| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing fix from Bartosz Golaszewski:
"A follow-up fix for the power sequencing subsystem. It turned out the
previous fix for this driver was incomplete and broke the WLAN support
on some platforms. This addresses the issue.
- set the direction of the wlan-enable GPIO to output after
requesting it as-is"
* tag 'pwrseq-fixes-for-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: qcom-wcn: set the wlan-enable GPIO to output
|
|
Commit a9aaf1ff88a8 ("power: sequencing: request the WLAN enable GPIO
as-is") broke WLAN on boards on which the wlan-enable GPIO enabling the
wifi module isn't in output mode by default. We need to set direction to
output while retaining the value that was already set to keep the ath
module on if it's already started.
Fixes: a9aaf1ff88a8 ("power: sequencing: request the WLAN enable GPIO as-is")
Link: https://lore.kernel.org/r/20240823115500.37280-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 6.11-rc6. Included in here are:
- dwc3 driver fixes for reported issues
- MAINTAINER file update, marking a driver as unsupported :(
- cdnsp driver fixes
- USB gadget driver fix
- USB sysfs fix
- other tiny fixes
- new device ids for usb serial driver
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add MeiG Smart SRM825L
usb: cdnsp: fix for Link TRB with TC
usb: dwc3: st: add missing depopulate in probe error path
usb: dwc3: st: fix probed platform device ref count on probe error path
usb: dwc3: ep0: Don't reset resource alloc flag (including ep0)
usb: core: sysfs: Unmerge @usb3_hardware_lpm_attr_group in remove_power_attributes()
usb: typec: fsa4480: Relax CHIP_ID check
usb: dwc3: xilinx: add missing depopulate in probe error path
usb: dwc3: omap: add missing depopulate in probe error path
dt-bindings: usb: microchip,usb2514: Fix reference USB device schema
usb: gadget: uvc: queue pump work in uvcg_video_enable()
cdc-acm: Add DISABLE_ECHO quirk for GE HealthCare UI Controller
usb: cdnsp: fix incorrect index in cdnsp_get_hw_deq function
usb: dwc3: core: Prevent USB core invalid event buffer address access
MAINTAINERS: Mark UVC gadget driver as orphan
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Minor fixes only.
The sd.c one ignores a sync cache request if format is in progress
which can happen if formatting a drive across suspend/resume"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Ignore command SYNCHRONIZE CACHE error if format in progress
scsi: aacraid: Fix double-free on probe failure
scsi: lpfc: Fix overflow build issue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There is a fairly large number of bug fixes for Qualcomm platforms,
most of them addressing issues with the devicetree files for the newly
added Snapdragon X1 based laptops to make them more reliable.
The Qualcomm driver changes address a few build-time issues as well as
runtime problems in the tzmem and scm firmware, the USB Type-C driver,
and the cmd-db and pmic_glink soc drivers.
The NXP i.MX usually gets a bunch of devicetree fixes that is
proportional to the number of supported machines. This includes both
warning fixes and correctness for the 64-bit i.MX9, i.MX8 and
layerscape platforms, as well as a single fix for a 32-bit i.MX6 based
board.
The other changes are the usual minor changes, including an update to
the MAINTAINERS file, an omap3 dts file and a SoC driver for mpfs
(risc-v)"
* tag 'arm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
firmware: microchip: fix incorrect error report of programming:timeout on success
soc: qcom: pd-mapper: Fix singleton refcount
firmware: qcom: tzmem: disable sdm670 platform
soc: qcom: pmic_glink: Actually communicate when remote goes down
usb: typec: ucsi: Move unregister out of atomic section
soc: qcom: pmic_glink: Fix race during initialization
firmware: qcom: qseecom: remove unused functions
firmware: qcom: tzmem: fix virtual-to-physical address conversion
firmware: qcom: scm: Mark get_wq_ctx() as atomic call
arm64: dts: qcom: x1e80100: Fix Adreno SMMU global interrupt
arm64: dts: qcom: disable GPU on x1e80100 by default
arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
arm64: dts: imx95: correct L3Cache cache-sets
arm64: dts: imx95: correct a55 power-domains
arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo
arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges
ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design
arm64: dts: imx93: update default value for snps,clk-csr
arm64: dts: freescale: tqma9352: Fix watchdog reset
arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fix from Dmitry Torokhov:
- a fix for Cypress PS/2 touchpad for regression introduced in 6.11
merge window where a timeout condition is incorrectly reported for
all extended Cypress commands
* tag 'input-for-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cypress_ps2 - fix waiting for command response
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Add Manivannan Sadhasivam as PCI native host bridge and endpoint
driver reviewer (Manivannan Sadhasivam)
- Disable MHI RAM data parity error interrupt for qcom SA8775P SoC to
work around hardware erratum that causes a constant stream of
interrupts (Manivannan Sadhasivam)
- Don't try to fall back to qcom Operating Performance Points (OPP)
support unless the platform actually supports OPP (Manivannan
Sadhasivam)
- Add imx@lists.linux.dev mailing list to MAINTAINERS for NXP
layerscape and imx6 PCI controller drivers (Frank Li)
* tag 'pci-v6.11-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
MAINTAINERS: PCI: Add NXP PCI controller mailing list imx@lists.linux.dev
PCI: qcom: Use OPP only if the platform supports it
PCI: qcom-ep: Disable MHI RAM data parity error interrupt for SA8775P SoC
MAINTAINERS: Add Manivannan Sadhasivam as Reviewer for PCI native host bridge and endpoint drivers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix three issues in the amd-pstate cpufreq driver.
Specifics:
- Remove checks for highest performance match on preferred cores when
updating preferred core ranking in amd-pstate (Mario Limonciello)
- Make amd-pstate call topology_logical_package_id() instead of
logical_die_id() to get a socked ID for a CPU (Gautham Shenoy)
- Fix uninitialized variable in amd_pstate_cpu_boost_update() (Dan
Carpenter)"
* tag 'pm-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate-ut: Don't check for highest perf matching on prefcore
cpufreq/amd-pstate: Use topology_logical_package_id() instead of logical_die_id()
cpufreq: amd-pstate: Fix uninitialized variable in amd_pstate_cpu_boost_update()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- A bunch of dw driver changes to fix the src/dst addr width config
- Omap driver fix for sglen initialization
- stm32-dma3 driver lli_size init fix
- dw edma driver fixes for watermark interrupts and unmasking STOP and
ABORT interrupts
* tag 'dmaengine-fix-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: dw-edma: Do not enable watermark interrupts for HDMA
dmaengine: dw-edma: Fix unmasking STOP and ABORT interrupts for HDMA
dmaengine: stm32-dma3: Set lli_size after allocation
dmaengine: ti: omap-dma: Initialize sglen after allocation
dmaengine: dw: Unify ret-val local variables naming
dmaengine: dw: Simplify max-burst calculation procedure
dmaengine: dw: Define encode_maxburst() above prepare_ctllo() callbacks
dmaengine: dw: Simplify prepare CTL_LO methods
dmaengine: dw: Add memory bus width verification
dmaengine: dw: Add peripheral bus width verification
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- Qualcomm QMP X1E80100 PCIe Gen4 PHY initialisation fix
- Freescale imx8mq tuning parameter name fix
- Samsung exynos5 fir for error code in probe()
- Xilinx Zynqmp SGMII linkup failure fix
* tag 'phy-fixes-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: xilinx: phy-zynqmp: Fix SGMII linkup failure on resume
phy: exynos5-usbdrd: fix error code in probe()
phy: fsl-imx8mq-usb: fix tuning parameter name
phy: qcom: qmp-pcie: Fix X1E80100 PCIe Gen4 PHY initialisation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fix from Vinod Koul:
- Single fix for non-continous port map programming
* tag 'soundwire-6.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: stream: fix programming slave ports for non-continous port maps
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Fix a device-stall problem in bad io-page-fault setups (faults
received from devices with no supporting domain attached).
- Context flush fix for Intel VT-d.
- Do not allow non-read+non-write mapping through iommufd as most
implementations can not handle that.
- Fix a possible infinite-loop issue in map_pages() path.
- Add Jean-Philippe as reviewer for SMMUv3 SVA support
* tag 'iommu-fixes-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
MAINTAINERS: Add Jean-Philippe as SMMUv3 SVA reviewer
iommu: Do not return 0 from map_pages if it doesn't do anything
iommufd: Do not allow creating areas without READ or WRITE
iommu/vt-d: Fix incorrect domain ID in context flush helper
iommu: Handle iommu faults for a bad iopf setup
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial device id for 6.11-rc6
Here's a new modem device id.
This one has been in linux-next with no reported issues.
* tag 'usb-serial-6.11-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add MeiG Smart SRM825L
|
|
Pull drm fixes from Dave Airlie:
"Another week, another set of GPU fixes. amdgpu and vmwgfx leading the
charge, then i915 and xe changes along with v3d and some other bits.
The TTM revert is due to some stuttering graphical apps probably due
to longer stalls while prefaulting.
Seems pretty much where I'd expect things,
ttm:
- revert prefault change, caused stutters
aperture:
- handle non-VGA devices bettter
amdgpu:
- SWSMU gaming stability fix
- SMU 13.0.7 fix
- SWSMU documentation alignment fix
- SMU 14.0.x fixes
- GC 12.x fix
- Display fix
- IP discovery fix
- SMU 13.0.6 fix
i915:
- Fix #11195: The external display connect via USB type-C dock stays
blank after re-connect the dock
- Make DSI backlight work for 2G version of Lenovo Yoga Tab 3 X90F
- Move ARL GuC firmware to correct version
xe:
- Invalidate media_gt TLBs
- Fix HWMON i1 power setup write command
vmwgfx:
- prevent unmapping active read buffers
- fix prime with external buffers
- disable coherent dumb buffers without 3d
v3d:
- disable preemption while updating GPU stats"
* tag 'drm-fixes-2024-08-30' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/hwmon: Fix WRITE_I1 param from u32 to u16
drm/v3d: Disable preemption while updating GPU stats
drm/amd/pm: Drop unsupported features on smu v14_0_2
drm/amd/pm: Add support for new P2S table revision
drm/amdgpu: support for gc_info table v1.3
drm/amd/display: avoid using null object of framebuffer
drm/amdgpu/gfx12: set UNORD_DISPATCH in compute MQDs
drm/amd/pm: update message interface for smu v14.0.2/3
drm/amdgpu/swsmu: always force a state reprogram on init
drm/amdgpu/smu13.0.7: print index for profiles
drm/amdgpu: align pp_power_profile_mode with kernel docs
drm/i915/dp_mst: Fix MST state after a sink reset
drm/xe: Invalidate media_gt TLBs
drm/i915: ARL requires a newer GSC firmware
drm/i915/dsi: Make Lenovo Yoga Tab 3 X90F DMI match less strict
video/aperture: optionally match the device in sysfb_disable()
drm/vmwgfx: Disable coherent dumb buffers without 3d
drm/vmwgfx: Fix prime with external buffers
drm/vmwgfx: Prevent unmapping active read buffers
Revert "drm/ttm: increase ttm pre-fault value to PMD size"
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A revert for a previous TTM commit causing stuttering, 3 fixes for
vmwgfx related to buffer operations, a fix for video/aperture with
non-VGA primary devices, and a preemption status fix for v3d
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829-efficient-swift-from-lemuria-f60c05@houat
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Invalidate media_gt TLBs (Brost)
- Fix HWMON i1 power setup write command (Karthik)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZtB-t5f4uXMrKgnV@intel.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Fix #11195: The external display connect via USB type-C dock stays blank after re-connect the dock
- Make DSI backlight work for 2G version of Lenovo Yoga Tab 3 X90F
. Move ARL GuC firmware to correct version
-
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZtAd8WTw1xiSu_TS@jlahtine-mobl.ger.corp.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- pt5161l: Fix invalid temperature reading of bad ADC values
- asus-ec-sensors: Remove unsupported VRM temperature from X570-E
GAMING
* tag 'hwmon-for-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pt5161l) Fix invalid temperature reading
hwmon: (asus-ec-sensors) remove VRM temp X570-E GAMING
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth, wireless and netfilter.
No known outstanding regressions.
Current release - regressions:
- wifi: iwlwifi: fix hibernation
- eth: ionic: prevent tx_timeout due to frequent doorbell ringing
Previous releases - regressions:
- sched: fix sch_fq incorrect behavior for small weights
- wifi:
- iwlwifi: take the mutex before running link selection
- wfx: repair open network AP mode
- netfilter: restore IP sanity checks for netdev/egress
- tcp: fix forever orphan socket caused by tcp_abort
- mptcp: close subflow when receiving TCP+FIN
- bluetooth: fix random crash seen while removing btnxpuart driver
Previous releases - always broken:
- mptcp: more fixes for the in-kernel PM
- eth: bonding: change ipsec_lock from spin lock to mutex
- eth: mana: fix race of mana_hwc_post_rx_wqe and new hwc response
Misc:
- documentation: drop special comment style for net code"
* tag 'net-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
nfc: pn533: Add poll mod list filling check
mailmap: update entry for Sriram Yagnaraman
selftests: mptcp: join: check re-re-adding ID 0 signal
mptcp: pm: ADD_ADDR 0 is not a new address
selftests: mptcp: join: validate event numbers
mptcp: avoid duplicated SUB_CLOSED events
selftests: mptcp: join: check re-re-adding ID 0 endp
mptcp: pm: fix ID 0 endp usage after multiple re-creations
mptcp: pm: do not remove already closed subflows
selftests: mptcp: join: no extra msg if no counter
selftests: mptcp: join: check re-adding init endp with != id
mptcp: pm: reset MPC endp ID when re-added
mptcp: pm: skip connecting to already established sf
mptcp: pm: send ACK on an active subflow
selftests: mptcp: join: check removing ID 0 endpoint
mptcp: pm: fix RM_ADDR ID for the initial subflow
mptcp: pm: reuse ID 0 after delete and re-add
net: busy-poll: use ktime_get_ns() instead of local_clock()
sctp: fix association labeling in the duplicate COOKIE-ECHO case
mptcp: pr_debug: add missing \n at the end
...
|
|
Commit 8bccf667f62a ("Input: cypress_ps2 - report timeouts when reading
command status") uncovered an existing problem with cypress_ps2 driver:
it tries waiting on a PS/2 device waitqueue without using the rest of
libps2. Unfortunately without it nobody signals wakeup for the
waiting process, and each "extended" command was timing out. But the
rest of the code simply did not notice it.
Fix this by switching from homegrown way of sending request to get
command response and reading it to standard ps2_command() which does
the right thing.
Reported-by: Woody Suwalski <terraluna977@gmail.com>
Tested-by: Woody Suwalski <terraluna977@gmail.com>
Fixes: 8bccf667f62a ("Input: cypress_ps2 - report timeouts when reading command status")
Link: https://lore.kernel.org/r/a8252e0f-dab4-ef5e-2aa1-407a6f4c7204@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
WRITE_I1 sub-command of the POWER_SETUP pcode command accepts a u16
parameter instead of u32. This change prevents potential illegal
sub-command errors.
v2: Mask uval instead of changing the prototype. (Badal)
v3: Rephrase commit message. (Badal)
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Fixes: 92d44a422d0d ("drm/xe/hwmon: Expose card reactive critical power")
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240827155301.183383-1-karthik.poosa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit a7f657097e96d8fa745c74bb1a239ebd5a8c971c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
In case of im_protocols value is 1 and tm_protocols value is 0 this
combination successfully passes the check
'if (!im_protocols && !tm_protocols)' in the nfc_start_poll().
But then after pn533_poll_create_mod_list() call in pn533_start_poll()
poll mod list will remain empty and dev->poll_mod_count will remain 0
which lead to division by zero.
Normally no im protocol has value 1 in the mask, so this combination is
not expected by driver. But these protocol values actually come from
userspace via Netlink interface (NFC_CMD_START_POLL operation). So a
broken or malicious program may pass a message containing a "bad"
combination of protocol parameter values so that dev->poll_mod_count
is not incremented inside pn533_poll_create_mod_list(), thus leading
to division by zero.
Call trace looks like:
nfc_genl_start_poll()
nfc_start_poll()
->start_poll()
pn533_start_poll()
Add poll mod list filling check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: dfccd0f58044 ("NFC: pn533: Add some polling entropy")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240827084822.18785-1-amishin@t-argos.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Regressions:
* wfx: fix for open network connection
* iwlwifi: fix for hibernate (due to fast resume feature)
* iwlwifi: fix for a few warnings that were recently added
(had previously been messages not warnings)
Previously broken:
* mwifiex: fix static structures used for per-device data
* iwlwifi: some harmless FW related messages were tagged
too high priority
* iwlwifi: scan buffers weren't checked correctly
* mac80211: SKB leak on beacon error path
* iwlwifi: fix ACPI table interop with certain BIOSes
* iwlwifi: fix locking for link selection
* mac80211: fix SSID comparison in beacon validation
* tag 'wireless-2024-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: clear trans->state earlier upon error
wifi: wfx: repair open network AP mode
wifi: mac80211: free skb on error path in ieee80211_beacon_get_ap()
wifi: iwlwifi: mvm: don't wait for tx queues if firmware is dead
wifi: iwlwifi: mvm: allow 6 GHz channels in MLO scan
wifi: iwlwifi: mvm: pause TCM when the firmware is stopped
wifi: iwlwifi: fw: fix wgds rev 3 exact size
wifi: iwlwifi: mvm: take the mutex before running link selection
wifi: iwlwifi: mvm: fix iwl_mvm_max_scan_ie_fw_cmd_room()
wifi: iwlwifi: mvm: fix iwl_mvm_scan_fits() calculation
wifi: iwlwifi: lower message level for FW buffer destination
wifi: iwlwifi: mvm: fix hibernation
wifi: mac80211: fix beacon SSID mismatch handling
wifi: mwifiex: duplicate static structs used in driver instances
====================
Link: https://patch.msgid.link/20240828100151.23662-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V soc fixes for v6.11-rc6
Prevent an erroneous unconditional report of a timeout during firmware
upload in the mpfs-auto-update driver.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-fixes-for-v6.11-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
firmware: microchip: fix incorrect error report of programming:timeout on success
Link: https://lore.kernel.org/r/20240828-fidelity-almighty-18d5434aaef0@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for v6.11
This corrects the tzmem virt-to-phys conversion, which caused issues for
the uefisecapp implementation of EFI variable access. SDM670 is excluded
from tzmem usage due to reported issues.
The SCM get wait queue context call is corrected to be marked ATOMIC and
some dead code in qseecom, following the tzmem conversion, is removed.
The memory backing command DB is remapped writecombined, to avoid XPU
violations when Linux runs without the Qualcomm hypervisor.
Two compile fixes are added for pd-mapper, and the broken reference
count is corrected, to make pd-mapper deal with remoteprocs going away.
In pmic_glink a race condition where the client callbacks might be
called before we returned the client handle is corrected. The broken conditions
for when to signal that the firmware is going down is also corrected.
In the pmic_glink UCSI driver, the ucsi_unregister() is moved out of the
pdr callback, as this is being invoked in atomic context.
Konrad's email address is updated in MAINTAINERS, and related mailmap
entries are added.
* tag 'qcom-drivers-fixes-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pd-mapper: Fix singleton refcount
firmware: qcom: tzmem: disable sdm670 platform
soc: qcom: pmic_glink: Actually communicate when remote goes down
usb: typec: ucsi: Move unregister out of atomic section
soc: qcom: pmic_glink: Fix race during initialization
firmware: qcom: qseecom: remove unused functions
firmware: qcom: tzmem: fix virtual-to-physical address conversion
firmware: qcom: scm: Mark get_wq_ctx() as atomic call
MAINTAINERS: Update Konrad Dybcio's email address
mailmap: Add an entry for Konrad Dybcio
soc: qcom: pd-mapper: mark qcom_pdm_domains as __maybe_unused
soc: qcom: cmd-db: Map shared memory as WC, not WB
soc: qcom: pd-mapper: Depend on ARCH_QCOM || COMPILE_TEST
Link: https://lore.kernel.org/r/20240826145209.1646159-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
- platform/x86/amd/pmc: AMD 1Ah model 60h series support (2nd attempt)
- asus-wmi: Prevent spurious rfkill on Asus Zenbook Duo
- x86-android-tablets: Relax DMI match to cover another model
* tag 'platform-drivers-x86-v6.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: x86-android-tablets: Make Lenovo Yoga Tab 3 X90F DMI match less strict
platform/x86: asus-wmi: Fix spurious rfkill on UX8406MA
platform/x86/amd/pmc: Extend support for PMC features on new AMD platform
platform/x86/amd/pmc: Fix SMU command submission path on new AMD platform
|
|
We forgot to disable preemption around the write_seqcount_begin/end() pair
while updating GPU stats:
[ ] WARNING: CPU: 2 PID: 12 at include/linux/seqlock.h:221 __seqprop_assert.isra.0+0x128/0x150 [v3d]
[ ] Workqueue: v3d_bin drm_sched_run_job_work [gpu_sched]
<...snip...>
[ ] Call trace:
[ ] __seqprop_assert.isra.0+0x128/0x150 [v3d]
[ ] v3d_job_start_stats.isra.0+0x90/0x218 [v3d]
[ ] v3d_bin_job_run+0x23c/0x388 [v3d]
[ ] drm_sched_run_job_work+0x520/0x6d0 [gpu_sched]
[ ] process_one_work+0x62c/0xb48
[ ] worker_thread+0x468/0x5b0
[ ] kthread+0x1c4/0x1e0
[ ] ret_from_fork+0x10/0x20
Fix it.
Cc: Maíra Canal <mcanal@igalia.com>
Cc: stable@vger.kernel.org # v6.10+
Fixes: 6abe93b621ab ("drm/v3d: Fix race-condition between sysfs/fdinfo and interrupt handler")
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Acked-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240813102505.80512-1-tursulin@igalia.com
|
|
Drop unsupported features on smu v14_0_2.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3376f922bfe070eff762164b3fc66981e3079417)
|
|
Add p2s table support for a new revision of SMUv13.0.6.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 010cc730ace807c6d267481b5fb6ff99acc35c46)
|
|
Add gc_info table v1.3 for IP discovery.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 875ff9a7ee8824200885384effa7743892a34ed6)
|
|
Instead of using state->fb->obj[0] directly, get object from framebuffer
by calling drm_gem_fb_get_obj() and return error code when object is
null to avoid using null object of framebuffer.
Fixes: 5d945cbcd4b1 ("drm/amd/display: Create a file dedicated to planes")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 73dd0ad9e5dad53766ea3e631303430116f834b3)
|
|
This needs to be set to 1 to avoid a potential deadlock in
the GC 10.x and newer. On GC 9.x and older, this needs
to be set to 0. This can lead to hangs in some mixed
graphics and compute workloads.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3575
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 40318a2406bd426c6f4591269669c04e8eda571d)
|
|
update message interface for smu v14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 01bfabc2d1d8aaffe5268f8df0843a6d916dcbaa)
|
|
Always reprogram the hardware state on init. This ensures
the PMFW state is explicitly programmed and we are not relying
on the default PMFW state.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3131
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c50fe289ed7207f71df3b5f1720512a9620e84fb)
Cc: stable@vger.kernel.org
|
|
Print the index for the profiles.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3543
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b86a6a57b8ad1699ba8b1c270a79678383baf632)
|
|
The kernel doc says you need to select manual mode to
adjust this, but the code only allows you to adjust it when
manual mode is not selected. Remove the manual mode check.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bbb05f8a9cd87f5046d05a0c596fddfb714ee457)
Cc: stable@vger.kernel.org
|
|
DW_HDMA_V0_LIE and DW_HDMA_V0_RIE are initialized as BIT(3) and BIT(4)
respectively in dw_hdma_control enum. But as per HDMA register these
bits are corresponds to LWIE and RWIE bit i.e local watermark interrupt
enable and remote watermarek interrupt enable. In linked list mode LWIE
and RWIE bits only enable the local and remote watermark interrupt.
Since the watermark interrupts are not used but enabled, this leads to
spurious interrupts getting generated. So remove the code that enables
them to avoid generating spurious watermark interrupts.
And also rename DW_HDMA_V0_LIE to DW_HDMA_V0_LWIE and DW_HDMA_V0_RIE to
DW_HDMA_V0_RWIE as there is no LIE and RIE bits in HDMA and those bits
are corresponds to LWIE and RWIE bits.
Fixes: e74c39573d35 ("dmaengine: dw-edma: Add support for native HDMA")
cc: stable@vger.kernel.org
Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/1724674261-3144-3-git-send-email-quic_msarkar@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The current logic is enabling both STOP_INT_MASK and ABORT_INT_MASK
bit. This is apparently masking those particular interrupts rather than
unmasking the same. If the interrupts are masked, they would never get
triggered.
So fix the issue by unmasking the STOP and ABORT interrupts properly.
Fixes: e74c39573d35 ("dmaengine: dw-edma: Add support for native HDMA")
cc: stable@vger.kernel.org
Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1724674261-3144-2-git-send-email-quic_msarkar@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In some cases the sink can reset itself after it was configured into MST
mode, without the driver noticing the disconnected state. For instance
the reset may happen in the middle of a modeset, or the (long) HPD pulse
generated may be not long enough for the encoder detect handler to
observe the HPD's deasserted state. In this case the sink's DPCD
register programmed to enable MST will be reset, while the driver still
assumes MST is still enabled. Detect this condition, which will tear
down and recreate/re-enable the MST topology.
v2:
- Add a code comment about adjusting the expected DP_MSTM_CTRL register
value for SST + SideBand. (Suraj, Jani)
- Print a debug message about detecting the link reset. (Jani)
- Verify the DPCD MST state only if it wasn't already determined that
the sink is disconnected.
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11195
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823162918.1211875-1-imre.deak@intel.com
(cherry picked from commit 594cf78dc36f31c0c7e0de4567e644f406d46bae)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull TPM fix from Jarkko Sakkinen:
"A bug fix for tpm_ibmvtpm driver so that it will take the bus
encryption into use"
* tag 'tpmdd-next-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: ibmvtpm: Call tpm2_sessions_init() to initialize session support
|
|
When sockfd_lookup() fails, gtp_encap_enable_socket() returns a
NULL pointer, but its callers only check for error pointers thus miss
the NULL pointer case.
Fix it by returning an error pointer with the error code carried from
sockfd_lookup().
(I found this bug during code inspection.)
Fixes: 1e3a3abd8b28 ("gtp: make GTP sockets in gtp_newlink optional")
Cc: Andreas Schultz <aschultz@tpip.net>
Cc: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://patch.msgid.link/20240825191638.146748-1-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the cited commit, bond->ipsec_lock is added to protect ipsec_list,
hence xdo_dev_state_add and xdo_dev_state_delete are called inside
this lock. As ipsec_lock is a spin lock and such xfrmdev ops may sleep,
"scheduling while atomic" will be triggered when changing bond's
active slave.
[ 101.055189] BUG: scheduling while atomic: bash/902/0x00000200
[ 101.055726] Modules linked in:
[ 101.058211] CPU: 3 PID: 902 Comm: bash Not tainted 6.9.0-rc4+ #1
[ 101.058760] Hardware name:
[ 101.059434] Call Trace:
[ 101.059436] <TASK>
[ 101.060873] dump_stack_lvl+0x51/0x60
[ 101.061275] __schedule_bug+0x4e/0x60
[ 101.061682] __schedule+0x612/0x7c0
[ 101.062078] ? __mod_timer+0x25c/0x370
[ 101.062486] schedule+0x25/0xd0
[ 101.062845] schedule_timeout+0x77/0xf0
[ 101.063265] ? asm_common_interrupt+0x22/0x40
[ 101.063724] ? __bpf_trace_itimer_state+0x10/0x10
[ 101.064215] __wait_for_common+0x87/0x190
[ 101.064648] ? usleep_range_state+0x90/0x90
[ 101.065091] cmd_exec+0x437/0xb20 [mlx5_core]
[ 101.065569] mlx5_cmd_do+0x1e/0x40 [mlx5_core]
[ 101.066051] mlx5_cmd_exec+0x18/0x30 [mlx5_core]
[ 101.066552] mlx5_crypto_create_dek_key+0xea/0x120 [mlx5_core]
[ 101.067163] ? bonding_sysfs_store_option+0x4d/0x80 [bonding]
[ 101.067738] ? kmalloc_trace+0x4d/0x350
[ 101.068156] mlx5_ipsec_create_sa_ctx+0x33/0x100 [mlx5_core]
[ 101.068747] mlx5e_xfrm_add_state+0x47b/0xaa0 [mlx5_core]
[ 101.069312] bond_change_active_slave+0x392/0x900 [bonding]
[ 101.069868] bond_option_active_slave_set+0x1c2/0x240 [bonding]
[ 101.070454] __bond_opt_set+0xa6/0x430 [bonding]
[ 101.070935] __bond_opt_set_notify+0x2f/0x90 [bonding]
[ 101.071453] bond_opt_tryset_rtnl+0x72/0xb0 [bonding]
[ 101.071965] bonding_sysfs_store_option+0x4d/0x80 [bonding]
[ 101.072567] kernfs_fop_write_iter+0x10c/0x1a0
[ 101.073033] vfs_write+0x2d8/0x400
[ 101.073416] ? alloc_fd+0x48/0x180
[ 101.073798] ksys_write+0x5f/0xe0
[ 101.074175] do_syscall_64+0x52/0x110
[ 101.074576] entry_SYSCALL_64_after_hwframe+0x4b/0x53
As bond_ipsec_add_sa_all and bond_ipsec_del_sa_all are only called
from bond_change_active_slave, which requires holding the RTNL lock.
And bond_ipsec_add_sa and bond_ipsec_del_sa are xfrm state
xdo_dev_state_add and xdo_dev_state_delete APIs, which are in user
context. So ipsec_lock doesn't have to be spin lock, change it to
mutex, and thus the above issue can be resolved.
Fixes: 9a5605505d9c ("bonding: Add struct bond_ipesc to manage SA")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20240823031056.110999-4-jianbol@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a local variable for slave->dev, to prepare for the lock change in
the next patch. There is no functionality change.
Fixes: 9a5605505d9c ("bonding: Add struct bond_ipesc to manage SA")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20240823031056.110999-3-jianbol@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add this implementation for bonding, so hardware resources can be
freed from the active slave after xfrm state is deleted. The netdev
used to invoke xdo_dev_state_free callback, is saved in the xfrm state
(xs->xso.real_dev), which is also the bond's active slave. To prevent
it from being freed, acquire netdev reference before leaving RCU
read-side critical section, and release it after callback is done.
And call it when deleting all SAs from old active real interface while
switching current active slave.
Fixes: 9a5605505d9c ("bonding: Add struct bond_ipesc to manage SA")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20240823031056.110999-2-jianbol@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge amd-pstate driver fixes for 6.11-rc6 from Mario Limonciello:
"amd-pstate fixes for 6.11-rc
- Fix to unit test coverage
- Fix bug with enabling CPPC on hetero designs
- Fix uninitialized variable"
* tag 'amd-pstate-v6.11-2024-08-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate-ut: Don't check for highest perf matching on prefcore
cpufreq/amd-pstate: Use topology_logical_package_id() instead of logical_die_id()
cpufreq: amd-pstate: Fix uninitialized variable in amd_pstate_cpu_boost_update()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix the hwirq map and pin offsets in the Qualcomm X1E80100 driver
- Fix the pin range handling in the AT91 driver so it works again
- Fix a NULL-dereference risk in pinctrl single
- Fix a serious biasing bug in the Mediatek driver
- Fix the level trigged IRQ in the StarFive JH7110
- Fix the iomux width in the Rockchip GPIO2-B pin handling
* tag 'pinctrl-v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: rockchip: correct RK3328 iomux width flag for GPIO2-B pins
pinctrl: starfive: jh7110: Correct the level trigger configuration of iev register
pinctrl: qcom: x1e80100: Fix special pin offsets
pinctrl: mediatek: common-v2: Fix broken bias-disable for PULL_PU_PD_RSEL_TYPE
pinctrl: single: fix potential NULL dereference in pcs_get_function()
pinctrl: at91: make it work with current gpiolib
pinctrl: qcom: x1e80100: Update PDC hwirq map
|
|
Commit d2add27cf2b8 ("tpm: Add NULL primary creation") introduced
CONFIG_TCG_TPM2_HMAC. When this option is enabled on ppc64 then the
following message appears in the kernel log due to a missing call to
tpm2_sessions_init().
[ 2.654549] tpm tpm0: auth session is not active
Add the missing call to tpm2_session_init() to the ibmvtpm driver to
resolve this issue.
Cc: stable@vger.kernel.org # v6.10+
Fixes: d2add27cf2b8 ("tpm: Add NULL primary creation")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Testing on LNL has shown media TLBs need to be invalidated via the GuC,
update xe_vm_invalidate_vma appropriately.
v2: Fix 2 tile case
v3: Include missing local change
Fixes: 3330361543fc ("drm/xe/lnl: Add LNL platform definition")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820160129.986889-1-matthew.brost@intel.com
(cherry picked from commit 77cc3f6c58b1b28cee73904946c46a1415187d04)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
With recent work to the doorbell workaround code a small hole was
introduced that could cause a tx_timeout. This happens if the rx
dbell_deadline goes beyond the netdev watchdog timeout set by the driver
(i.e. 2 seconds). Fix this by changing the netdev watchdog timeout to 5
seconds and reduce the max rx dbell_deadline to 4 seconds.
The test that can reproduce the issue being fixed is a multi-queue send
test via pktgen with the "burst" setting to 1. This causes the queue's
doorbell to be rung on every packet sent to the driver, which may result
in the device missing doorbells due to the high doorbell rate.
Cc: stable@vger.kernel.org
Fixes: 4ded136c78f8 ("ionic: add work item for missed-doorbell check")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20240822192557.9089-1-brett.creeley@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ARL and MTL share a single GSC firmware blob. However, ARL requires a
newer version of it.
So add differentiate of the PCI ids for ARL from MTL and create ARL as
a sub-platform of MTL. That way, all the existing workarounds and such
still treat ARL as MTL exactly as before. However, now the GSC code
can check for ARL and do an extra version check on the firmware before
committing to it.
Also, the version extraction code has various ways of failing but the
return code was being ignore and so the firmware load would attempt to
continue anyway. Fix that by propagating the return code to the next
level out.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Fixes: 213c43676beb ("drm/i915/mtl: Remove the 'force_probe' requirement for Meteor Lake")
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802031051.3816392-1-John.C.Harrison@Intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 67733d7a71503fd3e32eeada371f8aa2516c5c95)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|