aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-10-20net: hns3: add limit ets dwrr bandwidth cannot be 0Guangbin Huang1-0/+9
If ets dwrr bandwidth of tc is set to 0, the hardware will switch to SP mode. In this case, this tc may occupy all the tx bandwidth if it has huge traffic, so it violates the purpose of the user setting. To fix this problem, limit the ets dwrr bandwidth must greater than 0. Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20net: hns3: reset DWRR of unused tc to zeroGuangbin Huang1-0/+2
Currently, DWRR of tc will be initialized to a fixed value when this tc is enabled, but it is not been reset to 0 when this tc is disabled. It cause a problem that the DWRR of unused tc is not 0 after using tc tool to add and delete multi-tc parameters. For examples, after enabling 4 TCs and restoring to 1 TC by follow tc commands: $ tc qdisc add dev eth0 root mqprio num_tc 4 map 0 1 2 3 0 1 2 3 queues \ 8@0 8@8 8@16 8@24 hw 1 mode channel $ tc qdisc del dev eth0 root Now there is just one TC is enabled for eth0, but the tc info querying by debugfs is shown as follow: $ cat /mnt/hns3/0000:7d:00.0/tm/tc_sch_info enabled tc number: 1 weight_offset: 14 TC MODE WEIGHT 0 dwrr 100 1 dwrr 100 2 dwrr 100 3 dwrr 100 4 dwrr 0 5 dwrr 0 6 dwrr 0 7 dwrr 0 This patch fixes it by resetting DWRR of tc to 0 when tc is disabled. Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20net: hns3: Add configuration of TM QCN error eventJiaran Zhang2-1/+6
Add configuration of interrupt type and fifo interrupt enable of TM QCN error event if enabled, otherwise this event will not be reported when there is error. Fixes: d914971df022 ("net: hns3: remove redundant query in hclge_config_tm_hw_err_int()") Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20vrf: Revert "Reset skb conntrack connection..."Eugene Crosser1-4/+0
This reverts commit 09e856d54bda5f288ef8437a90ab2b9b3eab83d1. When an interface is enslaved in a VRF, prerouting conntrack hook is called twice: once in the context of the original input interface, and once in the context of the VRF interface. If no special precausions are taken, this leads to creation of two conntrack entries instead of one, and breaks SNAT. Commit above was intended to avoid creation of extra conntrack entries when input interface is enslaved in a VRF. It did so by resetting conntrack related data associated with the skb when it enters VRF context. However it breaks netfilter operation. Imagine a use case when conntrack zone must be assigned based on the original input interface, rather than VRF interface (that would make original interfaces indistinguishable). One could create netfilter rules similar to these: chain rawprerouting { type filter hook prerouting priority raw; iif realiface1 ct zone set 1 return iif realiface2 ct zone set 2 return } This works before the mentioned commit, but not after: zone assignment is "forgotten", and any subsequent NAT or filtering that is dependent on the conntrack zone does not work. Here is a reproducer script that demonstrates the difference in behaviour. ========== #!/bin/sh # This script demonstrates unexpected change of nftables behaviour # caused by commit 09e856d54bda5f28 ""vrf: Reset skb conntrack # connection on VRF rcv" # https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=09e856d54bda5f288ef8437a90ab2b9b3eab83d1 # # Before the commit, it was possible to assign conntrack zone to a # packet (or mark it for `notracking`) in the prerouting chanin, raw # priority, based on the `iif` (interface from which the packet # arrived). # After the change, # if the interface is enslaved in a VRF, such # assignment is lost. Instead, assignment based on the `iif` matching # the VRF master interface is honored. Thus it is impossible to # distinguish packets based on the original interface. # # This script demonstrates this change of behaviour: conntrack zone 1 # or 2 is assigned depending on the match with the original interface # or the vrf master interface. It can be observed that conntrack entry # appears in different zone in the kernel versions before and after # the commit. IPIN=172.30.30.1 IPOUT=172.30.30.2 PFXL=30 ip li sh vein >/dev/null 2>&1 && ip li del vein ip li sh tvrf >/dev/null 2>&1 && ip li del tvrf nft list table testct >/dev/null 2>&1 && nft delete table testct ip li add vein type veth peer veout ip li add tvrf type vrf table 9876 ip li set veout master tvrf ip li set vein up ip li set veout up ip li set tvrf up /sbin/sysctl -w net.ipv4.conf.veout.accept_local=1 /sbin/sysctl -w net.ipv4.conf.veout.rp_filter=0 ip addr add $IPIN/$PFXL dev vein ip addr add $IPOUT/$PFXL dev veout nft -f - <<__END__ table testct { chain rawpre { type filter hook prerouting priority raw; iif { veout, tvrf } meta nftrace set 1 iif veout ct zone set 1 return iif tvrf ct zone set 2 return notrack } chain rawout { type filter hook output priority raw; notrack } } __END__ uname -rv conntrack -F ping -W 1 -c 1 -I vein $IPOUT conntrack -L Signed-off-by: Eugene Crosser <crosser@average.org> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-19cavium: Fix return values of the probe functionZheyu Ma1-2/+2
During the process of driver probing, the probe function should return < 0 for failure, otherwise, the kernel will treat value > 0 as success. Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-19mISDN: Fix return values of the probe functionZheyu Ma1-4/+4
During the process of driver probing, the probe function should return < 0 for failure, otherwise, the kernel will treat value > 0 as success. Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-18nfp: bpf: silence bitwise vs. logical OR warningNathan Chancellor1-2/+2
A new warning in clang points out two places in this driver where boolean expressions are being used with a bitwise OR instead of a logical one: drivers/net/ethernet/netronome/nfp/nfp_asm.c:199:20: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical] reg->src_lmextn = swreg_lmextn(lreg) | swreg_lmextn(rreg); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ || drivers/net/ethernet/netronome/nfp/nfp_asm.c:199:20: note: cast one or both operands to int to silence this warning drivers/net/ethernet/netronome/nfp/nfp_asm.c:280:20: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical] reg->src_lmextn = swreg_lmextn(lreg) | swreg_lmextn(rreg); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ || drivers/net/ethernet/netronome/nfp/nfp_asm.c:280:20: note: cast one or both operands to int to silence this warning 2 errors generated. The motivation for the warning is that logical operations short circuit while bitwise operations do not. In this case, it does not seem like short circuiting is harmful so implement the suggested fix of changing to a logical operation to fix the warning. Link: https://github.com/ClangBuiltLinux/linux/issues/1479 Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20211018193101.2340261-1-nathan@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-18cavium: Return negative value when pci_alloc_irq_vectors() failsZheyu Ma1-1/+1
During the process of driver probing, the probe function should return < 0 for failure, otherwise, the kernel will treat value > 0 as success. Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-18net: mscc: ocelot: Add of_node_put() before gotoWan Jiabing1-0/+1
Fix following coccicheck warning: ./drivers/net/ethernet/mscc/ocelot_vsc7514.c:946:1-33: WARNING: Function for_each_available_child_of_node should have of_node_put() before goto. Early exits from for_each_available_child_of_node should decrement the node reference counter. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-18net: sparx5: Add of_node_put() before gotoWan Jiabing1-0/+1
Fix following coccicheck warning: ./drivers/net/ethernet/microchip/sparx5/s4parx5_main.c:723:1-33: WARNING: Function for_each_available_child_of_node should have of_node_put() before goto Early exits from for_each_available_child_of_node should decrement the node reference counter. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-18net: dsa: mt7530: correct ds->num_portsDENG Qingfang1-7/+1
Setting ds->num_ports to DSA_MAX_PORTS made DSA core allocate unnecessary dsa_port's and call mt7530_port_disable for non-existent ports. Set it to MT7530_NUM_PORTS to fix that, and dsa_is_user_port check in port_enable/disable is no longer required. Cc: stable@vger.kernel.org Signed-off-by: DENG Qingfang <dqfext@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-18net: dsa: lantiq_gswip: fix register definitionAleksander Jan Bajkowski1-1/+1
I compared the register definitions with the D-Link DWR-966 GPL sources and found that the PUAFD field definition was incorrect. This definition is unused and causes no issues. Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-18Merge tag 'linux-can-fixes-for-5.15-20211017' of ↵David S. Miller4-20/+31
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2021-10-17 this is a pull request of 11 patches for net/master. The first 4 patches are by Ziyang Xuan and Zhang Changzhong and fix 1 use after free and 3 standard conformance problems in the j1939 CAN stack. The next 2 patches are by Ziyang Xuan and fix 2 concurrency problems in the ISOTP CAN stack. Yoshihiro Shimoda's patch for the rcar_can fix suspend/resume on not running CAN interfaces. Aswath Govindraju's patch for the m_can driver fixes access for MMIO devices. Zheyu Ma contributes a patch for the peak_pci driver to fix a use after free. Stephane Grosjean's 2 patches fix CAN error state handling in the peak_usb driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-18hamradio: baycom_epp: fix build for UMLRandy Dunlap1-3/+3
On i386, the baycom_epp driver wants to inspect X86 CPU features (TSC) and then act on that data, but that info is not available when running on UML, so prevent that test and do the default action. Prevents this build error on UML + i386: ../drivers/net/hamradio/baycom_epp.c: In function ‘epp_bh’: ../drivers/net/hamradio/baycom_epp.c:630:6: error: implicit declaration of function ‘boot_cpu_has’; did you mean ‘get_cpu_mask’? [-Werror=implicit-function-declaration] if (boot_cpu_has(X86_FEATURE_TSC)) \ ^ ../drivers/net/hamradio/baycom_epp.c:658:2: note: in expansion of macro ‘GETTICK’ GETTICK(time1); Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: linux-um@lists.infradead.org Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Thomas Sailer <t.sailer@alumni.ethz.ch> Cc: linux-hams@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-17can: peak_usb: pcan_usb_fd_decode_status(): remove unnecessary test on the ↵Stephane Grosjean1-2/+1
nullity of a pointer Since alloc_can_err_skb() puts NULL in cf in the case when skb cannot be allocated and can_change_state() handles the case when cf is NULL, the test on the nullity of skb is now unnecessary. Link: https://lore.kernel.org/all/20210929142111.55757-2-s.grosjean@peak-system.com Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-10-17can: peak_usb: pcan_usb_fd_decode_status(): fix back to ERROR_ACTIVE state ↵Stephane Grosjean1-3/+2
notification This corrects the lack of notification of a return to ERROR_ACTIVE state for USB - CANFD devices from PEAK-System. Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters") Link: https://lore.kernel.org/all/20210929142111.55757-1-s.grosjean@peak-system.com Cc: stable@vger.kernel.org Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-10-17can: peak_pci: peak_pci_remove(): fix UAFZheyu Ma1-5/+4
When remove the module peek_pci, referencing 'chan' again after releasing 'dev' will cause UAF. Fix this by releasing 'dev' later. The following log reveals it: [ 35.961814 ] BUG: KASAN: use-after-free in peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.963414 ] Read of size 8 at addr ffff888136998ee8 by task modprobe/5537 [ 35.965513 ] Call Trace: [ 35.965718 ] dump_stack_lvl+0xa8/0xd1 [ 35.966028 ] print_address_description+0x87/0x3b0 [ 35.966420 ] kasan_report+0x172/0x1c0 [ 35.966725 ] ? peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.967137 ] ? trace_irq_enable_rcuidle+0x10/0x170 [ 35.967529 ] ? peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.967945 ] __asan_report_load8_noabort+0x14/0x20 [ 35.968346 ] peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.968752 ] pci_device_remove+0xa9/0x250 Fixes: e6d9c80b7ca1 ("can: peak_pci: add support of some new PEAK-System PCI cards") Link: https://lore.kernel.org/all/1634192913-15639-1-git-send-email-zheyuma97@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-10-17can: m_can: fix iomap_read_fifo() and iomap_write_fifo()Aswath Govindraju1-2/+12
The read and writes from the fifo are from a buffer, with various fields and data at predefined offsets. So, they should not be done to the same address(or port) in case of val_count greater than 1. Therefore, fix this by using iowrite32()/ioread32() instead of ioread32_rep()/iowrite32_rep(). Also, the write into FIFO must be performed with an offset from the message ram base address. Therefore, fix the base address to mram_base. Fixes: e39381770ec9 ("can: m_can: Disable IRQs on FIFO bus errors") Link: https://lore.kernel.org/all/20210920123344.2320-1-a-govindraju@ti.com Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-10-17can: rcar_can: fix suspend/resumeYoshihiro Shimoda1-8/+12
If the driver was not opened, rcar_can_suspend() should not call clk_disable() because the clock was not enabled. Fixes: fd1159318e55 ("can: add Renesas R-Car CAN driver") Link: https://lore.kernel.org/all/20210924075556.223685-1-yoshihiro.shimoda.uh@renesas.com Cc: stable@vger.kernel.org Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Ayumi Nakamichi <ayumi.nakamichi.kf@renesas.com> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Tested-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-10-15Merge branch '100GbE' of ↵Jakub Kicinski6-4/+32
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-10-14 Brett ensures RDMA nodes are removed during release and rebuild. He also corrects fw.mgmt.api to include the patch number for proper identification. Dave stops ida_free() being called when an IDA has not been allocated. Michal corrects the order of parameters being provided and the number of entries skipped for UDP tunnels. ==================== Link: https://lore.kernel.org/r/20211014181953.3538330-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-15lan78xx: select CRC32Vegard Nossum1-0/+1
Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/net/usb/lan78xx.o: in function `lan78xx_set_multicast': lan78xx.c:(.text+0x48cf): undefined reference to `crc32_le' The actual use of crc32_le() comes indirectly through ether_crc(). Fixes: 55d7de9de6c30 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-15ptp: fix error print of ptp_kvm on X86_64 platformKele Huang1-2/+2
Commit a86ed2cfa13c5 ("ptp: Don't print an error if ptp_kvm is not supported") fixes the error message print on ARM platform by only concerning about the case that the error returned from kvm_arch_ptp_init() is not -EOPNOTSUPP. Although the ARM platform returns -EOPNOTSUPP if ptp_kvm is not supported while X86_64 platform returns -KVM_EOPNOTSUPP, both error codes share the same value 95. Actually kvm_arch_ptp_init() on X86_64 platform can return three kinds of errors (-KVM_ENOSYS, -KVM_EOPNOTSUPP and -KVM_EFAULT). The problem is that -KVM_EOPNOTSUPP is masked out and -KVM_EFAULT is ignored among them. This patch fixes this by returning them to ptp_kvm_init() respectively. Signed-off-by: Kele Huang <huangkele@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-14Merge tag 'net-5.15-rc6' of ↵Linus Torvalds39-221/+523
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Quite calm. The noisy DSA driver (embedded switches) changes, and adjustment to IPv6 IOAM behavior add to diffstat's bottom line but are not scary. Current release - regressions: - af_unix: rename UNIX-DGRAM to UNIX to maintain backwards compatibility - procfs: revert "add seq_puts() statement for dev_mcast", minor format change broke user space Current release - new code bugs: - dsa: fix bridge_num not getting cleared after ports leaving the bridge, resource leak - dsa: tag_dsa: send packets with TX fwd offload from VLAN-unaware bridges using VID 0, prevent packet drops if pvid is removed - dsa: mv88e6xxx: keep the pvid at 0 when VLAN-unaware, prevent HW getting confused about station to VLAN mapping Previous releases - regressions: - virtio-net: fix for skb_over_panic inside big mode - phy: do not shutdown PHYs in READY state - dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY's, fix link LED staying lit after ifdown - mptcp: fix possible infinite wait on recvmsg(MSG_WAITALL) - mqprio: Correct stats in mqprio_dump_class_stats() - ice: fix deadlock for Tx timestamp tracking flush - stmmac: fix feature detection on old hardware Previous releases - always broken: - sctp: account stream padding length for reconf chunk - icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe() - isdn: cpai: check ctr->cnr to avoid array index out of bound - isdn: mISDN: fix sleeping function called from invalid context - nfc: nci: fix potential UAF of rf_conn_info object - dsa: microchip: prevent ksz_mib_read_work from kicking back in after it's canceled in .remove and crashing - dsa: mv88e6xxx: isolate the ATU databases of standalone and bridged ports - dsa: sja1105, ocelot: break circular dependency between switch and tag drivers - dsa: felix: improve timestamping in presence of packe loss - mlxsw: thermal: fix out-of-bounds memory accesses Misc: - ipv6: ioam: move the check for undefined bits to improve interoperability" * tag 'net-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (60 commits) icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe MAINTAINERS: Update the devicetree documentation path of imx fec driver sctp: account stream padding length for reconf chunk mlxsw: thermal: Fix out-of-bounds memory accesses ethernet: s2io: fix setting mac address during resume NFC: digital: fix possible memory leak in digital_in_send_sdd_req() NFC: digital: fix possible memory leak in digital_tg_listen_mdaa() nfc: fix error handling of nfc_proto_register() Revert "net: procfs: add seq_puts() statement for dev_mcast" net: encx24j600: check error in devm_regmap_init_encx24j600 net: korina: select CRC32 net: arc: select CRC32 net: dsa: felix: break at first CPU port during init and teardown net: dsa: tag_ocelot_8021q: fix inability to inject STP BPDUs into BLOCKING ports net: dsa: felix: purge skb from TX timestamping queue if it cannot be sent net: dsa: tag_ocelot_8021q: break circular dependency with ocelot switch lib net: dsa: tag_ocelot: break circular dependency with ocelot switch lib driver net: mscc: ocelot: cross-check the sequence id from the timestamp FIFO with the skb PTP header net: mscc: ocelot: deny TX timestamping of non-PTP packets net: mscc: ocelot: warn when a PTP IRQ is raised for an unknown skb ...
2021-10-14ice: Print the api_patch as part of the fw.mgmt.apiBrett Creeley1-1/+2
Currently when a user uses "devlink dev info", the fw.mgmt.api will be the major.minor numbers as shown below: devlink dev info pci/0000:3b:00.0 pci/0000:3b:00.0: driver ice serial_number 00-01-00-ff-ff-00-00-00 versions: fixed: board.id K91258-000 running: fw.mgmt 6.1.2 fw.mgmt.api 1.7 <--- No patch number included fw.mgmt.build 0xd75e7d06 fw.mgmt.srev 5 fw.undi 1.2992.0 fw.undi.srev 5 fw.psid.api 3.10 fw.bundle_id 0x800085cc fw.app.name ICE OS Default Package fw.app 1.3.27.0 fw.app.bundle_id 0xc0000001 fw.netlist 3.10.2000-3.1e.0 fw.netlist.build 0x2a76e110 stored: fw.mgmt.srev 5 fw.undi 1.2992.0 fw.undi.srev 5 fw.psid.api 3.10 fw.bundle_id 0x800085cc fw.netlist 3.10.2000-3.1e.0 fw.netlist.build 0x2a76e110 There are many features in the driver that depend on the major, minor, and patch version of the FW. Without the patch number in the output for fw.mgmt.api debugging issues related to the FW API version is difficult. Also, using major.minor.patch aligns with the existing firmware version which uses a 3 digit value. Fix this by making the fw.mgmt.api print the major.minor.patch versions. Shown below is the result: devlink dev info pci/0000:3b:00.0 pci/0000:3b:00.0: driver ice serial_number 00-01-00-ff-ff-00-00-00 versions: fixed: board.id K91258-000 running: fw.mgmt 6.1.2 fw.mgmt.api 1.7.9 <--- patch number included fw.mgmt.build 0xd75e7d06 fw.mgmt.srev 5 fw.undi 1.2992.0 fw.undi.srev 5 fw.psid.api 3.10 fw.bundle_id 0x800085cc fw.app.name ICE OS Default Package fw.app 1.3.27.0 fw.app.bundle_id 0xc0000001 fw.netlist 3.10.2000-3.1e.0 fw.netlist.build 0x2a76e110 stored: fw.mgmt.srev 5 fw.undi 1.2992.0 fw.undi.srev 5 fw.psid.api 3.10 fw.bundle_id 0x800085cc fw.netlist 3.10.2000-3.1e.0 fw.netlist.build 0x2a76e110 Fixes: ff2e5c700e08 ("ice: add basic handler for devlink .info_get") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-14ice: fix getting UDP tunnel entryMichal Swiatkowski1-2/+2
Correct parameters order in call to ice_tunnel_idx_to_entry function. Entry in sparse port table is correct when the idx is 0. For idx 1 one correct entry should be skipped, for idx 2 two of them should be skipped etc. Change if condition to be true when idx is 0, which means that previous valid entry of this tunnel type were skipped. Fixes: b20e6c17c468 ("ice: convert to new udp_tunnel infrastructure") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-14ice: Avoid crash from unnecessary IDA freeDave Ertman1-1/+5
In the remove path, there is an attempt to free the aux_idx IDA whether it was allocated or not. This can potentially cause a crash when unloading the driver on systems that do not initialize support for RDMA. But, this free cannot be gated by the status bit for RDMA, since it is allocated if the driver detects support for RDMA at probe time, but the driver can enter into a state where RDMA is not supported after the IDA has been allocated at probe time and this would lead to a memory leak. Initialize aux_idx to an invalid value and check for a valid value when unloading to determine if an IDA free is necessary. Fixes: d25a0fc41c1f9 ("ice: Initialize RDMA support") Reported-by: Jun Miao <jun.miao@windriver.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-14ice: Fix failure to re-add LAN/RDMA Tx queuesBrett Creeley3-0/+23
Currently if the VSI is rebuilt/removed and the RDMA PF driver is active the RDMA Tx queue scheduler node configuration will not be cleaned up. This will cause the rebuild/re-add of the VSI to fail due to the software structures not being correctly cleaned up for the VSI index. Fix this by always calling ice_rm_vsi_rdma_cfg() for all VSI. If there are no RDMA scheduler nodes created, then there is no harm in calling ice_rm_vsi_rdma_cfg(). This change applies to all VSI types, so if RDMA support is added for other VSI types they will also get this change. Fixes: 348048e724a0 ("ice: Implement iidc operations") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Jerzy Wiktor Jurkowski <jerzy.wiktor.jurkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-14mlxsw: thermal: Fix out-of-bounds memory accessesIdo Schimmel1-47/+5
Currently, mlxsw allows cooling states to be set above the maximum cooling state supported by the driver: # cat /sys/class/thermal/thermal_zone2/cdev0/type mlxsw_fan # cat /sys/class/thermal/thermal_zone2/cdev0/max_state 10 # echo 18 > /sys/class/thermal/thermal_zone2/cdev0/cur_state # echo $? 0 This results in out-of-bounds memory accesses when thermal state transition statistics are enabled (CONFIG_THERMAL_STATISTICS=y), as the transition table is accessed with a too large index (state) [1]. According to the thermal maintainer, it is the responsibility of the driver to reject such operations [2]. Therefore, return an error when the state to be set exceeds the maximum cooling state supported by the driver. To avoid dead code, as suggested by the thermal maintainer [3], partially revert commit a421ce088ac8 ("mlxsw: core: Extend cooling device with cooling levels") that tried to interpret these invalid cooling states (above the maximum) in a special way. The cooling levels array is not removed in order to prevent the fans going below 20% PWM, which would cause them to get stuck at 0% PWM. [1] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x271/0x290 Read of size 4 at addr ffff8881052f7bf8 by task kworker/0:0/5 CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.15.0-rc3-custom-45935-gce1adf704b14 #122 Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2FO"/"SA000874", BIOS 4.6.5 03/08/2016 Workqueue: events_freezable_power_ thermal_zone_device_check Call Trace: dump_stack_lvl+0x8b/0xb3 print_address_description.constprop.0+0x1f/0x140 kasan_report.cold+0x7f/0x11b thermal_cooling_device_stats_update+0x271/0x290 __thermal_cdev_update+0x15e/0x4e0 thermal_cdev_update+0x9f/0xe0 step_wise_throttle+0x770/0xee0 thermal_zone_device_update+0x3f6/0xdf0 process_one_work+0xa42/0x1770 worker_thread+0x62f/0x13e0 kthread+0x3ee/0x4e0 ret_from_fork+0x1f/0x30 Allocated by task 1: kasan_save_stack+0x1b/0x40 __kasan_kmalloc+0x7c/0x90 thermal_cooling_device_setup_sysfs+0x153/0x2c0 __thermal_cooling_device_register.part.0+0x25b/0x9c0 thermal_cooling_device_register+0xb3/0x100 mlxsw_thermal_init+0x5c5/0x7e0 __mlxsw_core_bus_device_register+0xcb3/0x19c0 mlxsw_core_bus_device_register+0x56/0xb0 mlxsw_pci_probe+0x54f/0x710 local_pci_probe+0xc6/0x170 pci_device_probe+0x2b2/0x4d0 really_probe+0x293/0xd10 __driver_probe_device+0x2af/0x440 driver_probe_device+0x51/0x1e0 __driver_attach+0x21b/0x530 bus_for_each_dev+0x14c/0x1d0 bus_add_driver+0x3ac/0x650 driver_register+0x241/0x3d0 mlxsw_sp_module_init+0xa2/0x174 do_one_initcall+0xee/0x5f0 kernel_init_freeable+0x45a/0x4de kernel_init+0x1f/0x210 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff8881052f7800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 1016 bytes inside of 1024-byte region [ffff8881052f7800, ffff8881052f7c00) The buggy address belongs to the page: page:0000000052355272 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1052f0 head:0000000052355272 order:3 compound_mapcount:0 compound_pincount:0 flags: 0x200000000010200(slab|head|node=0|zone=2) raw: 0200000000010200 ffffea0005034800 0000000300000003 ffff888100041dc0 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881052f7a80: 00 00 00 00 00 00 04 fc fc fc fc fc fc fc fc fc ffff8881052f7b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8881052f7b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff8881052f7c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881052f7c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [2] https://lore.kernel.org/linux-pm/9aca37cb-1629-5c67-1895-1fdc45c0244e@linaro.org/ [3] https://lore.kernel.org/linux-pm/af9857f2-578e-de3a-e62b-6baff7e69fd4@linaro.org/ CC: Daniel Lezcano <daniel.lezcano@linaro.org> Fixes: a50c1e35650b ("mlxsw: core: Implement thermal zone") Fixes: a421ce088ac8 ("mlxsw: core: Extend cooling device with cooling levels") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20211012174955.472928-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-14ethernet: s2io: fix setting mac address during resumeArnd Bergmann1-1/+1
After recent cleanups, gcc started warning about a suspicious memcpy() call during the s2io_io_resume() function: In function '__dev_addr_set', inlined from 'eth_hw_addr_set' at include/linux/etherdevice.h:318:2, inlined from 's2io_set_mac_addr' at drivers/net/ethernet/neterion/s2io.c:5205:2, inlined from 's2io_io_resume' at drivers/net/ethernet/neterion/s2io.c:8569:7: arch/x86/include/asm/string_32.h:182:25: error: '__builtin_memcpy' accessing 6 bytes at offsets 0 and 2 overlaps 4 bytes at offset 2 [-Werror=restrict] 182 | #define memcpy(t, f, n) __builtin_memcpy(t, f, n) | ^~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/netdevice.h:4648:9: note: in expansion of macro 'memcpy' 4648 | memcpy(dev->dev_addr, addr, len); | ^~~~~~ What apparently happened is that an old cleanup changed the calling conventions for s2io_set_mac_addr() from taking an ethernet address as a character array to taking a struct sockaddr, but one of the callers was not changed at the same time. Change it to instead call the low-level do_s2io_prog_unicast() function that still takes the old argument type. Fixes: 2fd376884558 ("S2io: Added support set_mac_address driver entry point") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211013143613.2049096-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13net: encx24j600: check error in devm_regmap_init_encx24j600Nanyong Sun3-5/+14
devm_regmap_init may return error which caused by like out of memory, this will results in null pointer dereference later when reading or writing register: general protection fault in encx24j600_spi_probe KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097] CPU: 0 PID: 286 Comm: spi-encx24j600- Not tainted 5.15.0-rc2-00142-g9978db750e31-dirty #11 9c53a778c1306b1b02359f3c2bbedc0222cba652 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:regcache_cache_bypass drivers/base/regmap/regcache.c:540 Code: 54 41 89 f4 55 53 48 89 fb 48 83 ec 08 e8 26 94 a8 fe 48 8d bb a0 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 4a 03 00 00 4c 8d ab b0 00 00 00 48 8b ab a0 00 RSP: 0018:ffffc900010476b8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: fffffffffffffff4 RCX: 0000000000000000 RDX: 0000000000000012 RSI: ffff888002de0000 RDI: 0000000000000094 RBP: ffff888013c9a000 R08: 0000000000000000 R09: fffffbfff3f9cc6a R10: ffffc900010476e8 R11: fffffbfff3f9cc69 R12: 0000000000000001 R13: 000000000000000a R14: ffff888013c9af54 R15: ffff888013c9ad08 FS: 00007ffa984ab580(0000) GS:ffff88801fe00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055a6384136c8 CR3: 000000003bbe6003 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: encx24j600_spi_probe drivers/net/ethernet/microchip/encx24j600.c:459 spi_probe drivers/spi/spi.c:397 really_probe drivers/base/dd.c:517 __driver_probe_device drivers/base/dd.c:751 driver_probe_device drivers/base/dd.c:782 __device_attach_driver drivers/base/dd.c:899 bus_for_each_drv drivers/base/bus.c:427 __device_attach drivers/base/dd.c:971 bus_probe_device drivers/base/bus.c:487 device_add drivers/base/core.c:3364 __spi_add_device drivers/spi/spi.c:599 spi_add_device drivers/spi/spi.c:641 spi_new_device drivers/spi/spi.c:717 new_device_store+0x18c/0x1f1 [spi_stub 4e02719357f1ff33f5a43d00630982840568e85e] dev_attr_store drivers/base/core.c:2074 sysfs_kf_write fs/sysfs/file.c:139 kernfs_fop_write_iter fs/kernfs/file.c:300 new_sync_write fs/read_write.c:508 (discriminator 4) vfs_write fs/read_write.c:594 ksys_write fs/read_write.c:648 do_syscall_64 arch/x86/entry/common.c:50 entry_SYSCALL_64_after_hwframe arch/x86/entry/entry_64.S:113 Add error check in devm_regmap_init_encx24j600 to avoid this situation. Fixes: 04fbfce7a222 ("net: Microchip encx24j600 driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Link: https://lore.kernel.org/r/20211012125901.3623144-1-sunnanyong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13Merge tag 'mlx5-fixes-2021-10-12' of ↵Jakub Kicinski4-16/+66
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2021-10-12 * tag 'mlx5-fixes-2021-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Fix division by 0 in mlx5e_select_queue for representors net/mlx5e: Mutually exclude RX-FCS and RX-port-timestamp net/mlx5e: Switchdev representors are not vlan challenged net/mlx5e: Fix memory leak in mlx5_core_destroy_cq() error path net/mlx5e: Allow only complete TXQs partition in MQPRIO channel mode net/mlx5: Fix cleanup of bridge delayed work ==================== Link: https://lore.kernel.org/r/20211012205323.20123-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13net: korina: select CRC32Vegard Nossum1-0/+1
Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/net/ethernet/korina.o: in function `korina_multicast_list': korina.c:(.text+0x1af): undefined reference to `crc32_le' Fixes: ef11291bcd5f9 ("Add support the Korina (IDT RC32434) Ethernet MAC") Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Florian fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211012152509.21771-1-vegard.nossum@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13net: arc: select CRC32Vegard Nossum1-0/+1
Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/net/ethernet/arc/emac_main.o: in function `arc_emac_set_rx_mode': emac_main.c:(.text+0xb11): undefined reference to `crc32_le' The crc32_le() call comes through the ether_crc_le() call in arc_emac_set_rx_mode(). [v2: moved the select to ARC_EMAC_CORE; the Makefile is a bit confusing, but the error comes from emac_main.o, which is part of the arc_emac module, which in turn is enabled by CONFIG_ARC_EMAC_CORE. Note that arc_emac is different from emac_arc...] Fixes: 775dd682e2b0ec ("arc_emac: implement promiscuous mode and multicast filtering") Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Link: https://lore.kernel.org/r/20211012093446.1575-1-vegard.nossum@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12net: dsa: felix: break at first CPU port during init and teardownVladimir Oltean1-7/+12
The NXP LS1028A switch has two Ethernet ports towards the CPU, but only one of them is capable of acting as an NPI port at a time (inject and extract packets using DSA tags). However, using the alternative ocelot-8021q tagging protocol, it should be possible to use both CPU ports symmetrically, but for that we need to mark both ports in the device tree as DSA masters. In the process of doing that, it can be seen that traffic to/from the network stack gets broken, and this is because the Felix driver iterates through all DSA CPU ports and configures them as NPI ports. But since there can only be a single NPI port, we effectively end up in a situation where DSA thinks the default CPU port is the first one, but the hardware port configured to be an NPI is the last one. I would like to treat this as a bug, because if the updated device trees are going to start circulating, it would be really good for existing kernels to support them, too. Fixes: adb3dccf090b ("net: dsa: felix: convert to the new .change_tag_protocol DSA API") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12net: dsa: felix: purge skb from TX timestamping queue if it cannot be sentVladimir Oltean1-0/+28
At present, when a PTP packet which requires TX timestamping gets dropped under congestion by the switch, things go downhill very fast. The driver keeps a clone of that skb in a queue of packets awaiting TX timestamp interrupts, but interrupts will never be raised for the dropped packets. Moreover, matching timestamped packets to timestamps is done by a 2-bit timestamp ID, and this can wrap around and we can match on the wrong skb. Since with the default NPI-based tagging protocol, we get no notification about packet drops, the best we can do is eventually recover from the drop of a PTP frame: its skb will be dead memory until another skb which was assigned the same timestamp ID happens to find it. However, with the ocelot-8021q tagger which injects packets using the manual register interface, it appears that we can check for more information, such as: - whether the input queue has reached the high watermark or not - whether the injection group's FIFO can accept additional data or not so we know that a PTP frame is likely to get dropped before actually sending it, and drop it ourselves (because DSA uses NETIF_F_LLTX, so it can't return NETDEV_TX_BUSY to ask the qdisc to requeue the packet). But when we do that, we can also remove the skb from the timestamping queue, because there surely won't be any timestamp that matches it. Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12net: dsa: tag_ocelot_8021q: break circular dependency with ocelot switch libVladimir Oltean2-4/+93
Michael reported that when using the "ocelot-8021q" tagging protocol, the switch driver module must be manually loaded before the tagging protocol can be loaded/is available. This appears to be the same problem described here: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ where due to the fact that DSA tagging protocols make use of symbols exported by the switch drivers, circular dependencies appear and this breaks module autoloading. The ocelot_8021q driver needs the ocelot_can_inject() and ocelot_port_inject_frame() functions from the switch library. Previously the wrong approach was taken to solve that dependency: shims were provided for the case where the ocelot switch library was compiled out, but that turns out to be insufficient, because the dependency when the switch lib _is_ compiled is problematic too. We cannot declare ocelot_can_inject() and ocelot_port_inject_frame() as static inline functions, because these access I/O functions like __ocelot_write_ix() which is called by ocelot_write_rix(). Making those static inline basically means exposing the whole guts of the ocelot switch library, not ideal... We already have one tagging protocol driver which calls into the switch driver during xmit but not using any exported symbol: sja1105_defer_xmit. We can do the same thing here: create a kthread worker and one work item per skb, and let the switch driver itself do the register accesses to send the skb, and then consume it. Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") Reported-by: Michael Walle <michael@walle.cc> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12net: dsa: tag_ocelot: break circular dependency with ocelot switch lib driverVladimir Oltean2-17/+1
As explained here: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ DSA tagging protocol drivers cannot depend on symbols exported by switch drivers, because this creates a circular dependency that breaks module autoloading. The tag_ocelot.c file depends on the ocelot_ptp_rew_op() function exported by the common ocelot switch lib. This function looks at OCELOT_SKB_CB(skb) and computes how to populate the REW_OP field of the DSA tag, for PTP timestamping (the command: one-step/two-step, and the TX timestamp identifier). None of that requires deep insight into the driver, it is quite stateless, as it only depends upon the skb->cb. So let's make it a static inline function and put it in include/linux/dsa/ocelot.h, a file that despite its name is used by the ocelot switch driver for populating the injection header too - since commit 40d3f295b5fe ("net: mscc: ocelot: use common tag parsing code with DSA"). With that function declared as static inline, its body is expanded inside each call site, so the dependency is broken and the DSA tagger can be built without the switch library, upon which the felix driver depends. Fixes: 39e5308b3250 ("net: mscc: ocelot: support PTP Sync one-step timestamping") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12net: mscc: ocelot: cross-check the sequence id from the timestamp FIFO with ↵Vladimir Oltean1-1/+23
the skb PTP header The sad reality is that when a PTP frame with a TX timestamping request is transmitted, it isn't guaranteed that it will make it all the way to the wire (due to congestion inside the switch), and that a timestamp will be taken by the hardware and placed in the timestamp FIFO where an IRQ will be raised for it. The implication is that if enough PTP frames are silently dropped by the hardware such that the timestamp ID has rolled over, it is possible to match a timestamp to an old skb. Furthermore, nobody will match on the real skb corresponding to this timestamp, since we stupidly matched on a previous one that was stale in the queue, and stopped there. So PTP timestamping will be broken and there will be no way to recover. It looks like the hardware parses the sequenceID from the PTP header, and also provides that metadata for each timestamp. The driver currently ignores this, but it shouldn't. As an extra resiliency measure, do the following: - check whether the PTP sequenceID also matches between the skb and the timestamp, treat the skb as stale otherwise and free it - if we see a stale skb, don't stop there and try to match an skb one more time, chances are there's one more skb in the queue with the same timestamp ID, otherwise we wouldn't have ever found the stale one (it is by timestamp ID that we matched it). While this does not prevent PTP packet drops, it at least prevents the catastrophic consequences of incorrect timestamp matching. Since we already call ptp_classify_raw in the TX path, save the result in the skb->cb of the clone, and just use that result in the interrupt code path. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12net: mscc: ocelot: deny TX timestamping of non-PTP packetsVladimir Oltean1-7/+12
It appears that Ocelot switches cannot timestamp non-PTP frames, I tested this using the isochron program at: https://github.com/vladimiroltean/tsn-scripts with the result that the driver increments the ocelot_port->ts_id counter as expected, puts it in the REW_OP, but the hardware seems to not timestamp these packets at all, since no IRQ is emitted. Therefore check whether we are sending PTP frames, and refuse to populate REW_OP otherwise. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12net: mscc: ocelot: warn when a PTP IRQ is raised for an unknown skbVladimir Oltean1-3/+3
When skb_match is NULL, it means we received a PTP IRQ for a timestamp ID that the kernel has no idea about, since there is no skb in the timestamping queue with that timestamp ID. This is a grave error and not something to just "continue" over. So print a big warning in case this happens. Also, move the check above ocelot_get_hwtimestamp(), there is no point in reading the full 64-bit current PTP time if we're not going to do anything with it anyway for this skb. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12net: mscc: ocelot: avoid overflowing the PTP timestamp FIFOVladimir Oltean2-8/+35
PTP packets with 2-step TX timestamp requests are matched to packets based on the egress port number and a 6-bit timestamp identifier. All PTP timestamps are held in a common FIFO that is 128 entry deep. This patch ensures that back-to-back timestamping requests cannot exceed the hardware FIFO capacity. If that happens, simply send the packets without requesting a TX timestamp to be taken (in the case of felix, since the DSA API has a void return code in ds->ops->port_txtstamp) or drop them (in the case of ocelot). I've moved the ts_id_lock from a per-port basis to a per-switch basis, because we need separate accounting for both numbers of PTP frames in flight. And since we need locking to inc/dec the per-switch counter, that also offers protection for the per-port counter and hence there is no reason to have a per-port counter anymore. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12net: mscc: ocelot: make use of all 63 PTP timestamp identifiersVladimir Oltean1-1/+3
At present, there is a problem when user space bombards a port with PTP event frames which have TX timestamping requests (or when a tc-taprio offload is installed on a port, which delays the TX timestamps by a significant amount of time). The driver will happily roll over the 2-bit timestamp ID and this will cause incorrect matches between an skb and the TX timestamp collected from the FIFO. The Ocelot switches have a 6-bit PTP timestamp identifier, and the value 63 is reserved, so that leaves identifiers 0-62 to be used. The timestamp identifiers are selected by the REW_OP packet field, and are actually shared between CPU-injected frames and frames which match a VCAP IS2 rule that modifies the REW_OP. The hardware supports partitioning between the two uses of the REW_OP field through the PTP_ID_LOW and PTP_ID_HIGH registers, and by default reserves the PTP IDs 0-3 for CPU-injected traffic and the rest for VCAP IS2. The driver does not use VCAP IS2 to set REW_OP for 2-step timestamping, and it also writes 0xffffffff to both PTP_ID_HIGH and PTP_ID_LOW in ocelot_init_timestamp() which makes all timestamp identifiers available to CPU injection. Therefore, we can make use of all 63 timestamp identifiers, which should allow more timestampable packets to be in flight on each port. This is only part of the solution, more issues will be addressed in future changes. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12net: dsa: sja1105: break dependency between dsa_port_is_sja1105 and switch ↵Vladimir Oltean1-2/+1
driver It's nice to be able to test a tagging protocol with dsa_loop, but not at the cost of losing the ability of building the tagging protocol and switch driver as modules, because as things stand, there is a circular dependency between the two. Tagging protocol drivers cannot depend on switch drivers, that is a hard fact. The reasoning behind the blamed patch was that accessing dp->priv should first make sure that the structure behind that pointer is what we really think it is. Currently the "sja1105" and "sja1110" tagging protocols only operate with the sja1105 switch driver, just like any other tagging protocol and switch combination. The only way to mix and match them is by modifying the code, and this applies to dsa_loop as well (by default that uses DSA_TAG_PROTO_NONE). So while in principle there is an issue, in practice there isn't one. Until we extend dsa_loop to allow user space configuration, treat the problem as a non-issue and just say that DSA ports found by tag_sja1105 are always sja1105 ports, which is in fact true. But keep the dsa_port_is_sja1105 function so that it's easy to patch it during testing, and rely on dead code elimination. Fixes: 994d2cbb08ca ("net: dsa: tag_sja1105: be dsa_loop-safe") Link: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12net: dsa: move sja1110_process_meta_tstamp inside the tagging protocol driverVladimir Oltean2-58/+6
The problem is that DSA tagging protocols really must not depend on the switch driver, because this creates a circular dependency at insmod time, and the switch driver will effectively not load when the tagging protocol driver is missing. The code was structured in the way it was for a reason, though. The DSA driver-facing API for PTP timestamping relies on the assumption that two-step TX timestamps are provided by the hardware in an out-of-band manner, typically by raising an interrupt and making that timestamp available inside some sort of FIFO which is to be accessed over SPI/MDIO/etc. So the API puts .port_txtstamp into dsa_switch_ops, because it is expected that the switch driver needs to save some state (like put the skb into a queue until its TX timestamp arrives). On SJA1110, TX timestamps are provided by the switch as Ethernet packets, so this makes them be received and processed by the tagging protocol driver. This in itself is great, because the timestamps are full 64-bit and do not require reconstruction, and since Ethernet is the fastest I/O method available to/from the switch, PTP timestamps arrive very quickly, no matter how bottlenecked the SPI connection is, because SPI interaction is not needed at all. DSA's code structure and strict isolation between the tagging protocol driver and the switch driver break the natural code organization. When the tagging protocol driver receives a packet which is classified as a metadata packet containing timestamps, it passes those timestamps one by one to the switch driver, which then proceeds to compare them based on the recorded timestamp ID that was generated in .port_txtstamp. The communication between the tagging protocol and the switch driver is done through a method exported by the switch driver, sja1110_process_meta_tstamp. To satisfy build requirements, we force a dependency to build the tagging protocol driver as a module when the switch driver is a module. However, as explained in the first paragraph, that causes the circular dependency. To solve this, move the skb queue from struct sja1105_private :: struct sja1105_ptp_data to struct sja1105_private :: struct sja1105_tagger_data. The latter is a data structure for which hacks have already been put into place to be able to create persistent storage per switch that is accessible from the tagging protocol driver (see sja1105_setup_ports). With the skb queue directly accessible from the tagging protocol driver, we can now move sja1110_process_meta_tstamp into the tagging driver itself, and avoid exporting a symbol. Fixes: 566b18c8b752 ("net: dsa: sja1105: implement TX timestamping for SJA1110") Link: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12nfp: flow_offload: move flow_indr_dev_register from app init to app startBaowen Zheng1-5/+14
In commit 74fc4f828769 ("net: Fix offloading indirect devices dependency on qdisc order creation"), it adds a process to trigger the callback to setup the bo callback when the driver regists a callback. In our current implement, we are not ready to run the callback when nfp call the function flow_indr_dev_register, then there will be error message as: kernel: Oops: 0000 [#1] SMP PTI kernel: CPU: 0 PID: 14119 Comm: kworker/0:0 Tainted: G kernel: Workqueue: events work_for_cpu_fn kernel: RIP: 0010:nfp_flower_indr_setup_tc_cb+0x258/0x410 kernel: RSP: 0018:ffffbc1e02c57bf8 EFLAGS: 00010286 kernel: RAX: 0000000000000000 RBX: ffff9c761fabc000 RCX: 0000000000000001 kernel: RDX: 0000000000000001 RSI: fffffffffffffff0 RDI: ffffffffc0be9ef1 kernel: RBP: ffffbc1e02c57c58 R08: ffffffffc08f33aa R09: ffff9c6db7478800 kernel: R10: 0000009c003f6e00 R11: ffffbc1e02800000 R12: ffffbc1e000d9000 kernel: R13: ffffbc1e000db428 R14: ffff9c6db7478800 R15: ffff9c761e884e80 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: fffffffffffffff0 CR3: 00000009e260a004 CR4: 00000000007706f0 kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 kernel: PKRU: 55555554 kernel: Call Trace: kernel: ? flow_indr_dev_register+0xab/0x210 kernel: ? __cond_resched+0x15/0x30 kernel: ? kmem_cache_alloc_trace+0x44/0x4b0 kernel: ? nfp_flower_setup_tc+0x1d0/0x1d0 [nfp] kernel: flow_indr_dev_register+0x158/0x210 kernel: ? tcf_block_unbind+0xe0/0xe0 kernel: nfp_flower_init+0x40b/0x650 [nfp] kernel: nfp_net_pci_probe+0x25f/0x960 [nfp] kernel: ? nfp_rtsym_read_le+0x76/0x130 [nfp] kernel: nfp_pci_probe+0x6a9/0x820 [nfp] kernel: local_pci_probe+0x45/0x80 So we need to call flow_indr_dev_register in app start process instead of init stage. Fixes: 74fc4f828769 ("net: Fix offloading indirect devices dependency on qdisc order creation") Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Link: https://lore.kernel.org/r/20211012124850.13025-1-louis.peens@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12net/mlx5e: Fix division by 0 in mlx5e_select_queue for representorsMaxim Mikityanskiy1-0/+5
Commit 846d6da1fcdb ("net/mlx5e: Fix division by 0 in mlx5e_select_queue") makes mlx5e_build_nic_params assign a non-zero initial value to priv->num_tc_x_num_ch, so that mlx5e_select_queue doesn't fail with division by 0 if called before the first activation of channels. However, the initialization flow of representors doesn't call mlx5e_build_nic_params, so this bug can still happen with representors. This commit fixes the bug by adding the missing assignment to mlx5e_build_rep_params. Fixes: 846d6da1fcdb ("net/mlx5e: Fix division by 0 in mlx5e_select_queue") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-12net/mlx5e: Mutually exclude RX-FCS and RX-port-timestampAya Levin1-5/+52
Due to current HW arch limitations, RX-FCS (scattering FCS frame field to software) and RX-port-timestamp (improved timestamp accuracy on the receive side) can't work together. RX-port-timestamp is not controlled by the user and it is enabled by default when supported by the HW/FW. This patch sets RX-port-timestamp opposite to RX-FCS configuration. Fixes: 102722fc6832 ("net/mlx5e: Add support for RXFCS feature flag") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-12net/mlx5e: Switchdev representors are not vlan challengedSaeed Mahameed1-1/+0
Before this patch, mlx5 representors advertised the NETIF_F_VLAN_CHALLENGED bit, this could lead to missing features when using reps with vxlan/bridge and maybe other virtual interfaces, when such interfaces inherit this bit and block vlan usage in their topology. Example: $ip link add dev bridge type bridge # add representor interface to the bridge $ip link set dev pf0hpf master $ip link add link bridge name vlan10 type vlan id 10 protocol 802.1q Error: 8021q: VLANs not supported on device. Reps are perfectly capable of handling vlan traffic, although they don't implement vlan_{add,kill}_vid ndos, hence, remove NETIF_F_VLAN_CHALLENGED advertisement. Fixes: cb67b832921c ("net/mlx5e: Introduce SRIOV VF representors") Reported-by: Roopa Prabhu <roopa@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com>
2021-10-12net/mlx5e: Fix memory leak in mlx5_core_destroy_cq() error pathValentine Fatiev1-4/+3
Prior to this patch in case mlx5_core_destroy_cq() failed it returns without completing all destroy operations and that leads to memory leak. Instead, complete the destroy flow before return error. Also move mlx5_debug_cq_remove() to the beginning of mlx5_core_destroy_cq() to be symmetrical with mlx5_core_create_cq(). kmemleak complains on: unreferenced object 0xc000000038625100 (size 64): comm "ethtool", pid 28301, jiffies 4298062946 (age 785.380s) hex dump (first 32 bytes): 60 01 48 94 00 00 00 c0 b8 05 34 c3 00 00 00 c0 `.H.......4..... 02 00 00 00 00 00 00 00 00 db 7d c1 00 00 00 c0 ..........}..... backtrace: [<000000009e8643cb>] add_res_tree+0xd0/0x270 [mlx5_core] [<00000000e7cb8e6c>] mlx5_debug_cq_add+0x5c/0xc0 [mlx5_core] [<000000002a12918f>] mlx5_core_create_cq+0x1d0/0x2d0 [mlx5_core] [<00000000cef0a696>] mlx5e_create_cq+0x210/0x3f0 [mlx5_core] [<000000009c642c26>] mlx5e_open_cq+0xb4/0x130 [mlx5_core] [<0000000058dfa578>] mlx5e_ptp_open+0x7f4/0xe10 [mlx5_core] [<0000000081839561>] mlx5e_open_channels+0x9cc/0x13e0 [mlx5_core] [<0000000009cf05d4>] mlx5e_switch_priv_channels+0xa4/0x230 [mlx5_core] [<0000000042bbedd8>] mlx5e_safe_switch_params+0x14c/0x300 [mlx5_core] [<0000000004bc9db8>] set_pflag_tx_port_ts+0x9c/0x160 [mlx5_core] [<00000000a0553443>] mlx5e_set_priv_flags+0xd0/0x1b0 [mlx5_core] [<00000000a8f3d84b>] ethnl_set_privflags+0x234/0x2d0 [<00000000fd27f27c>] genl_family_rcv_msg_doit+0x108/0x1d0 [<00000000f495e2bb>] genl_family_rcv_msg+0xe4/0x1f0 [<00000000646c5c2c>] genl_rcv_msg+0x78/0x120 [<00000000d53e384e>] netlink_rcv_skb+0x74/0x1a0 Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Valentine Fatiev <valentinef@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-12net/mlx5e: Allow only complete TXQs partition in MQPRIO channel modeTariq Toukan1-2/+2
Do not allow configurations of MQPRIO channel mode that do not fully define and utilize the channels txqs. Fixes: ec60c4581bd9 ("net/mlx5e: Support MQPRIO channel mode") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Powered by cgit, Gruvboxed by Blaster4385.