| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The recently merged LoongArch drivers paper over the lack of
topology information by creating a bunch of fwnodes for the
irqchips. So far, so good.
However, irq_domain_alloc_fwnode() is supposed to take a PA, and
not a kernel VA blindly cast as a PA, potentially disclosing
kernel VAs to userspace. In some other cases, even NULL is used
as the PA, which is entertaining.
Fix this by using the actual PA of the block when available,
and switch to a named fwnode in the other cases.
Signed-off-by: Marc Zyngier <[email protected]>
Reviewed-by: Jianmin Lv <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Since
commit e6e771b3d897 ("s390/qeth: detach netdevice while card is offline")
there was a timing window during recovery, that qeth_query_card_info could
be sent to the card, even before it was ready for it, leading to a failing
card recovery. There is evidence that this window was hit, as not all
callers of get_link_ksettings() check for netif_device_present.
Use cached values in qeth_get_link_ksettings(), instead of calling
qeth_query_card_info() and falling back to default values in case it
fails. Link info is already updated when the card goes online, e.g. after
STARTLAN (physical link up). Set the link info to default values, when the
card goes offline or at STOPLAN (physical link down). A follow-on patch
will improve values reported for link down.
Fixes: e6e771b3d897 ("s390/qeth: detach netdevice while card is offline")
Signed-off-by: Alexandra Winter <[email protected]>
Reviewed-by: Thorsten Winkler <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
If CONFIG_NVMEM is not set of_nvmem_cell_get, of_nvmem_device_get
functions will return ERR_PTR(-EOPNOTSUPP) and "failed to get nvmem
cell io_impedance_ctrl" error would be reported despite "io_impedance_ctrl"
is completely missing in Device Tree and we should use default values.
Check -EOPNOTSUPP togather with -ENOENT to avoid this situation.
Fixes: 5c2d0a6a0701 ("net: phy: dp83867: implement support for io_impedance_ctrl nvmem cell")
Signed-off-by: Nikita Shubin <[email protected]>
Acked-by: Rasmus Villemoes <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
specified
In case master/slave clock role is not specified (which is default), the
aneg registers will not be written.
The visible impact of this is missing pause advertisement.
So, rework genphy_c45_baset1_an_config_aneg() to be able to write
advertisement registers even if clock role is unknown.
Fixes: 3da8ffd8545f ("net: phy: Add 10BASE-T1L support in phy-c45")
Signed-off-by: Oleksij Rempel <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
There are use-after-free bugs caused by tst_timer. The root cause
is that there are no functions to stop tst_timer in idt77252_exit().
One of the possible race conditions is shown below:
(thread 1) | (thread 2)
| idt77252_init_one
| init_card
| fill_tst
| mod_timer(&card->tst_timer, ...)
idt77252_exit | (wait a time)
| tst_timer
|
| ...
kfree(card) // FREE |
| card->soft_tst[e] // USE
The idt77252_dev is deallocated in idt77252_exit() and used in
timer handler.
This patch adds del_timer_sync() in idt77252_exit() in order that
the timer handler could be stopped before the idt77252_dev is
deallocated.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Duoming Zhou <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
closed
min_gate_len[tc] is supposed to track the shortest interval of
continuously open gates for a traffic class. For example, in the
following case:
TC 76543210
t0 00000001b 200000 ns
t1 00000010b 200000 ns
min_gate_len[0] and min_gate_len[1] should be 200000, while
min_gate_len[2-7] should be 0.
However what happens is that min_gate_len[0] is 200000, but
min_gate_len[1] ends up being 0 (despite gate_len[1] being 200000 at the
point where the logic detects the gate close event for TC 1).
The problem is that the code considers a "gate close" event whenever it
sees that there is a 0 for that TC (essentially it's level rather than
edge triggered). By doing that, any time a gate is seen as closed
without having been open prior, gate_len, which is 0, will be written
into min_gate_len. Once min_gate_len becomes 0, it's impossible for it
to track anything higher than that (the length of actually open
intervals).
To fix this, we make the writing to min_gate_len[tc] be edge-triggered,
which avoids writes for gates that are closed in consecutive intervals.
However what this does is it makes us need to special-case the
permanently closed gates at the end.
Fixes: 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port")
Signed-off-by: Vladimir Oltean <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
If tsnep_tx_map() fails, then tsnep_tx_unmap() shall start at the write
index like tsnep_tx_map(). This is different to the normal operation.
Thus, add an additional parameter to tsnep_tx_unmap() to enable start at
different positions for successful TX and failed TX.
Fixes: 403f69bbdbad ("tsnep: Add TSN endpoint Ethernet MAC driver")
Signed-off-by: Gerhard Engleder <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Kernel test robot found the following warning:
drivers/net/ethernet/engleder/tsnep_main.c:1254:34: warning:
'tsnep_of_match' defined but not used [-Wunused-const-variable=]
of_match_ptr() compiles into NULL if CONFIG_OF is disabled.
tsnep_of_match exists always so use of of_match_ptr() is useless.
Fix warning by dropping of_match_ptr().
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Gerhard Engleder <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more iov_iter updates from Al Viro:
- more new_sync_{read,write}() speedups - ITER_UBUF introduction
- ITER_PIPE cleanups
- unification of iov_iter_get_pages/iov_iter_get_pages_alloc and
switching them to advancing semantics
- making ITER_PIPE take high-order pages without splitting them
- handling copy_page_from_iter() for high-order pages properly
* tag 'pull-work.iov_iter-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (32 commits)
fix copy_page_from_iter() for compound destinations
hugetlbfs: copy_page_to_iter() can deal with compound pages
copy_page_to_iter(): don't split high-order page in case of ITER_PIPE
expand those iov_iter_advance()...
pipe_get_pages(): switch to append_pipe()
get rid of non-advancing variants
ceph: switch the last caller of iov_iter_get_pages_alloc()
9p: convert to advancing variant of iov_iter_get_pages_alloc()
af_alg_make_sg(): switch to advancing variant of iov_iter_get_pages()
iter_to_pipe(): switch to advancing variant of iov_iter_get_pages()
block: convert to advancing variants of iov_iter_get_pages{,_alloc}()
iov_iter: advancing variants of iov_iter_get_pages{,_alloc}()
iov_iter: saner helper for page array allocation
fold __pipe_get_pages() into pipe_get_pages()
ITER_XARRAY: don't open-code DIV_ROUND_UP()
unify the rest of iov_iter_get_pages()/iov_iter_get_pages_alloc() guts
unify xarray_get_pages() and xarray_get_pages_alloc()
unify pipe_get_pages() and pipe_get_pages_alloc()
iov_iter_get_pages(): sanity-check arguments
iov_iter_get_pages_alloc(): lift freeing pages array on failure exits into wrapper
...
|
|
Most of the users immediately follow successful iov_iter_get_pages()
with advancing by the amount it had returned.
Provide inline wrappers doing that, convert trivial open-coded
uses of those.
BTW, iov_iter_get_pages() never returns more than it had been asked
to; such checks in cifs ought to be removed someday...
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Al Viro <[email protected]>
|
|
In the commit f395e1d3b28d7c2c67b73bd467c4fb79523e1c65
("rtc: spear: set range"), the value of
RTC_TIMESTAMP_END_9999 was incorrectly set to range_min.
390 config->rtc->range_min = RTC_TIMESTAMP_BEGIN_0000;
391 config->rtc->range_max = RTC_TIMESTAMP_END_9999;
Fixes: f395e1d3b28d ("rtc: spear: set range")
Signed-off-by: Zeng Jingxiang <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"This introduces support for the remoteproc on Mediatek MT8188, and
enables caches for MT8186 SCP. It adds support for PRU cores found on
the TI K3 AM62x SoCs.
It moves the recovery work after a firmware crash to an unbound
workqueue, to allow recovery to happen in parallel.
A new DMA API is introduced to release dma_mem for a device.
It adds support a panic handler for the Qualcomm modem remoteproc,
with the goal of having caches flushed in memory dumps for post-mortem
debugging and it introduces a mechanism to wait for the modem firmware
on SM8450 to decrypt part of its memory for post-mortem debugging.
Qualcomm sysmon is restricted to only inform remote processors about
peers that are actually running, to avoid a race where Linux tries to
notify a recovering remote processor about its peers new state. A
mechanism for waiting for the sysmon connection to be established is
also introduced, to avoid out-of-sync updates for rapidly restarting
remote processors.
A number of Devicetree binding cleanups and conversions to YAML are
introduced, to facilitate Devicetree validation. Lastly it introduces
a number of smaller fixes and cleanups in the core and a few different
drivers"
* tag 'rproc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (42 commits)
remoteproc: qcom_q6v5_pas: Do not fail if regulators are not found
drivers/remoteproc: fix repeated words in comments
remoteproc: Directly use ida_alloc()/free()
remoteproc: Use unbounded workqueue for recovery work
remoteproc: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
remoteproc: qcom_q6v5_pas: Deal silently with optional px and cx regulators
remoteproc: sysmon: Send sysmon state only for running rprocs
remoteproc: sysmon: Wait for SSCTL service to come up
remoteproc: qcom: q6v5: Set q6 state to offline on receiving wdog irq
remoteproc: qcom: pas: Check if coredump is enabled
remoteproc: qcom: pas: Mark devices as wakeup capable
remoteproc: qcom: pas: Mark va as io memory
remoteproc: qcom: pas: Add decrypt shutdown support for modem
remoteproc: qcom: q6v5-mss: add powerdomains to MSM8996 config
remoteproc: qcom_q6v5: Introduce panic handler for MSS
remoteproc: qcom_q6v5_mss: Update MBA log info
remoteproc: qcom: correct kerneldoc
remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use
remoteproc: qcom: using pm_runtime_resume_and_get to simplify the code
remoteproc: mediatek: Support MT8188 SCP
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
"This contains fixes and cleanups in the rpmsg core, Qualcomm SMD and
GLINK drivers, a circular lock dependency in the Mediatek driver and
a possible race condition in the rpmsg_char driver is resolved"
* tag 'rpmsg-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: convert sysfs snprintf to sysfs_emit
rpmsg: qcom_smd: Fix refcount leak in qcom_smd_parse_edge
rpmsg: qcom: correct kerneldoc
rpmsg: qcom: glink: remove unused name
rpmsg: qcom: glink: replace strncpy() with strscpy_pad()
rpmsg: Strcpy is not safe, use strscpy_pad() instead
rpmsg: Fix possible refcount leak in rpmsg_register_device_override()
rpmsg: Fix parameter naming for announce_create/destroy ops
rpmsg: mtk_rpmsg: Fix circular locking dependency
rpmsg: char: Add mutex protection for rpmsg_eptdev_open()
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- add RTL9310 support
- sp805_wdt: add arm cmsdk apb wdt support
- Remove #ifdef guards for PM related functions for several watchdog
device drivers
- pm8916_wdt reboot improvements
- Several other fixes and improvements
* tag 'linux-watchdog-5.20-rc1' of git://www.linux-watchdog.org/linux-watchdog: (24 commits)
watchdog: armada_37xx_wdt: check the return value of devm_ioremap() in armada_37xx_wdt_probe()
watchdog: dw_wdt: Fix comment typo
watchdog: Fix comment typo
dt-bindings: watchdog: Add fsl,scu-wdt yaml file
watchdog:Fix typo in comment
watchdog: pm8916_wdt: Handle watchdog enabled by bootloader
watchdog: pm8916_wdt: Report reboot reason
watchdog: pm8916_wdt: Avoid read of write-only PET register
watchdog: wdat_wdt: Remove #ifdef guards for PM related functions
watchdog: tegra_wdt: Remove #ifdef guards for PM related functions
watchdog: st_lpc_wdt: Remove #ifdef guards for PM related functions
watchdog: sama5d4_wdt: Remove #ifdef guards for PM related functions
watchdog: s3c2410_wdt: Remove #ifdef guards for PM related functions
watchdog: mtk_wdt: Remove #ifdef guards for PM related functions
watchdog: dw_wdt: Remove #ifdef guards for PM related functions
watchdog: bcm7038_wdt: Remove #ifdef guards for PM related functions
watchdog: realtek-otto: add RTL9310 support
dt-bindings: watchdog: realtek,otto-wdt: add RTL9310
watchdog: sp805_wdt: add arm cmsdk apb wdt support
watchdog: sp5100_tco: Fix a memory leak of EFCH MMIO resource
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are ARM cpufreq updates and operating performance points (OPP)
updates plus one cpuidle update adding a new trace point.
Specifics:
- Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang).
- Minor cleanups and support for new boards for Qcom cpufreq drivers
(Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang).
- Fix sparse warnings for Tegra cpufreq driver (Viresh Kumar).
- Make dev_pm_opp_set_regulators() accept NULL terminated list
(Viresh Kumar).
- Add dev_pm_opp_set_config() and friends and migrate other users and
helpers to using them (Viresh Kumar).
- Add support for multiple clocks for a device (Viresh Kumar and
Krzysztof Kozlowski).
- Configure resources before adding OPP table for Venus (Stanimir
Varbanov).
- Keep reference count up for opp->np and opp_table->np while they
are still in use (Liang He).
- Minor OPP cleanups (Viresh Kumar and Yang Li).
- Add a trace event for cpuidle to track missed (too deep or too
shallow) wakeups (Kajetan Puchalski)"
* tag 'pm-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits)
cpuidle: Add cpu_idle_miss trace event
venus: pm_helpers: Fix warning in OPP during probe
OPP: Don't drop opp->np reference while it is still in use
OPP: Don't drop opp_table->np reference while it is still in use
cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM6375 compatible
dt-bindings: opp: Add msm8939 to the compatible list
dt-bindings: opp: Add missing compat devices
dt-bindings: opp: opp-v2-kryo-cpu: Fix example binding checks
cpufreq: Change order of online() CB and policy->cpus modification
cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call
cpufreq: qcom-hw: Disable LMH irq when disabling policy
cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled
cpufreq: qcom-cpufreq-hw: use HZ_PER_KHZ macro in units.h
cpufreq: mediatek: fix error return code in mtk_cpu_dvfs_info_init()
OPP: Remove dev{m}_pm_opp_of_add_table_noclk()
PM / devfreq: tegra30: Register config_clks helper
OPP: Allow config_clks helper for single clk case
OPP: Provide a simple implementation to configure multiple clocks
OPP: Assert clk_count == 1 for single clk helpers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These fix an error code path issue leading to a NULL pointer
dereference, drop Kconfig dependencies that are not needed any more
after recent changes, add CPU IDs for new chips to a driver and fix up
the tmon utility.
Specifics:
- Fix NULL pointer dereference in the thermal sysfs interface that
results from an error code path mishandling (Rafael Wysocki).
- Drop COMPILE_TEST dependency that's not needed any more from two
thermal Kconfig entries (Jean Delvare).
- Make the Intel TCC cooling driver support Alder Lake-N and Raptor
Lake-P (Sumeet Pawnikar).
- Fix possible path truncations in the tmon utility (Florian
Fainelli)"
* tag 'thermal-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tools/thermal: Fix possible path truncations
thermal: Drop obsolete dependency on COMPILE_TEST
thermal: sysfs: Fix cooling_device_stats_setup() error code path
thermal: intel: Add TCC cooling support for Alder Lake-N and Raptor Lake-P
|
|
If a source file has the same name as a module then kbuild only supports
a single source file in the module.
Rename vfio.c to vfio_main.c so that we can have more that one .c file
in vfio.ko.
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Yishai Hadas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alex Williamson <[email protected]>
|
|
WRITE_ONCE() should happen at the original var, not on a local
copy of it.
Cc: [email protected]
Fixes: 59eda6ce824e ("drm/i915/gt: Batch TLB invalidations")
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
[added cc-stable while merging it]
Link: https://patchwork.freedesktop.org/patch/msgid/f9550e6bacea10131ff40dd8981b69eb9251cdcd.1659598090.git.mchehab@kernel.org
(cherry picked from commit 3d037d99e61a1e7a3ae3d214146d88db349dd19f)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"A new driver for bcm63138, is31fl319x updates, fixups for multicolor.
The clevo-mail driver got disabled, it needs an API fix"
* tag 'leds-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (23 commits)
leds: is31fl319x: use simple i2c probe function
leds: is31fl319x: Fix devm vs. non-devm ordering
leds: is31fl319x: Make use of dev_err_probe()
leds: is31fl319x: Make use of device properties
leds: is31fl319x: Cleanup formatting and dev_dbg calls
leds: is31fl319x: Add support for is31fl319{0,1,3} chips
leds: is31fl319x: Move chipset-specific values in chipdef struct
leds: is31fl319x: Use non-wildcard names for vars, structs and defines
leds: is31fl319x: Add missing si-en compatibles
dt-bindings: leds: pwm-multicolor: document max-brigthness
leds: turris-omnia: convert to use dev_groups
leds: leds-bcm63138: get rid of LED_OFF
leds: add help info about BCM63138 module name
dt-bindings: leds: leds-bcm63138: unify full stops in descriptions
dt-bindings: leds: lp50xx: fix LED children names
dt-bindings: leds: class-multicolor: reference class directly in multi-led node
leds: bcm63138: add support for BCM63138 controller
dt-bindings: leds: add Broadcom's BCM63138 controller
leds: clevo-mail: Mark as broken pending interface fix
leds: pwm-multicolor: Support active-low LEDs
...
|
|
The ACPI_FADT_LOW_POWER_S0 flag merely means that it is better to
use low-power S0 idle on the given platform than S3 (provided that
the latter is supported) and it doesn't preclude using either of
them (which of them will be used depends on the choices made by user
space).
For this reason, there is no benefit from checking that flag in
use_acpi_alarm_quirks().
First off, it cannot be a bug to do S3 with use_acpi_alarm set,
because S3 can be used on systems with ACPI_FADT_LOW_POWER_S0 and it
must work if really supported, so the ACPI_FADT_LOW_POWER_S0 check is
not needed to protect the S3-capable systems from failing.
Second, suspend-to-idle can be carried out on a system with
ACPI_FADT_LOW_POWER_S0 unset and it is expected to work, so if setting
use_acpi_alarm is needed to handle that case correctly, it should be
set regardless of the ACPI_FADT_LOW_POWER_S0 value.
Accordingly, drop the ACPI_FADT_LOW_POWER_S0 check from
use_acpi_alarm_quirks().
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Mario Limonciello <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/12054246.O9o76ZdvQC@kreacher
|
|
fract_tick is used uninitialized when fract_offset is 0
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Reviewed-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.0-rc1.
It was delayed from last week as I wanted to make sure the last commit
here got some good testing in linux-next and elsewhere as it seemed to
show up only late in testing for some reason.
Nothing major here, just lots of cleanups from Jiri and Ilpo to make
the tty core cleaner (Jiri) and the rs485 code simpler to use (Ilpo).
Also included in here is the obligatory n_gsm updates from Daniel
Starke and lots of tiny driver updates and minor fixes and tweaks for
other smaller serial drivers.
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits)
tty: serial: qcom-geni-serial: Fix %lu -> %u in print statements
tty: amiserial: Fix comment typo
tty: serial: document uart_get_console()
tty: serial: serial_core, reformat kernel-doc for functions
Documentation: serial: link uart_ops properly
Documentation: serial: move GPIO kernel-doc to the functions
Documentation: serial: dedup kernel-doc for uart functions
Documentation: serial: move uart_ops documentation to the struct
dt-bindings: serial: snps-dw-apb-uart: Document Rockchip RV1126
serial: mvebu-uart: uart2 error bits clearing
tty: serial: fsl_lpuart: correct the count of break characters
serial: stm32: make info structs static to avoid sparse warnings
serial: fsl_lpuart: zero out parity bit in CS7 mode
tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
serial: 8250_bcm2835aux: Add missing clk_disable_unprepare()
tty: vt: initialize unicode screen buffer
serial: remove VR41XX serial driver
serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags
serial: 8250_dwlib: remove redundant sanity check for RS485 flags
dt_bindings: rs485: Correct delay values
...
|
|
The obj->base.resv may be shared across many objects, some of which may
still be live and locked, preventing objects from being freed
indefintely. We could individualise the lock during the free, or rely on
a freed object having no contention and being able to immediately free
the pages it owns.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/6469
Fixes: be7612fd6665 ("drm/i915: Require object lock when freeing pages during destruction")
Fixes: 6cb12fbda1c2 ("drm/i915: Use trylock instead of blocking lock for __i915_gem_free_objects.")
Cc: <[email protected]> # v5.17+
Signed-off-by: Chris Wilson <[email protected]>
Tested-by: Nirmoy Das <[email protected]>
Acked-by: Nirmoy Das <[email protected]>
Signed-off-by: Nirmoy Das <[email protected]>
Reviewed-by: Matthew Auld <[email protected]>
Signed-off-by: Matthew Auld <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 7dd5c56531eb03696acdb17774721de5ef481c0b)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Invalidate TLB in batches, in order to reduce performance regressions.
Currently, every caller performs a full barrier around a TLB
invalidation, ignoring all other invalidations that may have already
removed their PTEs from the cache. As this is a synchronous operation
and can be quite slow, we cause multiple threads to contend on the TLB
invalidate mutex blocking userspace.
We only need to invalidate the TLB once after replacing our PTE to
ensure that there is no possible continued access to the physical
address before releasing our pages. By tracking a seqno for each full
TLB invalidate we can quickly determine if one has been performed since
rewriting the PTE, and only if necessary trigger one for ourselves.
That helps to reduce the performance regression introduced by TLB
invalidate logic.
[mchehab: rebased to not require moving the code to a separate file]
Cc: [email protected]
Fixes: 7938d61591d3 ("drm/i915: Flush TLBs before releasing backing store")
Suggested-by: Tvrtko Ursulin <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
Cc: Fei Yang <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Acked-by: Tvrtko Ursulin <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/4e97ef5deb6739cadaaf40aa45620547e9c4ec06.1658924372.git.mchehab@kernel.org
(cherry picked from commit 5d36acb7198b0e5eb88e6b701f9ad7b9448f8df9)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Merge additional changes in the thermal core and thermal tools updates
for 5.20-rc1:
- Fix NULL poiter dereference in the thermal sysfs interface that
results from an error code path mishandling (Rafael Wysocki).
- Drop COMPILE_TEST dependency that's not needed any more from two
thermal Kconfig entries (Jean Delvare).
- Fix possible path truncations in the tmon utility (Florian Fainelli).
* thermal-core:
thermal: Drop obsolete dependency on COMPILE_TEST
thermal: sysfs: Fix cooling_device_stats_setup() error code path
* thermal-tools:
tools/thermal: Fix possible path truncations
|
|
Merge ARM cpufreq updates for 5.20-rc1.
* pm-cpufreq:
cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM6375 compatible
dt-bindings: opp: Add msm8939 to the compatible list
dt-bindings: opp: Add missing compat devices
dt-bindings: opp: opp-v2-kryo-cpu: Fix example binding checks
cpufreq: Change order of online() CB and policy->cpus modification
cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call
cpufreq: qcom-hw: Disable LMH irq when disabling policy
cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled
cpufreq: qcom-cpufreq-hw: use HZ_PER_KHZ macro in units.h
cpufreq: mediatek: fix error return code in mtk_cpu_dvfs_info_init()
|
|
Merge operating performance points (OPP) updates for 5.20-rc1.
* pm-opp: (43 commits)
venus: pm_helpers: Fix warning in OPP during probe
OPP: Don't drop opp->np reference while it is still in use
OPP: Don't drop opp_table->np reference while it is still in use
OPP: Remove dev{m}_pm_opp_of_add_table_noclk()
PM / devfreq: tegra30: Register config_clks helper
OPP: Allow config_clks helper for single clk case
OPP: Provide a simple implementation to configure multiple clocks
OPP: Assert clk_count == 1 for single clk helpers
OPP: Add key specific assert() method to key finding helpers
OPP: Compare bandwidths for all paths in _opp_compare_key()
OPP: Allow multiple clocks for a device
dt-bindings: opp: accept array of frequencies
OPP: Make dev_pm_opp_set_opp() independent of frequency
OPP: Reuse _opp_compare_key() in _opp_add_static_v2()
OPP: Remove rate_not_available parameter to _opp_add()
OPP: Use consistent names for OPP table instances
OPP: Use generic key finding helpers for bandwidth key
OPP: Use generic key finding helpers for level key
OPP: Add generic key finding helpers and use them for freq APIs
OPP: Remove dev_pm_opp_find_freq_ceil_by_volt()
...
|
|
In order to make the underneath API easier to change in the future,
prevent users from dereferencing fwnode from struct device.
Instead, use the specific dev_fwnode() and device_match_fwnode()
APIs for that.
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Eric Auger <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull hwspinlock updates from Bjorn Andersson:
"This removes the need for representing the Qualcomm SFPB mutex using
an intermediate syscon node and it clean up the pm_runtime_get_sync()
usage in the OMAP hwspinlock driver"
* tag 'hwlock-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
hwspinlock: qcom: Add support for mmio usage to sfpb-mutex
hwspinlock: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
|
|
git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- mtk:
- use rx_callback instead of cmdq_task_cb
- qcom:
- add syscon const
- add SM6375 compatible
- imx:
- enable RST channel
- clear pending irqs
* tag 'mailbox-v5.20' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: imx: clear pending interrupts
dt-bindings: mailbox: qcom-ipcc: Add SM6375 compatible
mailbox: imx: support RST channel
dt-bindings: mailbox: imx-mu: add RST channel
dt-bindings: mailbox: qcom,apcs-kpss-global: Add syscon const for relevant entries
mailbox: mtk-cmdq: Remove proprietary cmdq_task_cb
|
|
Skip all further TLB invalidations once the device is wedged and
had been reset, as, on such cases, it can no longer process instructions
on the GPU and the user no longer has access to the TLB's in each engine.
So, an attempt to do a TLB cache invalidation will produce a timeout.
That helps to reduce the performance regression introduced by TLB
invalidate logic.
Cc: [email protected]
Fixes: 7938d61591d3 ("drm/i915: Flush TLBs before releasing backing store")
Signed-off-by: Chris Wilson <[email protected]>
Cc: Fei Yang <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Acked-by: Thomas Hellström <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/5aa86564b9ec5fe7fe605c1dd7de76855401ed73.1658924372.git.mchehab@kernel.org
(cherry picked from commit be0366f168033374a93e4c43fdaa1a90ab905184)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Ensure that the TLB of the OA unit is also invalidated
on gen12 HW, as just invalidating the TLB of an engine is not
enough.
Cc: [email protected]
Fixes: 7938d61591d3 ("drm/i915: Flush TLBs before releasing backing store")
Signed-off-by: Chris Wilson <[email protected]>
Cc: Fei Yang <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Acked-by: Tvrtko Ursulin <[email protected]>
Acked-by: Thomas Hellström <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/59724d9f5cf1e93b1620d01b8332ac991555283d.1658924372.git.mchehab@kernel.org
(cherry picked from commit dfc83de118ff7930acc9a4c8dfdba7c153aa44d6)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Check if the device is powered down prior to any engine activity,
as, on such cases, all the TLBs were already invalidated, so an
explicit TLB invalidation is not needed, thus reducing the
performance regression impact due to it.
This becomes more significant with GuC, as it can only do so when
the connection to the GuC is awake.
Cc: [email protected]
Fixes: 7938d61591d3 ("drm/i915: Flush TLBs before releasing backing store")
Signed-off-by: Chris Wilson <[email protected]>
Cc: Fei Yang <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Acked-by: Thomas Hellström <[email protected]>
Acked-by: Tvrtko Ursulin <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/278a57a672edac75683f0818b292e95da583a5fe.1658924372.git.mchehab@kernel.org
(cherry picked from commit 4bedceaed1ae1172cfe72d3ff752b3a1d32fe4d9)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
The kernel only manages the ccs state with lmem-only objects, however
the kernel should still take care not to leak the CCS state from the
previous user.
Fixes: 48760ffe923a ("drm/i915/gt: Clear compress metadata for Flat-ccs objects")
Signed-off-by: Matthew Auld <[email protected]>
Cc: Thomas Hellström <[email protected]>
Cc: Ramalingam C <[email protected]>
Reviewed-by: Ramalingam C <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 353819d85f87be46aeb9c1dd929d445a006fc6ec)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
PCI bar resize only works with 64 bit BAR so disable
this on 32-bit machine and resolve below compilation error:
drivers/gpu/drm/i915/gt/intel_region_lmem.c:94:23: error: result of
comparison of constant 4294967296 with expression of type
'resource_size_t' (aka 'unsigned int') is always false
[-Werror,-Wtautological-constant-out-of-range-compare]
root_res->start > 0x100000000ull)
Fixes: a91d1a17cd341 ("drm/i915: Add support for LMEM PCIe resizable bar")
Reported-by: Linux Kernel Functional Testing <[email protected]>
Tested-by: Linux Kernel Functional Testing <[email protected]>
Acked-by: Matthew Auld <[email protected]>
Signed-off-by: Nirmoy Das <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Signed-off-by: Matthew Auld <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit f5dfbfc0ae00c2c2c0518da9e1f9a8cca50ae544)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
"A few miscellaneous patches. There is no large patch series for this
merge window"
* tag 'hyperv-next-signed-20220807' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: Create debugfs file with hyper-v balloon usage information
drm/hyperv : Removing the restruction of VRAM allocation with PCI bar size
PCI: hv: Take a const cpumask in hv_compose_msi_req_get_cpu()
Drivers: hv: vm_bus: Handle vmbus rescind calls after vmbus is suspended
|
|
devm_regulator_get_optional() API will return -ENODEV if the regulator was
not found. For the optional supplies CX, PX we should not fail in that case
but rather continue. So let's catch that error and continue silently if
those regulators are not found.
The commit 3f52d118f992 ("remoteproc: qcom_q6v5_pas: Deal silently with
optional px and cx regulators") was supposed to do the same but it missed
the fact that devm_regulator_get_optional() API returns -ENODEV when the
regulator was not found.
Cc: Abel Vesa <[email protected]>
Fixes: 3f52d118f992 ("remoteproc: qcom_q6v5_pas: Deal silently with optional px and cx regulators")
Reported-by: Steev Klimaszewski <[email protected]>
Reviewed-by: Abel Vesa <[email protected]>
Reviewed-by: Johan Hovold <[email protected]>
Tested-by: Steev Klimaszewski <[email protected]>
Signed-off-by: Manivannan Sadhasivam <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
MIPS doesn't declare find_pch_pic(), which makes a build warning:
>> drivers/irqchip/irq-loongson-pch-pic.c:51:5: warning: no previous prototype for function 'find_pch_pic' [-Wmissing-prototypes]
int find_pch_pic(u32 gsi)
^
drivers/irqchip/irq-loongson-pch-pic.c:51:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int find_pch_pic(u32 gsi)
^
static
1 warning generated.
Move find_pch_pic() into CONFIG_ACPI which only used by LoongArch to fix
the warning.
BTW, remove the duplicated declaration of find_pch_pic() in irq.h.
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
When we call xdp_convert_buff_to_frame() to get xdpf, if it returns
NULL, we should check if xdp_page was allocated by xdp_linearize_page().
If it is newly allocated, it should be freed here alone. Just like any
other "goto err_xdp".
Fixes: 44fa2dbd4759 ("xdp: transition into using xdp_frame for ndo_xdp_xmit")
Signed-off-by: Xuan Zhuo <[email protected]>
Acked-by: Jason Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Sparse warns:
drivers/net/wireless/microchip/wilc1000/hif.h:218:35: error: marked inline, but without a definition
Remove the inline, it's not needed.
Reported-by: Jakub Kicinski <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Acked-by: Ajay Singh <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
In this function, there are two refcount leak bugs:
(1) when breaking out of for_each_endpoint_of_node(), we need call
the of_node_put() for the 'ep';
(2) we should call of_node_put() for the reference returned by
of_graph_get_remote_port() when it is not used anymore.
Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Liang He <[email protected]>
Acked-by: Martin Blumenstingl <[email protected]>
Acked-by: Neil Armstrong <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Pull bitmap updates from Yury Norov:
- fix the duplicated comments on bitmap_to_arr64() (Qu Wenruo)
- optimize out non-atomic bitops on compile-time constants (Alexander
Lobakin)
- cleanup bitmap-related headers (Yury Norov)
- x86/olpc: fix 'logical not is only applied to the left hand side'
(Alexander Lobakin)
- lib/nodemask: inline wrappers around bitmap (Yury Norov)
* tag 'bitmap-6.0-rc1' of https://github.com/norov/linux: (26 commits)
lib/nodemask: inline next_node_in() and node_random()
powerpc: drop dependency on <asm/machdep.h> in archrandom.h
x86/olpc: fix 'logical not is only applied to the left hand side'
lib/cpumask: move some one-line wrappers to header file
headers/deps: mm: align MANITAINERS and Docs with new gfp.h structure
headers/deps: mm: Split <linux/gfp_types.h> out of <linux/gfp.h>
headers/deps: mm: Optimize <linux/gfp.h> header dependencies
lib/cpumask: move trivial wrappers around find_bit to the header
lib/cpumask: change return types to unsigned where appropriate
cpumask: change return types to bool where appropriate
lib/bitmap: change type of bitmap_weight to unsigned long
lib/bitmap: change return types to bool where appropriate
arm: align find_bit declarations with generic kernel
iommu/vt-d: avoid invalid memory access via node_online(NUMA_NO_NODE)
lib/test_bitmap: test the tail after bitmap_to_arr64()
lib/bitmap: fix off-by-one in bitmap_to_arr64()
lib: test_bitmap: add compile-time optimization/evaluations assertions
bitmap: don't assume compiler evaluates small mem*() builtins calls
net/ice: fix initializing the bitmap in the switch code
bitops: let optimize out non-atomic bitops on compile-time constants
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"The two major changes in this patchset corrects VGA modes, color
handling and various other smaller fixes in the Atari framebuffer (by
Geert Uytterhoeven), and devm_* conversion, platform data fixes and
header cleanups in the imxfb driver (by Uwe Kleine-König).
Other small patches clean up code in sa1100fb, cirrusfb and omapfb,
fix a refcount leak in amba-clcd (by Liang He), and adds parameter
checks to arkfb, i740fb, vt8623fb and s3fb (by Zheyu Ma)"
* tag 'for-5.20/fbdev-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (27 commits)
video: fbdev: s3fb: Check the size of screen before memset_io()
video: fbdev: arkfb: Check the size of screen before memset_io()
video: fbdev: vt8623fb: Check the size of screen before memset_io()
video: fbdev: i740fb: Check the argument of i740_calc_vclk()
video: fbdev: arkfb: Fix a divide-by-zero bug in ark_set_pixclock()
video: fbdev: imxfb: fix return value check in imxfb_probe()
video: fbdev: sis: fix typos in SiS_GetModeID()
video: fbdev: imxfb: Convert request_mem_region + ioremap to devm_ioremap_resource
video: fbdev: imxfb: Fold <linux/platform_data/video-imxfb.h> into only user
video: fbdev: imxfb: Drop unused symbols from header
video: fbdev: imxfb: Drop platform data support
video: fbdev: amba-clcd: Fix refcount leak bugs
video: fbdev: omapfb: Unexport omap*_update_window_async()
video: fbdev: atari: Remove backward bug-compatibility
video: fbdev: atari: Remove unused definitions and variables
video: fbdev: atari: Fix VGA modes
video: fbdev: atari: Fix TT High video mode vertical refresh
video: fbdev: atari: Remove unneeded casts to void *
video: fbdev: atari: Remove unneeded casts from void *
video: fbdev: atari: Fix ext_setcolreg()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Rework copy_oldmem_page() callback to take an iov_iter.
This includes a few prerequisite updates and fixes to the oldmem
reading code.
- Rework cpufeature implementation to allow for various CPU feature
indications, which is not only limited to hardware capabilities, but
also allows CPU facilities.
- Use the cpufeature rework to autoload Ultravisor module when CPU
facility 158 is available.
- Add ELF note type for encrypted CPU state of a protected virtual CPU.
The zgetdump tool from s390-tools package will decrypt the CPU state
using a Customer Communication Key and overwrite respective notes to
make the data accessible for crash and other debugging tools.
- Use vzalloc() instead of vmalloc() + memset() in ChaCha20 crypto
test.
- Fix incorrect recovery of kretprobe modified return address in
stacktrace.
- Switch the NMI handler to use generic irqentry_nmi_enter() and
irqentry_nmi_exit() helper functions.
- Rework the cryptographic Adjunct Processors (AP) pass-through design
to support dynamic changes to the AP matrix of a running guest as
well as to implement more of the AP architecture.
- Minor boot code cleanups.
- Grammar and typo fixes to hmcdrv and tape drivers.
* tag 's390-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (46 commits)
Revert "s390/smp: enforce lowcore protection on CPU restart"
Revert "s390/smp: rework absolute lowcore access"
Revert "s390/smp,ptdump: add absolute lowcore markers"
s390/unwind: fix fgraph return address recovery
s390/nmi: use irqentry_nmi_enter()/irqentry_nmi_exit()
s390: add ELF note type for encrypted CPU state of a PV VCPU
s390/smp,ptdump: add absolute lowcore markers
s390/smp: rework absolute lowcore access
s390/setup: rearrange absolute lowcore initialization
s390/boot: cleanup adjust_to_uv_max() function
s390/smp: enforce lowcore protection on CPU restart
s390/tape: fix comment typo
s390/hmcdrv: fix Kconfig "its" grammar
s390/docs: fix warnings for vfio_ap driver doc
s390/docs: fix warnings for vfio_ap driver lock usage doc
s390/crash: support multi-segment iterators
s390/crash: use static swap buffer for copy_to_user_real()
s390/crash: move copy_to_user_real() to crash_dump.c
s390/zcore: fix race when reading from hardware system area
s390/crash: fix incorrect number of bytes to copy to user space
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for syscall stack randomization
- Add support for atomic operations to the 32 & 64-bit BPF JIT
- Full support for KASAN on 64-bit Book3E
- Add a watchdog driver for the new PowerVM hypervisor watchdog
- Add a number of new selftests for the Power10 PMU support
- Add a driver for the PowerVM Platform KeyStore
- Increase the NMI watchdog timeout during live partition migration, to
avoid timeouts due to increased memory access latency
- Add support for using the 'linux,pci-domain' device tree property for
PCI domain assignment
- Many other small features and fixes
Thanks to Alexey Kardashevskiy, Andy Shevchenko, Arnd Bergmann, Athira
Rajeev, Bagas Sanjaya, Christophe Leroy, Erhard Furtner, Fabiano Rosas,
Greg Kroah-Hartman, Greg Kurz, Haowen Bai, Hari Bathini, Jason A.
Donenfeld, Jason Wang, Jiang Jian, Joel Stanley, Juerg Haefliger, Kajol
Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Masahiro Yamada,
Maxime Bizon, Miaoqian Lin, Murilo Opsfelder Araújo, Nathan Lynch,
Naveen N. Rao, Nayna Jain, Nicholas Piggin, Ning Qiang, Pali Rohár,
Petr Mladek, Rashmica Gupta, Sachin Sant, Scott Cheloha, Segher
Boessenkool, Stephen Rothwell, Uwe Kleine-König, Wolfram Sang, Xiu
Jianfeng, and Zhouyi Zhou.
* tag 'powerpc-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (191 commits)
powerpc/64e: Fix kexec build error
EDAC/ppc_4xx: Include required of_irq header directly
powerpc/pci: Fix PHB numbering when using opal-phbid
powerpc/64: Init jump labels before parse_early_param()
selftests/powerpc: Avoid GCC 12 uninitialised variable warning
powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address
powerpc/xive: Fix refcount leak in xive_get_max_prio
powerpc/spufs: Fix refcount leak in spufs_init_isolated_loader
powerpc/perf: Include caps feature for power10 DD1 version
powerpc: add support for syscall stack randomization
powerpc: Move system_call_exception() to syscall.c
powerpc/powernv: rename remaining rng powernv_ functions to pnv_
powerpc/powernv/kvm: Use darn for H_RANDOM on Power9
powerpc/powernv: Avoid crashing if rng is NULL
selftests/powerpc: Fix matrix multiply assist test
powerpc/signal: Update comment for clarity
powerpc: make facility_unavailable_exception 64s
powerpc/platforms/83xx/suspend: Remove write-only global variable
powerpc/platforms/83xx/suspend: Prevent unloading the driver
powerpc/platforms/83xx/suspend: Reorder to get rid of a forward declaration
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Enabling the FPU is now a static_key
- Improvements to the Svpbmt support
- CPU topology bindings for a handful of systems
- Support for systems with 64-bit hart IDs
- Many settings have been enabled in the defconfig, including both
support for the StarFive systems and many of the Docker requirements
There are also a handful of cleanups and improvements, as usual.
* tag 'riscv-for-linus-5.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (28 commits)
riscv: enable Docker requirements in defconfig
riscv: convert the t-head pbmt errata to use the __nops macro
riscv: introduce nops and __nops macros for NOP sequences
RISC-V: Add fast call path of crash_kexec()
riscv: mmap with PROT_WRITE but no PROT_READ is invalid
riscv/efi_stub: Add 64bit boot-hartid support on RV64
riscv: cpu: Add 64bit hartid support on RV64
riscv: smp: Add 64bit hartid support on RV64
riscv: spinwait: Fix hartid variable type
riscv: cpu_ops_sbi: Add 64bit hartid support on RV64
riscv: dts: sifive: "fix" pmic watchdog node name
riscv: dts: canaan: Add k210 topology information
riscv: dts: sifive: Add fu740 topology information
riscv: dts: sifive: Add fu540 topology information
riscv: dts: starfive: Add JH7100 CPU topology
RISC-V: Add CONFIG_{NON,}PORTABLE
riscv: config: enable SOC_STARFIVE in defconfig
riscv: dts: microchip: Add mpfs' topology information
riscv: Kconfig.socs: Add comments
riscv: Kconfig.erratas: Add comments
...
|
|
This reverts commit 4bf7fda4dce22214c70c49960b1b6438e6260b67.
It turns out that it was hopelessly naive to think that this would work,
considering that we've always done this. The first machine I actually
tested this on broke at bootup, getting to
Reached target cryptsetup.target - Local Encrypted Volumes.
and then hanging. It's unclear what actually fails, since there's a lot
else going on around that time (eg amdgpu probing also happens around
that same time, but it could be some other random init thing that didn't
complete earlier and just caused the boot to hang at that point).
The expectations that we should default to some unsafe and untested mode
seems entirely unfounded, and the belief that this wouldn't affect
modern systems is clearly entirely false. The machine in question is
about two years old, so it's not exactly shiny, but it's also not some
dusty old museum piece PDP-11 in a closet.
Cc: Robin Murphy <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: John Garry <[email protected]>
Cc: Joerg Roedel <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull more device mapper updates from Mike Snitzer:
- Add flags argument to dm_bufio_client_create and introduce
DM_BUFIO_CLIENT_NO_SLEEP flag to have dm-bufio use spinlock rather
than mutex for its locking.
- Add optional "try_verify_in_tasklet" feature to DM verity target.
This feature gives users the option to improve IO latency by using a
tasklet to verify, using hashes in bufio's cache, rather than wait to
schedule a work item via workqueue. But if there is a bufio cache
miss, or an error, then the tasklet will fallback to using workqueue.
- Incremental changes to both dm-bufio and the DM verity target to use
jump_label to minimize cost of branching associated with the niche
"try_verify_in_tasklet" feature. DM-bufio in particular is used by
quite a few other DM targets so it doesn't make sense to incur
additional bufio cost in those targets purely for the benefit of this
niche verity feature if the feature isn't ever used.
- Optimize verity_verify_io, which is used by both workqueue and
tasklet based verification, if FEC is not configured or tasklet based
verification isn't used.
- Remove DM verity target's verify_wq's use of the WQ_CPU_INTENSIVE
flag since it uses WQ_UNBOUND. Also, use the WQ_HIGHPRI flag if
"try_verify_in_tasklet" is specified.
* tag 'for-6.0/dm-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm verity: have verify_wq use WQ_HIGHPRI if "try_verify_in_tasklet"
dm verity: remove WQ_CPU_INTENSIVE flag since using WQ_UNBOUND
dm verity: only copy bvec_iter in verity_verify_io if in_tasklet
dm verity: optimize verity_verify_io if FEC not configured
dm verity: conditionally enable branching for "try_verify_in_tasklet"
dm bufio: conditionally enable branching for DM_BUFIO_CLIENT_NO_SLEEP
dm verity: allow optional args to alter primary args handling
dm verity: Add optional "try_verify_in_tasklet" feature
dm bufio: Add DM_BUFIO_CLIENT_NO_SLEEP flag
dm bufio: Add flags argument to dm_bufio_client_create
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- convert arm32 to the common dma-direct code (Arnd Bergmann, Robin
Murphy, Christoph Hellwig)
- restructure the PCIe peer to peer mapping support (Logan Gunthorpe)
- allow the IOMMU code to communicate an optional DMA mapping length
and use that in scsi and libata (John Garry)
- split the global swiotlb lock (Tianyu Lan)
- various fixes and cleanup (Chao Gao, Dan Carpenter, Dongli Zhang,
Lukas Bulwahn, Robin Murphy)
* tag 'dma-mapping-5.20-2022-08-06' of git://git.infradead.org/users/hch/dma-mapping: (45 commits)
swiotlb: fix passing local variable to debugfs_create_ulong()
dma-mapping: reformat comment to suppress htmldoc warning
PCI/P2PDMA: Remove pci_p2pdma_[un]map_sg()
RDMA/rw: drop pci_p2pdma_[un]map_sg()
RDMA/core: introduce ib_dma_pci_p2p_dma_supported()
nvme-pci: convert to using dma_map_sgtable()
nvme-pci: check DMA ops when indicating support for PCI P2PDMA
iommu/dma: support PCI P2PDMA pages in dma-iommu map_sg
iommu: Explicitly skip bus address marked segments in __iommu_map_sg()
dma-mapping: add flags to dma_map_ops to indicate PCI P2PDMA support
dma-direct: support PCI P2PDMA pages in dma-direct map_sg
dma-mapping: allow EREMOTEIO return code for P2PDMA transfers
PCI/P2PDMA: Introduce helpers for dma_map_sg implementations
PCI/P2PDMA: Attempt to set map_type if it has not been set
lib/scatterlist: add flag for indicating P2PDMA segments in an SGL
swiotlb: clean up some coding style and minor issues
dma-mapping: update comment after dmabounce removal
scsi: sd: Add a comment about limiting max_sectors to shost optimal limit
ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors
scsi: scsi_transport_sas: cap shost opt_sectors according to DMA optimal limit
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- The most intrusive patch is small and changes the default allocation
policy for DMA addresses.
Before the change the allocator tried its best to find an address in
the first 4GB. But that lead to performance problems when that space
gets exhaused, and since most devices are capable of 64-bit DMA these
days, we changed it to search in the full DMA-mask range from the
beginning.
This change has the potential to uncover bugs elsewhere, in the
kernel or the hardware. There is a Kconfig option and a command line
option to restore the old behavior, but none of them is enabled by
default.
- Add Robin Murphy as reviewer of IOMMU code and maintainer for the
dma-iommu and iova code
- Chaning IOVA magazine size from 1032 to 1024 bytes to save memory
- Some core code cleanups and dead-code removal
- Support for ACPI IORT RMR node
- Support for multiple PCI domains in the AMD-Vi driver
- ARM SMMU changes from Will Deacon:
- Add even more Qualcomm device-tree compatible strings
- Support dumping of IMP DEF Qualcomm registers on TLB sync
timeout
- Fix reference count leak on device tree node in Qualcomm driver
- Intel VT-d driver updates from Lu Baolu:
- Make intel-iommu.h private
- Optimize the use of two locks
- Extend the driver to support large-scale platforms
- Cleanup some dead code
- MediaTek IOMMU refactoring and support for TTBR up to 35bit
- Basic support for Exynos SysMMU v7
- VirtIO IOMMU driver gets a map/unmap_pages() implementation
- Other smaller cleanups and fixes
* tag 'iommu-updates-v5.20-or-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (116 commits)
iommu/amd: Fix compile warning in init code
iommu/amd: Add support for AVIC when SNP is enabled
iommu/amd: Simplify and Consolidate Virtual APIC (AVIC) Enablement
ACPI/IORT: Fix build error implicit-function-declaration
drivers: iommu: fix clang -wformat warning
iommu/arm-smmu: qcom_iommu: Add of_node_put() when breaking out of loop
iommu/arm-smmu-qcom: Add SM6375 SMMU compatible
dt-bindings: arm-smmu: Add compatible for Qualcomm SM6375
MAINTAINERS: Add Robin Murphy as IOMMU SUBSYTEM reviewer
iommu/amd: Do not support IOMMUv2 APIs when SNP is enabled
iommu/amd: Do not support IOMMU_DOMAIN_IDENTITY after SNP is enabled
iommu/amd: Set translation valid bit only when IO page tables are in use
iommu/amd: Introduce function to check and enable SNP
iommu/amd: Globally detect SNP support
iommu/amd: Process all IVHDs before enabling IOMMU features
iommu/amd: Introduce global variable for storing common EFR and EFR2
iommu/amd: Introduce Support for Extended Feature 2 Register
iommu/amd: Change macro for IOMMU control register bit shift to decimal value
iommu/exynos: Enable default VM instance on SysMMU v7
iommu/exynos: Add SysMMU v7 register set
...
|