| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
write$nci(r0, &(0x7f0000000740)=ANY=[@ANYBLOB="610501"], 0xf)
Syzbot constructed a write() call with a data length of 3 bytes but a count value
of 15, which passed too little data to meet the basic requirements of the function
nci_rf_intf_activated_ntf_packet().
Therefore, increasing the comparison between data length and count value to avoid
problems caused by inconsistent data length and count.
Reported-and-tested-by: [email protected]
Signed-off-by: Edward Adam Davis <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
After registering the audio component in i915_audio_component_init()
the audio driver may call i915_audio_component_get_power() via the
component ops. This could program AUD_FREQ_CNTRL with an uninitialized
value if the latter function is called before display.audio.freq_cntrl
gets initialized. The get_power() function also does a modeset which in
the above case happens too early before the initialization step and
triggers the
"Reject display access from task"
error message added by the Fixes: commit below.
Fix the above issue by registering the audio component only after the
initialization step.
Fixes: 87c1694533c9 ("drm/i915: save AUD_FREQ_CNTRL state at audio domain suspend")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10291
Cc: [email protected] # v5.5+
Signed-off-by: Imre Deak <[email protected]>
Reviewed-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit fdd0b80172758ce284f19fa8a26d90c61e4371d2)
Signed-off-by: Jani Nikula <[email protected]>
|
|
In some scenarios, the DPT object gets shrunk but
the actual framebuffer did not and thus its still
there on the DPT's vm->bound_list. Then it tries to
rewrite the PTEs via a stale CPU mapping. This causes panic.
Cc: [email protected]
Reported-by: Shawn Lee <[email protected]>
Fixes: 0dc987b699ce ("drm/i915/display: Add smem fallback allocation for dpt")
Signed-off-by: Vidya Srinivas <[email protected]>
[vsyrjala: Add TODO comment]
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 51064d471c53dcc8eddd2333c3f1c1d9131ba36c)
Signed-off-by: Jani Nikula <[email protected]>
|
|
The whole point of the previous fixes has been to change the CCS
hardware configuration to generate only one stream available to
the compute users. We did this by changing the info.engine_mask
that is set during device probe, reset during the detection of
the fused engines, and finally reset again when choosing the CCS
mode.
We can't use the engine_mask variable anymore, as with the
current configuration, it imposes only one CCS no matter what the
hardware configuration is.
Before changing the engine_mask for the third time, save it and
use it for calculating the CCS mode.
After the previous changes, the user reported a performance drop
to around 1/4. We have tested that the compute operations, with
the current patch, have improved by the same factor.
Fixes: 6db31251bb26 ("drm/i915/gt: Enable only one CCS for compute workload")
Signed-off-by: Andi Shyti <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Gnattu OC <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Matt Roper <[email protected]>
Tested-by: Jian Ye <[email protected]>
Reviewed-by: Umesh Nerlige Ramappa <[email protected]>
Tested-by: Gnattu OC <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit a09d2327a9ba8e3f5be238bc1b7ca2809255b464)
Signed-off-by: Jani Nikula <[email protected]>
|
|
Fix sparse warning regarding symbol 'sw43408_backlight_ops' not being
declared.
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Reviewed-by: Neil Armstrong <[email protected]>
Fixes: 069a6c0e94f9 ("drm: panel: Add LG sw43408 panel driver")
Reviewed-by: Marijn Suijten <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
|
|
Commit 8d4ba9fc1c6c ("drm/i915/selftests: Pick correct caching mode.")
was not complete as for non LLC sharing platforms cpu read can happen
from LLC which probably doesn't have the latest changes made by GPU.
Cc: Andi Shyti <[email protected]>
Cc: Janusz Krzysztofik <[email protected]>
Cc: Jonathan Cavitt <[email protected]>
Fixes: 8d4ba9fc1c6c ("drm/i915/selftests: Pick correct caching mode.")
Reviewed-by: Jonathan Cavitt <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Nirmoy Das <[email protected]>
(cherry picked from commit 007ed70831426d4cc108d879d688de6b8e3e6d45)
Signed-off-by: Jani Nikula <[email protected]>
|
|
This panel driver uses DSC PPS functions and as such depends on the
DRM_DISPLAY_DP_HELPER. Select this symbol to make required functions
available to the driver.
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Fixes: 069a6c0e94f9 ("drm: panel: Add LG sw43408 panel driver")
Reviewed-by: Neil Armstrong <[email protected]>
Reviewed-by: Marijn Suijten <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
|
|
With gcc-7 and earlier, there are lots of warnings like
In file included from <command-line>:0:0:
In function '__guc_context_policy_add_priority.isra.66',
inlined from '__guc_context_set_prio.isra.67' at drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:3292:3,
inlined from 'guc_context_set_prio' at drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:3320:2:
include/linux/compiler_types.h:399:38: error: call to '__compiletime_assert_631' declared with attribute error: FIELD_PREP: mask is not constant
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^
...
drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:2422:3: note: in expansion of macro 'FIELD_PREP'
FIELD_PREP(GUC_KLV_0_KEY, GUC_CONTEXT_POLICIES_KLV_ID_##id) | \
^~~~~~~~~~
Make sure that GUC_KLV_0_KEY is an unsigned value to avoid the warning.
Fixes: 77b6f79df66e ("drm/i915/guc: Update to GuC version 69.0.3")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Michal Wajdeczko <[email protected]>
Signed-off-by: Julia Filipchuk <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 364e039827ef628c650c21c1afe1c54d9c3296d9)
Signed-off-by: Jani Nikula <[email protected]>
|
|
The breadcrumbs use a GT wakeref for guarding the interrupt, but are
disarmed during release of the engine wakeref. This leaves a hole where
we may attach a breadcrumb just as the engine is parking (after it has
parked its breadcrumbs), execute the irq worker with some signalers still
attached, but never be woken again.
That issue manifests itself in CI with IGT runner timeouts while tests
are waiting indefinitely for release of all GT wakerefs.
<6> [209.151778] i915: Running live_engine_pm_selftests/live_engine_busy_stats
<7> [209.231628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_5
<7> [209.231816] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4
<7> [209.231944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3
<7> [209.232056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [209.232166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [209.232270] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [209.232368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<4> [299.356116] [IGT] Inactivity timeout exceeded. Killing the current test with SIGQUIT.
...
<6> [299.356526] sysrq: Show State
...
<6> [299.373964] task:i915_selftest state:D stack:11784 pid:5578 tgid:5578 ppid:873 flags:0x00004002
<6> [299.373967] Call Trace:
<6> [299.373968] <TASK>
<6> [299.373970] __schedule+0x3bb/0xda0
<6> [299.373974] schedule+0x41/0x110
<6> [299.373976] intel_wakeref_wait_for_idle+0x82/0x100 [i915]
<6> [299.374083] ? __pfx_var_wake_function+0x10/0x10
<6> [299.374087] live_engine_busy_stats+0x9b/0x500 [i915]
<6> [299.374173] __i915_subtests+0xbe/0x240 [i915]
<6> [299.374277] ? __pfx___intel_gt_live_setup+0x10/0x10 [i915]
<6> [299.374369] ? __pfx___intel_gt_live_teardown+0x10/0x10 [i915]
<6> [299.374456] intel_engine_live_selftests+0x1c/0x30 [i915]
<6> [299.374547] __run_selftests+0xbb/0x190 [i915]
<6> [299.374635] i915_live_selftests+0x4b/0x90 [i915]
<6> [299.374717] i915_pci_probe+0x10d/0x210 [i915]
At the end of the interrupt worker, if there are no more engines awake,
disarm the breadcrumb and go to sleep.
Fixes: 9d5612ca165a ("drm/i915/gt: Defer enabling the breadcrumb interrupt to after submission")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/10026
Signed-off-by: Chris Wilson <[email protected]>
Cc: Andrzej Hajda <[email protected]>
Cc: <[email protected]> # v5.12+
Signed-off-by: Janusz Krzysztofik <[email protected]>
Acked-by: Nirmoy Das <[email protected]>
Reviewed-by: Andrzej Hajda <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit fbad43eccae5cb14594195c20113369aabaa22b5)
Signed-off-by: Jani Nikula <[email protected]>
|
|
This reverts commit 1f33dc0c1189efb9ae19c6fc22b64dd3e26261fb.
There was a patch supposed to fix an issue of illegal attempts to free a
still active i915 VMA object when parking a GT believed to be idle,
reported by CI on 2-GT Meteor Lake. As a solution, an extra wakeref for
a Primary GT was acquired from i915_gem_do_execbuffer() -- see commit
f56fe3e91787 ("drm/i915: Fix a VMA UAF for multi-gt platform").
However, that fix occurred insufficient -- the issue was still reported by
CI. That wakeref was released on exit from i915_gem_do_execbuffer(), then
potentially before completion of the request and deactivation of its
associated VMAs. Moreover, CI reports indicated that single-GT platforms
also suffered sporadically from the same race.
Since that issue was fixed by another commit f3c71b2ded5c ("drm/i915/vma:
Fix UAF on destroy against retire race"), the changes introduced by that
insufficient fix were dropped as no longer useful. However, that series
resulted in another VMA UAF scenario now being triggered in CI.
<4> [260.290809] ------------[ cut here ]------------
<4> [260.290988] list_del corruption. prev->next should be ffff888118c5d990, but was ffff888118c5a510. (prev=ffff888118c5a510)
<4> [260.291004] WARNING: CPU: 2 PID: 1143 at lib/list_debug.c:62 __list_del_entry_valid_or_report+0xb7/0xe0
..
<4> [260.291055] CPU: 2 PID: 1143 Comm: kms_plane Not tainted 6.9.0-rc2-CI_DRM_14524-ga25d180c6853+ #1
<4> [260.291058] Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024
<4> [260.291060] RIP: 0010:__list_del_entry_valid_or_report+0xb7/0xe0
...
<4> [260.291087] Call Trace:
<4> [260.291089] <TASK>
<4> [260.291124] i915_vma_reopen+0x43/0x80 [i915]
<4> [260.291298] eb_lookup_vmas+0x9cb/0xcc0 [i915]
<4> [260.291579] i915_gem_do_execbuffer+0xc9a/0x26d0 [i915]
<4> [260.291883] i915_gem_execbuffer2_ioctl+0x123/0x2a0 [i915]
...
<4> [260.292301] </TASK>
...
<4> [260.292506] ---[ end trace 0000000000000000 ]---
<4> [260.292782] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6ca3: 0000 [#1] PREEMPT SMP NOPTI
<4> [260.303575] CPU: 2 PID: 1143 Comm: kms_plane Tainted: G W 6.9.0-rc2-CI_DRM_14524-ga25d180c6853+ #1
<4> [260.313851] Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024
<4> [260.326359] RIP: 0010:eb_validate_vmas+0x114/0xd80 [i915]
...
<4> [260.428756] Call Trace:
<4> [260.431192] <TASK>
<4> [639.283393] i915_gem_do_execbuffer+0xd05/0x26d0 [i915]
<4> [639.305245] i915_gem_execbuffer2_ioctl+0x123/0x2a0 [i915]
...
<4> [639.411134] </TASK>
...
<4> [639.449979] ---[ end trace 0000000000000000 ]---
We defer actually closing, unbinding and destroying a VMA until next idle
point, or until the object is freed in the meantime. By postponing the
unbind, we allow for the VMA to be reopened by the client, avoiding the
work required to rebind the VMA.
Starting from commit b0647a5e79b1 ("drm/i915: Avoid live-lock with
i915_vma_parked()"), we assume that as long as a GT is held idle, no VMA
would be reopened while we destroy them. That assumption is no longer
true in multi-GT configurations, where a VMA we reopen may be handled by a
GT different from the one that we already keep active via its engine while
we set up an execbuf request.
Restoring the extra GT0 PM wakeref removed from i915_gem_do_execbuffer()
processing path seems to fix this issue.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10608
Signed-off-by: Janusz Krzysztofik <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Nirmoy Das <[email protected]>
Reviewed-by: Nirmoy Das <[email protected]>
Fixes: 1f33dc0c1189 ("drm/i915: Remove extra multi-gt pm-references")
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
(cherry picked from commit 749670a58d935303ad1ce529acc73f12de25832e)
Signed-off-by: Jani Nikula <[email protected]>
|
|
Commit ec144244a43f ("drm/gem-shmem: Acquire reservation lock in GEM
pin/unpin callbacks") moved locking DRM object's dma reservation to
drm_gem_shmem_object_pin, and made drm_gem_shmem_pin_locked public, so
we need to make sure the not-imported check warning is also added to
the latter.
Cc: Thomas Zimmermann <[email protected]>
Cc: Dmitry Osipenko <[email protected]>
Cc: Boris Brezillon <[email protected]>
Fixes: a78027847226 ("drm/gem: Acquire reservation lock in drm_gem_{pin/unpin}()")
Signed-off-by: Adrián Larumbe <[email protected]>
Reviewed-by: Boris Brezillon <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Commit a78027847226 ("drm/gem: Acquire reservation lock in
drm_gem_{pin/unpin}()") moved locking the DRM object's dma reservation to
drm_gem_pin(), but Lima's pin callback kept calling drm_gem_shmem_pin,
which also tries to lock the same dma_resv, leading to a double lock
situation.
As was already done for Panfrost in the previous commit, fix it by
replacing drm_gem_shmem_pin() with its locked variant.
Cc: Thomas Zimmermann <[email protected]>
Cc: Dmitry Osipenko <[email protected]>
Cc: Boris Brezillon <[email protected]>
Cc: Steven Price <[email protected]>
Fixes: a78027847226 ("drm/gem: Acquire reservation lock in drm_gem_{pin/unpin}()")
Signed-off-by: Adrián Larumbe <[email protected]>
Reviewed-by: Boris Brezillon <[email protected]>
Tested-by: Val Packett <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
When Panfrost must pin an object that is being prepared a dma-buf
attachment for on behalf of another driver, the core drm gem object pinning
code already takes a lock on the object's dma reservation.
However, Panfrost GEM object's pinning callback would eventually try taking
the lock on the same dma reservation when delegating pinning of the object
onto the shmem subsystem, which led to a deadlock.
This can be shown by enabling CONFIG_DEBUG_WW_MUTEX_SLOWPATH, which throws
the following recursive locking situation:
weston/3440 is trying to acquire lock:
ffff000000e235a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_gem_shmem_pin+0x34/0xb8 [drm_shmem_helper]
but task is already holding lock:
ffff000000e235a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_gem_pin+0x2c/0x80 [drm]
Fix it by replacing drm_gem_shmem_pin with its locked version, as the lock
had already been taken by drm_gem_pin().
Cc: Thomas Zimmermann <[email protected]>
Cc: Dmitry Osipenko <[email protected]>
Cc: Boris Brezillon <[email protected]>
Cc: Steven Price <[email protected]>
Fixes: a78027847226 ("drm/gem: Acquire reservation lock in drm_gem_{pin/unpin}()")
Signed-off-by: Adrián Larumbe <[email protected]>
Reviewed-by: Boris Brezillon <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
v6.10-rc1 is released, forward from v6.9
Signed-off-by: Maarten Lankhorst <[email protected]>
|
|
In nvmet_sq_destroy we capture sq->ctrl early and if it is non-NULL we
know that a ctrl was allocated (in the admin connect request handler)
and we need to release pending AERs, clear ctrl->sqs and sq->ctrl
(for nvme-loop primarily), and drop the final reference on the ctrl.
However, a small window is possible where nvmet_sq_destroy starts (as
a result of the client giving up and disconnecting) concurrently with
the nvme admin connect cmd (which may be in an early stage). But *before*
kill_and_confirm of sq->ref (i.e. the admin connect managed to get an sq
live reference). In this case, sq->ctrl was allocated however after it was
captured in a local variable in nvmet_sq_destroy.
This prevented the final reference drop on the ctrl.
Solve this by re-capturing the sq->ctrl after all inflight request has
completed, where for sure sq->ctrl reference is final, and move forward
based on that.
This issue was observed in an environment with many hosts connecting
multiple ctrls simoutanuosly, creating a delay in allocating a ctrl
leading up to this race window.
Reported-by: Alex Turin <[email protected]>
Signed-off-by: Sagi Grimberg <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
The nvme pci driver synchronizes with all the namespace queues during a
reset to ensure that there's no pending timeout work.
Meanwhile the timeout work potentially iterates those same namespaces to
freeze their queues.
Each of those namespace iterations use the same read lock. If a write
lock should somehow get between the synchronize and freeze steps, then
forward progress is deadlocked.
We had been relying on the nvme controller state machine to ensure the
reset work wouldn't conflict with timeout work. That guarantee may be a
bit fragile to rely on, so iterate the namespace lists without taking
potentially circular locks, as reported by lockdep.
Link: https://lore.kernel.org/all/20220930001943.zdbvolc3gkekfmcv@shindev/
Reported-by: Shinichiro Kawasaki <[email protected]>
Tested-by: Shinichiro Kawasaki <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
The start counter for FT1 filter is wrongly set to 0 in the driver.
FT1 is used for source address violation (SAV) check and source address
starts at Byte 6 not Byte 0. Fix this by changing start counter to
ETH_ALEN in icssg_ft1_set_mac_addr().
Fixes: e9b4ece7d74b ("net: ti: icssg-prueth: Add Firmware config and classification APIs.")
Signed-off-by: MD Danish Anwar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
In __bch_bucket_alloc_set() the lines after lable 'err:' indeed do
nothing useful after multiple cache devices are removed from bcache
code. This cleanup patch drops the useless code to save a bit CPU
cycles.
Signed-off-by: Coly Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
If there are extreme heavy write I/O continuously hit on relative small
cache device (512GB in my testing), it is possible to make counter
c->gc_stats.in_use continue to increase and exceed CUTOFF_CACHE_ADD.
If 'c->gc_stats.in_use > CUTOFF_CACHE_ADD' happens, all following write
requests will bypass the cache device because check_should_bypass()
returns 'true'. Because all writes bypass the cache device, counter
c->sectors_to_gc has no chance to be negative value, and garbage
collection thread won't be waken up even the whole cache becomes clean
after writeback accomplished. The aftermath is that all write I/Os go
directly into backing device even the cache device is clean.
To avoid the above situation, this patch uses a quite conservative way
to fix: if 'c->gc_stats.in_use > CUTOFF_CACHE_ADD' happens, only wakes
up garbage collection thread when the whole cache device is clean.
Before the fix, the writes-always-bypass situation happens after 10+
hours write I/O pressure on 512GB Intel optane memory which acts as
cache device. After this fix, such situation doesn't happen after 36+
hours testing.
Signed-off-by: Coly Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Currently, if the gc is running, when the allocator found free_inc
is empty, allocator has to wait the gc finish. Before that, the
IO is blocked.
But actually, there would be some buckets is reclaimable before gc,
and gc will never mark this kind of bucket to be unreclaimable.
So we can put these buckets into free_inc in gc running to avoid
IO being blocked.
Signed-off-by: Dongsheng Yang <[email protected]>
Signed-off-by: Mingzhe Zou <[email protected]>
Signed-off-by: Coly Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
sd can set a max_sectors value that is lower than the max_hw_sectors
limit based on the block limits VPD page. While this is rather unusual,
it used to work until the max_user_sectors field was split out to cleanly
deal with conflicting hardware and user limits when the hardware limit
changes. Also set max_user_sectors to ensure the limit can properly be
stacked.
Fixes: 4f563a64732d ("block: add a max_user_discard_sectors queue limit")
Reported-by: Mike Snitzer <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Mike Snitzer <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
When changing the maximum number of open zones, print that number
instead of the total number of zones.
Fixes: dc4d137ee3b7 ("null_blk: add support for max open/active zone limit for zoned devices")
Cc: [email protected]
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Niklas Cassel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
devm_of_regulator_put_matches is called
In this patch, a software bug has been fixed.
rtq2208_ldo_match is no longer a local variable.
It prevents invalid memory access when devm_of_regulator_put_matches
is called.
Signed-off-by: Alina Yu <[email protected]>
Link: https://msgid.link/r/4ce8c4f16f1cf3aa4e5f36c0694dd3c5ccf3cd1c.1716870419.git.alina_yu@richtek.com
Signed-off-by: Mark Brown <[email protected]>
|
|
Given the not fully root caused performance issues on non-x86 platforms,
enable the feature by default only for x86-64. That is the platform it
brings the most value and has gone most of the QA. Can be reconsidered
later and can be obviously opt-in enabled too on any arch.
Link: https://lore.kernel.org/linux-integrity/[email protected]/#t
Signed-off-by: Jarkko Sakkinen <[email protected]>
|
|
Rename and document TPM2_OA_TMPL, as originally requested in the patch
set review, but left unaddressed without any appropriate reasoning. The
new name is TPM2_OA_NULL_KEY, has a documentation and is local only to
tpm2-sessions.c.
Link: https://lore.kernel.org/linux-integrity/ddbeb8111f48a8ddb0b8fca248dff6cc9d7079b2.camel@HansenPartnership.com/
Link: https://lore.kernel.org/linux-integrity/CZCKTWU6ZCC9.2UTEQPEVICYHL@suppilovahvero/
Signed-off-by: Jarkko Sakkinen <[email protected]>
|
|
With only single call site, this makes no sense (slipped out of the
radar during the review). Open code and document the action directly
to the site, to make it more readable.
Fixes: 1b6d7f9eb150 ("tpm: add session encryption protection to tpm2_get_random()")
Signed-off-by: Jarkko Sakkinen <[email protected]>
|
|
The TPM SPI transfer mechanism uses MAX_SPI_FRAMESIZE for computing the
maximum transfer length and the size of the transfer buffer. As such, it
does not account for the 4 bytes of header that prepends the SPI data
frame. This can result in out-of-bounds accesses and was confirmed with
KASAN.
Introduce SPI_HDRSIZE to account for the header and use to allocate the
transfer buffer.
Fixes: a86a42ac2bd6 ("tpm_tis_spi: Add hardware wait polling")
Signed-off-by: Matthew R. Ochs <[email protected]>
Tested-by: Carol Soto <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
|
|
Release the submission_state lock if alloc_guc_id() fails.
v2: Add Fixes tag and CC stable kernel
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: <[email protected]> # v6.8+
Signed-off-by: Niranjana Vishwanathapura <[email protected]>
Reviewed-by: Nirmoy Das <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
Signed-off-by: José Roberto de Souza <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 40672b792a36894aff3a337b695f6136ee6ac5d4)
Signed-off-by: Thomas Hellström <[email protected]>
|
|
The GuC context scheduling queue is 2 entires deep, thus it is possible
for a migration job to be stuck behind a fault if migration exec queue
shares engines with user jobs. This can deadlock as the migrate exec
queue is required to service page faults. Avoid deadlock by only using
reserved BCS instances for usm migrate exec queue.
Fixes: a043fbab7af5 ("drm/xe/pvc: Use fast copy engines as migrate engine on PVC")
Cc: Matt Roper <[email protected]>
Cc: Niranjana Vishwanathapura <[email protected]>
Signed-off-by: Matthew Brost <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Brian Welty <[email protected]>
(cherry picked from commit 04f4a70a183a688a60fe3882d6e4236ea02cfc67)
Signed-off-by: Thomas Hellström <[email protected]>
|
|
Polling is initially attempted with timeout_base_ms enabled for
preemption, and if it exceeds this timeframe, another attempt is made
without preemption, allowing an additional 50 ms before timing out.
v2
- Rebase
v3
- Move warnings to separate patch (Lucas)
Cc: Lucas De Marchi <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Signed-off-by: Himal Prasad Ghimiray <[email protected]>
Fixes: 7dc9b92dcfef ("drm/xe: Remove i915_utils dependency from xe_pcode.")
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
(cherry picked from commit c81858eb52266b3d6ba28ca4f62a198231a10cdc)
Signed-off-by: Thomas Hellström <[email protected]>
|
|
The ice_vsi_add_vlan() function is used to add a VLAN filter for the target
VSI. This function prepares a filter in the switch table for the given VSI.
If it succeeds, the vsi->num_vlan counter is incremented.
It is not considered an error to add a VLAN which already exists in the
switch table, so the function explicitly checks and ignores -EEXIST. The
vsi->num_vlan counter is still incremented.
This seems incorrect, as it means we can double-count in the case where the
same VLAN is added twice by the caller. The actual table will have one less
filter than the count.
The ice_vsi_del_vlan() function similarly checks and handles the -ENOENT
condition for when deleting a filter that doesn't exist. This flow only
decrements the vsi->num_vlan if it actually deleted a filter.
The vsi->num_vlan counter is used only in a few places, primarily related
to tracking the number of non-zero VLANs. If the vsi->num_vlans gets out of
sync, then ice_vsi_num_non_zero_vlans() will incorrectly report more VLANs
than are present, and ice_vsi_has_non_zero_vlans() could return true
potentially in cases where there are only VLAN 0 filters left.
Fix this by only incrementing the vsi->num_vlan in the case where we
actually added an entry, and not in the case where the entry already
existed.
Fixes: a1ffafb0b4a4 ("ice: Support configuring the device to Double VLAN Mode")
Signed-off-by: Jacob Keller <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/20240523-net-2024-05-23-intel-net-fixes-v1-2-17a923e0bb5f@intel.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Currently, idpf enables NAPI and interrupts prior to allocating Rx
buffers.
This may lead to frame loss (there are no buffers to place incoming
frames) and even crashes on quick ifup-ifdown. Interrupts must be
enabled only after all the resources are here and available.
Split interrupt init into two phases: initialization and enabling,
and perform the second only after the queues are fully initialized.
Note that we can't just move interrupt initialization down the init
process, as the queues must have correct a ::q_vector pointer set
and NAPI already added in order to allocate buffers correctly.
Also, during the deinit process, disable HW interrupts first and
only then disable NAPI. Otherwise, there can be a HW event leading
to napi_schedule(), but the NAPI will already be unavailable.
Fixes: d4d558718266 ("idpf: initialize interrupts and enable vport")
Reported-by: Michal Kubiak <[email protected]>
Reviewed-by: Wojciech Drewek <[email protected]>
Signed-off-by: Alexander Lobakin <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Krishneil Singh <[email protected]>
Signed-off-by: Jacob Keller <[email protected]>
Link: https://lore.kernel.org/r/20240523-net-2024-05-23-intel-net-fixes-v1-1-17a923e0bb5f@intel.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When the interrupt is enabled, the function lan8841_config_intr tries to
clear any pending interrupts by reading the interrupt status, then
checks the return value for errors and then continue to enable the
interrupt. It has been seen that once the system gets out of sleep mode,
the interrupt status has the value 0x400 meaning that the PHY detected
that the link was in low power. That is correct value but the problem is
that the check is wrong. We try to check for errors but we return an
error also in this case which is not an error. Therefore fix this by
returning only when there is an error.
Fixes: a8f1a19d27ef ("net: micrel: Add support for lan8841 PHY")
Signed-off-by: Horatiu Vultur <[email protected]>
Reviewed-by: Suman Ghosh <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Russell King (Oracle) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When fec_probe() fails or fec_drv_remove() needs to release the
fec queue and remove a NAPI context, therefore add a function
corresponding to fec_enet_init() and call fec_enet_deinit() which
does the opposite to release memory and remove a NAPI context.
Fixes: 59d0f7465644 ("net: fec: init multi queue date structure")
Signed-off-by: Xiaolei Wang <[email protected]>
Reviewed-by: Wei Fang <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-05-27
We've added 15 non-merge commits during the last 7 day(s) which contain
a total of 18 files changed, 583 insertions(+), 55 deletions(-).
The main changes are:
1) Fix broken BPF multi-uprobe PID filtering logic which filtered by thread
while the promise was to filter by process, from Andrii Nakryiko.
2) Fix the recent influx of syzkaller reports to sockmap which triggered
a locking rule violation by performing a map_delete, from Jakub Sitnicki.
3) Fixes to netkit driver in particular on skb->pkt_type override upon pass
verdict, from Daniel Borkmann.
4) Fix an integer overflow in resolve_btfids which can wrongly trigger build
failures, from Friedrich Vock.
5) Follow-up fixes for ARC JIT reported by static analyzers,
from Shahab Vahedi.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Cover verifier checks for mutating sockmap/sockhash
Revert "bpf, sockmap: Prevent lock inversion deadlock in map delete elem"
bpf: Allow delete from sockmap/sockhash only if update is allowed
selftests/bpf: Add netkit test for pkt_type
selftests/bpf: Add netkit tests for mac address
netkit: Fix pkt_type override upon netkit pass verdict
netkit: Fix setting mac address in l2 mode
ARC, bpf: Fix issues reported by the static analyzers
selftests/bpf: extend multi-uprobe tests with USDTs
selftests/bpf: extend multi-uprobe tests with child thread case
libbpf: detect broken PID filtering logic for multi-uprobe
bpf: remove unnecessary rcu_read_{lock,unlock}() in multi-uprobe attach logic
bpf: fix multi-uprobe PID filtering logic
bpf: Fix potential integer overflow in resolve_btfids
MAINTAINERS: Add myself as reviewer of ARM64 BPF JIT
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When powering on a null_blk device that is not already on, the return
value ret that is initialized to be count is reused to check the return
value of null_add_dev(), leading to nullb_device_power_store() to return
null_add_dev() return value (0 on success) instead of "count".
So make sure to set ret to be equal to count when there are no errors.
Fixes: a2db328b0839 ("null_blk: fix null-ptr-dereference while configuring 'power' and 'submit_queues'")
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Yu Kuai <[email protected]>
Reviewed-by: Kanchan Joshi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fix from Ulf Hansson:
- Fix regression in gpcv2 PM domain for i.MX8
* tag 'pmdomain-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: imx: gpcv2: Add delay after power up handshake
|
|
Don't stuff the values directly into the queue without any
synchronization, but instead delay applying the queue limits in
the caller and let dm_set_zones_restrictions work on the limit
structure.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Fold it into the only caller in preparation to changes in the
queue limits setup.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Mike Snitzer <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Keep it together with the rest of the zoned code.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
kthread creation may possibly fail inside race_signal_callback(). In
such a case stop the already started threads, put the already taken
references to them and return with error code.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 2989f6451084 ("dma-buf: Add selftests for dma-fence")
Cc: [email protected]
Signed-off-by: Fedor Pchelkin <[email protected]>
Reviewed-by: T.J. Mercier <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Christian König <[email protected]>
|
|
Trying to build parisc:allmodconfig with gcc 12.x or later results
in the following build error.
drivers/gpu/drm/nouveau/nvif/object.c: In function 'nvif_object_mthd':
drivers/gpu/drm/nouveau/nvif/object.c:161:9: error:
'memcpy' accessing 4294967264 or more bytes at offsets 0 and 32 overlaps 6442450881 bytes at offset -2147483617 [-Werror=restrict]
161 | memcpy(data, args->mthd.data, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/nouveau/nvif/object.c: In function 'nvif_object_ctor':
drivers/gpu/drm/nouveau/nvif/object.c:298:17: error:
'memcpy' accessing 4294967240 or more bytes at offsets 0 and 56 overlaps 6442450833 bytes at offset -2147483593 [-Werror=restrict]
298 | memcpy(data, args->new.data, size);
gcc assumes that 'sizeof(*args) + size' can overflow, which would result
in the problem.
The problem is not new, only it is now no longer a warning but an error
since W=1 has been enabled for the drm subsystem and since Werror is
enabled for test builds.
Rearrange arithmetic and use check_add_overflow() for validating the
allocation size to avoid the overflow. While at it, split assignments
out of if conditions.
Fixes: a61ddb4393ad ("drm: enable (most) W=1 warnings by default across the subsystem")
Cc: Javier Martinez Canillas <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Cc: Danilo Krummrich <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Christophe JAILLET <[email protected]>
Cc: Joe Perches <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Danilo Krummrich <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
LED Select (LED_SEL) bit in the LED General Purpose IO Configuration
register is used to determine the functionality of external LED pins
(Speed Indicator, Link and Activity Indicator, Full Duplex Link
Indicator). The default value for this bit is 0 when no EEPROM is
present. If a EEPROM is present, the default value is the value of the
LED Select bit in the Configuration Flags of the EEPROM. A USB Reset or
Lite Reset (LRST) will cause this bit to be restored to the image value
last loaded from EEPROM, or to be set to 0 if no EEPROM is present.
While configuring the dual purpose GPIO/LED pins to LED outputs in the
LED General Purpose IO Configuration register, the LED_SEL bit is changed
as 0 and resulting the configured value from the EEPROM is cleared. The
issue is fixed by using read-modify-write approach.
Fixes: f293501c61c5 ("smsc95xx: configure LED outputs")
Signed-off-by: Parthiban Veerasooran <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Woojung Huh <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
There are two type of classes. "Leaf classes" that are the
bottom of the class hierarchy. "Inner classes" that are neither
the root class nor leaf classes. QoS rules can only specify leaf
classes as targets for traffic.
Root
/ \
/ \
1 2
/\
/ \
4 5
classes 1,4 and 5 are leaf classes.
class 2 is a inner class.
When a leaf class made as inner, or vice versa, resources associated
with send queue (send queue buffers and transmit schedulers) are not
getting freed.
Fixes: 5e6808b4c68d ("octeontx2-pf: Add support for HTB offload")
Signed-off-by: Hariprasad Kelam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The "EZpad 6s Pro" uses the same touchscreen as the "EZpad 6 Pro B",
unlike the "Ezpad 6 Pro" which has its own touchscreen.
Signed-off-by: hmtheboy154 <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
This is a tablet created by GlobalSpace Technologies Limited
which uses an Intel Atom x5-Z8300, 4GB of RAM & 64GB of storage.
Link: https://web.archive.org/web/20171102141952/http://globalspace.in/11.6-device.html
Signed-off-by: hmtheboy154 <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
properties from cmdline
On x86/ACPI platforms touchscreens mostly just work without needing any
device/model specific configuration. But in some cases (mostly with Silead
and Goodix touchscreens) it is still necessary to manually specify various
touchscreen-properties on a per model basis.
touchscreen_dmi is a special place for DMI quirks for this, but it can be
challenging for users to figure out the right property values, especially
for Silead touchscreens where non of these can be read back from
the touchscreen-controller.
ATM users can only test touchscreen properties by editing touchscreen_dmi.c
and then building a completely new kernel which makes it unnecessary
difficult for users to test and submit properties when necessary for their
laptop / tablet model.
Add support for specifying properties on the kernel commandline to allow
users to easily figure out the right settings. See the added documentation
in kernel-parameters.txt for the commandline syntax.
Cc: Gregor Riepl <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Now that drivers/platform/x86/thinkpad_acpi.c uses
sparse_keymap_report_event(), it must select INPUT_SPARSEKMAP in its
Kconfig option otherwise the build fails with:
ld: vmlinux.o: in function `tpacpi_input_send_key':
thinkpad_acpi.c:(.text+0xd4d27f): undefined reference to `sparse_keymap_report_event'
ld: vmlinux.o: in function `hotkey_init':
thinkpad_acpi.c:(.init.text+0x66cb6): undefined reference to `sparse_keymap_setup'
Fixes: 42f7b965de9d ("platform/x86: thinkpad_acpi: Switch to using sparse-keymap helpers")
Signed-off-by: Steven Rostedt (Google) <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
|
|
Since the x86-android-tablets now calls devm_led_classdev_register_ext()
it needs to select LEDS_CLASS as well as LEDS_CLASS' NEW_LEDS dependency.
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
In tpmi_sst_dev_remove(), tpmi_sst is dereferenced after being freed.
Fix this by reordering the kfree() post the dereference.
Fixes: 9d1d36268f3d ("platform/x86: ISST: Support partitioned systems")
Signed-off-by: Harshit Mogalapalli <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Acked-by: Srinivas Pandruvada <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
|