| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
fnic_clean_pending_aborts() was returning a non-zero value irrespective of
failure or success. This caused the caller of this function to assume that
the device reset had failed, even though it would succeed in most cases. As
a consequence, a successful device reset would escalate to host reset.
Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Tested-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://lore.kernel.org/r/20230727193919.2519-1-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Hyper-V provides the ability to connect Fibre Channel LUNs to the host
system and present them in a guest VM as a SCSI device. I/O to the vFC
device is handled by the storvsc driver. The storvsc driver includes a
partial integration with the FC transport implemented in the generic
portion of the Linux SCSI subsystem so that FC attributes can be displayed
in /sys. However, the partial integration means that some aspects of vFC
don't work properly. Unfortunately, a full and correct integration isn't
practical because of limitations in what Hyper-V provides to the guest.
In particular, in the context of Hyper-V storvsc, the FC transport timeout
function fc_eh_timed_out() causes a kernel panic because it can't find the
rport and dereferences a NULL pointer. The original patch that added the
call from storvsc_eh_timed_out() to fc_eh_timed_out() is faulty in this
regard.
In many cases a timeout is due to a transient condition, so the situation
can be improved by just continuing to wait like with other I/O requests
issued by storvsc, and avoiding the guaranteed panic. For a permanent
failure, continuing to wait may result in a hung thread instead of a panic,
which again may be better.
So fix the panic by removing the storvsc call to fc_eh_timed_out(). This
allows storvsc to keep waiting for a response. The change has been tested
by users who experienced a panic in fc_eh_timed_out() due to transient
timeouts, and it solves their problem.
In the future we may want to deprecate the vFC functionality in storvsc
since it can't be fully fixed. But it has current users for whom it is
working well enough, so it should probably stay for a while longer.
Fixes: 3930d7309807 ("scsi: storvsc: use default I/O timeout handler for FC devices")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1690606764-79669-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If pm8001_init_sas_add() fails, return error code in pm8001_pci_probe().
Fixes: 14a8f116cdc0 ("scsi: pm80xx: Add GET_NVMD timeout during probe")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230725125706.566990-1-yangyingliang@huawei.com
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Storage devices are free to send RSCNs, e.g. for internal state changes. If
this happens on all connected paths, zfcp risks temporarily losing all
paths at the same time. This has strong requirements on multipath
configuration such as "no_path_retry queue".
Avoid such situations by deferring fc_rport blocking until after the ADISC
response, when any actual state change of the remote port became clear.
The already existing port recovery triggers explicitly block the fc_rport.
The triggers are: on ADISC reject or timeout (typical cable pull case), and
on ADISC indicating that the remote port has changed its WWPN or
the port is meanwhile no longer open.
As a side effect, this also removes a confusing direct function call to
another work item function zfcp_scsi_rport_work() instead of scheduling
that other work item. It was probably done that way to have the rport block
side effect immediate and synchronous to the caller.
Fixes: a2fa0aede07c ("[SCSI] zfcp: Block FC transport rports early on errors")
Cc: stable@vger.kernel.org #v2.6.30+
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Link: https://lore.kernel.org/r/20230724145156.3920244-1-maier@linux.ibm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The Hyper-V host is queried to get the max transfer size that it supports,
and this value is used to set max_sectors for the synthetic SCSI
controller. However, this max transfer size may be too large for virtual
Fibre Channel devices, which are limited to 512 Kbytes. If a larger
transfer size is used with a vFC device, Hyper-V always returns an error,
and storvsc logs a message like this where the SRB status and SCSI status
are both zero:
hv_storvsc <GUID>: tag#197 cmd 0x8a status: scsi 0x0 srb 0x0 hv 0xc0000001
Add logic to limit the max transfer size to 512 Kbytes for vFC devices.
Fixes: 1d3e0980782f ("scsi: storvsc: Correct reporting of Hyper-V I/O size limits")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1689887102-32806-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit fcaa174a9c99 ("scsi/sg: don't grab scsi host module reference") make
a mess how blk_get_queue() is called, blk_get_queue() returns true on
success while the caller expects it returns 0 on success.
Fix this problem and also add a corresponding error message on failure.
Fixes: fcaa174a9c99 ("scsi/sg: don't grab scsi host module reference")
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Closes: https://lore.kernel.org/all/87lefv622n.fsf@linux.ibm.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230705024001.177585-1-yukuai1@huaweicloud.com
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In response to a disk I/O request, Hyper-V has been observed to return SRB
status value 0x30. This indicates the request was not processed by Hyper-V
because low memory conditions on the host caused an internal error. The
0x30 status is not recognized by storvsc, so the I/O operation is not
flagged as an error. The request is treated as if it completed normally but
with zero data transferred, causing a flood of retries.
Add a definition for this SRB status value and handle it like other error
statuses from the Hyper-V host.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1688788886-94279-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull in the currently staged SCSI fixes for 6.5.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull NTB updates from Jon Mason:
"Fixes for pci_clean_master, error handling in driver inits, and
various other issues/bugs"
* tag 'ntb-6.5' of https://github.com/jonmason/ntb:
ntb: hw: amd: Fix debugfs_create_dir error checking
ntb.rst: Fix copy and paste error
ntb_netdev: Fix module_init problem
ntb: intel: Remove redundant pci_clear_master
ntb: epf: Remove redundant pci_clear_master
ntb_hw_amd: Remove redundant pci_clear_master
ntb: idt: drop redundant pci_enable_pcie_error_reporting()
MAINTAINERS: git://github -> https://github.com for jonmason
NTB: EPF: fix possible memory leak in pci_vntb_probe()
NTB: ntb_tool: Add check for devm_kcalloc
NTB: ntb_transport: fix possible memory leak while device_register() fails
ntb: intel: Fix error handling in intel_ntb_pci_driver_init()
NTB: amd: Fix error handling in amd_ntb_pci_driver_init()
ntb: idt: Fix error handling in idt_pci_driver_init()
|
|
Pull more SCSI updates from James Bottomley:
"A few late arriving patches that missed the initial pull request. It's
mostly bug fixes (the dt-bindings is a fix for the initial pull)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Remove unused function declaration
scsi: target: docs: Remove tcm_mod_builder.py
scsi: target: iblock: Quiet bool conversion warning with pr_preempt use
scsi: dt-bindings: ufs: qcom: Fix ICE phandle
scsi: core: Simplify scsi_cdl_check_cmd()
scsi: isci: Fix comment typo
scsi: smartpqi: Replace one-element arrays with flexible-array members
scsi: target: tcmu: Replace strlcpy() with strscpy()
scsi: ncr53c8xx: Replace strlcpy() with strscpy()
scsi: lpfc: Fix lpfc_name struct packing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
- xiic patch should have been in the original pull but slipped through
- mpc patch fixes a build regression
- nomadik cleanup
* tag 'i2c-for-6.5-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mpc: Drop unused variable
i2c: nomadik: Remove a useless call in the remove function
i2c: xiic: Don't try to handle more interrupt events after error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- Check for NULL bdev in LoadPin (Matthias Kaehlcke)
- Revert unwanted KUnit FORTIFY build default
- Fix 1-element array causing boot warnings with xhci-hub
* tag 'hardening-v6.5-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
usb: ch9: Replace bmSublinkSpeedAttr 1-element array with flexible array
Revert "fortify: Allow KUnit test to build without FORTIFY"
dm: verity-loadpin: Add NULL pointer check for 'bdev' parameter
|
|
The debugfs_create_dir function returns ERR_PTR in case of error, and the
only correct way to check if an error occurred is 'IS_ERR' inline function.
This patch will replace the null-comparison with IS_ERR.
Signed-off-by: Anup Sharma <anupnewsmail@gmail.com>
Suggested-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
With both the ntb_transport_init and the ntb_netdev_init_module routines in the
module_init init group, the ntb_netdev_init_module routine can be called before
the ntb_transport_init routine that it depends on is called. To assure the
proper initialization order put ntb_netdev_init_module in the late_initcall
group.
Fixes runtime errors where the ntb_netdev_init_module call fails with ENODEV.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
As ntb_register_device() don't handle error of device_register(),
if ntb_register_device() returns error in pci_vntb_probe(), name of kobject
which is allocated in dev_set_name() called in device_add() is leaked.
As comment of device_add() says, it should call put_device() to drop the
reference count that was set in device_initialize()
when it fails, so the name can be freed in kobject_cleanup().
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
As the devm_kcalloc may return NULL pointer,
it should be better to add check for the return
value, as same as the others.
Fixes: 7f46c8b3a552 ("NTB: ntb_tool: Add full multi-port NTB API support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
If device_register() returns error, the name allocated by
dev_set_name() need be freed. As comment of device_register()
says, it should use put_device() to give up the reference in
the error path. So fix this by calling put_device(), then the
name can be freed in kobject_cleanup(), and client_dev is freed
in ntb_transport_client_release().
Fixes: fce8a7bb5b4b ("PCI-Express Non-Transparent Bridge Support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
A problem about ntb_hw_intel create debugfs failed is triggered with the
following log given:
[ 273.112733] Intel(R) PCI-E Non-Transparent Bridge Driver 2.0
[ 273.115342] debugfs: Directory 'ntb_hw_intel' with parent '/' already present!
The reason is that intel_ntb_pci_driver_init() returns
pci_register_driver() directly without checking its return value, if
pci_register_driver() failed, it returns without destroy the newly created
debugfs, resulting the debugfs of ntb_hw_intel can never be created later.
intel_ntb_pci_driver_init()
debugfs_create_dir() # create debugfs directory
pci_register_driver()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without destroy debugfs directory
Fix by removing debugfs when pci_register_driver() returns error.
Fixes: e26a5843f7f5 ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
A problem about ntb_hw_amd create debugfs failed is triggered with the
following log given:
[ 618.431232] AMD(R) PCI-E Non-Transparent Bridge Driver 1.0
[ 618.433284] debugfs: Directory 'ntb_hw_amd' with parent '/' already present!
The reason is that amd_ntb_pci_driver_init() returns pci_register_driver()
directly without checking its return value, if pci_register_driver()
failed, it returns without destroy the newly created debugfs, resulting
the debugfs of ntb_hw_amd can never be created later.
amd_ntb_pci_driver_init()
debugfs_create_dir() # create debugfs directory
pci_register_driver()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without destroy debugfs directory
Fix by removing debugfs when pci_register_driver() returns error.
Fixes: a1b3695820aa ("NTB: Add support for AMD PCI-Express Non-Transparent Bridge")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
A problem about ntb_hw_idt create debugfs failed is triggered with the
following log given:
[ 1236.637636] IDT PCI-E Non-Transparent Bridge Driver 2.0
[ 1236.639292] debugfs: Directory 'ntb_hw_idt' with parent '/' already present!
The reason is that idt_pci_driver_init() returns pci_register_driver()
directly without checking its return value, if pci_register_driver()
failed, it returns without destroy the newly created debugfs, resulting
the debugfs of ntb_hw_idt can never be created later.
idt_pci_driver_init()
debugfs_create_dir() # create debugfs directory
pci_register_driver()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without destroy debugfs directory
Fix by removing debugfs when pci_register_driver() returns error.
Fixes: bf2a952d31d2 ("NTB: Add IDT 89HPESxNTx PCIe-switches support")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
Pull mmc fix from Ulf Hansson:
- Fix regression of detection of eMMC/SD/SDIO cards
* tag 'mmc-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: Revert "mmc: core: Allow mmc_start_host() synchronously detect a card"
|
|
Pull drm fixes from Dave Airlie:
"Lots of fixes, mostly i915 and amdgpu. It's two weeks of i915, and I
think three weeks of amdgpu.
fbdev:
- Fix module infos on sparc
panel:
- Fix mode on Starry-ili9882t
i915:
- Allow DC states along with PW2 only for PWB functionality [adlp+]
- Fix SSC selection for MPLLA [mtl]
- Use hw.adjusted mode when calculating io/fast wake times [psr]
- Apply min softlimit correctly [guc/slpc]
- Assign correct hdcp content type [hdcp]
- Add missing forward declarations/includes to display power headers
- Fix BDW PSR AUX CH data register offsets [psr]
- Use mock device info for creating mock device
amdgpu:
- Misc cleanups
- GFX 9.4.3 fixes
- DEBUGFS build fix
- Fix LPDDR5 reporting
- ASPM fixes
- DCN 3.1.4 fixes
- DP MST fixes
- DCN 3.2.x fixes
- Display PSR TCON fixes
- SMU 13.x fixes
- RAS fixes
- Vega12/20 SMU fixes
- PSP flashing cleanup
- GFX9 MCBP fixes
- SR-IOV fixes
- GPUVM clear mappings fix for always valid BOs
- Add FAMS quirk for problematic monitor
- Fix possible UAF
- Better handle monentary temperature fluctuations
- SDMA 4.4.2 fixes
- Fencing fix"
* tag 'drm-next-2023-07-07' of git://anongit.freedesktop.org/drm/drm: (83 commits)
drm/i915: use mock device info for creating mock device
drm/i915/psr: Fix BDW PSR AUX CH data register offsets
drm/amdgpu: Fix potential fence use-after-free v2
drm/amd/pm: avoid unintentional shutdown due to temperature momentary fluctuation
drm/amd/pm: expose swctf threshold setting for legacy powerplay
drm/amd/display: 3.2.241
drm/amd/display: Take full update path if number of planes changed
drm/amd/display: Create debugging mechanism for Gaming FAMS
drm/amd/display: Add monitor specific edid quirk
drm/amd/display: For new fast update path, loop through each surface
drm/amd/display: Remove Phantom Pipe Check When Calculating K1 and K2
drm/amd/display: Limit new fast update path to addr and gamma / color
drm/amd/display: Fix the delta clamping for shaper LUT
drm/amdgpu: Keep non-psp path for partition switch
drm/amd/display: program DPP shaper and 3D LUT if updated
Revert "drm/amd/display: edp do not add non-edid timings"
drm/amdgpu: share drm device for pci amdgpu device with 1st partition device
drm/amd/pm: Add GFX v9.4.3 unique id to sysfs
drm/amd/pm: Enable pp_feature attribute
drm/amdgpu/vcn: Need to unpause dpg before stop dpg
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These fix a couple of compiler warnings, refine an ACPI device
enumeration quirk to address a driver regression and clean up code.
Specifics:
- Make acpi_companion_match() return a const pointer and update its
callers accordingly (Andy Shevchenko)
- Move the extern declaration of the acpi_root variable to a header
file so as to address a compiler warning (Andy Shevchenko)
- Address compiler warnings in the ACPI device enumeration code by
adding a missing header file include to it (Ben Dooks)
- Refine the SMB0001 quirk in the ACPI device enumeration code so as
to address an i2c-scmi driver regression (Andy Shevchenko)
- Clean up two pieces of the ACPI device enumeration code (Andy
Shevchenko)"
* tag 'acpi-6.5-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: scan: Use the acpi_match_acpi_device() helper
ACPI: platform: Move SMB0001 HID to the header and reuse
ACPI: platform: Ignore SMB0001 only when it has resources
ACPI: bus: Introduce acpi_match_acpi_device() helper
ACPI: scan: fix undeclared variable warnings by including sleep.h
ACPI: bus: Constify acpi_companion_match() returned value
ACPI: scan: Move acpi_root to internal header
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few mostly minor fixes that came in during the merge window, plus
one administrative update for Jonas' e-mail address.
The spi-geni-qcom fix is more major than the others, fixing the newly
added DMA support for large reads which trigger DMA"
* tag 'spi-fix-v6.5-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: bcm{63xx,bca}-hsspi: update my email address
spi: rzv2m-csi: Fix SoC product name
spi: bcm-qspi: return error if neither hif_mspi nor mspi is available
spi: spi-geni-qcom: enable SPI_CONTROLLER_MUST_TX for GPI DMA mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"A simple dependency fix for a newly added driver"
* tag 'regulator-fix-v6.5-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: raa215300: Add build dependency with COMMON_CLK
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
Short summary of fixes pull:
* panel: Fix mode on Starry-ili9882t
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230706112203.GA30555@linux-uq9g
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Fix BDW PSR AUX CH data register offsets [psr] (Ville Syrjälä)
- Use mock device info for creating mock device (Jani Nikula)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZKZ6VIeInBYrBuph@tursulin-desk
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-fixes-6.5-2023-06-30-1:
amdgpu:
- Misc cleanups
- GFX 9.4.3 fixes
- DEBUGFS build fix
- Fix LPDDR5 reporting
- ASPM fixes
- DCN 3.1.4 fixes
- DP MST fixes
- DCN 3.2.x fixes
- Display PSR TCON fixes
- SMU 13.x fixes
- RAS fixes
- Vega12/20 SMU fixes
- PSP flashing cleanup
- GFX9 MCBP fixes
- SR-IOV fixes
- GPUVM clear mappings fix for always valid BOs
- Add FAMS quirk for problematic monitor
- Fix possible UAF
- Better handle monentary temperature fluctuations
- SDMA 4.4.2 fixes
- Fencing fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230630175757.8128-1-alexander.deucher@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- Fix virtual vs physical address confusion in vmem_add_range() and
vmem_remove_range() functions
- Include <linux/io.h> instead of <asm/io.h> and <asm-generic/io.h>
throughout s390 code
- Make all PSW related defines also available for assembler files.
Remove PSW_DEFAULT_KEY define from uapi for that
- When adding an undefined symbol the build still succeeds, but
userspace crashes trying to execute VDSO, because the symbol is not
resolved. Add undefined symbols check to prevent that
- Use kvmalloc_array() instead of kzalloc() for allocaton of 256k
memory when executing s390 crypto adapter IOCTL
- Add -fPIE flag to prevent decompressor misaligned symbol build error
with clang
- Use .balign instead of .align everywhere. This is a no-op for s390,
but with this there no mix in using .align and .balign anymore
- Filter out -mno-pic-data-is-text-relative flag when compiling kernel
to prevent VDSO build error
- Rework entering of DAT-on mode on CPU restart to use PSW_KERNEL_BITS
mask directly
- Do not retry administrative requests to some s390 crypto cards, since
the firmware assumes replay attacks
- Remove most of the debug code, which is build in when kernel config
option CONFIG_ZCRYPT_DEBUG is enabled
- Remove CONFIG_ZCRYPT_MULTIDEVNODES kernel config option and switch
off the multiple devices support for the s390 zcrypt device driver
- With the conversion to generic entry machine checks are accounted to
the current context instead of irq time. As result, the STCKF
instruction at the beginning of the machine check handler and the
lowcore member are no longer required, therefore remove it
- Fix various typos found with codespell
- Minor cleanups to CPU-measurement Counter and Sampling Facilities
code
- Revert patch that removes VMEM_MAX_PHYS macro, since it causes a
regression
* tag 's390-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (25 commits)
Revert "s390/mm: get rid of VMEM_MAX_PHYS macro"
s390/cpum_sf: remove check on CPU being online
s390/cpum_sf: handle casts consistently
s390/cpum_sf: remove unnecessary debug statement
s390/cpum_sf: remove parameter in call to pr_err
s390/cpum_sf: simplify function setup_pmu_cpu
s390/cpum_cf: remove unneeded debug statements
s390/entry: remove mcck clock
s390: fix various typos
s390/zcrypt: remove ZCRYPT_MULTIDEVNODES kernel config option
s390/zcrypt: do not retry administrative requests
s390/zcrypt: cleanup some debug code
s390/entry: rework entering DAT-on mode on CPU restart
s390/mm: fence off VM macros from asm and linker
s390: include linux/io.h instead of asm/io.h
s390/ptrace: make all psw related defines also available for asm
s390/ptrace: remove PSW_DEFAULT_KEY from uapi
s390/vdso: filter out mno-pic-data-is-text-relative cflag
s390: consistently use .balign instead of .align
s390/decompressor: fix misaligned symbol build error
...
|
|
Fix the following build error.
Error log:
drivers/i2c/busses/i2c-mpc.c: In function 'mpc_i2c_setup_512x':
drivers/i2c/busses/i2c-mpc.c:310:20: error: unused variable 'pval'
Fixes: 9d178e00583e ("i2c: mpc: Use of_property_read_reg() to parse "reg"")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Since commit 235602146ec9 ("i2c-nomadik: turn the platform driver to an amba
driver"), there is no more request_mem_region() call in this driver.
So remove the release_mem_region() call from the remove function which is
likely a left over.
Fixes: 235602146ec9 ("i2c-nomadik: turn the platform driver to an amba driver")
Cc: <stable@vger.kernel.org> # v3.6+
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
In xiic_process, it is possible that error events such as arbitration
lost or TX error can be raised in conjunction with other interrupt flags
such as TX FIFO empty or bus not busy. Error events result in the
controller being reset and the error returned to the calling request,
but the function could potentially try to keep handling the other
events, such as by writing more messages into the TX FIFO. Since the
transaction has already failed, this is not helpful and will just cause
issues.
This problem has been present ever since:
commit 7f9906bd7f72 ("i2c: xiic: Service all interrupts in isr")
which allowed non-error events to be handled after errors, but became
more obvious after:
commit 743e227a8959 ("i2c: xiic: Defer xiic_wakeup() and
__xiic_start_xfer() in xiic_process()")
which reworked the code to add a WARN_ON which triggers if both the
xfer_more and wakeup_req flags were set, since this combination is
not supposed to happen, but was occurring in this scenario.
Skip further interrupt handling after error flags are detected to avoid
this problem.
Fixes: 7f9906bd7f72 ("i2c: xiic: Service all interrupts in isr")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Merge additional ACPI device enumeration code changes for 6.5-rc1.
- Make acpi_companion_match() return a const pointer and update its
callers accordingly (Andy Shevchenko).
- Move the extern declaration of the acpi_root variable to a header
file so as to address a compiler warning (Andy Shevchenko).
- Address compiler warnings in the ACPI device enumeration code by
adding a missing header file include to it (Ben Dooks).
- Refine the SMB0001 quirk in the ACPI device enumeration code so as to
address an i2c-scmi driver regression (Andy Shevchenko).
- Clean up two pieces of the ACPI device enumeration code (Andy
Shevchenko).
* acpi-bus:
ACPI: bus: Constify acpi_companion_match() returned value
* acpi-scan:
ACPI: scan: Use the acpi_match_acpi_device() helper
ACPI: platform: Move SMB0001 HID to the header and reuse
ACPI: platform: Ignore SMB0001 only when it has resources
ACPI: bus: Introduce acpi_match_acpi_device() helper
ACPI: scan: fix undeclared variable warnings by including sleep.h
ACPI: scan: Move acpi_root to internal header
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"These are cleanups for architecture specific header files:
- the comments in include/linux/syscalls.h have gone out of sync and
are really pointless, so these get removed
- The asm/bitsperlong.h header no longer needs to be architecture
specific on modern compilers, so use a generic version for newer
architectures that use new enough userspace compilers
- A cleanup for virt_to_pfn/virt_to_bus to have proper type checking,
forcing the use of pointers"
* tag 'asm-generic-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
syscalls: Remove file path comments from headers
tools arch: Remove uapi bitsperlong.h of hexagon and microblaze
asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarch
m68k/mm: Make pfn accessors static inlines
arm64: memory: Make virt_to_pfn() a static inline
ARM: mm: Make virt_to_pfn() a static inline
asm-generic/page.h: Make pfn accessors static inlines
xen/netback: Pass (void *) to virt_to_page()
netfs: Pass a pointer to virt_to_page()
cifs: Pass a pointer to virt_to_page() in cifsglob
cifs: Pass a pointer to virt_to_page()
riscv: mm: init: Pass a pointer to virt_to_page()
ARC: init: Pass a pointer to virt_to_pfn() in init
m68k: Pass a pointer to virt_to_pfn() virt_to_page()
fs/proc/kcore.c: Pass a pointer to virt_addr_valid()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"There are three small fixes that came up sincie the past week:
- an incorrect bit offset in ixp4xx bus driver
- a riscv randconfig regression in the thead platform I merged
- whitespace fixes for some dts files"
* tag 'soc-fixes-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
bus: ixp4xx: fix IXP4XX_EXP_T1_MASK
ARM: dts: st: add missing space before {
RISC-V: make ARCH_THEAD preclude XIP_KERNEL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New support:
- TI J721S2 CSI BCDMA support
Updates:
- Native HDMI support for dw edma driver
- ste dma40 updates for supporting proper SRAM handle in DT
- removal of dma device chancnt setting in drivers"
* tag 'dmaengine-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (28 commits)
dmaengine: sprd: Don't set chancnt
dmaengine: hidma: Don't set chancnt
dmaengine: plx_dma: Don't set chancnt
dmaengine: axi-dmac: Don't set chancnt
dmaengine: dw-axi-dmac: Don't set chancnt
dmaengine: qcom: bam_dma: allow omitting num-{channels,ees}
dmaengine: dw-edma: Add HDMA DebugFS support
dmaengine: dw-edma: Add support for native HDMA
dmaengine: dw-edma: Create a new dw_edma_core_ops structure to abstract controller operation
dmaengine: dw-edma: Rename dw_edma_core_ops structure to dw_edma_plat_ops
dmaengine: ste_dma40: use proper format string for resource_size_t
dmaengine: make QCOM_HIDMA depend on HAS_IOMEM
dmaengine: ste_dma40: fix typo in enum documentation
dmaengine: ste_dma40: use correct print specfier for resource_size_t
MAINTAINERS: Add myself as the DW eDMA driver reviewer
MAINTAINERS: Add Manivannan to DW eDMA driver maintainers list
MAINTAINERS: Demote Gustavo Pimentel to DW EDMA driver reviewer
dmaengine: ti: k3-udma: Add support for J721S2 CSI BCDMA instance
dt-bindings: dma: ti: Add J721S2 BCDMA
dmaengine: ti: k3-psil-j721s2: Add PSI-L thread map for main CPSW2G
...
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- add Xilinx Versal watchdog
- support Hygon FCH/SCH (Server Controller Hub)
- convert GPL notices to SPDX identifiers
- other improvements
* tag 'linux-watchdog-6.5-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: sp5100_tco: support Hygon FCH/SCH (Server Controller Hub)
dt-bindings: watchdog: restrict node name suffixes
MAINTAINERS: Add support for Xilinx versal watchdog
watchdog: xilinx_wwdt: Add Versal window watchdog support
dt-bindings: watchdog: xlnx,versal-wwdt: Add versal watchdog
watchdog: ziirave_wdt: Switch i2c driver back to use .probe()
watchdog: ibmasr: Replace GPL license notice with SPDX identifier
watchdog: Convert GPL 2.0 notice to SPDX identifier
watchdog: loongson1_wdt: Add DT support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New Support:
- Debugfs support for phy core and mediatek driver
- Hisilicon inno-usb2-phy driver supporting Hi3798MV100
- Qualcomm SGMII SerDes PHY driver, SM6115 & QCM2290 QMP-USB support,
SA8775P USB PHY & USB3 UNI support, QUSB2 support for IPQ9574,
IPQ9574 USB3 PHY
UpdatesL
- Sparx5 serdes phy power optimzation
- cadence salvo usb properties and updates and torrent DP with PCIe &
USB support
- Yaml conversion for Broadcom kona USB bindings and MXS USB binding"
* tag 'phy-for-6.5_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (67 commits)
dt-bindings: phy: brcm,brcmstb-usb-phy: Fix error in "compatible" conditional schema
dt-bindings: phy: mixel,mipi-dsi-phy: Remove assigned-clock* properties
dt-bindings: phy: intel,combo-phy: restrict node name suffixes
dt-bindings: phy: qcom,usb-hs-phy: Add compatible
phy: tegra: xusb: check return value of devm_kzalloc()
phy: qcom: qmp-combo: fix Display Port PHY configuration for SM8550
phy: qcom: add the SGMII SerDes PHY driver
dt-bindings: phy: describe the Qualcomm SGMII PHY
phy: qualcomm: fix indentation in Makefile
phy: usb: suppress OC condition for 7439b2
phy: usb: Turn off phy when port is in suspend
phy: tegra: xusb: Clear the driver reference in usb-phy dev
dt-bindings: phy: mxs-usb-phy: add imx8ulp and imx8qm compatible
dt-bindings: phy: mxs-usb-phy: convert to DT schema format
dt-bindings: phy: qcom,qmp-usb: fix bindings error
dt-bindings: phy: qcom,qmp-ufs: fix the sc8180x regs
dt-bindings: phy: qcom,qmp-pcie: fix the sc8180x regs
phy: mediatek: tphy: add debugfs files
phy: core: add debugfs files
phy: fsl-imx8mp-usb: add support for phy tuning
...
|
|
Damien Le Moal <dlemoal@kernel.org> says:
blk_revalidate_disk_zones() implements checks of the zones of a zoned
block device, verifying that the zone size is a power of 2 number of
sectors, that all zones (except possibly the last one) have the same
size and that zones cover the entire addressing space of the device.
While these checks are appropriate to verify that well tested hardware
devices have an adequate zone configurations, they lack in certain areas
which may result in issues with potentially buggy emulated devices
implemented with user drivers such as ublk or tcmu. Specifically, this
function does not check if the device driver indicated support for the
mandatory zone append writes, that is, if the device
max_zone_append_sectors queue limit is set to a non-zero value.
Additionally, invalid zones such as a zero length zone with a start
sector equal to the device capacity will not be detected and result in
out of bounds use of the zone bitmaps prepared with the callback
function blk_revalidate_zone_cb().
This series address these issues by modifying the 4 block device drivers
that currently support zoned block devices to ensure that they all set a
zoned device zone size and max zone append sectors limit before
executing blk_revalidate_disk_zones(). With these changes in place,
patch 5 improves blk_revalidate_disk_zones() to address the missing
checks, relying on the fact that the zone size and zone append limit are
normally set when this function is called.
Link: https://lore.kernel.org/r/20230703024812.76778-1-dlemoal@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In virtblk_probe_zoned_device(), execute blk_queue_chunk_sectors() and
blk_queue_max_zone_append_sectors() to respectively set the zoned device
zone size and maximum zone append sector limit before executing
blk_revalidate_disk_zones(). This is to allow the block layer zone
reavlidation to check these device characteristics prior to checking all
zones of the device.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230703024812.76778-5-dlemoal@kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In null_register_zoned_dev(), execute blk_queue_chunk_sectors() and
blk_queue_max_zone_append_sectors() to respectively set the zoned device
zone size and maximum zone append sector limit before executing
blk_revalidate_disk_zones(). This is to allow the block layer zone
reavlidation to check these device characteristics prior to checking all
zones of the device.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230703024812.76778-4-dlemoal@kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In nvme_revalidate_zones(), execute blk_queue_chunk_sectors() and
blk_queue_max_zone_append_sectors() to respectively set a ZNS namespace
zone size and maximum zone append sector limit before executing
blk_revalidate_disk_zones(). This is to allow the block layer zone
reavlidation to check these device characteristics prior to checking all
zones of the device.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230703024812.76778-3-dlemoal@kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In sd_zbc_revalidate_zones(), execute blk_queue_chunk_sectors() and
blk_queue_max_zone_append_sectors() to respectively set a ZBC device
zone size and maximum zone append sector limit before executing
blk_revalidate_disk_zones(). This is to allow the block layer zone
reavlidation to check these device characteristics prior to checking all
zones of the device.
Since blk_queue_max_zone_append_sectors() already caps the device
maximum zone append limit to the zone size and to the maximum command
size, the max_append value passed to blk_queue_max_zone_append_sectors()
is simplified to the maximum number of segments times the number of
sectors per page.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230703024812.76778-2-dlemoal@kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The new qTimestamp attribute was added to UFS 4.0 spec, in order to
synchronize timestamp between device logs and the host. The spec recommends
to send this attribute upon device power-on Reset/HW reset or when
switching to Active state (using SSU command). Due to this attribute, the
attribute's max value was extended to 8 bytes. As a result, the new
definition of struct utp_upiu_query_v4_0 was added.
Signed-off-by: Arthur Simchaev <Arthur.Simchaev@wdc.com>
-----------------
Changes to v2:
- Adressed Bart's comments
- Add missed response variable to ufshcd_set_timestamp_attr
Link: https://lore.kernel.org/r/20230626103320.8737-1-arthur.simchaev@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The one-element array in aac_aifcmd is actually meant as a flexible array,
and causes an overflow warning that can be avoided using the normal flex
arrays:
drivers/scsi/aacraid/commsup.c:1166:17: error: array index 1 is past the end of the array (that has type 'u8[1]' (aka 'unsigned char[1]'), cast to '__le32 *' (aka 'unsigned int *')) [-Werror,-Warray-bounds]
(((__le32 *)aifcmd->data)[1] == cpu_to_le32(3));
^ ~
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230703114851.1194510-1-arnd@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When RESET_CONTROLLER is not set, kconfig complains about missing
dependencies for RESET_TI_SYSCON, so add the missing dependency just as is
done above for SCSI_UFS_QCOM.
Silences this kconfig warning:
WARNING: unmet direct dependencies detected for RESET_TI_SYSCON
Depends on [n]: RESET_CONTROLLER [=n] && HAS_IOMEM [=y]
Selected by [m]:
- SCSI_UFS_MEDIATEK [=m] && SCSI_UFSHCD [=y] && SCSI_UFSHCD_PLATFORM [=y] && ARCH_MEDIATEK [=y]
Fixes: de48898d0cb6 ("scsi: ufs-mediatek: Create reset control device_link")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: lore.kernel.org/r/202306020859.1wHg9AaT-lkp@intel.com
Link: https://lore.kernel.org/r/20230701052348.28046-1-rdunlap@infradead.org
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Peter Wang <peter.wang@mediatek.com>
Cc: Paul Gazzillo <paul@pgazz.com>
Cc: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Cc: linux-scsi@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|