aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-10-02hwmon: (w83792d) Fix NULL pointer dereference by removing unnecessary ↵Nadezda Lutovinova1-17/+11
structure field If driver read val value sufficient for (val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). Cc: [email protected] Signed-off-by: Nadezda Lutovinova <[email protected]> Link: https://lore.kernel.org/r/[email protected] [groeck: Dropped unnecessary continuation lines, fixed multipline alignment] Signed-off-by: Guenter Roeck <[email protected]>
2021-10-02hwmon: (w83791d) Fix NULL pointer dereference by removing unnecessary ↵Nadezda Lutovinova1-18/+11
structure field If driver read val value sufficient for (val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). Cc: [email protected] Signed-off-by: Nadezda Lutovinova <[email protected]> Link: https://lore.kernel.org/r/[email protected] [groeck: Dropped unnecessary continuation lines, fixed multi-line alignment] Signed-off-by: Guenter Roeck <[email protected]>
2021-10-02hwmon: (pmbus/mp2975) Add missed POUT attribute for page 1 mp2975 controllerVadim Pasternak1-1/+1
Add missed attribute for reading POUT from page 1. It is supported by device, but has been missed in initial commit. Fixes: 2c6fcbb21149 ("hwmon: (pmbus) Add support for MPS Multi-phase mp2975 controller") Signed-off-by: Vadim Pasternak <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2021-10-02hwmon: (pmbus/ibm-cffps) max_power_out swap changesBrandon Wyman1-2/+8
The bytes for max_power_out from the ibm-cffps devices differ in byte order for some power supplies. The Witherspoon power supply returns the bytes in MSB/LSB order. The Rainier power supply returns the bytes in LSB/MSB order. The Witherspoon power supply uses version cffps1. The Rainier power supply should use version cffps2. If version is cffps1, swap the bytes before output to max_power_out. Tested: Witherspoon before: 3148. Witherspoon after: 3148. Rainier before: 53255. Rainier after: 2000. Signed-off-by: Brandon Wyman <[email protected]> Reviewed-by: Eddie James <[email protected]> Link: https://lore.kernel.org/r/[email protected] [groeck: Replaced yoda programming] Signed-off-by: Guenter Roeck <[email protected]>
2021-10-02hwmon: (occ) Fix P10 VRM temp sensorsEddie James1-12/+5
The P10 (temp sensor version 0x10) doesn't do the same VRM status reporting that was used on P9. It just reports the temperature, so drop the check for VRM fru type in the sysfs show function, and don't set the name to "alarm". Fixes: db4919ec86 ("hwmon: (occ) Add new temperature sensor type") Signed-off-by: Eddie James <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2021-10-02i2c: mediatek: Add OFFSET_EXT_CONF setting backKewei Xu1-1/+10
In the commit be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust support"), we miss setting OFFSET_EXT_CONF register if i2c->dev_comp->timing_adjust is false, now add it back. Fixes: be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust support") Signed-off-by: Kewei Xu <[email protected]> Reviewed-by: Qii Wang <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2021-10-02i2c: acpi: fix resource leak in reconfiguration device additionJamie Iles1-0/+1
acpi_i2c_find_adapter_by_handle() calls bus_find_device() which takes a reference on the adapter which is never released which will result in a reference count leak and render the adapter unremovable. Make sure to put the adapter after creating the client in the same manner that we do for OF. Fixes: 525e6fabeae2 ("i2c / ACPI: add support for ACPI reconfigure notifications") Signed-off-by: Jamie Iles <[email protected]> Acked-by: Mika Westerberg <[email protected]> [wsa: fixed title] Signed-off-by: Wolfram Sang <[email protected]>
2021-10-01net: stmmac: dwmac-rk: Fix ethernet on rk3399 based devicesPunit Agrawal1-0/+5
Commit 2d26f6e39afb ("net: stmmac: dwmac-rk: fix unbalanced pm_runtime_enable warnings") while getting rid of a runtime PM warning ended up breaking ethernet on rk3399 based devices. By dropping an extra reference to the device, the commit ends up enabling suspend / resume of the ethernet device - which appears to be broken. While the issue with runtime pm is being investigated, partially revert commit 2d26f6e39afb to restore the network on rk3399. Fixes: 2d26f6e39afb ("net: stmmac: dwmac-rk: fix unbalanced pm_runtime_enable warnings") Suggested-by: Heiko Stuebner <[email protected]> Signed-off-by: Punit Agrawal <[email protected]> Cc: Michael Riesch <[email protected]> Tested-by: Heiko Stuebner <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-10-01net: mscc: ocelot: fix VCAP filters remaining active after being deletedVladimir Oltean1-2/+2
When ocelot_flower.c calls ocelot_vcap_filter_add(), the filter has a given filter->id.cookie. This filter is added to the block->rules list. However, when ocelot_flower.c calls ocelot_vcap_block_find_filter_by_id() which passes the cookie as argument, the filter is never found by filter->id.cookie when searching through the block->rules list. This is unsurprising, since the filter->id.cookie is an unsigned long, but the cookie argument provided to ocelot_vcap_block_find_filter_by_id() is a signed int, and the comparison fails. Fixes: 50c6cc5b9283 ("net: mscc: ocelot: store a namespaced VCAP filter ID") Signed-off-by: Vladimir Oltean <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-10-01drm/msm/submit: fix overflow check on 64-bit architecturesArnd Bergmann1-1/+2
The overflow check does causes a warning from clang-14 when 'sz' is a type that is smaller than size_t: drivers/gpu/drm/msm/msm_gem_submit.c:217:10: error: result of comparison of constant 18446744073709551615 with expression of type 'unsigned int' is always false [-Werror,-Wtautological-constant-out-of-range-compare] if (sz == SIZE_MAX) { Change the type accordingly. Fixes: 20224d715a88 ("drm/msm/submit: Move copy_from_user ahead of locking bos") Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Clark <[email protected]>
2021-10-01Merge tag 's390-5.15-4' of ↵Linus Torvalds3-13/+45
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fix from Vasily Gorbik: "One fix for 5.15-rc4: Avoid CIO excessive path-verification requests, which might cause unwanted delays" * tag 's390-5.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cio: avoid excessive path-verification requests
2021-10-01drm/msm: One sched entity per process per priorityRob Clark3-21/+75
Some userspace apps make assumptions that rendering against multiple contexts within the same process (from the same thread, with appropriate MakeCurrent() calls) provides sufficient synchronization without any external synchronization (ie. glFenceSync()/glWaitSync()). Since a submitqueue maps to a gl/vk context, having multiple sched entities of the same priority only works with implicit sync enabled. To fix this, limit things to a single sched entity per priority level per process. An alternative would be sharing submitqueues between contexts in userspace, but tracking of per-context faults (ie. GL_EXT_robustness) is already done at the submitqueue level, so this is not an option. Signed-off-by: Rob Clark <[email protected]>
2021-10-01drm/msm: A bit more docs + cleanupRob Clark2-45/+57
msm_file_private is more gpu related, and in the next commit it will need access to other GPU specific #defines. While we're at it, add some comments. Signed-off-by: Rob Clark <[email protected]>
2021-10-01drm/msm/a6xx: Track current ctx by seqnoRob Clark4-4/+17
In theory a context can be destroyed and a new one allocated at the same address, making the pointer comparision to detect when we don't need to update the current pagetables invalid. Instead assign a sequence number to each context on creation, and use this for the check. Fixes: 84c31ee16f90 ("drm/msm/a6xx: Add support for per-instance pagetables") Signed-off-by: Rob Clark <[email protected]>
2021-10-01drm/msm/a6xx: Serialize GMU communicationRob Clark3-6/+43
I've seen some crashes in our crash reporting that *look* like multiple threads stomping on each other while communicating with GMU. So wrap all those paths in a lock. Signed-off-by: Rob Clark <[email protected]>
2021-10-01drm/msm: Fix crash on dev file closeRob Clark2-4/+3
If the device file was opened prior to fw being available (such as from initrd before rootfs is mounted, when the initrd does not contain GPU fw), that would cause a later crash when the dev file is closed due to unitialized submitqueues list: CPU: 4 PID: 263 Comm: plymouthd Tainted: G W 5.15.0-rc2-next-20210924 #2 Hardware name: LENOVO 81JL/LNVNB161216, BIOS 9UCN33WW(V2.06) 06/ 4/2019 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : msm_submitqueue_close+0x30/0x190 [msm] lr : msm_postclose+0x54/0xf0 [msm] sp : ffff80001074bb80 x29: ffff80001074bb80 x28: ffff03ad80c4db80 x27: ffff03ad80dc5ab0 x26: 0000000000000000 x25: ffff03ad80dc5af8 x24: ffff03ad81e90800 x23: 0000000000000000 x22: ffff03ad81e90800 x21: ffff03ad8b35e788 x20: ffff03ad81e90878 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: ffffda15f14f7940 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000040 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffda15cd18ff88 x8 : ffff03ad80c4db80 x7 : 0000000000000228 x6 : 0000000000000000 x5 : 1793a4e807e636bd x4 : ffff03ad80c4db80 x3 : ffff03ad81e90878 x2 : 0000000000000000 x1 : ffff03ad80c4db80 x0 : 0000000000000000 Call trace: msm_submitqueue_close+0x30/0x190 [msm] msm_postclose+0x54/0xf0 [msm] drm_file_free.part.0+0x1cc/0x2e0 [drm] drm_close_helper.isra.0+0x74/0x84 [drm] drm_release+0x78/0x120 [drm] __fput+0x78/0x23c ____fput+0x1c/0x30 task_work_run+0xcc/0x22c do_exit+0x304/0x9f4 do_group_exit+0x44/0xb0 __wake_up_parent+0x0/0x3c invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x4c/0xf4 do_el0_svc+0x30/0x9c el0_svc+0x20/0x60 el0t_64_sync_handler+0xe8/0xf0 el0t_64_sync+0x1a0/0x1a4 Code: aa0003f5 a90153f3 f8408eb3 aa1303e0 (f85e8674) ---[ end trace 39b2fa37509a2be2 ]--- Fixing recursive fault but reboot is needed! Fixes: 86c2a0f000c1 drm/msm: ("Small submitqueue creation cleanup") Reported-by: Steev Klimaszewski <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2021-10-01Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-7/+2
Pull more kvm fixes from Paolo Bonzini: "Small x86 fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: selftests: Ensure all migrations are performed when test is affined KVM: x86: Swap order of CPUID entry "index" vs. "significant flag" checks ptp: Fix ptp_kvm_getcrosststamp issue for x86 ptp_kvm x86/kvmclock: Move this_cpu_pvti into kvmclock.h selftests: KVM: Don't clobber XMM register when read KVM: VMX: Fix a TSX_CTRL_CPUID_CLEAR field mask issue
2021-10-01Merge tag 'drm-fixes-2021-10-01' of git://anongit.freedesktop.org/drm/drmLinus Torvalds25-77/+81
Pull drm fixes from Daniel Vetter: "Dave is out on a long w/e, should be back next week. Nothing nefarious, just a bunch of driver fixes: amdgpu, i915, tegra, and one exynos driver fix" * tag 'drm-fixes-2021-10-01' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu: force exit gfxoff on sdma resume for rmb s0ix drm/amdgpu: check tiling flags when creating FB on GFX8- drm/amd/display: Pass PCI deviceid into DC drm/amd/display: initialize backlight_ramping_override to false drm/amdgpu: correct initial cp_hqd_quantum for gfx9 drm/amd/display: Fix Display Flicker on embedded panels drm/amdgpu: fix gart.bo pin_count leak drm/i915: Remove warning from the rps worker drm/i915/request: fix early tracepoints drm/i915/guc, docs: Fix pdfdocs build error by removing nested grid gpu: host1x: Plug potential memory leak gpu/host1x: fence: Make spinlock static drm/tegra: uapi: Fix wrong mapping end address in case of disabled IOMMU drm/tegra: dc: Remove unused variables drm/exynos: Make use of the helper function devm_platform_ioremap_resource() drm/i915/gvt: fix the usage of ww lock in gvt scheduler.
2021-10-01Merge tag 'iommu-fixes-v5.15-rc3' of ↵Linus Torvalds2-24/+38
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - Two fixes for the new Apple DART driver to fix a kernel panic and a stale data usage issue - Intel VT-d fix for how PCI device ids are printed * tag 'iommu-fixes-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/dart: Clear sid2group entry when a group is freed iommu/vt-d: Drop "0x" prefix from PCI bus & device addresses iommu/dart: Remove iommu_flush_ops
2021-10-01Merge tag 'exynos-drm-fixes-for-v5.15-rc4' of ↵Daniel Vetter9-31/+9
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes One cleanup - Use devm_platform_ioremap_resource() helper function instead of old one. Signed-off-by: Daniel Vetter <[email protected]> From: Inki Dae <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-10-01Merge tag 'amd-drm-fixes-5.15-2021-09-29' of ↵Daniel Vetter7-11/+53
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.15-2021-09-29: amdgpu: - gart pin count fix - eDP flicker fix - GFX9 MQD fix - Display fixes - Tiling flags fix for pre-GFX9 - SDMA resume fix for S0ix Signed-off-by: Daniel Vetter <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-10-01Merge tag 'drm-intel-fixes-2021-09-30' of ↵Daniel Vetter5-23/+14
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.15-rc4: - Fix GVT scheduler ww lock usage - Fix pdfdocs documentation build - Fix request early tracepoints - Fix an invalid warning from rps worker Signed-off-by: Daniel Vetter <[email protected]> From: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-10-01Merge tag 'mlx5-fixes-2021-09-30' of ↵David S. Miller14-105/+194
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux mlx5-fixes-2021-09-30
2021-10-01Merge tag 'wireless-drivers-2021-10-01' of ↵David S. Miller8-25/+24
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers wireless-drivers fixes for v5.15 Second set of fixes for v5.15, nothing major this time. Most important here are reverting a brcmfmac regression and a fix for an old rare ath5k build error. iwlwifi * fixes to NULL dereference, off by one and missing unlock * add support for Killer AX1650 on Dell XPS 15 (9510) laptop ath5k * build fix with LEDS=m brcmfmac * revert a regression causing BCM4359/9 devices stop working as access point mwifiex * fix clang warning about null pointer arithmetic
2021-09-30phy: mdio: fix memory leakPavel Skripkin1-0/+7
Syzbot reported memory leak in MDIO bus interface, the problem was in wrong state logic. MDIOBUS_ALLOCATED indicates 2 states: 1. Bus is only allocated 2. Bus allocated and __mdiobus_register() fails, but device_register() was called In case of device_register() has been called we should call put_device() to correctly free the memory allocated for this device, but mdiobus_free() calls just kfree(dev) in case of MDIOBUS_ALLOCATED state To avoid this behaviour we need to set bus->state to MDIOBUS_UNREGISTERED _before_ calling device_register(), because put_device() should be called even in case of device_register() failure. Link: https://lore.kernel.org/netdev/[email protected]/ Fixes: 46abc02175b3 ("phylib: give mdio buses a device tree presence") Reported-and-tested-by: [email protected] Reviewed-by: Dan Carpenter <[email protected]> Signed-off-by: Pavel Skripkin <[email protected]> Link: https://lore.kernel.org/r/eceae1429fbf8fa5c73dd2a0d39d525aa905074d.1633024062.git.paskripkin@gmail.com Signed-off-by: Jakub Kicinski <[email protected]>
2021-09-30Revert "net: mdiobus: Fix memory leak in __mdiobus_register"Pavel Skripkin1-1/+0
This reverts commit ab609f25d19858513919369ff3d9a63c02cd9e2e. This patch is correct in the sense that we _should_ call device_put() in case of device_register() failure, but the problem in this code is more vast. We need to set bus->state to UNMDIOBUS_REGISTERED before calling device_register() to correctly release the device in mdiobus_free(). This patch prevents us from doing it, since in case of device_register() failure put_device() will be called 2 times and it will cause UAF or something else. Also, Reported-by: tag in revered commit was wrong, since syzbot reported different leak in same function. Link: https://lore.kernel.org/netdev/20210928092657.GI2048@kadam/ Acked-by: Yanfei Xu <[email protected]> Signed-off-by: Pavel Skripkin <[email protected]> Link: https://lore.kernel.org/r/f12fb1faa4eccf0f355788225335eb4309ff2599.1633024062.git.paskripkin@gmail.com Signed-off-by: Jakub Kicinski <[email protected]>
2021-09-30Merge tag 'net-5.15-rc4' of ↵Linus Torvalds33-137/+295
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes, including fixes from mac80211, netfilter and bpf. Current release - regressions: - bpf, cgroup: assign cgroup in cgroup_sk_alloc when called from interrupt - mdio: revert mechanical patches which broke handling of optional resources - dev_addr_list: prevent address duplication Previous releases - regressions: - sctp: break out if skb_header_pointer returns NULL in sctp_rcv_ootb (NULL deref) - Revert "mac80211: do not use low data rates for data frames with no ack flag", fixing broadcast transmissions - mac80211: fix use-after-free in CCMP/GCMP RX - netfilter: include zone id in tuple hash again, minimize collisions - netfilter: nf_tables: unlink table before deleting it (race -> UAF) - netfilter: log: work around missing softdep backend module - mptcp: don't return sockets in foreign netns - sched: flower: protect fl_walk() with rcu (race -> UAF) - ixgbe: fix NULL pointer dereference in ixgbe_xdp_setup - smsc95xx: fix stalled rx after link change - enetc: fix the incorrect clearing of IF_MODE bits - ipv4: fix rtnexthop len when RTA_FLOW is present - dsa: mv88e6xxx: 6161: use correct MAX MTU config method for this SKU - e100: fix length calculation & buffer overrun in ethtool::get_regs Previous releases - always broken: - mac80211: fix using stale frag_tail skb pointer in A-MSDU tx - mac80211: drop frames from invalid MAC address in ad-hoc mode - af_unix: fix races in sk_peer_pid and sk_peer_cred accesses (race -> UAF) - bpf, x86: Fix bpf mapping of atomic fetch implementation - bpf: handle return value of BPF_PROG_TYPE_STRUCT_OPS prog - netfilter: ip6_tables: zero-initialize fragment offset - mhi: fix error path in mhi_net_newlink - af_unix: return errno instead of NULL in unix_create1() when over the fs.file-max limit Misc: - bpf: exempt CAP_BPF from checks against bpf_jit_limit - netfilter: conntrack: make max chain length random, prevent guessing buckets by attackers - netfilter: nf_nat_masquerade: make async masq_inet6_event handling generic, defer conntrack walk to work queue (prevent hogging RTNL lock)" * tag 'net-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits) af_unix: fix races in sk_peer_pid and sk_peer_cred accesses net: stmmac: fix EEE init issue when paired with EEE capable PHYs net: dev_addr_list: handle first address in __hw_addr_add_ex net: sched: flower: protect fl_walk() with rcu net: introduce and use lock_sock_fast_nested() net: phy: bcm7xxx: Fixed indirect MMD operations net: hns3: disable firmware compatible features when uninstall PF net: hns3: fix always enable rx vlan filter problem after selftest net: hns3: PF enable promisc for VF when mac table is overflow net: hns3: fix show wrong state when add existing uc mac address net: hns3: fix mixed flag HCLGE_FLAG_MQPRIO_ENABLE and HCLGE_FLAG_DCB_ENABLE net: hns3: don't rollback when destroy mqprio fail net: hns3: remove tc enable checking net: hns3: do not allow call hns3_nic_net_open repeatedly ixgbe: Fix NULL pointer dereference in ixgbe_xdp_setup net: bridge: mcast: Associate the seqcount with its protecting lock. net: mdio-ipq4019: Fix the error for an optional regs resource net: hns3: fix hclge_dbg_dump_tm_pg() stack usage net: mdio: mscc-miim: Fix the mdio controller af_unix: Return errno instead of NULL in unix_create1(). ...
2021-09-30net/mlx5e: Mutually exclude setting of TX-port-TS and MQPRIO in channel modeAya Levin2-0/+19
TX-port-TS hijacks the PTP traffic to a specific HW TX-queue. This conflicts with MQPRIO in channel mode, which specifies explicitly which TC accepts the packet. This patch mutually excludes the above configuration. Fixes: ec60c4581bd9 ("net/mlx5e: Support MQPRIO channel mode") Signed-off-by: Aya Levin <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-09-30net/mlx5e: Fix the presented RQ index in PTP statsLama Kayal3-3/+5
PTP-RQ counters title format contains PTP-RQ identifier, which is mistakenly not passed to sprinft(). This leads to unexpected garbage values instead. This patch fixes it. Before applying the patch: ethtool -S eth3 | grep ptp_rq ptp_rq15_packets: 0 ptp_rq8_bytes: 0 ptp_rq6_csum_complete: 0 ptp_rq14_csum_complete_tail: 0 ptp_rq3_csum_complete_tail_slow : 0 ptp_rq9_csum_unnecessary: 0 ptp_rq1_csum_unnecessary_inner: 0 ptp_rq7_csum_none: 0 ptp_rq10_xdp_drop: 0 ptp_rq9_xdp_redirect: 0 ptp_rq13_lro_packets: 0 ptp_rq12_lro_bytes: 0 ptp_rq10_ecn_mark: 0 ptp_rq9_removed_vlan_packets: 0 ptp_rq5_wqe_err: 0 ptp_rq8_mpwqe_filler_cqes: 0 ptp_rq2_mpwqe_filler_strides: 0 ptp_rq5_oversize_pkts_sw_drop: 0 ptp_rq6_buff_alloc_err: 0 ptp_rq15_cqe_compress_blks: 0 ptp_rq2_cqe_compress_pkts: 0 ptp_rq2_cache_reuse: 0 ptp_rq12_cache_full: 0 ptp_rq11_cache_empty: 256 ptp_rq12_cache_busy: 0 ptp_rq11_cache_waive: 0 ptp_rq12_congst_umr: 0 ptp_rq11_arfs_err: 0 ptp_rq9_recover: 0 After applying the patch: ethtool -S eth3 | grep ptp_rq ptp_rq0_packets: 0 ptp_rq0_bytes: 0 ptp_rq0_csum_complete: 0 ptp_rq0_csum_complete_tail: 0 ptp_rq0_csum_complete_tail_slow : 0 ptp_rq0_csum_unnecessary: 0 ptp_rq0_csum_unnecessary_inner: 0 ptp_rq0_csum_none: 0 ptp_rq0_xdp_drop: 0 ptp_rq0_xdp_redirect: 0 ptp_rq0_lro_packets: 0 ptp_rq0_lro_bytes: 0 ptp_rq0_ecn_mark: 0 ptp_rq0_removed_vlan_packets: 0 ptp_rq0_wqe_err: 0 ptp_rq0_mpwqe_filler_cqes: 0 ptp_rq0_mpwqe_filler_strides: 0 ptp_rq0_oversize_pkts_sw_drop: 0 ptp_rq0_buff_alloc_err: 0 ptp_rq0_cqe_compress_blks: 0 ptp_rq0_cqe_compress_pkts: 0 ptp_rq0_cache_reuse: 0 ptp_rq0_cache_full: 0 ptp_rq0_cache_empty: 256 ptp_rq0_cache_busy: 0 ptp_rq0_cache_waive: 0 ptp_rq0_congst_umr: 0 ptp_rq0_arfs_err: 0 ptp_rq0_recover: 0 Fixes: a28359e922c6 ("net/mlx5e: Add PTP-RX statistics") Signed-off-by: Lama Kayal <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-09-30net/mlx5: Fix setting number of EQs of SFsShay Drory1-2/+3
When setting number of completion EQs of the SF, consider number of online CPUs. Without this consideration, when number of online cpus are less than 8, unnecessary 8 completion EQs are allocated. Fixes: c36326d38d93 ("net/mlx5: Round-Robin EQs over IRQs") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Parav Pandit <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-09-30net/mlx5: Fix length of irq_index in charsShay Drory1-2/+2
The maximum irq_index can be 2047, This means irq_name should have 4 characters reserve for the irq_index. Hence, increase it to 4. Fixes: 3af26495a247 ("net/mlx5: Enlarge interrupt field in CREATE_EQ") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Parav Pandit <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-09-30net/mlx5: Avoid generating event after PPS out in Real time modeAya Levin1-8/+6
When in Real-time mode, HW clock is synced with the PTP daemon. Hence driver should not re-calibrate the next pulse (via MTPPSE repetitive events mechanism). This patch arms repetitive events only in free-running mode. Fixes: 432119de33d9 ("net/mlx5: Add cyc2time HW translation mode support") Signed-off-by: Aya Levin <[email protected]> Reviewed-by: Eran Ben Elisha <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-09-30net/mlx5: Force round second at 1PPS out start timeAya Levin1-14/+11
Allow configuration of 1PPS start time only with time-stamp representing a round second. Prior to this patch driver allowed setting of a non-round-second which is not supported by the device. Avoid unexpected behavior by restricting start-time configuration to a round-second. Fixes: 4272f9b88db9 ("net/mlx5e: Change 1PPS out scheme") Signed-off-by: Aya Levin <[email protected]> Reviewed-by: Eran Ben Elisha <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-09-30net/mlx5: E-Switch, Fix double allocation of acl flow counterMoshe Shemesh2-5/+11
Flow counter is allocated in eswitch legacy acl setting functions without checking if already allocated by previous setting. Add a check to avoid such double allocation. Fixes: 07bab9502641 ("net/mlx5: E-Switch, Refactor eswitch ingress acl codes") Fixes: ea651a86d468 ("net/mlx5: E-Switch, Refactor eswitch egress acl codes") Signed-off-by: Moshe Shemesh <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-09-30net/mlx5e: Improve MQPRIO resiliencyTariq Toukan2-32/+80
* Add netdev->tc_to_txq rollback in case of failure in mlx5e_update_netdev_queues(). * Fix broken transition between the two modes: MQPRIO DCB mode with tc==8, and MQPRIO channel mode. * Disable MQPRIO channel mode if re-attaching with a different number of channels. * Improve code sharing. Fixes: ec60c4581bd9 ("net/mlx5e: Support MQPRIO channel mode") Signed-off-by: Tariq Toukan <[email protected]> Reviewed-by: Maxim Mikityanskiy <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-09-30net/mlx5e: Keep the value for maximum number of channels in-syncTariq Toukan6-34/+57
The value for maximum number of channels is first calculated based on the netdev's profile and current function resources (specifically, number of MSIX vectors, which depends among other things on the number of online cores in the system). This value is then used to calculate the netdev's number of rxqs/txqs. Once created (by alloc_etherdev_mqs), the number of netdev's rxqs/txqs is constant and we must not exceed it. To achieve this, keep the maximum number of channels in sync upon any netdevice re-attach. Use mlx5e_get_max_num_channels() for calculating the number of netdev's rxqs/txqs. After netdev is created, use mlx5e_calc_max_nch() (which coinsiders core device resources, profile, and netdev) to init or update priv->max_nch. Before this patch, the value of priv->max_nch might get out of sync, mistakenly allowing accesses to out-of-bounds objects, which would crash the system. Track the number of channels stats structures used in a separate field, as they are persistent to suspend/resume operations. All the collected stats of every channel index that ever existed should be preserved. They are reset only when struct mlx5e_priv is, in mlx5e_priv_cleanup(), which is part of the profile changing flow. There is no point anymore in blocking a profile change due to max_nch mismatch in mlx5e_netdev_change_profile(). Remove the limitation. Fixes: a1f240f18017 ("net/mlx5e: Adjust to max number of channles when re-attaching") Signed-off-by: Tariq Toukan <[email protected]> Reviewed-by: Aya Levin <[email protected]> Reviewed-by: Maxim Mikityanskiy <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-09-30net/mlx5e: IPSEC RX, enable checksum completeRaed Salem1-6/+1
Currently in Rx data path IPsec crypto offloaded packets uses csum_none flag, so checksum is handled by the stack, this naturally have some performance/cpu utilization impact on such flows. As Nvidia NIC starting from ConnectX6DX provides checksum complete value out of the box also for such flows there is no sense in taking csum_none path, furthermore the stack (xfrm) have the method to handle checksum complete corrections for such flows i.e. IPsec trailer removal and consequently checksum value adjustment. Because of the above and in addition the ConnectX6DX is the first HW which supports IPsec crypto offload then it is safe to report csum complete for IPsec offloaded traffic. Fixes: b2ac7541e377 ("net/mlx5e: IPsec: Add Connect-X IPsec Rx data path offload") Signed-off-by: Raed Salem <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-09-30Merge tag 'gpio-fixes-for-v5.15-rc4' of ↵Linus Torvalds1-9/+2
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: "A single fix for the gpio-pca953x driver and two commits updating the MAINTAINERS entries for Mun Yew Tham (GPIO specific) and myself (treewide after a change in professional situation). Summary: - don't ignore I2C errors in gpio-pca953x - update MAINTAINERS entries for Mun Yew Tham and myself" * tag 'gpio-fixes-for-v5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: MAINTAINERS: Update Mun Yew Tham as Altera Pio Driver maintainer MAINTAINERS: update my email address gpio: pca953x: do not ignore i2c errors
2021-09-30Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds16-47/+113
Pull rdma fixes from Jason Gunthorpe: "Not much too exciting here, although two syzkaller bugs that seem to have 9 lives may have finally been squashed. Several core bugs and a batch of driver bug fixes: - Fix compilation problems in qib and hfi1 - Do not corrupt the joined multicast group state when using SEND_ONLY - Several CMA bugs, a reference leak for listening and two syzkaller crashers - Various bug fixes for irdma - Fix a Sleeping while atomic bug in usnic - Properly sanitize kernel pointers in dmesg - Two bugs in the 64b CQE support for hns" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/hns: Add the check of the CQE size of the user space RDMA/hns: Fix the size setting error when copying CQE in clean_cq() RDMA/hfi1: Fix kernel pointer leak RDMA/usnic: Lock VF with mutex instead of spinlock RDMA/hns: Work around broken constant propagation in gcc 8 RDMA/cma: Ensure rdma_addr_cancel() happens before issuing more requests RDMA/cma: Do not change route.addr.src_addr.ss_family RDMA/irdma: Report correct WC error when there are MW bind errors RDMA/irdma: Report correct WC error when transport retry counter is exceeded RDMA/irdma: Validate number of CQ entries on create CQ RDMA/irdma: Skip CQP ring during a reset MAINTAINERS: Update Broadcom RDMA maintainers RDMA/cma: Fix listener leak in rdma_cma_listen_on_all() failure IB/cma: Do not send IGMP leaves for sendonly Multicast groups IB/qib: Fix clang confusion of NULL pointer comparison
2021-09-30net: stmmac: fix EEE init issue when paired with EEE capable PHYsWong Vee Khee1-0/+4
When STMMAC is paired with Energy-Efficient Ethernet(EEE) capable PHY, and the PHY is advertising EEE by default, we need to enable EEE on the xPCS side too, instead of having user to manually trigger the enabling config via ethtool. Fixed this by adding xpcs_config_eee() call in stmmac_eee_init(). Fixes: 7617af3d1a5e ("net: pcs: Introducing support for DWC xpcs Energy Efficient Ethernet") Cc: Michael Sit Wei Hong <[email protected]> Signed-off-by: Wong Vee Khee <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-30soc: ti: omap-prm: Fix external abort for am335x prussTony Lindgren1-12/+15
Starting with v5.15-rc1, we may now see some am335x beaglebone black device produce the following error on pruss probe: Unhandled fault: external abort on non-linefetch (0x1008) at 0xe0326000 This has started with the enabling of pruss for am335x in the dts files. Turns out the is caused by the PRM reset handling not waiting for the reset bit to clear. To fix the issue, let's always wait for the reset bit to clear, even if there is a separate reset status register. We attempted to fix a similar issue for dra7 iva with a udelay() in commit effe89e40037 ("soc: ti: omap-prm: Fix occasional abort on reset deassert for dra7 iva"). There is no longer a need for the udelay() for dra7 iva reset either with the check added for reset bit clearing. Cc: Drew Fustini <[email protected]> Cc: Grygorii Strashko <[email protected]> Cc: "H. Nikolaus Schaller" <[email protected]> Cc: Robert Nelson <[email protected]> Cc: Yongqin Liu <[email protected]> Fixes: effe89e40037 ("soc: ti: omap-prm: Fix occasional abort on reset deassert for dra7 iva") Reported-by: Matti Vaittinen <[email protected]> Tested-by: Matti Vaittinen <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2021-09-30ptp: Fix ptp_kvm_getcrosststamp issue for x86 ptp_kvmZelin Deng1-7/+2
hv_clock is preallocated to have only HVC_BOOT_ARRAY_SIZE (64) elements; if the PTP_SYS_OFFSET_PRECISE ioctl is executed on vCPUs whose index is 64 of higher, retrieving the struct pvclock_vcpu_time_info pointer with "src = &hv_clock[cpu].pvti" will result in an out-of-bounds access and a wild pointer. Change it to "this_cpu_pvti()" which is guaranteed to be valid. Fixes: 95a3d4454bb1 ("Switch kvmclock data to a PER_CPU variable") Signed-off-by: Zelin Deng <[email protected]> Cc: <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-09-29nbd: use shifts rather than multipliesNick Desaulniers1-12/+17
commit fad7cd3310db ("nbd: add the check to prevent overflow in __nbd_ioctl()") raised an issue from the fallback helpers added in commit f0907827a8a9 ("compiler.h: enable builtin overflow checkers and add fallback code") ERROR: modpost: "__divdi3" [drivers/block/nbd.ko] undefined! As Stephen Rothwell notes: The added check_mul_overflow() call is being passed 64 bit values. COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW is not set for this build (see include/linux/overflow.h). Specifically, the helpers for checking whether the results of a multiplication overflowed (__unsigned_mul_overflow, __signed_add_overflow) use the division operator when !COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW. This is problematic for 64b operands on 32b hosts. This was fixed upstream by commit 76ae847497bc ("Documentation: raise minimum supported version of GCC to 5.1") which is not suitable to be backported to stable. Further, __builtin_mul_overflow() would emit a libcall to a compiler-rt-only symbol when compiling with clang < 14 for 32b targets. ld.lld: error: undefined symbol: __mulodi4 In order to keep stable buildable with GCC 4.9 and clang < 14, modify struct nbd_config to instead track the number of bits of the block size; reconstructing the block size using runtime checked shifts that are not problematic for those compilers and in a ways that can be backported to stable. In nbd_set_size, we do validate that the value of blksize must be a power of two (POT) and is in the range of [512, PAGE_SIZE] (both inclusive). This does modify the debugfs interface. Cc: [email protected] Cc: Arnd Bergmann <[email protected]> Cc: Rasmus Villemoes <[email protected]> Link: https://github.com/ClangBuiltLinux/linux/issues/1438 Link: https://lore.kernel.org/all/[email protected]/ Link: https://lore.kernel.org/stable/CAHk-=whiQBofgis_rkniz8GBP9wZtSZdcDEffgSLO62BUGV3gg@mail.gmail.com/ Reported-by: Naresh Kamboju <[email protected]> Reported-by: Nathan Chancellor <[email protected]> Reported-by: Stephen Rothwell <[email protected]> Suggested-by: Kees Cook <[email protected]> Suggested-by: Linus Torvalds <[email protected]> Suggested-by: Pavel Machek <[email protected]> Signed-off-by: Nick Desaulniers <[email protected]> Reviewed-by: Josef Bacik <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2021-09-29gpio: pca953x: do not ignore i2c errorsAndrey Gusakov1-9/+2
Per gpio_chip interface, error shall be proparated to the caller. Attempt to silent diagnostics by returning zero (as written in the comment) is plain wrong, because the zero return can be interpreted by the caller as the gpio value. Cc: [email protected] Signed-off-by: Andrey Gusakov <[email protected]> Signed-off-by: Nikita Yushchenko <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
2021-09-29Merge branch 'linus' of ↵Linus Torvalds1-6/+8
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This contains fixes for a resource leak in ccp as well as stack corruption in x86/sm4" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: x86/sm4 - Fix frame pointer stack corruption crypto: ccp - fix resource leaks in ccp_run_aes_gcm_cmd()
2021-09-29net: phy: bcm7xxx: Fixed indirect MMD operationsFlorian Fainelli1-4/+110
When EEE support was added to the 28nm EPHY it was assumed that it would be able to support the standard clause 45 over clause 22 register access method. It turns out that the PHY does not support that, which is the very reason for using the indirect shadow mode 2 bank 3 access method. Implement {read,write}_mmd to allow the standard PHY library routines pertaining to EEE querying and configuration to work correctly on these PHYs. This forces us to implement a __phy_set_clr_bits() function that does not grab the MDIO bus lock since the PHY driver's {read,write}_mmd functions are always called with that lock held. Fixes: 83ee102a6998 ("net: phy: bcm7xxx: add support for 28nm EPHY") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-29net: hns3: disable firmware compatible features when uninstall PFGuangbin Huang1-8/+13
Currently, the firmware compatible features are enabled in PF driver initialization process, but they are not disabled in PF driver deinitialization process and firmware keeps these features in enabled status. In this case, if load an old PF driver (for example, in VM) which not support the firmware compatible features, firmware will still send mailbox message to PF when link status changed and PF will print "un-supported mailbox message, code = 201". To fix this problem, disable these firmware compatible features in PF driver deinitialization process. Fixes: ed8fb4b262ae ("net: hns3: add link change event report") Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-29net: hns3: fix always enable rx vlan filter problem after selftestGuangbin Huang1-2/+4
Currently, the rx vlan filter will always be disabled before selftest and be enabled after selftest as the rx vlan filter feature is fixed on in old device earlier than V3. However, this feature is not fixed in some new devices and it can be disabled by user. In this case, it is wrong if rx vlan filter is enabled after selftest. So fix it. Fixes: bcc26e8dc432 ("net: hns3: remove unused code in hns3_self_test()") Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-29net: hns3: PF enable promisc for VF when mac table is overflowGuangbin Huang1-2/+6
If unicast mac address table is full, and user add a new mac address, the unicast promisc needs to be enabled for the new unicast mac address can be used. So does the multicast promisc. Now this feature has been implemented for PF, and VF should be implemented too. When the mac table of VF is overflow, PF will enable promisc for this VF. Fixes: 1e6e76101fd9 ("net: hns3: configure promisc mode for VF asynchronously") Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-29net: hns3: fix show wrong state when add existing uc mac addressJian Shen1-10/+9
Currently, if function adds an existing unicast mac address, eventhough driver will not add this address into hardware, but it will return 0 in function hclge_add_uc_addr_common(). It will cause the state of this unicast mac address is ACTIVE in driver, but it should be in TO-ADD state. To fix this problem, function hclge_add_uc_addr_common() returns -EEXIST if mac address is existing, and delete two error log to avoid printing them all the time after this modification. Fixes: 72110b567479 ("net: hns3: return 0 and print warning when hit duplicate MAC") Signed-off-by: Jian Shen <[email protected]> Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.