aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2020-10-27ravb: Fix bit fields checking in ravb_hwtstamp_get()Andrew Gabbasov1-3/+7
In the function ravb_hwtstamp_get() in ravb_main.c with the existing values for RAVB_RXTSTAMP_TYPE_V2_L2_EVENT (0x2) and RAVB_RXTSTAMP_TYPE_ALL (0x6) if (priv->tstamp_rx_ctrl & RAVB_RXTSTAMP_TYPE_V2_L2_EVENT) config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT; else if (priv->tstamp_rx_ctrl & RAVB_RXTSTAMP_TYPE_ALL) config.rx_filter = HWTSTAMP_FILTER_ALL; if the test on RAVB_RXTSTAMP_TYPE_ALL should be true, it will never be reached. This issue can be verified with 'hwtstamp_config' testing program (tools/testing/selftests/net/hwtstamp_config.c). Setting filter type to ALL and subsequent retrieving it gives incorrect value: $ hwtstamp_config eth0 OFF ALL flags = 0 tx_type = OFF rx_filter = ALL $ hwtstamp_config eth0 flags = 0 tx_type = OFF rx_filter = PTP_V2_L2_EVENT Correct this by converting if-else's to switch. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Reported-by: Julia Lawall <[email protected]> Signed-off-by: Andrew Gabbasov <[email protected]> Reviewed-by: Sergei Shtylyov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-27chelsio/chtls: fix memory leaks in CPL handlersVinay Kumar Yadav1-15/+12
CPL handler functions chtls_pass_open_rpl() and chtls_close_listsrv_rpl() should return CPL_RET_BUF_DONE so that caller function will do skb free to avoid leak. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Vinay Kumar Yadav <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-27chelsio/chtls: fix deadlock issueVinay Kumar Yadav1-2/+0
In chtls_pass_establish() we hold child socket lock using bh_lock_sock and we are again trying bh_lock_sock in add_to_reap_list, causing deadlock. Remove bh_lock_sock in add_to_reap_list() as lock is already held. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Vinay Kumar Yadav <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-27Merge tag 'x86-urgent-2020-10-27' of ↵Linus Torvalds1-1/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A couple of x86 fixes which missed rc1 due to my stupidity: - Drop lazy TLB mode before switching to the temporary address space for text patching. text_poke() switches to the temporary mm which clears the lazy mode and restores the original mm afterwards. Due to clearing lazy mode this might restore a already dead mm if exit_mmap() runs in parallel on another CPU. - Document the x32 syscall design fail vs. syscall numbers 512-547 properly. - Fix the ORC unwinder to handle the inactive task frame correctly. This was unearthed due to the slightly different code generation of gcc-10. - Use an up to date screen_info for the boot params of kexec instead of the possibly stale and invalid version which happened to be valid when the kexec kernel was loaded" * tag 'x86-urgent-2020-10-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/alternative: Don't call text_poke() in lazy TLB mode x86/syscalls: Document the fact that syscalls 512-547 are a legacy mistake x86/unwind/orc: Fix inactive tasks with stack pointer in %sp on GCC 10 compiled kernels hyperv_fb: Update screen_info after removing old framebuffer x86/kexec: Use up-to-dated screen_info copy to fill boot params
2020-10-27drm/vc4: hdmi: Avoid sleeping in atomic contextMaxime Ripard1-2/+3
When running the trigger hook, ALSA by default will take a spinlock, and thus will run the trigger hook in atomic context. However, our HDMI driver will send the infoframes as part of the trigger hook, and part of that process is to wait for a bit to be cleared for up to 100ms. To be nicer to the system, that wait has some usleep_range that interact poorly with the atomic context. There's several ways we can fix this, but the more obvious one is to make ALSA take a mutex instead by setting the nonatomic flag on the DAI link. That doesn't work though, since now the cyclic callback installed by the dmaengine helpers in ALSA will take a mutex, while that callback is run by dmaengine's virt-chan code in a tasklet where sleeping is not allowed either. Given the delay we need to poll the bit for, changing the usleep_range for a udelay and keep running it from a context where interrupts are disabled is not really a good option either. However, we can move the infoframe setup code in the hw_params hook, like is usually done in other HDMI controllers, that isn't protected by a spinlock and thus where we can sleep. Infoframes will be sent on a regular basis anyway, and since hw_params is where the audio parameters that end up in the infoframes are setup, this also makes a bit more sense. Fixes: bb7d78568814 ("drm/vc4: Add HDMI audio support") Suggested-by: Mark Brown <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Reviewed-by: Mark Brown <[email protected]> Reviewed-by: Takashi Iwai <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-27ACPI: NFIT: Fix comparison to '-ENXIO'Zhang Qilong1-1/+1
Initial value of rc is '-ENXIO', and we should use the initial value to check it. Signed-off-by: Zhang Qilong <[email protected]> Reviewed-by: Pankaj Gupta <[email protected]> Reviewed-by: Vishal Verma <[email protected]> [ rjw: Subject edit ] Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-10-27ACPI: dock: fix enum-conversion warningArnd Bergmann1-1/+2
gcc points out a type mismatch: drivers/acpi/dock.c: In function 'hot_remove_dock_devices': drivers/acpi/dock.c:234:53: warning: implicit conversion from 'enum <anonymous>' to 'enum dock_callback_type' [-Wenum-conversion] 234 | dock_hotplug_event(dd, ACPI_NOTIFY_EJECT_REQUEST, false); This is harmless because 'false' still has the correct numeric value, but passing DOCK_CALL_HANDLER documents better what is going on and avoids the warning. Fixes: 37f908778f20 ("ACPI / dock: Walk list in reverse order during removal of devices") Fixes: f09ce741a03a ("ACPI / dock / PCI: Drop ACPI dock notifier chain") Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Hanjun Guo <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-10-27PNP: fix kernel-doc markupsMauro Carvalho Chehab1-2/+2
It sounds that there were function renames. Update the kernel-doc markups accordingly. Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-10-27device property: Don't clear secondary pointer for shared primary firmware nodeAndy Shevchenko1-1/+3
It appears that firmware nodes can be shared between devices. In such case when a (child) device is about to be deleted, its firmware node may be shared and ACPI_COMPANION_SET(..., NULL) call for it breaks the secondary link of the shared primary firmware node. In order to prevent that, check, if the device has a parent and parent's firmware node is shared with its child, and avoid crashing the link. Fixes: c15e1bdda436 ("device property: Fix the secondary firmware node handling in set_primary_fwnode()") Reported-by: Ferry Toth <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Tested-by: Ferry Toth <[email protected]> Cc: 5.9+ <[email protected]> # 5.9+ Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-10-27device property: Keep secondary firmware node secondary by typeAndy Shevchenko1-1/+1
Behind primary and secondary we understand the type of the nodes which might define their ordering. However, if primary node gone, we can't maintain the ordering by definition of the linked list. Thus, by ordering secondary node becomes first in the list. But in this case the meaning of it is still secondary (or auxiliary). The type of the node is maintained by the secondary pointer in it: secondary pointer Meaning NULL or valid primary node ERR_PTR(-ENODEV) secondary node So, if by some reason we do the following sequence of calls set_primary_fwnode(dev, NULL); set_primary_fwnode(dev, primary); we should preserve secondary node. This concept is supported by the description of set_primary_fwnode() along with implementation of set_secondary_fwnode(). Hence, fix the commit c15e1bdda436 to follow this as well. Fixes: c15e1bdda436 ("device property: Fix the secondary firmware node handling in set_primary_fwnode()") Cc: Ferry Toth <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Tested-by: Ferry Toth <[email protected]> Cc: 5.9+ <[email protected]> # 5.9+ Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-10-27drm/amdgpu/pm: fix the fan speed in fan1_input in manual mode for navi1xAlex Deucher1-8/+3
It has been confirmed that the SMU metrics table should always reflect the current fan speed even in manual mode. Fixes: 3033e9f1c2de ("drm/amdgpu/swsmu: handle manual fan readback on SMU11") Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-10-27drm/amd/pm: fix the wrong fan speed in fan1_inputKenneth Feng1-8/+3
fix the wrong fan speed in fan1_input when the fan control mode is manual. the fan speed value is not correct when we set manual mode to fan1_enalbe - 1. since the fan speed in the metrics table always reflects the real fan speed,we can fetch the fan speed for both auto and manual mode. Signed-off-by: Kenneth Feng <[email protected]> Reviewed-by: Likun Gao <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-10-27drm/amdgpu/swsmu: drop smu i2c bus on navi1xAlex Deucher1-25/+0
Stop registering the SMU i2c bus on navi1x. This leads to instability issues when userspace processes mess with the bus and also seems to cause display stability issues in some cases. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1314 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1341 Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-10-27intel_idle: Fix max_cstate for processor models without C-state tablesChen Yu1-1/+1
Currently intel_idle driver gets the c-state information from ACPI _CST if the processor model is not recognized by it. However the c-state in _CST starts with index 1 which is different from the index in intel_idle driver's internal c-state table. While intel_idle_max_cstate_reached() was previously introduced to deal with intel_idle driver's internal c-state table, re-using this function directly on _CST is incorrect. Fix this by subtracting 1 from the index when checking max_cstate in the _CST case. For example, append intel_idle.max_cstate=1 in boot command line, Before the patch: grep . /sys/devices/system/cpu/cpu0/cpuidle/state*/name POLL After the patch: grep . /sys/devices/system/cpu/cpu0/cpuidle/state*/name /sys/devices/system/cpu/cpu0/cpuidle/state0/name:POLL /sys/devices/system/cpu/cpu0/cpuidle/state1/name:C1_ACPI Fixes: 18734958e9bf ("intel_idle: Use ACPI _CST for processor models without C-state tables") Reported-by: Pengfei Xu <[email protected]> Cc: 5.6+ <[email protected]> # 5.6+ Signed-off-by: Chen Yu <[email protected]> [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-10-27cpufreq: intel_pstate: Avoid missing HWP max updates in passive modeRafael J. Wysocki1-7/+6
If the cpufreq policy max limit is changed when intel_pstate operates in the passive mode with HWP enabled and the "powersave" governor is used on top of it, the HWP max limit is not updated as appropriate. Namely, in the "powersave" governor case, the target P-state is always equal to the policy min limit, so if the latter does not change, intel_cpufreq_adjust_hwp() is not invoked to update the HWP Request MSR due to the "target_pstate != old_pstate" check in intel_cpufreq_update_pstate(), so the HWP max limit is not updated as a result. Also, if the CPUFREQ_NEED_UPDATE_LIMITS flag is not set for the driver and the target frequency does not change along with the policy max limit, the "target_freq == policy->cur" check in __cpufreq_driver_target() prevents the driver's ->target() callback from being invoked at all, so the HWP max limit is not updated. To prevent that occurring, set the CPUFREQ_NEED_UPDATE_LIMITS flag in the intel_cpufreq driver structure if HWP is enabled and modify intel_cpufreq_update_pstate() to do the "target_pstate != old_pstate" check only in the non-HWP case and let intel_cpufreq_adjust_hwp() always run in the HWP case (it will update HWP Request only if the cached value of the register is different from the new one including the limits, so if neither the target P-state value nor the max limit changes, the register write will still be avoided). Fixes: f6ebbcf08f37 ("cpufreq: intel_pstate: Implement passive mode with HWP enabled") Reported-by: Zhang Rui <[email protected]> Cc: 5.9+ <[email protected]> # 5.9+: 1c534352f47f cpufreq: Introduce CPUFREQ_NEED_UPDATE_LIMITS ... Signed-off-by: Rafael J. Wysocki <[email protected]> Acked-by: Viresh Kumar <[email protected]> Tested-by: Zhang Rui <[email protected]>
2020-10-27cpufreq: Introduce CPUFREQ_NEED_UPDATE_LIMITS driver flagRafael J. Wysocki1-1/+2
Generally, a cpufreq driver may need to update some internal upper and lower frequency boundaries on policy max and min changes, respectively, but currently this does not work if the target frequency does not change along with the policy limit. Namely, if the target frequency does not change along with the policy min or max, the "target_freq == policy->cur" check in __cpufreq_driver_target() prevents driver callbacks from being invoked and they do not even have a chance to update the corresponding internal boundary. This particularly affects the "powersave" and "performance" governors that always set the target frequency to one of the policy limits and it never changes when the other limit is updated. To allow cpufreq the drivers needing to update internal frequency boundaries on policy limits changes to avoid this issue, introduce a new driver flag, CPUFREQ_NEED_UPDATE_LIMITS, that (when set) will neutralize the check mentioned above. Signed-off-by: Rafael J. Wysocki <[email protected]> Acked-by: Viresh Kumar <[email protected]>
2020-10-27cpufreq: Avoid configuring old governors as default with intel_pstateRafael J. Wysocki1-0/+2
Commit 33aa46f252c7 ("cpufreq: intel_pstate: Use passive mode by default without HWP") was meant to cause intel_pstate to be used in the passive mode with the schedutil governor on top of it, but it missed the case in which either "ondemand" or "conservative" was selected as the default governor in the existing kernel config, in which case the previous old governor configuration would be used, causing the default legacy governor to be used on top of intel_pstate instead of schedutil. Address this by preventing "ondemand" and "conservative" from being configured as the default cpufreq governor in the case when schedutil is the default choice for the default governor setting. [Note that the default cpufreq governor can still be set via the kernel command line if need be and that choice is not limited, so if anyone really wants to use one of the legacy governors by default, it can be achieved this way.] Fixes: 33aa46f252c7 ("cpufreq: intel_pstate: Use passive mode by default without HWP") Reported-by: Julia Lawall <[email protected]> Cc: 5.8+ <[email protected]> # 5.8+ Signed-off-by: Rafael J. Wysocki <[email protected]> Acked-by: Viresh Kumar <[email protected]>
2020-10-27cpufreq: e_powersaver: remove unreachable breakZhang Qilong2-2/+0
A 'break' following a 'return' statement is pointless, so remove it. Signed-off-by: Zhang Qilong <[email protected]> Acked-by: Viresh Kumar <[email protected]> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-10-27Merge tag 'devicetree-fixes-for-5.10-1' of ↵Linus Torvalds1-2/+11
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - More binding additionalProperties/unevaluatedProperties additions - More yamllint fixes on additions in the merge window - CrOS embedded controller schema updates to fix warnings - LEDs schema update adding ID_RGB - A reserved-memory fix for regions starting at address 0x0 * tag 'devicetree-fixes-for-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: Another round of adding missing 'additionalProperties/unevalutatedProperties' dt-bindings: Explicitly allow additional properties in board/SoC schemas dt-bindings: More whitespace clean-ups in schema files mfd: google,cros-ec: add missing properties dt-bindings: input: convert cros-ec-keyb to json-schema dt-bindings: i2c: convert i2c-cros-ec-tunnel to json-schema of: Fix reserved-memory overlap detection dt-bindings: mailbox: mtk-gce: fix incorrect mbox-cells value dt-bindings: leds: Update devicetree documents for ID_RGB
2020-10-27drm/vc4: drv: Add error handding for bindHoegeun Kwon1-0/+1
There is a problem that if vc4_drm bind fails, a memory leak occurs on the drm_property_create side. Add error handding for drm_mode_config. Signed-off-by: Hoegeun Kwon <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-27interconnect: qcom: use icc_sync state for sm8[12]50Dmitry Baryshkov2-6/+8
In addition to the rest of Qcom interconnect drivers use icc_sync_state for SM8150/SM8250 interconnect drivers to notify the interconnect framework when all consumers are probed and there is no need to keep the bandwidth set to maximum anymore. Also move the BCM initialization before creating the nodes to set the max bandwidth in hardware for the initialization/probing stage. Signed-off-by: Dmitry Baryshkov <[email protected]> Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Georgi Djakov <[email protected]>
2020-10-27staging: fieldbus: anybuss: jump to correct label in an error pathJing Xiangfeng1-1/+1
In current code, controller_probe() misses to call ida_simple_remove() in an error path. Jump to correct label to fix it. Fixes: 17614978ed34 ("staging: fieldbus: anybus-s: support the Arcx anybus controller") Reviewed-by: Sven Van Asbroeck <[email protected]> Signed-off-by: Jing Xiangfeng <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-10-27staging: wfx: fix test on return value of gpiod_get_value()Jérôme Pouiller1-1/+1
The commit 8522d62e6bca ("staging: wfx: gpiod_get_value() can return an error") has changed the way the driver test the value returned by gpiod_get_value(). The new code was wrong. Fixes: 8522d62e6bca ("staging: wfx: gpiod_get_value() can return an error") Signed-off-by: Jérôme Pouiller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-10-27staging: wfx: fix use of uninitialized pointerJérôme Pouiller1-3/+3
With -Wuninitialized, the compiler complains: drivers/staging/wfx/data_tx.c:34:19: warning: variable 'band' is uninitialized when used here [-Wuninitialized] if (rate->idx >= band->n_bitrates) { ^~~~ Reported-by: kernel test robot <[email protected]> Reported-by: Nathan Chancellor <[email protected]> Fixes: 868fd970e187 ("staging: wfx: improve robustness of wfx_get_hw_rate()") Signed-off-by: Jérôme Pouiller <[email protected]> Reviewed-by: Nathan Chancellor <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-10-27staging: mmal-vchiq: Fix memory leak for vchiq_instanceSeung-Woo Kim1-4/+15
The vchiq_instance is allocated with vchiq_initialise() but never freed properly. Fix memory leak for the vchiq_instance. Reported-by: Jaehoon Chung <[email protected]> Signed-off-by: Seung-Woo Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-10-27staging: comedi: cb_pcidas: Allow 2-channel commands for AO subdeviceIan Abbott1-0/+1
The "cb_pcidas" driver supports asynchronous commands on the analog output (AO) subdevice for those boards that have an AO FIFO. The code (in `cb_pcidas_ao_check_chanlist()` and `cb_pcidas_ao_cmd()`) to validate and set up the command supports output to a single channel or to two channels simultaneously (the boards have two AO channels). However, the code in `cb_pcidas_auto_attach()` that initializes the subdevices neglects to initialize the AO subdevice's `len_chanlist` member, leaving it set to 0, but the Comedi core will "correct" it to 1 if the driver neglected to set it. This limits commands to use a single channel (either channel 0 or 1), but the limit should be two channels. Set the AO subdevice's `len_chanlist` member to be the same value as the `n_chan` member, which will be 2. Cc: <[email protected]> Signed-off-by: Ian Abbott <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-10-27staging: octeon: Drop on uncorrectable alignment or FCS errorAlexander Sverdlin1-15/+19
Currently in case of alignment or FCS error if the packet cannot be corrected it's still not dropped. Report the error properly and drop the packet while making the code around a little bit more readable. Fixes: 80ff0fd3ab64 ("Staging: Add octeon-ethernet driver files.") Signed-off-by: Alexander Sverdlin <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-10-27staging: octeon: repair "fixed-link" supportAlexander Sverdlin2-6/+9
The PHYs must be registered once in device probe function, not in device open callback because it's only possible to register them once. Fixes: a25e278020bf ("staging: octeon: support fixed-link phys") Signed-off-by: Alexander Sverdlin <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-10-27drm: kernel-doc: add description for a new function parameterMauro Carvalho Chehab1-0/+1
As reported by "make htmldocs": ./drivers/gpu/drm/drm_prime.c:808: warning: Function parameter or member 'dev' not described in 'drm_prime_pages_to_sg' Add a description for the new parameter. Fixes: 707d561f77b5 ("drm: allow limiting the scatter list size.") Signed-off-by: Mauro Carvalho Chehab <[email protected]> Acked-by: Gerd Hoffmann <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/9366f48e6e9c3ec2f31a3e68452a2b23a1089fce.1603791716.git.mchehab+huawei@kernel.org
2020-10-27drm/dp: fix a kernel-doc issue at drm_edid.cMauro Carvalho Chehab1-1/+1
The name of the argument is different, causing those warnings: ./drivers/gpu/drm/drm_edid.c:3754: warning: Function parameter or member 'video_code' not described in 'drm_display_mode_from_cea_vic' ./drivers/gpu/drm/drm_edid.c:3754: warning: Excess function parameter 'vic' description in 'drm_display_mode_from_cea_vic' Fixes: 7af655bce275 ("drm/dp: Add drm_dp_downstream_mode()") Reviewed-by: Lyude Paul <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/7f4d6c3ff6df63ebd006eb90a5108006c23e2168.1603791716.git.mchehab+huawei@kernel.org
2020-10-27drm/dp: fix kernel-doc warnings at drm_dp_helper.cMauro Carvalho Chehab1-0/+5
As warned by kernel-doc: ./drivers/gpu/drm/drm_dp_helper.c:385: warning: Function parameter or member 'type' not described in 'drm_dp_downstream_is_type' ./drivers/gpu/drm/drm_dp_helper.c:886: warning: Function parameter or member 'dev' not described in 'drm_dp_downstream_mode' Some function parameters weren't documented. Fixes: 38784f6f8805 ("drm/dp: Add helpers to identify downstream facing port types") Reviewed-by: Lyude Paul <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/03c9c8ba3f492aca76e2b4836803219cd9c971cf.1603791716.git.mchehab+huawei@kernel.org
2020-10-27drm: kernel-doc: document drm_dp_set_subconnector_property() paramsMauro Carvalho Chehab1-1/+6
Changeset e5b92773287c ("drm: report dp downstream port type as a subconnector property") added a new function to the kAPI, but didn't add any documentation for the parameters for drm_dp_set_subconnector_property(). Fixes: e5b92773287c ("drm: report dp downstream port type as a subconnector property") Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/0870be85a77bea4ba5cf1715010834289a4e10b1.1603791716.git.mchehab+huawei@kernel.org
2020-10-27nvmet: fix a NULL pointer dereference when tracing the flush commandChaitanya Kulkarni2-16/+9
When target side trace in turned on and flush command is issued from the host it results in the following Oops. [ 856.789724] BUG: kernel NULL pointer dereference, address: 0000000000000068 [ 856.790686] #PF: supervisor read access in kernel mode [ 856.791262] #PF: error_code(0x0000) - not-present page [ 856.791863] PGD 6d7110067 P4D 6d7110067 PUD 66f0ad067 PMD 0 [ 856.792527] Oops: 0000 [#1] SMP NOPTI [ 856.792950] CPU: 15 PID: 7034 Comm: nvme Tainted: G OE 5.9.0nvme-5.9+ #71 [ 856.793790] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e3214 [ 856.794956] RIP: 0010:trace_event_raw_event_nvmet_req_init+0x13e/0x170 [nvmet] [ 856.795734] Code: 41 5c 41 5d c3 31 d2 31 f6 e8 4e 9b b8 e0 e9 0e ff ff ff 49 8b 55 00 48 8b 38 8b 0 [ 856.797740] RSP: 0018:ffffc90001be3a60 EFLAGS: 00010246 [ 856.798375] RAX: 0000000000000000 RBX: ffff8887e7d2c01c RCX: 0000000000000000 [ 856.799234] RDX: 0000000000000020 RSI: 0000000057e70ea2 RDI: ffff8887e7d2c034 [ 856.800088] RBP: ffff88869f710578 R08: ffff888807500d40 R09: 00000000fffffffe [ 856.800951] R10: 0000000064c66670 R11: 00000000ef955201 R12: ffff8887e7d2c034 [ 856.801807] R13: ffff88869f7105c8 R14: 0000000000000040 R15: ffff88869f710440 [ 856.802667] FS: 00007f6a22bd8780(0000) GS:ffff888813a00000(0000) knlGS:0000000000000000 [ 856.803635] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 856.804367] CR2: 0000000000000068 CR3: 00000006d73e0000 CR4: 00000000003506e0 [ 856.805283] Call Trace: [ 856.805613] nvmet_req_init+0x27c/0x480 [nvmet] [ 856.806200] nvme_loop_queue_rq+0xcb/0x1d0 [nvme_loop] [ 856.806862] blk_mq_dispatch_rq_list+0x123/0x7b0 [ 856.807459] ? kvm_sched_clock_read+0x14/0x30 [ 856.808025] __blk_mq_sched_dispatch_requests+0xc7/0x170 [ 856.808708] blk_mq_sched_dispatch_requests+0x30/0x60 [ 856.809372] __blk_mq_run_hw_queue+0x70/0x100 [ 856.809935] __blk_mq_delay_run_hw_queue+0x156/0x170 [ 856.810574] blk_mq_run_hw_queue+0x86/0xe0 [ 856.811104] blk_mq_sched_insert_request+0xef/0x160 [ 856.811733] blk_execute_rq+0x69/0xc0 [ 856.812212] ? blk_mq_rq_ctx_init+0xd0/0x230 [ 856.812784] nvme_execute_passthru_rq+0x57/0x130 [nvme_core] [ 856.813461] nvme_submit_user_cmd+0xeb/0x300 [nvme_core] [ 856.814099] nvme_user_cmd.isra.82+0x11e/0x1a0 [nvme_core] [ 856.814752] blkdev_ioctl+0x1dc/0x2c0 [ 856.815197] block_ioctl+0x3f/0x50 [ 856.815606] __x64_sys_ioctl+0x84/0xc0 [ 856.816074] do_syscall_64+0x33/0x40 [ 856.816533] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 856.817168] RIP: 0033:0x7f6a222ed107 [ 856.817617] Code: 44 00 00 48 8b 05 81 cd 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 8 [ 856.819901] RSP: 002b:00007ffca848f058 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 856.820846] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f6a222ed107 [ 856.821726] RDX: 00007ffca848f060 RSI: 00000000c0484e43 RDI: 0000000000000003 [ 856.822603] RBP: 0000000000000003 R08: 000000000000003f R09: 0000000000000005 [ 856.823478] R10: 00007ffca848ece0 R11: 0000000000000202 R12: 00007ffca84912d3 [ 856.824359] R13: 00007ffca848f4d0 R14: 0000000000000002 R15: 000000000067e900 [ 856.825236] Modules linked in: nvme_loop(OE) nvmet(OE) nvme_fabrics(OE) null_blk nvme(OE) nvme_corel Move the nvmet_req_init() tracepoint after we parse the command in nvmet_req_init() so that we can get rid of the duplicate nvmet_find_namespace() call. Rename __assign_disk_name() -> __assign_req_name(). Now that we call tracepoint after parsing the command simplify the newly added __assign_req_name() which fixes this bug. Signed-off-by: Chaitanya Kulkarni <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2020-10-27nvme-fc: remove nvme_fc_terminate_io()James Smart1-33/+16
__nvme_fc_terminate_io() is now called by only 1 place, in reset_work. Consoldate and move the functionality of terminate_io into reset_work. In reset_work, rather than calling the create_association directly, schedule the connect work element to do its thing. After scheduling, flush the connect work element to continue with semantic of not returning until connect has been attempted at least once. Signed-off-by: James Smart <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2020-10-27nvme-fc: eliminate terminate_io use by nvme_fc_error_recoveryJames Smart1-103/+84
nvme_fc_error_recovery() special cases handling when in CONNECTING state and calls __nvme_fc_terminate_io(). __nvme_fc_terminate_io() itself special cases CONNECTING state and calls the routine to abort outstanding ios. Simplify the sequence by putting the call to abort outstanding I/Os directly in nvme_fc_error_recovery. Move the location of __nvme_fc_abort_outstanding_ios(), and nvme_fc_terminate_exchange() which is called by it, to avoid adding function prototypes for nvme_fc_error_recovery(). Signed-off-by: James Smart <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2020-10-27nvme-fc: remove err_work work itemJames Smart1-30/+10
err_work was created to handle errors (mainly I/O timeouts) while in CONNECTING state. The flag for err_work_active is also unneeded. Remove err_work_active and err_work. The actions to abort I/Os are moved inline to nvme_error_recovery(). Signed-off-by: James Smart <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2020-10-27nvme-fc: track error_recovery while connectingJames Smart1-5/+9
Whenever there are errors during CONNECTING, the driver recovers by aborting all outstanding ios and counts on the io completion to fail them and thus the connection/association they are on. However, the connection failure depends on a failure state from the core routines. Not all commands that are issued by the core routine are guaranteed to cause a failure of the core routine. They may be treated as a failure status and the status is then ignored. As such, whenever the transport enters error_recovery while CONNECTING, it will set a new flag indicating an association failed. The create_association routine which creates and initializes the controller, will monitor the state of the flag as well as the core routine error status and ensure the association fails if there was an error. Signed-off-by: James Smart <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2020-10-27nvme-rdma: handle unexpected nvme completion data lengthzhenwei pi1-0/+8
Receiving a zero length message leads to the following warnings because the CQE is processed twice: refcount_t: underflow; use-after-free. WARNING: CPU: 0 PID: 0 at lib/refcount.c:28 RIP: 0010:refcount_warn_saturate+0xd9/0xe0 Call Trace: <IRQ> nvme_rdma_recv_done+0xf3/0x280 [nvme_rdma] __ib_process_cq+0x76/0x150 [ib_core] ... Sanity check the received data length, to avoids this. Thanks to Chao Leng & Sagi for suggestions. Signed-off-by: zhenwei pi <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2020-10-27nvme: ignore zone validate errors on subsequent scansKeith Busch1-1/+1
Revalidating nvme zoned namespaces requires IO commands, and there are controller states that prevent IO. For example, a sanitize in progress is required to fail all IO, but we don't want to remove a namespace we've previously added just because the controller is in such a state. Suppress the error in this case. Reported-by: Michael Nguyen <[email protected]> Signed-off-by: Keith Busch <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2020-10-27memory: tegra: Sort tegra210_swgroups by reg addressNicolin Chen1-10/+10
Cleanup the list of swgroups (ordering by register address) to prepare for new ones. Signed-off-by: Nicolin Chen <[email protected]> Acked-by: Thierry Reding <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2020-10-27memory: tegra: Correct tegra210_mc_clients def valuesNicolin Chen1-14/+14
Some def values are mismatched with Tegra X1 TRM, probably because being copied from tegra124.c file. Signed-off-by: Nicolin Chen <[email protected]> Acked-by: Thierry Reding <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2020-10-27memory: tegra: Correct la.reg address of seswrNicolin Chen1-1/+1
According to Tegra X1 TRM, ALLOWANCE_SESWR is located in field [23:16] of register at address 0x3e0 with a reset value of 0x80 at register 0x3e0, while bit-1 of register 0xb98 is for enable bit of seswr. Signed-off-by: Nicolin Chen <[email protected]> Acked-by: Thierry Reding <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2020-10-26net: hns3: Clear the CMDQ registers before unmapping BAR regionZenghui Yu1-1/+1
When unbinding the hns3 driver with the HNS3 VF, I got the following kernel panic: [ 265.709989] Unable to handle kernel paging request at virtual address ffff800054627000 [ 265.717928] Mem abort info: [ 265.720740] ESR = 0x96000047 [ 265.723810] EC = 0x25: DABT (current EL), IL = 32 bits [ 265.729126] SET = 0, FnV = 0 [ 265.732195] EA = 0, S1PTW = 0 [ 265.735351] Data abort info: [ 265.738227] ISV = 0, ISS = 0x00000047 [ 265.742071] CM = 0, WnR = 1 [ 265.745055] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000009b54000 [ 265.751753] [ffff800054627000] pgd=0000202ffffff003, p4d=0000202ffffff003, pud=00002020020eb003, pmd=00000020a0dfc003, pte=0000000000000000 [ 265.764314] Internal error: Oops: 96000047 [#1] SMP [ 265.830357] CPU: 61 PID: 20319 Comm: bash Not tainted 5.9.0+ #206 [ 265.836423] Hardware name: Huawei TaiShan 2280 V2/BC82AMDDA, BIOS 1.05 09/18/2019 [ 265.843873] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--) [ 265.843890] pc : hclgevf_cmd_uninit+0xbc/0x300 [ 265.861988] lr : hclgevf_cmd_uninit+0xb0/0x300 [ 265.861992] sp : ffff80004c983b50 [ 265.881411] pmr_save: 000000e0 [ 265.884453] x29: ffff80004c983b50 x28: ffff20280bbce500 [ 265.889744] x27: 0000000000000000 x26: 0000000000000000 [ 265.895034] x25: ffff800011a1f000 x24: ffff800011a1fe90 [ 265.900325] x23: ffff0020ce9b00d8 x22: ffff0020ce9b0150 [ 265.905616] x21: ffff800010d70e90 x20: ffff800010d70e90 [ 265.910906] x19: ffff0020ce9b0080 x18: 0000000000000004 [ 265.916198] x17: 0000000000000000 x16: ffff800011ae32e8 [ 265.916201] x15: 0000000000000028 x14: 0000000000000002 [ 265.916204] x13: ffff800011ae32e8 x12: 0000000000012ad8 [ 265.946619] x11: ffff80004c983b50 x10: 0000000000000000 [ 265.951911] x9 : ffff8000115d0888 x8 : 0000000000000000 [ 265.951914] x7 : ffff800011890b20 x6 : c0000000ffff7fff [ 265.951917] x5 : ffff80004c983930 x4 : 0000000000000001 [ 265.951919] x3 : ffffa027eec1b000 x2 : 2b78ccbbff369100 [ 265.964487] x1 : 0000000000000000 x0 : ffff800054627000 [ 265.964491] Call trace: [ 265.964494] hclgevf_cmd_uninit+0xbc/0x300 [ 265.964496] hclgevf_uninit_ae_dev+0x9c/0xe8 [ 265.964501] hnae3_unregister_ae_dev+0xb0/0x130 [ 265.964516] hns3_remove+0x34/0x88 [hns3] [ 266.009683] pci_device_remove+0x48/0xf0 [ 266.009692] device_release_driver_internal+0x114/0x1e8 [ 266.030058] device_driver_detach+0x28/0x38 [ 266.034224] unbind_store+0xd4/0x108 [ 266.037784] drv_attr_store+0x40/0x58 [ 266.041435] sysfs_kf_write+0x54/0x80 [ 266.045081] kernfs_fop_write+0x12c/0x250 [ 266.049076] vfs_write+0xc4/0x248 [ 266.052378] ksys_write+0x74/0xf8 [ 266.055677] __arm64_sys_write+0x24/0x30 [ 266.059584] el0_svc_common.constprop.3+0x84/0x270 [ 266.064354] do_el0_svc+0x34/0xa0 [ 266.067658] el0_svc+0x38/0x40 [ 266.070700] el0_sync_handler+0x8c/0xb0 [ 266.074519] el0_sync+0x140/0x180 It looks like the BAR memory region had already been unmapped before we start clearing CMDQ registers in it, which is pretty bad and the kernel happily kills itself because of a Current EL Data Abort (on arm64). Moving the CMDQ uninitialization a bit early fixes the issue for me. Fixes: 862d969a3a4d ("net: hns3: do VF's pci re-initialization while PF doing FLR") Signed-off-by: Zenghui Yu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-26bnxt_en: Send HWRM_FUNC_RESET fw command unconditionally.Vasundhara Volam1-1/+2
In the AER or firmware reset flow, if we are in fatal error state or if pci_channel_offline() is true, we don't send any commands to the firmware because the commands will likely not reach the firmware and most commands don't matter much because the firmware is likely to be reset imminently. However, the HWRM_FUNC_RESET command is different and we should always attempt to send it. In the AER flow for example, the .slot_reset() call will trigger this fw command and we need to try to send it to effect the proper reset. Fixes: b340dc680ed4 ("bnxt_en: Avoid sending firmware messages when AER error is detected.") Reviewed-by: Edwin Peer <[email protected]> Signed-off-by: Vasundhara Volam <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-26bnxt_en: Check abort error state in bnxt_open_nic().Michael Chan1-1/+4
bnxt_open_nic() is called during configuration changes that require the NIC to be closed and then opened. This call is protected by rtnl_lock. Firmware reset can be happening at the same time. Only critical portions of the entire firmware reset sequence are protected by the rtnl_lock. It is possible that bnxt_open_nic() can be called when the firmware reset sequence is aborting. In that case, bnxt_open_nic() needs to check if the ABORT_ERR flag is set and abort if it is. The configuration change that resulted in the bnxt_open_nic() call will fail but the NIC will be brought to a consistent IF_DOWN state. Without this patch, if bnxt_open_nic() were to continue in this error state, it may crash like this: [ 1648.659736] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1648.659768] IP: [<ffffffffc01e9b3a>] bnxt_alloc_mem+0x50a/0x1140 [bnxt_en] [ 1648.659796] PGD 101e1b3067 PUD 101e1b2067 PMD 0 [ 1648.659813] Oops: 0000 [#1] SMP [ 1648.659825] Modules linked in: xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter sunrpc dell_smbios dell_wmi_descriptor dcdbas amd64_edac_mod edac_mce_amd kvm_amd kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper vfat cryptd fat pcspkr ipmi_ssif sg k10temp i2c_piix4 wmi ipmi_si ipmi_devintf ipmi_msghandler tpm_crb acpi_power_meter sch_fq_codel ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm ahci drm libahci megaraid_sas crct10dif_pclmul crct10dif_common [ 1648.660063] tg3 libata crc32c_intel bnxt_en(OE) drm_panel_orientation_quirks devlink ptp pps_core dm_mirror dm_region_hash dm_log dm_mod fuse [ 1648.660105] CPU: 13 PID: 3867 Comm: ethtool Kdump: loaded Tainted: G OE ------------ 3.10.0-1152.el7.x86_64 #1 [ 1648.660911] Hardware name: Dell Inc. PowerEdge R7515/0R4CNN, BIOS 1.2.14 01/28/2020 [ 1648.661662] task: ffff94e64cbc9080 ti: ffff94f55df1c000 task.ti: ffff94f55df1c000 [ 1648.662409] RIP: 0010:[<ffffffffc01e9b3a>] [<ffffffffc01e9b3a>] bnxt_alloc_mem+0x50a/0x1140 [bnxt_en] [ 1648.663171] RSP: 0018:ffff94f55df1fba8 EFLAGS: 00010202 [ 1648.663927] RAX: 0000000000000000 RBX: ffff94e6827e0000 RCX: 0000000000000000 [ 1648.664684] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff94e6827e08c0 [ 1648.665433] RBP: ffff94f55df1fc20 R08: 00000000000001ff R09: 0000000000000008 [ 1648.666184] R10: 0000000000000d53 R11: ffff94f55df1f7ce R12: ffff94e6827e08c0 [ 1648.666940] R13: ffff94e6827e08c0 R14: ffff94e6827e08c0 R15: ffffffffb9115e40 [ 1648.667695] FS: 00007f8aadba5740(0000) GS:ffff94f57eb40000(0000) knlGS:0000000000000000 [ 1648.668447] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1648.669202] CR2: 0000000000000000 CR3: 0000001022772000 CR4: 0000000000340fe0 [ 1648.669966] Call Trace: [ 1648.670730] [<ffffffffc01f1d5d>] ? bnxt_need_reserve_rings+0x9d/0x170 [bnxt_en] [ 1648.671496] [<ffffffffc01fa7ea>] __bnxt_open_nic+0x8a/0x9a0 [bnxt_en] [ 1648.672263] [<ffffffffc01f7479>] ? bnxt_close_nic+0x59/0x1b0 [bnxt_en] [ 1648.673031] [<ffffffffc01fb11b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 1648.673793] [<ffffffffc020037c>] bnxt_set_ringparam+0x6c/0xa0 [bnxt_en] [ 1648.674550] [<ffffffffb8a5f564>] dev_ethtool+0x1334/0x21a0 [ 1648.675306] [<ffffffffb8a719ff>] dev_ioctl+0x1ef/0x5f0 [ 1648.676061] [<ffffffffb8a324bd>] sock_do_ioctl+0x4d/0x60 [ 1648.676810] [<ffffffffb8a326bb>] sock_ioctl+0x1eb/0x2d0 [ 1648.677548] [<ffffffffb8663230>] do_vfs_ioctl+0x3a0/0x5b0 [ 1648.678282] [<ffffffffb8b8e678>] ? __do_page_fault+0x238/0x500 [ 1648.679016] [<ffffffffb86634e1>] SyS_ioctl+0xa1/0xc0 [ 1648.679745] [<ffffffffb8b93f92>] system_call_fastpath+0x25/0x2a [ 1648.680461] Code: 9e 60 01 00 00 0f 1f 40 00 45 8b 8e 48 01 00 00 31 c9 45 85 c9 0f 8e 73 01 00 00 66 0f 1f 44 00 00 49 8b 86 a8 00 00 00 48 63 d1 <48> 8b 14 d0 48 85 d2 0f 84 46 01 00 00 41 8b 86 44 01 00 00 c7 [ 1648.681986] RIP [<ffffffffc01e9b3a>] bnxt_alloc_mem+0x50a/0x1140 [bnxt_en] [ 1648.682724] RSP <ffff94f55df1fba8> [ 1648.683451] CR2: 0000000000000000 Fixes: ec5d31e3c15d ("bnxt_en: Handle firmware reset status during IF_UP.") Reviewed-by: Vasundhara Volam <[email protected]> Reviewed-by: Pavan Chebbi <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-26bnxt_en: Re-write PCI BARs after PCI fatal error.Vasundhara Volam2-1/+19
When a PCIe fatal error occurs, the internal latched BAR addresses in the chip get reset even though the BAR register values in config space are retained. pci_restore_state() will not rewrite the BAR addresses if the BAR address values are valid, causing the chip's internal BAR addresses to stay invalid. So we need to zero the BAR registers during PCIe fatal error to force pci_restore_state() to restore the BAR addresses. These write cycles to the BAR registers will cause the proper BAR addresses to latch internally. Fixes: 6316ea6db93d ("bnxt_en: Enable AER support.") Signed-off-by: Vasundhara Volam <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-26bnxt_en: Invoke cancel_delayed_work_sync() for PFs also.Vasundhara Volam1-11/+2
As part of the commit b148bb238c02 ("bnxt_en: Fix possible crash in bnxt_fw_reset_task()."), cancel_delayed_work_sync() is called only for VFs to fix a possible crash by cancelling any pending delayed work items. It was assumed by mistake that the flush_workqueue() call on the PF would flush delayed work items as well. As flush_workqueue() does not cancel the delayed workqueue, extend the fix for PFs. This fix will avoid the system crash, if there are any pending delayed work items in fw_reset_task() during driver's .remove() call. Unify the workqueue cleanup logic for both PF and VF by calling cancel_work_sync() and cancel_delayed_work_sync() directly in bnxt_remove_one(). Fixes: b148bb238c02 ("bnxt_en: Fix possible crash in bnxt_fw_reset_task().") Reviewed-by: Pavan Chebbi <[email protected]> Reviewed-by: Andy Gospodarek <[email protected]> Signed-off-by: Vasundhara Volam <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-26bnxt_en: Fix regression in workqueue cleanup logic in bnxt_remove_one().Vasundhara Volam1-4/+5
A recent patch has moved the workqueue cleanup logic before calling unregister_netdev() in bnxt_remove_one(). This caused a regression because the workqueue can be restarted if the device is still open. Workqueue cleanup must be done after unregister_netdev(). The workqueue will not restart itself after the device is closed. Call bnxt_cancel_sp_work() after unregister_netdev() and call bnxt_dl_fw_reporters_destroy() after that. This fixes the regession and the original NULL ptr dereference issue. Fixes: b16939b59cc0 ("bnxt_en: Fix NULL ptr dereference crash in bnxt_fw_reset_task()") Signed-off-by: Vasundhara Volam <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-26mlxsw: core: Fix use-after-free in mlxsw_emad_trans_finish()Amit Cohen1-0/+3
Each EMAD transaction stores the skb used to issue the EMAD request ('trans->tx_skb') so that the request could be retried in case of a timeout. The skb can be freed when a corresponding response is received or as part of the retry logic (e.g., failed retransmit, exceeded maximum number of retries). The two tasks (i.e., response processing and retransmits) are synchronized by the atomic 'trans->active' field which ensures that responses to inactive transactions are ignored. In case of a failed retransmit the transaction is finished and all of its resources are freed. However, the current code does not mark it as inactive. Syzkaller was able to hit a race condition in which a concurrent response is processed while the transaction's resources are being freed, resulting in a use-after-free [1]. Fix the issue by making sure to mark the transaction as inactive after a failed retransmit and free its resources only if a concurrent task did not already do that. [1] BUG: KASAN: use-after-free in consume_skb+0x30/0x370 net/core/skbuff.c:833 Read of size 4 at addr ffff88804f570494 by task syz-executor.0/1004 CPU: 0 PID: 1004 Comm: syz-executor.0 Not tainted 5.8.0-rc7+ #68 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xf6/0x16e lib/dump_stack.c:118 print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 check_memory_region_inline mm/kasan/generic.c:186 [inline] check_memory_region+0x14e/0x1b0 mm/kasan/generic.c:192 instrument_atomic_read include/linux/instrumented.h:56 [inline] atomic_read include/asm-generic/atomic-instrumented.h:27 [inline] refcount_read include/linux/refcount.h:147 [inline] skb_unref include/linux/skbuff.h:1044 [inline] consume_skb+0x30/0x370 net/core/skbuff.c:833 mlxsw_emad_trans_finish+0x64/0x1c0 drivers/net/ethernet/mellanox/mlxsw/core.c:592 mlxsw_emad_process_response drivers/net/ethernet/mellanox/mlxsw/core.c:651 [inline] mlxsw_emad_rx_listener_func+0x5c9/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:672 mlxsw_core_skb_receive+0x4df/0x770 drivers/net/ethernet/mellanox/mlxsw/core.c:2063 mlxsw_pci_cqe_rdq_handle drivers/net/ethernet/mellanox/mlxsw/pci.c:595 [inline] mlxsw_pci_cq_tasklet+0x12a6/0x2520 drivers/net/ethernet/mellanox/mlxsw/pci.c:651 tasklet_action_common.isra.0+0x13f/0x3e0 kernel/softirq.c:550 __do_softirq+0x223/0x964 kernel/softirq.c:292 asm_call_on_stack+0x12/0x20 arch/x86/entry/entry_64.S:711 Allocated by task 1006: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:494 [inline] __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467 slab_post_alloc_hook mm/slab.h:586 [inline] slab_alloc_node mm/slub.c:2824 [inline] slab_alloc mm/slub.c:2832 [inline] kmem_cache_alloc+0xcd/0x2e0 mm/slub.c:2837 __build_skb+0x21/0x60 net/core/skbuff.c:311 __netdev_alloc_skb+0x1e2/0x360 net/core/skbuff.c:464 netdev_alloc_skb include/linux/skbuff.h:2810 [inline] mlxsw_emad_alloc drivers/net/ethernet/mellanox/mlxsw/core.c:756 [inline] mlxsw_emad_reg_access drivers/net/ethernet/mellanox/mlxsw/core.c:787 [inline] mlxsw_core_reg_access_emad+0x1ab/0x1420 drivers/net/ethernet/mellanox/mlxsw/core.c:1817 mlxsw_reg_trans_query+0x39/0x50 drivers/net/ethernet/mellanox/mlxsw/core.c:1831 mlxsw_sp_sb_pm_occ_clear drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c:260 [inline] mlxsw_sp_sb_occ_max_clear+0xbff/0x10a0 drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c:1365 mlxsw_devlink_sb_occ_max_clear+0x76/0xb0 drivers/net/ethernet/mellanox/mlxsw/core.c:1037 devlink_nl_cmd_sb_occ_max_clear_doit+0x1ec/0x280 net/core/devlink.c:1765 genl_family_rcv_msg_doit net/netlink/genetlink.c:669 [inline] genl_family_rcv_msg net/netlink/genetlink.c:714 [inline] genl_rcv_msg+0x617/0x980 net/netlink/genetlink.c:731 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2470 genl_rcv+0x24/0x40 net/netlink/genetlink.c:742 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline] netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1330 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0x150/0x190 net/socket.c:671 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2359 ___sys_sendmsg+0xff/0x170 net/socket.c:2413 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2446 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:384 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 73: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] kasan_set_free_info mm/kasan/common.c:316 [inline] __kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455 slab_free_hook mm/slub.c:1474 [inline] slab_free_freelist_hook mm/slub.c:1507 [inline] slab_free mm/slub.c:3072 [inline] kmem_cache_free+0xbe/0x380 mm/slub.c:3088 kfree_skbmem net/core/skbuff.c:622 [inline] kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:616 __kfree_skb net/core/skbuff.c:679 [inline] consume_skb net/core/skbuff.c:837 [inline] consume_skb+0xe1/0x370 net/core/skbuff.c:831 mlxsw_emad_trans_finish+0x64/0x1c0 drivers/net/ethernet/mellanox/mlxsw/core.c:592 mlxsw_emad_transmit_retry.isra.0+0x9d/0xc0 drivers/net/ethernet/mellanox/mlxsw/core.c:613 mlxsw_emad_trans_timeout_work+0x43/0x50 drivers/net/ethernet/mellanox/mlxsw/core.c:625 process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269 worker_thread+0x9e/0x1050 kernel/workqueue.c:2415 kthread+0x355/0x470 kernel/kthread.c:291 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293 The buggy address belongs to the object at ffff88804f5703c0 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 212 bytes inside of 224-byte region [ffff88804f5703c0, ffff88804f5704a0) The buggy address belongs to the page: page:ffffea00013d5c00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x100000000000200(slab) raw: 0100000000000200 dead000000000100 dead000000000122 ffff88806c625400 raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88804f570380: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff88804f570400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88804f570480: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff88804f570500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88804f570580: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc Fixes: caf7297e7ab5f ("mlxsw: core: Introduce support for asynchronous EMAD register access") Signed-off-by: Amit Cohen <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-26mlxsw: core: Fix memory leak on module removalIdo Schimmel1-0/+2
Free the devlink instance during the teardown sequence in the non-reload case to avoid the following memory leak. unreferenced object 0xffff888232895000 (size 2048): comm "modprobe", pid 1073, jiffies 4295568857 (age 164.871s) hex dump (first 32 bytes): 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de ........"....... 10 50 89 32 82 88 ff ff 10 50 89 32 82 88 ff ff .P.2.....P.2.... backtrace: [<00000000c704e9a6>] __kmalloc+0x13a/0x2a0 [<00000000ee30129d>] devlink_alloc+0xff/0x760 [<0000000092ab3e5d>] 0xffffffffa042e5b0 [<000000004f3f8a31>] 0xffffffffa042f6ad [<0000000092800b4b>] 0xffffffffa0491df3 [<00000000c4843903>] local_pci_probe+0xcb/0x170 [<000000006993ded7>] pci_device_probe+0x2c2/0x4e0 [<00000000a8e0de75>] really_probe+0x2c5/0xf90 [<00000000d42ba75d>] driver_probe_device+0x1eb/0x340 [<00000000bcc95e05>] device_driver_attach+0x294/0x300 [<000000000e2bc177>] __driver_attach+0x167/0x2f0 [<000000007d44cd6e>] bus_for_each_dev+0x148/0x1f0 [<000000003cd5a91e>] driver_attach+0x45/0x60 [<000000000041ce51>] bus_add_driver+0x3b8/0x720 [<00000000f5215476>] driver_register+0x230/0x4e0 [<00000000d79356f5>] __pci_register_driver+0x190/0x200 Fixes: a22712a96291 ("mlxsw: core: Fix devlink unregister flow") Signed-off-by: Ido Schimmel <[email protected]> Reported-by: Vadim Pasternak <[email protected]> Tested-by: Oleksandr Shamray <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.