aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2018-11-05drm/i915/icl: Configure MG PHY gating for HDMI ports tooImre Deak3-68/+70
The MG PHY clock gating needs to be configured for Type C static/fixed/legacy HDMI ports the same way it's configured for Type C static/fixed/legacy and aternate mode DP ports, fix this. Bspec: 4232, 21735 Cc: Vandita Kulkarni <[email protected]> Cc: Paulo Zanoni <[email protected]> Cc: Maarten Lankhorst <[email protected]> Cc: Manasi Navare <[email protected]> Signed-off-by: Imre Deak <[email protected]> Reviewed-by: José Roberto de Souza <[email protected]> Tested-by: José Roberto de Souza <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-05drm/vgem: create a render node for vgemEmil Velikov1-1/+2
VGEM doesn't do anything modeset specific, so in a way exposing a primary node is 'wrong'. At the same time, we extensively use if for creating dumb buffers, fences, prime fd <> handle imports/exports. To the point that we explicitly annotate the vgem fence ioctls as DRM_RENDER_ALLOW and have an IGT test which opens the render node. close(drm_open_driver_render(DRIVER_VGEM)) Better late than never, let's flip the switch. Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Signed-off-by: Emil Velikov <[email protected]> Acked-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-05drm: sun4i: add support for H6 TCON TOPIcenowy Zheng1-0/+8
The TCON TOP on Allwinner H6 SoC is a cut down version of the R40 TCON TOP, which dropped TCON_TV1 and DSI (which do not exist on H6). Add support for it. Signed-off-by: Icenowy Zheng <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-05drm: sun4i: add quirks for TCON TOPIcenowy Zheng1-9/+28
Some SoCs, such as H6, doesn't have a full-featured TCON TOP. Add quirks support for TCON TOP. Currently the presence of TCON_TV1 and DSI is controlled via the quirks structure. Acked-by: Maxime Ripard <[email protected]> Signed-off-by: Icenowy Zheng <[email protected]> [Fixed code style and removed unnecessary initialization] Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-05drm/sun4i: Initialize registers in tcon-top driverJernej Skrabec1-0/+7
It turns out that TCON TOP registers in H6 SoC have non-zero reset value. This may cause issues if bits are not changed during configuration. To prevent that, initialize registers to 0. Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-05drm/sun4i: Add support for H6 HDMI PHYJernej Skrabec1-0/+137
H6 has Synopsys DWC HDMI 2.0 TX PHY. There is no freely available documentation for it, only code found in BSP kernel. However, judging by the code, PHY is very similar to older Synopsys HDMI PHY described in i.MX6 documentation. Most registers seem to be the same. According to i.MX6 documentation, mpll settings are based on pixel clock and are not specific to each SoC. Because of that, mpll table in this commit is based on that documentation and not on BSP code. Other PHY settings were derived from BSP PHY driver code. Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-05drm/sun4i: Add support for Synopsys HDMI PHYJernej Skrabec3-6/+24
Currently sun8i-hdmi-phy driver supports only custom PHYs connected to DW HDMI controller. Since newest Allwinner SoCs have unmodified Synopsys PHY, driver has to be reorganized to support them. Variant structure is expanded to allow differentiation between custom and Sysnopsys PHYs and to hold Synopsys PHY settings. Since DW HDMI bridge platform data has different fields for custom and Sysnopsys PHY, function sun8i_hdmi_phy_get_ops() is replaced with sun8i_hdmi_phy_set_ops(). Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-05drm/sun4i: dw-hdmi-phy: Reorder quirks by familyJernej Skrabec1-11/+11
Currently, quirks and compatibles are sorted alphabetically. However, they should be sorted by family release date and then alphabetically. Fix that by moving A64 quirks and compatible to bottom. No functional change is made. Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-05drm/sun4i: Add support for H6 DW HDMI controllerJernej Skrabec1-0/+19
H6 has DW HDMI 2.0b controller v2.12a. It supports 4K at 60 Hz and HDCP 2.2. Reviewed-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-05drm/sun4i: dw-hdmi: Add quirk for setting TMDS clockJernej Skrabec2-1/+4
It turns out that H6 HDMI BSP kernel driver doesn't change TMDS rate at all. At this point it is not clear whether it is just not necessary or it would cause some kind of issues. Add a quirk for it. Acked-by: Maxime Ripard <[email protected]> Reviewed-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-05drm/sun4i: dw-hdmi: Make mode_valid function configurableJernej Skrabec2-4/+20
Since it is not possible to access sun8i-dw-hdmi driver private data inside mode_valid function, make it configurable. That way different versions of HDMI controllers can set different function, depending on it's limitations. Reviewed-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-05drm/sun4i: Not all DW HDMI controllers has scrambled addressesJernej Skrabec1-8/+15
Currently supported Allwinner SoCs with DW HDMI controller have scrambled addresses and read lock. However, that is not true in general. For example, A80 and H6 have normal addresses and normal read access. Move code for unscrambling addresses and unlocking read access to it's own function and call it from init function. Reviewed-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-05drm/bridge/synopsys: dw-hdmi: Enable workaround for v2.12aJernej Skrabec1-0/+1
It turns out that even new DW HDMI controllers exhibits same magenta line issues as older versions. Enable workaround for v2.12a. Reviewed-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-05drm/sun4i: Add support for H6 DE3 mixer 0Jernej Skrabec1-0/+13
Mixer 0 has 1 VI and 3 UI planes, scaler on all planes and can output 4K image @60Hz. It also support 10 bit colors, which are not yet implemented. Reviewed-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-05drm/sun4i: Add basic support for DE3Jernej Skrabec9-17/+202
Display Engine 3 is an upgrade of DE2 with new features like support for 10 bit color formats and support for AFBC. Most of DE2 code works with DE3, except some small details. Implement basic support for DE3. Support for 10 bit colort formats and AFBC, among others missing features, will be added later. Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/260238/
2018-11-05drm/sun4i: Disable unused DE2 sub-enginesJernej Skrabec2-2/+11
Some sub-engines are unused. Disable them explicitly. Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-05drm/sun4i: Fix DE2 mixer sizeJernej Skrabec2-1/+3
DE2 mixer is always 0x6000 bytes in size on all known SoCs. While at it, introduce a macro for that. Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-05drm/sun4i: Rework DE2 register definesJernej Skrabec10-159/+219
Most, if not all, registers found in DE2 still exists in DE3. However, units are on different base addresses. To prepare for addition of DE3 support, registers macros are reworked so they take base address as parameter. Signed-off-by: Jernej Skrabec <[email protected]> [rebased] Signed-off-by: Icenowy Zheng <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-05pinctrl: meson: fix meson8b ao pull register bitsJerome Brunet1-1/+1
AO pull register definition is inverted between pull (up/down) and pull enable. Fixing this allows to properly apply bias setting through pinconf Fixes: 0fefcb6876d0 ("pinctrl: Add support for Meson8b") Signed-off-by: Jerome Brunet <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2018-11-05pinctrl: meson: fix meson8 ao pull register bitsJerome Brunet1-1/+1
AO pull register definition is inverted between pull (up/down) and pull enable. Fixing this allows to properly apply bias setting through pinconf Fixes: 6ac730951104 ("pinctrl: add driver for Amlogic Meson SoCs") Signed-off-by: Jerome Brunet <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2018-11-05pinctrl: meson: fix gxl ao pull register bitsJerome Brunet1-1/+1
AO pull register definition is inverted between pull (up/down) and pull enable. Fixing this allows to properly apply bias setting through pinconf Fixes: 0f15f500ff2c ("pinctrl: meson: Add GXL pinctrl definitions") Signed-off-by: Jerome Brunet <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2018-11-05pinctrl: meson: fix gxbb ao pull register bitsJerome Brunet1-1/+1
AO pull register definition is inverted between pull (up/down) and pull enable. Fixing this allows to properly apply bias setting through pinconf Fixes: 468c234f9ed7 ("pinctrl: amlogic: Add support for Amlogic Meson GXBB SoC") Signed-off-by: Jerome Brunet <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2018-11-05pinctrl: meson: fix pinconf bias disableJerome Brunet1-1/+1
If a bias is enabled on a pin of an Amlogic SoC, calling .pin_config_set() with PIN_CONFIG_BIAS_DISABLE will not disable the bias. Instead it will force a pull-down bias on the pin. Instead of the pull type register bank, the driver should access the pull enable register bank. Fixes: 6ac730951104 ("pinctrl: add driver for Amlogic Meson SoCs") Signed-off-by: Jerome Brunet <[email protected]> Acked-by: Neil Armstrong <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2018-11-05mtd: nand: drop kernel-doc notation for a deleted function parameterRandy Dunlap1-1/+0
Remove kernel-doc notation for a deleted function parameter to prevent a kernel-doc warning: ../drivers/mtd/nand/raw/nand_base.c:603: warning: Excess function parameter 'mtd' description in 'panic_nand_wait' Fixes: f1d46942e823 ("mtd: rawnand: Pass a nand_chip object to chip->waitfunc()") Signed-off-by: Randy Dunlap <[email protected]> Cc: Boris Brezillon <[email protected]> Cc: Miquel Raynal <[email protected]> Cc: Richard Weinberger <[email protected]> Reviewed-by: Miquel Raynal <[email protected]> Signed-off-by: Boris Brezillon <[email protected]>
2018-11-05mtd: docg3: don't set conflicting BCH_CONST_PARAMS optionArnd Bergmann1-1/+1
I noticed during the creation of another bugfix that the BCH_CONST_PARAMS option that is set by DOCG3 breaks setting variable parameters for any other users of the BCH library code. The only other user we have today is the MTD_NAND software BCH implementation (most flash controllers use hardware BCH these days and are not affected). I considered removing BCH_CONST_PARAMS entirely because of the inherent conflict, but according to the description in lib/bch.c there is a significant performance benefit in keeping it. To avoid the immediate problem of the conflict between MTD_NAND_BCH and DOCG3, this only sets the constant parameters if MTD_NAND_BCH is disabled, which should fix the problem for all cases that are affected. This should also work for all stable kernels. Note that there is only one machine that actually seems to use the DOCG3 driver (arch/arm/mach-pxa/mioa701.c), so most users should have the driver disabled, but it almost certainly shows up if we wanted to test random kernels on machines that use software BCH in MTD. Fixes: d13d19ece39f ("mtd: docg3: add ECC correction code") Cc: [email protected] Cc: Robert Jarzmik <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Boris Brezillon <[email protected]>
2018-11-05drm/exynos/fbdev: do not skip fbdev init if there are no connectorsAndrzej Hajda1-1/+1
Since connectors can be created dynamically, fbdev should be initialized even if there are no connectors at the moment. Otherwise fbdev will not be created even after connector's appearance. The patch fixes lack of fbdev on rinato and trats boards. Fixes: 6afb7721e2a0 ("drm/exynos: move connector creation to attach callback") Reported-by: Marek Szyprowski <[email protected]> Signed-off-by: Andrzej Hajda <[email protected]> Tested-by: Marek Szyprowski <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2018-11-05drm/exynos/dsi: register connector if it is created after drm bindAndrzej Hajda1-2/+8
DSI device can be attached after DRM device is registered. In such case newly created connector must be registered by exynos_dsi. The patch fixes exynos_drm on rinato and trats boards. Fixes: 6afb7721e2a0 ("drm/exynos: move connector creation to attach callback") Reported-by: Marek Szyprowski <[email protected]> Signed-off-by: Andrzej Hajda <[email protected]> Tested-by: Marek Szyprowski <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2018-11-05Revert "drm/exynos/decon5433: implement frame counter"Inki Dae3-21/+0
This reverts commit 0586feba322e1de05075700eb4b835c8b683e62b This patch makes it to need get_vblank_counter callback in crtc to get frame counter from decon driver. However, drm_dev->max_vblank_count is a member unique to vendor's DRM driver but in case of ARM DRM, some CRTC devices don't provide the frame counter value. As a result, this patch made extension and clone mode not working. Instead of this patch, we may need separated max_vblank_count which belongs to each CRTC device, or need to implement frame counter emulation for them who don't support HW frame counter. Signed-off-by: Inki Dae <[email protected]>
2018-11-05drm/exynos: checking for NULL instead of IS_ERR()Dan Carpenter1-1/+3
The of_drm_find_panel() function returns error pointers and never NULL but we the driver assumes that ->panel is NULL when it's not present. Fixes: 6afb7721e2a0 ("drm/exynos: move connector creation to attach callback") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2018-11-04bonding/802.3ad: fix link_failure_count trackingJarod Wilson1-2/+2
Commit 4d2c0cda07448ea6980f00102dc3964eb25e241c set slave->link to BOND_LINK_DOWN for 802.3ad bonds whenever invalid speed/duplex values were read, to fix a problem with slaves getting into weird states, but in the process, broke tracking of link failures, as going straight to BOND_LINK_DOWN when a link is indeed down (cable pulled, switch rebooted) means we broke out of bond_miimon_inspect()'s BOND_LINK_DOWN case because !link_state was already true, we never incremented commit, and never got a chance to call bond_miimon_commit(), where slave->link_failure_count would be incremented. I believe the simple fix here is to mark the slave as BOND_LINK_FAIL, and let bond_miimon_inspect() transition the link from _FAIL to either _UP or _DOWN, and in the latter case, we now get proper incrementing of link_failure_count again. Fixes: 4d2c0cda0744 ("bonding: speed/duplex update at NETDEV_UP event") CC: Mahesh Bandewar <[email protected]> CC: David S. Miller <[email protected]> CC: [email protected] CC: [email protected] Signed-off-by: Jarod Wilson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-04net: phy: realtek: fix RTL8201F sysfs nameHolger Hoffstätte1-1/+1
Since 4.19 the following error in sysfs has appeared when using the r8169 NIC driver: $cd /sys/module/realtek/drivers $ls -l ls: cannot access 'mdio_bus:RTL8201F 10/100Mbps Ethernet': No such file or directory [..garbled dir entries follow..] Apparently the forward slash in "10/100Mbps Ethernet" is interpreted as directory separator that leads nowhere, and was introduced in commit 513588dd44b ("net: phy: realtek: add RTL8201F phy-id and functions"). Fix this by removing the offending slash in the driver name. Other drivers in net/phy seem to have the same problem, but I cannot test/verify them. Fixes: 513588dd44b ("net: phy: realtek: add RTL8201F phy-id and functions") Signed-off-by: Holger Hoffstätte <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-04hwmon: (ibmpowernv) Remove bogus __init annotationsGeert Uytterhoeven1-4/+3
If gcc decides not to inline make_sensor_label(): WARNING: vmlinux.o(.text+0x4df549c): Section mismatch in reference from the function .create_device_attrs() to the function .init.text:.make_sensor_label() The function .create_device_attrs() references the function __init .make_sensor_label(). This is often because .create_device_attrs lacks a __init annotation or the annotation of .make_sensor_label is wrong. As .probe() can be called after freeing of __init memory, all __init annotiations in the driver are bogus, and should be removed. Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2018-11-04hwmon: (core) Fix double-free in __hwmon_device_register()Dmitry Osipenko1-4/+4
Fix double-free that happens when thermal zone setup fails, see KASAN log below. ================================================================== BUG: KASAN: double-free or invalid-free in __hwmon_device_register+0x5dc/0xa7c CPU: 0 PID: 132 Comm: kworker/0:2 Tainted: G B 4.19.0-rc8-next-20181016-00042-gb52cd80401e9-dirty #41 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: events deferred_probe_work_func Backtrace: [<c0110540>] (dump_backtrace) from [<c0110944>] (show_stack+0x20/0x24) [<c0110924>] (show_stack) from [<c105cb08>] (dump_stack+0x9c/0xb0) [<c105ca6c>] (dump_stack) from [<c02fdaec>] (print_address_description+0x68/0x250) [<c02fda84>] (print_address_description) from [<c02fd4ac>] (kasan_report_invalid_free+0x68/0x88) [<c02fd444>] (kasan_report_invalid_free) from [<c02fc85c>] (__kasan_slab_free+0x1f4/0x200) [<c02fc668>] (__kasan_slab_free) from [<c02fd0c0>] (kasan_slab_free+0x14/0x18) [<c02fd0ac>] (kasan_slab_free) from [<c02f9c6c>] (kfree+0x90/0x294) [<c02f9bdc>] (kfree) from [<c0b41bbc>] (__hwmon_device_register+0x5dc/0xa7c) [<c0b415e0>] (__hwmon_device_register) from [<c0b421e8>] (hwmon_device_register_with_info+0xa0/0xa8) [<c0b42148>] (hwmon_device_register_with_info) from [<c0b42324>] (devm_hwmon_device_register_with_info+0x74/0xb4) [<c0b422b0>] (devm_hwmon_device_register_with_info) from [<c0b4481c>] (lm90_probe+0x414/0x578) [<c0b44408>] (lm90_probe) from [<c0aeeff4>] (i2c_device_probe+0x35c/0x384) [<c0aeec98>] (i2c_device_probe) from [<c08776cc>] (really_probe+0x290/0x3e4) [<c087743c>] (really_probe) from [<c0877a2c>] (driver_probe_device+0x80/0x1c4) [<c08779ac>] (driver_probe_device) from [<c0877da8>] (__device_attach_driver+0x104/0x11c) [<c0877ca4>] (__device_attach_driver) from [<c0874dd8>] (bus_for_each_drv+0xa4/0xc8) [<c0874d34>] (bus_for_each_drv) from [<c08773b0>] (__device_attach+0xf0/0x15c) [<c08772c0>] (__device_attach) from [<c0877e24>] (device_initial_probe+0x1c/0x20) [<c0877e08>] (device_initial_probe) from [<c08762f4>] (bus_probe_device+0xdc/0xec) [<c0876218>] (bus_probe_device) from [<c0876a08>] (deferred_probe_work_func+0xa8/0xd4) [<c0876960>] (deferred_probe_work_func) from [<c01527c4>] (process_one_work+0x3dc/0x96c) [<c01523e8>] (process_one_work) from [<c01541e0>] (worker_thread+0x4ec/0x8bc) [<c0153cf4>] (worker_thread) from [<c015b238>] (kthread+0x230/0x240) [<c015b008>] (kthread) from [<c01010bc>] (ret_from_fork+0x14/0x38) Exception stack(0xcf743fb0 to 0xcf743ff8) 3fa0: 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Allocated by task 132: kasan_kmalloc.part.1+0x58/0xf4 kasan_kmalloc+0x90/0xa4 kmem_cache_alloc_trace+0x90/0x2a0 __hwmon_device_register+0xbc/0xa7c hwmon_device_register_with_info+0xa0/0xa8 devm_hwmon_device_register_with_info+0x74/0xb4 lm90_probe+0x414/0x578 i2c_device_probe+0x35c/0x384 really_probe+0x290/0x3e4 driver_probe_device+0x80/0x1c4 __device_attach_driver+0x104/0x11c bus_for_each_drv+0xa4/0xc8 __device_attach+0xf0/0x15c device_initial_probe+0x1c/0x20 bus_probe_device+0xdc/0xec deferred_probe_work_func+0xa8/0xd4 process_one_work+0x3dc/0x96c worker_thread+0x4ec/0x8bc kthread+0x230/0x240 ret_from_fork+0x14/0x38 (null) Freed by task 132: __kasan_slab_free+0x12c/0x200 kasan_slab_free+0x14/0x18 kfree+0x90/0x294 hwmon_dev_release+0x1c/0x20 device_release+0x4c/0xe8 kobject_put+0xac/0x11c device_unregister+0x2c/0x30 __hwmon_device_register+0xa58/0xa7c hwmon_device_register_with_info+0xa0/0xa8 devm_hwmon_device_register_with_info+0x74/0xb4 lm90_probe+0x414/0x578 i2c_device_probe+0x35c/0x384 really_probe+0x290/0x3e4 driver_probe_device+0x80/0x1c4 __device_attach_driver+0x104/0x11c bus_for_each_drv+0xa4/0xc8 __device_attach+0xf0/0x15c device_initial_probe+0x1c/0x20 bus_probe_device+0xdc/0xec deferred_probe_work_func+0xa8/0xd4 process_one_work+0x3dc/0x96c worker_thread+0x4ec/0x8bc kthread+0x230/0x240 ret_from_fork+0x14/0x38 (null) Cc: <[email protected]> # v4.15+ Fixes: 47c332deb8e8 ("hwmon: Deal with errors from the thermal subsystem") Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2018-11-04Merge tag 'tags/upstream-4.20-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds2-0/+3
Pull UBIFS updates from Richard Weinberger: - Full filesystem authentication feature, UBIFS is now able to have the whole filesystem structure authenticated plus user data encrypted and authenticated. - Minor cleanups * tag 'tags/upstream-4.20-rc1' of git://git.infradead.org/linux-ubifs: (26 commits) ubifs: Remove unneeded semicolon Documentation: ubifs: Add authentication whitepaper ubifs: Enable authentication support ubifs: Do not update inode size in-place in authenticated mode ubifs: Add hashes and HMACs to default filesystem ubifs: authentication: Authenticate super block node ubifs: Create hash for default LPT ubfis: authentication: Authenticate master node ubifs: authentication: Authenticate LPT ubifs: Authenticate replayed journal ubifs: Add auth nodes to garbage collector journal head ubifs: Add authentication nodes to journal ubifs: authentication: Add hashes to index nodes ubifs: Add hashes to the tree node cache ubifs: Create functions to embed a HMAC in a node ubifs: Add helper functions for authentication support ubifs: Add separate functions to init/crc a node ubifs: Format changes for authentication support ubifs: Store read superblock node ubifs: Drop write_node ...
2018-11-04Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds4-0/+347
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more timer updates from Thomas Gleixner: "A set of commits for the new C-SKY architecture timers" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dt-bindings: timer: gx6605s SOC timer clocksource/drivers/c-sky: Add gx6605s SOC system timer dt-bindings: timer: C-SKY Multi-processor timer clocksource/drivers/c-sky: Add C-SKY SMP timer
2018-11-04Merge tag 'ntb-4.20' of git://github.com/jonmason/ntbLinus Torvalds6-110/+429
Pull NTB updates from Jon Mason: "Fairly minor changes and bug fixes: NTB IDT thermal changes and hook into hwmon, ntb_netdev clean-up of private struct, and a few bug fixes" * tag 'ntb-4.20' of git://github.com/jonmason/ntb: ntb: idt: Alter the driver info comments ntb: idt: Discard temperature sensor IRQ handler ntb: idt: Add basic hwmon sysfs interface ntb: idt: Alter temperature read method ntb_netdev: Simplify remove with client device drvdata NTB: transport: Try harder to alloc an aligned MW buffer ntb: ntb_transport: Mark expected switch fall-throughs ntb: idt: Set PCIe bus address to BARLIMITx NTB: ntb_hw_idt: replace IS_ERR_OR_NULL with regular NULL checks ntb: intel: fix return value for ndev_vec_mask() ntb_netdev: fix sleep time mismatch
2018-11-04clockevents/drivers/i8253: Add support for PIT shutdown quirkMichael Kelley1-2/+12
Add support for platforms where pit_shutdown() doesn't work because of a quirk in the PIT emulation. On these platforms setting the counter register to zero causes the PIT to start running again, negating the shutdown. Provide a global variable that controls whether the counter register is zero'ed, which platform specific code can override. Signed-off-by: Michael Kelley <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: vkuznets <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: KY Srinivasan <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-11-03mlxsw: spectrum: Fix IP2ME CPU policer configurationShalom Toledo1-1/+0
The CPU policer used to police packets being trapped via a local route (IP2ME) was incorrectly configured to police based on bytes per second instead of packets per second. Change the policer to police based on packets per second and avoid packet loss under certain circumstances. Fixes: 9148e7cf73ce ("mlxsw: spectrum: Add policers for trap groups") Signed-off-by: Shalom Toledo <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03qed: fix link config error handlingArnd Bergmann1-2/+5
gcc-8 notices that qed_mcp_get_transceiver_data() may fail to return a result to the caller: drivers/net/ethernet/qlogic/qed/qed_mcp.c: In function 'qed_mcp_trans_speed_mask': drivers/net/ethernet/qlogic/qed/qed_mcp.c:1955:2: error: 'transceiver_type' may be used uninitialized in this function [-Werror=maybe-uninitialized] When an error is returned by qed_mcp_get_transceiver_data(), we should propagate that to the caller of qed_mcp_trans_speed_mask() rather than continuing with uninitialized data. Fixes: c56a8be7e7aa ("qed: Add supported link and advertise link to display in ethtool.") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-12/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "A number of fixes and some late updates: - make in_compat_syscall() behavior on x86-32 similar to other platforms, this touches a number of generic files but is not intended to impact non-x86 platforms. - objtool fixes - PAT preemption fix - paravirt fixes/cleanups - cpufeatures updates for new instructions - earlyprintk quirk - make microcode version in sysfs world-readable (it is already world-readable in procfs) - minor cleanups and fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: compat: Cleanup in_compat_syscall() callers x86/compat: Adjust in_compat_syscall() to generic code under !COMPAT objtool: Support GCC 9 cold subfunction naming scheme x86/numa_emulation: Fix uniform-split numa emulation x86/paravirt: Remove unused _paravirt_ident_32 x86/mm/pat: Disable preemption around __flush_tlb_all() x86/paravirt: Remove GPL from pv_ops export x86/traps: Use format string with panic() call x86: Clean up 'sizeof x' => 'sizeof(x)' x86/cpufeatures: Enumerate MOVDIR64B instruction x86/cpufeatures: Enumerate MOVDIRI instruction x86/earlyprintk: Add a force option for pciserial device objtool: Support per-function rodata sections x86/microcode: Make revision and processor flags world-readable
2018-11-03Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: "An irqchip driver fix and a memory (over-)allocation fix" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/irq-mvebu-sei: Fix a NULL vs IS_ERR() bug in probe function irq/matrix: Fix memory overallocation
2018-11-03Merge branch 'core/urgent' into x86/urgent, to pick up objtool fixIngo Molnar2394-52991/+197761
Signed-off-by: Ingo Molnar <[email protected]>
2018-11-03net: hns3: Fix for out-of-bounds access when setting pfc back pressureYunsheng Lin1-6/+4
The vport should be initialized to hdev->vport for each bp group, otherwise it will cause out-of-bounds access and bp setting not correct problem. [ 35.254124] BUG: KASAN: slab-out-of-bounds in hclge_pause_setup_hw+0x2a0/0x3f8 [hclge] [ 35.254126] Read of size 2 at addr ffff803b6651581a by task kworker/0:1/14 [ 35.254132] CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 4.19.0-rc7-hulk+ #85 [ 35.254133] Hardware name: Huawei D06/D06, BIOS Hisilicon D06 UEFI RC0 - B052 (V0.52) 09/14/2018 [ 35.254141] Workqueue: events work_for_cpu_fn [ 35.254144] Call trace: [ 35.254147] dump_backtrace+0x0/0x2f0 [ 35.254149] show_stack+0x24/0x30 [ 35.254154] dump_stack+0x110/0x184 [ 35.254157] print_address_description+0x168/0x2b0 [ 35.254160] kasan_report+0x184/0x310 [ 35.254162] __asan_load2+0x7c/0xa0 [ 35.254170] hclge_pause_setup_hw+0x2a0/0x3f8 [hclge] [ 35.254177] hclge_tm_init_hw+0x794/0x9f0 [hclge] [ 35.254184] hclge_tm_schd_init+0x48/0x58 [hclge] [ 35.254191] hclge_init_ae_dev+0x778/0x1168 [hclge] [ 35.254196] hnae3_register_ae_dev+0x14c/0x298 [hnae3] [ 35.254206] hns3_probe+0x88/0xa8 [hns3] [ 35.254210] local_pci_probe+0x7c/0xf0 [ 35.254212] work_for_cpu_fn+0x34/0x50 [ 35.254214] process_one_work+0x4d4/0xa38 [ 35.254216] worker_thread+0x55c/0x8d8 [ 35.254219] kthread+0x1b0/0x1b8 [ 35.254222] ret_from_fork+0x10/0x1c [ 35.254224] The buggy address belongs to the page: [ 35.254228] page:ffff7e00ed994400 count:1 mapcount:0 mapping:0000000000000000 index:0x0 compound_mapcount: 0 [ 35.273835] flags: 0xfffff8000008000(head) [ 35.282007] raw: 0fffff8000008000 dead000000000100 dead000000000200 0000000000000000 [ 35.282010] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 35.282012] page dumped because: kasan: bad access detected [ 35.282014] Memory state around the buggy address: [ 35.282017] ffff803b66515700: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282019] ffff803b66515780: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282021] >ffff803b66515800: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282022] ^ [ 35.282024] ffff803b66515880: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282026] ffff803b66515900: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282028] ================================================================== [ 35.282029] Disabling lock debugging due to kernel taint [ 35.282747] hclge driver initialization finished. Fixes: 67bf2541f4b9 ("net: hns3: Fixes the back pressure setting when sriov is enabled") Signed-off-by: Yunsheng Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03net/mlx4_en: use __netdev_tx_sent_queue()Eric Dumazet1-2/+4
doorbell only depends on xmit_more and netif_tx_queue_stopped() Using __netdev_tx_sent_queue() avoids messing with BQL stop flag, and is more generic. This patch increases performance on GSO workload by keeping doorbells to the minimum required. Signed-off-by: Eric Dumazet <[email protected]> Cc: Tariq Toukan <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03Merge tag 'armsoc-fixes' of ↵Linus Torvalds3-14/+22
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A few fixes who have come in near or during the merge window: - Removal of a VLA usage in Marvell mpp platform code - Enable some IPMI options for ARM64 servers by default, helps testing - Enable PREEMPT on 32-bit ARMv7 defconfig - Minor fix for stm32 DT (removal of an unused DMA property) - Bugfix for TI OMAP1-based ams-delta (-EINVAL -> IRQ_NOTCONNECTED)" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: stm32: update HASH1 dmas property on stm32mp157c ARM: orion: avoid VLA in orion_mpp_conf ARM: defconfig: Update multi_v7 to use PREEMPT arm64: defconfig: Enable some IPMI configs soc: ti: QMSS: Fix usage of irq_set_affinity_hint ARM: OMAP1: ams-delta: Fix impossible .irq < 0
2018-11-03Merge tag 'kbuild-v4.20-2' of ↵Linus Torvalds3-11/+11
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - clean-up leftovers in Kconfig files - remove stale oldnoconfig and silentoldconfig targets - remove unneeded cc-fullversion and cc-name variables - improve merge_config script to allow overriding option prefix * tag 'kbuild-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: remove cc-name variable kbuild: replace cc-name test with CONFIG_CC_IS_CLANG merge_config.sh: Allow to define config prefix kbuild: remove unused cc-fullversion variable kconfig: remove silentoldconfig target kconfig: remove oldnoconfig target powerpc: PCI_MSI needs PCI powerpc: remove CONFIG_MCA leftovers powerpc: remove CONFIG_PCI_QSPAN scsi: aha152x: rename the PCMCIA define
2018-11-03s390/qeth: report 25Gbit link speedJulian Wiedmann2-2/+20
This adds the various identifiers for 25Gbit cards, and wires them up into sysfs and ethtool. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03s390/qeth: sanitize ARP requestsJulian Wiedmann4-79/+34
The ARP_{ADD,REMOVE}_ENTRY cmd structs contain reserved fields. Introduce a common helper that doesn't raw-copy the user-provided data into the cmd, but only sets those fields that are strictly needed for the command. This also sets the correct command length for ARP_REMOVE_ENTRY. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03s390/qeth: fix initial operstateJulian Wiedmann4-10/+25
Setting the carrier 'on' for an unregistered netdevice doesn't update its operstate. Fix this by delaying the update until the netdevice has been registered. Fixes: 91cc98f51e3d ("s390/qeth: remove duplicated carrier state tracking") Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03s390/qeth: unregister netdevice only when registeredJulian Wiedmann3-4/+11
qeth only registers its netdevice when the qeth device is first set online. Thus a device that has never been set online will trigger a WARN ("network todo 'hsi%d' but state 0") in unregister_netdev() when removed. Fix this by protecting the unregister step, just like we already protect against repeated registering of the netdevice. Fixes: d3d1b205e89f ("s390/qeth: allocate netdevice early") Reported-by: Karsten Graul <[email protected]> Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>