aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2014-01-05bnx2x: Clean before update RSS arrivesMichal Kalderon2-1/+7
When a PF receives a VF message indicating a change in RSS properties it should clean the flags' bit-fields; Otherwise, it's possible that some random values will be considered as flags by the lower layers configuring the RSS in FW. Signed-off-by: Michal Kalderon <michals@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05bnx2x: Correct number of MSI-X vectors for VFsMichal Kalderon1-3/+6
Number of VFs in PCIe configuration space is zero-based. Driver incorrectly sets the number of VFs to be larger by one than what actually is feasible by HW, which might cause later VFs to fail to allocate their MSI-X interrupts. Signed-off-by: Michal Kalderon <michals@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05bnx2x: limit number of interrupt vectors for 57711Dmitry Kravkov2-3/+5
Original straightforward division may lead to zeroing number of SB and null-pointer dereference when device is short of MSIX vectors or lacks MSIX capabilities. Reported-by: Vladislav Zolotarov <vladz@cloudius-systems.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03qlcnic: Fix bug in Tx completion pathShahed Shaikh4-7/+12
o Driver is using common tx_clean_lock for all Tx queues. This patch adds per queue tx_clean_lock. o Driver is not updating sw_consumer while processing Tx completion when interface is going down. Fixed in this patch. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03infiniband: make sure the src net is infiniband when create new linkHangbin Liu1-1/+2
When we create a new infiniband link with uninfiniband device, e.g. `ip link add link em1 type ipoib pkey 0x8001`. We will get a NULL pointer dereference cause other dev like Ethernet don't have struct ib_device. The code path is: rtnl_newlink |-- ipoib_new_child_link |-- __ipoib_vlan_add |-- ipoib_set_dev_features |-- ib_query_device Fix this bug by make sure the src net is infiniband when create new link. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03{vxlan, inet6} Mark vxlan_dev flags with VXLAN_F_IPV6 properlyfan.du1-1/+2
Even if user doesn't supply the physical netdev to attach vxlan dev to, and at the same time user want to vxlan sit top of IPv6, mark vxlan_dev flags with VXLAN_F_IPV6 to create IPv6 based socket. Otherwise kernel crashes safely every time spitting below messages, Steps to reproduce: ip link add vxlan0 type vxlan id 42 group ff0e::110 ip link set vxlan0 up [ 62.656266] BUG: unable to handle kernel NULL pointer dereference[ 62.656320] ip (3008) used greatest stack depth: 3912 bytes left at 0000000000000046 [ 62.656423] IP: [<ffffffff816d822d>] ip6_route_output+0xbd/0xe0 [ 62.656525] PGD 2c966067 PUD 2c9a2067 PMD 0 [ 62.656674] Oops: 0000 [#1] SMP [ 62.656781] Modules linked in: vxlan netconsole deflate zlib_deflate af_key [ 62.657083] CPU: 1 PID: 2128 Comm: whoopsie Not tainted 3.12.0+ #182 [ 62.657083] Hardware name: innotek GmbH VirtualBox, BIOS VirtualBox 12/01/2006 [ 62.657083] task: ffff88002e2335d0 ti: ffff88002c94c000 task.ti: ffff88002c94c000 [ 62.657083] RIP: 0010:[<ffffffff816d822d>] [<ffffffff816d822d>] ip6_route_output+0xbd/0xe0 [ 62.657083] RSP: 0000:ffff88002fd038f8 EFLAGS: 00210296 [ 62.657083] RAX: 0000000000000000 RBX: ffff88002fd039e0 RCX: 0000000000000000 [ 62.657083] RDX: ffff88002fd0eb68 RSI: ffff88002fd0d278 RDI: ffff88002fd0d278 [ 62.657083] RBP: ffff88002fd03918 R08: 0000000002000000 R09: 0000000000000000 [ 62.657083] R10: 00000000000001ff R11: 0000000000000000 R12: 0000000000000001 [ 62.657083] R13: ffff88002d96b480 R14: ffffffff81c8e2c0 R15: 0000000000000001 [ 62.657083] FS: 0000000000000000(0000) GS:ffff88002fd00000(0063) knlGS:00000000f693b740 [ 62.657083] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 62.657083] CR2: 0000000000000046 CR3: 000000002c9d2000 CR4: 00000000000006e0 [ 62.657083] Stack: [ 62.657083] ffff88002fd03a40 ffffffff81c8e2c0 ffff88002fd039e0 ffff88002d96b480 [ 62.657083] ffff88002fd03958 ffffffff816cac8b ffff880019277cc0 ffff8800192b5d00 [ 62.657083] ffff88002d5bc000 ffff880019277cc0 0000000000001821 0000000000000001 [ 62.657083] Call Trace: [ 62.657083] <IRQ> [ 62.657083] [<ffffffff816cac8b>] ip6_dst_lookup_tail+0xdb/0xf0 [ 62.657083] [<ffffffff816caea0>] ip6_dst_lookup+0x10/0x20 [ 62.657083] [<ffffffffa0020c13>] vxlan_xmit_one+0x193/0x9c0 [vxlan] [ 62.657083] [<ffffffff8137b3b7>] ? account+0xc7/0x1f0 [ 62.657083] [<ffffffffa0021513>] vxlan_xmit+0xd3/0x400 [vxlan] [ 62.657083] [<ffffffff8161390d>] dev_hard_start_xmit+0x49d/0x5e0 [ 62.657083] [<ffffffff81613d29>] dev_queue_xmit+0x2d9/0x480 [ 62.657083] [<ffffffff817cb854>] ? _raw_write_unlock_bh+0x14/0x20 [ 62.657083] [<ffffffff81630565>] ? eth_header+0x35/0xe0 [ 62.657083] [<ffffffff8161bc5e>] neigh_resolve_output+0x11e/0x1e0 [ 62.657083] [<ffffffff816ce0e0>] ? ip6_fragment+0xad0/0xad0 [ 62.657083] [<ffffffff816cb465>] ip6_finish_output2+0x2f5/0x470 [ 62.657083] [<ffffffff816ce166>] ip6_finish_output+0x86/0xc0 [ 62.657083] [<ffffffff816ce218>] ip6_output+0x78/0xb0 [ 62.657083] [<ffffffff816eadd6>] mld_sendpack+0x256/0x2a0 [ 62.657083] [<ffffffff816ebd8c>] mld_ifc_timer_expire+0x17c/0x290 [ 62.657083] [<ffffffff816ebc10>] ? igmp6_timer_handler+0x80/0x80 [ 62.657083] [<ffffffff816ebc10>] ? igmp6_timer_handler+0x80/0x80 [ 62.657083] [<ffffffff81051065>] call_timer_fn+0x45/0x150 [ 62.657083] [<ffffffff816ebc10>] ? igmp6_timer_handler+0x80/0x80 [ 62.657083] [<ffffffff81052353>] run_timer_softirq+0x1f3/0x2a0 [ 62.657083] [<ffffffff8102dfd8>] ? lapic_next_event+0x18/0x20 [ 62.657083] [<ffffffff8109e36f>] ? clockevents_program_event+0x6f/0x110 [ 62.657083] [<ffffffff8104a2f6>] __do_softirq+0xd6/0x2b0 [ 62.657083] [<ffffffff8104a75e>] irq_exit+0x7e/0xa0 [ 62.657083] [<ffffffff8102ea15>] smp_apic_timer_interrupt+0x45/0x60 [ 62.657083] [<ffffffff817d3eca>] apic_timer_interrupt+0x6a/0x70 [ 62.657083] <EOI> [ 62.657083] [<ffffffff817d4a35>] ? sysenter_dispatch+0x7/0x1a [ 62.657083] Code: 4d 8b 85 a8 02 00 00 4c 89 e9 ba 03 04 00 00 48 c7 c6 c0 be 8d 81 48 c7 c7 48 35 a3 81 31 c0 e8 db 68 0e 00 49 8b 85 a8 02 00 00 <0f> b6 40 46 c0 e8 05 0f b6 c0 c1 e0 03 41 09 c4 e9 77 ff ff ff [ 62.657083] RIP [<ffffffff816d822d>] ip6_route_output+0xbd/0xe0 [ 62.657083] RSP <ffff88002fd038f8> [ 62.657083] CR2: 0000000000000046 [ 62.657083] ---[ end trace ba8a9583d7cd1934 ]--- [ 62.657083] Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Fan Du <fan.du@windriver.com> Reported-by: Ryan Whelan <rcwhelan@gmail.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03cxgb4: allow large buffer size to have page sizeThadeu Lima de Souza Cascardo1-1/+1
Since commit 52367a763d8046190754ab43743e42638564a2d1 ("cxgb4/cxgb4vf: Code cleanup to enable T4 Configuration File support"), we have failures like this during cxgb4 probe: cxgb4 0000:01:00.4: bad SGE FL page buffer sizes [65536, 65536] cxgb4: probe of 0000:01:00.4 failed with error -22 This happens whenever software parameters are used, without a configuration file. That happens when the hardware was already initialized (after kexec, or after csiostor is loaded). It happens that these values are acceptable, rendering fl_pg_order equal to 0, which is the case of a hard init when the page size is equal or larger than 65536. Accepting fl_large_pg equal to fl_small_pg solves the issue, and shouldn't cause any trouble besides a possible performance reduction when smaller pages are used. And that can be fixed by a configuration file. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-02virtio-net: fix refill races during restoreJason Wang1-5/+6
During restoring, try_fill_recv() was called with neither napi lock nor napi disabled. This can lead two try_fill_recv() was called in the same time. Fix this by refilling before trying to enable napi. Fixes 0741bcb5584f9e2390ae6261573c4de8314999f2 (virtio: net: Add freeze, restore handlers to support S4). Cc: Amit Shah <amit.shah@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-02qlcnic: Fix resource allocation for TX queuesManish Chopra1-1/+2
o TX queues allocation was getting distributed equally among all the functions of the port including VFs and PF. Which was leading to failure in PF's multiple TX queues creation. o Instead of dividing queues equally allocate one TX queue for each VF as VF doesn't support multiple TX queues. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-02qlcnic: Fix loopback diagnostic testManish Chopra3-6/+7
o Adapter requires that if the port is in loopback mode no traffic should be flowing through that port, so on arrival of Link up AEN, do not advertise Link up to the stack until port is out of loopback mode Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01bnx2x: Fix KR2 work-around detection of BCM8073Yaniv Rosner1-1/+1
KR2 work-around is based on detecting non-KR2 devices which may not link up in this mode. One such link-partner is the BCM8073 which has specific advertisement characteristics in specific mode, and this condition was not set correctly. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01bnx2x: Fix incorrect link-up reportYaniv Rosner1-0/+4
Fix a problem where link is reported to be up when SFP+ module is plugged in without cable. This occurs with specific module types which may generate temporary TX_FAULT indication. Solution is to avoid changing any link parameters when checking TX_FAULT indication while physical link is down. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01bnx2x: Fix Duplex setting for 54618seYaniv Rosner1-26/+28
BCM54618SE is used to advertise half-duplex even if HD was not requested by the user. This change makes the legacy speed/duplex advertisement for this PHY exactly according to the requested speed and duplex. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01bnx2x: Fix passive DAC cable detectionYaniv Rosner1-9/+12
Fix Passive DAC detection for specific cables, such that even in case SFP_CABLE_TECHNOLOGY option is not set in the EEPROM (offset 8), treat it as a passive DAC cable, since some cables don't have this indication. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01bnx2x: Fix 578xx-KR 1G linkYaniv Rosner2-0/+14
Fix a problem where 578xx-KR is unable to get link when connected to 1G link partner. Two fixes were required: One was to force CL37 sync_status low to prevent Warpcore from getting stuck in CL73 parallel detect loop while link partner is sending. Second fix was to enable auto-detect mode, thus allowing the Warpcore to select the higher speed protocol between 10G-KR (over CL73), or go down to 1G over CL73 when there's indication for it. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-31usbnet: mcs7830: rework link state detectionOctavian Purdila1-15/+4
Even with the quirks in commit dabdaf0c (mcs7830: Fix link state detection) there are still spurious link-down events for some chips where the false link-down events count go over a few hundreds. This patch takes a more conservative approach and only looks at link-down events where the link-down state is not combined with other states (e.g. half/full speed, pending frames in SRAM or TX status information valid). In all other cases we assume the link is up. Tested on MCS7830CV-DA (USB ID 9710:7830). Cc: Ondrej Zary <linux@rainbow-software.org> Cc: Michael Leun <lkml20120218@newton.leun.net> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-30Merge tag 'dt-fixes-for-3.13' of ↵Linus Torvalds4-15/+12
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Fix 2 regressions found on PPC - Allow NULL ptr in unflatten_and_copy_device_tree - Update my email address * tag 'dt-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: MAINTAINERS: Update Rob Herring's email address of/irq: Fix device_node refcount in of_irq_parse_raw() of/Kconfig: Spelling s/one/once/ Revert "of/address: Handle #address-cells > 2 specially" of: Fix NULL dereference in unflatten_and_copy()
2013-12-30Merge remote-tracking branch 'grant/devicetree/merge' into dt-fixesRob Herring1-2/+10
2013-12-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds39-193/+559
Pull networking fixes from David Miller: "Some holiday bug fixes for 3.13... There is still one bug I'd like to get fixed before 3.13-final. The vlan code erroneously assignes the header ops of the underlying real device to the VLAN device above it when the real device can hardware offload VLAN handling. That's completely bogus because header ops are tied to the device type, so they only expect to see a 'dev' argument compatible with their ops. The fix is the have the VLAN code use a special set of header ops that does the pass-thru correctly, by calling the underlying real device's header ops but _also_ passing in the real device instead of the VLAN device. That fix is currently waiting some testing. Anyways, of note here: 1) Fix bitmap edge case in radiotap, from Johannes Berg. 2) Fix oops on driver unload in rtlwifi, from Larry Finger. 3) Bonding doesn't do locking correctly during speed/duplex/link changes, from Ding Tianhong. 4) Fix header parsing in GRE code, this bug has been around for a few releases. From Timo Teräs. 5) SIT tunnel driver MTU check needs to take GSO into account, from Eric Dumazet. 6) Minor info leak in inet_diag, from Daniel Borkmann. 7) Info leak in YAM hamradio driver, from Salva Peiró. 8) Fix route expiration state handling in ipv6 routing code, from Li RongQing. 9) DCCP probe module does not check request_module()'s return value, from Wang Weidong. 10) cpsw driver passes NULL device names to request_irq(), from Mugunthan V N. 11) Prevent a NULL splat in RDS binding code, from Sasha Levin. 12) Fix 4G overflow test in tg3 driver, from Nithin Sujir. 13) Cure use after free in arc_emac and fec driver's software timestamp handling, from Eric Dumazet. 14) SIT driver can fail to release the route when iptunnel_handle_offloads() throws an error. From Li RongQing. 15) Several batman-adv fixes from Simon Wunderlich and Antonio Quartulli. 16) Fix deadlock during TIPC socket release, from Ying Xue. 17) Fix regression in ROSE protocol recvmsg() msg_name handling, from Florian Westphal. 18) stmmac PTP support releases wrong spinlock, from Vince Bridgers" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits) stmmac: Fix incorrect spinlock release and PTP cap detection. phy: IRQ cannot be shared net: rose: restore old recvmsg behavior xen-netback: fix guest-receive-side array sizes fec: Do not assume that PHY reset is active low tipc: fix deadlock during socket release netfilter: nf_tables: fix wrong datatype in nft_validate_data_load() batman-adv: fix vlan header access batman-adv: clean nf state when removing protocol header batman-adv: fix alignment for batadv_tvlv_tt_change batman-adv: fix size of batadv_bla_claim_dst batman-adv: fix size of batadv_icmp_header batman-adv: fix header alignment by unrolling batadv_header batman-adv: fix alignment for batadv_coded_packet netfilter: nf_tables: fix oops when updating table with user chains netfilter: nf_tables: fix dumping with large number of sets ipv6: release dst properly in ipip6_tunnel_xmit netxen: Correct off-by-one errors in bounds checks net: Add some clarification to skb_tx_timestamp() comment. arc_emac: fix potential use after free ...
2013-12-30of/irq: Fix device_node refcount in of_irq_parse_raw()Cédric Le Goater1-4/+1
Commit 2361613206e6, "of/irq: Refactor interrupt-map parsing" changed the refcount on the device_node causing an error in of_node_put(): ERROR: Bad of_node_put() on /pci@800000020000000 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-rc3-dirty #2 Call Trace: [c00000003e403500] [c0000000000144fc] .show_stack+0x7c/0x1f0 (unreliable) [c00000003e4035d0] [c00000000070f250] .dump_stack+0x88/0xb4 [c00000003e403650] [c0000000005e8768] .of_node_release+0xd8/0xf0 [c00000003e4036e0] [c0000000005eeafc] .of_irq_parse_one+0x10c/0x280 [c00000003e4037a0] [c0000000005efd4c] .of_irq_parse_pci+0x3c/0x1d0 [c00000003e403840] [c000000000038240] .pcibios_setup_device+0xa0/0x2e0 [c00000003e403910] [c0000000000398f0] .pcibios_setup_bus_devices+0x60/0xd0 [c00000003e403990] [c00000000003b3a4] .__of_scan_bus+0x1a4/0x2b0 [c00000003e403a80] [c00000000003a62c] .pcibios_scan_phb+0x30c/0x410 [c00000003e403b60] [c0000000009fe430] .pcibios_init+0x7c/0xd4 This patch adjusts the refcount in the walk of the interrupt tree. When a match is found, there is no need to increase the refcount on 'out_irq->np' as 'newpar' is already holding a ref. The refcount balance between 'ipar' and 'newpar' is maintained in the skiplevel: goto label. This patch also removes the usage of the device_node variable 'old' which seems useless after the latest changes. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2013-12-30of/Kconfig: Spelling s/one/once/Geert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: Rob Herring <robh@kernel.org>
2013-12-30Revert "of/address: Handle #address-cells > 2 specially"Rob Herring1-8/+0
This reverts commit e38c0a1fbc5803cbacdaac0557c70ac8ca5152e7. Nikita Yushchenko reports: While trying to make freescale p2020ds and mpc8572ds boards working with mainline kernel, I faced that commit e38c0a1f (Handle Both these boards have uli1575 chip. Corresponding part in device tree is something like uli1575@0 { reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; ranges = <0x2000000 0x0 0x80000000 0x2000000 0x0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x0 0x1000000 0x0 0x0 0x0 0x10000>; isa@1e { ... I.e. it has #address-cells = <3> With commit e38c0a1f reverted, devices under uli1575 are registered correctly, e.g. for rtc OF: ** translation for device /pcie@ffe09000/pcie@0/uli1575@0/isa@1e/rtc@70 ** OF: bus is isa (na=2, ns=1) on /pcie@ffe09000/pcie@0/uli1575@0/isa@1e OF: translating address: 00000001 00000070 OF: parent bus is default (na=3, ns=2) on /pcie@ffe09000/pcie@0/uli1575@0 OF: walking ranges... OF: ISA map, cp=0, s=1000, da=70 OF: parent translation for: 01000000 00000000 00000000 OF: with offset: 70 OF: one level translation: 00000000 00000000 00000070 OF: parent bus is pci (na=3, ns=2) on /pcie@ffe09000/pcie@0 OF: walking ranges... OF: default map, cp=a0000000, s=20000000, da=70 OF: default map, cp=0, s=10000, da=70 OF: parent translation for: 01000000 00000000 00000000 OF: with offset: 70 OF: one level translation: 01000000 00000000 00000070 OF: parent bus is pci (na=3, ns=2) on /pcie@ffe09000 OF: walking ranges... OF: PCI map, cp=0, s=10000, da=70 OF: parent translation for: 01000000 00000000 00000000 OF: with offset: 70 OF: one level translation: 01000000 00000000 00000070 OF: parent bus is default (na=2, ns=2) on / OF: walking ranges... OF: PCI map, cp=0, s=10000, da=70 OF: parent translation for: 00000000 ffc10000 OF: with offset: 70 OF: one level translation: 00000000 ffc10070 OF: reached root node With commit e38c0a1f in place, address translation fails: OF: ** translation for device /pcie@ffe09000/pcie@0/uli1575@0/isa@1e/rtc@70 ** OF: bus is isa (na=2, ns=1) on /pcie@ffe09000/pcie@0/uli1575@0/isa@1e OF: translating address: 00000001 00000070 OF: parent bus is default (na=3, ns=2) on /pcie@ffe09000/pcie@0/uli1575@0 OF: walking ranges... OF: ISA map, cp=0, s=1000, da=70 OF: parent translation for: 01000000 00000000 00000000 OF: with offset: 70 OF: one level translation: 00000000 00000000 00000070 OF: parent bus is pci (na=3, ns=2) on /pcie@ffe09000/pcie@0 OF: walking ranges... OF: default map, cp=a0000000, s=20000000, da=70 OF: default map, cp=0, s=10000, da=70 OF: not found ! Thierry Reding confirmed this commit was not needed after all: "We ended up merging a different address representation for Tegra PCIe and I've confirmed that reverting this commit doesn't cause any obvious regressions. I think all other drivers in drivers/pci/host ended up copying what we did on Tegra, so I wouldn't expect any other breakage either." There doesn't appear to be a simple way to support both behaviours, so reverting this as nothing should be depending on the new behaviour. Cc: stable@vger.kernel.org # v3.7+ Signed-off-by: Rob Herring <robh@kernel.org>
2013-12-29stmmac: Fix incorrect spinlock release and PTP cap detection.Vince Bridgers2-13/+11
This patch corrects a problem in stmmac_ptp.c, functions stmmac_adjust_time and stmmac_adjust_freq where the incorrect spinlocks were released. This patch also addresses a problem in stmmac_main, function stmmac_init_ptp where the capability detection for advanced timestamping was masked by message masking. This patch was touch tested using linuxptp, and runs without the previously observed instabilities. More extensive testing is ongoing. Vince Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-29phy: IRQ cannot be sharedSergei Shtylyov1-4/+2
With the way PHY IRQ handler is implemented (all real handling being pushed to the workqueue and returning IRQ_HANDLED all the time PHY is active), we cannot really claim that PHY IRQ can be shared when calling request_irq(). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-29xen-netback: fix guest-receive-side array sizesPaul Durrant3-7/+24
The sizes chosen for the metadata and grant_copy_op arrays on the guest receive size are wrong; - The meta array is needlessly twice the ring size, when we only ever consume a single array element per RX ring slot - The grant_copy_op array is way too small. It's sized based on a bogus assumption: that at most two copy ops will be used per ring slot. This may have been true at some point in the past but it's clear from looking at start_new_rx_buffer() that a new ring slot is only consumed if a frag would overflow the current slot (plus some other conditions) so the actual limit is MAX_SKB_FRAGS grant_copy_ops per ring slot. This patch fixes those two sizing issues and, because grant_copy_ops grows so much, it pulls it out into a separate chunk of vmalloc()ed memory. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-29fec: Do not assume that PHY reset is active lowFabio Estevam1-4/+10
We should not assume that the PHY reset is always active low. Retrieve this information from the device tree instead, so that the PHY reset can work on both cases. Reported-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-29Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds6-6/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "There is a small EFI fix and a big power regression fix in this batch. My queue also had a fix for downing a CPU when there are insufficient number of IRQ vectors available, but I'm holding that one for now due to recent bug reports" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Don't select EFI from certain special ACPI drivers x86 idle: Repair large-server 50-watt idle-power regression
2013-12-29Merge tag 'pm+acpi-3.13-rc6' of ↵Linus Torvalds4-34/+50
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes and new device IDs from Rafael Wysocki: - Fix for a cpufreq regression causing stale sysfs files to be left behind during system resume if cpufreq_add_dev() fails for one or more CPUs from Viresh Kumar. - Fix for a bug in cpufreq causing CONFIG_CPU_FREQ_DEFAULT_* to be ignored when the intel_pstate driver is used from Jason Baron. - System suspend fix for a memory leak in pm_vt_switch_unregister() that forgot to release objects after removing them from pm_vt_switch_list. From Masami Ichikawa. - Intel Valley View device ID and energy unit encoding update for the (recently added) Intel RAPL (Running Average Power Limit) driver from Jacob Pan. - Intel Bay Trail SoC GPIO and ACPI device IDs for the Low Power Subsystem (LPSS) ACPI driver from Paul Drews. * tag 'pm+acpi-3.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: powercap / RAPL: add support for ValleyView Soc PM / sleep: Fix memory leak in pm_vt_switch_unregister(). cpufreq: Use CONFIG_CPU_FREQ_DEFAULT_* to set initial policy for setpolicy drivers cpufreq: remove sysfs files for CPUs which failed to come back after resume ACPI: Add BayTrail SoC GPIO and LPSS ACPI IDs
2013-12-27netxen: Correct off-by-one errors in bounds checksDavid Gibson1-2/+2
netxen_process_lro() contains two bounds checks. One for the ring number against the number of rings, and one for the Rx buffer ID against the array of receive buffers. Both of these have off-by-one errors, using > instead of >=. The correct versions are used in netxen_process_rcv(), they're just wrong in netxen_process_lro(). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-27arc_emac: fix potential use after freeEric Dumazet1-2/+2
Signed-off-by: Eric Dumazet <edumazet@google.com> skb_tx_timestamp(skb) should be called _before_ TX completion has a chance to trigger, otherwise it is too late and we access freed memory. Fixes: e4f2379db6c6 ("ethernet/arc/arc_emac - Add new driver") From: Eric Dumazet <edumazet@google.com> Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-27tg3: Expand 4g_overflow_test workaround to skb fragments of any size.Nithin Sujir1-1/+1
The current driver assumes that an skb fragment can only be upto jumbo size. Presumably this was a fast-path optimization. This assumption is no longer true as fragments can be upto 32k. v2: Remove unnecessary parantheses per Eric Dumazet. Cc: stable@vger.kernel.org Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-27Merge branches 'powercap' and 'acpi-lpss' with new device IDsRafael J. Wysocki3-2/+13
* powercap: powercap / RAPL: add support for ValleyView Soc * acpi-lpss: ACPI: Add BayTrail SoC GPIO and LPSS ACPI IDs
2013-12-27Merge branches 'pm-cpufreq' and 'pm-sleep' containing PM fixesRafael J. Wysocki1-32/+37
* pm-cpufreq: cpufreq: Use CONFIG_CPU_FREQ_DEFAULT_* to set initial policy for setpolicy drivers cpufreq: remove sysfs files for CPUs which failed to come back after resume * pm-sleep: PM / sleep: Fix memory leak in pm_vt_switch_unregister().
2013-12-26macvlan: fix netdev feature propagation from lower deviceFlorian Westphal1-3/+13
There are inconsistencies wrt. feature propagation/inheritance between macvlan and the underlying interface. When a feature is turned off on the real device before a macvlan is created on top, these will remain enabled on the macvlan device, whereas turning off the feature on the lower device after macvlan creation the kernel will propagate the changes to the macvlan. The second issue is that, when propagating changes from underlying device to the macvlan interface, macvlan can erronously lose its NETIF_F_LLTX flag, as features are anded with the underlying device. However, LLTX should be kept since it has no dependencies on physical hardware (LLTX is set on macvlan creation regardless of the lower device properties, see 8ffab51b3dfc54876f145f15b351c41f3f703195 (macvlan: lockless tx path). The LLTX flag is now forced regardless of user settings in absence of layer2 hw acceleration (a6cc0cfa72e0b6d9f2c8fd858aa, net: Add layer 2 hardware acceleration operations for macvlan devices). Use netdev_increment_features to rebuild the feature set on capability changes on either the lower device or on the macvlan interface. As pointed out by Ben Hutchings, use netdev_update_features on NETDEV_FEAT_CHANGE event (it calls macvlan_fix_features/netdev_features_change if needed). Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-24Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds11-94/+189
Pull block fixes from Jens Axboe: - fix for a memory leak on certain unplug events - a collection of bcache fixes from Kent and Nicolas - a few null_blk fixes and updates form Matias - a marking of static of functions in the stec pci-e driver * 'for-linus' of git://git.kernel.dk/linux-block: null_blk: support submit_queues on use_per_node_hctx null_blk: set use_per_node_hctx param to false null_blk: corrections to documentation null_blk: warning on ignored submit_queues param null_blk: refactor init and init errors code paths null_blk: documentation null_blk: mem garbage on NUMA systems during init drivers: block: Mark the functions as static in skd_main.c bcache: New writeback PD controller bcache: bugfix for race between moving_gc and bucket_invalidate bcache: fix for gc and writeback race bcache: bugfix - moving_gc now moves only correct buckets bcache: fix for gc crashing when no sectors are used bcache: Fix heap_peek() macro bcache: Fix for can_attach_cache() bcache: Fix dirty_data accounting bcache: Use uninterruptible sleep in writeback bcache: kthread don't set writeback task to INTERUPTIBLE block: fix memory leaks on unplugging block device bcache: fix sparse non static symbol warning
2013-12-24Merge branch 'for-3.13-fixes' of ↵Linus Torvalds4-12/+49
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "There's one interseting commit - "libata, freezer: avoid block device removal while system is frozen". It's an ugly hack working around a deadlock condition between driver core resume and block layer device removal paths through freezer which was made more reproducible by writeback being converted to workqueue some releases ago. The bug has nothing to do with libata but it's just an workaround which is easy to backport. After discussion, Rafael and I seem to agree that we don't really need kernel freezables - both kthread and workqueue. There are few specific workqueues which constitute PM operations and require freezing, which will be converted to use workqueue_set_max_active() instead. All other kernel freezer uses are planned to be removed, followed by the removal of kthread and workqueue freezer support, hopefully. Others are device-specific fixes. The most notable is the addition of NO_NCQ_TRIM which is used to disable queued TRIM commands to Micro M500 SSDs which otherwise suffers data corruption" * 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata, freezer: avoid block device removal while system is frozen libata: implement ATA_HORKAGE_NO_NCQ_TRIM and apply it to Micro M500 SSDs libata: disable a disk via libata.force params ahci: bail out on ICH6 before using AHCI BAR ahci: imx: Explicitly clear IMX6Q_GPR13_SATA_MPLL_CLK_EN libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for Seagate Momentus SpinPoint M8
2013-12-23Merge tag 'rdma-for-linus' of ↵Linus Torvalds5-15/+52
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband fixes from Roland Dreier: "Last batch of InfiniBand/RDMA changes for 3.13 / 2014: - Additional checks for uverbs to ensure forward compatibility, handle malformed input better. - Fix potential use-after-free in iWARP connection manager. - Make a function static" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/uverbs: Check access to userspace response buffer in extended command IB/uverbs: Check input length in flow steering uverbs IB/uverbs: Set error code when fail to consume all flow_spec items IB/uverbs: Check reserved fields in create_flow IB/uverbs: Check comp_mask in destroy_flow IB/uverbs: Check reserved field in extended command header IB/uverbs: New macro to set pointers to NULL if length is 0 in INIT_UDATA() IB/core: const'ify inbuf in struct ib_udata RDMA/iwcm: Don't touch cm_id after deref in rem_ref RDMA/cxgb4: Make _c4iw_write_mem_dma() static
2013-12-23Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds11-34/+93
Pull drm fixes from Dave Airlie: "Xmas fixes pull, all small nothing major, intel, radeon, one ttm regression, and one build fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/ttm: Fix swapin regression gpu: fix qxl missing crc32_le drm/radeon: fix asic gfx values for scrapper asics drm/i915: Use the correct GMCH_CTRL register for Sandybridge+ drm/radeon: check for 0 count in speaker allocation and SAD code drm/radeon/dpm: disable ss on Cayman drm/radeon/dce6: set correct number of audio pins drm/i915: get a PC8 reference when enabling the power well drm/i915: change CRTC assertion on LCPLL disable drm/i915: Fix erroneous dereference of batch_obj inside reset_status drm/i915: Prevent double unref following alloc failure during execbuffer
2013-12-23Merge tag 'fixes-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio balloon driver fixes from Rusty Russell: "Refactoring broke the balloon driver, and fixing kallsyms on ARM broke some (non-ARM) MMUless setups, so we're making that fix ARM-only for now. Unfortunately, the ARM refactoring which broke kallsyms/perf was CC:stable, so the fix (which broken non-ARM) was also CC:stable, so now the partial reversion is also CC:stable..." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: scripts/link-vmlinux.sh: only filter kernel symbols for arm virtio_balloon: update_balloon_size(): update correct field
2013-12-23Merge branches 'cxgb4', 'flowsteer' and 'misc' into for-linusRoland Dreier4-14/+51
2013-12-23Merge tag 'drm-intel-fixes-2013-12-18' of ↵Dave Airlie4-23/+60
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Besides the 2 fixes for tricky corner cases in gem from Chris I've promised already two patche from Paulo to fix pc8 warnings (both ported from -next, bug report from Dave Jones) and one patch from to fix vga enable/disable on snb+. That one is a really old bug, but apparently it can cause machine hangs if you try hard enough with vgacon/efifb handover. * tag 'drm-intel-fixes-2013-12-18' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Use the correct GMCH_CTRL register for Sandybridge+ drm/i915: get a PC8 reference when enabling the power well drm/i915: change CRTC assertion on LCPLL disable drm/i915: Fix erroneous dereference of batch_obj inside reset_status drm/i915: Prevent double unref following alloc failure during execbuffer
2013-12-23Merge branch 'drm-fixes-3.13' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie4-9/+29
into drm-fixes - fix for a long standing corruption bug on some Trinity/Richland parts. - Stability fix for cayman dpm - audio fixes for dce6+ * 'drm-fixes-3.13' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix asic gfx values for scrapper asics drm/radeon: check for 0 count in speaker allocation and SAD code drm/radeon/dpm: disable ss on Cayman drm/radeon/dce6: set correct number of audio pins
2013-12-23drm/ttm: Fix swapin regressionThomas Hellstrom1-1/+2
Commit "drm/ttm: Don't move non-existing data" didn't take the swapped-out corner case into account. This patch corrects that. Fixes blank screen after attempted suspend / hibernate on vmwgfx. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-12-23gpu: fix qxl missing crc32_leRandy Dunlap2-1/+2
Fix build error: qxl uses crc32 functions so it needs to select CRC32. Also use angle quotes around a kernel header file name. drivers/built-in.o: In function `qxl_display_read_client_monitors_config': (.text+0x19d754): undefined reference to `crc32_le' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-12-22drivers: net : cpsw: pass proper device name while requesting irqMugunthan V N1-1/+1
During checking the interrupts with "cat /proc/interrupts", it is showing device name as (null), this change was done with commit id aa1a15e2d where request_irq is changed to devm_request_irq also changing the irq name from platform device name to net device name, but the net device is not registered at this point with the network frame work, so devm_request_irq is called with device name as NULL, by which it is showed as "(null)" in "cat /proc/interrupts". So this patch changes back irq name to platform device name itself in devm_request_irq so that the device name shows as below. Previous to this patch root@am335x-evm:~# cat /proc/interrupts CPU0 28: 2265 INTC 12 edma 30: 80 INTC 14 edma_error 56: 0 INTC 40 (null) 57: 1794 INTC 41 (null) 58: 7 INTC 42 (null) 59: 0 INTC 43 (null) With this patch root@am335x-evm:~# cat /proc/interrupts CPU0 28: 213 INTC 12 edma 30: 9 INTC 14 edma_error 56: 0 INTC 40 4a100000.ethernet 57: 16097 INTC 41 4a100000.ethernet 58: 11964 INTC 42 4a100000.ethernet 59: 0 INTC 43 4a100000.ethernet Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22RDMA/cxgb4: Use cxgb4_select_ntuple to correctly calculate ntuple fieldsKumar Sanghvi1-54/+17
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22RDMA/cxgb4: Server filters are supported only for IPv4Kumar Sanghvi1-1/+2
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22RDMA/cxgb4: Calculate the filter server TID properlyKumar Sanghvi1-3/+1
Based on original work by Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22cxgb4: Add API to correctly calculate tuple fieldsKumar Sanghvi6-16/+235
Adds API cxgb4_select_ntuple so as to enable Upper Level Drivers to correctly calculate the tuple fields. Adds constant definitions for TP_VLAN_PRI_MAP for the Compressed Filter Tuple field widths and structures and uses them. Also, the CPL Parameters field for T5 is 40 bits so we need to prototype cxgb4_select_ntuple() to calculate and return u64 values. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22cxgb4: Account for stid entries properly in case of IPv6Kumar Sanghvi1-2/+12
IPv6 uses 2 TIDs with CLIP enabled and 4 TIDs without CLIP. Currently we are incrementing STIDs in use by 1 for both IPv4 and IPv6 which is wrong. Further, driver currently does not have interface to query if CLIP is programmed for particular IPv6 address. So, in this patch we increment/decrement TIDs in use by 4 for IPv6 assuming absence of CLIP. Such assumption keeps us on safe side and we don't end up allocating more stids for IPv6 than actually supported. Based on original work by Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Powered by cgit, Gruvboxed by Blaster4385.