| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Merge additional ACPI-related updates for 5.17-rc1:
- Ignore E820 reservations covering PCI host bridge windows on
sufficiently recent x86 systems to avoid issues with allocating
PCI BARs on systems where the E820 reservations cover the entire
PCI host bridge memory window returned by the _CRS object in the
system's ACPI tables (Hans de Goede).
- Add more sanity checking to ACPI SPCR tables parsing (Mark
Langsdorf).
- Fix up ACPI APD (AMD Soc) driver initialization (Jiasheng Jiang).
- Drop unnecessary "static" from the ACPI PCC address space handling
driver added recently (kernel test robot).
* acpi-x86:
x86/PCI: Ignore E820 reservations for bridge windows on newer systems
* acpi-tables:
ACPI: SPCR: check if table->serial_port.access_width is too wide
* acpi-soc:
ACPI: APD: Check for NULL pointer after calling devm_ioremap()
* acpi-pcc:
ACPI: PCC: pcc_ctx can be static
|
|
Commit 7cfa9c92d0a3 ("net: sfp: avoid power switch on address-change
modules") unintetionally changed the semantics for high power modules
without the digital diagnostics monitoring. We repeatedly attempt to
read the power status from the non-existing 0xa2 address in a futile
hope this failure is temporary:
[ 8.856051] sfp sfp-eth3: module NTT 0000000000000000 rev 0000 sn 0000000000000000 dc 160408
[ 8.865843] mvpp2 f4000000.ethernet eth3: switched to inband/1000base-x link mode
[ 8.873469] sfp sfp-eth3: Failed to read EEPROM: -5
[ 8.983251] sfp sfp-eth3: Failed to read EEPROM: -5
[ 9.103250] sfp sfp-eth3: Failed to read EEPROM: -5
We previosuly assumed such modules were powered up in the correct mode,
continuing without further configuration as long as the required power
class was supported by the host.
Restore this behaviour, while preserving the intent of subsequent
patches to avoid the "Address Change Sequence not supported" warning
if we are not going to be accessing the DDM address.
Fixes: 7cfa9c92d0a3 ("net: sfp: avoid power switch on address-change modules")
Reported-by: 照山周一郎 <[email protected]>
Tested-by: 照山周一郎 <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
If brd_alloc() from brd_probe() is called before brd_alloc() from
brd_init() is called, module loading will fail with -EEXIST error.
To close this race, call __register_blkdev() just before leaving
brd_init().
Then, we can remove brd_devices_mutex mutex, for brd_device list
will no longer be accessed concurrently.
Signed-off-by: Tetsuo Handa <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Luis Chamberlain <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:
int irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
Fix the check of return value to catch errors correctly.
Fixes: 4195926aedca ("gpio: Add support for IDT 79RC3243x GPIO controller")
Signed-off-by: Miaoqian Lin <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:
int irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
Fix the check of return value to catch errors correctly.
Fixes: 76c47d1449fc ("gpio: mpc8xxx: Add ACPI support")
Signed-off-by: Miaoqian Lin <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
In the blamed commit, the call to the function
switchdev_bridge_port_offload was passing the wrong argument for
atomic_nb. It was ocelot_netdevice_nb instead of ocelot_swtchdev_nb.
This patch fixes this issue.
Fixes: 4e51bf44a03af6 ("net: bridge: move the switchdev object replay helpers to "push" mode")
Signed-off-by: Horatiu Vultur <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
TC voltage swing programming sequence was updated with a new step.
BSpec: 54956
Cc: [email protected]
Cc: Jani Nikula <[email protected]>
Cc: Clint Taylor <[email protected]>
Cc: Imre Deak <[email protected]>
Signed-off-by: José Roberto de Souza <[email protected]>
Reviewed-by: Clint Taylor <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 5ff59dddacd4738edcbd01847d9df7682348cf86)
Signed-off-by: Tvrtko Ursulin <[email protected]>
|
|
EHL table was recently updated with some minor fixes.
BSpec: 21257
Cc: [email protected]
Cc: Clint Taylor <[email protected]>
Signed-off-by: José Roberto de Souza <[email protected]>
Reviewed-by: Clint Taylor <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 5ec7baef52c367cdbda964aa662f7135c25bab1f)
Signed-off-by: Tvrtko Ursulin <[email protected]>
|
|
Prior to Linux v5.4 devtmpfs used mount_single() which treats the given
mount options as "remount" options, so it updates the configuration of
the single super_block on each mount.
Since that was changed, the mount options used for devtmpfs are ignored.
This is a regression which affect systemd - which mounts devtmpfs with
"-o mode=755,size=4m,nr_inodes=1m".
This patch restores the "remount" effect by calling reconfigure_single()
Fixes: d401727ea0d7 ("devtmpfs: don't mix {ramfs,shmem}_fill_super() with mount_single()")
Acked-by: Christian Brauner <[email protected]>
Cc: Al Viro <[email protected]>
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
"Updates to Goodix touchscreen driver (addition of pen support) and
Silead touchscreen driver (also addition of pen support and parsing of
embedded firmware to determine screen size), along with assorted fixes
for other drivers"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ti_am335x_tsc - fix a typo in a comment
Input: zinitix - add compatible for bt532
Input: zinitix - handle proper supply names
dt-bindings: input/ts/zinitix: Convert to YAML, fix and extend
Input: axp20x-pek - revert "always register interrupt handlers" change
Input: gpio-keys - avoid clearing twice some memory
Input: byd - fix typo in a comment
Input: ucb1400_ts - remove redundant variable penup
Input: ti_am335x_tsc - lower the X and Y sampling time
Input: ti_am335x_tsc - fix STEPCONFIG setup for Z2
Input: ti_am335x_tsc - set ADCREFM for X configuration
Input: silead - add pen support
Input: silead - add support for EFI-embedded fw using different min/max coordinates
Input: goodix - 2 small fixes for pen support
Input: goodix - improve gpiod_get() error logging
Input: goodix - add pen support
Input: ff-core - correct magnitude setting for rumble compatibility
Input: palmas-pwrbutton - make a couple of arrays static const
Input: wacom_i2c - clean up the query device fields
Input: palmas-pwrbutton - use bitfield helpers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"Mostly non urgent fixes and a few improvements (including runtime pm
suport) to the Silvaco driver"
* tag 'i3c/for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: dw: check return of dw_i3c_master_get_free_pos()
i3c: master: mipi-i3c-hci: correct the config reference for endianness
i3c: master: svc: enable the interrupt in the enable ibi function
i3c: master: svc: add the missing module device table
i3c: master: svc: add runtime pm support
i3c: master: svc: set ODSTOP to let I2C device see the STOP signal
i3c: master: svc: add support for slave to stop returning data
i3c: master: svc: separate err, fifo and disable interrupt of reset function
i3c: master: svc: fix atomic issue
i3c: master: svc: move module reset behind clk enable
i3c/master/mipi-i3c-hci: Fix a potentially infinite loop in 'hci_dat_v1_get_index()'
i3c: fix incorrect address slot lookup on 64-bit
i3c/master/mipi-i3c-hci: Prefer kcalloc over open coded arithmetic
i3c/master/mipi-i3c-hci: Prefer struct_size over open coded arithmetic
|
|
Pull NTB updates from Jon Mason:
"New AMD PCI ID for NTB, and a number of bug fixes for ntb_hw_switchtec
for Linux v5.17"
* tag 'ntb-5.17' of git://github.com/jonmason/ntb:
ntb_hw_switchtec: Fix a minor issue in config_req_id_table()
ntb_hw_switchtec: Remove code for disabling ID protection
ntb_hw_switchtec: Update the way of getting VEP instance ID
ntb_hw_switchtec: AND with the part_map for a valid tpart_vec
ntb_hw_switchtec: Fix bug with more than 32 partitions
ntb_hw_switchtec: Fix pff ioread to read into mmio_part_cfg_all
ntb_hw_switchtec: fix the spelling of "its"
NTB/msi: Fix ntbm_msi_request_threaded_irq() kernel-doc comment
ntb_hw_amd: Add NTB PCI ID for new gen CPU
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- New device support:
- Watchdog Timer driver for RZ/G2L
- Realtek Otto watchdog timer
- Apple SoC watchdog driver
- Fintek F81966
- Remove BCM63XX_WDT after support for this SoC was added to
BCM7038_WDT
- Improvements of the BCM7038_WDT and s3c2410_wdt code
- Several other fixes and improvements
* tag 'linux-watchdog-5.17-rc1' of git://www.linux-watchdog.org/linux-watchdog: (38 commits)
watchdog: msc313e: Check if the WDT was running at boot
watchdog: Add Apple SoC watchdog driver
dt-bindings: watchdog: Add SM6350 and SM8250 compatible
watchdog: s3c2410: Fix getting the optional clock
watchdog: s3c2410: Use platform_get_irq() to get the interrupt
dt-bindings: watchdog: atmel: Add missing 'interrupts' property
watchdog: mtk_wdt: use platform_get_irq_optional
watchdog: Add Watchdog Timer driver for RZ/G2L
dt-bindings: watchdog: renesas,wdt: Add support for RZ/G2L
watchdog: da9063: Add hard dependency on I2C
watchdog: Add Realtek Otto watchdog timer
dt-bindings: watchdog: Realtek Otto WDT binding
watchdog: s3c2410: Add Exynos850 support
watchdog: da9063: use atomic safe i2c transfer in reset handler
watchdog: davinci: Use div64_ul instead of do_div
watchdog: Remove BCM63XX_WDT
MIPS: BCM63XX: Provide platform data to watchdog device
watchdog: bcm7038_wdt: Add platform device id for bcm63xx-wdt
watchdog: Allow building BCM7038_WDT for BCM63XX
watchdog: bcm7038_wdt: Support platform data configuration
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull signal/exit/ptrace updates from Eric Biederman:
"This set of changes deletes some dead code, makes a lot of cleanups
which hopefully make the code easier to follow, and fixes bugs found
along the way.
The end-game which I have not yet reached yet is for fatal signals
that generate coredumps to be short-circuit deliverable from
complete_signal, for force_siginfo_to_task not to require changing
userspace configured signal delivery state, and for the ptrace stops
to always happen in locations where we can guarantee on all
architectures that the all of the registers are saved and available on
the stack.
Removal of profile_task_ext, profile_munmap, and profile_handoff_task
are the big successes for dead code removal this round.
A bunch of small bug fixes are included, as most of the issues
reported were small enough that they would not affect bisection so I
simply added the fixes and did not fold the fixes into the changes
they were fixing.
There was a bug that broke coredumps piped to systemd-coredump. I
dropped the change that caused that bug and replaced it entirely with
something much more restrained. Unfortunately that required some
rebasing.
Some successes after this set of changes: There are few enough calls
to do_exit to audit in a reasonable amount of time. The lifetime of
struct kthread now matches the lifetime of struct task, and the
pointer to struct kthread is no longer stored in set_child_tid. The
flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is
removed. Issues where task->exit_code was examined with
signal->group_exit_code should been examined were fixed.
There are several loosely related changes included because I am
cleaning up and if I don't include them they will probably get lost.
The original postings of these changes can be found at:
https://lkml.kernel.org/r/[email protected]
https://lkml.kernel.org/r/[email protected]
https://lkml.kernel.org/r/[email protected]
I trimmed back the last set of changes to only the obviously correct
once. Simply because there was less time for review than I had hoped"
* 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits)
ptrace/m68k: Stop open coding ptrace_report_syscall
ptrace: Remove unused regs argument from ptrace_report_syscall
ptrace: Remove second setting of PT_SEIZED in ptrace_attach
taskstats: Cleanup the use of task->exit_code
exit: Use the correct exit_code in /proc/<pid>/stat
exit: Fix the exit_code for wait_task_zombie
exit: Coredumps reach do_group_exit
exit: Remove profile_handoff_task
exit: Remove profile_task_exit & profile_munmap
signal: clean up kernel-doc comments
signal: Remove the helper signal_group_exit
signal: Rename group_exit_task group_exec_task
coredump: Stop setting signal->group_exit_task
signal: Remove SIGNAL_GROUP_COREDUMP
signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process
signal: Make coredump handling explicit in complete_signal
signal: Have prepare_signal detect coredumps using signal->core_state
signal: Have the oom killer detect coredumps using signal->core_state
exit: Move force_uaccess back into do_exit
exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit
...
|
|
Wrong hash sends single stream to multiple output interfaces.
The offset calculation was relative to skb->head, fix it to be relative
to skb->data.
Fixes: a815bde56b15 ("net, bonding: Refactor bond_xmit_hash for use with
xdp_buff")
Reviewed-by: Jussi Maki <[email protected]>
Reviewed-by: Saeed Mahameed <[email protected]>
Reviewed-by: Gal Pressman <[email protected]>
Signed-off-by: Moshe Tal <[email protected]>
Acked-by: Jay Vosburgh <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
If devm_ioremap_resource() fails, it should return error
code from sp_rtc->reg_base in sp_rtc_probe().
Fixes: fad6cbe9b2b4 ("rtc: Add driver for RTC in Sunplus SP7021")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
There's limiting the year to 2069. When setting the rtc year to 2070,
reading it returns 1970. Evaluate century starting from 19 to count the
correct year.
$ sudo date -s 20700106
Mon 06 Jan 2070 12:00:00 AM CST
$ sudo hwclock -w
$ sudo hwclock -r
1970-01-06 12:00:49.604968+08:00
Fixes: 2a4daadd4d3e5071 ("rtc: cmos: ignore bogus century byte")
Signed-off-by: Riwen Lu <[email protected]>
Acked-by: Eric Wong <[email protected]>
Reviewed-by: Mateusz Jończyk <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The devm_kzalloc() function returns NULL on error, it doesn't return
error pointers.
Fixes: 86559400b3ef ("rtc: gamecube: Add a RTC driver for the GameCube, Wii and Wii U")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Emmanuel Gil Peyrot <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/20220107073340.GF22086@kili
|
|
The mc146818_get_time() function returns zero on success or negative
a error code on failure. It needs to be type int.
Fixes: d35786b3a28d ("rtc: mc146818-lib: change return values of mc146818_get_time()")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Mateusz Jończyk <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/20220111071922.GE11243@kili
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- More patches for Hyper-V isolation VM support (Tianyu Lan)
- Bug fixes and clean-up patches from various people
* tag 'hyperv-next-signed-20220114' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
scsi: storvsc: Fix storvsc_queuecommand() memory leak
x86/hyperv: Properly deal with empty cpumasks in hyperv_flush_tlb_multi()
Drivers: hv: vmbus: Initialize request offers message for Isolation VM
scsi: storvsc: Fix unsigned comparison to zero
swiotlb: Add CONFIG_HAS_IOMEM check around swiotlb_mem_remap()
x86/hyperv: Fix definition of hv_ghcb_pg variable
Drivers: hv: Fix definition of hypercall input & output arg variables
net: netvsc: Add Isolation VM support for netvsc driver
scsi: storvsc: Add Isolation VM support for storvsc driver
hyper-v: Enable swiotlb bounce buffer for Isolation VM
x86/hyper-v: Add hyperv Isolation VM check in the cc_platform_has()
swiotlb: Add swiotlb bounce buffer remap function for HV IVM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Use pci_find_vsec_capability() instead of open-coding it (Andy
Shevchenko)
- Convert pci_dev_present() stub from macro to static inline to avoid
'unused variable' errors (Hans de Goede)
- Convert sysfs slot attributes from default_attrs to default_groups
(Greg Kroah-Hartman)
- Use DWORD accesses for LTR, L1 SS to avoid BayHub OZ711LV2 erratum
(Rajat Jain)
- Remove unnecessary initialization of static variables (Longji Guo)
Resource management:
- Always write Intel I210 ROM BAR on update to work around device
defect (Bjorn Helgaas)
PCIe native device hotplug:
- Fix pciehp lockdep errors on Thunderbolt undock (Hans de Goede)
- Fix infinite loop in pciehp IRQ handler on power fault (Lukas
Wunner)
Power management:
- Convert amd64-agp, sis-agp, via-agp from legacy PCI power
management to generic power management (Vaibhav Gupta)
IOMMU:
- Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller
so it can work with an IOMMU (Yifeng Li)
Error handling:
- Add PCI_ERROR_RESPONSE and related definitions for signaling and
checking for transaction errors on PCI (Naveen Naidu)
- Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers,
instead of in host controller drivers, when transactions fail on
PCI (Naveen Naidu)
- Use PCI_POSSIBLE_ERROR() to check for possible failure of config
reads (Naveen Naidu)
Peer-to-peer DMA:
- Add Logan Gunthorpe as P2PDMA maintainer (Bjorn Helgaas)
ASPM:
- Calculate link L0s and L1 exit latencies when needed instead of
caching them (Saheed O. Bolarinwa)
- Calculate device L0s and L1 acceptable exit latencies when needed
instead of caching them (Saheed O. Bolarinwa)
- Remove struct aspm_latency since it's no longer needed (Saheed O.
Bolarinwa)
APM X-Gene PCIe controller driver:
- Fix IB window setup, which was broken by the fact that IB resources
are now sorted in address order instead of DT dma-ranges order (Rob
Herring)
Apple PCIe controller driver:
- Enable clock gating to save power (Hector Martin)
- Fix REFCLK1 enable/poll logic (Hector Martin)
Broadcom STB PCIe controller driver:
- Declare bitmap correctly for use by bitmap interfaces (Christophe
JAILLET)
- Clean up computation of legacy and non-legacy MSI bitmasks (Florian
Fainelli)
- Update suspend/resume/remove error handling to warn about errors
and not fail the operation (Jim Quinlan)
- Correct the "pcie" and "msi" interrupt descriptions in DT binding
(Jim Quinlan)
- Add DT bindings for endpoint voltage regulators (Jim Quinlan)
- Split brcm_pcie_setup() into two functions (Jim Quinlan)
- Add mechanism for turning on voltage regulators for connected
devices (Jim Quinlan)
- Turn voltage regulators for connected devices on/off when bus is
added or removed (Jim Quinlan)
- When suspending, don't turn off voltage regulators for wakeup
devices (Jim Quinlan)
Freescale i.MX6 PCIe controller driver:
- Add i.MX8MM support (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Use DWC common ops instead of layerscape-specific link-up functions
(Hou Zhiqiang)
Intel VMD host bridge driver:
- Honor platform ACPI _OSC feature negotiation for Root Ports below
VMD (Kai-Heng Feng)
- Add support for Raptor Lake SKUs (Karthik L Gopalakrishnan)
- Reset everything below VMD before enumerating to work around
failure to enumerate NVMe devices when guest OS reboots (Nirmal
Patel)
Bridge emulation (used by Marvell Aardvark and MVEBU):
- Make emulated ROM BAR read-only by default (Pali Rohár)
- Make some emulated legacy PCI bits read-only for PCIe devices (Pali
Rohár)
- Update reserved bits in emulated PCIe Capability (Pali Rohár)
- Allow drivers to emulate different PCIe Capability versions (Pali
Rohár)
- Set emulated Capabilities List bit for all PCIe devices, since they
must have at least a PCIe Capability (Pali Rohár)
Marvell Aardvark PCIe controller driver:
- Add bridge emulation definitions for PCIe DEVCAP2, DEVCTL2,
DEVSTA2, LNKCAP2, LNKCTL2, LNKSTA2, SLTCAP2, SLTCTL2, SLTSTA2 (Pali
Rohár)
- Add aardvark support for DEVCAP2, DEVCTL2, LNKCAP2 and LNKCTL2
registers (Pali Rohár)
- Clear all MSIs at setup to avoid spurious interrupts (Pali Rohár)
- Disable bus mastering when unbinding host controller driver (Pali
Rohár)
- Mask all interrupts when unbinding host controller driver (Pali
Rohár)
- Fix memory leak in host controller unbind (Pali Rohár)
- Assert PERST# when unbinding host controller driver (Pali Rohár)
- Disable link training when unbinding host controller driver (Pali
Rohár)
- Disable common PHY when unbinding host controller driver (Pali
Rohár)
- Fix resource type checking to check only IORESOURCE_MEM, not
IORESOURCE_MEM_64, which is a flavor of IORESOURCE_MEM (Pali Rohár)
Marvell MVEBU PCIe controller driver:
- Implement pci_remap_iospace() for ARM so mvebu can use
devm_pci_remap_iospace() instead of the previous ARM-specific
pci_ioremap_io() interface (Pali Rohár)
- Use the standard pci_host_probe() instead of the device-specific
mvebu_pci_host_probe() (Pali Rohár)
- Replace all uses of ARM-specific pci_ioremap_io() with the ARM
implementation of the standard pci_remap_iospace() interface and
remove pci_ioremap_io() (Pali Rohár)
- Skip initializing invalid Root Ports (Pali Rohár)
- Check for errors from pci_bridge_emul_init() (Pali Rohár)
- Ignore any bridges at non-zero function numbers (Pali Rohár)
- Return ~0 data for invalid config read size (Pali Rohár)
- Disallow mapping interrupts on emulated bridges (Pali Rohár)
- Clear Root Port Memory & I/O Space Enable and Bus Master Enable at
initialization (Pali Rohár)
- Make type bits in Root Port I/O Base register read-only (Pali
Rohár)
- Disable Root Port windows when base/limit set to invalid values
(Pali Rohár)
- Set controller to Root Complex mode (Pali Rohár)
- Set Root Port Class Code to PCI Bridge (Pali Rohár)
- Update emulated Root Port secondary bus numbers to better reflect
the actual topology (Pali Rohár)
- Add PCI_BRIDGE_CTL_BUS_RESET support to emulated Root Ports so
pci_reset_secondary_bus() can reset connected devices (Pali Rohár)
- Add PCI_EXP_DEVCTL Error Reporting Enable support to emulated Root
Ports (Pali Rohár)
- Add PCI_EXP_RTSTA PME Status bit support to emulated Root Ports
(Pali Rohár)
- Add DEVCAP2, DEVCTL2 and LNKCTL2 support to emulated Root Ports on
Armada XP and newer devices (Pali Rohár)
- Export mvebu-mbus.c symbols to allow pci-mvebu.c to be a module
(Pali Rohár)
- Add support for compiling as a module (Pali Rohár)
MediaTek PCIe controller driver:
- Assert PERST# for 100ms to allow power and clock to stabilize
(qizhong cheng)
MediaTek PCIe Gen3 controller driver:
- Disable Mediatek DVFSRC voltage request since lack of DVFSRC to
respond to the request causes failure to exit L1 PM Substate
(Jianjun Wang)
MediaTek MT7621 PCIe controller driver:
- Declare mt7621_pci_ops static (Sergio Paracuellos)
- Give pcibios_root_bridge_prepare() access to host bridge windows
(Sergio Paracuellos)
- Move MIPS I/O coherency unit setup from driver to
pcibios_root_bridge_prepare() (Sergio Paracuellos)
- Add missing MODULE_LICENSE() (Sergio Paracuellos)
- Allow COMPILE_TEST for all arches (Sergio Paracuellos)
Microsoft Hyper-V host bridge driver:
- Add hv-internal interfaces to encapsulate arch IRQ dependencies
(Sunil Muthuswamy)
- Add arm64 Hyper-V vPCI support (Sunil Muthuswamy)
Qualcomm PCIe controller driver:
- Undo PM setup in qcom_pcie_probe() error handling path (Christophe
JAILLET)
- Use __be16 type to store return value from cpu_to_be16()
(Manivannan Sadhasivam)
- Constify static dw_pcie_ep_ops (Rikard Falkeborn)
Renesas R-Car PCIe controller driver:
- Fix aarch32 abort handler so it doesn't check the wrong bus clock
before accessing the host controller (Marek Vasut)
TI Keystone PCIe controller driver:
- Add register offset for ti,syscon-pcie-id and ti,syscon-pcie-mode
DT properties (Kishon Vijay Abraham I)
MicroSemi Switchtec management driver:
- Add Gen4 automotive device IDs (Kelvin Cao)
- Declare state_names[] as static so it's not allocated and
initialized for every call (Kelvin Cao)
Host controller driver cleanups:
- Use of_device_get_match_data(), not of_match_device(), when we only
need the device data in altera, artpec6, cadence, designware-plat,
dra7xx, keystone, kirin (Fan Fei)
- Drop pointless of_device_get_match_data() cast in j721e (Bjorn
Helgaas)
- Drop redundant struct device * from j721e since struct cdns_pcie
already has one (Bjorn Helgaas)
- Rename driver structs to *_pcie in intel-gw, iproc, ls-gen4,
mediatek-gen3, microchip, mt7621, rcar-gen2, tegra194, uniphier,
xgene, xilinx, xilinx-cpm for consistency across drivers (Fan Fei)
- Fix invalid address space conversions in hisi, spear13xx (Bjorn
Helgaas)
Miscellaneous:
- Sort Intel Device IDs by value (Andy Shevchenko)
- Change Capability offsets to hex to match spec (Baruch Siach)
- Correct misspellings (Krzysztof Wilczyński)
- Terminate statement with semicolon in pci_endpoint_test.c (Ming
Wang)"
* tag 'pci-v5.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (151 commits)
PCI: mt7621: Allow COMPILE_TEST for all arches
PCI: mt7621: Add missing MODULE_LICENSE()
PCI: mt7621: Move MIPS setup to pcibios_root_bridge_prepare()
PCI: Let pcibios_root_bridge_prepare() access bridge->windows
PCI: mt7621: Declare mt7621_pci_ops static
PCI: brcmstb: Do not turn off WOL regulators on suspend
PCI: brcmstb: Add control of subdevice voltage regulators
PCI: brcmstb: Add mechanism to turn on subdev regulators
PCI: brcmstb: Split brcm_pcie_setup() into two funcs
dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators
dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map.
PCI: brcmstb: Fix function return value handling
PCI: brcmstb: Do not use __GENMASK
PCI: brcmstb: Declare 'used' as bitmap, not unsigned long
PCI: hv: Add arm64 Hyper-V vPCI support
PCI: hv: Make the code arch neutral by adding arch specific interfaces
PCI: pciehp: Use down_read/write_nested(reset_lock) to fix lockdep errors
x86/PCI: Remove initialization of static variables to false
PCI: Use DWORD accesses for LTR, L1 SS to avoid erratum
misc: pci_endpoint_test: Terminate statement with semicolon
...
|
|
Pull drm fixes from Daniel Vetter:
"drivers fixes:
- i915 fixes for ttm backend + one pm wakelock fix
- amdgpu fixes, fairly big pile of small things all over. Note this
doesn't yet containe the fixed version of the otg sync patch that
blew up
- small driver fixes: meson, sun4i, vga16fb probe fix
drm core fixes:
- cma-buf heap locking
- ttm compilation
- self refresh helper state check
- wrong error message in atomic helpers
- mipi-dbi buffer mapping"
* tag 'drm-next-2022-01-14' of git://anongit.freedesktop.org/drm/drm: (49 commits)
drm/mipi-dbi: Fix source-buffer address in mipi_dbi_buf_copy
drm: fix error found in some cases after the patch d1af5cd86997
drm/ttm: fix compilation on ARCH=um
dma-buf: cma_heap: Fix mutex locking section
video: vga16fb: Only probe for EGA and VGA 16 color graphic cards
drm/amdkfd: Fix ASIC name typos
drm/amdkfd: Fix DQM asserts on Hawaii
drm/amdgpu: Use correct VIEWPORT_DIMENSION for DCN2
drm/amd/pm: only send GmiPwrDnControl msg on master die (v3)
drm/amdgpu: use spin_lock_irqsave to avoid deadlock by local interrupt
drm/amdgpu: not return error on the init_apu_flags
drm/amdkfd: Use prange->update_list head for remove_list
drm/amdkfd: Use prange->list head for insert_list
drm/amdkfd: make SPDX License expression more sound
drm/amdkfd: Check for null pointer after calling kmemdup
drm/amd/display: invalid parameter check in dmub_hpd_callback
Revert "drm/amdgpu: Don't inherit GEM object VMAs in child process"
drm/amd/display: reset dcn31 SMU mailbox on failures
drm/amdkfd: use default_groups in kobj_type
drm/amdgpu: use default_groups in kobj_type
...
|
|
In pci_generic.c there is a 'mru_default' in struct mhi_pci_dev_info.
This value shall be used for whole mhi if it's given a value for a specific product.
But in function mhi_net_rx_refill_work(), it's still using hard code value MHI_DEFAULT_MRU.
'mru_default' shall have higher priority than MHI_DEFAULT_MRU.
And after checking, this change could help fix a data connection lost issue.
Fixes: 5c2c85315948 ("bus: mhi: pci-generic: configurable network interface MRU")
Signed-off-by: Shujun Wang <[email protected]>
Signed-off-by: Slark Xiao <[email protected]>
Reviewed-by: Loic Poulain <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Existing genphy_loopback() is not applicable for Marvell PHY. Besides
configuring bit-6 and bit-13 in Page 0 Register 0 (Copper Control
Register), it is also required to configure same bits in Page 2
Register 21 (MAC Specific Control Register 2) according to speed of
the loopback is operating.
Tested working on Marvell88E1510 PHY for all speeds (1000/100/10Mbps).
FIXME: Based on trial and error test, it seem 1G need to have delay between
soft reset and loopback enablement.
Fixes: 014068dcb5b1 ("net: phy: genphy_loopback: add link speed configuration")
Cc: <[email protected]> # 5.15.x
Signed-off-by: Mohammad Athari Bin Ismail <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
A dma_request_chan() call is hidden in emac_configure_dma().
It must be released in the probe if an error occurs, as already done in
the remove function.
Add the corresponding dma_release_channel() call.
Fixes: 47869e82c8b8 ("sun4i-emac.c: add dma support")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Clang static analysis reports this problem
mtk_eth_soc.c:394:7: warning: Branch condition evaluates
to a garbage value
if (err)
^~~
err is not initialized and only conditionally set.
So intitialize err.
Fixes: 7e538372694b ("net: ethernet: mediatek: Re-add support SGMII")
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The following command sequence:
tc qdisc del dev swp0 clsact
tc qdisc add dev swp0 ingress_block 1 clsact
tc qdisc add dev swp1 ingress_block 1 clsact
tc filter add block 1 flower action drop
tc qdisc del dev swp0 clsact
produces the following NPD:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000014
pc : vcap_entry_set+0x14/0x70
lr : ocelot_vcap_filter_del+0x198/0x234
Call trace:
vcap_entry_set+0x14/0x70
ocelot_vcap_filter_del+0x198/0x234
ocelot_cls_flower_destroy+0x94/0xe4
felix_cls_flower_del+0x70/0x84
dsa_slave_setup_tc_block_cb+0x13c/0x60c
dsa_slave_setup_tc_block_cb_ig+0x20/0x30
tc_setup_cb_reoffload+0x44/0x120
fl_reoffload+0x280/0x320
tcf_block_playback_offloads+0x6c/0x184
tcf_block_unbind+0x80/0xe0
tcf_block_setup+0x174/0x214
tcf_block_offload_cmd.isra.0+0x100/0x13c
tcf_block_offload_unbind+0x5c/0xa0
__tcf_block_put+0x54/0x174
tcf_block_put_ext+0x5c/0x74
clsact_destroy+0x40/0x60
qdisc_destroy+0x4c/0x150
qdisc_put+0x70/0x90
qdisc_graft+0x3f0/0x4c0
tc_get_qdisc+0x1cc/0x364
rtnetlink_rcv_msg+0x124/0x340
The reason is that the driver isn't prepared to receive two tc filters
with the same cookie. It unconditionally creates a new struct
ocelot_vcap_filter for each tc filter, and it adds all filters with the
same identifier (cookie) to the ocelot_vcap_block.
The problem is here, in ocelot_vcap_filter_del():
/* Gets index of the filter */
index = ocelot_vcap_block_get_filter_index(block, filter);
if (index < 0)
return index;
/* Delete filter */
ocelot_vcap_block_remove_filter(ocelot, block, filter);
/* Move up all the blocks over the deleted filter */
for (i = index; i < block->count; i++) {
struct ocelot_vcap_filter *tmp;
tmp = ocelot_vcap_block_find_filter_by_index(block, i);
vcap_entry_set(ocelot, i, tmp);
}
what will happen is ocelot_vcap_block_get_filter_index() will return the
index (@index) of the first filter found with that cookie. This is _not_
the index of _this_ filter, but the other one with the same cookie,
because ocelot_vcap_filter_equal() gets fooled.
Then later, ocelot_vcap_block_remove_filter() is coded to remove all
filters that are ocelot_vcap_filter_equal() with the passed @filter.
So unexpectedly, both filters get deleted from the list.
Then ocelot_vcap_filter_del() will attempt to move all the other filters
up, again finding them by index (@i). The block count is 2, @index was 0,
so it will attempt to move up filter @i=0 and @i=1. It assigns tmp =
ocelot_vcap_block_find_filter_by_index(block, i), which is now a NULL
pointer because ocelot_vcap_block_remove_filter() has removed more than
one filter.
As far as I can see, this problem has been there since the introduction
of tc offload support, however I cannot test beyond the blamed commit
due to hardware availability. In any case, any fix cannot be backported
that far, due to lots of changes to the code base.
Therefore, let's go for the correct solution, which is to not call
ocelot_vcap_filter_add() and ocelot_vcap_filter_del(), unless the filter
is actually unique and not shared. For the shared filters, we should
just modify the ingress port mask and call ocelot_vcap_filter_replace(),
a function introduced by commit 95706be13b9f ("net: mscc: ocelot: create
a function that replaces an existing VCAP filter"). This way,
block->rules will only contain filters with unique cookies, by design.
Fixes: 07d985eef073 ("net: dsa: felix: Wire up the ocelot cls_flower methods")
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Prepare input updates for 5.17 merge window.
|
|
Merge misc updates from Andrew Morton:
"146 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak,
dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap,
memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb,
userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp,
ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and
damon)"
* emailed patches from Andrew Morton <[email protected]>: (146 commits)
mm/damon: hide kernel pointer from tracepoint event
mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log
mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging
mm/damon/dbgfs: remove an unnecessary variable
mm/damon: move the implementation of damon_insert_region to damon.h
mm/damon: add access checking for hugetlb pages
Docs/admin-guide/mm/damon/usage: update for schemes statistics
mm/damon/dbgfs: support all DAMOS stats
Docs/admin-guide/mm/damon/reclaim: document statistics parameters
mm/damon/reclaim: provide reclamation statistics
mm/damon/schemes: account how many times quota limit has exceeded
mm/damon/schemes: account scheme actions that successfully applied
mm/damon: remove a mistakenly added comment for a future feature
Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts
Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning
Docs/admin-guide/mm/damon/usage: remove redundant information
Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks
mm/damon: convert macro functions to static inline functions
mm/damon: modify damon_rand() macro to static inline function
mm/damon: move damon_rand() definition into damon.h
...
|
|
bitmap_for_each_{set,clear}_region() are similar to for_each_bit()
macros in include/linux/find.h, but interface and implementation
of them are different.
This patch adds for_each_bitrange() macros and drops unused
bitmap_*_region() API in sake of unification.
Signed-off-by: Yury Norov <[email protected]>
Tested-by: Wolfram Sang <[email protected]>
Acked-by: Dennis Zhou <[email protected]>
Acked-by: Ulf Hansson <[email protected]> # For MMC
|
|
A couple of kernel functions call for_each_*_bit_from() with start
bit equal to 0. Replace them with for_each_*_bit().
No functional changes, but might improve on readability.
Signed-off-by: Yury Norov <[email protected]>
Tested-by: Wolfram Sang <[email protected]>
|
|
cpumask_first() is a more effective analogue of 'next' version if n == -1
(which means start == 0). This patch replaces 'next' with 'first' where
things look trivial.
There's no cpumask_first_zero() function, so create it.
Signed-off-by: Yury Norov <[email protected]>
Tested-by: Wolfram Sang <[email protected]>
|
|
find_first{,_zero}_bit is a more effective analogue of 'next' version if
start == 0. This patch replaces 'next' with 'first' where things look
trivial.
Signed-off-by: Yury Norov <[email protected]>
Tested-by: Wolfram Sang <[email protected]>
|
|
Embrace ATTRIBUTE_GROUPS to avoid boiler plate code. This should not
introduce any functional changes.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Luis Chamberlain <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Reviewed-by: Sergey Senozhatsky <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Nitin Gupta <[email protected]>
Cc: Jens Axboe <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Use the newly added compound devmap facility which maps the assigned dax
ranges as compound pages at a page size of @align.
dax devices are created with a fixed @align (huge page size) which is
enforced through as well at mmap() of the device. Faults, consequently
happen too at the specified @align specified at the creation, and those
don't change throughout dax device lifetime. MCEs unmap a whole dax
huge page, as well as splits occurring at the configured page size.
Performance measured by gup_test improves considerably for
unpin_user_pages() and altmap with NVDIMMs:
$ gup_test -f /dev/dax1.0 -m 16384 -r 10 -S -a -n 512 -w
(pin_user_pages_fast 2M pages) put:~71 ms -> put:~22 ms
[altmap]
(pin_user_pages_fast 2M pages) get:~524ms put:~525 ms -> get: ~127ms put:~71ms
$ gup_test -f /dev/dax1.0 -m 129022 -r 10 -S -a -n 512 -w
(pin_user_pages_fast 2M pages) put:~513 ms -> put:~188 ms
[altmap with -m 127004]
(pin_user_pages_fast 2M pages) get:~4.1 secs put:~4.12 secs -> get:~1sec put:~563ms
.. as well as unpin_user_page_range_dirty_lock() being just as effective
as THP/hugetlb[0] pages.
[0] https://lore.kernel.org/linux-mm/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Joao Martins <[email protected]>
Reviewed-by: Dan Williams <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Dave Jiang <[email protected]>
Cc: Jane Chu <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: Vishal Verma <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
After moving the page mapping to be set prior to pte insertion, the pfn
in dev_dax_huge_fault() no longer is necessary. Remove it, as well as
the @pfn argument passed to the internal fault handler helpers.
[[email protected]: fix CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=n build]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Joao Martins <[email protected]>
Suggested-by: Christoph Hellwig <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Dave Jiang <[email protected]>
Cc: Jane Chu <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: Vishal Verma <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Normally, the @page mapping is set prior to inserting the page into a
page table entry. Make device-dax adhere to the same ordering, rather
than setting mapping after the PTE is inserted.
The address_space never changes and it is always associated with the
same inode and underlying pages. So, the page mapping is set once but
cleared when the struct pages are removed/freed (i.e. after
{devm_}memunmap_pages()).
Link: https://lkml.kernel.org/r/[email protected]
Suggested-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Joao Martins <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Dave Jiang <[email protected]>
Cc: Jane Chu <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: Vishal Verma <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Move initialization of page->mapping into a separate helper.
This is in preparation to move the mapping set to be prior to inserting
the page table entry and also for tidying up compound page handling into
one helper.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Joao Martins <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Dave Jiang <[email protected]>
Cc: Jane Chu <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: Vishal Verma <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Right now, only static dax regions have a valid @pgmap pointer in its
struct dev_dax. Dynamic dax case however, do not.
In preparation for device-dax compound devmap support, make sure that
dev_dax pgmap field is set after it has been allocated and initialized.
dynamic dax device have the @pgmap is allocated at probe() and it's
managed by devm (contrast to static dax region which a pgmap is provided
and dax core kfrees it). So in addition to ensure a valid @pgmap, clear
the pgmap when the dynamic dax device is released to avoid the same
pgmap ranges to be re-requested across multiple region device reconfigs.
Add a static_dev_dax() and use that helper in dev_dax_probe() to ensure
the initialization differences between dynamic and static regions are
more explicit. While at it, consolidate the ranges initialization when
we allocate the @pgmap for the dynamic dax region case. Also take the
opportunity to document the differences between static and dynamic da
regions.
Link: https://lkml.kernel.org/r/[email protected]
Suggested-by: Dan Williams <[email protected]>
Signed-off-by: Joao Martins <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Dave Jiang <[email protected]>
Cc: Jane Chu <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: Vishal Verma <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Use the struct_size() helper for the size of a struct with variable
array member at the end, rather than manually calculating it.
Link: https://lkml.kernel.org/r/[email protected]
Suggested-by: Dan Williams <[email protected]>
Signed-off-by: Joao Martins <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Dave Jiang <[email protected]>
Cc: Jane Chu <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: Vishal Verma <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Rather than calculating @pgoff manually, switch to ALIGN() instead.
Link: https://lkml.kernel.org/r/[email protected]
Suggested-by: Dan Williams <[email protected]>
Signed-off-by: Joao Martins <[email protected]>
Reviewed-by: Dan Williams <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Dave Jiang <[email protected]>
Cc: Jane Chu <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: Vishal Verma <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Reserved regions with direct mapping may contain references to other
regions. CMA region with fixed location is reserved without creating
kmemleak_object for it.
So add them as gray kmemleak objects.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Calvin Zhang <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Frank Rowand <[email protected]>
Cc: Catalin Marinas <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Replace kthread_create/kthread_bind/wake_up_process() with
kthread_run_on_cpu() to simplify the code.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Cai Huoqing <[email protected]>
Cc: Bernard Metzler <[email protected]>
Cc: Daniel Bristot de Oliveira <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Doug Ledford <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Joel Fernandes (Google) <[email protected]>
Cc: Josh Triplett <[email protected]>
Cc: Lai Jiangshan <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: "Paul E . McKenney" <[email protected]>
Cc: Steven Rostedt <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Modify the code such that ndev->cur_num_vqs better reflects the actual
number of data virtqueues. The value can be accurately realized after
features have been negotiated.
This is to prevent possible failures when modifying the RQT object if
the cur_num_vqs bears invalid value.
No issue was actually encountered but this also makes the code more
readable.
Fixes: c5a5cd3d3217 ("vdpa/mlx5: Support configuring max data virtqueue")
Signed-off-by: Eli Cohen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Si-Wei Liu<[email protected]>
Acked-by: Jason Wang <[email protected]>
|
|
Make sure the decision whether an index received through a callback is
valid or not consults the negotiated features.
The motivation for this was due to a case encountered where I shut down
the VM. After the reset operation was called features were already
clear, I got get_vq_state() call which caused out array bounds
access since is_index_valid() reported the index value.
So this is more of not hit a bug since the call shouldn't have been made
first place.
Signed-off-by: Eli Cohen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Si-Wei Liu<[email protected]>
Acked-by: Jason Wang <[email protected]>
|
|
Call reset using the wrapper function vdpa_reset() to make sure the
operation is serialized with cf_mutex.
This comes to protect from the following possible scenario:
vhost_vdpa_set_status() could call the reset op. Since the call is not
protected by cf_mutex, a netlink thread calling vdpa_dev_config_fill
could get passed the VIRTIO_CONFIG_S_FEATURES_OK check in
vdpa_dev_config_fill() and end up reporting wrong features.
Fixes: 5f6e85953d8f ("vdpa: Read device configuration only if FEATURES_OK")
Signed-off-by: Eli Cohen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Si-Wei Liu<[email protected]>
Acked-by: Jason Wang <[email protected]>
|
|
Avoid the wrapper holding cf_mutex since it is not protecting anything.
To avoid confusion and unnecessary overhead incurred by it, remove.
Fixes: f489f27bc0ab ("vdpa: Sync calls set/get config/status with cf_mutex")
Signed-off-by: Eli Cohen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Si-Wei Liu<[email protected]>
Acked-by: Jason Wang <[email protected]>
|
|
Configure max supported virtqueues features on the management device.
This info can be retrieved using:
$ vdpa mgmtdev show
vdpasim_net:
supported_classes net
max_supported_vqs 2
dev_features MAC ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
Signed-off-by: Eli Cohen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael S. Tsirkin <[email protected]>
Acked-by: Jason Wang <[email protected]>
|
|
All masks in this file are 64 bits. Change BIT to BIT_ULL.
Other occurences use (1 << val) which yields a 32 bit value. Change them
to use BIT_ULL too.
Reviewed-by: Si-Wei Liu <[email protected]>
Signed-off-by: Eli Cohen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael S. Tsirkin <[email protected]>
Acked-by: Jason Wang <[email protected]>
|
|
Configure max supported virtqueues on the management device.
Signed-off-by: Eli Cohen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael S. Tsirkin <[email protected]>
Acked-by: Jason Wang <[email protected]>
|