ 97.807224] do_filp_open+0x93/0x100 [ 97.807224] ? __check_object_size+0x102/0x189 [ 97.807224] ? _raw_spin_unlock+0x16/0x30 [ 97.807224] do_sys_open+0x186/0x210 [ 97.807224] do_syscall_64+0x5b/0x170 [ 97.807224] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 97.807224] RIP: 0033:0x7f4147b07976 [ 97.807224] Code: 89 54 24 08 e8 7b f4 ff ff 8b 74 24 0c 48 8b 3c 24 41 89 c0 44 8b 54 24 08 b8 01 01 00 00 89 f2 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff 77 30 44 89 c7 89 44 24 08 e8 a6 f4 ff ff 8b 44 [ 97.807224] RSP: 002b:00007ffcced96ca0 EFLAGS: 00000293 ORIG_RAX: 0000000000000101 [ 97.807224] RAX: ffffffffffffffda RBX: 00005619d5037f80 RCX: 00007f4147b07976 [ 97.807224] RDX: 0000000000000002 RSI: 00005619d46b969c RDI: 00000000ffffff9c [ 98.040039] RBP: 0000000000000024 R08: 0000000000000000 R09: 0000000000000000 [ 98.040039] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000024 [ 98.040039] R13: 0000000000000012 R14: 00005619d5035950 R15: 0000000000000012 [ 98.040039] Modules linked in: nct6775 hwmon_vid algif_skcipher af_alg nls_iso8859_1 nls_cp437 vfat fat uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common arc4 videodev media snd_usb_audio snd_hda_codec_hdmi snd_usbmidi_lib snd_rawmidi snd_seq_device mousedev input_leds iwlmvm mac80211 snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec edac_mce_amd kvm_amd snd_hda_core kvm iwlwifi snd_hwdep r8169 wmi_bmof cfg80211 snd_pcm irqbypass snd_timer snd libphy soundcore pinctrl_amd rfkill pcspkr sp5100_tco evdev gpio_amdpt k10temp mac_hid i2c_piix4 wmi pcc_cpufreq acpi_cpufreq vboxnetflt(OE) vboxnetadp(OE) vboxpci(OE) vboxdrv(OE) msr sg crypto_user ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 fscrypto uas usb_storage dm_crypt hid_generic usbhid hid [ 98.040039] dm_mod raid1 md_mod sd_mod crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel pcbc ahci libahci aesni_intel aes_x86_64 libata crypto_simd cryptd glue_helper ccp xhci_pci rng_core scsi_mod xhci_hcd nvidia_drm(POE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm agpgart nvidia_uvm(POE) nvidia_modeset(POE) nvidia(POE) ipmi_devintf ipmi_msghandler [ 98.040039] CR2: 0000000000000080 [ 98.040039] ---[ end trace 3b65093b6fe62b2f ]--- [ 98.040039] RIP: 0010:drm_lease_owner+0xd/0x20 [drm] [ 98.040039] Code: 83 c4 18 5b 5d c3 b8 ea ff ff ff eb e2 b8 ed ff ff ff eb db e8 b4 ca 68 fb 0f 1f 40 00 0f 1f 44 00 00 48 89 f8 eb 03 48 89 d0 <48> 8b 90 80 00 00 00 48 85 d2 75 f1 c3 66 0f 1f 44 00 00 0f 1f 44 [ 98.040039] RSP: 0018:ffffb8cf08e07bb0 EFLAGS: 00010202 [ 98.040039] RAX: 0000000000000000 RBX: ffff9cf0f2586c00 RCX: ffff9cf0f2586c88 [ 98.040039] RDX: ffff9cf0ddbd8000 RSI: 0000000000000000 RDI: 0000000000000000 [ 98.040039] RBP: ffff9cf1040e9800 R08: 0000000000000000 R09: 0000000000000000 [ 98.040039] R10: ffffdeb30fd5d680 R11: ffffdeb30f5d6808 R12: ffff9cf1040e9888 [ 98.040039] R13: 0000000000000000 R14: dead000000000200 R15: ffff9cf0f2586cc8 [ 98.040039] FS: 00007f4145513180(0000) GS:ffff9cf10ea00000(0000) knlGS:0000000000000000 [ 98.040039] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 98.040039] CR2: 0000000000000080 CR3: 00000003d7548000 CR4: 00000000003406f0 Signed-off-by: Sergio Correia <[email protected]> Cc: [email protected] Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sean Paul <[email protected]>
2018-11-26drm/dp_mst: Skip validating ports during destruction, just refLyude Paul1-2/+13
Jerry Zuo pointed out a rather obscure hotplugging issue that it seems I accidentally introduced into DRM two years ago. Pretend we have a topology like this: |- DP-1: mst_primary |- DP-4: active display |- DP-5: disconnected |- DP-6: active hub |- DP-7: active display |- DP-8: disconnected |- DP-9: disconnected If we unplug DP-6, the topology starting at DP-7 will be destroyed but it's payloads will live on in DP-1's VCPI allocations and thus require removal. However, this removal currently fails because drm_dp_update_payload_part1() will (rightly so) try to validate the port before accessing it, fail then abort. If we keep going, eventually we run the MST hub out of bandwidth and all new allocations will start to fail (or in my case; all new displays just start flickering a ton). We could just teach drm_dp_update_payload_part1() not to drop the port ref in this case, but then we also need to teach drm_dp_destroy_payload_step1() to do the same thing, then hope no one ever adds anything to the that requires a validated port reference in drm_dp_destroy_connector_work(). Kind of sketchy. So let's go with a more clever solution: any port that drm_dp_destroy_connector_work() interacts with is guaranteed to still exist in memory until we say so. While said port might not be valid we don't really care: that's the whole reason we're destroying it in the first place! So, teach drm_dp_get_validated_port_ref() to use the all mighty current_work() function to avoid attempting to validate ports from the context of mgr->destroy_connector_work. I can't see any situation where this wouldn't be safe, and this avoids having to play whack-a-mole in the future of trying to work around port validation. Signed-off-by: Lyude Paul <[email protected]> Fixes: 263efde31f97 ("drm/dp/mst: Get validated port ref in drm_dp_update_payload_part1()") Reported-by: Jerry Zuo <[email protected]> Cc: Jerry Zuo <[email protected]> Cc: Harry Wentland <[email protected]> Cc: <[email protected]> # v4.6+ Reviewed-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sean Paul <[email protected]>
2018-11-26thunderbolt: Prevent root port runtime suspend during NVM upgradeMika Westerberg1-2/+38
During NVM upgrade process the host router is hot-removed for a short while. During this time it is possible that the root port is moved into D3cold which would be fine if the root port could trigger PME on itself. However, many systems actually do not implement it so what happens is that the root port goes into D3cold and never wakes up unless userspace does PCI config space access, such as running 'lscpi'. For this reason we explicitly prevent the root port from runtime suspending during NVM upgrade. Signed-off-by: Mika Westerberg <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-11-26Drivers: hv: vmbus: check the creation_status in vmbus_establish_gpadl()Dexuan Cui1-0/+8
This is a longstanding issue: if the vmbus upper-layer drivers try to consume too many GPADLs, the host may return with an error 0xC0000044 (STATUS_QUOTA_EXCEEDED), but currently we forget to check the creation_status, and hence we can pass an invalid GPADL handle into the OPEN_CHANNEL message, and get an error code 0xc0000225 in open_info->response.open_result.status, and finally we hang in vmbus_open() -> "goto error_free_info" -> vmbus_teardown_gpadl(). With this patch, we can exit gracefully on STATUS_QUOTA_EXCEEDED. Cc: Stephen Hemminger <[email protected]> Cc: K. Y. Srinivasan <[email protected]> Cc: Haiyang Zhang <[email protected]> Cc: [email protected] Signed-off-by: Dexuan Cui <[email protected]> Signed-off-by: K. Y. Srinivasan <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-11-26binder: fix race that allows malicious free of live bufferTodd Kjos3-21/+19
Malicious code can attempt to free buffers using the BC_FREE_BUFFER ioctl to binder. There are protections against a user freeing a buffer while in use by the kernel, however there was a window where BC_FREE_BUFFER could be used to free a recently allocated buffer that was not completely initialized. This resulted in a use-after-free detected by KASAN with a malicious test program. This window is closed by setting the buffer's allow_user_free attribute to 0 when the buffer is allocated or when the user has previously freed it instead of waiting for the caller to set it. The problem was that when the struct buffer was recycled, allow_user_free was stale and set to 1 allowing a free to go through. Signed-off-by: Todd Kjos <[email protected]> Acked-by: Arve Hjønnevåg <[email protected]> Cc: stable <[email protected]> # 4.14 Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-11-26Merge tag 'hwmon-for-v4.20-rc5' of ↵Linus Torvalds4-11/+5
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - fix temp4_type attribute permissions in w83795 driver - fix tacho fault detection in mlxreg-fan driver - fix current value calculations in ina2xx driver - fix initial notification/warning in raspberrypi driver - fix a NULL pointer access in ina2xx * tag 'hwmon-for-v4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (w83795) temp4_type has writable permission hwmon: (mlxreg-fan) Fix macros for tacho fault reading hwmon: (ina2xx) Fix current value calculation hwmon: (raspberrypi) Fix initial notify hwmon (ina2xx) Fix NULL id pointer in probe()
2018-11-26gpio: davinci: restore a way to manually specify the GPIO baseBartosz Golaszewski1-1/+1
Commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") broke the network support in legacy boot mode for da850-evm since we can no longer request the MDIO clock GPIO. Other boards may be broken too, which I haven't tested. The problem is in the fact that most board files still use the legacy GPIO API where lines are requested by numbers rather than descriptors. While this should be fixed eventually, in order to unbreak the board for now - provide a way to manually specify the GPIO base in platform data. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: [email protected] Signed-off-by: Bartosz Golaszewski <[email protected]> Acked-by: Linus Walleij <[email protected]> Signed-off-by: Sekhar Nori <[email protected]>
2018-11-26USB: omap_udc: fix rejection of out transfers when DMA is usedAaro Koskinen1-0/+1
Commit 387f869d2579 ("usb: gadget: u_ether: conditionally align transfer size") started aligning transfer size only if requested, breaking omap_udc DMA mode. Set quirk_ep_out_aligned_size to restore the old behaviour. Fixes: 387f869d2579 ("usb: gadget: u_ether: conditionally align transfer size") Signed-off-by: Aaro Koskinen <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2018-11-26USB: omap_udc: fix USB gadget functionality on Palm Tungsten EAaro Koskinen1-0/+1
On Palm TE nothing happens when you try to use gadget drivers and plug the USB cable. Fix by adding the board to the vbus sense quirk list. Signed-off-by: Aaro Koskinen <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2018-11-26USB: omap_udc: fix omap_udc_start() on 15xx machinesAaro Koskinen1-1/+2
On OMAP 15xx machines there are no transceivers, and omap_udc_start() always fails as it forgot to adjust the default return value. Signed-off-by: Aaro Koskinen <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2018-11-26USB: omap_udc: fix crashes on probe error and module removalAaro Koskinen1-31/+19
We currently crash if usb_add_gadget_udc_release() fails, since the udc->done is not initialized until in the remove function. Furthermore, on module removal the udc data is accessed although the release function is already triggered by usb_del_gadget_udc() early in the function. Fix by rewriting the release and remove functions, basically moving all the cleanup into the release function, and doing the completion only in the module removal case. The patch fixes omap_udc module probe with a failing gadged, and also allows the removal of omap_udc. Tested by running "modprobe omap_udc; modprobe -r omap_udc" in a loop. Signed-off-by: Aaro Koskinen <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2018-11-26USB: omap_udc: use devm_request_irq()Aaro Koskinen1-27/+10
The current code fails to release the third irq on the error path (observed by reading the code), and we get also multiple WARNs with failing gadget drivers due to duplicate IRQ releases. Fix by using devm_request_irq(). Signed-off-by: Aaro Koskinen <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2018-11-26Merge tag 'gvt-fixes-2018-11-26' of https://github.com/intel/gvt-linux into ↵Joonas Lahtinen3-3/+8
drm-intel-fixes gvt-fixes-2018-11-26 - Fix engine check for correct MOCS regs load (Xinyun) - Fix rpm locking for vGPU ggtt init (Henry) - Fix use-after-free when destroy partial ggtt entries (Chris) Signed-off-by: Joonas Lahtinen <[email protected]> From: Zhenyu Wang <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-26Merge branch 'opp/fixes-for-4.20' of ↵Rafael J. Wysocki2-5/+2
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull operating performance points (OPP) framework fixes for 4.20-rc5 from Viresh Kumar. * 'opp/fixes-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: OPP: Fix parsing of multiple phandles in "operating-points-v2" property opp: ti-opp-supply: Fix platform_no_drv_owner.cocci warnings
2018-11-26drm: rcar-du: Fix DU3 start/stop on M3-NLaurent Pinchart1-3/+18
Group start/stop is controlled by the DRES and DEN bits of DSYSR0 for the first group and DSYSR2 for the second group. On most DU instances, this maps to the first CRTC of the group. On M3-N, however, DU2 doesn't exist, but DSYSR2 does. There is no CRTC object there that maps to the correct DSYSR register. Commit 9144adc5e5a9 ("drm: rcar-du: Cache DSYSR value to ensure known initial value") switched group start/stop from using group read/write access to DSYSR to a CRTC-based API to cache the DSYSR value. While doing so, it introduced a regression on M3-N by accessing DSYSR3 instead of DSYSR2 to start/stop the second group. To fix this, access the DSYSR register directly through group read/write if the SoC is missing the first DU channel of the group. Keep using the rcar_du_crtc_dsysr_clr_set() function otherwise, to retain the DSYSR caching feature. Fixes: 9144adc5e5a9 ("drm: rcar-du: Cache DSYSR value to ensure known initial value") Reported-by: Hoan Nguyen An <[email protected]> Signed-off-by: Laurent Pinchart <[email protected]> Acked-by: Kieran Bingham <[email protected]> Tested-by: Simon Horman <[email protected]>
2018-11-26usb: core: quirks: add RESET_RESUME quirk for Cherry G230 Stream seriesMichael Niewöhner1-0/+3
Cherry G230 Stream 2.0 (G85-231) and 3.0 (G85-232) need this quirk to function correctly. This fixes a but where double pressing numlock locks up the device completely with need to replug the keyboard. Signed-off-by: Michael Niewöhner <[email protected]> Tested-by: Michael Niewöhner <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-11-26USB: usb-storage: Add new IDs to ums-realtekKai-Heng Feng1-0/+10
There are two new Realtek card readers require ums-realtek to work correctly. Add the new IDs to support them. Signed-off-by: Kai-Heng Feng <[email protected]> Acked-by: Alan Stern <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-11-26Merge tag 'phy-for-4.20-rc' of ↵Greg Kroah-Hartman2-10/+13
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus Kishon writes: phy: for 4.20-rc *) Fix updating HSTX_TRIM tuning parameter in qcom-qusb2 PHY driver *) Fix inconsistencies between dt-bindings and the driver *) Add "Depend on HAS_IOMEM" uniphier-pcie to avoid randconfig errors Signed-off-by: Kishon Vijay Abraham I <[email protected]> * tag 'phy-for-4.20-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: phy: qcom-qusb2: Fix HSTX_TRIM tuning with fused value for SDM845 phy: qcom-qusb2: Use HSTX_TRIM fused value as is dt-bindings: phy-qcom-qmp: Fix several mistakes from prior commits phy: uniphier-pcie: Depend on HAS_IOMEM
2018-11-26Revert "usb: dwc3: gadget: skip Set/Clear Halt when invalid"Felipe Balbi1-5/+0
This reverts commit ffb80fc672c3a7b6afd0cefcb1524fb99917b2f3. Turns out that commit is wrong. Host controllers are allowed to use Clear Feature HALT as means to sync data toggle between host and periperal. Cc: <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2018-11-26fsi: fsi-scom.c: Remove duplicate headerBrajeswar Ghosh1-1/+0
Remove linux/cdev.h which is included more than once Signed-off-by: Brajeswar Ghosh <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2018-11-26fsi: master-ast-cf: select GENERIC_ALLOCATORArnd Bergmann1-0/+1
In randconfig builds without CONFIG_GENERIC_ALLOCATOR, this driver fails to link: ERROR: "gen_pool_alloc_algo" [drivers/fsi/fsi-master-ast-cf.ko] undefined! ERROR: "gen_pool_fixed_alloc" [drivers/fsi/fsi-master-ast-cf.ko] undefined! ERROR: "of_gen_pool_get" [drivers/fsi/fsi-master-ast-cf.ko] undefined! ERROR: "gen_pool_free" [drivers/fsi/fsi-master-ast-cf.ko] undefined! Select the dependency as all other users do. Fixes: 6a794a27daca ("fsi: master-ast-cf: Add new FSI master using Aspeed ColdFire") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2018-11-24Merge branch 'for-linus' of ↵Linus Torvalds8-396/+158
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - revert of the high-resolution scrolling feature, as it breaks certain hardware due to incompatibilities between Logitech and Microsoft worlds. Peter Hutterer is working on a fixed implementation. Until that is finished, revert by Benjamin Tissoires. - revert of incorrect strncpy->strlcpy conversion in uhid, from David Herrmann - fix for buggy sendfile() implementation on uhid device node, from Eric Biggers - a few assorted device-ID specific quirks * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: Revert "Input: Add the `REL_WHEEL_HI_RES` event code" Revert "HID: input: Create a utility class for counting scroll events" Revert "HID: logitech: Add function to enable HID++ 1.0 "scrolling acceleration"" Revert "HID: logitech: Enable high-resolution scrolling on Logitech mice" Revert "HID: logitech: Use LDJ_DEVICE macro for existing Logitech mice" Revert "HID: logitech: fix a used uninitialized GCC warning" Revert "HID: input: simplify/fix high-res scroll event handling" HID: Add quirk for Primax PIXART OEM mice HID: i2c-hid: Disable runtime PM for LG touchscreen HID: multitouch: Add pointstick support for Cirque Touchpad HID: steam: remove input device when a hid client is running. Revert "HID: uhid: use strlcpy() instead of strncpy()" HID: uhid: forbid UHID_CREATE under KERNEL_DS or elevated privileges HID: input: Ignore battery reported by Symbol DS4308 HID: Add quirk for Microsoft PIXART OEM mouse
2018-11-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds42-211/+309
Pull networking fixes from David Miller: 1) Need to take mutex in ath9k_add_interface(), from Dan Carpenter. 2) Fix mt76 build without CONFIG_LEDS_CLASS, from Arnd Bergmann. 3) Fix socket wmem accounting in SCTP, from Xin Long. 4) Fix failed resume crash in ena driver, from Arthur Kiyanovski. 5) qed driver passes bytes instead of bits into second arg of bitmap_weight(). From Denis Bolotin. 6) Fix reset deadlock in ibmvnic, from Juliet Kim. 7) skb_scrube_packet() needs to scrub the fwd marks too, from Petr Machata. 8) Make sure older TCP stacks see enough dup ACKs, and avoid doing SACK compression during this period, from Eric Dumazet. 9) Add atomicity to SMC protocol cursor handling, from Ursula Braun. 10) Don't leave dangling error pointer if bpf_prog_add() fails in thunderx driver, from Lorenzo Bianconi. Also, when we unmap TSO headers, set sq->tso_hdrs to NULL. 11) Fix race condition over state variables in act_police, from Davide Caratti. 12) Disable guest csum in the presence of XDP in virtio_net, from Jason Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (64 commits) net: gemini: Fix copy/paste error net: phy: mscc: fix deadlock in vsc85xx_default_config dt-bindings: dsa: Fix typo in "probed" net: thunderx: set tso_hdrs pointer to NULL in nicvf_free_snd_queue net: amd: add missing of_node_put() team: no need to do team_notify_peers or team_mcast_rejoin when disabling port virtio-net: fail XDP set if guest csum is negotiated virtio-net: disable guest csum during XDP set net/sched: act_police: add missing spinlock initialization net: don't keep lonely packets forever in the gro hash net/ipv6: re-do dad when interface has IFF_NOARP flag change packet: copy user buffers before orphan or clone ibmvnic: Update driver queues after change in ring size support ibmvnic: Fix RX queue buffer cleanup net: thunderx: set xdp_prog to NULL if bpf_prog_add fails net/dim: Update DIM start sample after each DIM iteration net: faraday: ftmac100: remove netif_running(netdev) check before disabling interrupts net/smc: use after free fix in smc_wr_tx_put_slot() net/smc: atomic SMCD cursor handling net/smc: add SMC-D shutdown signal ...
2018-11-23net: gemini: Fix copy/paste errorAndreas Fiedler1-1/+1
The TX stats should be started with the tx_stats_syncp, there seems to be a copy/paste error in the driver. Signed-off-by: Andreas Fiedler <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-23net: phy: mscc: fix deadlock in vsc85xx_default_configQuentin Schulz1-9/+5
The vsc85xx_default_config function called in the vsc85xx_config_init function which is used by VSC8530, VSC8531, VSC8540 and VSC8541 PHYs mistakenly calls phy_read and phy_write in-between phy_select_page and phy_restore_page. phy_select_page and phy_restore_page actually take and release the MDIO bus lock and phy_write and phy_read take and release the lock to write or read to a PHY register. Let's fix this deadlock by using phy_modify_paged which handles correctly a read followed by a write in a non-standard page. Fixes: 6a0bfbbe20b0 ("net: phy: mscc: migrate to phy_select/restore_page functions") Signed-off-by: Quentin Schulz <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-23net: thunderx: set tso_hdrs pointer to NULL in nicvf_free_snd_queueLorenzo Bianconi1-1/+3
Reset snd_queue tso_hdrs pointer to NULL in nicvf_free_snd_queue routine since it is used to check if tso dma descriptor queue has been previously allocated. The issue can be triggered with the following reproducer: $ip link set dev enP2p1s0v0 xdpdrv obj xdp_dummy.o $ip link set dev enP2p1s0v0 xdpdrv off [ 341.467649] WARNING: CPU: 74 PID: 2158 at mm/vmalloc.c:1511 __vunmap+0x98/0xe0 [ 341.515010] Hardware name: GIGABYTE H270-T70/MT70-HD0, BIOS T49 02/02/2018 [ 341.521874] pstate: 60400005 (nZCv daif +PAN -UAO) [ 341.526654] pc : __vunmap+0x98/0xe0 [ 341.530132] lr : __vunmap+0x98/0xe0 [ 341.533609] sp : ffff00001c5db860 [ 341.536913] x29: ffff00001c5db860 x28: 0000000000020000 [ 341.542214] x27: ffff810feb5090b0 x26: ffff000017e57000 [ 341.547515] x25: 0000000000000000 x24: 00000000fbd00000 [ 341.552816] x23: 0000000000000000 x22: ffff810feb5090b0 [ 341.558117] x21: 0000000000000000 x20: 0000000000000000 [ 341.563418] x19: ffff000017e57000 x18: 0000000000000000 [ 341.568719] x17: 0000000000000000 x16: 0000000000000000 [ 341.574020] x15: 0000000000000010 x14: ffffffffffffffff [ 341.579321] x13: ffff00008985eb27 x12: ffff00000985eb2f [ 341.584622] x11: ffff0000096b3000 x10: ffff00001c5db510 [ 341.589923] x9 : 00000000ffffffd0 x8 : ffff0000086868e8 [ 341.595224] x7 : 3430303030303030 x6 : 00000000000006ef [ 341.600525] x5 : 00000000003fffff x4 : 0000000000000000 [ 341.605825] x3 : 0000000000000000 x2 : ffffffffffffffff [ 341.611126] x1 : ffff0000096b3728 x0 : 0000000000000038 [ 341.616428] Call trace: [ 341.618866] __vunmap+0x98/0xe0 [ 341.621997] vunmap+0x3c/0x50 [ 341.624961] arch_dma_free+0x68/0xa0 [ 341.628534] dma_direct_free+0x50/0x80 [ 341.632285] nicvf_free_resources+0x160/0x2d8 [nicvf] [ 341.637327] nicvf_config_data_transfer+0x174/0x5e8 [nicvf] [ 341.642890] nicvf_stop+0x298/0x340 [nicvf] [ 341.647066] __dev_close_many+0x9c/0x108 [ 341.650977] dev_close_many+0xa4/0x158 [ 341.654720] rollback_registered_many+0x140/0x530 [ 341.659414] rollback_registered+0x54/0x80 [ 341.663499] unregister_netdevice_queue+0x9c/0xe8 [ 341.668192] unregister_netdev+0x28/0x38 [ 341.672106] nicvf_remove+0xa4/0xa8 [nicvf] [ 341.676280] nicvf_shutdown+0x20/0x30 [nicvf] [ 341.680630] pci_device_shutdown+0x44/0x88 [ 341.684720] device_shutdown+0x144/0x250 [ 341.688640] kernel_restart_prepare+0x44/0x50 [ 341.692986] kernel_restart+0x20/0x68 [ 341.696638] __se_sys_reboot+0x210/0x238 [ 341.700550] __arm64_sys_reboot+0x24/0x30 [ 341.704555] el0_svc_handler+0x94/0x110 [ 341.708382] el0_svc+0x8/0xc [ 341.711252] ---[ end trace 3f4019c8439959c9 ]--- [ 341.715874] page:ffff7e0003ef4000 count:0 mapcount:0 mapping:0000000000000000 index:0x4 [ 341.723872] flags: 0x1fffe000000000() [ 341.727527] raw: 001fffe000000000 ffff7e0003f1a008 ffff7e0003ef4048 0000000000000000 [ 341.735263] raw: 0000000000000004 0000000000000000 00000000ffffffff 0000000000000000 [ 341.742994] page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0) where xdp_dummy.c is a simple bpf program that forwards the incoming frames to the network stack (available here: https://github.com/altoor/xdp_walkthrough_examples/blob/master/sample_1/xdp_dummy.c) Fixes: 05c773f52b96 ("net: thunderx: Add basic XDP support") Fixes: 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller") Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-23net: amd: add missing of_node_put()Yangtao Li1-1/+3
of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. This place doesn't do that, so fix it. Signed-off-by: Yangtao Li <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-23team: no need to do team_notify_peers or team_mcast_rejoin when disabling portHangbin Liu1-2/+0
team_notify_peers() will send ARP and NA to notify peers. team_mcast_rejoin() will send multicast join group message to notify peers. We should do this when enabling/changed to a new port. But it doesn't make sense to do it when a port is disabled. On the other hand, when we set mcast_rejoin_count to 2, and do a failover, team_port_disable() will increase mcast_rejoin.count_pending to 2 and then team_port_enable() will increase mcast_rejoin.count_pending to 4. We will send 4 mcast rejoin messages at latest, which will make user confused. The same with notify_peers.count. Fix it by deleting team_notify_peers() and team_mcast_rejoin() in team_port_disable(). Reported-by: Liang Li <[email protected]> Fixes: fc423ff00df3a ("team: add peer notification") Fixes: 492b200efdd20 ("team: add support for sending multicast rejoins") Signed-off-by: Hangbin Liu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-23RDMA/hns: Bugfix pbl configuration for rereg mrYixian Liu1-68/+60
Current hns driver assigned the first two PBL page addresses from previous registered MR to the hardware when reregister MR changing the memory locations occurred. This will lead to PBL addressing error as the PBL has already been released. This patch fixes this wrong assignment by using the page address from new allocated PBL. Fixes: a2c80b7b4119 ("RDMA/hns: Add rereg mr support for hip08") Signed-off-by: Yixian Liu <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2018-11-23virtio-net: fail XDP set if guest csum is negotiatedJason Wang1-2/+3
We don't support partial csumed packet since its metadata will be lost or incorrect during XDP processing. So fail the XDP set if guest_csum feature is negotiated. Fixes: f600b6905015 ("virtio_net: Add XDP support") Reported-by: Jesper Dangaard Brouer <[email protected]> Cc: Jesper Dangaard Brouer <[email protected]> Cc: Pavel Popa <[email protected]> Cc: David Ahern <[email protected]> Signed-off-by: Jason Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.